You can find it via Monitor and improve tab > Policy and programs > App content

I just had the same error code, I had mixed up the client certificate and key. Once correctly ordered it worked fine

This is not directly related to VsCode based debugging but it might nudge you in the right direction.
I am using Webstorm to debug and I was facing the same issue there. Then I went to the debugger configuration of my project(Edit configuration page) and saw that the "Ensure breakpoints are detected when loading scripts" was enabled. After disabling it and restarting the debugger it fixed the issue.

Note: on first load of a debugger, it will always show the sources tab when you open the deb tool. After switching to a different tab, the steps I described above fixes the redirection to source tab on each page reload.

My suggestion is that you look for such a configuration in VsCode and check if there is similar setting that is enabled there. The configuration might not be a UI based thing rather might be a JSON file(as most things are in VsCode).

I had a similar problem. I passed a "hex"-argument from python to a c-binary, i.e. 568AD6E4338BD93479C210105CD4198B, like:
subprocess.getoutput("binary.exe 568AD6E4338BD93479C210105CD4198B")

In my binary I wanted the passed argument to be stored in a uint8_t hexarray[16], but instead of char value '5' (raw hex 0x35), I needed actual raw hex value 0x5... and 32 chars make up a 16 sized uint8_t array, thus bit shifting etc..

for (i=0;i<16;i++) {
    if (argv[1][i*2]>0x40)
        hexarray[i] = ((argv[1][i*2] - 0x37) << 4);
    else 
        hexarray[i] = ((argv[1][i*2] - 0x30) << 4);
    if (argv[1][i*2+1]>0x40)
        hexarray[i] = hexarray[i] + (argv[1][i*2+1] - 0x37);
    else 
        hexarray[i] = hexarray[i] + (argv[1][i*2+1] - 0x30);

This would only work for hexstrings with upper chars.

But there must be a better way of doing this?

My website's score is 90; I want to make it 100. How can I do that?

Here is my website: actiontimeusa

1. Navigate to the terminal window within VS Code.

2. Right-click on the word 'Terminal' at the top of the window to access the drop-down menu.

3. Choose 'Panel Position' option, followed by the position of choice ie Top/Right/Left/Bottom.

I'm used to do this:
Query:
SELECT a.ha_code FROM a WHERE ... a.ha_code = any (?)
Parameter as expression:
="{"+join(Parameters!ReportParameter2.Value, ",")+"}"

14 Years later, grafts are deprecated. I there a way to do this without grafts ?

it is possible but you need to use libde265 ( not the default one in ffmpeg)

have a look at the git below

https://github.com/MohitBurkule/pyde265

You can efficiently compute the union of many integer vectors using a hash set (unordered_set in C++ or set in Python) to avoid duplicates while inserting all elements. For large sorted vectors, a priority queue (heap) or a k-way merge algorithm (similar to merge in merge sort) may be faster, especially if duplicates are rare.

There are several reliable approaches to solve this:

1. Database-Level unique constraint

2. Pessimistic locking

3. Optimistic locking with retry logic

4. Message queues

Using the tips recommended by VS code, adding the statement "package Java" before the "import java.util.*" statement seems to have solved the problem

To join (concatenate) two columns in SQL:

In MySQL / PostgreSQL / most SQLs (using || or CONCAT) :

SELECT first_name || ' ' || last_name AS full_name FROM your_table_name;

However, in MySQL specifically, you use CONCAT function:

SELECT CONCAT(first_name, ' ', last_name) AS full_name FROM your_table_name;

Method - Extract the substring starting from the index of "Alert Id", By using the substring function.

enter image description here

1. Taken your given out put in the compose action, and being converted to string with function string(outputs('Compose_Output'))

2. Again, compose action using substring to start from the index of "Alert Id" with function - substring(outputs('Convert_to_String'), outputs('Compose'), 147)

3. Created - Set Variable "Alert Id" as required output : Alert Id*: ```/subscriptions/32476574-bf58-4703-96d9-4378327845/providers/Microsoft.AlertsManagement/alerts/629bd98a-f9b5-c79a-75b1-b807b48d0002```

4. Schema::

{
    "definition": {
        "$schema": "https://schema.management.azure.com/providers/Microsoft.Logic/schemas/2016-06-01/workflowdefinition.json#",
        "contentVersion": "1.0.0.0",
        "triggers": {
            "When_a_HTTP_request_is_received": {
                "type": "Request",
                "kind": "Http"
            }
        },
        "actions": {
            "Compose_OutPut": {
                "runAfter": {
                    "Alert_Id": [
                        "Succeeded"
                    ]
                },
                "type": "Compose",
                "inputs": ":azure: :alert: \n*Non-Prod Alert: RuleCpupercetange*\n*Severity*: Sev4\n*Timestamp*: 2024-10-10T17:55:18.5144302Z \n*Alert Id*: ```/subscriptions/32476574-bf58-4703-96d9-4378327845/providers/Microsoft.AlertsManagement/alerts/629bd98a-f9b5-c79a-75b1-b807b48d0002```\nClick here to find the code \n*****************************************************\n*Affected resource: W008ssaltmost* \n*Resource modified by:[email protected]*\n*****************************************************\n*Select a response:*, with interactive elements"
            },
            "Convert_to_String": {
                "runAfter": {
                    "Compose_OutPut": [
                        "Succeeded"
                    ]
                },
                "type": "Compose",
                "inputs": "@string(outputs('Compose_OutPut'))"
            },
            "Alert_Id": {
                "runAfter": {},
                "type": "InitializeVariable",
                "inputs": {
                    "variables": [
                        {
                            "name": "Alert Id",
                            "type": "string"
                        }
                    ]
                }
            },
            "Set_Variable_Alert_Id": {
                "runAfter": {
                    "Compose_to_set_variable": [
                        "Succeeded"
                    ]
                },
                "type": "SetVariable",
                "inputs": {
                    "name": "Alert Id",
                    "value": "@outputs('Compose_to_set_variable')"
                }
            },
            "Compose": {
                "runAfter": {
                    "Convert_to_String": [
                        "Succeeded"
                    ]
                },
                "type": "Compose",
                "inputs": "@indexOf(outputs('Convert_to_String'), 'Alert Id')\r\n"
            },
            "Compose_to_set_variable": {
                "runAfter": {
                    "Compose": [
                        "Succeeded"
                    ]
                },
                "type": "Compose",
                "inputs": "@substring(outputs('Convert_to_String'), outputs('Compose'), 147)\r\n"
            }
        },
        "outputs": {},
        "parameters": {
            "$connections": {
                "type": "Object",
                "defaultValue": {}
            }
        }
    },
    "parameters": {
        "$connections": {
            "type": "Object",
            "value": {}
        }
    }
}

Solved. The problem was the incomplete naming of the the segments. With more imagination for the solution on my side, it would have been quicker and easier: So, I wrote the same function in an external C file and compiled with the SRC option, that makes assembler code from C - et voilà.

