I found a way to do what I wanted.

It's not pretty. But what I did in then end was writing a Spring Security WebFilter that uses a RouteDefinitionLocator to get the configured routes. And get's the matching RouteDefinition from those.

On the route, I added a metadata entry, containing the client registration name. Which I write to a session attribute in the WebFilter.

Then I have a RestController which is redirected to for AuthenticationEntryPoint. In the Controller, I redirect to the authorization endpoint according to the client registration session attribute.

I'll post the code at a later point, as I'm on sick leave right now.

Like suggested I added the following Button_Click event to the UserControl1.xaml and it is working like intended:

private void Button_Click(object sender, RoutedEventArgs e)
{
    ParentInProgress = true;
    Testclass.DoSomethingCommand.Execute(true);
}

You can use the reloaded version

pip install zipline-reloaded

I used it and it works

See more in this here https://pypi.org/project/zipline-reloaded/

I am also trying to fine-tune layoutlmv3 with chunking method and strugggling at the postprocessing part. I was wondering if you able to solve this problem?

same issue =>

=IF(SEARCH("[C1]";D40;1);XLOOKUP("[C1]";Sheet3!A:A;Sheet3!B:B;;2);IF(SEARCH("[TFS]";D40;1);XLOOKUP("[TFS]";Sheet3!A:A;Sheet3!B:B;;2)))

the values on C1 are ok. the values on TFS return #VALUE!

the mapping I am using in excel is: enter image description here

Nothing worked for me so my solution was to clear all code of the class I couldn't find and then perform a flutter clean => flutter pub get , which will result in making a syntax error to every location that used that class, then I would just simply re-import it.

My problem was that the folder name started in CAPS LOCK and the actual name was not, so I guess the IDE got confused.

I have the same issue but the answers given are not resolving this, should I recreate the exact same post ?

I find an anwser https://gist.github.com/widnyana/e0cb041854b6e0c9e0d823b37994d343. It saves my life.

You can fix this by executing this before your command: export DISPLAY=:0.0

It sets an environment variable tells your SSH session that you want to target the X server on the host.

i think its not the number of rows thats affecting the speed, but its the query behind the loading. can you do a check of which queries get executed so you can trace where the most wait happens?

change your cadvisor to gcr.io/cadvisor/cadvisor

if you want a specific version, then you can add tag like gcr.io/cadvisor/cadvisor:v0.46.0

REPLACE(REPLACE(REPLACE(ClientNotes, CHAR(9), ''), CHAR(10), ''), CHAR(13), '')

The actual output is :

REG_SZ C:\Program Files\Microsoft Office\Root\Office16\EXCEL.EXE

And i would need it to be :

C:\Program Files\Microsoft Office\Root\Office16\EXCEL.EXE

What you are looking for is Conditional highlighting

You might also learn more about conditional highlighting from How to use Conditional Highlighting and Sums with FastReport video.

In my case I had [ApiExplorerSettings] attribute on Controller. After removing it Swagger begun to display API.

I came accross a similar problem my data set was an array of objects called offers, inside which another array called metaData was present.

data Set Example :

offers : [{
Country : 1,
Status:1,
OfferCode :"TEST",
EndUtc : 1234455,
metaData :[{name : "isNewUSer",message :"yes"},
{name : "cohort",message :"bro please"}]
}]

I wanted to fetch all the offers whose metaData had isNewUSer atleast once. Here is the sample query for this requirement.

    for o in offers 
let a = o.metaData 
let c = (for m in a filter m.name == 'IsNewUser' return a)
filter LENGTH(c) > 0 and o.Country == "14" and o.Status ==1
return o.OfferCode

This will return all the offercodes which has isnewuser in its metaData. Thanks.

I was in contact with Swish support the other day (2024-10-28) and this is what they wrote:

We are working on a change that will solve this issue with Azure but are not quite finished with it. We have also received indications from other merchants that by changing "payment plan" in Azure they have been able to make it work again with calls toward Swish API's. Unfortunately we do not have any insight into how exactly this is done.

So I guess they are still working on a fix for this issue..

