You make assumptions about how the file is read and where the write seek position is. Mode "r+" supports write-after-seek, however, you have to explicitly seek to that position.

with open('test.txt','r+') as f:
  f.seek(f.tell())
  f.write("wow!")
  f.flush()

test.txt now contains:

Helwow!orld!

See also Difference between modes a, a+, w, w+, and r+ in built-in open function?

I just had this issue (who tf is using eclipse in 2025?) and the solution was a little odd. The error log complains:
Error parsing profile eclipse/p2/org.eclipse.equinox.p2.engine/profileRegistry/epp.package.jee.profile/172837742.profile.gz
So I just went to that location and for some reason it was set to -rw------- and owned by root. So... I just did a lil
sudo chown 664 <profile>.gz
After that, I just made it no longer owned by root and that fixed the issue.

Gitflow is a strategy for managing source code changes, while Git-based deployment in Fabric is a mechanism for deploying Fabric artifacts to different environments based on changes in a Git repository. Fabric's deployment can utilize a Gitflow strategy as part of its configuration and automation.

As mxasd said, there is a MS Fabric Git Integration documentation you can go to if you want to know more about this difference.

For future reference : I asked the same question on reddit and a nice gentleman gave me the following answer. The post is here

Pooled contexts are registered as singletons basically, which means they can't resolve scoped services.

WebApplication just enables dev only checks that throw exceptions in this case, looks like Host variant doesn't.

Changing from .AddDbContextPool() to AddDbContext() fixed the issue. Thank you, kind gentleman.

Alright. I found it thanks to this article Medium article. Basically I add to set the id to null before saving it, but because of the constraints on my Class I needed to have an id in the csv file for the csv parsing

So in the setup method I did :

public void setupNews(News news) {
        news.setId(null);
        newsRepository.save(news);
        }
    }

the error message "Bucket name must match the regex '^[a-zA-Z0-9.\-_]'" is indicating that your bucket name, "Bucket_Source", contains an underscore (_), which is not allowed in an S3 bucket name

Can this be edited to work within a DIV?

In the 1990's I used to make BIOS calls (in C/C++ or Assembly) to access some hardware without needing to use the MS-DOS. In general, it was just for fun. But, for my games, I needed to use BIOS interrupt calls to the time system (to play music) and the keyboard (to make the keys function like a joystick).

I had the same issue - my fix:

$acl = Get-Acl "C:\Users\<user>\.azure-kubelogin\kubelogin.exe"
$permission = "Everyone","ReadAndExecute","Allow"
$accessRule = New-Object System.Security.AccessControl.FileSystemAccessRule $permission
$acl.SetAccessRule($accessRule)
Set-Acl "C:\Users\<user>\.azure-kubelogin\kubelogin.exe" $ac

Everything worked after that

Now you can 😅

I co-authored the following article that is a very detailed step-by-step guide to do so : 🦓 Implement a Safari iOS Extension with React Step-By-Step.

Do not hesitate if you have any question :)

local_mode seems deprecated in the latest version (currently 2.44.0).

For me print didn't work with an address provided.

ray.init(address="ray://10.91.15.123:10001", local_mode=True)

But without address it works.

ray.init(local_mode=True)

These sporadic 30–300s response delays typically stem from slow or stalled client reads or rare TCP stalls (packet loss/retransmissions). Your aiohttp app logs “done” after passing data to Gunicorn, while Apache only logs when the client fully receives it. A slow or flaky network/client causes the proxy to hold the socket open, delaying the final Apache log. Checking socket states (ss, netstat), Apache’s mod_status, and TCP retransmissions can confirm this. The rest of the system is likely fine—this is common when dealing with a small fraction of slow or interrupted clients.

Since you have an AFTER INSERT trigger that updates the row that was just inserted, the sequence of events is as follows:

1. The row is inserted

2. The AFTER INSERT trigger fires and performs an UPDATE.

3. The AFTER UPDATE trigger fires and logs the update

4. The AFTER INSERT trigger fires and logs the insert

As a result, you see the update before the insert in the log.

To resolve this issue, you need to set the trigger positions so that the logging trigger fires before the updating trigger.