Here is the complete ASM file for a function that rotates an uint32, n (uint8) times, that can be called from RC51 with the C-declaration shown above:

$include (reg51.inc)

NAME    bitops

?PR?_rotr?bitops    SEGMENT     CODE 
?DT?_rotr?bitops    SEGMENT     DATA    OVERLAYABLE

PUBLIC ?_rotr?BYTE  
PUBLIC  _rotr

RSEG        ?DT?_rotr?bitops
    ?_rotr?BYTE:
    n:      DS 1


RSEG ?PR?_rotr?bitops
    USING 0

_rotr PROC

    PUSH    ACC

    mov R3, n

rotr_loop:

    CLR C

    MOV A,R4
    RRC A   
    MOV R4,A    

    MOV A,R5    
    RRC A
    MOV R5,A    

    MOV A,R6    
    RRC A
    MOV R6,A    

    MOV A,R7
    RRC A
    MOV R7,A    

    MOV A,R4
    MOV ACC.7,C
    MOV R4,A    

    djnz R3, rotr_loop


    POP ACC

    RET

ENDP

END

Thanks to all, who supported.

What is your use-case? Are you using Redis for Web Application caching?

Better idea would be to put Redis in path of the API commit and Sync the data to Mongo or Postgres in backend.

I don't quite understand why Redis CDC is used, but I saw that there are relevant implementations on GitHub, which might be useful for reference. The link is:

https://github.com/uuhnaut69/debezium-standalone-server

Dear Ayesha Kiran,

The Hyperparameter tuning need to be put outside the loop, so that each training iteration can be fairly evaluated.

you can see the hyperparameter setting in the training beginning stage on the ref link.

ref: https://scikit-learn.org/stable/modules/cross_validation.html#

Late to the party but for other having the same problem. For me the following worked:

I changed my code from this:

builder.Services.AddAuthentication(JwtBearerDefaults.AuthenticationScheme)
             .AddMicrosoftIdentityWebApi(builder.Configuration.GetSection("AzureAd"));

to this:

// Add services to the container.
builder.Services.AddAuthentication(JwtBearerDefaults.AuthenticationScheme)
    .AddMicrosoftIdentityWebApi(options =>
    {
        builder.Configuration.Bind("AzureAd", options);
        
        // Configure events for SignalR
        options.Events = new JwtBearerEvents
        {
            OnMessageReceived = context =>
            {
                // Check if the request is for SignalR and has a query string token
                if (context.Request.Path.StartsWithSegments("/syncProgressHub") &&
                    context.Request.Query.ContainsKey("access_token"))
                {
                    // Read the access token from the query string
                    context.Token = context.Request.Query["access_token"];
                }
                return Task.CompletedTask;
            }
        };
    }, 
    options => builder.Configuration.Bind("AzureAd", options));

Yes it is posible to remove or change the document headers and/or footers in a PDF document in Adobe Acrobart for those who have a subscription fir the application software but if non of the editing features do not work for you, you can try to lease a profesional document editor and they can easily remove/ edit the header and/or footer

Update:

convert -coalesce -fuzz 10% -transparent "#fb665a" "/home/user/0 1.gif" "/home/user/0 2.gif"
convert -background white -extent 0x0 "/home/user/0 2.gif" "/home/user/0 3.gif"

I've now discovered a way to color the background, but the final IMAGE_2 is still flawed.

There is a problem in IMAGE_1 with the color that should previously be replaced by transparency.

I don't know how the area to be replaced can be expanded so that the similar adjacent color is also captured.

This is most likely because slurmd and other Slurm programs are looking up _slurmctld*.*_tcp without appending a domain name.

The default behavior of the Linux resolver is to treat lookups contains one "." as a FQDN and therefore no domain search is done and the query will fail.

To get around the problem add "options ndots:2" to your /etc/resolv.conf file or even better if you build your own copy of Slurm go to the src/common folder and locate the file slurm_resolv.c where you add res.ndots=2; after the call to res_ninit() and before the call to res_nsearch().

Compile and you will have a perfectly working configless configuration.

You may want to vote this SchedMd BUG report to get the solution into the official distribution.

https://support.schedmd.com/show_bug.cgi?id=11878

Extract page text rects using tool like fitz, check if the same text is up on the top and bottom of all pages using its rect which tells its position on the page, if repeats over many pages, u got ur header and footer, can employ regex as well for more accurate extraction.

I had the same issue with Tortoise and resolved it using Ignore Ancestry

android:focusable="false" in layout for an EditText field worked for me when the datepicker was attached to an onclicklistener on an EditText Field...

Hope helpful you!

Step 1 - close the project

Step 2 - close Android Studio IDE

Step 3 - delete the .idea directory

Step 4 - delete all .iml files

Step 5 - open Android Studio IDE and import the project

post_install do |installer|
    installer.pods_project.targets.each do |target|
        target.build_configurations.each do |config|
            config.build_settings['ONLY_ACTIVE_ARCH'] = 'NO'endendend

I got above answer from below solution

Finally I discovered the issue.

In Pods project or in every pod build config you can see that Cocoapods is forcing the "debug" Build active architecture only property to YES.

'Build active architecture only = YES'
Changing it manually to NO in every pod, did the trick, but that is not a good way to solve it.

You must go to your podfile and add this in the bottom part:

post_install do |installer|
    installer.pods_project.targets.each do |target|
        target.build_configurations.each do |config|
            config.build_settings['ONLY_ACTIVE_ARCH'] = 'NO'
        end
    end
end
That will force NO to every pod in Build active architecture only and the project will start compiling in your M1 mac.

Stuck with the same problem in a Visual Studio project with CMakePresets.json when I cook it using the example from MSDN: https://learn.microsoft.com/en-us/cpp/build/cmake-presets-vs

I set "CMAKE_BUILD_TYPE": "Release" in json, but Visual Studio still generates debug builds in this preset (there is no way to additionally set build types inside a preset in GUI):

The reason is still the same: CMAKE_CONFIGURATION_TYPES with several default values ​​and "Debug" as the first option to be used.

So the solution might be to set only one corresponding CMAKE_CONFIGURATION_TYPES value inside CMakePresets.json:

      "cacheVariables": {
        "CMAKE_BUILD_TYPE": "Release",
        "CMAKE_CONFIGURATION_TYPES": "Release"
      }

I have created a VB.NET application that generates a Carousel Image Slider HTML webpage on which the images when clicked will execute standard desktop shortcuts. It is available at http://www.mv-w.net/BallyOak/SliderPlus/index.html If anyone is interested in how I did it they can contact me.

No PHP or js needed except for the interface. Just VB.