I think problem is in SRARK configuration. Add, pls, PYSPARK_PYTHON environment variable in your ~/.bashrc. In my case, it looks like : export PYSPARK_PYTHON =/home/comrade/environments/spark/bin/python3, where PYSPARK_PYTHON is path to my python executable in "spark" environment.1

Hope, it helps)

It seems like in iOS 18.1, they fixed the issue: https://developer.apple.com/documentation/ios-ipados-release-notes/ios-ipados-18_1-release-notes

This was a problem in questdb-connect version 1.1.2 and older versions. questdb-connect 1.1.3 now supports the VARCHAR type, so workarounds are no longer needed.

Thank you, Deleting the .snap file from location .metadata/.plugins/org.eclipse.core.resources/ helps for me :) Eclipse opens again after failure:

!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes. !ENTRY org.eclipse.osgi 4 0 2024-11-05 09:16:53.719 !MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (166). !STACK 0 org.osgi.framework.BundleException: Exception in org.eclipse.core.resources.ResourcesPlugin.start() of bundle org.eclipse.core.resources.

"Insert into users(student_id,student_name,division,stream,email,mobile_number,city,state,address)values(1,'sejal','A','science','[email protected]',7710806152,'thane','maharashtra','luiswadi'),(2,'lucky','B','science','[email protected]',9670240625,'thane','maharashtra','luiswadi')";

For Hetzner, this is one possibility: https://vadosware.io/post/sometimes-the-problem-is-dns-on-hetzner/

Thank you, I have been trying to find an answer to this for the last 4 hours scanning every page I can. I have tried about 10 different solutions. The problem is most of them are old. My solution does not need webdriver as it is built into Chrome now. Here is my code for reference for those looking for answers.

from selenium import webdriver
from selenium.webdriver.chrome.options import Options
options = webdriver.ChromeOptions()
options.add_argument("user-data-dir=C:\\Users\\<user>\\AppData\\Local\\Google\\Chrome\\User Data")
options.add_argument("--profile-directory=Default")
options.add_argument('--disable-gpu')
options.add_argument("--no-sandbox")
myurl  = 'https://finance.yahoo.com/portfolio/p_4/view/view_6'
driver.get(myurl)

Just change this line in your code..

class DogOwner extends Owner { @override final Dog pet = Dog(); // you need specify Dog type or you can add var }

Maybe RedisShake - Scan Reader can help you, but RedisShake is not designed to run indefinitely.

As of Rust 1.82.0, we have Option::is_none_or for this exact scenario:

foo.is_none_or(|foo_val| foo_val < 5)

I've noticed that too; maybe try Refact.ai as an alternative for more dynamic code generation in your IDE. I've been usin this for over a month or so

Seems, that example of not Cyclic Module Record is Synthetic Module Record for json and css files.

So we can find here concrete method Link(), that will invoked in that example:

1. If module is not a Cyclic Module Record, then
   a. Perform ? module.Link(). /// here
   b. Return index.

Turn out it is the user permission issue. Files in /var/lib/mysql is owned by user 999, and id $(whami) shows the current user is mysql(1001).

To fix this issue I add -u option to the docker run to run bash as user 999:

docker compose run -u 999 mysql_backup bash

The config part has an extra comma, please remove it. "org.apache.sedona:sedona-spark-3.0_2.12:1.6.1," "org.datasyslab:geotools-wrapper:1.6.1-28.2",

datasets: [
  {
    label: "Diffraction",
    borderColor: "#f87979",
    backgroundColor: "#f87979",
    showLine: true, // Enable lines between points
    data: [...]
  }
]

Does the problem happens after you reload/reopen VS Code? Maybe (most probably) it is trying to SYNC your extensions with your Github account. Can you check for if the SYNC is turned on on your VS Code?

On August 13, 2024, ytdl-core was officially depreciated by its maintainers. The recommendation is that you move to another package, such as @distube/ytdl-core, which works for most cases.

c2 = sp.exp(sp.I * sp.log(5))
2_standard = sp.cos(sp.log(5)) + sp.I * sp.sin(sp.log(5))

You have to tell sympy explicitly what to evaluate. expand(complex=true) doesn't automatically recognize non exponential forms as complex exponentials

Set up a shared JBOSS server on a separate machine by running it with a specific IP (./run.sh -b [IP_ADDRESS]) so all developers can deploy and test code remotely. This reduces local desktop load and avoids deployment conflicts. Alternatively, consider a CI tool like Jenkins to automate builds and testing.

use cacheExtent parameter of listview,that helped me in my scenario.you can add counts as per your data available.

did you initialize the client with the current parameters? make sure you upload only a specific code portion where the error occurs instead of copying and pasting the full code. try

const { Pool } = require('pg');

const pool = new Pool({
    user: process.env.DB_USER,
    host: process.env.DB_HOST,
    database: process.env.DB_NAME,
    password: process.env.DB_PASSWORD,
    port: process.env.DB_PORT || 5432
});

pool.connect((err, client, release) => {
    if (err) {
        console.error('Error connecting to the database:', err.stack);
    } else {
        console.log('Successfully connected to database');
    }
});

before registering a new user, try checking if it already exists and sanitize the inputs first.

