I suppose MS would recomment that you would use this Fluent for PowerApps, as Dynamics is PowerApps with Premium solutions added, but as of this writing, not sure if its great. Using Figma you would lay out the design and then export CSS and HTML. I think the other answers here are very good, also, using what CSS exists:
Best to migrate to twinBASIC programming. It is backwards compatible with VB6 and imports VB6 source code and forms.
Remove the form property like this.
temp->next = ptr; temp->prev=ptr; meaning of the statement(s)
import duckdb
rel = duckdb.sql('SELECT * FROM (VALUES (1, 4), (1, 2), (2, 3), (2, 4)) AS df(a, b)')
result = rel.aggregate("sum(a) AS total_sum", "b > 1")
print(result.df())
in shared librarian, under vars directory file is test.groovy
the pipeline code should start like below
def call () {
pipeline {
agent any
stages {
stage('stage_name') {
}
}
}
}
XLODBC 1 DSN=xa21;UID=XAJTDB/N3ptunE1!!;DBQ=XA21;DBA=W;APA=T;EXC=F;FEN=T;QTO=T;FRC=10;FDL=10;LOB=T;RST=T;BTD=F;BNF=F;BAM=IfAllSuccessful;NUM=NLS;DPM=F;MTS=T;MDI=F;CSR=F;FWC=F;FBS=64000;TLO=O;MLD=0;ODA=F;STE=F;TSZ=8192;AST=FLOAT;LPS=8192; SELECT(UNIT1_MW.UTCTIME+5.5/24) TIME, UNIT1_MW.VALUE UNIT1_MW, UNIT2_MW.VALUE UNIT2_MW FROM XAJTDB.TPCL_MW UNIT1_MW, XAJTDB.TPCL_MW UNIT2_MW WHERE (UNIT1_MW.POINTNUMBER=19416 AND UNIT2_MW.POINTNUMBER=19454) AND ((UNIT1_MW.UTCTIME>={ts '2025-01-01 00:30:00'}) And UNIT1_MW.UTCTIME<={ts '2025-01-02 00:30:00'}) And ((UNIT2_MW.UTCTIME>={ts '2025-01-01 00:30:00'}) And UNIT2_MW.UTCTIME<={ts '2025-01-02 00:30:00'})ORDER BY UNIT1_MW.UTCTIME
POINTNUMBER UTCTIME VALUE
Best way to modernize is to use the twinBASIC programming language. It imports VB6 source code and forms.
Would be better to migrate to the twinBASIC programming language. It is VB6 compatible so an easy migrate.
it shows that your protocols are restricted in the Sql Server Configuration Manager
Select SQL Server Network
Configuration -> Select Protocol for SQL
then check Named Pipes enabled. and also TCP/IP should be enabled.
I faced the same issue, after rebooting the router, the problem was fixed. So reboot the router and try again.
sudo apt-get update sudo apt-get install libvips42
If anyone is having this problem, then it is likely an issue with your typedef. The error says it all: somewhere there is a non-nullable field.
If you look at this user's typedef, it shows that
id: Int!
this means that id is a required field, and it must be an integer! The user then proceeds to fail to pass an Integer for the field of id. Hence, "cannot return null for non-nullable field." I don't know about every case, but I know that for me, with MongoDB, all I need to say is:
id: ID!
and something in the magical backend of mongoose takes care of populating that field with a unique ID.
That was an issue in the type definition.
And here is what the id field looks like in my Mongoose schema:
id: {
type: mongoose.Schema.Types.ObjectId,
ref: "ID",
},
That takes care of forming ID's for me.
So remember! If it "cannot return null for non-nullable field" somewhere, you are asking it to return null for a non-nullable field.
To check background processes on a computer, you can use the following methods: Using the Task Manager: Open the Task Manager (Ctrl + Shift + Esc) and go to the “Processes” tab. This view will show all the processes currently running on your computer, including those in the background
What you respond from /users is a JSON string instead of a JSON object, because of that plus the defaultContentType of GetHttpClient is 'application/json; charset=utf-8', you got null in the Flutter client.
So instead of res.status(200).send(JSON.stringify(users, null, "\t")); you could try respond the object directly res.status(200).send(users);
You must grant them View on the database.
I know it's been a while, but can you remember how did you solve it? I'm having the same error ("Failed to parse {address}") and don't know what to do.
I was able to work around these errors by first building my project that contained the irrKlang library files using Visual Studio 2022. This was done in a separate directory in a Visual Studio Project file.