I just published this helm chart:

📌 https://artifacthub.io/packages/helm/helm-watchdog-pod-delete/helm-watchdog-pod-delete

📌 https://github.com/aeciopires/helm-watchdog-pod-delete

It installs a watchdog in the cluster that monitors the Pods and removes those with the CrashLoopBackOff or Error status, forcing a rebuild (if they are being managed by a controller, such as: deployment, replicaset, daemonset, statefulset, etc).

The use case is:

🔧 Reduce manual intervention to rebuild Pods.

🔥 Fix issues with sidecars and initContainers by ensuring that Pods are fully restarted instead of remaining in a partially functional state.

🌍 Resolve race conditions caused by external dependencies being unavailable at startup, ensuring that Pods retry startup when dependencies are ready.

#kubernetes #k8s #helm #devops #CloudNative

Julian, have you solved this, if not, let me know and I will send you a solution.

Thank you, Zain! You saved me some time. But here’s my version without extra imports:

(viewPager.getChildAt(0) as? RecyclerView)?.isNestedScrollingEnabled = false

I'm facing the same issue. Has anyone managed to solve it?

Paths can be case sensitive in the workflow yaml you have:

mkdir -p QualityControl/coverage && ls -ld QualityControl/coverage

In the docker compose you have:

target: /usr/src/app/coverage

Whilst this is the target not the source this makes me wonder if you have when specifying the full path varied the case?

idk vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

INFO] --- maven-failsafe-plugin:3.0.0-M5:verify (run-tests) @ javaoctave ---

[DEBUG] Configuring mojo org.apache.maven.plugins:maven-failsafe-plugin:3.0.0-M5:verify from plugin realm ClassRealm[plugin>org.apache.maven.plugins:maven-failsafe-plugin:3.0.0-M5, parent: jdk.internal.loader.ClassLoaders$AppClassLoader@277050dc]

[DEBUG] Configuring mojo 'org.apache.maven.plugins:maven-failsafe-plugin:3.0.0-M5:verify' with basic configurator -->

[DEBUG] (s) basedir = /home/ernst/OpenSource/OctaveInJavaGit/octaveInJava/javaoctave

[DEBUG] (s) reportsDirectory = /home/ernst/OpenSource/OctaveInJavaGit/octaveInJava/javaoctave/target/failsafe-reports

[DEBUG] (f) session = org.apache.maven.execution.MavenSession@1416a80a

[DEBUG] (s) skip = false

[DEBUG] (f) summaryFile = /home/ernst/OpenSource/OctaveInJavaGit/octaveInJava/javaoctave/target/failsafe-reports/failsafe-summary.xml

[DEBUG] (s) testClassesDirectory = /home/ernst/OpenSource/OctaveInJavaGit/octaveInJava/javaoctave/target/test-classes

[DEBUG] (s) testFailureIgnore = false

[DEBUG] -- end configuration --

[DEBUG] Failsafe report directory: /home/ernst/OpenSource/OctaveInJavaGit/octaveInJava/javaoctave/target/failsafe-reports

Thanks to @hans-passant, issue was VAX. Installed a new version and the problem is resolved.

Passing setState is totally fine. In fact its more stable. Unlike function we define, the reference of the setState doesn't change when component rerenders so we can also pass it directly to the memoized component. Meanwhile in case of the defined function we need to use useCallback to keep the reference same on every re-render. If the type of the function in the props is different then the type of state then we have to send another function. Otherwise, you can decide which you prefer.

You need to use this

timeScale: {
  timeVisible: true,
}

https://tradingview.github.io/lightweight-charts/docs/api/interfaces/TimeScaleOptions#timevisible

This will show the time on crosshair and on the x-axis when zoomed.

There is a lot of errors/warnings like that across the library with different types of conversions (in total more than 100):

1. error: conversion to ‘float’ from ‘double’ may alter its value [-Werror=float-conversion]

2. error: conversion to ‘unsigned char’ from ‘uint32_t {aka unsigned int}’ may alter its value [-Werror=conversion]

3. error: conversion from ‘int’ to ‘uint8_t’ {aka ‘unsigned char’} may change value [-Werror=conversion]

Of course one can turn off Werror or Wconversion flags and then all this errors will disappear, but what if project requires compilation with this flags and how to find such types of errors in users code if these flags are turned off.

