Did you ever solve this? I have just come to the same problem with the much superior 'Material-Table' to Datagrdid now being unsupported.

In my case I had other Gradle version downloaded in project/android/.gradle/{version_number} so I deleted other versions different from the one I had in project/android/gradle/gradle-wrapper.properties

distributionUrl=https\://services.gradle.org/distributions/gradle-7.5-all.zip

It's common practice to prevent security issues, if some third party possibly get your auth token they will be able to use your account permanently. Logout after sometime (in most cases it 1-2 weeks) will help in this case, because their stoled token will not be valid. So, you just need to try authorize again after getting Unauthorized exception, and if error is repeated then throw it to user.

The last version before version 5, which worked for me, was protobuf==4.25.5

while i can't directly give you the solution but you can try to find the exception or error messages from linux app service using one of the below methods:

1. go to web app -> monitoring -> log stream, see if the console providing an error output.

2. install VS Code, install azure app service extension. sign in your azure account, browse to your linux web app, finally try to access raw system log as shown in the screenshot. I found I have more success rate finding raw exception this way.

You can implement the logic inside the interface as default implementation. Thus, avoid duplicating it. Refer to https://www.baeldung.com/java-static-default-methods#why-interfaces-need-default-methods for more details.

e.g.

public interface Handler  {
 default Container createComponents(ar1, arg2, arg3) {
  // logic here
 }
}

public class DefaultHandler implements Handler {
}

@ViewScoped
public class SpecificHandler extends DefaultHandler {
}

At the cost of a slight performance hit and some extra memory usage, you could go for something like

errorBuilder.Append($"{"Duplicated ID"},{"Invalid cost"},{"Unsupported Service for account"}");

in the interpolated string ($"") you can insert any variables with {} more info on performance and memory usage:

https://blog.ladeak.net/posts/string-interpolation-stringbuilder#:~:text=StringBuilder%20is%20used%20to%20append,the%20appended%20string%20to%20Builder.

Okay, I just need to add Rider to Developer tools to avoid security checks. Solved!

The issue lies in how TypeScript and JSDoc interact. Specifically, in JSDoc, expressing that this method should be a specific object like foo can be tricky, but it’s possible. To fix this issue and achieve proper IntelliSense and type inference, explicitly define the @this annotation using the exact object type.

Here’s how you can fix your code:

Solution

/**
 * @typedef {Object} Foo
 * @property {string[]} bar
 * @property {Baz} baz
 */

/**
 * @typedef {Object} Baz
 * @property {function(this: Foo, string): number} bing
 */

const foo = {
    /** @type {string[]} */
    bar: [],
    /** @type {Baz} */
    baz: {
        /**
         * @param {string} x
         * @returns {number}
         * @this {Foo}
         */
        bing(x) {
            this.bar.push(x);
            return 42;
        }
    }
};

// methods are invoked like so:
const method = "bing";
foo.baz[method].call(foo, "blah");

Explanation:

1. Define a @typedef for Foo: This defines the type of the foo object. It specifies that foo has a bar property (an array of strings) and a baz property of type Baz.
2. Define a @typedef for Baz: This describes the shape of the baz property, including the bing method, which is explicitly annotated to use this: Foo.
3. Add @this {Foo} in bing: This ensures that the this context of the bing method is typed as Foo.

If you were to use @type {typeof foo}, IntelliSense often struggles because typeof foo cannot be fully resolved in the JSDoc context. Explicitly defining Foo and Baz gives TypeScript the clarity it needs

To fix this, I added this style and my problem was solved

::ng-deep .mat-tab-list {
  width: 100%;
}

Rectangles of ALL sizes (including those which may be considered squares) must be counted. I am still counting and I have at least 60. Any correct answers?

After spending considerable time investigating this issue, I was unable to pinpoint the exact cause of the random data loss in Redis running on Azure Container Instances (ACI), even after trying different configurations of redis.conf. The problem persisted, and I couldn't achieve the stability needed for my use case.

To address this and make progress, I decided to deploy Redis on an Azure Virtual Machine (VM) within a private VNet (using terraform). This approach proved to be stable, and I was able to maintain a reliable Redis database. I chose this solution for two main reasons:

1. Cost Efficiency: Running Redis on an Azure VM allowed better cost control compared to other managed solutions.
2. Flexibility: It gave me full control to configure and manage the infrastructure according to my needs.