To do this you'll need to know how to build sources files and link all your libraries required for your program in Visual Studio 2022. This resolved the undefined references issues for me.
Afterwards I was able to get my executable running with irrKlang playing audio by copying the executable built by Visual Studio 2022 back into my directory that contained all of the assets for my program as well as all the .DLL files needed for irrKlang, i.e. irrKlang.dll, ikpFlac.dll, ikpMP3.dll.
Guys change the boot order in the, select firmaware tab and move the DVD image to up
setTimeout(() => {
$('#projectId').val(x.projectId.toString()).trigger('change');
$('#itemType').val(x.itemType.toString()).trigger('change');
}, 10);
If the newFragment is visible over the oldFragment then you are not replacing the correct View. Try using ParentFragmentManager instead of ChildFragmentManager:
parentFragmentManager.beginTranaction.replace(container!!.id,newFragment).commit()}
The issue you're facing seems to be related to the way the input-box class is applying styles that are affecting both the placeholder and the user input text. Specifically, the -webkit-background-clip: text; and -webkit-text-fill-color: transparent; properties, which are being applied to the label, might also be affecting the input fields.
To resolve the issue, you should modify the styles specifically for the placeholder and user input text
If you are in windows below should solve the issue: Add npm global bin directory to PATH: If tsc is still not recognized, you may need to add the npm global bin directory to your system's PATH. The global bin directory is usually located at C:\Users<YourUsername>\AppData\Roaming\npm on Windows.
To add it to your PATH:
Open the Start Search, type in "env", and select "Edit the system environment variables". In the System Properties window, click on the "Environment Variables" button. In the Environment Variables window, under "System variables", find the Path variable, select it, and click "Edit". In the Edit Environment Variable window, click "New" and add the path to the npm global bin directory (C:\Users<YourUsername>\AppData\Roaming\npm). Click "OK" to close all windows. Restart your terminal: Close and reopen your terminal to apply the changes to the PATH.
So was following this post: https://discussions.unity.com/t/zwrite-in-shader-graph/752538/23
It looks i have to turn on zWrite , this is how I did it:
looks like things are working as expected now.
For others, I was getting this error. I had this in a _ViewImports.cshtml file. Turned out that I had written
@{
using class1;
}
Rewriting it as @using class1; fixed the problem.
Have a look at this other question / answer.
In principle you should have the year of first creation as also specified in this official document.
But if during a following year, you or somebody else made some relevant changes, then the license date should be update listing also the new year. To avoid having a long list of years, also a range of years can be used.
edit and save out of editor (eg. using TextEdit)
dd has this functionality built-in via conv=swab, which "swaps every pair of input bytes". It's incredibly useful if you need to convert file formats from "byte-swapped" to "big-endian" (or vice versa):
dd if=file1.v64 of=file2.z64 conv=swab
91 Club is one of the most popular online casino platforms in India, offering exciting games like Aviator, WinGo, Slots, and Color Prediction. Many players are searching for the 91 Club Hack Mod Apk to maximize their winnings and uncover hidden features. In this article, we will explore the hack mod APK, its features, risks, and how to download it safely.
The 91 Club Hack Mod Apk is a modified version of the original 91 Club app. It claims to offer features like unlimited coins, accurate predictions, and automated gameplay for games such as Big Small, Color Prediction, and Aviator. Players hope to use this APK to gain an edge and earn big rewards.
❤️ DOWNLOAD NOW 👉 https://91clubhacks.in
Follow these steps to download and install the 91 Club Hack Mod Apk:
Enable Unknown Sources:
Download the Apk:
Install the Apk:
Open and Enjoy:
Note: Always verify the authenticity of third-party APKs to avoid malware or data theft.
While using the hack mod APK sounds tempting, it comes with significant risks:
Account Ban:
Data Theft:
Malware:
Unreliable Features:
Using hack mods is against the terms and conditions of most platforms, including 91 Club. Engaging in such activities can result in legal consequences and is considered unethical. Always play fair to ensure a safe and enjoyable gaming experience.
If you’re looking to maximize your winnings legally, here are some tips:
Learn Game Strategies:
Use Referral Programs:
Play with a Budget:
The 91 Club Hack Mod Apk may promise unlimited coins and other benefits, but it comes with significant risks, including account bans and data theft. Instead of relying on hacks, focus on developing strategies, managing your finances, and using referral programs to maximize your winnings safely and legally. Always remember: Play responsibly, and play smart!
