If you want to disable Kafka logs, you can configure your application.yml like that :

logging:
  level:
    org.apache.kafka: OFF
    kafka: OFF
    kafka.consumer: OFF
    kafka.producer: OFF

This config will turn off all Kafka related logs, including producer, consumer and every other Kafka components.

you might want to check up on GTK's Drawing widget

https://docs.gtk.org/gtk3/class.DrawingArea.html

I have seen other entities like PLplot, use this to create their own canvas class to draw widgets like graph or something essentially.

You might be able to replace the canvas in your old code with GtkDrawingArea.

You can use ActivityStateUpdates API. Checkout https://developer.apple.com/videos/play/wwdc2023/10184/ attime: 9.30 min.

As per this official Document :

If you get this error, do the following :

• Make sure you've enabled the Pub/Sub API in the Google Cloud console.

• Make sure that the principal making the request has the required permissions on the relevant Pub/Sub API resources, especially if you

  are using Pub/Sub API for cross-project communication.

• If you're using Dataflow, make sure that both {PROJECT_NUMBER}@cloudservices.gserviceaccount.com and the Compute

  Engine Service account

  {PROJECT_NUMBER}[email protected] have the

  required permissions on the relevant Pub/Sub API resource. For more

  information, see Dataflow Security and Permissions.

• If you're using App Engine, check your project's Permissions page to see if an App Engine Service Account is listed as a Pub/Sub Editor. If it is not, add your App Engine Service Account as a Pub/Sub Editor. Normally, the App Engine Service Account is of the form <project-id>@appspot.gserviceaccount.com.

Refer to this document for more information and go through this stack link which might be helpful for you.

Go to System Services

Go to Properties of "MySQL80"

Change the start-up type to Automatic

I hope this helps!

I rebuild the project and used the cast

as objcnames.protocols.MLKCompatibleImageProtocol

and it worked :)

still MLKVisionImage and GMLImage should yield conformative instances, but they don't.

got slower on Open() and SetPrinter() after moving away from local servers to the cloud. I used a 32 bit Delphi software for 5 years and noticed various delays for some user. Even the P-touch 5.4 are sloooow, to start 30 sec.

Locking for a solution.

For anyone still looking for an answer:

If anyone still looking same issue on 2024 and using Expo, you can just try Expo Crypto: https://docs.expo.dev/versions/latest/sdk/crypto/

const sha256Text = await Crypto.digestStringAsync(
Crypto.CryptoDigestAlgorithm.SHA256, 
'Example text');

const foo = [["a", "b", "c"], ["a", "b", "c"], ["a", "b", "c"],[['x','y','z']]];
const bar = foo.flat(Infinity)

console.log(bar)

Info: Array.Flat with parameter Infinity means flat it until no nested array exist.

Yes, what you can do is create a FreeStyle Grid, and within it, place the CustomerName and another nested FreeStyle Grid that contains the objects. And you can set the inner grid to be collapsed or not.

FreeStyle Grid Customer
   FreeStyle Grid Objects + -

you'll need this basically undocumented capture attribute added to your input's accept property

<input type="file" accept="image/*;capture=camera" />

https://gist.github.com/danawoodman/4788404bc620d5392d111dba98c73873

also, you have the option to create a custom-id via FF in firestore. Maybe it wasn't available at the time you wrote this question

You can dynamically grab the columns on your table using the INFORMATION_SCHEMA.

SELECT COLUMN_NAME from INFORMATION_SCHEMA.columns where TABLE_SCHEMA = "your_database" AND TABLE_NAME = "your_table"

I think you just have a typo in hangman_words.py where "word" in word_list is not plural, but in the other file is referred to as words_list.

I'm not sure why, but this is the fix:

You are using Spational Temporal Post Processing as an upscale filter. Change it to something else or increase the render scale to be more than 1.

You can do anything that you want in next.js, and pay attention 'each answer that you recieve is a personal advice from another developers and it can be completely optional'.

for me:

• Whenever I want to seperate my codes for creating a re-usable component, I'm creating a UI directory for my buttons, inputs, and everything related to our design system. After that I'll managing the required props for them, and extra options that I need to handle in another place for using the component.

• In my opinion, you don't need create a custom component for each element that you have in your design. If it is a common element, create a component. If it isn't, just use it everywhere that you need and create everything so simple.

• I love tailwind. It is a nice tool for creating UI. But now I don't use it directly. Because you need to put it classes everywhere! I prefer using a powerful UI framework. for example in my opinion, Chakra UI is a fully customizable, powerful, and simple tool that I can works on it. It is so simple, and makes my project small. You don't need to put tailwind classes in your component, you just call the component that you need, config it in the configuration and boom! that's done. You can change anything that you want in Chakra's components.

