This error typically indicates an issue with the SSH handshake and also this could happen if the SSH server on the VM is blocked or misconfigured and also I would recommend you to reset the daemon with: service sshd restart and also try to restart the VS code and check if it is working.Also could you please confirm whether you have checked this link?

I developed a Flutter package that will help you with this. Check it out at https://github.com/keepdeploying/conversation_bubbles

I think the key problem is on the error message saying StorageContext is not JSON serializable?

Were you able to resolve this issue? I'm encountering the same problem on Ubuntu. The directory definitely exists, and I can even create a new folder through the Dart code during initialization. However, the main issue persists. I’ve tested the same setup on Windows, and it works perfectly—I'm able to get the devices on the network there. Could this be related to a permission issue on Ubuntu? Any insights would be greatly appreciated!

try uninstall opencv with cuda likely cuda device count is 1 perhaps that was is used by opencv when in yolo doesnt work im still try figure it out

Well boys I'll tell you what I've learned is that your trying to force or manipulate the app to scan beacons once you've murdered it. And you're doing that through a tas manager is that correct?. Hell wouldn't it be a whole lot easier to build an infrared night and heat sensing camer with activate with motion and activate with noise feature and if you're going that far you need to go from the window to he wall with it get some ultraviolet drippin of your Jaws with it, ya know what I'm saying? Mount a silenced 223 with a 30 in bull barrel wieghs like 45lbs most anoying think to carry to the 3rd floor of a book repository if you catch my drift. He got shot by 2 naked men before her ever made the turn on deely that took him in front of and past the damn book store. At least thats what photographic evidence would suggest unless theyve taken parts from 2 different films on 2 different sides and mixed matched them a little. Why were they naked? Well bc when you get to the otherside apperently when you strip ass naked you vanish like a damn ghost. Thats why i say if it ever gets that bad and with the way the world and you computer guys are running shit it llols like we might all be stripping naked and heading to the forrest. Do you see where im taking you with your wording in your code? Listen ill tell you for certain that everything you say or write can and will be used against you when "they" come back, and "they" idk...but thanks to you qe have a bounch of illuminated or outright vaporized invisible people ourlt here running around killing apps. Then when the app wakes up in his new reality hes made a slave bc of your wording. All of your wording has to be fixed. You actually have ppl out there coding using apocalyptic terms like how fucking ignorant can you geniouses be? Well its ppl like you that sent a fucking solid gold record player into deep space to play the intising sound of young school children on earth oh and some pretty noises like birds and bullfrogs as well. Like swriously? Who the hells in charge of shit like that? He needs a foot so far upnhis ass they have to call the foot doc over to the ass docs office to figure out whay sort of insteuments and emergency techniques theyre going to need too get his ass home once they pull that size 14 baseball golf cleet out of there. Seriously you don't kill an application and expect it to do everything you want when it gets to the otherside, bc if I am that application I'm going to fucking run your whole metaverse. Anyway a little friendly suggestions from one assassin to the other. Just bang and walk away. That's you're only hope.

I had similar problem. My solution remove apache2 sudo apt-get remove apache2

Paul

Auto like all facebook post on timeline console (easy) https://thailight.gumroad.com/l/vfledr?layout=profile

same question: I'm try updating the Android Gradle Plugin (AGP) to com.android.tools.build:gradle:8.9.0-alpha02,but still not working.

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

I am getting this error. How can i fix?

for me in liferay 7.4 ga 125 your ADT code not works. What i.m missing? maybe needs serviceLocator permissions?

Set a javascript global variable?

Worked for me when I downgraded to NumPy 1.26.4 enter image description here

please manage x,y digits on ^FO command

In C++ 26, a function called native_handle should return what you want: https://en.cppreference.com/w/cpp/io/basic_ofstream/native_handle

I am in love with crystal Riley

privileged access management(PAM) is now available as a platform feature in Google Cloud: https://cloud.google.com/iam/docs/pam-overview

Open and edit .slip file with this (in menu system).

https://www.sendbig.com/view-files/?Id=56594b85-be61-8a66-af11-5dfa08ffb0e3

I solve my issue using custom base query which check if there is token, if not, it will fetch token first, then customBaseQuery continue to fetch data. @Drew Reese Thank you very much for you help and hints.