In your android/app/build.gradle add coreLibraryDesugaring inside dependencies:

dependencies {
    // Add this [coreLibraryDesugaring] inside [dependencies]
    coreLibraryDesugaring 'com.android.tools:desugar_jdk_libs:2.0.4'
}

This will enable core library desugaring.

Is this what you want?

def extract_routes_for_model(model_name)
  Rails.application.routes.routes.map do |route|
    verb = route.verb.match(/[A-Z]+/).to_s
    path = route.path.spec.to_s
    controller_action = route.defaults[:controller]
    action = route.defaults[:action]
    helper = Rails.application.routes.url_helpers.method_defined?("#{route.name}_path") ? "#{route.name}_path" : nil

    if controller_action&.include?(model_name.underscore.pluralize)
      {
        method: verb,
        path: path,
        helper: helper,
        action: action
      }
    end
  end.compact
end

Use: extract_routes_for_model("Post")

The output will be an array of hashes containing information for each corresponding path.

You need to add sepolicy rules for your service for sure!

Check out similar example: Run shell script at boot in AOSP

It work in my case :

    css: {
        preprocessorOptions: {
            sass: {
                api: 'modern-compiler',
            },
        },
    },

From the source code, we can see that nuxt-ui only supports one modal. You can only realize one by yourself. I also have this trouble.

source-code-image

i have the same issue, but there is a difference with my case. I have two elements, and the second element is a child of the first(it's because of menu hierarchy). Elements based on ol>li and div blocks. Second element drops down on hover. Both of elements have backdrop-filter and it works well for first, but when hover event fires and the second element drops down, it takes only background property, backdrop-filter doesn't work(i can see backdrop-filter property in the devtools and its not crossed out). I just stuck, i very appreciate for any advice with it.

Can you give some error hints, if there are no error hints you may need to turn on errors in php.ini, and then use some code blocks like try-catch in the PHP code to catch the specific errors

bitte antwort.........................................................

I have resolved this things from alibaba's document here is link please check it. https://www.alibabacloud.com/help/en/ecs/processing-of-kdevtmpfsi-mining-virus-implanted-in-linux-instances#:~:text=Run%20the%20top%20command%20to,to%20check%20the%20scheduled%20task.

1. you need to increase the Duration in the Future.delay and then try!!
2. I think the problem is the time not lottie asset.
3. The animation needs time to execute..

You can insert multiple rows into a table after ensuring that the table is empty by

INSERT INTO Persons
SELECT personID, personName
FROM (
  SELECT 1 as personID, "Jhon" as personName
  UNION ALL
  SELECT 2 as personID, "Steve" as personName
)
WHERE NOT EXISTS (SELECT 1 from Persons);

Where the "UNION ALL" statement is used to combine the result sets of two or more "SELECT" statement

Note: Forpas wrote the solution core here but I edited the syntax to insert multiple rows instead of one

You can use the basePath config option:

// File: next.config.js

module.exports = {
  basePath: '/resources',
}

https://nextjs.org/docs/app/api-reference/next-config-js/basePath

Python's pedantic attitude to spaces and tabs is frustrating and totally unwarranted. I had to rewrite 100 lines of code because python bitched about a syntax error that NOBODY could find. Astonishing.