• And in my opinion, if you are repeating anything in a react project, it can be handle in a better way. Just find the best option that you have. If you need create custom component, do it. If you need handle something in just a place, do not! If you have a function that you need it in several places, create a custom hook for it. and so on...

A less tedious method is to use the element.getBoundingClientRect as @Mehran Hatami mentioned.

Here's the code you need:

let elem = document.querySelector("<element>");
let rect = elem.getBoundingClientRect();
if(rect){
  const { width, height } = rect;
  console.log( width, height )
}

You should associate .yml extension with YAML files.

Go to Settings > Editor > File Types select YAML in Recognized File Types and add *.yml for this name pattern

~/.bashrc is only executed for login shell. If you want it to be executed in the next RUN commands, you must specify it explicitly, like this:

RUN bash -l -c '...'

or

RUN . ~/.bashrc; ...

I'm also working with ClickOnce application and let do the update by remote web server, then every time the customer launch the application the file are overwritten.

A suitable solution may be, as answered in short above, to copy the file(s) that should not being updated in a different folder than the one where the main application reside.

This approach can be done with every type of file and the destination folder can be the %appdata% folder so by means of C# you can retrieve this path in the following way:

string appdatapath = Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData);

Now, when the application start, you have to check if a dedicated folder existing into the appdatapath above; if not you can create it and copy the interesting file(s) inside; if the folder is already present when the application is updated you can copy back to the main application folder the backup copy of the saved file. In this way you can preserve these file to be rewritten every time by an update process of the application.

While this approach is able to work properly, have also one drawbacks.

When you have to uninstall the application this backup folder, because is outside the application folder, will be not deleted! So be aware about storing this file(s) in a clear way expecially if they are related to private info, keys, passcode or other sensitive stuff.

To overcome such limitation a solution may be to store the file(s) after ciphering them so the content will be "in theory" virtually protected or at least more protected than will be by let them saved into the original way.

Another aspect of this task is if some files need to be updated by the application itself (for example think about a local database that have to work as dynamical data storage about some data acquired from different sensors) and then after some time the application itself needs to be updated.

In this scenario, where the information to be stored is not, let's me say, static, you need to backup it before the application is closed by the user. So you need to do a check when the application is going to be closed hence if some of the files to be kept have changed you need to store them in the backup folder.

So it seems ok, but let see what can be a possible trouble here. If the application is forced to be closed in a not clean way may be this task is not executed and then some data lost if the application update was planned to do at the next application start (this is an option provided by the ClickOnce wizard) because some data was not backup during the last application closing.

Unfortunately, at least I've not found solution inside the standard ClickOnce settings at now, there is no option to exclude some files from being updated after the first deployment and then some alternative way must be implemented to overcome such limitation.

Best regards. Fire

Another option is to use mutate-split filter plugin like that:

mutate {
    split => { "[language]" => "," }
}

NOTE: You should use separator character that is never included in original string for proper conversion.

Had the same issue.

So first download jdk17 from respective website. then use this command in terminal of your project

flutter config --jdk-dir /Library/Java/JavaVirtualMachines/temurin-17.jdk/Contents/Home

from "/Library" to "/Home" is your desired jdk location.

This is another fix that worked for me https://stackoverflow.com/a/73985328/8764293

I faced similar issue, I had to go and un-check "Use '--release' option for cross-compilation (java 9 and later) under File > Settings > Build, Execution, Deployment > Compiler > Java Compiler

For Debug mode:

keytool -list -v -keystore ~/.android/debug.keystore -alias androiddebugkey -storepass android -keypass android 

for Release mode:

keytool -list -v -keystore {keystore_name} -alias {alias_name}

example:

keytool -list -v -keystore C:\Users\MG\Desktop\test.jks -alias test

The issue happens because there are still entries about the previous virtual machines that you have created for your previous hostpool. So, check now in Entra ID -> Devices, here you will see all the devices, delete the ones youre not using and redeploy again your AVD, it should work.

It's possible to integrate the Highcharts with Next.js through react wrapper. You can read more about it here: https://www.npmjs.com/package/highcharts-react-official#highcharts-with-nextjs

In terms of creating a custom indicator there are some docs and tutorials here:

• https://www.highcharts.com/docs/stock/custom-technical-indicators
• https://www.highcharts.com/blog/tutorials/creating-custom-technical-indicators-financial-charts/

صانع السكربت سعد ماب البيوت

loadstring(game:HttpGet("https://rawscripts.net/raw/Brookhaven-RP-Brookhave-lraq-20207"))()

The formula is very simple: 1 thread (virtual user) - 1 account

Given you properly configure JMeter to behave like a real browser each virtual user must exactly represent real user with all its stuff like cookies, headers, cache, think times, etc.