Maybe it is makes sense to precisely cast types to appropriate where it can cause compiler problem? E.g.
uint8_t Y = (uint8_t)(X); (in C)
uint8_t Y = static_cast<uint8_t>(X); (in C++)

I know it's been a while but I finally figured out how to get the WhatsApp notification image.

I decompiled an app that could intercept the images (it's on the Playstore) and I managed to find out how it did it.

First get the URI of the image:

private fun getUriFromNotification(notification: Notification): Uri? {
    val parcelableArray = notification.extras.getParcelableArray(m.EXTRA_MESSAGES)
    return parcelableArray?.let { getUriFromParcelableArray(it) }
}

private fun getUriFromParcelableArray(parcelableArr: Array<Parcelable>): Uri? {
    if (parcelableArr.isEmpty()) return null

    val lastParcelable = parcelableArr.last()
    return if (lastParcelable is Bundle) {
        lastParcelable.getParcelable("uri")
    } else {
        null
    }
}

After that convert to your taste (mine is base64)

fun getFileAsBase64(context: Context, uri: Uri): String? {
        val contentResolver: ContentResolver = context.contentResolver
        val inputStream: InputStream? = contentResolver.openInputStream(uri)

        inputStream?.let {
            // Converte InputStream para Base64
            val byteArrayOutputStream = ByteArrayOutputStream()
            val buffer = ByteArray(1024)
            var bytesRead: Int
            while (it.read(buffer).also { bytesRead = it } != -1) {
                byteArrayOutputStream.write(buffer, 0, bytesRead)
            }
            val byteArray = byteArrayOutputStream.toByteArray()

            // Converte para Base64
            return Base64.encodeToString(byteArray, Base64.NO_WRAP)
        }

        return null
    }

given foo2bar[A]: Conversion[Foo[A], Bar[A]] with
  def apply(x: Foo[A]): Bar[A] = ???

Create a ~/.actrc file containing --container-architecture=linux/amd64.
This also works with the GitHub Local Actions VSCode plugin.

https://nektosact.com/usage/index.html#configuration-file

Bonjour,

Je confirme que with open ferme automatiquement

We found the issue. We needed to modify the context constructor

public Model()
     : base("name=OracleDbContext")
{
    Database.SetInitializer<Model>(null);
}

I don't know EF6 enough to give an explanation, but now we can query the view.

I'm accepting this as answer, maybe it will help someone else in the future.

Exact same issue for me. Popped up all of a sudden.
In my case i solved it by not setting the merchant-id at all since i use standalone buttons and as per documentation: https://developer.paypal.com/sdk/js/configuration/#merchant-id

Don't pass a merchant ID, because it is automatically derived.

In the console i still get the warning though: Payee(s) passed in transaction does not match expected merchant id. Please ensure you are passing merchant-id=xxx or merchant-id=xxx to the sdk url.

In the past we got: Payee(s) passed in transaction does not match expected merchant id. Please ensure you are passing merchant-id={ID} or merchant-id={EMAIL}

So maybe something has changed on their end and they dont allow email anymore?

https://github.com/torresslol/DraggableScrollView

I also looked for a long time, and in the end, I made one myself. Hope it help~

the answer is that the Secret key is empty lead to an empty user class.

How can we add an Event link to an event using HTTP connectors, please?

For appbridge version 4 (Installed through CDN)

open('/your_app_menu', '_self');

or

open('shopify://admin/apps/your_app_slug/your_app_menu', '_self');

Doc Ref

You can use this online tool also

f I modify it in js, it seems that the file will be large and cause a large load on the web. Is there any way to modify the model data or modify the modelstructure using the official API?

I'm not sure what exactly you mean by this but in general, while the model browser provides some basic customization, if you want something more involved, it's typically better to build your custom UI component.

For example, this blog post shows how you could visualize your own tree in a custom viewer panel. You could use this to show the model hierarchy only to the level you want.

When creating a table object in DAX, the code is evaluated and run each time there is a change to the data model. Filters interactions do not impact the table, and therefore you should use a measure instead of a table.

From your example, you should activate the one to many relationship between users and brands, and that should filter the list of users you are looking for.