That said, for scenarios where quick deployment and minimal development effort are priorities, Azure Redis Cache could be a viable alternative. It offers a managed Redis service with built-in reliability and persistence, making it ideal for use cases that require minimal infrastructure management.

This solution might help others facing similar issues or looking for a balance between cost, control, and ease of use.

Sometimes, it's just a service issue on GitHub side.

So don't forget to check this dashboard out to see if anything has been posted there.

The only thing that helped me was "View" -> Open in "NbClassic" (see last option in the image) View options in Jupyter

It looks like you need a full outer join on Date and Name. The full outer join ensures that in your result you will also get Dates and Names that are only present in Table1 or Table2.

SELECT *
FROM Table1
FULL OUTER JOIN Table2
ON Table1.Date = Table2.Date AND Table1.Name = Table2.Name

check this new package this helped me alot https://www.npmjs.com/package/vue-dynamic-localization?activeTab=readme

Solution from siggermannen, thanks! If I use Alter View, then it does not remove collate part.

Might be too late for this to be relevant for the OP but for anyone googling this it is to do with transaction vs tuple context.

• Lock:transactionid = Waits on a lock held by a transaction with lock info available in memory. The blocking transaction might also hold other locks than just the one on this tuple.
• Lock:tuple = This is the row/tuple level lock you think it is. It's just that in views like pg_locks you are more likely to see the transactionid locks as the tuple-level lock info is usually held on disk.

"Although tuples are a lockable type of object, information about row-level locks is stored on disk, not in memory, and therefore row-level locks normally do not appear in this view. If a process is waiting for a row-level lock, it will usually appear in the view as waiting for the permanent transaction ID of the current holder of that row lock."

from https://www.postgresql.org/docs/17/view-pg-locks.html

@BlzFans Have to done that?? can u give me step by step guidance?

use :

npx localtunnel --port 8000

I encountered the same issue where the file would not respond when executed even after permissions were granted, and it could be run in the terminal. Later, I found out it was due to the file not being trusted. Please execute the following command to trust your file.

gio set file/path metadata::trusted true

I hope this solves your problem.

You can configure a custom email provider by handling the OTP Send event using your own API.

For more information, see Configure a custom email provider for one time passcode send events (preview).

UIImage(systemName: "faceid")
UIImage(systemName: "touchid")

How do you Access the EnemyInteractions class? Like @BugFinder mentioned, yo have the wron instance. So it would help to know how you access the instance.

I have checked line endings and they are all LF but I spotted that the working docker file was as ASCII text and the non working ones were in Unicode UTF-8 when I changed them to ASCII encoding it started to work OK.

If non of the solutions above worked for you, here it is:

Define the MYSQL_CLIENT_FLAGS constant before

require_once(ABSPATH . 'wp-settings.php');

And defining will be

define('MYSQL_CLIENT_FLAGS', MYSQLI_CLIENT_SSL);

Here's how you can properly attach the ThrottleMiddleware with parameters

use GrahamCampbell\Throttle\Http\Middleware\ThrottleMiddleware;

Route::get('summary/{topicid}/{issueid}', [App\Http\Controllers\SummaryController::class, 'show']) ->middleware([ThrottleMiddleware::class . ':10,30']);

and what if I want to see a text if that particular category is not present, for example "category does not contain products"

I'm trying to do something similar, I have a list that I want to divide into different categories, I created the tab to navigate the various categories, and I used this code to filter the categories, only I would like to see a text where there are no products in the category, the category does not contain products, but for now I have not yet managed to do it, can anyone help me?

h=int(input())

f=[]
for e in range(h):
    f.append(int(input())
if f%2==0:
    print((e[f/2]+e[f/2+1])/2)
else:
    print(e[(f+1)/2])

In actual versions you can find this settings in

File > Settings > Editor > General > PHP > Smart Keys

Check "Select variable name without '$' sign on double click" It's done

This statement updates your column to the first 22 characters of its content.