If after iteration is done you want the user to look like "new" and not "returning" - untick the relevant box in the Thread Group:

Not by returning a SYS_REFCURSOR and letting ORDS generates the JSON, it will always be a list of simple objects, if you want a hierarchical structure you need to generate the JSON yourself (JSON_OBJECT, JSON_ARRAY, JSON_ARRAYAGG, ...), and remember to name the column "{}someName" to avoid ORDS to escape it.

You need to convert json2 to Map or ArrayList first, something like:

def json = new groovy.json.JsonSlurper().parseText(json2.toString())

and then you will be able to use this json in the JsonBuilder class.

More information:

• Apache Groovy: Parsing and producing JSON
• Apache Groovy: What Is Groovy Used For?

For kubernetes yml, we can add insecure-registry in args -

• image: wemakeservices/wemake-dind:latest name: dockercontainer args: ["--insecure-registry=k8s-server:30005"] securityContext: privileged: true

I have the same problem in the AppShell

The error text is InitializeComponents

Cannot open file We are unable to open file We are unable to open file AppShell.xaml.sg.cs it may have been moved renamed or deleted

You can set the encoding of the file you are reading from, so

df = sqlContext
    .read
    .option("encoding", "yourEncoding")//replace yourEncoding with whatever your input file encoding is, I asume latin-1?
    .csv("file.csv", header=False, schema = schema)

more on available options here: https://spark.apache.org/docs/latest/sql-data-sources-csv.html#data-source-option

Is there a best practice for this? All solutions provided seem very clunky and unnecessary

Check Color Correction Image

PHOTO COLOR CORRECTION & COLOR CHANGE SERVICE Color correction and color change service involve working with the color of an image. The colorist can modify, change, or enhance the color of the photo as per the instructions. It is a popular service for different types of photography such as model, fashion or natural photography, product photography, and so on. Ecommerce business owners frequently need it nowadays to get desired image quality for their websites.

COLOR CORRECTION SERVICE AT CCPL Photoshop Color Correction Services WHAT IS COLOR CORRECTION? When we manipulate the color of an image to change it fully or partially, then we call it color variant or color correction. We cannot get the natural color each time we capture a photo. Therefore, the colorist makes the necessary changes with the appropriate photoshop tools and makes it crisp, natural, and vivid.

WHO NEEDS THIS SERVICE? Color change service is important for eCommerce business owners to display their products online. Most of the time, they have only one image of any single color variant. Photoshoot of multiple products is expensive and time-consuming. Therefore, while we display our products on the website, we replicate the color variations with the help of color change and color correction techniques.

This service is also important for photographers, studios, and photographic agencies. A photographer cannot always shoot exactly what he wants. Therefore, it requires post-processing to change the color and mode of the image to fulfill the ultimate goal.

TYPES OF PHOTO COLOR CORRECTION Product color change Different individuals may have different color preferences. If you have multiple product variants, then an expert colorist will create any color variant of the same product with photoshop color change techniques. Therefore, you do not need to photoshoot all the products.

Product photo retouching Make your eCommerce product photo look ravishing with our skillful editing services. We can provide you a wide range of supports from clipping path, background removal, color correction to shadow, airbrushing, and many others.

Tint correction When a retoucher works on shadow, tint correction is a common technique. Here, he adds more white color keeping the brightness the same. After applying this, the colors may look a little lighter but it tackles the unwanted shadows.

Highlight correction This service is necessary for various reasons. If the image has a strong backlight or some washed out part due to the camera flash or sunlight, then you need to correct it by highlight correction method.

White balance adjustment If the white balance of a photograph is not perfect it can be over or underexposed. We can correct the exposure of the photo to make it look just perfect.

Contrast correction If the contrast of an image is good, there will be sharp differences among the colors. Therefore, a photograph with a balanced contrast will show the highlights brighter and shadows darker. Thus, the combination of all the colors will be more vivid.

WHEN TO USE THIS SERVICE If you want to change the color of the product keeping everything the same, you need a color-change service. Shooting the photo with the natural color may always not be possible due to the wrongly chosen camera setting. Therefore, you need to correct it in post-processing. If the image is over or underexposed due to the backlight or sunlight, then you need to correct it by taking this service. Sometimes we need to add some color to the image during post-production to make the photo more natural. Therefore, we need this service. ADVANTAGES OF PHOTO COLORIZATION SERVICE Color correction and color change services can save you a lot of money and time. You do not need to photoshoot multiple pictures for different color variants. All we can do in post-production. You can adjust and correct the color of an image if you have accidentally chosen an incorrect camera setting during shooting the photograph. You can also correct over or underexposed imaged if the lighting setting was not perfect during the photoshoot. This service makes sure the saturation, tints, noise, white balance, contrast, and sharpness of the photo is just perfect. Color correction service can change the mood, look, and overall feel of the image to fulfill the ultimate intention of the photo. WHY COLOR CORRECTION SERVICE FROM CCPL Creative Clipping Path Limited is a renowned image editing and color change service provider in this industry for more than eight years. We have a team of 400+ expert photo colorists who have edited millions of photos. It has boosted them with tons of experience. Therefore, they know what is important for you to minimize the cost and increase the conversion.

