The error you're encountering, "The phone verification request contains an invalid application verifier," can sometimes occur due to invalid or unsupported phone numbers. I ran into a similar issue while working on phone number authentication with Firebase, and I found that this error often happens when numbers aren’t fully validated or don’t meet the required standards.

One trick that worked wonders for me was ensuring the phone numbers I was using were properly validated before sending them to Firebase. I started checking the numbers for proper formatting (like E.164 format) and making sure they were actually mobile numbers. I used a phone number validation tool Landline remover that helped me filter out landlines and VoIP numbers, which don’t work well with Firebase authentication.

By adding this validation step, I reduced the number of reCAPTCHA token issues significantly. The numbers that went through were always the right ones, making the process smoother and more reliable.

you should try phone number validation tool " https://landlineremover.com/api/ "may that help you!

I was facing same challenge and got fixed by using the latest below version from maven repository.

<dependency>
        <groupId>org.springdoc</groupId>
        <artifactId>springdoc-openapi-starter-webmvc-ui</artifactId>
        <version>2.8.4</version>
    </dependency>

In Visual Studio (MSVC) on ARM64, __int128 is not supported. ARM64 lacks native 128-bit general-purpose registers but supports 128-bit SIMD (Neon). For 128-bit integers, use GCC/Clang, or workarounds like manual 128-bit arithmetic using uint64_t pairs, Neon intrinsics, or Boost.Multiprecision.

UTMLink streamlines the process of URL tracking by generating custom UTM parameters for your marketing campaigns. With UTMLink, you can easily create and manage UTM codes, track campaign performance, and gain valuable insights into user behavior. This helps you understand what drives traffic, optimize your marketing strategies, and improve ROI with precise, data-driven decisions.

If there’s an issue with the personalization feature in your car rental app, here are key areas to check:

Data Collection and Accuracy: Ensure that the app is properly capturing user preferences, rental history, and other relevant data. Missing or incorrect data can affect recommendations.

Recommendation Engine: The algorithm may need fine-tuning to ensure it’s delivering the right suggestions based on user behavior, location, or car preferences.

User Interface (UI): Review the UI for clarity and ease of use. Personalized content should be accessible and easy to interact with.

Backend Performance: Slow load times or server errors could hinder real-time personalization.

Optimizing these aspects can resolve the issue and enhance the user experience.

hour=0 for i in range(0,24): minu=0 for j in range(0,60): sec=0 for k in range(0,60): milsec=0 for m in range(0,200): print(str(hour)+":"+str(minu)+":"+str(sec)+":"+str(milsec)) milsec+=1 sec=sec+1 minu=minu+1 hour=hour+1

Using CMAKE_TOOLCHAIN_FILE and VCPKG_CHAINLOAD_TOOLCHAIN_FILE worked.

There isn't anything in the OpenGraph protocol that specifies this but what OP actually wanted (and what I wanted, having found the post years later) is what Discord looks for, which is the tag <meta name="twitter:card" content="summary_large_image"/>. Simply adding that gives you a larger image:

If you're using nativewind, this works:

 <FlatList
    contentContainerClassName="gap-2"
    ...
  />

Ant Media Server does support generating PNG, WebP, JPG images from the live streams. It does not currently support uploading PNG images for streaming.

I recommend you to send the stream to Ant Media Server as a WebRTC stream. There is a free WebRTC Android SDK that you can use and you can tune the parameters.

Regards Oguz

It's a delayed response but it may be helpful in the future for other people.

In your application, it happens when there is a long script running and it doesn't complete and sever terminates the process so there are two option

1. Enhance your script.
2. Extend the Memory Limit including Max Execution time

I hope this will solve your query.

I wait for CGI support for 10 years without any lucky. So finally I made a cgi plugin for nginx by myself. https://github.com/pjincz/nginx-cgi

After installing of the plugin, just turn on cgi support by:

location /cgi-bin {
    cgi on;
}

The issue arises because the InAppWebView can consume touch events, making it difficult for widgets placed above it (like dialogs or buttons) to receive those events. This happens because InAppWebView operates as a native platform view, which doesn't behave like regular Flutter widgets in terms of rendering and event handling.

Here’s how you can resolve the issue:

1. Use useHybridComposition Wisely

Since you're already using useHybridComposition: true, this ensures better interactivity with widgets above the InAppWebView. However, you may still need to ensure that the dialog or any overlay content is above the InAppWebView in the widget hierarchy.

2. Wrap the InAppWebView in a Stack

Use a Stack to layer your content so that the dialog or buttons are above the InAppWebView.