UPDATE SampleTable
SET SampleField = LEFT(SampleField, 22)

'''python

j=int(input())

u=[]

for i in range(j):

u.append(int(input())

u=sorted(u)

if j%2==0:

print((u[j/2]+u[j/2+1])/2)

else:

print(u[(j+1)/2])

'''

Try using below code along with above answer: var smtpClient = new SmtpClient("smtp.gmail.com") { Port = 587,Credentials = new NetworkCredential("gmail emailid", "App Password"), EnableSsl = true,};

It seems, that there is an in-built functionality to perform this action in MS Fabric: https://powerbi.microsoft.com/en-us/blog/dynamic-subscriptions-for-paginated-reports-preview/

Otherwise, you could implement it yourself using the Power BI REST API like here.

did you find any method to include data files in exe? I'm trying to do same with qml but it doesn't work if I delete images and qml files from source folder.

Great explanation for this can be found here: https://steve-mushero.medium.com/elasticsearch-index-red-yellow-why-1c4a4a0256ca

under #Edit the layout, change "Month" to whatever title you like to change the title. To change the name of the months you should change your month array under #add data

Never mind, I reconstruct my code to be as follow:

var rowAddr = spreadsheet.getRange('F21');

for (var i = 1; i <= numOfCopy-1; i++){

          

          var DestCell = 22 + (i * 4);
          rowAddr.setValue(DestCell);
          DestCell=spreadsheet.getRange('F22').getValue()
          //SpreadsheetApp.getUi().alert(DestCell);
          spreadsheet.getRange(DestCell).activate();
          spreadsheet.getRange('C22:E25').copyTo(spreadsheet.getActiveRange(), SpreadsheetApp.CopyPasteType.PASTE_NORMAL, false);
        
        }

So I use Cells in Google sheet to process the concatenation, put the next row address value to google sheet. And it works.

Seems they've solved this problem as this related issue is closed - https://github.com/dlmanning/gulp-sass/issues/837

So I've updated the gulp dependencies to their latest versions, and the deprecation warning is gone

"gulp": "^5.0.0",
"gulp-sass": "^6.0.0"

1. "Make sure the context in your intent is correct!"
2. "You can simplify your business logic to only include the code for the intent transition and try to identify the problem."

import random

k=int(input())
c=int(input())

b=[]
for e in range(c):
    b.append(int(input())

q=[]
while true::
    q.append(b[random.randint(1,len(b)])
    if sum(q)==k:
        break

Given the fact that 8+ years later, as of 2024.2.4, a fully in-IDE solution still doesn't seem to exist, it's perhaps worth mentioning that I ended up writing a git hook that fixes the import order only in files that were changed or added in a particular commit.

The LNK2019 unresolved external symbol occurs when linker couldnt find a definition for a refernce to a function or variable. i found good explaination here

How can I solve the error LNK2019: unresolved external symbol - function? https://learn.microsoft.com/en-us/cpp/error-messages/tool-errors/linker-tools-error-lnk2019?view=msvc-170

as per comments from VZ. and Igor.

You might have declared the constructor for dataPanel in your class definition but did not provide an implementation for it. The compiler finds the declaration but cannot locate the corresponding definition, causing the linker to fail.

Add the implementation of dataPanel::dataPanel in your .cpp file and make sure your dataPanel class is included in your main application file.

In your constructor file

#include <wx/wx.h>
#include "dataPanel.h" // Include the header file for dataPanel

dataPanel::dataPanel(wxFrame* parent)
    : wxPanel(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL, "dataPanel")
{
    // Initialization code here (optional)
    SetBackgroundColour(*wxWHITE); // Example: Set background color to white
}

0

d=[]

import random

for n in range(100):

d.append(random.randint(1,10))

print(d)

for i in range(10):

print("The number of",str(i)+"'s","in the list is",d.count(i))

Your code is incorrect. You are using [1] instead of 1. It looks for lists rather than integers. The corrected code checks the integers. Because of the difference between the type of variables, it gives you a logical error. A logical error is unrelated to a computer saying that it has an error. It means it gives you the wrong output.

OK I was likely able to solve it on our side (at least it looks like it, but need to wait 1-2 days if it happens again).

Reason is more or less described in this issue: https://github.com/aws/aws-sdk-js-v3/issues/6763

tldr:

in SDK V2

new S3({
  httpOptions: {
    timeout: 10 * 1000,
    connectTimeout: 10 * 1000,
  }
});

was used to configure the timeouts of the S3 client.

This was somehow supported for some time also in SDK V3 but suddenly was not supported anymore (around version 3.709 somewhere).