We have an in-house training facility. Therefore, our photo editors never lag behind the latest updates on the tools and techniques. Our 24X7 support team is always ready to answer all your questions within a few minutes. If you have any questions or any confusion, then do not hesitate to contact us or request a free trial.

Visit Us

resource "azurerm_storage_account" "st" {
    name = var.st.name
    resource_group_name = var.rg_shared_name
    location = var.rg_shared_location
    account_tier = var.st.tier
    account_replication_type = var.st.replication
    public_network_access_enabled = false
    allow_nested_items_to_be_public = false
}
This is correct!!
Thank you

I experienced this error in a Remix app and solved it using this instead.

import {Button} from '@mui/material';

Gradle is a build tool that is used for building, testing, and deploying software. It is for manage project dependencies and automate tasks in programming languages, like Java and Kotlin but the AGP is a set of plugins for developers building android apps.It integrates with Gradle to provide Android-specific build configs.

I have seen below metric at quite a few places to get the cluster cpu usage. sum(rate (container_cpu_usage_seconds_total{id="/"}[1m]))

Can someone explain how it is different from sum(rate(container_cpu_usage_seconds_total{}[$__rate_interval]))

The caret symbol (^) indicates that Poetry is free to install any version matching the leftmost non-zero digit of the version string. For example, if the Requests library releases a new version 2.99.99, then Poetry will consider it an acceptable candidate for your project. However, version 3.0 wouldn’t be allowed.

The idea behind this follows the semantic versioning scheme (major.minor.patch), where minor and patch updates shouldn’t introduce backward-incompatible changes. Still, this is just an assumption that could break your builds, and some notable Python developers disagree with such a choice of defaults on behalf of Poetry.

Ref: https://realpython.com/dependency-management-python-poetry/

• 101.011

  1 * 2^0 = 1 1 * 2^1 = 2 0 * 2^2 = 0 1 * 2^3 = 8 0 * 2^4 = 0 1 * 2^5 = 32

  1 + 2 + 0 + 8 + 0 + 32 = 43

• 101.011

  1 * 2^0 = 1 1 * 2^1 = 2 1 * 2^2 = 4

  1 + 2 + 4 = 7

to check here

This might answer your question. https://stackoverflow.com/a/59405918/8764293

Basically we are removing the auto generated podfile.

then do

cd ios && pod install

I can confirm this answer works. You must be patient as it takes a long time to delete, and the Table of Contents or Index of courses does not seem to delete as fast as the actual courses. If doing hundreds, let the delete run for a few hours.

I think I missed this part in my androidmanifest.xml file : In line 1 :

What it was before :

<manifest `xmlns:android="http://schemas.android.com/apk/res/android">

what I added : package="com.wizpeertourguidefe"

what it should have been :

<manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.wizpeertourguidefe">

after this I did gradlew clean and then the build ran with no problems.

I have set columns from B to F like below:

with pd.ExcelWriter(r'C:\Users\Personal\output.xlsx') as writer:
        df.to_excel(writer, sheet_name='IBM_DATA', index=False)

        # below code use for column formatting
        wb = writer.book  # get workbook
        ws = writer.sheets['IBM_DATA']  # and worksheet

        # add a new format then apply it on right columns
        currency_fmt = wb.add_format({'num_format': '0.0000'})
        for col in range(1,5):
            ws.set_column(col,col,15, currency_fmt)

It's finding the x recipe but it requires you to add x11 to the DISTRO_FEATURES variable. Though you have added it, it's Missing when the x recipe is built. Possible reasons, some other recipe removes x11 from distro variable or syntax error in the place you added. Use bitbake -e command to debug and

Thanks for the update Alexander Fedorov. Do you have a plan to put the artifacts in Maven Repo?

I had issue: react-native doctor showing: ' ✖ Android SDK - Required for building and installing your app on Android

• Versions found: N/A
• Version supported: 34.0.0'.
  Issue wasn't resolved even after setting environment variables. I went to sdk manager. Installed one more version of 'build-tools' and latest 'command-line tools. That solved the issue.

