Is there a way to achieve this(setting the surface type) when you implement the ExoPlayer in jetpack compose? Looks like function to set surface type is private. Using reflection to access the private method is risky as ExoPlayer's API changes radpidly. I'm also stuck at this issue. Really appreciate any help.

How are these files structured? You mentioned the first one is a server component where you can retrieve the cookies and pass it to the other file, but where is the api.ts and what is it? Isn’t it a server component then?

is the .lic file placed in both the locations shown in the error? That should help get past this.

dbutils.fs.rm("dbfs:/FileStore/tables/Staging/Customer/_delta_log/", recurse=True)

I think this github issue talks about the same thing, which is also what I did https://github.com/tensorflow/tfjs/issues/7394#issuecomment-1794089089

is there any solution about this? I had a same problem

Did you find how to implement it? What I know so far (I'm new to mobile dev) if it helps anyone else who lands here, your service returns both a Refresh Token and an Access Token, the AT should have a short lifespan and your RT is used just once to get a new AT and a new RT. So with this in mind what needs to happen is that you would need to store your RT, if the Biometric Auth succeeds you go and grab the corresponding RT, send that back to your service. I don't know if there is a library that helps with this, i guess you could also store the user and pwd instead of the token and send that for auth. I'm also looking for an example of some sort.

Will this approach work for Oauth 2.0 access policy as well? The above methods discussed are for shared access policy which our vendor is not willing to share as they prefer Oauth

I am using NextJS 15 (app router) and Chakra UI version 3.2.0 and also getting the same error. Even though I added suppressHydrationWarning property as per instructions from ChakraUI Docs. It happens when we use default ColorModeProvider in components/ui/provider.jsx

I caught my husband so many times through his chats and all about cheating on me and when i told him he always claims that he has changed and all. right now he hides his phone from me and i still guess he is cheating cause i could not break into his phone any more so i was referred to a hacker named FRED who i ran to for help and this hacker was able to break into his phone and proved me with the access to my husband phone without my spouse knowing about the hack. Right in my phone I have all my husband's daily activities . I got to read all his chats, texts, calls, WhatsApp, Facebook, and many more. This hacker is really great, thank you. Did you find this review helpful? contact him via Gmail fredvalcyberghost @gm ail .com and you can text,call or whatsapp him on +15177981808 or +19782951763

This worked well

//*[local-name()='wsReturn']

I have the same problem when using add_metric() to add metric "f1-macro" in PyCaret. My code is as following:

def my_f1(y_true, y_pred):
    return f1_score(y_true, y_pred, average='macro', )

my_f1 = make_scorer(my_f1, greater_is_better=True)
add_metric('f1_macro', 'F1-Macro', my_f1)

best = s.compare_models(sort='f1-macro', n_select=3)

It returns "AttributeError: '_Scorer' object has no attribute 'name'"

I'm implementing a http server to support range requests, but I cannot make browsers to send http range requests to my server. If I send a http range response, the browsers(both firefox and chrome) do not send any more http range requests to get the remain part of the file, so what's the correct way to init browsers to send more http range requests to get the whole file?

daisyUI now has a theme controller. See below:

DaisyUI theme-controller

okay tanksasdsadsadsada asdasdsadsadsd

You can download this file, this is the complete protocol from the manufacturer https://arinst.net/files/Protocol.zip

I have the same problem as described here and could not find the solution from the answers. Is there any other reason why scipy cannot be installed? How could I install it on a-shell?

Thank you, I will give these suggestions a try and report back!

has this thread already been solved? im facing the same problem.

Please tell me how you fixed this. I'm currently having the exact issue. The carousel works on desktop view, but on mobile, it's frozen.

Did you Ever figure this out ? Happen to me 2 days ago also.. sol scan looks good on mine here is my address

9JKrKwcemBHvkbGmo3EqrrZ5bsJRc7cZ4DNcupP9F2J9

Problem solved! In my settings.py MEDIA_URL should be real Internet URL.

Can someone please tell me what code to use and where to put it in a wordpress installed website?

Is there something to put in the custom code or htaccess file?

I have the same error when trying to integrate the latest webpack 5.96.1 into a vue.js app. I avoid this error by downgrade to 5.95.0

message? message message message message. ai generated message.

This article perfectly explains the importance of user-friendly designs. A website design company phoenix can definitely help you achieve that.

I’m facing the same issue. Have you found a solution for it? In development, the cookies persist in the browser, but in production on Vercel (Next.js + Node.js), the cookies are cleared after a refresh.

It's actually not an issue, but a feature, related to daylight savings time.

Can you let us see the code of how you are declaring the date you are trying to insert in the database?

please did u find a solution for this issue ?