Can you please provide this part of your code Because here in example we use 'EST' in dataframe and see the same on the graph

from datetime import datetime, timedelta

import pytz
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt

pd.set_option("display.max_columns", None)
pd.set_option("display.width", None)

def create_sample_data():
    est = pytz.timezone('EST')
    start_date = est.localize(datetime(2024, 1, 1, 9, 0, 0))
    dates = [start_date + timedelta(hours=i) for i in range(100)]

    data = pd.DataFrame({
        "Datetime": dates,
        'Open': np.random.randn(100).cumsum() + 100,
        'High': np.random.randn(100).cumsum() + 102,
        'Low': np.random.randn(100).cumsum() + 98,
        'Close': np.random.randn(100).cumsum() + 100,
        'Volume': np.random.randint(1000, 10000, 100)

    })

    data.set_index('Datetime', inplace=True)

    return data


if __name__ == '__main__':
    df = create_sample_data()
    print(df.head())
    df["Open"].plot()
    plt.show()

                                 Open        High        Low       Close  Volume
Datetime                                                                        
2024-01-01 09:00:00-05:00  100.112783  102.718745  97.327823  100.718963    4473
2024-01-01 10:00:00-05:00  101.082608  104.173274  96.920105  101.971678    8605
2024-01-01 11:00:00-05:00  103.168035  105.240899  95.465495  103.051083    9213
2024-01-01 12:00:00-05:00  103.517523  104.591967  95.903017  101.958344    7818
2024-01-01 13:00:00-05:00  102.138308  105.277195  96.024361  100.904891    1400

The code directly or indirectly references the content of dynamic modality, resulting in abnormal parsing. The service cannot be registered. Solve it by decoupling through publishing and subscribing with @nestjs/event-emitter.

I was stuck for months on this trying to write the RootCA onto "3" which is the second system on simcom 7080G flash memory. Now I have an issue of convert file to the system. That's why I came here to seek for solution. Thanks for all comments above. I would like to share if this would help. I don't think merely using AT+CFSWFILE=3 can upload the RootCA to "customers" directory. I have just found a few days ago that it may need to configure the simcom 7080G before connect to the MCU (more easy) by using either USB. Before doing, I think it is a good idea to set internal clock to current because the default in simcom7080 is back to 1980 which all RootCA expires already. After AT+CFSWFILE=3 with correct parameters then you can see response from the simcom7080G with "download". You have to open the RootCA file, copy the content of file ready to paste into the terminal click send within the time limit. In your command is 500 millisecond which is too short, you can set max at 10000 ms (10 s). The file will upload with response OK. The file prepare you need to check the size exactly in byte using with line feed or carriage return or any special characters are not allowed. To make sure I use Notepad++. On the bottom right corner, right click the format to unix(LF) and UTF-8 only. After doing this you can use AT+CFSRFILE to read the file that uploaded to "3" or "customers" directory. I am struggling right after this to convert the file in to the simcom 7080G system. Any comment is welcome.

Screenshot of Xcode

This issue is caused because the script to start the flutter engine is not running properly.

Try turning off the "For install builds only" checkbox in the Run Script section and the Thin Binary section of the Build Phases tab in Target Runner.

Try using remember instead of mutableState like this:

val pagerState = rememberPagerState(pageCount = { itemCount })

This should solve your problem. Thanks.

I got this error and tried all your solutions but can't solve it.

Error while loading conda entry point: conda-libmamba-solver (libarchive.so.20: cannot open shared object file: No such file or directory)

Is token refresh not taken care of internally? Is there anything extra we need to do here?

As per documentation

The DefaultAzureCredential class caches the token in memory and retrieves it from Microsoft Entra ID just before expiration. You don't need any custom code to refresh the token.

This is but present in System.Data.SqlClient (on .NET Framework) where, in certain scenarios, when a token expires for a connection in a connection pool, SqlClient can fail to discard the connection and refresh the token

Use Microsoft.Data.SqlClient this client often handles token expiration and Managed Identity better, with improved support for AAD token refresh. To resolve the issue in your code, add this NuGet package:

Install-Package Microsoft.Data.SqlClient -Version 5.1.0

After installing, update your code to use Microsoft.Data.SqlClient

please check this document for more information.

So, i analyzed my code, and despite on another Prompt was absent, i had found such code

this.props.history.block(this.callback);

Deleting of this line fixed the warning. So i need to review Prompt and this.props.history.block usage at the same time.

Problem is that within a foreach when you're at item() level, you're comparing the value with body/value which is an object. It will certainly 'not contain' the ID you're passing and will always generate a new record.

here an approaches to do this.

Get all IDs in the excel with a select and then check for the ones that dont exist. then add them.

As you see, the condition is now false. Ensure that the datatype of your ID is string (parse it using string() function if not) since select always returns an array of strings.