For anyone wondering what is going one with his network or company's artifactory - I had duplicated settings.xml file in maven directory and in myuser/.m2 directory. When I deleted global settings.xml file problem was solved. Files were same so I don't understand this but it somehow helped.

git -c user.useConfigOnly=true commit --quiet --allow-empty-message --file - Error: Scanning failed: 'content-type'

could anyone have any idea

we cant able to commit the co

What information you need

If we are talking about Diagnostic on CAN, then to be able to say whether this communication is using UDS protocol you need to know:

• CAN Addressing format
• Addressing Information parameters
  • if Normal Addressing format is used:
    • pair of (for request and response) CAN Identifiers for functional addressing
    • pair of (for request and response) CAN Identifiers for each ECU that can be physically addressed
  • if Normal Fixed Addressing format is used, it would be simpler as CAN ID scheme is known, so it is enough to get:
    • priority parameter for physical addressing
    • priority parameter for functional addressing
    • (Source for request, Target for response messages) Address of diagnostic tester
    • (Target for request, Source for response messages) Address for each ECU in the vehicle
  • if Extended Addressing format is used, it is the hardest as we need:
    • pair of (for request and response) CAN Identifiers and Target Address (1 byte) parameters for functional addressing
    • pair of (for request and response) CAN Identifiers and Target Address (1 byte) parameters for each ECU that can be physically addressed
  • if Mixed Addressing format with 11-bit CAN Identifier is used then we need:
    • pair of (for request and response) CAN Identifiers and Addressing Extension (1 byte, the same value for request and response messages) parameter for functional addressing channel
    • pair of (for request and response) CAN Identifiers and Addressing Extension (1 byte, the same value for request and response messages) parameter for each ECU that can be addressed physically
  • if Mixed Addressing format with 29-bit CAN Identifier is used then we need:
    • priority parameter for physical addressing
    • priority parameter for functional addressing
    • (Source for request, Target for response messages) Address of diagnostic tester
    • (Target for request, Source for response messages) Address for each ECU in the vehicle
    • Addressing Extension (1 byte, the same for request and response message) for each communication channel (usually the value is unique for each vehicle's network)

How to get them

Certain ways

The only way to be sure that the communication you are observing is diagnostic communication is basing on OEM (e.g. Toyota, FIAT) requirements. So basically, you need to get some piece of documentation or get an access to their standards about diagnostic communication. Those information are either public or have leaked for older car models.

Probable ways

If you have an option to observe diagnostic (UDS) communication, then you would be able to figure out most of the previously mentioned variables/parameters.

In every diagnostic communication you will see Tester Present and Diagnostic Session Control services being used. So you can look for:

• Tester Present requests will have following data

  might be one byte here 02 3E 00 might be data padding here

  might be one byte here 02 3E 80 might be data padding here

• Tester Present response will have following data

  might be one byte here 02 7E 00 might be data padding here

• Diagnostic Session Control request will have following data

  might be one byte here 02 10 XX might be data padding here

  • XX would usually be equal 01, 02, 03 or 04, but might be any value

• Diagnostic Session Control response will have following data

  might be one byte here 02 50 XX or 06 50 XX YY ZZ WW VV might be data padding here

  • XX be repreated value from request
  • YY, ZZ, WW, VV might be various values

Guessing

Just sending blindly requests (e.g. Tester Present) and hoping for a response. If we assume Normal Fixed Addressing format (which is most likely to be used), this is relatively possible to figure out.

Can you show your next.config.js and package.json?

Storing records in a database in an opaque format is not advisable, no matter how compact the record format is. It carries huge disadvantages, both for reading and writing data:

Reading: it makes it impossible to index records based on their attributes, making queries very slow (as you already mentioned: "we would not have any ability to search records based on any attributes")

Writing: it prevents databases to compress the data. Column databases, for example, they store column values together. As these are usually similar, this compresses extremely well; usually better than compressing records.

This asserts that "xyz" occurrs n times anywhere in myString.

Matcher matcher = Pattern.compile("xyz").matcher(myString);
assertThat(matcher.results().count()).isEqualTo(n);

for web based 3d avatar with lip syncing and facial animation, there is a simple sdk, take a look at the following link: https://www.reddit.com/r/threejs/comments/1g1um1q/an_outofthebox_3d_avatar_engine_for_threejs/

The default timezone for GitHub Workflows is UTC, You may make the adjustments accordingly as per your local time.

Solved by adding "FUNCTIONS_INPROC_NET8_ENABLED": "1" to local.settings.json

{ "IsEncrypted": false, "Values": { "AzureWebJobsStorage": "UseDevelopmentStorage=true", "FUNCTIONS_INPROC_NET8_ENABLED": "1", "FUNCTIONS_WORKER_RUNTIME": "dotnet" } }

Mlike Eps I've been facing the same problem, have you solved this issue?

Here you can find the shopify liquid object document for generic_file's all attributes.