The correct way now is to configure the timeouts via

new S3({
  requestHandler: {
    requestTimeout: 10 * 1000,
    connectTimeout: 10 * 1000,
  }
});

in the S3 client.

See also: https://docs.aws.amazon.com/AWSJavaScriptSDK/v3/latest/migrating/notable-changes/ https://docs.aws.amazon.com/AWSJavaScriptSDK/v3/latest/Package/-smithy-node-http-handler/Interface/NodeHttpHandlerOptions/

The default Async adapter does not support broadcasting. To enable broadcasting, I need to configure a persistent adapter like Redis for Action Cable.

As far as I can see, twilio sdk 10.4.1 uses exact same jackson version as you defined in you pom.xml (2.14.0). Thus, you do not overrule jackson but remove required jackson-core package at all. I propose 2 options:

• upgrade twilio SDK to the most recent one, providing expected jackson verions
• or add all excluded jackson dependencies in the version you expect.

Use a logical operator:

.rule=Host(`my-git`) || Host(`my-git.my.lan`)

Don't use area, use SVG elements.

time.sleep(x) leads to some issues
see: https://playwright.dev/python/docs/library#timesleep-leads-to-outdated-state
better use page.wait_for_timeout(x * 1000)

r=[]

import random

for q in range(100):

r.append(random.randint(1,10))

print(r)

for p in range(10):

print("The number of",str(p)+"'s","in the list is",r.count(p))

Use the function imagepng() as you are doing.

If it doesn't exist an image it creates a new one.

By default it will overwrite the file if it already exists.

The problem you are talking about in my opinion is related to the file permissions or the way the file path is handled.

@Jakkapong Rattananen

"I think your user that use for run php doesn't has permission to write to your file path."

I think the same.

Your user must have permissions or the path must be writeable.

To be sure set it up to 666 or better to 777.

Take a look at the complete code to do what you want to do

// Resizing or modifying the image
imagecopyresampled($temp, $image, 0, 0, 0, 0, $neww, $newh, $oldw, $oldh);

$path = "../tempfiles/"; //it's yout path $target_path1
$path .= $usertoken . "-tempimg.png"; //adding your filename dynamically generated

// CHECK PERMISSIONS - Ensure the directory exists and is writable !!!!!!!!!
if (!is_dir(dirname($path))) {
    mkdir(dirname($path), 0755, true);  // Create the directory (if it doesn't exist)
}

// CHECK PERMISSIONS - Make sure the file can be overwritten !!!!!!!!!
if (file_exists($path) && !is_writable($path)) {
    chmod($path, 0666);
}

// THEN FINALIZE

// Save the image, overwriting if it exists
imagepng($temp, $path);

// Cleanup for memory saving
imagedestroy($temp);
imagedestroy($image);

It's basically your code, but improved. So in this way you check if you have permissions (hopefully so).

If you want to be sure or know what's going on, add some else with echo or returns where you see // CHECK PERMISSIONS.

Good Work

You are in general unable to use AWS services without an account since you would always need authentication for using an AWS service, alongside billing for whatever usage or expense. But, again, here's a small way one can work or interact with an AWS service either indirectly or almost without a created account directly.

1. Utilizing Third-Party Platforms Some third-party platforms offer services built on top of AWS infrastructure, which allows you to use AWS-powered functionalities without requiring direct access to AWS. Some examples include:

Heroku: A PaaS provider that uses AWS behind the scenes. You can deploy and manage applications without directly interfacing with AWS. Zapier: Automates workflows using AWS services indirectly, such as triggering an S3 event or integrating AWS functionalities with other apps. Example: You deploy a web app to Heroku, and Heroku is hosting it in AWS EC2. You don't have to go out and open an AWS account for this because Heroku handles AWS interaction.

2. Using AWS Free Services No Login Needed AWS periodically has free tools or trials that do not require an AWS account. For instance:

AWS Pricing Calculator: It's used when you want to estimate AWS costs. Public Datasets on AWS: Public datasets hosted in AWS can be accessed without an account. This might be done via an HTTP/HTTPS link. Example: Downloading a public dataset stored on Amazon S3 via a public link does not require an AWS account.

3. Collaboration via Shared Accounts If you're part of a team or organization, they can give you access to AWS services through their AWS account. They can create IAM users, roles, or federated access for you.