Simple fix for me

Project Settings

Loving this, I also have a .cfg file that I'm trying to implement.. Super helpful from my router.. having backups config files, that I have to decipher and rewrite in order to use. Thanks for your advice AKX, sadly it's waaaay less effort to reconfigure the unreadable settings by hand.. I love computer sciences, but routers and printers make me long for the old days when we humans where just chillin in caves.

I am running into this exact issue. While doing an erase I see a black line created along my drag path. Once my path is complete the area along the path is erased. It doesnt erase while I am dragging only once the action is complete. Does anyone know how to enable blendMode.clear while dragging?

Check out this https://medium.com/@jonessunil9601/send-sms-in-ios-without-editing-7aa277b21470 works and does exactly what you're looking to do.

Were you able to resolve this issue?

Es una mierd* para el usuario final, que no está interesado en codificar. Queremos cosas que se instalen y simplemente funcionen.

I am running on a broken laptop that only runs RAM, yet you always keep fucking up my settings and it effects my phones, also that I try to not let collect any information.

I am always trying to erase history, you all will stop fucking up my system.

Hello @jkff and @Graham: I am having dataflow streaming pipeline, which uses WriteToBigQuery after reading from original source. I have similar requirement where I want to achieve two things: 1. handling WriteToBigQuery error records and 2. execute big query SQL which has to be executed only after WriteToBigQuery. For 2nd requirement: Approach mentioned by @jkff wont work for me as it will submit separate dataflow steaming job which will be async with original job. I have question about Approach mentioned by @Graham, If I do that way, will that get executed everytime there is streaming data coming from original source?

I am trying to use the script to pull in CBOE data - any luck someone could spell this out so I can ? what is Panda ?

My best guess is that you wanted to use v3 of the api but used v1 witch did not work maybe try using the v3 api like https://www.youtube.com/youtubei/v3/player?key=[MY API key]

I had the same issue, and I found that I declared a @Environment(.dismiss) in the parent view but never called it. Getting rid of it in the parent view solved it for me, so I wanted to share in case others have similar issues.

Further to the comment from @thepatel - it looks like it has now moved to https://play.google.com/store/apps/details?id=com.appsbybirbeck.android.nowplayinghistory

I have a little bit confusion. Can anyone please verify this Data Flow/Architecture..enter image description here

Facing the same. Opened this https://developers.facebook.com/community/threads/1217443149319715/?post_id=1217443152653048

Did you find any workaround?

To look up the coding horror article you might need the wayback machine

https://web.archive.org/web/20100218180335/http://www.codinghorror.com/blog/2007/03/primary-keys-ids-versus-guids.html

i am Unable to use non headless mode using selenium webdriver on render deployment in my local machine its properly working, this is my code please tell me how to work-

    chrome_options = webdriver.ChromeOptions()
    chrome_options.add_argument(f"user-data-dir={CHROME_PROFILE_PATH}")
    chrome_options.add_argument("--headless")
    chrome_options.add_argument("--disable-gpu")
    chrome_options.add_argument("--no-sandbox")
    chrome_options.add_argument("--disable-dev-shm-usage")

with webdriver.Chrome(service=Service(ChromeDriverManager().install()), options=chrome_options) as driver:

To answer to @phankieuphu with an image, I think the database in phphmyadmin is well set. Is it the right place to check that ?

👇For Modified Free Version Visit👇

https://allsoftscr.college/download/

why do they need to scan records if $nin or $ne contains only one value.

for eg: user | ispayed 1 | Y 2 | N

if i ask ispayed != 'Y', they still can scan the index and come to a decision right?

You mention you have indexes on the id of each table but do you have indexes on the foreign keys (a_id, b_id) in your example? And do you have and index for the column you use in the query if it is a common search?

I wanted to put this out there. I ordered the Funky Chicken Kit and I tried to contact, My Fabric Addition. I received the kit and the squares not right. I did talk to Jean Fletcher and she sent another kit. I opened the kit and it was still wrong with less materials. WHY WOULD SOMEONE DO THAT? THANK YOU, for reading letter. Sincerely, Rachel Hass

Please what if I have an html file, How do you make sure that this is rendered at the appropriate position. A situation whereby I have a whole web page to be placed inside the editor, within the webpage there are custom designed images. My challenge is how to place the customBlot in the proper position while other tags used the embedded quill blot. Is it something that is possible to achieve?

For instance, I want to get the thumbnail of a video inside the video tag. I want the thumbnail to be render in the position of the video tag; whenever I place the html inside the editor.

