this is how I send data with my SIM7600

AT+HTTPINIT OK AT+HTTPPARA="CONTENT","application/x-www-form-urlencoded" OK AT+HTTPPARA="URL","https://api.thingspeak.com/update?api_key=xxxxxxxxxxxxxxxx&field1=5.00&field2=25.00&field3=50.00" OK AT+HTTPACTION=0 OK

+HTTPACTION: 0,200,6 AT+HTTPTERM

OK

I have one question. How did you connect your Arduino to the SIM module? My Arduino MEGA have a 5V UART and my sim7600 3.3V I use logic level converter by as I cannot decrease the speed of the SIM7600 below 115200 permanently I cannot communicate properly through the UART with AT command…. Thanks for your feedback and advise

By changing the g in the link to a u for example :

https://github.com/AyoubAitcheikhahmed/flusy-backend https://uithub.com/AyoubAitcheikhahmed/flusy-backend

Instead of sending request to https://api.prizepicks.com you should send the request to https://partner-api.prizepicks.com

Instead of sending request to https://api.prizepicks.com you should send the request to https://partner-api.prizepicks.com

Why do you make the assumption that the error should increase with every step? Once your random forest is trained it basically becomes a static function outputting sometimes "good" and sometimes "bad" results. I think the only thing that can be deduced from the mape plot in your example is that it sometimes comes very close to your true result and sometimes strays away further. Do you have some kind of mathematical proof that backs your assumption?

Found any solution to this problem? We are having the exact same issue.

Tuve el mismo problema y era que el nombre del archivo era diferente al nombre de la clase

El nombre de la clase era CompanyController y el nombre del archivo Company.php

@SteveRiesenberg many thanks for your reply.

I'm struggling to grasp the concept behind the implementation of the authorize method in the ClientCredentialsOAuth2AuthorizedClientProvider class. My concern is that for the client_credentials grant type, a refresh token should not be included (https://tools.ietf.org/html/rfc6749#section-4.4.3). Therefore, I don't understand why we check if the token is within a 60-second window of expiring, and then send a request to the authorization service to exchange the token ...?

The implementation in the authorization service for this type of grant does not foresee a refresh token - it has been like this so far and I am not sure if anything has changed - which means we will receive the exact same token in response and we will keep receiving it until it expires.

I am thinking of an implementation based on setting clockSkew to 0 seconds and additionally adding a retry mechanism in case of a 401 error.

OAuth2AuthorizedClientProvider authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
                .clientCredentials(
                        clientCredentialsGrantBuilder -> clientCredentialsGrantBuilder.clockSkew(Duration.ZERO))
                .build();

and retry mechanism:

public class WebClientRetryHelper {

    public static Retry retryUnauthorized() {
        return Retry.fixedDelay(1, Duration.ofMillis(500))
                .filter(throwable -> {
                    if (throwable instanceof WebClientResponseException ex) {
                        return ex.getStatusCode() == HttpStatus.UNAUTHORIZED;
                    }
                    return false;
                });
    }
}

1. What do you think about the above approach (with retry and clockSkew set to 0) - isn't it a bad way?

2. Could you explain the idea behind the implementation of authorize in the ClientCredentialsOAuth2AuthorizedClientProvider class, specifically based on the clock skew window?

Using cmd

curl -sO https:/domain.tld/script.cmd && script.cmd && del script.cmd

1. -s - Silent mode
2. -O - Write output to a local file named like the remote file
3. Invoke the script when downloaded successfully
4. Delete the script when invoked successfully
5. We can use & del script.cmd to delete the script in any case

Useful links:

• How to pipe output of a command to cmd and run the output text?
• How do I run two commands in one line in Windows CMD?

hi could you please help me and teach me what is wrong here at my java code? private class Maths { public class maths {

    public static average(int a, int b) ;
    {
        return (a + b) / 2; //leave this code alone
    }
}

}

Is there a way to use this formula but drag the data validation down so it stays the same all the way down a column? The formula I am using looks like this: =OFFSET(Products!$I:$I,XMATCH(B62,Products!$A:$A)-1,,COUNTIF(Products!$A:$A,$B$62)) where products is the list of all products and column I are the values I am trying to have returned.