For me, Browser Router worked.

I was actually using Hash Router before, and I switched to browser router and it worked like a charm. The local and build both worked perfectly.

This might also happen if you do poetry env use 3.x inside a deleted poetry environement.

As of Rider:

Version: 2024.2.6 Build: 242.23339.62 9 October 2024

It does not seem to be possible to have per project theming.

Short answer:

document.addEventListener("DOMContentLoaded", function() {
    window.addEventListener('scroll', function(){
        console.log("X-Position", window.scrollX)
        console.log("Y-Position: ", window.scrollY) 
    })
})

Note! pageXOffset and pageYOffset is deprecated

• https://github.com/microsoft/TypeScript/blob/d2fdf851cc630d812b7b336a43cc1f363ba25083/src/lib/dom.generated.d.ts#L25658C40-L25658C40

Check if

1. you are not using the right environment
2. Your license/trial has expired

adb shell settings get global ntp_server

Shared Settings for macOS App and Plugin Using App Groups

Background

You're developing a macOS application that consists of a main application and a plugin. You want both targets to share the same settings, manipulated using a Defaults class, which extends UserDefaults.

Implementation

Defaults

You've extended UserDefaults as follows:

extension UserDefaults {
    static let group = UserDefaults(suiteName: "the same as app group????")
}

And created a Defaults class:

import SwiftUI

class Defaults: ObservableObject {
    // Initial set of user settings
    @AppStorage("some_value", store: .group) var someValue: Bool = false
}

You then reference values and bindings using:

@StateObject var defaults = Defaults()

App Groups

You've added App Group capability to each of your targets, as shown in the image.

Questions and Answers

1. What's the relationship between suiteName and string provided within the App Group field?

   The suiteName in UserDefaults(suiteName:) should match the App Group identifier you've set up in your target capabilities. This allows different parts of your app (or different apps in the same group) to access the same set of preferences.

2. Given the product outline (macOS app + plugin), what's the correct implementation?

   The correct implementation is:

   a) You should use the same string as the App Group value and suiteName.

   Here's why:

   • The App Group identifier you set in your target capabilities (e.g., group.com.yourcompany.yourappgroup) defines a shared container that both your main app and plugin can access.
   • By using this same identifier as the suiteName when initializing UserDefaults, you're telling your app to use the shared container for storing and retrieving preferences.

   Correct implementation would look like this:

   extension UserDefaults {
       static let group = UserDefaults(suiteName: "group.com.yourcompany.yourappgroup")
   }
   

   Where "group.com.yourcompany.yourappgroup" is the exact string you've entered in the App Groups capability for both your main app and plugin targets.

Additional Notes

1. The $(TeamIdentifierPrefix) is typically used in the App Group identifier when you're setting it up in Xcode. However, when you're actually using it in code, you should use the full, expanded string.

2. You can find your full App Group identifier in your Apple Developer account or in Xcode after you've set up the App Groups capability.

3. Make sure both your main app and plugin have the App Groups entitlement and are part of the same group.

4. When distributing your app, ensure that the App Group capability is properly set up in your provisioning profiles and that both the main app and plugin are signed with the correct team and provisioning profile.

5. Remember to handle cases where the shared UserDefaults might not be available (e.g., if the App Group isn't properly set up). You might want to fall back to standard UserDefaults in such cases.

References

• Apple Developer Documentation: Configuring App Groups
• Apple Developer Documentation: Sharing Data with Your Containing App
• UserDefaults Apple Documentation

Now I'll have to preface this by saying, it has been a while since I written in GDScript.

But you do not have start defining functions by using Def, but all you have to do is use func name():

Here's an example of how functions are used in Godot

Besides this, I would recommend placing var at the top of your code.

Also, what is the idea here? Because it seems like you're trying to do an array.

have you found solution for your issue?

For WSL just use command wsl --update

If the task gets stuck in a "Starting" state, it is likely that it's crashing as soon as it starts up. The easiest way to work out why is to look at the task log -- you can access that from the first button in the "Action" column.

Always on tasks

also worth noting that this functionality is only available for paid accounts. I assume this isn't the case, but worth noting.

The error means that you cannot delete the Salaries because they are referenced by another table in your database. See Stack Overflow:I got error "The DELETE statement conflicted with the REFERENCE constraint"

So I am searching for the same solution now but unfortunately, according to this link the answer is A BIG NO!!!

but there is a workaround to patch the feature's absence using middleware.

I am searching for a better solution like some extension library to add this ability to the YARP.