This article is for informational purposes only. We do not encourage or promote hacking, piracy, or any illegal activities. Play fair and respect the platform's rules.
One-liner options (zsh only)
for w (`<<<$things`)echo $w
for w (${(z)things})echo $w
MacOS does not support apt use homebrew instead.
For instance /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
How to Image Upload with CKeditor in Laravel 11 Tutorial CKEditor is a web-based, open-source WYSIWYG (What You See Is What You Get) editor that allows users to edit text content in a browser. It is a powerful tool that enables users to create and format text, add images and multimedia, and edit HTML code without any knowledge of coding. CKEditor was first released in 2003 and has since become a popular choice for web developers and content creators due to its versatility and ease of use. It is written in JavaScript and can be integrated into any web application with ease. Read Full Tutorial
This issue arises because Scanner.next() only reads until the next white space. When you press the enter after entering an invalid input, the newline character remains buffer. On the next iteration, next() might pick it up
And you use the scanner.nextLine() to clear the buffer introduces a new line in the output
Use df.at for single-cell assignments: This method avoids ambiguity and is efficient for scalar updates.
df.loc is better for bulk operations: Use it when updating multiple cells at once or for filtering.
The issue doesn't occur when the DataFrame is simple (e.g., no join), as the structure is straightforward.
it is very useful for me to slove my training problem
Add toString() and override function in the model object will resolve this issue
When navigating between /listing/1 and /listing/2, expo-router may replace the current route in the history stack instead of adding a new entry.
This happens because the route paths only differ by a dynamic id, which some configurations may treat as a single screen.
so When router.back() is called, it looks at the history stack. If the navigation history only has /home or /listing/2 (replacing /listing/1), it will go back to /home.
To avoid it u can use router.push(/whatever) to the stack. instead of router.replace(/whatever).
const navigateToListing = (id) => {
const router = useRouter();
router.push(`/listing/${id}`);
};
I don't have enough credits to add a comment but @volkeshculz - this plugin is the only thing that worked for me. PHP-FPM 8.4. Thanks!
685864yuf*jhjgj*
sewd you fol value huou tuis hayu fumd }hgf{ gfd] ghgf-gh--+hg bls caixa loteria/gdfenter link description here
Key Adjustments:
Add Identity Permutation: Manually include the identity permutation in the list of permutations using all_permutations.append(identity_perm).
Iterate Smoothly: Ensure the iteration through Sk properly accounts for the identity permutation, eliminating any potential index errors.
By doing this, the identity permutation becomes a regular part of Sk, so you won’t need to handle it separately.
After many times of being annoyed by this specification, I finally created an extension.
You can use it if you like. You can git add from the command palette.
You can also git add from the explorer context menu. This means that you can also git add a folder.
For me, I was building on the Apple M2 chip. After several hours of attempts, I found that I could successfully build on a real device, but the build failed on the simulator. When I commented out the following code, the build also succeeded on the simulator.
# https://stackoverflow.com/questions/72344149/how-to-solve-xcode-build-error-undefined-symbols-for-architecture-x86-64
# Comment this line due to a build failure on Apple M2 Pro with an error: "VisionCamera.modulemap not found."
# config.build_settings['EXCLUDED_ARCHS[sdk=iphonesimulator*]'] = "arm64"
close Xcode
rm -rf ~/Library/Developer/Xcode/DerivedData/* && rm -rf ~/Library/Caches/org.swift.swiftpm
start Xcode
Drag and move your svg or jpeg file in which the image is in the same folder or same sub-folder as your html file, browser is not able to search the path or location of file and hence show - file not found when you inspect the url, you can also read the error message. I did this and my code worked.
passenger start --instance-registry-dir /tmp
I used yarn build and it works,thank you so much
I had same issue, but it worked when i replaced the the fucntion createEmailSession with createEmailPasswordSession.
Create Custom Middleware in Laravel Laravel middleware is a mechanism that filters HTTP requests entering your application. It sits between the request and the application’s core, allowing you to intercept, modify, or reject requests based on certain conditions. Middleware can be used for tasks like authentication, logging, and request manipulation. It provides a flexible way to handle cross-cutting concerns in your application’s HTTP lifecycle, ensuring clean and modular code organization. Read More
I've been having the same issue for a bit in PyCharm. The solution is quite odd, simply install keras as a package by itself, and then replace imports to import tensorflow.keras to keras.api and it will compile just fine.
Would appreciate it if anyone could give further explanation as to why this works..