I'm trying to find our some answers for that as well without success.

Any luck so far ?

This issue is critical when you're working on a vending machine controller and need stable, 24/7 serial communication. I encountered a similar problem in one of my projects and resolved it by switching to the usb_serial package. It worked perfectly and ensured reliable communication.

If your user is not ops I would make sure the ops user has access too possibly by adding it to the group that does have access or if the ops group is the correct group ensure group permissions are appropriate for that directory, just in case inheritance has been overwritten or disabled, this should be checked on the sub directory containing the files to be processed.

You have to make sure that that the iOS Deployment Target which can be found under Build Settings -> Deployment matches the iOS version running on your Simulator. I had the same issue as above because my iOS Deployment Target was set to 18.2 while my simulator was running 18.0

Well i found the reason after experimenting on it for hours it seems that sometimes if the path has any other character than english ones it doesn't work properly

//Search filter with ListView changes item positions, need exact item IDs for other activity
int itemId = (int) retailerAdapter.getItemId(position);
mRetailerId = mRetailerBeanList.get(itemId).getId();

The issue here is with the line endings. I ran the same code but when I used CRLF line endings, I got the Hash eqaw4I9IoPldjffqieTL/h7z0ejA9zc/fyXt+05KMl4=.

As Jon Skeet mentioned, this is likely because you have autocrlf=true on your Git Repo.

You can either disable this (you may need to re-commit a new version of the jQuery.-3.7.1.min.js file, I am not too sure).

An alternate solution is to force fileContents to use LF line endings. The below code will achieve that :

    var fileContents = TestResources.GetFileContents("MyTests.Resources.jquery-3.7.1.min.js").Replace("\r\n", "\n").Replace("\r", "\n");

This will ensure that fileContents is normalized to use LF Line endings.

I hope this helps, I am new to posting on StackOverflow so just trying to get the hang of it at the moment!

You need to compile with -lm to link the math library.

Please check this, cross apply is not supported in databricks sql

WITH fx_date_new AS ( SELECT CASE WHEN '2025-01-01' > current_date() THEN CAST(date_format(add_months(current_date(), -1), 'yyyyMM') AS INT) 
ELSE CAST(date_format(add_months('2025-01-01', -1), 'yyyyMM') AS INT) 
END AS fxdate ) 
SELECT * FROM fx_date_new 
JOIN (SELECT gold.calcccy(1000, 'USD', 'EUR', fx_date_new.fxdate) as calculatedfunctionvalue) as UDF  

You just need to clear your browser cache.

Check here: https://github.com/domaindrivendev/Swashbuckle.AspNetCore/issues/3329

It seems like you are in the right direction, but missing some small adjustments. Can you retry with the additiona following code in your createTlsConnector method?

AbstractHttp11Protocol<?> protocol = (AbstractHttp11Protocol<?>) connector.getProtocolHandler();
protocol.setSSLEnabled(true);
protocol.addSslHostConfig(sslHostConfig);

I tried same thing with you but i won't work i docker up service and ui with together in the compose file then i change the allure-results and reports localtion in compose file but still does not have any reports file but i can see the allure results in the folder could you explain this?

I am facing the same issue my frontend is in vercel and the backend is hosted on render the issue is due to google chrome's new privacy sandbox which is rolling out gradually. Now , By default chrome doesn't allow third party cookies just like in our case where backend and frontend are running on different domain.

Fixes I have figured out

1. Use a browser other than chrome( in my case my cookies worked fine in brave browser).

2. Go to chrome settings and allow third party cookies.

I am also looking for a better solution than this

No need to wrap select statement in parentheses.

You need to query like this and it will work:

INSERT INTO tableA (uniqueColA, colB, colC)
SELECT uniqueColA, colB, colC 
FROM tableB 
WHERE uniqueColA IN (1,2)

I was facing same situation and after a lot of research I have found best, optimized and professional way to use svg's for huge amount of images. here is the example: Just replace this function with stroke/fill color "currentColor". It will pick parent color or you can add color class. U can do it immediately by using vs code's modern search, filters and shortcut keys.