Can you check if you have any .env file

If so just update it with your newer path for example

COMPOSE_PROJECT_PATH=/mydocs/Dev/docker/compose

For android studio to run iOS Platform, you should try run app by command line using Terminal. Then switch back to Android studio. And now you can run. Remember to set platform target larger than 13

The problem was that the Chakra provider was missing for the component in turn with no breakpoints configured. Adding the Context provider in the component library will fix the issue by providing default theme but will override the theme of the application that consumes this component causing theming issue. Marking the Chakra ui as peer dependency and excluding it from the roll up will ensure the theme is provided from the consuming application without theme conflict.

refer following discussion for details https://github.com/chakra-ui/chakra-ui/discussions/4534, and thanks @goutamsamal9 for helping figure it out.

For those not wanting to use the Newtonsoft.Json Package and instead want to use the System.Text.Json.Serialization Package, you can alternatively use this:

[JsonPropertyName("foo")]
[JsonIgnore(Condition = JsonIgnoreCondition.WhenWritingNull)]
public string? Foo { get; set; }

JsonIgnoreCondition Documentation

Did you by any chance solve this issue? I'm also getting pretty desperate.

kind regards

a

You might want to check the API wit/queries as mentioned in the link -https://learn.microsoft.com/en-us/rest/api/azure/devops/wit/queries/get?view=azure-devops-rest-7.1&tabs=HTTP

or https://learn.microsoft.com/en-us/rest/api/azure/devops/wit/wiql/query-by-wiql?view=azure-devops-rest-7.1&tabs=HTTP where in you can pass the query, which can be your view as well.

Follow this tutorial, it explains how to delete your screen lock for newer Android versions, also it tells you how to do it without root, using adb

https://www.esper.io/blog/how-to-disable-the-lock-screen-on-android

You're trying to debug the server by looking at the client output. This isn't the right approach. All of the documentation says to run the server in debug mode, and then read the output.

In this case, radclient has the blastradius mitigations added to it. i.e. it's always sending Message-Authenticator in Access-Request packets, even when the input file doesn't explicitly include Message-Authenticator.

Run the server in debug mode, and read the output. You will see that it is receiving an Access-Request which contains Message-Authenticator.

The answer to your question is yes like others have pointed out.

If you are inclined to use both together, which is what some people do depending on their comfort level, you can do the below -

lets say you read data into pyspark dataframe, then use createOrReplaceTempView or the globaltempview. Write SQL on top of it and execute your transformation.

then push the dataframe back to the destination either in lakehouse or datawarehouse.

Very simple fix for me, restarted computer.

It seems to be an open bug: https://github.com/golang/go/issues/20744

123

Can you give me some details about the virtual machine you are using? (OS, glibc version, etc.)

The accepted answer by TiMeJuMp works, but I had to install the German language pack first via:

Install-Language de-DE

Unfortunately Windows 10 does not seem to warn about the missing language pack when trying to change the language without it.

See also: https://learn.microsoft.com/en-us/powershell/module/languagepackmanagement/install-language

Ciao, ho un problema analogo al tuo e sono giorni che sto impazzendo ma con scarsi risultati. Ho trovato ora la tua soluzione ma continua a non funzionarmi.

Ho provato sia la prima soluzione aggiungendo

@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "richiestaPrecheckMessaggioSIIType", namespace = "http://www.acquirenteunico.it/schemas/2010/SII_AU/MessaggioSII")
public class RichiestaPrecheckMessaggioSIIType
    extends MessaggioSIIType
{
    @XmlAttribute(name = "type", namespace = XMLConstants.W3C_XML_SCHEMA_INSTANCE_NS_URI)
    private String xsiType = "richiestaPrecheckMessaggioSIIType";
}

Che la seconda soluzione aggiungendo lo @SchemaValidation ma anche qui senza risultati.

@WebService(targetNamespace = "http://www.sii.acquirenteunico.it/PK1", name = "PK1")
@XmlSeeAlso({ObjectFactory.class})
@SOAPBinding(style = SOAPBinding.Style.RPC)
@SchemaValidation(type = SchemaValidationType.OUT)
public interface PK1 {

    @WebMethod(operationName = "PK1.0050", action = "PK1.0050")
    @WebResult(name = "MessaggioSII", targetNamespace = "http://www.sii.acquirenteunico.it/PK1", partName = "MessaggioSII")
    public AmmissibilitaVerificaMessaggioSIIType pk10050(

        @WebParam(partName = "MessaggioSII", name = "MessaggioSII")
        RichiestaPrecheckMessaggioSIIType messaggioSII
    );

    @WebMethod(operationName = "PK1.0051", action = "PK1.0051")
    @WebResult(name = "MessaggioSII", targetNamespace = "http://www.sii.acquirenteunico.it/PK1", partName = "MessaggioSII")
    public EsitoIntegrazioneRichiestaMessaggioSIIType pk10051(

        @WebParam(partName = "MessaggioSII", name = "MessaggioSII")
        IntegrazioneRichiestaPrecheckMessaggioSIIType messaggioSII
    );
}

Cosa sto sbagliando? l'errore che continuo a ricevere MessaggioSII without attributes (xsi:type is requred)

Spero tu possa essermi di aiuto, grazie in anticipo Manuel.