3. Use GestureDetector to Prevent Touch Event Interference

If the dialog is not clickable, you can explicitly intercept gestures for the dialog or overlay content using a GestureDetector.

matplotlib is not available for complier.

I installed below and it worked for me

pip install matplotlib

n The Time Traveler's Guide to Elizabethan England, Ian Mortimer’s style is highly effective in immersing readers in the historical period by blending scholarly research with a vivid narrative tone. Mortimer’s conversational approach—using second-person "you" as if the reader is actually traveling back in time—creates a sense of immediacy and engagement. This technique allows complex historical details, such as the social hierarchy, daily life, and customs of the period, to feel more accessible and relatable. Mortimer balances informative exposition with storytelling, avoiding the dryness that often accompanies traditional history writing. His ability to integrate humor, anecdotes, and direct address helps maintain reader interest while still providing a comprehensive and accurate portrait of Elizabethan England. This style not only educates but also entertains, making history feel less like a distant subject and more like a living, breathing experience.

I recently came across Range, Iterators in rust. Since Range expressions implement Iterator trait, the above one should be simple. Here's an example solution

 fn sum_from_zero( n: i32) -> i32 {
    (0..n).sum()
 }

or for closure/one-liner folks

let sum_from_zero = |n: i32| (0..n).sum::<i32>();

Rust Standard Library - Range

Rust Standard Library - Iterator

That's a great suggestion. I will consider those comments in detail.

Instead of action= > use like asp-action="Edit" (name of action method in controller)

[Start]
↓
[Greet the patient]
↓
[Check if patient is new or returning]
↓
┌───(New Patient?)───┐
| Yes | No
↓ ↓
[Register] [Retrieve Records]
↓ ↓
[Confirm Purpose of Visit]
↓
[Check Doctor Availability]
↓
[Verify Insurance & Payment]
↓
[Schedule Appointment]
↓
[Generate Confirmation]
↓
[Update Records]
↓
[Guide Patient]
↓
[End]

It seems like a compatibility issue between your React Native version. I was using "react-native": "0.71.17" with "react-native-gesture-handler": "2.20.0", and I encountered issues. After trying various solutions, I found that downgrading react-native-gesture-handler to version 2.9.0 resolved the problem.

If you're still facing a similar issue, try below steps:

1.Check Kotlin Version

Ensure your project is using the correct Kotlin version. For React Native 0.71.17, Kotlin 1.6.10 is typically recommended. Update your android/build.gradle file to include:

ext {
    kotlinVersion = "1.6.10"
}

1. Rebuild the Project:

   npm install cd android ./gradlew clean cd .. npx react-native run-android

I want to know if there is any way to do this without using a package I don't want dependency on package

Consider to check if it helps to use a specific private (application) port number for the STUN inquiry

stun.get_ip_info(source_ip="0.0.0.0", source_port="54320")

and to also use that instead of PUBLIC_PORT when binding

SOCK.bind((PRIVATE_IP, 54320))

Failing to decrypt the Kerberos ticket means the base key in the keytab is incorrect.

However, the actual cause is not necessarily what you think. You can regenerate the keytab, verify that it's correct and still get ticket decryption failure! Why?

Ticket decryption failure will occur if the SPN is set on the wrong account.

More specifically, if the target SPN is set on the wrong service account (maybe because you created a new account but the SPN was left on the old account), the KDC will issue a ticket encrypted with the base key of the "wrong" account. The client will submit that to your service but your service is using a different base key. Thus decryption failure.

Here's a nice page about Kerberos issues and fixes with a breakdown of causes of ticket decryption failure:

https://www.ioplex.com/learn/DiagnoseAndFixKerberos.html#hmac-failure

The page has some product specific references but it's applicable to Kerberos services in general.

Do You Mean Permalinks? If so, if your worried, use Pretty Permalinks

Why you considered my post off topic? 😒😒 I need to use nethunter 🤦🏻

Since you are trying to access a localhost URL, you might get this error if you are using a secure protocol such as HTTPS instead of HTTP where this kind of behaviour is mostly seen. To resolve this issue, you can manually change the URL from HTTPS to HTTP and try hitting the URL again.

You can also check your web browser settings to allow unsecure connection and any other firewall configurations if any.

Richard. I'm having an issue possibly related to what you were working on here. Were you ultimately able to load outside components dynamically? Any thoughts on what might be causing my bug? Thanks.

docker run -i quay.io/docwhat/jq <sample-data/test.json '.key_1 + .key_2'

try to use 'quay.io/docwhat' image instead 'stedolan'.