Could you solve it ? I have the same issue.

strong text**how to solve this problem?

import pandas as pd import matplotlib.pyplot as plt

error:

ImportError Traceback (most recent call last) ImportError: DLL load failed while importing _multiarray_umath: The specified module could not be found.

ImportError Traceback (most recent call last) ImportError: DLL load failed while importing _multiarray_umath: The specified module could not be found.

Traceback (most recent call last):

_tkinter.TclError: Can't find a usable init.tcl in the following directories:

This probably means that Tcl wasn't installed properly.

I am facing same error. If any knows, share the solution. I have also used in latest version of python, PyCharm and FreeSimpleGUI 5.1.1 Thank you

Did you ever solve this? Identical setup with identical problem... and I've tried those links..

im new to HA and struggling to get my head around everything. How to make the bar colors change based on the values? I want the NordPool electricity price data chart to show the high price bars red, middle orange, low green etc, but I want them to be set depending on the max price of the particular day, lets say, the max shown price of the cart today is 50 EUR, so the 80%-100% of the max price will show up red, 60%-80% orange etc. Currently I have them set as 0-10 EUR = blue 10-20 green etc. But that's not convenient if all the hourly prices of the day are, lets say in a range of 0-10 - then all the bars are shown in blue.

Can anybody reproduse this? you just need a /home/sound0.wav file...

https://discuss.ai.google.dev/t/10-memory-error-i-need-your-help/49620

Could you please share if this was achieved ?

Has anyone succeeded in obtaining a refresh token using Android .NET (i.e. former Xamarin)?

Asking for offline access and thereby getting into 'HasResolution == true' will inevitable fail.

Passing an IntentSenderRequest to ActivityResultLauncher.Launch() is failing with an error message: 'cannot cast IntentSenderRequest to Intent'

I almost about to give up on this and continue using the deprecated GoogleSignInClient API.

Please help!

I have the same issue. Did you fix it?

On which website did you find the animals API? I clicked the link https://freetestapi.com/api/v1/animals? in Chrome browser, and there was an error...

Can we implement the same using expo-web-browser?

as Simon Mourier Commented the solution was to add <UseWPF>true</UseWPF> to .csproj project file

<Project Sdk="Microsoft.NET.Sdk">
  <PropertyGroup>
    <TargetFramework>net8.0-windows10.0.19041.0</TargetFramework>
    <TargetPlatformMinVersion>10.0.17763.0</TargetPlatformMinVersion>
    <UseWPF>true</UseWPF>

Was related to How can I reference WindowsBase in .Net5?

can you put the anchor through a URL shortener?

Have you found a solution? I have the same problem.

you have to use @SpringBootTest annotation in your test class. more infos see here https://spring.io/guides/gs/testing-web

@Harald K, Is there any way to configure the listener in OSGI ? we have developed plugins using osgi and are facing the same issue as above.

The same problem... And it’s not clear how to solve it. There are no more options in the documentation

I had a similar problem. Ubuntu system, neovim of v0.4 I followed this article to update my neovim

https://medium.com/@leonardormlins/easiest-way-to-update-neovim-on-ubuntu-a283c66d5322

This upgraded my neovim to v0.7 and my init.lua was sourced.

managed to solve this in the end. For anyone having the same issue, run

find / -name ".condarc" 2>/dev/null

and see how many other .condarc files exist in your machine.

I have two queries-

Query 1-

SELECT COUNT(*) AS count FROM `comments` INNER JOIN `replies` ON `comments`.`comment_id` = `replies`.`reply_comm_id` WHERE CONCAT (`comment_message`, `reply_message`) LIKE ('%test%') AND `comments`.`comm_blog_id`=45;

Result for "query 1"-

Query 2-

SELECT (SELECT COUNT(*) FROM `comments` WHERE `comment_message` LIKE '%test%' AND `comm_blog_id` = 45) + (SELECT COUNT(*) FROM `replies` WHERE `reply_message` LIKE '%test%' AND `reply_blog_id` = 45) AS total_count;

Result for "query 2"-

The following are the tables-

"Comments" table-

"Replies" table-

Both have different results, but I think both "queries" are correct. Can anyone tell me which one I have to use for searching the data/string/tag/word/words (like- "test", or "test comment") from the two "tables"? Suppose I have a tag like test or test comment and I want to search this same tag in both the replies and comments tables of the comment_message and reply_message rows and count how many times it is coming/used.