Access token expires after 1 hour. The refresh token is what expires after 14 days

.NET 9

internal static string Sha1(string path)
{
    using var stream = File.OpenRead(path);
    using var sha1 = System.Security.Cryptography.SHA1.Create();
    return Convert.ToHexStringLower(sha1.ComputeHash(stream));
}

Because at @106.0.2 , executablePath was not a function, it was a getter that returns a promise.

https://github.com/Sparticuz/chromium/blob/50adb2c3d61014b8f97b19d35a1feedb2ff2bfb7/source/index.ts#L182

You can either use several pre-existing AI agents or easily make one in platforms like N8N that can easily do this job. You can find a nice tutorial here to help you auto-Publish YouTube Videos to Facebook & Instagram.

I'm facing the same problem, but unable to solve it. Using spring boot 3.4.5, r2dbc-postgresql 1.0.7. My query looks like:

               select test.id,
                      test.name,
                      test.description,
                      test.active,                     
                      count(q.id) as questions_count
               from test_entity test
                        left join test_question q on q.test_entity_id = test.id
               group by test.id, test.name, test.description, test.active

I tried many variants of spelling questions_count, but always get null.

I even tried to wrap this query into

select mm.* (
       ...
       ) mm

But that doesn't help.

I'm using R2dbcRepository with @Query annotation, and interface for retrieving result set.

Thanks for the hints. The tast seem to be not fully automatable, so I created a guide for the IfU.

As it may be of use for someone reading this post, I post it here:

Secure Configuration of the Firebird Database Service

To improve system security and minimize potential vulnerabilities, it is strongly recommended that the Firebird database service does not run under the Local System account or any user account with elevated privileges.

Instead, use the provided Firebird tool instsvc.exe to install the service under a dedicated low-privilege user account:

1. Create a Dedicated Local User Account

1. Press Win + R, type compmgmt.msc, and press Enter to open Computer Management.

2. Navigate to System Tools → Local Users and Groups → Users.

3. Right-click on Users and select New User….

4. Create a new account (e.g., firebird_svc) with the following settings:

• Set a strong password (in this example "YourSecurePassword")

• Disable "User has to change password ..."

• Enable “User cannot change password” and “Password never expires”.

• Do not add the user to the Administrators group.

5. Click Create, then Close.

2. Remove the service user from the login screen

1. Open secpol.msc

2. Go to Local Policies → User Rights Assignment

3. Find Deny log on locally

4. Add the firebird_svc user

3. Install the Firebird Service Using instsvc.exe

1. Open a Command Prompt with Administrator rights.

2. Navigate to the Firebird installation directory (e.g., C:\Program Files\Firebird\Firebird_4_0).

3. Run the following commands to install the service under the dedicated user:

instsvc stop
instsvc remove
instsvc install -l firebird_svc YourSecurePassword
instsvc start

4.       Right-click the Firebird installation directory (e.g., C:\Program Files\Firebird\Firebird_4_0), select Properties, then navigate to the Security tab. Ensure that the firebird_svc account is listed and has Full Control permissions assigned. If the account is not listed, add it and assign the appropriate rights.

The Firebird server now runs under a dedicated user account with limited system permissions, significantly enhancing the overall security of the system by reducing the risk of privilege escalation.

4. Securing the Firebird Database File

Additionally, access to the database file (YourApplicationsDatabaseFile.fdb) can be restricted to the Firebird service account and system administrators only. This prevents unauthorized users from reading or modifying the file and supports secure system operation.
1. Open Command Prompt as Administrator
2. Navigate to PathWhereYourDbFileIsLocated
cd \ProgramData\MyDbPRogram
3. Remove Inherited Permissions
icacls "YourApplicationsDatabaseFile.fdb" /inheritance:r
4. Grant Access to Firebird Service User
icacls "YourApplicationsDatabaseFile.fdb" /grant firebird_svc:(M)
5. Grant Full Control to Administrators
icacls "YourApplicationsDatabaseFile.fdb" /grant *S-1-5-32-544:(OI)(CI)(F)

Are you using flutter_native_splash? As far as I can see, you can't disable this first splash (at least not on the Flutter side), because the native app loads Flutter here. But you can adjust the color of the native splash so that the transition to your own splash isn't quite as harsh.

If you use this code, that error still occurred?

export type EnvironmentTypes {
   Development: string,
   Production: string,
   Test: string,
}

export const Environment: EnvironmentTypes {
   Development: 'development',
   Production: 'production',
   Test: 'test',
}

// MainActivity.java package com.ashish.bdgfakehacksim;

import android.app.AlertDialog; import android.content.Intent; import android.os.Bundle; import android.os.Handler; import android.text.InputType; import android.widget.EditText; import android.widget.TextView; import android.widget.Button; import androidx.appcompat.app.AppCompatActivity;

public class MainActivity extends AppCompatActivity {

private static final String CORRECT_PASSWORD = "Ashish440";

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);

    EditText passwordInput = new EditText(this);
    passwordInput.setInputType(InputType.TYPE_CLASS_TEXT | InputType.TYPE_TEXT_VARIATION_PASSWORD);

    new AlertDialog.Builder(this)
        .setTitle("Enter Password")
        .setView(passwordInput)
        .setCancelable(false)
        .setPositiveButton("Enter", (dialog, which) -> {
            String input = passwordInput.getText().toString();
            if (input.equals(CORRECT_PASSWORD)) {
                startActivity(new Intent(this, LoadingActivity.class));
                finish();
            } else {
                finish();
            }
        })
        .show();
}

}

// LoadingActivity.java package com.ashish.bdgfakehacksim;

import android.content.Intent; import android.os.Bundle; import android.os.Handler; import android.widget.TextView; import androidx.appcompat.app.AppCompatActivity;

public class LoadingActivity extends AppCompatActivity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); TextView textView = new TextView(this); textView.setText("Loading BDG Hack Engine..."); textView.setTextSize(24); setContentView(textView);

    new Handler().postDelayed(() -> {
        startActivity(new Intent(this, ResultActivity.class));
        finish();
    }, 3000);
}

}

// ResultActivity.java package com.ashish.bdgfakehacksim;

import android.os.Bundle; import android.widget.TextView; import androidx.appcompat.app.AppCompatActivity; import java.util.Random;

public class ResultActivity extends AppCompatActivity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); TextView resultText = new TextView(this); resultText.setTextSize(24);

    boolean success = new Random().nextBoolean();
    if (success) {
        resultText.setText("✅ BDG Hack Successful! Points Added: +9999");
    } else {
        resultText.setText("❌ BDG Hack Failed. Try Again Later.");
    }

    setContentView(resultText);
}

}

I got the same problem of same IP address assigned to both the nodes. My cluster was setup through KinD (Kubernetes in Docker).

If this is the same case as yours, you only need to stop the container of each node and start those containers again. You might see distinct IP addresses assigned to both the nodes.

PS: One of my peer did this on my KinD cluster.

Solution in Vanilla JS that works with any (!?) locale

I'm having the same problem in 2025, but I need a solution that works without an external library. As my problem is related to <input type="date" /> (see my update of https://stackoverflow.com/a/79654183/15910996) and people use my webpage in different countries, I also need a solution that works automatically with the current user's locale.