Vue.js and react are client side rendering frameworks, where as blade is server side. They each have their benefits, but ssr can be more difficult to work with

Find 'apt ???' Replace 'apt 30'

Find 'apt ??' Replace 'apt 30'

You could use below if you want to replace everything after apt: Find 'apt*' Replace 'apt 30'

do you find any solutions i have the same error and i drift too much but i dont find anything

What instantly meets the eye is that there might be a typo in the IP address specifier:

    if UDP in packet:
        print(f"UDP Packet: {packet[UDP].src}:{packet[UDP].sport} -> {packet[IP].dst}:{packet[UDP].dport}")

Instead of {packet[UDP].src} one probably wants to write {packet[IP].src}.

Yes, you can rely on config support within Metaflow to pass these values from the command line. Here are the official docs for this - https://docs.metaflow.org/metaflow/configuring-flows/basic-configuration#defining-config-files

You can just create a new function to integrate the mathematical function, plug in the limits, and then just calculate it!

If you are awaiting responses in your server components, those might be stuck while trying to pre render the pages in your production environment. You could try debugging running the pnpm run build command locally and if it works, try checking the differences around your dev env variables with the production ones.

If you need more assistance, please provide as much info as you can of your server components

Yes, the test case tab is removed. You may access test plan first then you could see the test case.

So it seems you are actually pushing new routes to the browser History API, then a new "page" needs to reload, hence your server components is called, rendered and the flow goes on with the children components. Why wouldnt you expect to not "re-render"?

Good evening, I tested all the methods mentioned above, but the result was not the same as the original document. Is there a parameter that needs to be set so that it reflects the real document?

Boa noite, testei de todas as formas que passaram acima, mas o resultado não ficou igual ao documento original, tem algum parâmetro que precisa setar para que seja reflexo do documento real?

I think the issue is from combining flex-direction: column-reverse with dynamically loaded content, because the content starts at the bottom, hence reversing the direction, places the first content or the first child of the div at the bottom of the container. Try using flex-direction: column-reverse, which reverses the order of items, and justify-content: flex-start, which aligns the reversed content at the top of the container.

My problem was that the pagination component that comes with ngBootstrap starts at 1 by default every time it loads. So to solve it I had to create a custom component to handle pagination. With that I have the desired behavior.

I had the same problem on Linux mint which is ubuntu under the hood. I am not exactly sure what the root cause is but it appears to be related to latest aws-cdk release 2.171.0 and how cdklocal is using prototypes when mocking aws-cdk calls.

Work around is to install the previous version of aws-cdk

npm install -g [email protected]

can I get the SQL? I am also having a similar requirement. Is there anyway we can extract SQLs from reports of Netsuite so that I can do the same from SuiteAnalytics ?

I haven't used Electron but definitely your mistake should be around the main file when setting it up, specifically in this line:

const appUrl = isDev
        ? 'http://localhost:3000'
        : `file://${path.join(app.getAppPath(), 'out', 'index.html')}`;

Could you try setting it up like this guide? Hope it helps

I was having the same issue. Installing react-native-safe-area-context worked for me.

npm i react-native-safe-area-context

I had a similar issue and was told by Firebase support:

"...in order for you to be able to fully utilize and implement the email link authentication feature in your Firebase project, you will have to configure FDL as mentioned in the documentation (even though it will be deprecated or decommissioned). As mentioned in the documentation, this step is required for you to setup your email authentication feature in your project (hence the error exception you have encountered).

Note that (as stated in this section of the official FAQs page) your email link authentication (Using Firebase Authentication) would still work even after the deprecation of FDL in August 25, 2025. This is because, these two (FDL and Auth) are separate features and Firebase Auth only depends on the FDL service internally, not relying on the FDL SDK (which will be deprecated)."

So the answer seems to be yes, Firebase Dynamic Links are still required even though its doco warns you away from using them.

If you want to import x and use it in another file, you just need to import it once. There's no need for another import or a "grab" function.

main.py:

from ImporterFile import x

print(x)

ImporterFile.py:

x = "hii!!"

Here are some points I want to share about the code:

1. Null Pointer Exception: The error indicates that array[mid] is null when the compareTo method is invoked, resulting in the exception. This implies that there may be elements in your array that are not initialized.

2.Using natural boolean: You don't necessarily need a natural boolean to distinguish between Comparable and Comparator. You can check if a Comparator is provided (e.g., cmp != null) and use it, or default to Comparable if no Comparator is available.