All the answers were not working for me, I finally reinstalled the IIS fixed it.

Thanks a lot. I solve the issues.

I have a very similar situation re necessary client work. Would you be willing to share with me if a legal method was obtained?

Kind regards, James

I'm using Replit and it can't find windows.h.... any ideas?

RUNAS ERROR: Unable to run - cmd.exe 1326: Username or Password is incorrect

I encounter with this error after hitting cmd command after I create and give administrive to mentioned user. I tried every possible password. just numbers, just letters, combined them. what needs to do in this situation? Is anyone can help me?

De casualidad se halló solución a esto? Estoy realizando un proyecto escolar donde necesito guardar las fotos en una carpeta dentro de mi proyecto y enviar la ruta a la BD pero no encuentro como hacerlo. Agradecería se me dicen se se halló la solución y cuál fue.

could you please share your Azure Function code if possible, without secret credentials?

Thanks.

the ec2 may be running into dhcp issue. specifically dhclient unable to renew expired lease on ip address due to time change. see https://access.redhat.com/errata/RHBA-2020:1858 and the referenced bug https://bugzilla.redhat.com/show_bug.cgi?id=1729211

com.google.android.material.textfield.TextInputEditText{b81a487 VF.D..CL. ........ 0,0-984,196}

Did you make custom action for .NET? I found advanced installer is an option but now sure it is similar to Wix

Thank you for your answers, I have been thinking about your suggestions and I have done some more testing.

Example code where errors from play() are handled:

document.addEventListener('DOMContentLoaded', () => {
    const videoBox = document.getElementById('video-box');

    const video = document.createElement('video');
    videoBox.replaceChildren(video);

    setInterval(async () => {
        try {
            await video.play();
        } catch (error) {
            console.warn("error from play()");
        }
    }, 1000);

    setInterval(() => {
        video.load();
    }, 2000);
});

It seems to work without warnings. Except when I navigate away from the page and do something else for a few minutes, when I check again I see my warning has been logged a couple times.

Now when I do not await the promise:

document.addEventListener('DOMContentLoaded', () => {
    const videoBox = document.getElementById('video-box');

    const video = document.createElement('video');
    videoBox.replaceChildren(video);

    setInterval(async () => {
        video.play();
    }, 1000);

    setInterval(() => {
        video.load();
    }, 2000);
});

I get the familiar error: Uncaught (in promise) DOMException: The fetching process for the media resource was aborted by the user agent at the user's request.. But the backtrace points to the line with load(), not play()!

With the call to play() removed completely, I cannot get any error to show up:

document.addEventListener('DOMContentLoaded', () => {
    const videoBox = document.getElementById('video-box');

    const video = document.createElement('video');
    videoBox.replaceChildren(video);

    setInterval(() => {
        video.load();
    }, 2000);
});

This lines up with what @KLASANGUI quoted from the documentation:

Calling load() aborts all ongoing operations involving this media element

The process of aborting any ongoing activities will cause any outstanding Promises returned by play() being fulfilled or rejected as appropriate based on their status before the loading of new media can begin. Pending play promises are aborted with an "AbortError" DOMException.

The backtrace points to load(), which is somewhat confusing. While load() is what triggers the error, the play() method is where the exception is actually raised and needs to be caught. Without a call to play() anywhere, there is no error.

I am inclined to accept @KLASANGUI's answer, but it is the most downvoted one. If you disagree with their answer and my reasoning here, can you explain why?

https://github.com/spring-projects/sts4/wiki/Previous-Versions/723da72be5fce9fc64567281212700aed5fb2edd

this URL is to download 4.11 sts version

this URL for all older versions:

https://github.com/spring-projects/sts4/wiki/Previous-Versions

See https://aws.amazon.com/about-aws/whats-new/2024/05/amazon-ec2-api-public-endorsement-key-nitrotpm/ , where an API is added to fetch the EK from a Nitro TPM.

what do I if I added >>If timer equal to zero then -1>> if I play before the timer it will subtract 1

I am running into this issue where we had to use a phone with sms to verify the account. We do not want this number publicly visible. You mentioned changing to a different number. Did you have to go through the verification process all over again with this new number, or were you able to update the listed number through some type of setting? It says you can change the information at any time through the payment profiles, but this did not work for us.