A possibility is to use this cost function L_a(x) = 1/(1+(a/x)²) which at x=a is 0.5, L_a(a)=0.5. (a is a threshold parameter)

The issue seem to be fixed with the following code line:

cap = pyshark.FileCapture(file, 
                          display_filter=filter,
                          custom_parameters={"--enable-protocol": "someip",
                                             "--enable-heuristic": "someip_udp_heur"})

These additional custom_parameters do the same as if to set in Wireshark the following:

To those like me that want to call using a remote url without a local repo

import git

def _ls_remote_branches(url):
    remote_branches = []
    g = git.cmd.Git()
    for ref in g.ls_remote(url).split("\n"):
        if "head" in ref:
            hash_ref_list = ref.split("\t")
            remote_branches.append(
                hash_ref_list[1].split("/")[-1]
            )
    return remote_branches

Edit 1: other answers did not work for me because I was looking for something that does not require a local git repo.

Edit 2: This was based on the upvoted answer to another question here

The simplest syntax is:

$TheArray=[];

File > Export Specified Packets...

Displayed:

RdfGlance - Fast small desktop application that show rdf data as tables, graphs and node browser.

graph vizalisation

show data as tables

The application is written in rust using egui, it can handle even bigger data set.

Check the docs here: https://docs.redhat.com/en/documentation/openshift_container_platform/4.16/html/scalability_and_performance/what-huge-pages-do-and-how-they-are-consumed#configuring-huge-pages_huge-pages

You have created the tuned object but you are still missing the mcp, something like

apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfigPool
metadata:
  name: worker-hp
  labels:
    worker-hp: ""
spec:
  machineConfigSelector:
    matchExpressions:
      - {key: machineconfiguration.openshift.io/role, operator: In, values: [worker,node-hugepages-1g]}
  nodeSelector:
    matchLabels:
      node-role.kubernetes.io/worker-hp: ""

you can list the mcp with:

oc get mcp 

and see if the changes are applied to the selected nodes

On a side note, this only works for worker nodes, control nodes won't allow custom roles, as you can check if you get the logs for the machine config controler pod

oc logs deployment.apps/machine-config-controller -n openshift-machine-config-operator

[...]
I0321 09:52:19.949950       1 helpers.go:77] Found master node that matches selector for custom pool worker-hp, defaulting to master. This node will not have any custom role configuration as a result. Please review the node to make sure this is intended
I0321 09:52:21.871993       1 helpers.go:77] Found master node that matches selector for custom pool worker-hp, defaulting to master. This node will not have any custom role configuration as a result. Please review the node to make sure this is intended
[...]    

Did you find a solution to this error? I am facing the same, but unable to debug the problem.

Make sure Javac works with a hello world Java program .Create an ant file that compiles a basic hello world Java program. Add plenty system command lines that echo classpaths and paths. Run with verbose. Work your way toward your ant file from there.

For anyone tries to develop react native with expo first time after me:

• Read this doc: https://rnfirebase.io/#expo-managed-workflow (there is a section about "expo-build-properties" and you need to install it)
• After that, if you didn't enable Google sign-in, you will got another error with REVERSE_CLIENT_ID. Follow this page: https://github.com/invertase/react-native-firebase/issues/7338 (remember to add SHA-1 for android too)

I am also from Russia and I have the same problem.
When sending OTP to a Megafon mobile phone, an error occurs: "An internal error has occurred. [Error code:39]"
When sending to an MTS phone, Firebase says that the OTP has been sent, but SMS are not delivered to the phone.
When sending to a Beeline phone, everything works fine: OTP has been sent, delivered, Firebase verification is successful.
Have you found a solution to this problem? What alternative to Firebase can be used in Russia?

Directly embedding a Java Swing JPanel into the UNO-AWT framework of LibreOffice is not supported due to fundamental incompatibilities between the two component models. Exploring alternative integration strategies, such as developing custom UNO components or running the Swing application externally while interfacing with LibreOffice, is recommended to achieve the desired functionality.

While it's possible to place a Swing JPanel into an AWT Panel due to their shared Java foundation, extending this embedding to UNO-AWT is not straightforward. The UNO-AWT framework does not provide mechanisms to host Java Swing components directly.

1. UNO Components: Developing custom UNO components that replicate the desired functionality of your JPanel can be a viable solution. This approach involves creating components that are fully compatible with the UNO-AWT framework, ensuring seamless integration within LibreOffice.