Better approach

an even better approach to avoid repetitive conditions in the foreach loop is by using a filter array to get all items that don't exist and then create them in the loop.

here's a sample structure using filter array

only six out of 20 were added

At eWebWorld, we recommend several cross-platform mobile app development tools that are suitable for Linux and were popular in 2015. Here are some of the best options:

React Native: Developed by Facebook, React Native enables the creation of mobile applications using JavaScript and React. It provides a rich set of components and can easily integrate with AdMob and various push notification services.

Flutter: Google's Flutter has gained popularity for its ability to build natively compiled applications for mobile, web, and desktop from a single codebase. Its rich widget library makes it easy to implement AdMob and push notifications.

PhoneGap: While you mentioned trying Cordova, it's worth noting that PhoneGap (which is built on Cordova) can also be an option for creating hybrid apps. It allows for the integration of AdMob and push notifications through plugins.

Ionic: Ionic is another framework that builds hybrid mobile apps using web technologies. It supports integration with AdMob and push notifications, making it a versatile option for developers looking to work on Linux.

These tools provide flexibility and extensive support for integrating monetization and notification services, making them great choices for cross-platform development on Linux.

I think it would be more elegant to use list comprehension here, for example:

my_list=["apple","banana","orange"]
my_list=[l.upper() if l == "banana" else l for l in my_list]

To address your question, you can make the following changes in the code:

1. Assign your extracted values in one variable

ans = df.iloc[:,0].str.extract(r'^(.?)\s(\d.?\d*)?$') # '\d+.\d+'

2. Access only first index only

ans[1]

Please refer to the image below for additional clarification.

https://i.sstatic.net/Qs9JGpfn.png

just simple, shutting down your emulator then start again with cold boot. it's worked. 2024

Found a workaround, it seems that all the metal files in the target will be built into a normal .metallib library. But adding the -fcikernel makes it build for CIKernel. I end up building one of the .metallib using command line.

xcrun -sdk iphoneos metal -c -mios-version-min=15.0 blur.metal -o blur.air

xcrun -sdk iphoneos metallib blur.air -o blur.metallib

Then add the output file to the target.

let library = ShaderLibrary(url: Bundle.main.url(forResource: "blur", withExtension: "metallib")!)

The drawback is you have to manually build it when you update the metal file and it can not work on simulator. Guess the better way to do it is separate two different metal source file into frameworks?

The correct way of adding Environment Variable would be to:

1. Locate the "Path" Variable in the "System variables".
2. Select it.
3. Edit the variable.
4. Upon clicking the edit option, you will see many paths.
5. Click the new option on the dialogue's right sidebar.
6. Add your path and then your path will be added.

str_contains(url()->current(), 'faq') ? 'active' : ''

The Str::contains method determines if the given string contains the given value.

You need to generate a Bicep supporter that generates a connections dynamically across environments.

Here's a demonstration about using it. Integrating API Connections into Standard Logic Apps with Bicep Scripts

May you have tried to set BAZELISK_HOME to a path that suits your needs, like the repo root? Be aware also the downloads during the setup of bazel will be placed there.

This can be achieved by using a .bazeliskrc file in the root of your repo

BAZELISK_HOME=./.repo_local_cache/bazelisk

How is the use of publish in the Publish_Specs class in the MassTransit.KafkaIntegration.Tests project? We noticed that the publish method does not send to the topic as you say , how does the consumer read it message? Can we understand the logic? thanks

class KafkaMessageConsumer :
     IConsumer<KafkaMessage>
 {
     readonly IPublishEndpoint _publishEndpoint;
     readonly TaskCompletionSource<ConsumeContext<KafkaMessage>> _taskCompletionSource;

     public KafkaMessageConsumer(IPublishEndpoint publishEndpoint, TaskCompletionSource<ConsumeContext<KafkaMessage>> taskCompletionSource)
     {
         _publishEndpoint = publishEndpoint;
         _taskCompletionSource = taskCompletionSource;
     }

     public async Task Consume(ConsumeContext<KafkaMessage> context)
     {
         _taskCompletionSource.TrySetResult(context);
         await _publishEndpoint.Publish<BusPing>(new { });
     }
 }

Remember to change the dropdown at the top! (yes, that was me!)

There is one inconsistency between @rtatton and @BizAVGreg. I am wondering whether the TXT record should be as follows:

mail.customdomain.com   TXT "v=spf1 include:amazonses.com ~all"

I faced this issue when connecting my Mongodb service with the Nestjs service (in the same k8s node). Remember to assign 27017 port to both port: and targetPort: in MondoDB's service.yaml. If you assign port:, to something else, it will not work.