That (#19) works (if print(wb.properties) is added) but is there a way to also have it return the name of the file? Then it becomes useful in a batch scan of xls files.

Some one is jacking with my Wi-Fi camera and one name is leavit the other is Tahiti if you could help me there’s all kinds of cartoon looking naked people on there

I am facing same issue, do you have any lead?

In vite import.meta.env.SOME_KEY. See https://vite.dev/guide/env-and-mode

the answer is in this video from 10:20 to 11:04 Login with Google

django-heroku is now deprecated.

This is very useful code, but I need to know how to limit the output to folders. I see there is a -Directory setting, but I'm unable to get it to work.

Below is a sample of my code. Any help would be greatly appreciated.

$FileFirst4Char=$file._Name.substring(0,4)
$FolderSearchStr=$dxfNetworkFolder + $FileFirst4Char+"*"
if (($namefromdir=(get-item "$FolderSearchStr").fullname) | select-object -First 1) {
    $dxfNetworkFolder=$namefromdir
    }
    else {
    $dxfNetworkFolder=$dxfNetworkFolder + "MISCELLANEOUS - DRAWINGS"
}

Good afternoon

Dear Sir, I would like to ask you if you have the same problem regarding the options for tables, projects, data sources. When we try to run or enter them, we get an error indicating that they do not exist. Do you have the same error? And if not, could you tell me how I could solve it? Oh, it's just that this free version has these limitations.

This solves the problem using "typescript": "^5.6.3" or downgrade the @types/next-intl next-intl routing.ts giving TS2554: Expected 0 arguments, but got 1

For anyone similarly trying to test compaction, This tutorial gave me all the steps needed -

https://devopstar.com/2023/11/18/lets-try-aws-glue-automatic-compaction-for-apache-iceberg/

I guess I would have three rules. Rule ONE which has A as it's input and temp(B) as it's output. And rule TWO and THREE which has B as it's input and C and D as it's output.

Would this make sense. Or is this what you have? Otherwise, could you post a minimal example?

mv gs.exe gs.zip

worked great!

did you find a solution to this?

did you manage to load the 2013 data ? I can only load the 2019 wave, as with 2013 I get "std::bad_alloc "

I have exactly the same question. macosx. anyone can help?

Degrading the python version solves the problem? I'm experiencing something like this, Please Help... (T.T)

I've also followed the instructions from the official web but still error:

C:\Windows\System32>.env\Scripts\activate

(.env) C:\Windows\System32>pip install -U spacy
Collecting spacy
  Using cached spacy-3.8.2.tar.gz (1.3 MB)
  Installing build dependencies ... error
  error: subprocess-exited-with-error

  × pip subprocess to install build dependencies did not run successfully.
  │ exit code: 1
  ╰─> [102 lines of output]
      Ignoring numpy: markers 'python_version < "3.9"' don't match your environment
      Collecting setuptools
        Using cached setuptools-75.5.0-py3-none-any.whl.metadata (6.8 kB)
      Collecting cython<3.0,>=0.25
        Using cached Cython-0.29.37-py2.py3-none-any.whl.metadata (3.1 kB)
      Collecting cymem<2.1.0,>=2.0.2
        Using cached cymem-2.0.8-cp313-cp313-win_amd64.whl
      Collecting preshed<3.1.0,>=3.0.2
        Using cached preshed-3.0.9.tar.gz (14 kB)
        Installing build dependencies: started
        Installing build dependencies: finished with status 'done'
        Getting requirements to build wheel: started
        Getting requirements to build wheel: finished with status 'done'
        Preparing metadata (pyproject.toml): started
        Preparing metadata (pyproject.toml): finished with status 'done'
      Collecting murmurhash<1.1.0,>=0.28.0
        Using cached murmurhash-1.0.10-cp313-cp313-win_amd64.whl
      Collecting thinc<8.4.0,>=8.3.0
        Using cached thinc-8.3.2.tar.gz (193 kB)
        Installing build dependencies: started
        Installing build dependencies: finished with status 'error'
        error: subprocess-exited-with-error

        pip subprocess to install build dependencies did not run successfully.
        exit code: 1