JanVerbeke, your approach of either using a table alias or the actual tableName.field works. However, the challenging I am having is when I want to do this dynamically and my frontend doesn't have any idea of the tableName.fieldName but rather the fieldName only. I have a DTO object that contains all the fields I am exposing to the frontend which I want to use for sorting on both the frontend and the backend but due to nested associations I have, I can't get this to work.
Any suggestions will be appreciated.
Could you please try this? Extract it and use the dlls in bin folder.
Also, you can try delete dbgcore.dll and dbghelp.dll, and check your PATH envvar to find if there's another dbgcore.dll on your computer that would result in a 'DLL Hell'.
I faced the same problem on my Mac today. I also noticed, that Docker didn't work at all. The fix that worked for me was completely removing Docker Desktop from my Mac and reinstalling a fresh version of it. I use Homebrew for Docker Desktop, so there might have been an issue with some upgrades.
I am having the same issue. In my case, a Raspberry Pi 2B was running Jessie. I wrote a PHP program accessing two solar charger controllers. It has worked since 2018.
The 2B's SD card crashed. I can not rebuild a card for Jessie, so now I am running Bookwork. The Modbus commands fail. I get the "Watchdog time expired [ 5 sec]!!! Connection to 192.168.1.1 is not established." error.
Any suggestions?
The Creative Pencil एक क्रिएटिव ड्रॉइंग चैनल है जहाँ आपको बेहतरीन आर्टवर्क देखने को मिलते हैं। इस बार मैं अपने चैनल पर भगवान कृष्ण का एक खास आर्टवर्क लेकर आ रहा हूँ। उनकी दिव्य छवि और आशीर्वाद को पेंसिल आर्ट के ज़रिए दर्शाने की कोशिश की है। अगर आपको आर्ट और क्रिएटिविटी पसंद है, तो चैनल को ज़रूर विजिट करें और सपोर्ट करें!
To what extent did your parents encourage you to pursue a career in nursing.
The FirstPersonController comes with its own "Cursor" as a crosshair kind of thing. You can change it by doing player.cursor.color or .scale or whatever you need to do with it. You can even change the texture or whatever you need.
Here is the documentation for the FirstPersonController
https://www.ursinaengine.org/api_reference.html#FirstPersonController
Here is the discord if you need any more help
Not ideal but does exactly what is wanted:
git commit -p small change (along with already staged changes)git stashgit reset HEAD^git commit -p small changegit add -ugit stash popWe end up where we started, with the same material staged and unstaged, except the small change is committed.
I know this question is old, but I just came across the same problem. While the solution from This answer did not work directly, I just tried setting the config http-host=127.0.0.1 (not publically documented) in keycloak.conf and it seems to work for me. Probably also works equally using keycloaks other config variants. If I were to guess, keycloak manually overrides quarkus.http.host with its own internal default.
I found below link helpful:
In short: Navigate in the console to "Spot Requests" and then: "actions" --> "cancel request".
It's used to collapse sections of code for better readability, it's especially useful when dealing with long code blocks. Here's an example:
You can specify the version of dart to use in pubspec.yaml:
environment:
sdk: '>=3.6.0 <4.0.0'
Self plug: I wrote a library to do this because TC39 recently abandoned the proposal to introduce it: https://www.npmjs.com/package/@nano-utils/op
User-side looks like:
import { op } from '@nano-utils/op';
class Vector {
constructor(...elems) {
this.arr = elems;
}
'operator+'(other) {
return new Vector(...this.arr.map((e, i) => e + other.arr[i]));
}
}
const a = new Vector(1, 2),
b = new Vector(3, 4);
console.log(op`${a} + ${b}`); // -> Vector(4, 6)
data = {'a': [3, 2], 'b': [[4], [7, 2]]}
df = pd.DataFrame(data)
df['c'] = df.apply(lambda row: [row['a'] * x for x in row['b']]**, axis=1**)
I had the same problem: post such upgrade, War was up but not running.
"Step -1 (minus 1): Do not replace all javax to jakarta"
It looks like you did replace also to javax.ws.rs
Good luck
Did you really say list of tuples by list comprehension? Okay, you're supposed to have it if you really, really have to:
n=3783780 # e.g.
print(
[(k,v)for k,v in{k:l.count(k)for l in[(lambda f,p,i:[]if i<p else f(f,p+1,i)if i%p else[p]+f(f,p,i/p))(lambda g,q,j:[]if j<q else g(g,q+1,j)if j%q else[q]+g(g,q,j/q),2,n)]for k in l}.items()]
)
It could probably be written a little shorter. Here the core is a list of prime factors (I had that written earlier), and that was just modified into tuples of prime+exponent pairs. It would be better to generate the desired pairs directly and put them as tuples in a list, or at least in a dict and then convert that to a list.