I dont know if its still relevant but get final embeddings before decodings as vectors for your data and fit t-sne with that. You may need to play with perplexity for good visualisation.

Here! this can help, it's a very easy tutorial https://www.youtube.com/watch?v=kVOym20oTR4

Resource Manager --> then click on "+ icon"(add resource to module) -->Import Drawable option working for me in Android Studio Koala Feature Drop | 2024.1.2.

I faced the same issue (even with the same context generations). Unfortunately, the trick you described doesn't work for me.

As far as I can see in a stacktrace, a built-in framework's interceptor net.devh.boot.grpc.server.error.GrpcExceptionListener which processes @GrpcExceptionHandler annotations is called earlier than other GlobalServerInterceptors in a chain, that's why I'm not sure if @Order makes any effect here.

Could you guide me on how to reach a desirable behaviour?

Thanks!

You can also use pattern matching in the newer versions if(array is null or [])

If your schema complexity needs do not require SQLite, there is also Native DB which is much easier to maintain and develop. An example with Tauri V2 is available here native_db_tauri_vanilla.

The following imports make HeadlessUI work for me:

  "imports": {
    "@/": "./",

    "$fresh/": "https://deno.land/x/[email protected]/",
    "preact": "https://esm.sh/[email protected]",
    "preact/": "https://esm.sh/[email protected]/",
    "@preact/signals": "https://esm.sh/*@preact/[email protected]",
    "@preact/signals-core": "https://esm.sh/*@preact/[email protected]",
    "tailwindcss": "npm:[email protected]",
    "$std/": "https://deno.land/[email protected]/",
    "swr": "https://esm.sh/v98/[email protected]?alias=react:preact/compat&external=preact/compat",
    
    "@heroicons/react/24/outline": "https://esm.sh/@heroicons/[email protected]/24/outline?alias=react:preact/compat,react-dom:preact/compat&external=react,react-dom",
    "@headlessui/react": "https://esm.sh/@headlessui/[email protected]?alias=react:preact/compat,react-dom:preact/compat&external=react,react-dom",
    "@floating-ui/react": "https://esm.sh/@floating-ui/react@latest?alias=react:preact/compat,react-dom:preact/compat&external=react,react-dom",
    "@tanstack/react-virtual": "https://esm.sh/@tanstack/react-virtual@latest?alias=react:preact/compat,react-dom:preact/compat&external=react,react-dom",
    "@react-aria/interactions": "https://esm.sh/@react-aria/interactions@latest?alias=react:preact/compat,react-dom:preact/compat&external=react,react-dom",
    "@react-aria/focus": "https://esm.sh/@react-aria/focus@latest?alias=react:preact/compat,react-dom:preact/compat&external=react,react-dom",

    "preact/hooks": "https://esm.sh/[email protected]/hooks",
    "react": "https://esm.sh/[email protected]/compat",
    "react-dom": "https://esm.sh/[email protected]/compat"
  },

as seen here: https://github.com/perguth/denoland-merch

For me what worked was to add this in the pipeline:

environment {
        PATH = "C:\\Users\\your_user\\AppData\\Roaming\\npm;${env.PATH}"
    }

The onTapOutside property in a TextField allows you to easily dismiss the focus from the text field and hide the keyboard with just a single line of code.

TextField(
      onTapOutside: (event) => FocusManager.instance.primaryFocus?.unfocus(),
)

The default behavior when using Gauge for testing is to stop the execution if a specification fails. When running tests, you can use the --continue-on-failure flag if you wish to run all specs regardless of whether some fail.

There are also databases that are fully integrated with a language, such as in Rust: native_db. But you cannot use it cross-language.

What is your coredump_filter setting ? It will be under /proc/

The value in that file is in Hex and refer the linux documentation on core (man core). The bit 4 needs to be set to dump all ELF headers.

Thanks for your guidance but,

Even though I triggered the Custom Action at the Finish Dialogs Stage, I encountered the following error when attempting to move the log file:

"The file is being used by another process."

This issue likely occurs because the Microsoft Installer (MSI) locks the log file during the installation process. In response, I tried copying the log file instead of moving it, with a 2-second delay before the operation. However, the log file still contained incomplete data.

The likely reason for this behavior is that MSI continues to write to the log file until the entire installation process, including the MSI session, has fully closed. Since the Custom Action is triggered before the MSI process completely shuts down, it’s possible that not all log events are captured by the time the log file is copied.