My idea is to take advantage of new Date().toLocaleDateString() always being able to do the right thing but in the wrong direction. If I take a static ISO-date (e.g. "2021-02-01") I can easily ask JavaScript how this date is formatted locally, right now. To construct the right ISO-date from any local date, I only need to understand in which order month, year and date are used. I will find the positions by looking at the formatted string from the static date.

Luckily, we don't have to care about leeding zeros and the kind of separators that are used in the locale date-strings.

With my solution, on an Australian computer, you can do the following:

alert(new Date(parseLocaleDateString("21/11/1968")));

In the US it will look and work the same like this, depending on the user's locale:

alert(new Date(parseLocaleDateString("11/21/1968")));

Please note: My sandbox-example starts with an ISO-date, because I don't know which locale the current user has... 😉

// easy:
const localeDate = new Date("1968-11-21").toLocaleDateString();

// hard:
const isoDate = parseLocaleDateString(localeDate);

console.log("locale:", localeDate);
console.log("ISO:   ", isoDate);

function parseLocaleDateString(value) {
  // e.g. value = "21/11/1968"
  if (!value) {
    return "";
  }

  const valueParts = value.split(/\D/).map(s => parseInt(s)); // e.g. [21, 11, 1968]
  if (valueParts.length !== 3) {
    return "";
  }

  const staticDate = new Date(2021, 1, 1).toLocaleDateString(); // e.g. "01/02/2021"
  const staticParts = staticDate.split(/\D/).map(s => parseInt(s)); // e.g. [1, 2, 2021]

  const year = String(valueParts[staticParts.indexOf(2021)]); // e.g. "1968"
  const month = String(valueParts[staticParts.indexOf(2)]); // e.g. "11"
  const day = String(valueParts[staticParts.indexOf(1)]); // e.g. "21"

  return [year.padStart(4, "0"), month.padStart(2, "0"), day.padStart(2, "0")].join("-");
}

Update / clarification: I realized my original post listed the wrong versions.
I’m actually on Spring Boot 3.5.3 with Java 21.
For reference, here’s the relevant part of my build.gradle

plugins {
    id 'java'
    id 'org.springframework.boot' version '3.5.3'
    id 'io.spring.dependency-management' version '1.1.7'
}

java {
    toolchain {
        languageVersion = JavaLanguageVersion.of(21)
    }
}

The rest of the question remains the same—just wanted to correct the environment details.

To increase playback speed without changing pitch, use:

await sound.setRateAsync(2.0, true, Audio.PitchCorrectionQuality.High);

Workaround: Delete the XIB/Storyboard files that caused compile error and build the project again without cleaning the build folder. If another XIB/Storyboard file fails, delete it as well and repeat the process until the compilation is successful. Afterward, you can restore the deleted XIB/Storyboard files (using Git to discard the changes) and build the project again.

If a function or variable has SSN then fortify treat it as privacy violation because fortify treat it as related to SocialSecurityNumer(ssn). If you change SSN to some other text the error will vanish

If you really want to prevent drift at all you should start using deployment stacks. Using stacks you will be able to prevent any changes happening outside of the deployment stack. Currently what-if is not very reliable as it produces what-if noise on many of the resources. From the Bicep community calls we have learned that improvement to what-if is planned but that improvement will be only when using deployment stacks. So even if you do not use the deny option of deployment stacks I will suggest to start using it now as when the what-if improvements are introduced you will be ready to take advantage of it. You can still do what-if validation now but overall you will have to review the changes somehow manually due to the amount of noise. For example, you can have pipelines with two stages. One stage runs only what-if. You validate the results. Based on the validation you decide to run the second stage where the actual deployment will be done.

expo-av is declared as Deprecated. Please use the coresponding expo-audio or expo-video:
"Deprecated: The Video and Audio APIs from expo-av have now been deprecated and replaced by improved versions in expo-video and expo-audio"

My specific want has been resolved by this PR https://github.com/apache/airflow/pull/46535!

thank you for your response. Before I saw that someone had answered my question, I tried using the options and it worked.

In my controller

And in my form:

grunge-style analog photos around 2025.i was taking pictures in front of a Nissan GT 86 car together. where London England, was sitting with a pose model style turned toward the kamera wearing a black t outfit Jens and nike air Jordan low shoes, using flash

The parsing error was caused because the code presents each 2D tensor as a single byte string using tf.io.serialize_tensor, but the parsing schema was set to expect a fixed-length array of strings. To fix this, change the FixedLenFeature to expect a single scalar string, which will then be correctly decoded by tf.io.parse_tensor. Kindly refer to the gist for working code.

The TypeError in BroadcastTo.call() was caused by the Masking layer (applied to jet_masked = keras.layers.Masking(mask_value=0.0)(jet_input)). This layer created a boolean mask (shape (None, 3, 2)) that interfered with downstream layers like LSTM. To fix this, remove the Masking layer and instead pass a custom jet_mask tensor directly to your LSTM's mask argument. This approach prevents automatic masking while still allowing jet_input to be concatenated with other inputs. Please refer to this gist.

thats too unity, they;ve moved that Layout option to a tiny icon in the toolbar of scene view..

As I accidently hit it my project are invisible with UI anymore, took me 1 hr to find out

enter image description here

1. Initialize your / JSON Object given

2. Parse JSON - Converting JSON Object in to structured data object to easy manipulate for programming.

3. Compose action to get out put required:

   {
     "email": "[email protected]",
     "first name": "Donald",
     "last name": "Duck"
   }
   