I believe I have it figured out:
def plot2(scores, mean_scores, times, mean_times):
display.clear_output(wait=True)
display.display(plt.gcf())
plt.clf()
plt.title('Some Titile')
plt.xlabel('Number of games')
plt.ylabel('Score')
ax1 = plt.gca()
ax2 = ax1.twinx()
ax2.plot(times)
ax2.plot(mean_times)
ax2.set_ylabel('Game Time')
plt.plot(scores)
plt.plot(mean_scores)
plt.ylim(ymin=0)
plt.text(len(scores)-1, scores[-1], str(scores[-1]))
plt.text(len(mean_scores)-1, mean_scores[-1], str(mean_scores[-1]))
plt.show()
plt.pause(0.1)
I had a similar issue. Support for Blazor WebAssembly projects isn't in Aspire yet. It's because Aspire has no way to pass the service discovery information to the client application except over HTTP.
I made a Nuget package that passes the service discovery information from the AppHost to the client by writing it to the client's appsettings.json files. Hopefully one day the feature will be baked into Aspire.
The package is here: https://www.nuget.org/packages/Aspire4Wasm/#readme-body-tab
The GitHub source repo is here: https://github.com/BenjaminCharlton/Aspire4Wasm/blob/master/README.md (If you would like to contribute improvements please send me a pull request!)
You use it like this:
Example Program.cs in AppHost
var builder = DistributedApplication.CreateBuilder(args);
var inventoryApi = builder.AddProject<Projects.AspNetCoreWebApi>("inventoryapi");
var billingApi = builder.AddProject<Projects.SomeOtherWebApi>("billingapi");
builder.AddProject<Projects.Blazor>("blazorServer")
.AddWebAssemblyClient<Projects.Blazor_Client>("blazorWasmClient")
.WithReference(inventoryApi)
.WithReference(billingApi);
builder.Build().Run();
Example Program.cs in your Blazor WebAssembly Client
Install (on the WebAssembly client) the Microsoft.Extensions.ServiceDiscovery Nuget package to get the official Aspire service discovery functionality that is going to read your resource information from your app settings.
builder.Services.AddServiceDiscovery();
builder.Services.ConfigureHttpClientDefaults(static http =>
{
http.AddServiceDiscovery();
});
builder.Services.AddHttpClient<IInventoryService, InventoryService>(
client =>
{
client.BaseAddress = new Uri("https+http://inventoryapi");
});
builder.Services.AddHttpClient<IBillingService, BillingService>(
client =>
{
client.BaseAddress = new Uri("https+http://billingapi");
});
I hope it solves your problem.
I just installed VS2022 on Windows10, and didn't know that I had to install Windows 11 SDK. I got the ctype.h error.
I did a search on the laptop for Visual Studio Installer, ran it, hit Modify, and checked Windows 11 SDK (10.0.22621.0). Then I could build and run C++ solution.
Can someone advise how to block or prevent this? illegalwebsite.com is hiding behind Cloudflare, so I cannot see their host IP.
If you go to Dashboard > Websites > Add a domain as if you would add a domain for your self, and you place there the "illegalwebsite.com" domain, Cloudflare will show you the A record with the IP address (I know, is weird, but that's how it works CF, even with our domains) along with all the other records. You can move from there to understand what is going on.
Ciao!
I had the same problem, on localhost I could access mongodb atlas, when I accessed it on another computer it gave me this error, I was able to solve it by changing the axios url, instead of leaving localhost I gave the IP of the computer that is running the server type http:/ /localhost:3000 moved to http:192.168.1.2:3000. That resolved it.
I have found an answer: Turn off "Enable Chrome V8 runtime" for your Apps Script. When this is enabled the failure occurs within 10 transactions, often within the first 3. When this is disabled I have run 400 transactions without a single failure.
After changing this setting you will need to Deploy your script again, even though you have not changed any code.
Yes, find the CUDA version with nvcc --version and run pip install cupy-cuda{major_version}x.
lrx!
My goal is to host this second Wordpress website on https://domain/myfolder.
...
I am able to redirect subdomain.domain.com to https://domain/myfolder but then I get a 404 error...