Code improvements:

import java.util.Comparator;

public class BinarySearch<E> {
private E[] array;
private Comparator<? super E> cmp;
private int maxIndex;

public BinarySearch(E[] array, Comparator<? super E> cmp) {
    this.array = array;
    this.cmp = cmp;
    this.maxIndex = array.length - 1;
}

//The correct code
@SuppressWarnings("unchecked")
public int binarySearch(E item) {
    if (item == null) {
        throw new IllegalArgumentException("Item to search cannot be null.");
    }

    int start = 0;
    int end = maxIndex;

    while (start <= end) {
        int mid = (start + end) / 2;

        if (array[mid] == null) {
            throw new NullPointerException("Array contains null elements at index " + mid);
        }

        int comparison;
        if (cmp != null) {
            comparison = cmp.compare(item, array[mid]);
        } else if (item instanceof Comparable) {
            comparison = ((Comparable<? super E>) item).compareTo(array[mid]);
        } else {
            throw new IllegalStateException("Item is not Comparable, and no Comparator was provided.");
        }

        if (comparison == 0) {
            return mid;
        } else if (comparison < 0) {
            end = mid - 1;
        } else {
            start = mid + 1;
        }
    }
    return -1;
}

public static void main(String[] args) {
    Integer[] arr = {1, 2, 3, 4, 5, 6, 7, 8, 9};
    BinarySearch<Integer> search = new BinarySearch<>(arr, null);
    
    int index = search.binarySearch(5);
    System.out.println("Index of 5: " + index);
}

}

WinForm applications on certain controls does not like PNG format images. When importing images to your image list, use a image format other than PNG. ICO files retain transparency and do not have any compression/draw issues.

One way to achieve this could be doing such as:

var data = new Map();
data.set('b', 2);
data.set('c', 3);
var prependData = new Map();
prependData.set('a', 1);
prependData.set('z', 26);
var fullData = new Map([...prependData, ...data]);

// Check content
Array.from(fullData.entries())

Or to be closer to your question:

var fields = new Map([
    ['product_type', {
        value : 'PRODUCT'
    }],
    ['supplier_product_type', {
        value : 'INTERNAL'
    }]
]);

fields = new Map([['new_key', {
        value : 'new value'
    }], ...fields])

// Check content
Array.from(fields.entries())

Please be aware there is a performance penalty for doing so this way.

Also, please check this thread: Simplest way to merge ES6 Maps/Sets?

yea, just make it so its a %23, so its encoded and the server would recognize the existence. or just dont use "#" at all,

f you are still experiencing connection issues with RedshiftSQLOperator, you should check your AWS Security Group settings to ensure your Redshift Serverless instance is accessible. Here's how you can do it:

Go to AWS Console → VPC → Security Groups. Find the Security Group attached to Redshift Serverless: Go to Redshift Serverless → Workgroup → Networking & Security. Note down the Security Group ID (e.g., sg-xxxxxxx). Modify the Security Group inbound rules: Go to "Inbound Rules" → Edit rules. Add a new rule: Type: Redshift Protocol: TCP Port: 5439 (default Redshift Serverless port) Source: If you are on a personal computer, add your public IP If you want to allow all connections (for testing only), use 0.0.0.0/0. Click "Save changes". If this rule was missing, it was likely the cause of your issue!

I’m a bit late to the party, but I hope this helps someone who might still be pulling their hair out over this issue.

The issue is with how CMD and ENTRYPOINT work together. Your CMD isn't working because it is trying to run bash with no arguments, rather than setting up python as the base command.​​​​​​​​​​​​​​​​ Here's how I’ll fix this:

FROM python:3.11-slim

ENTRYPOINT ["python"]

The difference is:

• CMD gives a default command that can be completely replaced
• ENTRYPOINT sets the base command that docker run arguments get added to

So with ENTRYPOINT ["python"]:

• docker run image --version becomes python --version
• docker run image script.py becomes python script.py

Also, this blogpost breaks these concepts down pretty well. https://www.docker.com/blog/docker-best-practices-choosing-between-run-cmd-and-entrypoint/

It was a subtle exception in the state object (the queue object and not the item object)

I need to read the entire output message even if it has a huge stack trace

Thank you for your attention

This has been answered over and over, but I wanted to throw in the slightly different one when using Quarto-

<!--# This is a comment -->

The "#" lets it be highlighted in the visual editor.

Source/more information: https://quarto.org/docs/visual-editor/content.html#commenting

how can I test/run coverage on files changed in a feature branch, over time, not just the currently changed files?

This answer is not specific to Intellij since it uses an external tool git test. This tool let you define tests which it let you run tests against each commit on a branch (or rather a range of commits).

With regards to not testing everything but rather only changed files¹ you can have a look at my fork with a branch where I show how to avoid running npm install unless the package.json file is changed.

I guess you should be able to run git diff --name-only HEAD^, map to corresponding test files and then pass along to xargs.