Example: A company is using AWS and gives you temporary credentials to access resources, like a DynamoDB table or an S3 bucket, via AWS Cognito or IAM roles.

4. AWS Lambda via API Gateways Some companies expose APIs hosted on AWS Lambda or API Gateway. You interact with AWS indirectly by calling these APIs.

Example: Using an API endpoint exposed by a developer that triggers an AWS Lambda function. You access it without needing an AWS account.

While these methods let you interact with AWS-powered features, direct access to AWS services generally requires an account due to security, billing, and resource management protocols.

https://nimbusstack.com/

Below fixed the issue for me:

• Make your copilot extension trusted check below link

https://code.visualstudio.com/docs/editor/workspace-trust

There IS a standard meaning for some codes: https://tldp.org/LDP/abs/html/exitcodes.html

n=int(input)

t=int(input()

p=[]

for m in range(t):

p.append(int(input())

s=[]

while true:

s.append(p[random.randint(1,len(p))])

if sum(s)==n:

    break

• The first line represents the sum of the integers in the list.
• The second line represents the number of elements in the list

You can do somthing like this:

export default function App() {
const example = { id: "my-class", href: "https://google.com" };

return (
    <a className="class" {...example}>
        hi
    </a>
);
}

I may be missing something but you could potentially just use unsafe block.

body {
   unsafe {
      +"<my-tag/>"
   }
}

d=int(input)

w=int(input()

h=[]

for i in range(w):

h.append(int(input())

s=[]

while true:

s.append(h[random.randint(1,len(w))])

if sum(s)==d:

    break

In CSS, @import rules must appear at the very top of your stylesheet, before any other style rules, including universal selectors like *. This is part of the CSS specification. If the @import is not at the top, it may be ignored, and your font won't load.

You can use the huggingface Clip models (open_clip just wraps around huggingface libraries anyway), which has a output_hidden_states parameter, which will return the outputs before the pooled layer.

See an example here https://github.com/huggingface/diffusers/blob/2432f80ca37f882af733244df24b46f2d447fbcf/src/diffusers/pipelines/stable_diffusion_3/pipeline_stable_diffusion_3.py#L323

I use "@types/docusign-esign" and would have

import { ApiClient, EnvelopeDefinition } from 'docusign-esign' //include everything you need

Try replacing

const env = new docusign.EnvelopeDefinition(); // Error here

with

const env = <EnvelopeDefinition>{};

The user info endpoint was incorrect. The correct one is shown below, and it works fine after the change.

Before - User info endpoint: https://login.microsoftonline.com/xxxxxxxxxxxxxxxxxx/.well-known/openid-configuration

Now - userinfo_endpoint":"https://graph.microsoft.com/oidc/userinfo

From the error its clearly shown that class NumberFormatter not found. Thats means you dont have required php extension which needed by Bagisto. Please install php-intl extension to fix this issue.

For more information, please check the documentation for requrirement, https://devdocs.bagisto.com/1.x/introduction/requirements.html#php-extensions

If you uninstalled the service properly, I think you should check the status of other services. There may be another service stuck in the "Starting" status.

I had the exact same issue. I dont know what caused Visual Studio to "forget" my naming rule, but removing it and adding it back again fixed it for me.

So:

1. Go to Options -> Text Editor -> C# -> Code Style -> Naming
2. Remove the "Private or Internal Field" naming specification
3. Click Manage naming styles
4. Remove the naming style (mine was named "_fieldName")
5. Click OK
6. Restart Visual Studio

Then open Visual Studio and add them back again

Some screenshots if you forgot how it looked like:

You can maintain a session across multiple scenarios (test cases) by using a combination of the cy.session() command and before or beforeEach hooks. The cy.session() command allows you to cache the session data and reuse it, reducing the need to log in repeatedly.

Take a look on https://docs.cypress.io/api/commands/session

According to the docs for dynamic routes, it shows you should add [name] and then reference what [name] should be in a separate property called params.

Something like below should work, if it does not please let me know and I'll try and help you from there.

<Link
  href={{
    pathname: '/[serivceName]',
    params: { serviceName: servie.name.toLowerCase() },
  }}>
    {/* Content here */}
</Link>

I think you do need a file called the name of your service or [serviceName].(jsx/tsx) for this to work, but I think you may have already done that.