Were you ever able to resolve this error? I see the same thing in nifi 1.23

thanks,yeah use correct file allocation in python and im port numpy

I have the same problem I deleted the default VPC and everything linked to it while doing some clean up (when I was getting charged for something), Sure enough I ignored the warnings. Upon looking in to the documents it turns out that it is just a pre defined VPC for quick usage u can create one and use it like default VPC by looking at the specs here

https://docs.aws.amazon.com/vpc/latest/userguide/default-vpc-components.html

@Dharmalingam Arumugam, Do you have a working solution to upload a file in Saucelabs mobile browser using Selenium webdriver for testing.

i have the same problem. Is there a different step to do? i put the app-ads.txt in the marketing url of my app page, like it said on the documentation.

Did you solve it?

In fact, I am facing the same problem, but you can try adding any text before adding the tag for example : tag:"text$your tag ",

Hope this helps you

Do you have your answer? I have a similar problem

My manifest is just like you suggested yet google keeps complaining. enter image description here

enter image description here

You could run something like ALTER TABLE <database>.<table> MODIFY SETTING enable_block_number_column = 0 and that should stop the errors. Is this a local deployment? (don't have enough reputation to comment, otherwise would)

Here see if there's anything useful here https://firebase.google.com/docs/cloud-messaging/ios/send-image

I am seeing the exact same thing.

I know that file share permissions can trip you up with fslogix but the same message I am getting of: "Querying computer's fully qualified distinguished name failed. (Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.)" indicates an issue with resolving to Entra ID that I am not seeing on on-prem joined Session Hosts.

Were you able to find a resolution?

If someone ends up here doing node project and using vercel, I posted a dirty solution to fix this problem, perhaps it will be useful - https://github.com/scottie1984/swagger-ui-express/issues/339#issuecomment-2491854431

How do you get it to paste into the email. Mine is remaining on the excel sheet.

Great! If you already have two macros to move data between tabs in Excel, I can help you refine them or integrate them to compare data across different sheets. Could you provide the existing macros or describe their functionality? This will help me understand what you're trying to accomplish with the data transfer, and how to potentially adjust the macros for your comparison needs.

If you're looking to compare data while moving it, we could:

• Modify existing macros to include comparison logic between two columns (across sheets).
• Add checks to ensure the data matches before performing the data transfer or move.

Feel free to share the macros or explain the steps you're looking to automate!

It has been nearly 9 years, have you found a solution for this?

now works with ng serve --host 0.0.0.0

Sorted it, it was very easy honestly I am so surprised you didn't implement it yet mate

JSON Crack app looks good, thank you

The question contains the answer :) I marked it with a blue circle.

There a multitude of reasons you can get blank pages. The first suggestion is right click on the report in solution explorer and select View Code from the dropdown. Use Ctrl + F to find "/Body" tag and make sure you set the width to 1In. Do the same if "TablixOuter" is in the report when you use CTRL + F (some reports don't have TablixOuter but all have /Body). Then hit Ctrl + S to save. DO NOT go back to the report design view. Deploy it and then try running the report. Please let me know if this does not solve your issue. I have been writing SSRS reports for 8 Years and have many other solutions to try.

Did you ever figure this out Ma1? We are in similar situation now

The fold length of the balcony is 213 inches. The center of the oblong will extend out 12 inches. I need to find the degree of the half oblong.

I am trying to do the same, have you come to an solution?

Finally found the problem. KrakenD had set Same_Origin instead of Cross_Origin

Read this - it will save you a lot of time! 🙂 https://github.com/ClickHouse/CryptoHouse/blob/main/setup.sql

Before providing any suggestions at least make sure that they are correct. I have seen multiple posts suggesting to use email report extension. But this does not work. There is no option to provide the FROM EMAIL. so it does not work. Stop pasting useless answers and wasting people's time.

Do you know how to increase with not adjustable option - Applied account-level quota value

I have the same problem. can you please add an example of the query on the gateway, and how the Stiching.graphql file has been configured? Thanks in advance. Maurizio

I think you want to override the https://github.com/GoogleCloudPlatform/terraform-google-analytics-lakehouse/blob/main/versions.tf file. In that case you'll have to create one versions.tf in your parent module (that will override the one of the child module).

My issue ended up being not having my company's self signed certificate in my JDK's cacerts: https://stackoverflow.com/a/68596094/27576792

I have it disable two buttons at once, can I make it disable only the desired button?

using configuration via INI file is perfect when runniung python script during runtime. When starting my script in rc.local I get KeyError and script is aborted:

Nov 21 14:59:54 RaspiJura4 rc.local[916]: fileConfig('logging.ini') Nov 21 14:59:54 RaspiJura4 rc.local[916]: File "/usr/lib/python3.11/logging/config.py", line 71, in fileConfig Nov 21 14:59:54 RaspiJura4 rc.local[916]: formatters = _create_formatters(cp) Nov 21 14:59:54 RaspiJura4 rc.local[916]: ^^^^^^^^^^^^^^^^^^^^^^ Nov 21 14:59:54 RaspiJura4 rc.local[916]: File "/usr/lib/python3.11/logging/config.py", line 104, in _create_formatters Nov 21 14:59:54 RaspiJura4 rc.local[916]: flist = cp["formatters"]["keys"] Nov 21 14:59:54 RaspiJura4 rc.local[916]: ~~^^^^^^^^^^^^^^ Nov 21 14:59:54 RaspiJura4 rc.local[916]: File "/usr/lib/python3.11/configparser.py", line 979, in getitem Nov 21 14:59:54 RaspiJura4 rc.local[916]: raise KeyError(key) Nov 21 14:59:54 RaspiJura4 rc.local[916]: KeyError: 'formatters'

Is there any idea how to solve this? Best regards Pit

did anyone solve this (NOBRIDGE) ERROR Error: Exception in HostFunction: Unable to convert string to floating point value: "large"

Can you share you solution for that problem?