¹ However notice that git-test caches test results in git notes, so once a test has passed on a commit re-running the test for that commit is almost instantaneously since it only fetches and shows the cached result.

thats hard to do with chrome driver. id recommend finding a driver that has less stupid uneeded trackers like google does those take threads up aka use cpu

Thank you so much for posting your solution, finally something that works. did you figure out the actual image saving implementation. Would appreciate if you could share it here as well.

There are two methods to add test users to your Google Home Action.

Method 1: Adding Testers via Google Cloud Platform (GCP) This method allows you to add a limited number of testers directly in the Google Cloud Platform (GCP) for your project. Steps:

1. Log in to the Google Cloud Platform Console for your project.
2. Navigate to IAM & Admin > IAM in the left-hand menu.
3. Click on Grant access for your project.
4. In the “Add principals” section, enter the email address of the tester.
5. Assign the “Viewer” role to the tester.
6. Click Save to finalize the process.

Images for reference: Grant access in View by principals Add test users

Method 2: Using Field Trials via Matter For larger testing efforts or when working with Matter-supported devices, using Field Trials is the recommended method. This process is integrated into the Matter section of the Google Home Developer Console. Steps:

1. Go to the Google Home Developer Console.
2. Navigate to Matter > Test > Field Trials in the left-hand menu.
3. Click on Run a Field Trial.
4. Add the testers by entering their email addresses and assign the necessary permissions for testing.

Images for reference: Matter console Field Trail

thanks to Phil, add a value to each menu item

            <MenuItem
              value="1"
              onClick={(e) => console.log(`[MenuItem1] ${e.value} clicked`)}
              className={menuItemClassName}
            >

AVX10.2 adds 256-bit {er} and {sae} support, encoded with U=0.

sandpile.org annotates those instructions with a leading '!!' in the 2-byte opcode, 3-byte opcode, and opcode group tables, and has a great summary of the U bit at the bottom of the opcode encoding page.

I managed to solved this. It is weird that I dont have a values.xml file but I edited this file under

/Users/kj/.gradle/caches/transforms-3/0f8e1f19c5fbeeae287aa57770c7b671/transformed/jetified-colorpicker-0.9.1/res/values/values.xml

and remove the conflicting lines.

As far as IHttpActionResult NotFound(), .NET 9 now has an overload. For example,

return new JsonResult(NotFound("Item not found"));

returns

{"value":"Item not found","formatters":[],"contentTypes":[],"declaredType":null,"statusCode":404}

Why don't you just exclude vscode/settings.json file from .gitignore and add it to the git repository?

There's nothing wrong in sharing your configuration among your teammates if that's what you have agreed upon.

As for more granular approach, unfortunately it's not currently possible. There is opened issue for this in vscode git repo which would allow to extend config from some basic configuration (which would make it possible to share only part of config and not file as a whole), but it had not progressed for several years, so I guess it's not a high priority issue.

For those that are here because of configuring image pipeline:

scrapy.contrib has been moved to the top level module so now its scrapy.pipelines.images.ImagesPipeline which was changed in version 1.6

const isPalidrome = s => {
    let b = true;
    for (let x=0, y=s.length-1; x < y && b; x++, y--)
        b = s[x] == s[y];    
    return b;
}

console.log(isPalidrome('poop'));

You can use 'coproc' before the command, instead of '&' after the command.

See 'man bash', and search for "Coprocesses".

I have the same problem right now. I'm downloading images from cloudinary and images are not displaying. Did you find a solution?

String a = "hello world";

void setup() {
  Serial.begin(9600); 
}

void loop() {
  Serial.println(a); 
  delay(1000);       
}

Click here to preview image

.card {
        height: 100%;
    }
    .card-body {
        padding: 2em;
    }
    .feature-list li {
  position: relative;
  padding-left: 30px;
  list-style: none;
  margin-bottom: 10px;
}

li::before {
  content: '';
  position: absolute;
  left: 0;
  top: 45%;
  transform: translateY(-50%); 
  width: 20px;
  height: 20px; 
  background-image: url('https://static.vecteezy.com/system/resources/previews/033/294/018/non_2x/fill-green-tick-mark-approved-check-mark-icon-symbols-symbol-for-website-computer-and-mobile-isolated-green-tick-verified-badge-icon-social-media-official-account-tick-symbol-vector.jpg'); 
  background-size: cover;
}