4. Schema for reference:

   {
       "definition": {
           "$schema": "https://schema.management.azure.com/providers/Microsoft.Logic/schemas/2016-06-01/workflowdefinition.json#",
           "contentVersion": "1.0.0.0",
           "triggers": {
               "When_a_HTTP_request_is_received": {
                   "type": "Request",
                   "kind": "Http"
               }
           },
           "actions": {
               "Parse_JSON": {
                   "runAfter": {
                       "Initialize_JSON_Object": [
                           "Succeeded"
                       ]
                   },
                   "type": "ParseJson",
                   "inputs": {
                       "content": "@variables('JSON Object')",
                       "schema": {
                           "type": "object",
                           "properties": {
                               "email": {
                                   "type": "string"
                               },
                               "phone number": {
                                   "type": "string"
                               },
                               "fields": {
                                   "type": "array",
                                   "items": {
                                       "type": "object",
                                       "properties": {
                                           "description": {
                                               "type": "string"
                                           },
                                           "value": {
                                               "type": "string"
                                           },
                                           "id": {
                                               "type": "integer"
                                           }
                                       },
                                       "required": [
                                           "description",
                                           "value",
                                           "id"
                                       ]
                                   }
                               }
                           }
                       }
                   }
               },
               "Initialize_JSON_Object": {
                   "runAfter": {},
                   "type": "InitializeVariable",
                   "inputs": {
                       "variables": [
                           {
                               "name": "JSON Object",
                               "type": "object",
                               "value": {
                                   "email": "[email protected]",
                                   "phone number": "+123 321 111 333",
                                   "fields": [
                                       {
                                           "description": "name",
                                           "value": "Mickey",
                                           "id": 1
                                       },
                                       {
                                           "description": "first name",
                                           "value": "Donald",
                                           "id": 1
                                       },
                                       {
                                           "description": "last name",
                                           "value": "Duck",
                                           "id": 3
                                       },
                                       {
                                           "description": "age",
                                           "value": "1",
                                           "id": 4
                                       }
                                   ]
                               }
                           }
                       ]
                   }
               },
               "Compose": {
                   "runAfter": {
                       "Parse_JSON": [
                           "Succeeded"
                       ]
                   },
                   "type": "Compose",
                   "inputs": {
                       "email": "@{body('Parse_JSON')?['email']}",
                       "@{body('Parse_JSON')?['fields'][1]['description']}": "@{body('Parse_JSON')?['fields'][1]['value']}",
                       "@{body('Parse_JSON')?['fields'][2]['description']}": "@{body('Parse_JSON')?['fields'][2]['value']}"
                   }
               }
           },
           "outputs": {},
           "parameters": {
               "$connections": {
                   "type": "Object",
                   "defaultValue": {}
               }
           }
       },
       "parameters": {
           "$connections": {
               "type": "Object",
               "value": {}
           }
       }
   }
   

Singed up stackoverflow now to say thnak you! had the same issue and now I know why :)

God bless

In the end it seemed that the deduplication using materialized view was the most performant approach because the ingestion latency was starting to get really high using a custom deduplication mechanism without materialized views. The only option was to upscale the SKU but that itself also has a great impact on cost.

However, deduplication using the materialized view approach also comes with a certain load on the ingestion process when working with billions of rows.

A classic approach for your case would be using one database (e.g. PostgreSQL) and two tables: one of match data and another for match summary. Such database is supported by practically any programming language and you'll se a lot of examples how to insert the data, so you won't even need to write a CSV file and JSON file but write the data directly into the database. But if you just have files, reading and inserting into the database is also simple, e.g. if you want to insert CSV look at this anwer: How to import CSV file data into a PostgreSQL table

Inserting JSON is a little less trivial, but still not very hard: How can I import a JSON file into PostgreSQL?

But definitely just one database and two tables, no need to run two database servers just to contain two tables.

<select name="cars" id="cars">
  <option value="volvo">Volvo</option>
  <option value="saab">Saab</option>
  <option value="mercedes">Mercedes</option>
  <option value="audi">Audi</option>
</select>

const $select = document.querySelector('#cars');

for (let i = 0; i < $select.options.length; i++) {
  const option = $select.options[i];
  console.log(`index: ${i}, value: ${option.value}, text: ${option.text}`);
}

Is this what you want?

If you want to visualize the server-side rendered version versus regular version - https://www.crawlably.com/ssr-checker/

Disclaimer - I created this tool for the non-devs on our team to check SSR issues.

In reference to: The code stops on the line: "qdf.Parameters(Parm1) = intVdrProfileID". I get "Item not found in this collection"....

Parm1 needs to be a string variable which is the name of the parameter. Dim Parm1 as string and set it to the name of the parameter.

When upgrading to SpringBoot 3, Tomcat 10 or anything that requires Jakarta EE 9, it’s always safer to replace all javax dependencies with jakarta ones. It’s not completely straightforward .

this earlier works without any security settings with hibernate jar with springboot version below 3.. but after springboot3 we compiled to security related settings to jdbc connection url in application.xml file and also remove hibernate jar dependency in pom.

.url=jdbc:sqlserver://<connection-ip:port>;databaseName=<Dbname>;encrypt=true;trustServerCertificate=true;

Did you ever implement this? I'm after the same thing and I'm about to resort to just using a FileSystemWatcher.

Springboot3 comes with it own jakarta jar dependency. Hibernate 5 not compatible with it, As it brings javax jar. So please upgrade your Sprinboot version and remove hibernate dependency. Your application will work perfectly and querydsl dependency also get the work around.

This is very common due to vscode copilot incorrectly predicting the new control flow syntax.

TLDR: make sure @ is added prior to the flow keyword, in my case, the else keyword

Hola no se si aún te sirva la solución, pero de igual manera estaba teniendo este error en mi servidor Hostinger, es un cambio muy pequeño pero clave.

Descripción del Problema

Al subir una aplicación Laravel/Filament a un hosting en la nube, las imágenes cargadas a través de la sección de administración no se muestran en el frontend. En su lugar, aparece un icono de imagen rota. Al revisar los logs de Nginx, el error específico que se presenta es: failed (40: Too many levels of symbolic links).

Esto indica que el servidor web (Nginx) no puede acceder a las imágenes porque el enlace simbólico public/storage que apunta a la ubicación real de los archivos (usualmente storage/app/public) está configurado incorrectamente o sufre de un problema de permisos que el sistema interpreta como un bucle o una cadena excesiva de enlaces.

Causas Identificadas

1.- Enlace Simbólico (public/storage) con propietario incorrecto (root:root): Aunque el destino del enlace (storage/app/public) tuviera los permisos correctos, el propio archivo del enlace simbólico era propiedad de root, mientras que Nginx se ejecuta con un usuario diferente (www-data). Esto puede causar que Nginx no "confíe" en el enlace o lo interprete erróneamente.

2.- Posible creación incorrecta o bucle en el enlace simbólico: Aunque menos probable una vez que se verifica la ruta de destino, un enlace simbólico que apunta a sí mismo o a un enlace anidado puede generar este error.

Solución Paso a Paso

La solución se centra en eliminar cualquier enlace simbólico public/storage existente, y luego recrearlo asegurándose de que el propietario sea el usuario del servidor web (www-data en la mayoría de los casos de Nginx en Ubuntu/Debian).

1.- Eliminar el Enlace Simbólico Problemático

Primero, elimina el enlace simbólico public/storage existente. Esto no borrará tus imágenes, ya que el enlace es solo un "acceso directo".

# Navega al directorio 'public' de tu proyecto Laravel
cd /var/www/nombre_proyecto/public

# Elimina el enlace simbólico 'storage'
rm storage

2. Recrear el Enlace Simbólico con el Propietario Correcto

La forma más efectiva es intentar crear el enlace simbólico directamente con el usuario del servidor web.

# Navega a la raíz de tu proyecto Laravel
cd /var/www/nombre_tu_proyecto/

# Ejecuta el comando storage:link como el usuario del servidor web
# Sustituye 'www-data' si tu usuario de Nginx es otro (ej. 'nginx')
sudo -u www-data php artisan storage:link

Si el comando sudo -u www-data php artisan storage:link falla o te da un error, puedes ejecutar php artisan storage:link (que lo creará como root) y luego usar el siguiente comando para cambiar su propiedad:

# Navega al directorio 'public' de tu proyecto
cd /var/www/nombre_tu_proyecto/public

# Cambia la propiedad del enlace simbólico *directamente* (con -h o --no-dereference)
# Sustituye 'www-data' si tu usuario de Nginx es otro
sudo chown -h www-data:www-data storage

3. Verificar la Propiedad del Enlace Simbólico

Es crucial verificar que el paso anterior haya funcionado y que el enlace simbólico storage ahora sea propiedad de tu usuario de servidor web.