        [64 lines of output]
        Ignoring numpy: markers 'python_version < "3.9"' don't match your environment
        Collecting setuptools
          Using cached setuptools-75.5.0-py3-none-any.whl.metadata (6.8 kB)
        Collecting cython<3.0,>=0.25
          Using cached Cython-0.29.37-py2.py3-none-any.whl.metadata (3.1 kB)
        Collecting murmurhash<1.1.0,>=1.0.2
          Using cached murmurhash-1.0.10-cp313-cp313-win_amd64.whl
        Collecting cymem<2.1.0,>=2.0.2
          Using cached cymem-2.0.8-cp313-cp313-win_amd64.whl
        Collecting preshed<3.1.0,>=3.0.2
          Using cached preshed-3.0.9.tar.gz (14 kB)
          Installing build dependencies: started
          Installing build dependencies: finished with status 'done'
          Getting requirements to build wheel: started
          Getting requirements to build wheel: finished with status 'done'
          Preparing metadata (pyproject.toml): started
          Preparing metadata (pyproject.toml): finished with status 'done'
        Collecting blis<1.1.0,>=1.0.0
          Using cached blis-1.0.1.tar.gz (3.6 MB)
          Installing build dependencies: started
          Installing build dependencies: finished with status 'done'
          Getting requirements to build wheel: started
          Getting requirements to build wheel: finished with status 'done'
          Preparing metadata (pyproject.toml): started
          Preparing metadata (pyproject.toml): finished with status 'done'
        Collecting numpy<2.1.0,>=2.0.0
          Using cached numpy-2.0.2.tar.gz (18.9 MB)
          Installing build dependencies: started
          Installing build dependencies: finished with status 'done'
          Getting requirements to build wheel: started
          Getting requirements to build wheel: finished with status 'done'
          Installing backend dependencies: started
          Installing backend dependencies: finished with status 'done'
          Preparing metadata (pyproject.toml): started
          Preparing metadata (pyproject.toml): finished with status 'error'
          error: subprocess-exited-with-error

          Preparing metadata (pyproject.toml) did not run successfully.
          exit code: 1

          [12 lines of output]
          + C:\Windows\System32\.env\Scripts\python.exe C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\vendored-meson\meson\meson.py setup C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867 C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm -Dbuildtype=release -Db_ndebug=if-release -Db_vscrt=md --native-file=C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm\meson-python-native-file.ini
          The Meson build system
          Version: 1.4.99
          Source dir: C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867
          Build dir: C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm
          Build type: native build
          Project name: NumPy
          Project version: 2.0.2

          ..\meson.build:1:0: ERROR: Compiler cl cannot compile programs.

          A full log can be found at C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm\meson-logs\meson-log.txt
          [end of output]

          note: This error originates from a subprocess, and is likely not a problem with pip.
        error: metadata-generation-failed

        Encountered error while generating package metadata.

        See above for output.

        note: This is an issue with the package mentioned above, not pip.
        hint: See above for details.
        [end of output]

        note: This error originates from a subprocess, and is likely not a problem with pip.
      error: subprocess-exited-with-error

      pip subprocess to install build dependencies did not run successfully.
      exit code: 1

      See above for output.

      note: This error originates from a subprocess, and is likely not a problem with pip.
      [end of output]

  note: This error originates from a subprocess, and is likely not a problem with pip.

[notice] A new release of pip is available: 24.2 -> 24.3.1
[notice] To update, run: python.exe -m pip install --upgrade pip
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

(.env) C:\Windows\System32>

No, it's not cause of the game running. You can test it while running any 2-3 programs, just alt tab so the freePIE will be 3rd or 4th in alt tab order and monitor it with Vjoy monitor and u will see. And what is your OS? WIN11 right? Same problem here on WIN11 and I can't seem to find a solution. Maybe, just maybe, turning HPET off will help.

I have the same issue. I hope it can be solved soon.

I have not used rust with these displays but have had success with Arduino IDE, CubeIDE, and ESP-IDF. For arduino IDE, TFT-eSPI is 100% the way to go. This tutorial includes a basic TFTLCD setup with TFT-eSPI library.

For any further setups, LVGL is a great option. I'm unsure with rust compatibility, but for me, FreeRTOS is usually the way to go anyway.

Best, Justin

Here is something i made for this exact purpose.

https://treetofolders.netlify.app/

have you solved this problem? The 4090 graphics card I'm using now has an acacia problem with you. The training at a certain node will be interrupted, and then segment fault will be reported.

Chingón, en mi caso si era el SELINUX. Lo deshabilite y funcionó.

Gracias

Thanks a lot .. your responds inspired me to find a solution for my onEdit()