Building on @scott-jibben's idea of using Indices and ranges, and adding support for nulls and strings shorter than the desired max length, I arrived at the following extension method for LEFT:

public static string Left(this string myString, int maxLength)
{
    if (string.IsNullOrEmpty(myString)) return myString;
    return myString[..Math.Min(maxLength, myString.Length)];
}

when you try to log console.log("session", session) in your cart.js what is the output of the log? one other question: Did you check your connection string for mongoDB usually it is different on production from the one you use for development/staging the case might be that you have issue with the database connection, it may return null and triggering a redirect. try adding these logs inside the checkout.js: console.log("User from DB:", user); console.log("Cart from DB:", cart);

Late to this party, but it does support TimescaleDB as of late 2024 🎉

https://documentation.red-gate.com/fd/supported-databases-and-versions-143754067.html

In my case, I had a Person Picker field with invalid values. The person had left our organization. Once I removed their name, the record would update.

In order to find the record causing the issue, I created a simple update query. It selected the record ID, and updated a dummy field with filler text. When the error message appeared (ie. the dummy field would not take the filler text), the ID at the top of the Table View was the record that was throwing the error.

Anyone with the same problem? Recently I had the same problem in a code, I managed to fix it with: I configured dotenv in the same file that is calling the variable. The problem was that the dotenv was configured in the server file and the variable was being called in another file that was not having access to it, the variable was returning as undefine.

I know this is an old post, but thought I'd put my solution here just in case someone else is trying to get this integration working. I was able to successfully connect Stamps.com to Magento 2.4.  There were two tricks to get it to work.

1. There is one drop down "Invoice after shipping" that does not show on the connection screen in Stamps.com due to some incorrect css.   Correcting the css in the browser to remove the fixed display property for the element allowed me to select this option and ability to try to connect. On the .storeConnect .action-row class rules remove the fixed position styling.

2. Install the Shipstation extension, not the one provided by Stamps.com - https://github.com/shipstation/plugin-magento.

After making these two changes, I was able to connect to Magento and when printing labels it sends the tracking information and creates a shipment to complete the order in Magento.

A little late... just install tzdata.

pip install tzdata

and use it.

from datetime import datetime
from zoneinfo import ZoneInfo
time_bo = datetime.now(tz=ZoneInfo('America/La_Paz'))
print(time_bo)

SmartScout has an API of Amazon brands and category marketshare. There's keywords and products, but the high level stuff is there.

This is not an answer in the specific sense, but a general response to your question that I hope will be helpful.

[As ever, I defer to @raiph's attention to detail and actual code fix]

I am very impressed with the progress that you have made and would encourage you to keep going ... I have built several realworld raku grammars and they are always quite intricate since that is the nature of parsing/regex at a character level. I am sure you know to take ChatGPT with a pinch of salt.

At first, I wanted to say "don't use raku grammars to solve this problem, the quickest way to extract data from your source file is more likely to be a set of regexes". Why? Well the source file is quite odd - there is a prediliction for newlines and repeated info. A regex type approach would try and pick out anchors (eg section, subsection, subsubsection) and then key off these to capture the variable data. In contrast a grammar like yours is trying to pick up all the text and is more work and more prone to small errors.

Then I saw you wrote that you want to check the correctness/completeness of the source. [This goal seems a bit nutty to be, but I am sure you have your reasons]

In this case, I think you have made a good (comprehensive) start, but your Grammar is brittle - would you really care if version 0.001 became version 0.002?

So, my current view based on how I would do this myself, is to say that your grammar token structure needs to have a good impedance fit with the language that you are parsing. This is another way of saying take a top down look and try to extract the patterns that you want to extract in a hierarchical way.

What do I mean by that, what would I change...

1. Many of the features are 3 line stanzas - so I would try to make a general to match these paras

2. Many of these have repeat text - so I would try to check and then eliminate the duplications

3. They have a consistent syntax built with components, so have tokens for each component

Something like:

... what you have already around TOP ...

token stanza  { <header> <tagged> <untagged> }

token header  { '@' ['section'|'subsection'|<subsub>] }

token tagged  { '[#:tag "\' <factor> <subject> <yyyymm> ']' }   # look up ~ and % in the docs
token untagged { '{' <factor> <subject> <yyyymm> '}' }
token factor  { Factor \d+ ':' <.ws> }
token subject { [\@italic\{]? [Quaffing | Quenching] [}]? ',' <.ws> }
token yyyymm  { like you have it }

This is just a rough idea ... but hopefully you get the feeling for the level of granularity / reusability of tokens.

Following up on @Akshaykumar's solution, I encountered this error: FAILURE: Build failed with an exception.

What went wrong: Execution failed for task ':app:checkDebugAarMetadata'.