# Desde /var/www/nombre_de_tu_proyecto/public
ls -l storage

La salida debería ser similar a esta (observa www-data www-data como propietario):

lrwxrwxrwx 1 www-data www-data 35 Jul 3 03:27 storage -> /var/www/nombre_de_tu_proyecto/storage/app/public

4. Limpiar Cachés de Laravel

Para asegurar que Laravel no esté sirviendo URLs de imágenes desactualizadas o incorrectas debido a la caché, límpialas.

# Desde la raíz de tu proyecto Laravel
php artisan config:clear
php artisan cache:clear
php artisan view:clear

5. Reiniciar Nginx

Para asegurar que Laravel no esté sirviendo URLs de imágenes desactualizadas o incorrectas debido a la caché, límpialas.

sudo systemctl reload nginx

De esta forma logre solucionar mi problema, en sí los puntos importantes que hay que tener en cuenta al levantar una página web en un hostinger o servidor, son los permisos de usuarios y que usuarios estan creando los archivos y dando acceso, en este caso es importante que www-data tenga acceso a estos archivos y carpetas porque es el usuario que usa Nginx para adiministrar los archivos del proyecto y servirlos, espero te ayude o ayude a otras personas con este problema 🙌.

The tokio-run-until-stalled crate (https://crates.io/crates/tokio-run-until-stalled) is specifically designed to address this need—it provides a way to run a Tokio runtime until all pending tasks have completed (i.e., "stalled" state, where no more progress can be made).

The problem I had was this line.

return array(true, $idp_sso_url . '?SAMLRequest=' . base64_encode(gzdeflate($authnRequest)));

The $idp_sso_url from Google already had a parameter in the URL, so my use of "?SAMLRequest=..." needed to be "&SAMLRequest=..."

About the first problem, my guess is that The LLM uses DOM structure and visual hints to infer which element matches your instruction. So when visually adjacent elements (like icons or spans inside buttons) are rendered, the LLM picks the wrong node, especially if accessibility labels or semantic tags are missing.

The link is broken for me as well. I would suggest reached out to Stripe support (https://support.stripe.com/) about this.

Thank you Sam! Good news! Here is the result of headerData.

totalRowsCount 95

headerData {...} jsonTableCopy JSON
author: "Bob Hoskins"
_id: "9e570df9-6ea9-4760-98f1-0df76084e857"
_owner: "76001129-23f0-41da-9f3c-15b9bd2fe0e9"
_createdDate: "Wed Jun 25 2025 13:40:16 GMT+0530 (India Standard Time)"
_updatedDate: "Wed Jun 25 2025 13:40:16 GMT+0530 (India Standard Time)"
bookCopies: 1
available: true
title: "All They Want Is The Truth"
bookOwner: "BICF"

numberOfColumns 9

bookTableHeaders Array(9) jsonTableCopy JSON
0: "author"
1: "_id"
2: "_owner"
3: "_createdDate"
4: "_updatedDate"
5: "bookCopies"
6: "available"
7: "title"
8: "bookOwner"

Also...Some columns are empty like you pointed out. Here's a screenshot of my wix data table:

So I entered "NA" in some columns. That helped. Here's the result after that:

totalRowsCount 95

headerData {...} jsonTableCopy JSON
author: "Bob Hoskins"
borrowedBy: "NA"
_id: "9e570df9-6ea9-4760-98f1-0df76084e857"
_owner: "76001129-23f0-41da-9f3c-15b9bd2fe0e9"
_createdDate: "Wed Jun 25 2025 13:40:16 GMT+0530 (India Standard Time)"
_updatedDate: "Thu Jul 03 2025 08:44:49 GMT+0530 (India Standard Time)"
requestedBy: "NA"
bookCopies: 1
available: true
title: "All They Want Is The Truth"
bookOwner: "BICF"

numberOfColumns 11

bookTableHeaders Array(11) jsonTableCopy JSON
0: "author"
1: "borrowedBy"
2: "_id"
3: "_owner"
4: "_createdDate"
5: "_updatedDate"
6: "requestedBy"
7: "bookCopies"
8: "available"
9: "title"
10: "bookOwner"

So now the non empty columns are showing up. Thank you for your help! However 3 columns "available", "requestBook", "approve", were set as boolean. I was assuming, that leaving it empty would be taken as false. If therse are not showing up because they are empty, what should I do? Should I change these booleans to number columns and then write some code to make it look like Yes, No & NA on the page's table?

I looked at javascript way back in the year 2000! After that I became a sculptor! I may make some dumb mistakes here and there! Once again, thanks a lot Sam! May God bless you!

I have similar error in ionic , I notice that the HttpEventType was not correct in the import.

The correct is:

import { HttpEventType } from '@angular/common/http';

Thanks for the guide. How to deploy to https://dockerhosting.ru/

how about using the FakeLogger?
https://learn.microsoft.com/en-nz/dotnet/api/microsoft.extensions.logging.testing.fakelogger
https://devblogs.microsoft.com/dotnet/fake-it-til-you-make-it-to-production/

using Microsoft.Extensions.Logging.Testing;

public class Tests
{
    private readonly FakeLogger<GetImageByPropertyCode> _fakeLogger = new();

    [Fact]
    public void Test()
    {
        _fakeLogger.Collector
            .GetSnapshot()
            .Count(l => l.Message.StartsWith("whatevs"))
            .Should().Be(1);
    }

Since July 2025, GitHub actions stopped supporting windows-2019 runner, so I encountered the same problem. I found a solution from Open .net framework 4.5 project in VS 2022. Is there any workaround?