2. External Windows: Launching your Swing-based vocabulary trainer as a separate application that interacts with LibreOffice through UNO services is another alternative. This method maintains a clear separation between the Swing application and the LibreOffice interface, facilitating communication through defined UNO APIs.

I can see that this post is a bit older, but I was curious: what was your move? Did you manage to port your WPF application to the web?

OpenSilver can be a possible solution. OpenSilver (open-source framework) can help port the WPF app to the web and popular mobile platforms. (https://opensilver.net/announcements/3-2/)

Disclaimer: I work in media relations at Userware

I got the same problem with 22.7.0. After downgraded to 20.X, it works perfectly now.

The question is quite old but for future readers that have the same question, I would recommend the package phia. It as a good vignette for code examples.

You just have to import viteProcess from @sveltejs/vite-plugin-svelte.

You can use Ionic to use Vue.js 3 and make it a mobile app . Note: The syntax is different since the Ionic is not just a wrapper.

just slowly match the arguments and you should be fine!

I know this question is very old now, so old that it references an old API from hlrlookup.com that is no longer in use.

The problem is that AI models are still picking up this code as an example of how to use the HLR Lookup API for number validation. Which is wrong as we have totally new API Docs (I'm the COO at HLR Lookup).

I'm hoping that by highlighting this AI won't keep referencing the old code or best case my post will reach someone who can delete the post?

Cheers.

If you are working under Docker, then the command

sail php artisan storage:unlink
sail php artisan storage:link

will solve the problem

It is important from which user you create the link

You must set your sandbox account also into private from within the tiktok app. SELF_ONLY is correct.

For anyone who can help, we were able to find the solution.

The problem occurred because we have a field called 0PRICE.CURRENCY and the command was misinterpreting it.

We added a ` before and after the field name and it solved it.

# Carregar a tabela Delta
delta_table = DeltaTable.forPath(spark, abfss_path_target)

# Construir a condição de correspondência
condicao_correspondencia = " AND ".join([f"t.{chave} = s.{chave}" for chave in chave_unica])

# Usar o comando MERGE para atualizar ou inserir dados
delta_table.alias("t").merge(
    novos_registros.alias("s"),
    condicao_correspondencia  # Usar a condição de correspondência construída
).whenMatchedUpdate(set={f"`{col}`": f"s.`{col}`" for col in lista_campos}
).whenNotMatchedInsert(values={f"`{col}`": f"s.`{col}`" for col in lista_campos}
).execute()

@nx/workspace:run-commands is not an executor but is a generator.

You have to use it in commands like

nx g @nx/workspace:run-commands ...

The executor you want is, probably, nx:run-commands. It is the executor in the target generated by @nx/workspace:run-commands.

I found that you can use the 'fromelf' command (found in Keil_v5\ARM\ARMCLANG(or ARMCC)\bin directory to parse the .axf file (found in the directory containing object files). Options for fromelf command can be found online (specifically for interleaving C with asm you can use --interleave=source with source_path=<path-to-source-directory> and -c flags)

If you don't like the Ctrl + c command, you could just do :

q + Enter

in the terminal.

This will launch the quit command from ng serve

This is a solution, you should to pass a default value in a field and use @extend_schema_field:

...
from drf_spectacular.utils import extend_schema_field

class MessageSerializer(serializers.ModelSerializer):
    ...

    @extend_schema_field(
        field=serializers.DictField(
            default={
        'message_id': 'eab1609b-e356-4b3b-ab4c-b1211ac8957c',
        'body': 'test',
        'file_name': None,
        'user_id': '23eac66e-ff97-423c-97c8-d34bff743355',
        'datetime_create': '2025-03-21T09:22:57.682112Z'
            }
        ),
    )
    def get_last_message(self, chat: Chats) -> Dict[str, Any]:
        ...

If your data can handle being sent to LLMs you can have a look on this solution

If your data can handle being sent to LLMs you can have a look on this solution

If your data can handle being sent to LLMs you can have a look on this solution

anyone succeed to fix that issue?

Not that I know of. If you want that, I'd suggest you raise an issue ticket.

Nobody know the power of LinQ here in C#...