What helped me was: select "Recently Used" press backspace select "Clean History" and refresh the window

k=int(input())

s=int(input())

j=[]

for e in range(s):

j.append(int(input())

q=[]

import random

while sum(q)<k:

q.append(j[random.randint(1,len(j)])

How did you find a solution for this? I'm having the same problem.

p=int(input())

f=int(input())

m=[]

for i in range(f):

m.append(int(input())

. will only match a file with the name . you need a wildcard like * to match all files https://docs.conan.io/2/reference/conanfile/attributes.html#exports-sources

Currently, Bagisto only supports Apache and Nginx. It seems you might be referring to a Raspberry Pi, but for optimal Bagisto support, you must have at least 4GB of RAM. Please refer to the following link for the full system requirements: https://devdocs.bagisto.com/2.2/introduction/requirements.html#server-configuration

I will always prefer to do with LifeCycle rules. with two main reason

1. its free of cost if you are deleting standard data with no hold flag.
2. deletion also is free NO CLASS A operation cost of 30 M Like your case gsutil dont use batch delete as per my understanding causing too much money for deletion

What web3.py version do you use?

It seems you use web3 >= v6.0.0 where deprecated camelCase methods were removed in favor of snake_case ones while your code has been written for <v6.0.0.

In this case, you should replace:

• buildTransaction with build_transaction
• getTransactionCount with get_transaction_count

Do not change swapExactETHForTokens though, as it's part of the ABI.

If your origin is a HTTP server and not S3, you need to include custom_origin_config property to your configuration to make it work. See Terraform documentation.

The Python code to print 6 is print(6), and the Javascript code to print 6 is console.log(6).

One simple solution with np.where:

for i in range(2, 4):
    df[f"V{i}"] = np.where(df["X"] == i, 9, df[f"V{i}"])

I don't know how to answer your question about it to generate types from an openapi doc. Your question about the generation of types from an openapi doc is incomprehensible and impossible.

they recoomed to use suppressHydrationWarning attribute on the html

official documentation : https://github.com/pacocoursey/next-themes

真是草了,浪费半小时都没成功.

docker run -p 8000:8000 -d --name jupyterhub quay.io/jupyterhub/jupyterhub jupyterhub

I have recently faced this issue and tried various solution. Finally following solution work :

<TextField
            sx={{
                // Fix for autofill color
                '& input:-webkit-autofill': {
                    transition:
                        'background-color 600000s 0s, color 600000s 0s'
                }
            }}
        />

I am using MUI textfield here. Hope this is usefull.

I managed to solve this by setting also the callback uri in the security matcher.

I think this should have been a comment, but i have no reputation so i can't comment.

I'm seeing the exact same issue as the OP, running python 3.12, and pysnmp 7.1.15.

One possible workaround is to wrap the snmp command in asyncio.wait_for().

    task = asyncio.create_task(
        bulk_cmd(
            snmpDispatcher,
            CommunityData("public"),
            await UdpTransportTarget.create(("127.0.0.1", 161), timeout=0.3),
            0,
            20,
            *varBinds,
        )
    )

    try:
        await asyncio.wait_for(task, timeout=10)
    except TimeoutError:
        print("Timeout")

    errorIndication, errorStatus, errorIndex, varBindTable = task.result()

This is absolutely an ugly hack.

It does do that for you. I've experienced it myself. It accepts both the numeric and string value of the enums, validates them, and handles the 400 bad request return result and error message for you. The only thing I wish it did do is provide all the valid enum values in the error message so that a developer can see what needs to change.

See this answer to practically the same question from back in 2017 which still works today on .net 8 and 9:

Best practice for passing enum params in Web API

Error 4 in Modbus Communication: This error typically represents an issue with the modbus slave or server device. It means the PLC rejected the request or could not process it.

Possible Causes and Solutions:

1. Invalid Register Address Ensure the register address you're trying to read exists.

Some devices require zero-based addressing (e.g., register 0 instead of 1).