The key steps are as follows:

1. Download .net framework 4.5 SDK from NuGet.org
2. Unzip and move .net framework 4.5 SDK to C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework

GitHub action example:

name: test

on:
  workflow_dispatch:
  push:
    branches: ['main']

jobs:
  build:
    env:
      projName: net45action
      buildCfg: Release
      net45SdkUrl: 'https://www.nuget.org/api/v2/package/Microsoft.NETFramework.ReferenceAssemblies.net45/1.0.3'
      sdkSystemPath: 'C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework'

    runs-on: windows-2025

    steps:
      - name: Install .net framework 4.5 SDK
        shell: pwsh
        run: |
          echo "download ${env:net45SdkUrl}"
          Invoke-WebRequest -Uri "${env:net45SdkUrl}" -OutFile "net45sdk.zip"
          echo "unzip net45sdk.zip"
          Expand-Archive -Force -LiteralPath "net45sdk.zip" -DestinationPath "net45sdk"
          echo "move to ${env:sdkSystemPath}"
          Move-Item -Force -LiteralPath "net45sdk\build\.NETFramework\v4.5" -Destination "${env:sdkSystemPath}"

      - name: Checkout
        uses: actions/checkout@v4
        with:
          fetch-depth: 0

      - name: Add msbuild to PATH
        uses: microsoft/setup-msbuild@v2

      - name: Setup VSTest Path
        uses: darenm/[email protected]

      - name: Restore packages
        run: nuget restore ${env:projName}.sln

      - name: Build
        run: msbuild ${env:projName}.sln -p:Configuration=${env:buildCfg}

      - name: Run unit tests
        run: vstest.console.exe "${{ env.projName}}.test\bin\${{ env.buildCfg }}\${{ env.projName}}.test.dll"
        

Here is an example project:
https://github.com/vrnobody/net45action

I don't see an error here other than a statement reversal about the training dataset while predicting the model Training model.

In the below statement trainTgt had been sent to mask the source data to train. It doesn't ideally matter since you are only considering the output predictions for your reference. Do you have any error message to display to understand more about the issue?

tgt_padding_mask = generate_padding_mask(trainTgt, tokenizer.vocab['[PAD]']).cuda()
        model.train()
        
    trainPred: torch.Tensor = model(trainSrc, trainTgt, tgt_mask, tgt_padding_mask)                      

Thanks,

Ramakoti Reddy.

What I found gave me the desired effect was porting my basic operations to RTK Query.

From a thunk, when RTK query actions are dispatched, they can be awaited and there result is returned. For example:

export const createAndNameThing = createAsyncThunk(
  'things/createAndName',
  async (name: string, { dispatch }) => {
    // Step 1: Create the thing
    const createResult = await dispatch(
      thingApi.endpoints.createThing.initiate(undefined)
    ).unwrap();

    // Step 2: Update the thing with the name
    const updateResult = await dispatch(
      thingApi.endpoints.updateThing.initiate({
        id: createResult.id,
        data: name
      })
    ).unwrap();

    return updateResult;
  }
);

import React, { useEffect, useState } from "react";

const Materias_List = () => {
  const [originalData, setOriginalData] = useState([]);
  const [dataApi, setDataApi] = useState([]);

  const [estadoChecked, setEstadoChecked] = useState({
    materia_promocionada: false,
    materia_pendiente: false,
    materia_cursando: false,
    materia_tiene_apuntes: false,
  });

  const fetchData = async () => {
    try {
      // Simulated fetch (replace with real fetch if needed)
      const response = await fetch("/path/to/your/degree_in_software_development.json");
      const json = await response.json();
      setOriginalData(json.subjects);
      setDataApi(json.subjects);
    } catch (e) {
      console.error("Error al consumir API", e);
    }
  };

  const handleOnChange = (e) => {
    const { name, checked } = e.target;
    setEstadoChecked((prev) => ({
      ...prev,
      [name]: checked,
    }));
  };

  useEffect(() => {
    fetchData();
  }, []);

  // Apply filters every time estadoChecked changes
  useEffect(() => {
    let filtered = [...originalData];

    const filters = [];

    if (estadoChecked.materia_promocionada) filters.push("Promocionada");
    if (estadoChecked.materia_pendiente) filters.push("Pendiente");
    if (estadoChecked.materia_cursando) filters.push("Cursando");

    // Filter by estado (Promocionada, Pendiente, Cursando)
    if (filters.length > 0) {
      filtered = filtered.filter((s) => filters.includes(s.estado));
    }

    // Filter by tiene_apuntes
    if (estadoChecked.materia_tiene_apuntes) {
      filtered = filtered.filter((s) => s.tiene_apuntes);
    }

    setDataApi(filtered);
  }, [estadoChecked, originalData]);

  return (
    <>
      <div>
        <p>Filtrar por: </p>
        <label>
          <input
            type="checkbox"
            name="materia_promocionada"
            onChange={handleOnChange}
          />
          Promocionada
        </label>
        <label>
          <input
            type="checkbox"
            name="materia_pendiente"
            onChange={handleOnChange}
          />
          Pendiente
        </label>
        <label>
          <input
            type="checkbox"
            name="materia_cursando"
            onChange={handleOnChange}
          />
          Cursando
        </label>
        <label>
          <input
            type="checkbox"
            name="materia_tiene_apuntes"
            onChange={handleOnChange}
          />
          Tiene apuntes
        </label>
      </div>

      <div id="materias_container">
        <ul id="materias_lista">
          {dataApi.map((subject) => (
            <li key={subject.codigo}>
              <div className="materias__item">
                <span className={`estado_${subject.estado.toLowerCase()}`}>
                  {subject.estado}
                </span>
                <h4>{subject.nombre}</h4>
                <p className="materias__item-detalle">
                  <span>Código: {subject.codigo}</span>
                  {subject.tiene_apuntes && subject.link_apuntes && (
                    <span>
                      <a href={`/${subject.link_apuntes}`} target="_blank">
                        📚 Apuntes
                      </a>
                    </span>
                  )}
                </p>
              </div>
            </li>
          ))}
        </ul>
      </div>
    </>
  );
};

export default Materias_List;

Is there any solution to this problem, I'm also having the same problem. Dependency conflicts aries only when the Supabase imports are included else everything is fine. What to do

In PowerShell, where python did no produce a results because my installation did not add its path to Path, the environment variable. (Get-Command python).Path worked

Great! This bot is exactly what you need. It can check whether a number is registered on Telegram. You can try it out here: https://t.me/nihaoiybot. My Telegram contact is @xm88918 if you need further assistance.

Rebuild the cache again

yarn cache clean
yarn install

The workaround described in this comment in an Avalonia Github Issue worked for me.

You still get the extra seven columns but you can remove them from the DataGrid at the end of the handler method as a last step.

Not a perfect solution, but might work for some.

Found a solution that worked for me.

1. You need to copy your .ipa files to your mac

2. Unzip the ipa

3. Re-sign the extension app with freshly written entitlements.plist based on your needs

4. Re-sign the main app with freshly written entitlements.plist based on your needs

5. Re-zip the ipa and upload it via Transporter

Good luck !

You can try setting the contenteditable attribute to false it will keep the text and allow you to readonly.

<div
  contenteditable="false">
    content goes here
</div>

It looked like a temporary glitch in the Autodesk hubs api. I am able to successfully query the data now.

Change

:paths ["src"] to location of datafiles :paths["C:\\folder\\clojure\\data"]

in deps.edn

For me echo %JAVA_HOME% command was returning back %JAVA_HOME% in my new Windows system. After setting the JAVA_HOME as "C:\Program Files\Eclipse Adoptium\jdk-21.0.4.7-hotspot, I removed following from pom.xml, which fixed the build issue

    <properties>
        <java.version>21</java.version>
    </properties>

io/resource is looking for the file in the class path, not the current directory. It may even be looking for something/file.txt in the class path, since it's a relative path in the something namespace.