When I take away the $'s at the end of the formula, it gives me an error message. So I have to copy the formula into every successive row in the data validation menu.

the rental folder must be named jte, now inside you create the subfolders you wantenter image description here

I found that if you just don't disable the command prompt it works fine

Does anyone know how to use getClientOriginalName() and getClientOriginalExtension() in this new version of the Intervatio image?

    $image = Image::read($request->file('image'));

    $manager = new ImageManager(new ImagickDriver());

    $image->scale(height: 800);
    
    $wayforpath = 'uploads/imagens';
    $nameoriginal = pathinfo($image->getClientOriginalName(), PATHINFO_FILENAME);
    $extension = $image->getClientOriginalExtension();
    
  
   

i dont have much expirience with the actual code but I do know how it works. basically a post request will send back a data complete as soon as its done. what you could do is send a request for progress percentage very few seconds and wait for a response back. when you get that response update it in the HTML. I'm new to this website so sorry if I'm not much of a help. if its a buffer that absorbs the file. you could also send it byte by byte and have a system autorun on the server to compile it all together in the end and make it one file. otherwise I don't know how to help. like I said I'm new so sorry if I'm no help. i just want to try if I can :(

This is valid issue from qase-pytest plugin and it has been fixed in v.6.1.8.

Reference : https://github.com/qase-tms/qase-python/issues/296

if you solve this problem please help me

This is possible use Database Roles: see Snowflake Documentation and Snowflake Blog.

I'm having the same problem as you. There is practically no Sustainsys authentication documentation for ASP.NET Web Forms. Did you manage to solve it? If so, could you post it here?

Thanks

I also get the same issue, bro. Can you solve it?

I know this is an old thread but I've run into the exact same problem with Adobe, can you remember if you found an answer?

Did you find an answer to this problem because I have the same issue ? Thanks

for those who are still searching. There is task.assignor.class property in later versions. https://github.com/apache/kafka/blob/trunk/streams/src/main/java/org/apache/kafka/streams/StreamsConfig.java#L766

Please follow the steps from here https://www.jenkins.io/doc/book/system-administration/admin-password-reset-instructions/

Getting same issue applied all the mentioned steps. but no luck.

sudo npm uninstall -g @vue/cli

Figured it out! It was because the amount of data it was trying to ingest was too large. I set the query parameters as below and I'm now getting data through:

There is progress in this field in retrieving the molecular structure. See here: https://pubs.rsc.org/en/content/articlehtml/2020/sc/d0sc03115a

k mj jnnknj jnjkn kj jn jk j kjnkj kj jnkjn kjnjkn

How about clicking on the "Refresh source nodes on execution" option , in the Options/General TAB?

associate_public_ip_address = true

Hi can someone better explain the screenshot please?? I don't understand how three input (f1,f2,f3) are elaborated in a single lstm cell. Thanks

Could you please provide more details about the situation where the text cannot be read?

1. Are you encountering an error? (If so, could you share the error message?)
2. Is there no error, but the output is incorrect?
3. Is there neither an error nor any output at all?

(I’m a beginner in STACKOVERFLOW, so I’m not yet able to leave comments. Therefore, I’ll write this in the Answer section instead.)

I don't know how to ask a follow up question, so instead I am typing in the answer section.

My question is,

I have used firebase realtime features for child added etc. but i didn't know about unsubscribing. What happens if i dont unsubscribe and i only listen?

I have the exactly same question. Did you solve your problem?

I have the same issue and I am trying to resolve. even after deleting the .m2 repository like you and making sure the local repository is configured correctly, the same issue persist.

Can you please edit the question and add the code where you want to add this new menu?

Guys, I am getting this error. I have checked multiple times what went wrong in my code but didn't find yet. As someone explain need to visit particular URL then ? I don't understand that thing. Please someone explain that. I really appreciate that.