Example:

python Copy code read_result = client.read_holding_registers(0, 1) # Try register 0 2. Wrong Register Type Confirm if the register is a holding register, input register, or other type. If it's not a holding register, use a function appropriate for your PLC: python Copy code read_result = client.read_input_registers(0, 1) # For input registers 3. Incorrect Function Code Verify that your PLC supports the function code used by read_holding_registers. 4. PLC Configuration Ensure that the PLC is configured correctly to allow reading/writing to the requested registers. Verify PLC's security settings and Modbus access permissions. 5. Test with Minimal Configuration Try reading a simple register directly with minimal configuration to isolate the issue:

python Copy code read_result = client.read_holding_registers(0, 1) if read_result: print(f"Register Value: {read_result[0]}") else: print(f"Failed to read register. Error: {client.last_error}") Let me know if further debugging steps are needed or additional error details appear!

Run: flutter clean then flutter pub get

Now debug your app.

You can open Flutter Inspector by following this steps:

1. You have to run your project first (flutter run -d chrome)
2. press Shift+Ctrl+p to open command pallete.
3. type Flutter:Open DevTools
4. you can choose Flutter:Open DevTools in Web Browser
5. connect to running app : (search the url in your flutter terminal) for example: The Flutter DevTools debugger and profiler on Chrome is available at: http://127.0.0.1:9101?uri=http://127.0.0.1:59007/18gRA86MFGU=
6. enter the url. then the flutter inspector will be shown

In 2025 I still got the same issue. Is there any available solution for that so called feature by android studio?

This is not recommended but a quick work around is to doReturn() instead of thenReturn

Sorry, I solved it by downgrading Active Choices version to 2.8.3 Plugin download address：https://updates.jenkins-ci.org/download/plugins/uno-choice/ 😂

ส่วนประกอบสำคัญของการจัดทำขึ้นเพื่อเป็นการสร้างความมั่นคง

Did you find a solution to the optimization problem?

XNET is the fastest protocol for establishing local connections. It is quicker than both TCP/IP and Named Pipes because it eliminates network overhead and employs direct memory-mapped file access.

Use diff2html-cli to export side by side diff to HTML file and view it there.

Install

npm install -g diff2html-cli

Use

git diff HEAD | diff2html -i stdin -s side -F diff.html -o stdout

Probbly you performed

 npm install ngx-turnstile --save

and then you get output something like :

which acctualy means that you need @angular/common@">=16.0.0" above or equal 16,and as i can see you are using angular 15, then you performed npm install ngx-turnstile --save --legacy-peer-deps and you imported import { NgxTurnstileModule } from "ngx-turnstile"; in modules and after you get your error.

Here is working example with angular 19 : https://stackblitz.com/edit/stackblitz-starters-l9unkwij?file=src%2Fmain.ts

In my case, the problem was that I was not on https but on http and msal requires https

While jstat in OpenJ9 may not work exactly as it does in HotSpot, OpenJ9 provides several alternative methods for monitoring memory and garbage collection, including jcmd, jvmstat, and JVM flags like -XshowSettings. You should use these OpenJ9-specific tools and options to gather memory information for your Java application.

You have 2 options for this solution, both relying to GitHub Copilot advanced features instead of GitHub Copilot built-in function

GitHub Models or Azure OpenAI API call

The GitHub Models will allow you to use Azure OpenAI via Restful, so consider if your task solving up to 50 files only or intended for more than hundreds to thousands, you probably have another choice except using LLM to automate your task. I'm not quite sure if the feature is GA yet but you may need to join the waitlist. Once you joined you can benefit all requests with no extra charge as usual when you making request to either Azure OpenAI or OpenAI, absolutely it would have some limitation but still sufficient for your task.

GitHub Copilot Workspace (Preview)

The same with GitHub Models, you may need to join waitlist. This coolest feature will help you reading GitHub repository, brainstorming your problem and generating the plan to the code. For example:

I'll pick this public repository, including folder of XML Samples https://github.com/zynksoftware/samples/tree/master/XML%20Samples

Access https://copilot-workspace.githubnext.com/ or same name Extension in VSCode, pick the repo

I will start brainstorming firstly

It will prompt to current behavior and proposed behavior by Copilot

After that, you can generate the plan

Once you feel it's ok to go, click Implementation and wait for it

Finally, create PR for all 36 files are changed, you can check more here https://github.com/zhenyuan0502/samples/pull/1/files

If you can access Copilot Workspace, check more snapshot here https://copilot-workspace.githubnext.com/zynksoftware/samples?s=fc07, from my end the website keeps loading till memory out, so maybe it would be fixed in the future for preview these files online. Whereas the VS Code can download to local with no problem occured