You can enable xp_cmdshell and have a procedure that executes a powershell script using that command. The contents of the script can include anything, and in your case a web request. This doesn't require importing any assemblies, and I find CLR to be overkill for this usercase.

func setupView() {
        let eventMessenger = viewModel.getEventMessenger()
        let model = viewModel.getEnvironmentModel()

        let swiftUIView = CreateHeroSubraceView()
            .environmentObject(eventMessenger)
            .environmentObject(model)

        let hostingController = UIHostingController(rootView: swiftUIView)

        hostingController.view.translatesAutoresizingMaskIntoConstraints = false
        hostingController.view.backgroundColor = .clear
        hostingController.additionalSafeAreaInsets = .zero
        addChild(hostingController)

        view.addSubview(hostingController.view)

        hostingController.view.snp.makeConstraints { make in
            make.edges.equalToSuperview()
        }

        hostingController.didMove(toParent: self)
    }

This looks like a bug, but I made it work properly by adding an empty slot.

Fix does not make much sense, but looks like it forces the correct default slot.

        <template #thead />

Flutter

Just delete the cache folder in the bin folder in the flutter root folder and run flutter doctor -v and all should be well.

I'm not that experienced, and maybe it's not the safest solution, but have you tried running the query so that it returns an Object[] instead? It could help avoid the N+1 issue, since e.subEntity would be loaded in the same query.

If you look at the description of strconv.Itoa, it tells you:

Itoa is equivalent to [FormatInt](int64(i), 10).

Therefore to avoid any issues with truncation, simply use:

strconv.FormatInt(lastId, 10)

It looks like this was asked in the GitHub issues for Kysely already:

https://github.com/kysely-org/kysely/issues/838

The author essentially recommends the solution I proposed in the question itself which is to wrap it in an object:

private async makeQuery(db: Conn) {
    const filter = await getFilterArg(db);
    return { 
      query: db.selectFrom("item").where("item.fkId", "=", filter)
    }
}

Here is a pretty simple regex pattern generator. My approach is really simple, just parsing the end user suitable input string like yyyy-MM-dd,HH:mm:ss or 2025-06-05,08:37:38 and building a new regex pattern by exchanging all chars or digits by \d or escaping some chars like ., / or \.

The main issue was to correctly handle the specific [A|P]M pattern, but I think it should be OK. Honestly, it is not super perfect, but fine for getting a clue how it could be done.

Please let me know if you need further explanations about my code and I will add it here tomorrow.

function new-regex-pattern {
    param (
        [string]$s
    )
    $ampm = '[A|P]M'
    if (($s -match [Regex]::Escape($ampm)) -or ($s -match $ampm)) {
        $regexOptions = [Text.RegularExpressions.RegexOptions]'IgnoreCase, CultureInvariant'
        if ($s -match [Regex]::Escape($ampm)) {
            $pattern = -join ('(?<start>.*)(?<AM_PM>', 
              [Regex]::Escape($ampm), ')(?<end>.*)')
        }
        else {
            $pattern = -join ('(?<start>.*)(?<AM_PM>', $ampm, ')(?<end>.*)')
        }
        $regexPattern = [Regex]::new($pattern, $regexOptions)
        $match = $regexPattern.Matches($s)
        return (convert-pattern $match[0].Groups['start'].Value) + 
          $match[0].Groups['AM_PM'].Value + 
          (convert-pattern $match[0].Groups['end'].Value)
    }
    return convert-pattern $s
}

function convert-pattern {
    param (
        [string]$s
    )
    if ($s.Length -gt 0) {
        foreach ($c in [char[]]$s) {
            switch ($c) {
                { $_ -match '[A-Z0-9]' } { $result += '\d' }
                { $_ -match '\s' } { $result += '\s' }
                { $_ -eq '.' } { $result += '\.' }
                { $_ -eq '/' } { $result += '\/' }
                { $_ -eq '\' } { $result += '\\' }
                default { $result += $_ }
            }
        }
    }
    return $result
}

$formatinput1 = 'M/d/yyyy,HH:mm:ss.fff'
$formatinput2 = 'yyyy-MM-dd,HH:mm:ss'
$formatinput3 = 'yyyy-M-d h:mm:ss [A|P]M'

$sampleinput1 = '6/5/2025,08:37:38.058'
$sampleinput2 = '2025-06-05,08:37:38'
$sampleinput3 = '2025-6-5 8:37:38 AM'

$example1 = '6/5/2025,08:37:38.058,1.0527,-39.5013,38.072,1.0527,-39.5013'
$example2 = '2025-06-05,08:37:38,1.0527,-39.5013,38.072,1.0527,-39.5013'
$example3 = '2025-6-5 8:37:38 AM,1.0527,-39.5013,38.072,1.0527,-39.5013'

$regexPattern = [Regex]::new((new-regex-pattern $formatinput1))
Write-Host $regexPattern.Matches($example1)

$regexPattern = [Regex]::new((new-regex-pattern $formatinput2))
Write-Host $regexPattern.Matches($example2)

$regexPattern = [Regex]::new((new-regex-pattern $formatinput3))
Write-Host $regexPattern.Matches($example3)

$regexPattern = [Regex]::new((new-regex-pattern $sampleinput1))
Write-Host $regexPattern.Matches($example1)

$regexPattern = [Regex]::new((new-regex-pattern $sampleinput2))
Write-Host $regexPattern.Matches($example2)

$regexPattern = [Regex]::new((new-regex-pattern $sampleinput3))
Write-Host $regexPattern.Matches($example3)

https://drive.google.com/file/d/1TGQUtIpuH0FPuXT640OMuJ9jG8YpUbq0/view?usp=drivesdk

https://drive.google.com/file/d/1TGQUtIpuH0FPuXT640OMuJ9jG8YpUbq0/view?usp=drivesdk

Both file are under license ownership of Chandler Ayotte this is a portion of a work in progress. Anyone who loves physics will love this. The volumetric addition of qbits is lacking knowable information that when applied will provide a different perspective. There is an upper boundary completely controlled from surface area

Do you have a custom process? Also under Processing, click on your process. See on the Right pane. Check your Editable region and also your server side condition, make sure you select the right option

If you are using the Universal Render Pipeline, a setting that can produce this issue is the Layer your GameObject is set to could be filtered out in the Filtering property of the default Universal Renderer Data.

The Scene View uses the default Universal Renderer Data set in the URP Asset's Renderer List for it's Renderer settings.

In your URP Asset, double click the first Universal Renderer Data asset in the Renderer List to open it in the Inspector.

Under Filtering, check the Opaque Layer Mask and the Transparent Layer Mask to ensure the Layer your GameObject that is not rendering is checked on, or set the filter to Everything.

See the Unity Manual - Universal Renderer asset reference for URP page for more details on the Filtering property.