^^

Which One Should You Use?

• ✅ Use Hubs if you need quick and structured real-time communication (e.g., chat, live notifications, collaborative apps).

• ✅ Use Persistent Connection if you require custom message handling or low-level control for better performance.

• https://dcorehost.com/

To create Zone Redundant Azure SQL database(Hyper Scale with 1 replica):

Modify the command to use a valid SKU, such as HS_Gen5_4 or higher (e.g., HS_Gen5_8, HS_Gen5_16).

• Updated Command:

New-AzSqlDatabase -ResourceGroupName "trial" -ServerName "msazserver" -DatabaseName "Database01" -Edition "Hyperscale" -HighAvailabilityReplicaCount 1 -ZoneRedundant -BackupStorageRedundancy Zone -RequestedServiceObjectiveName HS_Gen5_4

Change the server, resource group and database name accordingly.

• Another way to create a Zone Redundant SQL database:

1. Create a New SQL Database
2. In Compute + Storage section, click on Configure Database.

3. Under Service Tier, choose Hyperscale

4. Select Yes to make database zone dedundant with 1 Replica.

Please answer this question. I am also facing this problem........

You need to use Unscoped mode

Association(YourStruct).Unscoped().
Replace(YourStruct.AnotherStruct)

https://gorm.io/docs/associations.html#Delete-Association-Recordenter

Source code

Thanks for sharing! Your example highlights an interesting difference in how MATLAB and Python handle indexing and assignment. In MATLAB, the right-hand side is evaluated first, but the left-hand side must also be valid before assignment happens. That’s why you get the size mismatch error first. If you ever need help understanding MATLAB concepts, www.matlabassignmentexperts.com is a great resource. They helped me with my assignments, especially with Simulink Assignment Help. You might find it useful for tricky indexing issues too!

And what about upgrade of nodejs version under the C:\Program Files\Microsoft Visual Studio\2022\Professional\MSBuild\Microsoft\VisualStudio\NodeJs folder? It is reported by our security tool as a vulnerability and we need to update this nodejs version. Is there a procedure for the upgrade of this package or we can simply substitute it with a regular version of Node.js and npm ?

The answer that @hasan-daghash provided works in most cases. I have a case where I have two charts, one with two paths (colors x+y) and another with a single path (color x).

User can toggle the second path on/off of the first chart. When toggled on, the markers on sole path of the second chart switch color to y.

The svg source still shows that the circle within the marker has still fill color x. I have no idea why this happens. Any help is appreciated.

Thanks n___dv - solution required a bit of additional work

    <outbound>
        <set-body>@($"{((IResponse)context.Variables["response"]).Body.As<JObject>().ToString()}")</set-body>
        <base/>
    </outbound>

The problem was in version incompatibility, if you upgrade Spring Boot to newer version the problem stops occurring.

Thanks here is complate details and the steps to sovle it:

The error occurs because have to moved vitePreprocess from '@sveltejs/kit/vite to @sveltejs/vite-plugin-svelte

You need to update the import statement in this case:

import { vitePreprocess } from '@sveltejs/vite-plugin-svelte'

also check you have installed the packages:

npm install --save-dev @sveltejs/vite-plugin-svelte

• Read the question and happy you found solution.

Maybe now should better use this:

activateDefaultTyping(objectMapper.getPolymorphicTypeValidator(),ObjectMapper.DefaultTyping.NON_FINAL);

Update:

Since Tailwind 4.0 you can simply add

scrollbar-hide

to your class

Broo really thanks to you. I am adding this into my project but i couldn't do it in the correct way thanks a lot broi💖

You can find the ODBC driver for Advantage Database Server 11 at the following link:

http://downloads.chartnettech.com/installs/Misc/

You should download the adsodbc.exe file.

And for Advantage Database Server 12:

https://www.mmorthosoft.de/ads/

You should download the adsodbc.exe file.

Customising the appearance of hosted and embedded Checkout is limited and mostly controlled by the branding settings of the settlement account. It does not support the Appearance API, like Payment Element.

If you want complete control of your checkout UI then I'd recommend looking at using embedded components. This utilises the Checkout Sessions API, but allows you to build your own checkout UI with other components like the Payment Element.