A failure occurred while executing com.android.build.gradle.internal.tasks.CheckAarMetadataWorkAction An issue was found when checking AAR metadata:

1. Dependency ':flutter_local_notifications' requires core library desugaring to be enabled for :app. See https://developer.android.com/studio/write/java8-support.html for more details.

To resolve this, add the following to your android/app/build.gradle:

1. Add the desugaring dependency:

dependencies {
    coreLibraryDesugaring "com.android.tools:desugar_jdk_libs:2.0.3"
}

Enable Java 17 and desugaring:

gradleCopyandroid {
    compileOptions {
        sourceCompatibility JavaVersion.VERSION_17
        targetCompatibility JavaVersion.VERSION_17
        coreLibraryDesugaringEnabled true
    }
}

Can you share your CrimeListAdapter code, and the edit crime fragment code?

i'm encountering this issue and its not permissions related. it seems someone deleted the deployment pool. deleting and recreating the environment does not solve the issue. the new environment has the same problem.

I installed the Intel version of R by mistake. For anyone else struggling with this, you can find the ARM install here

I had the same problem when creating a map file .ber with Vim. My code ran very well when I created the map with VS Code, but one of my colleagues, he tried to test my code and created a map by Vim. Boom! I got the segment fault. After many tests, I realized that Vim always unexpectedly adds a '\n' like an EOF. But VS Code doesn't. So I was so confused! Finally, I have the confirmation here in this question. Thank you so much for the question and the answers below!

My mistake was that the camera was turning the player and the player himself was turning, there was a conflict, so when the camera was looking at the player's back, there was no shaking, because there was no rotation conflict, and when moving sideways relative to the camera, there was a conflict.

Player code

private void PlayerMove(Vector3 move)
{
    if(_isAttacking == true) return;
    _player.PlayerAnimator.SetFloat("Value", move.magnitude);
    var forward = _camera.transform.forward;
    var right = _camera.transform.right;
    forward.y = 0;
    right.y = 0;    
    forward.Normalize();
    right.Normalize();
    Vector3 movement = (move.x * right + move.y * forward);
    movement.y = 0;
    
    Vector3 val = _playerModel.PlayerSpeed * Time.fixedDeltaTime * movement;
    _player.PlayerRb.MovePosition(_player.PlayerRb.position + val);
    

    if (movement.magnitude != 0)
    {
        Quaternion targetRotation = Quaternion.LookRotation(val);
        _player.PlayerRb.rotation = Quaternion.Slerp(_player.PlayerRb.rotation,
            targetRotation, _playerModel.PlayerRotationSpeed * Time.fixedDeltaTime);
    }
}

I deleted these lines in the camera code.

private void ToUpdate()
{
    var targetRotation = Quaternion.Euler(0, _cameraMovement.x, 0);
    _player.transform.Rotate(new Vector3(0, targetRotation.x,0),Space.World);
}

https://youtu.be/P61KHd4aBxk new video

I created my account just to share that I found a way.

Context:

• My banner name is "bannerView"
• I load it with bannerView.load(GADRequest())

And looking through all the commands I found:

bannerView.removeFromSuperview()

and it worked like a charm!

Hope it's not too late and I helps!

PD: Keywords so people find this answer:

How to dismiss Admob banner AD in swift in Xcode

Remove Admob add from view in swift in xcode

Stop Admob add from showing in swift in xcode

I tried something, and I came up with this (replace it to your css):

.card-body {
    padding: 2em;
}

.feature-list {
    list-style: none;
    padding: 0;
}

.feature-list li {
    display: flex; 
    align-items: center; 
    padding: 0.5em; 
}

.feature-list li::before { /*img styling*/
    content: ''; 
    display: inline-block; 
    background: url('imms.png') no-repeat center center; 
    background-size: contain;
    width: 20px;
    height: 20px;
    margin-right: 0.5em; 
}

This will align your text with the image like this:

Let me know if it works for u; happy coding!

It turns out adding the flag --legacy-peer-deps to any install makes it work.

I'm having this issue too - running code that hasn't changed in last month. I think it might be to do with the recent broom.helpers update looking through my backtraces.

Here is the exact REST API you need to call to Run an Indexer (which in turn refreshes the index)

https://learn.microsoft.com/en-us/rest/api/searchservice/run-indexer

Did you start seeing this error after doing anything specific, like upgrading a dependency?

How did you managed to run webtorrent package client side?!

Hardcoding the width property of the DropdownMenu seems to work, but I have a thing against hardcoding size properties in this sense due to responsiveness issues.

In some cases you can try the following:

1. Right click the solution in the visual studio solutions window
2. Resolve Errors

I tried all other solutions including reinstalling SSRS extension but the above helped.