In large projects, there are often more than one bin or object folder. So, you can use

**/bin/
**/obj/

to ignore all bin and object folders.

How to Ignore any 'bin' Directory on a Git Project?

I understood that problem and solved it by reading this link: https://www.luizkowalski.net/validating-mandrill-webhook-signatures-on-rails/

The issue was solved by replacing IBM semeru JDK with Oracle JDK

The regex you used doesn’t isolate numbers at the end of the string, which is why the results aren’t coming out right. Try using (\d+(\.\d+)?$) to extract decimal or integer numbers that appear at the end of the string.

from the output of gcloud alpha logging tail --log-http

You can see that, only a GRPC call is made. Thus this tail http API seems to be invalid, and only GRPC works.

Initializing tail session.
=======================
==== request start ====
method: /google.logging.v2.LoggingServiceV2/TailLogEntries
== headers start ==
authorization: --- Token Redacted ---

On the pipeline runner, git replaced the \r\n windows line ending with just \n and the parser is sensitive to this. It thinks the message is one long line and is thus not finding the PV1 segment as expected.

I just install dos2unix and convert the file that contains the HL7 Message. Here's the pipeline script.

# install dos2unix for converting unix to dos
  - task: CmdLine@2
    displayName: 'Install dos2unix'
    inputs:
      script: |
        echo installing dos2unix
        sudo apt-get update
        sudo apt-get install -y dos2unix

  - task: CmdLine@2
    displayName: 'Convert Files from Unix to DOS Format'
    inputs:
      script: |
        echo converting files from Unix to DOS format
        find **Integrations/**/*HL7.Parser.UnitTests -name '*.cs' -type f -exec unix2dos {} \;

Best way to do this is as follows:

df['col'] = df['col'].apply(pd.to_numeric,errors='coerce').astype(pd.Int32Dtype())

So it will first convert any invalid integer value to NaN first & then to NA

Improving onEdit Function

For better approach improving the function of onEdit.

Script modified

function onEdit(e) {
  const ss = SpreadsheetApp.getActiveSpreadsheet();
  var x = e.range.getA1Notation();
  SpreadsheetApp.getActiveSpreadsheet().toast(x);

    if(x == "A1:Z1000"){
    ss.moveActiveSheet(ss.getNumSheets());
    }
   }

This condition is for the testing of your post you will need to adjust depends on your dataset also if you edit on the cell the active sheet will not moved into the last row

if(x == "A1:Z1000"){
ss.moveActiveSheet(ss.getNumSheets());
}

on this part

let sheet = ss.getSheetByName("Sheet1").copyTo(ss).activate(); 

This line is not needed since it will be redundant with the manual duplication your doing on the spreadsheet.

Sample Output

Reference

• CopyTo

• getA1Notation

• IF Statement

When you call a function like this:

removeElementByIndex(4, origionalArray);

"origionalArray" is passed as an argument to the parameter "arr" in the function. This means that within the function, "arr" refers to the same array object as "origionalArray".

In JavaScript, arrays are passed by reference. This means that both "arr" and "origionalArray" point to the same memory location where the array data is stored.

Therefore, if you modify "arr" inside the function by doing this:

arr.splice(0, arr.length);

you are directly modifying "origionalArray".

If you were to do something like:

arr = [...tmpArr];

this line does not change "origionalArray"; instead, it reassigns "arr" to a new array created from "tmpArr". After this line, "arr" no longer points to "origionalArray"; it now points to a new array, so "origionalArray" is unaffected.

If you want "origionalArray" to be populated, do this:

const origionalArray = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9];

const removeElementByIndex = function(ind, arr) {
  let j = 0, tmpArr = [];
  for (let i=0; i<arr.length; i++) {
    if (i !== ind) {
      tmpArr[j] = arr[i];
      j++;
    };
  };
  
  arr.splice(0, arr.length);
  console.log(origionalArray, arr,  tmpArr);
  arr.push(...tmpArr);
  console.log(origionalArray, arr, tmpArr);
};

removeElementByIndex(4, origionalArray);

or this:

const origionalArray = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9];

const removeElementByIndex = function(ind, arr) {
  let j = 0, tmpArr = [];
  for (let i=0; i<arr.length; i++) {
    if (i !== ind) {
      tmpArr[j] = arr[i];
      j++;
    };
  };
  
  arr.splice(0, arr.length);
  console.log(origionalArray, arr,  tmpArr);
  for(let i=0; i<tmpArr.length; i++){
    arr.push(tmpArr[i]);
  }
  console.log(origionalArray, arr, tmpArr);
};

removeElementByIndex(4, origionalArray);

Guys! To learn more about arrays, please click the link below to watch me solve HackerRank's "Arrays - DS" online coding challenge with detailed explanations, on my YouTube channel.