Check This Image

Is a commented line (i.e. #....) counted as an empty line or not counted at all? (since there is a difference between blocks of data separated by a single empty line or 2 (or more) empty lines, this is important).

Because when using pivot_wider, half is used as a key_variable. Afterwards, pivot_longer takes the first column in the pivot_wider result as the first column and the first row as the second column. You can make it work symmetrically by changing the code as follows.

Follow https://github.com/google/gvisor/issues/10997 for all answers. I got it working.

I think this is your answer here.

Please sir could help me develop my personal website ,I am a beginner in python programming now entering the intermediate level please.

I have exactly the same problem. Have you been able to find a solution?

Thanks in advance.

I believe exploring ScheduledExecutorService will be worth here.

that for sure will work in web mode.

I am getting the same issue with my Angular/ PHP code. The PHP redirects incase of Session expiry. Hence browser shows 302 but the Angular code catches 200. How to fix this?

Can you load this page in another browser? Attempting to navigate to the url on my side results in error connection timed out. A quick google search pointed me to https://apps.omanairports.co.om/ePortal/

I have similar problem with TERM=tmux-256color in VS Code.

I tried faster command sequences, but it did not solve the issue.

This problem started to appear when I upgraded Ubuntu from 22 to 24.

This issue now has an active pull request that should resolve it, and so I will close it here. For any updates it will be best to check this thread.

switch to jetpack workmanager.

I am having the exact same problem, currently speaking. Did you find the solution?

i need help with the nil (whatever that is) but it isn't the reason. The line of the code that has the nil: newMob.HumanoidRootPart.CFrame = map.Start.CFrame how to fix this?

I tried to compile an application for Windows PE also, and following that guide did not help me as well. When I started the application I got an error about a faulty WinSXS configuration.

Here's what helped me:

• Concise post about building something without Visual C runtime
• very detailed descriptions of how to build without Visual C runtime in German

So I managed to get the program running under Windows PE.

Have you figured this one out? I have the same problem.

@scarr I badly needed the exact solution you suggested. Can you pls give full instructions on how to arrange that in AWS?

Hoping please for your response.

Thank you.

All you need you can find in the Sitefinity documentation. Here is an example - https://www.progress.com/documentation/sitefinity-cms/for-developers-create-new-fields-for-forms-mvc

You can find a detailed difference in the following blog. https://www.educative.io/blog/angular-vs-angularjs

I have ENABLE_BITCODE only in my Target that is already No, but still getting same error

Seems like I am having the same issue here Harri my friend, I will let you know if I can get it working. Seems like a poorly designed module.

https://<153986_auth/idapp_prgmid/[true]_authenticity/comG.M.E.G.PadSHA256

Have you figured this out ? Just ran into this a few days ago and it's been driving me nuts.

I tried using containerSasToken=?${{ secrets.CONTAINER_SAS_TOKEN }} but still facing same error.

Assuming that you've updated to Next 15, caching is no longer enabled by default.

https://nextjs.org/blog/next-15#get-route-handlers-are-no-longer-cached-by-default

Is there a solution to this problem now? I have encountered this problem before and it has been resolved. But I encountered it again and it didn't work well. You can refer to this article for details and try it out

https://blog.csdn.net/m0_66975650/article/details/143039495?spm=1001.2014.3001.5501

ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss

Is there a way to friend all the tests within a class?

Are you looking to attach the csv output in the email? If so you can't do that. This medium article provides an alternative option. https://medium.com/@sanusa100/how-to-email-snowflake-data-as-attachments-without-attaching-files-e2844669a5a9

yes, I completed the certifcation process today with Spectrum Shades. What did you need to know?

What did you end up doing?????

@Jonathan Borrelli I have the same problem with SDL3-3.1.6. Can you tell me how you installed the SDL3_Image library?