After delete cache folder, it's OK.

SD_MMC.remove("/"+ file.name());

dears, thanks for sharing knowledge. I noticed that when using concat OR & in excel, the double quotes in source cells if any, gets repeated when we copy paste the result to plain text or notepad. But if you just copy paste into a word document then the values show up perfectly fine.

Hey Is there anyone who can guide me...actually I would like to know how to create a customer or supplier using the Twinfield API. Could you please guide me on the following:

What API endpoint or URL should I use for creating a customer or supplier in Twinfield? What XML structure should I use in the request body to create a customer or supplier? Are there any specific parameters (such as company ID, customer/supplier code, etc.) I need to include in the request? What type of response should I expect after creating a customer or supplier? Any insights or examples would be greatly appreciated! Thanks for your help!

Is there any way to know the exact reason of 400 response code? I am getting that for invalid password as per password policy but I am not getting error description in response.

Anyone find the answer for this issue?

Spring 5.3.41 is a commercial release, available only to those who has subscribed the extended support.

Please check this link: https://spring.io/blog/2024/10/17/spring-framework-cve-2024-38819-and-cve-2024-38820-published

how to use byColumnNameAndValue(String columnName, String value) spec method, can you please share an example.

I have none of those in mine yet I am still getting this error message. Any thoughts please?

SELECT * FROM HRC_integration_key_map WHERE surrogate_id = <SURROGATE_ID>

You might try sending Volume Up as code 123 as this is what is described as working here from the "AB Shutter 3" device (which I've used in the past and can affirm it's worked.)

https://shkspr.mobi/blog/2016/02/cheap-bluetooth-buttons-and-linux/

"It turns out that the iOS buttons sends Volume Up (key 123) whereas the Android button sends Enter (key 36)."

Please let us know if that fixed anything!

Unfortunately, that doesnt work. No luck trying to find something from a big list. When the first name is not found, the whole job crashes

I've been trying to use the wildcard function for eventName (API call) but can't get the event to trigger - has anyone had success with this?

How do we get the dependent masters of vouchers through http api using xml, to export it from tally??

I am also facing the same issue if this has been resolved please anyone help for solve it.

Help will be appreciated.

Dev39

Hey i am facing the same issue. did you get the solution ?

look this: https://vuejs.org/tutorial/#step-12 and click 'show me' button

I have almost the same issue; We need to publish an Excel tool on our website (embedded with Iframe or Javascript) but the office script doesnt work. Is there any solutions for that? Or is there already a solution that we have missed?

BR Jakob

what will be the solution for this?

Thank you it works. but server started message is not shown

thankss bro this work for me, I was so confused for a few days

Maybe you can benefit from using ready libraries and not do all http stuff yourself? For example look into https://github.com/bay73/generic-ai/blob/main/README.md or https://github.com/aallam/openai-kotlin/blob/main/README.md

I am not able to run this on linux as well

But by using above solution existing data will be loss any other solution?

It's not an error. It's a warning. You can safely ignore it, although that package is not receiving updates, and it's not recommended for use in production.

You can check this link. https://github.com/orgs/nodejs/discussions/55774

If you want to find an effective Kubernetes service, please refer now: https://bizflycloud.vn/kubernetes-engine

upgrade to version 1.4.2 is ok

The problem was solved in this way: https://book.cakephp.org/5/en/orm/behaviors/translate.html#querying-translated-fields

The problem have solved: I changed the version to 2019.2, and , everything get OK

my_controller.value.intialize is false or local video from cache but for network video is true and working fine on iOS.

If still not working try to encode url: String videoUrl = "your_video_url"; String encodedUrl = Uri.encodeFull(videoUrl);

I am facing a situation. example.com/blog displays the blog page (excerpts). Click on any article. It is displayed. Click on a Page Number below. The site flashes 404. The blog section on the front page has the URL example.com/blog/blog. This works well. Is the setting like that, or do I have a problem?

How to remove the symbol on the Filter by price search bar in WooCommerce?

i have tried this command "netstat -ano | findstr :1099" but nothing is showing – help me

I need to use node18x，so how to avoid the error???

i am using struct in arduino. i am passing structure by reference. and accessing the members using -> and changing the value stored. but when function terminates and program returns to void loop the change didn't happened.

kindly help me resolve this please.

I faced the same issue (I think this is because the exam tester send a 0 as fd when there are no argv for the tester main. However, I did not find out how to pass it. Any updates? Thanks in advance!

Go to File -> Option -> Formulas -> uncheck R1C1 reference style