I smashed HackerRank's "Arrays - DS" Online Coding Challenge!

The problem was somewhat simple and wierd, my react file had an import statements looking like these :-

import * as react from "react";

while the esbuild compiled the jsx to React.createElement(...), noticing that my imports declared 'react' with smallcase 'r' while the jsx was transpiled with React.createElement with uppercase 'R'.
Fixing my imports to have a uppercase 'R' fixed the issue. Looks like esbuild doesn't look at the react imports while transpiling jsx.

You could serve your API over different names : api-basic.myapp.com (that one does HTTP basic auth) api-oauth.myapp.com (that one for OAuth2) api-whatever.myapp.com (and the sky is the limit...)

You then point each type of client to the proper name.

These names can point to the same endpoint which will behave differently according to the name (ex: kubernetes ingress) or even point to different endpoints completely (an ingress on IP No 1 and a separate Nginx reverse proxy on IP No 2 for example).

You are getting error message in Eclipse because your Java library in not in project build path. You can configure is as following.

1. Right-click on project and then click on properties.

2. Click on Java Build Path.

3. Click on Libraries and then click on classpath.

4. Click on Add Library and then select your JDK.

5. Click on Apply and Close.

6. Clean and build the project from Project menu on the top of the Eclipse.

can you please guide us on how you achieved this , I am currently trying to deploy a unity app for UWP aswell. Any Documentation you can direct me to?

I am getting same problem when code is as per below:

e.name = this.getBedName(LocationPhysicalTypes.BED, bedNameOrder);

for this I resolved this issue by below code:

e = { ...e, name : this.getBedName(LocationPhysicalTypes.BED, bedNameOrder) };

And instead of forEach loop , I have used .map() function for that.

You can use ESlint to either throw out an error for the unused variables or give you warnings.

Check this example

Rule Details

Packages

I encountered the same problem and the reason was the older expiry date than today.

*answered the question cuz I don't have enough reputation to comment

Since the stack size per call is approximately 5 long variables, It appears that there will be a stack of about 5*8 and 40 bytes. I think the recursive call operates according to the number of inputs...

In that case, the stack is continuously created by 12345658. I think the stack will probably be maintained until all returns have been returned.

Then it is judged as if it exceeds 10MB.

You can set/update package structure from Build Path enter image description here

enter image description here

In java 8 and above you can use as follows:

 @JsonFormat(shape = JsonFormat.Shape.STRING, pattern = "dd-MM-yyyy")
private LocalDate month;

Font size change could happen because of the typo in your code. In CSS it seems you missed the "-". (.nav-item a)

.nav-item a {
    text-decoration: none;
    color: black;
    font-size: 18px;
}

! denotes not operation. lets say a[b] = 5 so a[b] will be true, putting a ! sign means the whole expression (!a[b]) is false. again if a[b] = 0 then a[b] will be false and (!a[b]) will be true.

Changes do only get effective into the model upon 'tab' (focusout). So this is after the DA on change. You can get the changed value from the columnitem though. Another option is to use the model change notification instead of DA.

Use this : flutter config --jdk-dir={YOUR-JAVA-17-HOME}

for me it is : flutter config --jdk-dir=/Library/Java/JavaVirtualMachines/zulu-17.jdk/Contents/Home

Note:

Removing the alias name in the update statement of the target table helped me.

Reference

Turns out that the DefaultAppPool was corrupt and thinking it was running a 32 bit app - created a new Integrated one, moved the MCV app over to that one and it ran.

So, I restarted the EC2 as well as removed the custom TCP ports (Since they are being served by nginx now). This worked for me.

Select the version you are using from the top right corner, and follow the Laravel documentation accordingly:

https://laravel.com/docs/11.x/middleware

You will find the right guidance in that document.