I ran into this multiple times. I got tired of having to spin up a backend to use the OpenAI API and figure out security and analytics per user in my apps so I created Backmesh which lets you safely call any LLM API from your app using a JWT proxy without exposing your API Keys or a backend. Check out the security documentation to learn more. It is also open source and can be self hosted. Happy to help you out on our Discord if it is still relevant or feel free to DM me!

For some reason, strings in PHP can cause this behaviour, since escaping characters can only happen inside double quotes.

If you have any string, you can overcome this PHP limitation by just using this line of code:

$msg = str_replace('\n', "\n", $msg);

*where msg is your string.

After doing npm install -D tailwindcss, use npx tailwindcss-cli@latest init to create the tailwind.config.js file. Updated with verion v4.0.

Found the fix, manifest needs the "query all packages" permission, like so

<uses-permission android:name="android.permission.QUERY_ALL_PACKAGES" />

<!-- Other permissions and application components -->

Did anyone able to solve this? I have tried but throwing error for: Multiple entries with same key: primary=JdbcTable {primary} and primary=JdbcTable {primary}

Here is the relevant part of my Java code:

// Initialize Calcite connection with case-sensitive settings
Properties info = new Properties();
info.setProperty("lex", Lex.MYSQL.name());
info.setProperty("caseSensitive", "true");
Connection connection = DriverManager.getConnection("jdbc:calcite:", info);
CalciteConnection calciteConnection = connection.unwrap(CalciteConnection.class);
SchemaPlus rootSchema = calciteConnection.getRootSchema();

// Connect to CockroachDB
org.postgresql.ds.PGSimpleDataSource cockroachDS = new org.postgresql.ds.PGSimpleDataSource();
cockroachDS.setUrl("jdbc:postgresql://localhost:26257/sample");
cockroachDS.setUser("root");
cockroachDS.setPassword("");

// Connect to H2
org.h2.jdbcx.JdbcDataSource h2DS = new org.h2.jdbcx.JdbcDataSource();
h2DS.setURL("jdbc:h2:testdata;AUTO_SERVER=TRUE");
h2DS.setUser("");
h2DS.setPassword("");

// Add schemas
rootSchema.add("CRDB", 
    JdbcSchema.create(rootSchema, "CRDB", cockroachDS, 
        "sample",  // catalog
        "public")); // schema

rootSchema.add("H2DB", 
    JdbcSchema.create(rootSchema, "H2DB", h2DS,
        "DEFAULT",  // catalog
        "PUBLIC")); // schema

// Execute join query with simplified schema references
String sql = 
    "SELECT c.customer_name, o.order_id, o.order_date " +
    "FROM CRDB.customers c " +
    "JOIN H2DB.orders o ON c.customer_id = o.customer_id";

try (Statement statement = calciteConnection.createStatement()) {
    System.out.println("Executing query: " + sql);
    
    // Enable debug logging
    statement.execute("EXPLAIN PLAN FOR " + sql);
    ResultSet explainRs = statement.getResultSet();
    System.out.println("\nQuery Plan:");
    while (explainRs.next()) {
        System.out.println(explainRs.getString(1));
    }
    
    // Execute actual query
    ResultSet rs = statement.executeQuery(sql);

    // Print results
    System.out.println("\nQuery Results:");
    while (rs.next()) {
        System.out.printf("Customer: %s, Order ID: %s, Date: %s%n",
            rs.getString(1),
            rs.getString(2),
            rs.getString(3));
    }
} catch (SQLException e) {
    System.err.println("Error executing query: " + e.getMessage());
    e.printStackTrace();
}

// Clean up
connection.close();

Your javascript code just needed a little tweaking. It should look something like this:

    // your previous code
    const formData = new FormData(form);
    const searchParams = new URLSearchParams();
    for (let [key, value] of formData.entries()) {
      searchParams.append(key.toString(), value.toString());
    }
    
    fetch(form.action, {
      method: 'POST',
      body: searchParams.toString(),
      headers: {
        'Content-Type': 'application/x-www-form-urlencoded',
      },
    })
    // your other code

I just checked with myself, it should work, request.POST should now contain the form data. Check it out and let me know if it works for you?

p.s. I did not use your update_expense controller code.

The simple answer would be as follow

In window.onload, "onload" is a method that invokes the function as soon as the whole page is ready to process the code. the function will only invoked after the whole page including other js/css/media files has been loaded properly then window.onload function fires and executes the code written in the method.

In $(document).ready() "ready" is a jQuery method that is used to invoke a function as soon as the DOM(document object model) is ready irrespective of whether images, CSS, or other asset files are loaded or not.