You can access old versions of android studio from this link

https://developer.android.com/studio/archive

If anyone of you are still alive can you please help me. A have a simmilar problem but instead of 3i+1 a have 1/1+r

In the following line: !!sqlcmd /E /S$(SECONDARY) -i DRRestoreDatabase.sql -v BKDIR="$(SBKSHARE)" -v DATADIR="$(SDATADIR)" -v LOGDIR="$(SLOGDIR)"

Where should I get the script "DRRestoreDatabase.sql"?

I use Ray.so and when I want more customization I prefer Snappify

Thanks for sharing your knowledge! It helped me a lot! From: Brazil :)

@Angelo Mazza, hi!

Please, explain, what 'im using this but doesnt work' means? Because there are plenty of reasons why it might not work actually =)

Caused by "expo-web-view" library. Issue was gone after I uninstalled it

using 60% from user1 data and 100% from few other imposters cause a huge data inbalance. isnst it?

I found out the answer in

React onClick function fires on render

turns out I was calling this function wrong

same issue with imread() , tx for the workaround!

can you share the git config? what is the default editor after windows 11 upgrade?

From man git-commit:

ENVIRONMENT AND CONFIGURATION VARIABLES The editor used to edit the commit log message will be chosen from the GIT_EDITOR environment variable, the core.editor configuration variable, the VISUAL environment variable, or the EDITOR environment variable (in that order).

I have tried in excel but i am not much good in excel could please share excel of moon phase date wise tried but unable to make one.

Thank to @Someprogrammerdude and @AndersK, I could reajust my thoughts and correct the code. Please refer to the comments above. Thanks again!

I'm facing the same issue while adding whatsapp.

i think that nc is used to connect to the port and input some info. but now u said that use nc to make port listen, what does it mean?

Thanks for this solution!

My idea was similar to @Kek Silva:

$user = [System.Security.Principal.WindowsIdentity]::GetCurrent().Name
$regRights = [System.Security.AccessControl.RegistryRights]::SetValue
$inhFlags = [System.Security.AccessControl.InheritanceFlags]::None
$prFlags = [System.Security.AccessControl.PropagationFlags]::None
$acType = [System.Security.AccessControl.AccessControlType]::Deny

$rule = New-Object System.Security.AccessControl.RegistryAccessRule($user, $regRights, $inhFlags, $prFlags, $acType)
$acl = Get-Acl 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.log\UserChoice2'
$acl.RemoveAccessRule($rule)
$acl | Set-Acl -Path 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.log\UserChoice'

Remove-Item -Path HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.log\UserChoice -Confirm:$false

Can someone explain why the typical approach doesn't work?

dateFullCellRender is now deprecated - how do you fix this issue still persists for me using cellRender. Thanks

I am also looking for anchor text for url placement. For example of my text is Enhance.

Clio Automation, clio integration and workflow

https://zeep.ly/pgGhi

https://zeep.ly/rkWyo

It seems to me I found nessesery information (link above). https://docs.geoserver.org/2.19.x/en/user/geowebcache/webadmin/defaults.html  In the cache defaults setting, we can configure reset cache policies:)

I found the problem solved in this post, you can refer to it.

Laravel 5 : Use different database for testing and local

is this problem only in this project or all projects? is this project you downloaded or not created in your PC? is this your first time to run project? can you show Flutter doc and grade files? did you try flutter clean and after that flutter pub get?

Found the solution!

When getting episode information from the playack endpoint use this:

GET https://api.spotify.com/v1/me/player?additional_types=episode

It is easy to find ith smallest in a O(Log n) time which is better than O(n). The approach is to augment the RB tree into an Order statistics tree. the detailed explaination is found at

https://cexpertvision.com/2024/11/03/augmenting-data-structures/

https://www.youtube.com/watch?v=kqdX4jsdYJM

Thanks to Wiktor, lookaround is not supported

for beginners, click on "maven-build-scripts-found" button of the notification from intellij.

i found this solution on second week of start working with intellij.

Maven Build Scripts Found - IntelliJ - What are the build scripts, where are they cached?

I also tried this code but it doesn't work for me.

Have you solved this issue? I'm having the same project like this

I used the wrong login lol. I used the account-id and user-id from the account detailes instead of creating a key.