I think this is because this URL structure can be either for a normal page/post URL or sub-directory subsite URL in a WordPress multisite installation (which is actually and easily supported by Runcloud - though dealing with WP multisite on subdirectories is trickier than multisite on some domains).
I have many WP single sites and several multisites on Runcloud, and I will encourage you to reflect on the goals you are trying to achieve, because what you are saying you're trying to do is unusual and maybe a little bit hacky (although I admit I've tried to do it when I started dealing with the WP beast, around 13 years ago).
You'd better open a ticket on Runcloud and they will answer promptly and quickly, as they usually do.
God bless!
I had a similar issue, and contacted twilio. It turns out the connect to stripe button in twilio console does not currently work. Twilio is unable to get the OAuth Token From Stripe, and they are working on this issue. https://status.twilio.com/incidents/21lnz91yrxpv
Based on your description and the provided code, the issue seems to lie in the configuration or the connection process itself rather than with the Oracle database services since SQL Developer can successfully connect. Here are some steps to diagnose and resolve the issue:
Ensure your DBConnection connection string in the configuration file (e.g., App.config or Web.config) is correct. The connection string for Oracle typically looks like:
<connectionStrings>
<add name="DBConnection"
connectionString="User Id=<username>;Password=<password>;Data Source=<datasource>"
providerName="Oracle.ManagedDataAccess.Client" />
</connectionStrings>
Replace <username> and <password> with the correct Oracle credentials.
Replace <datasource> with the appropriate Oracle Data Source, such as:
hostname:port/service_name
localhost:1521/XEPDB1tnsnames.ora.Ensure you have the Oracle.ManagedDataAccess NuGet package installed in your project. It can be added using:
dotnet add package Oracle.ManagedDataAccess
Make sure the version of this library is compatible with the Oracle database version.
Update the catch block in your constructor and log detailed exception information:
catch (OracleException oracleEx)
{
Console.WriteLine($"OracleException: {oracleEx.Message}");
Console.WriteLine($"Error Code: {oracleEx.ErrorCode}");
Console.WriteLine($"Stack Trace: {oracleEx.StackTrace}");
}
catch (Exception ex)
{
Console.WriteLine($"General Exception: {ex.Message}");
Console.WriteLine($"Stack Trace: {ex.StackTrace}");
}
This will provide more specific details about why the connection fails.
Check TNS Listener: Use the tnsping command to verify the Oracle listener is reachable.
tnsping <datasource>
Replace <datasource> with your TNS alias or hostname.
Firewall: Ensure no firewall rules block the connection on port 1521 (or the port used by Oracle).
Try connecting with a minimal example to isolate the problem:
using Oracle.ManagedDataAccess.Client;
class TestOracleConnection
{
static void Main(string[] args)
{
string connectionString = "User Id=<username>;Password=<password>;Data Source=<datasource>";
try
{
using (var connection = new OracleConnection(connectionString))
{
connection.Open();
Console.WriteLine("Connection successful!");
}
}
catch (Exception ex)
{
Console.WriteLine($"Error: {ex.Message}");
}
}
}
If the database connection is slow, increase the Connection Timeout in the connection string:
<add name="DBConnection"
connectionString="User Id=<username>;Password=<password>;Data Source=<datasource>;Connection Timeout=60"
providerName="Oracle.ManagedDataAccess.Client" />
The Dispose method in your DBManager class is not implemented. Ensure proper disposal of resources:
public void Dispose()
{
if (_connection != null)
{
if (_connection.State != ConnectionState.Closed)
{
_connection.Close();
}
_connection.Dispose();
_connection = null;
}
}
Sometimes, mismatches in versions can cause issues. Verify the correct version of Oracle.ManagedDataAccess assembly is loaded using:
Console.WriteLine(typeof(OracleConnection).Assembly.FullName);
Look at the Oracle Database logs for any relevant errors, or enable tracing for your Oracle client to gather more information.
If none of the above resolves the issue, please share the exact error message and stack trace for further assistance.
Just use this and your GUI will close only after you click on the window.
win.exitonclick()
Just for completeness:
alik@linux:~/people/didalik/dak/cd/ci(main)$cat << HD | cat
> This works too.
>
> Cheers,
>
> Дід Alik
> HD
This works too.
Cheers,
Дід Alik
alik@linux:~/people/didalik/dak/cd/ci(main)$
Flexibility!
After turning off SIP (System Integrity Protection) everything worked.
As a general rule, in order to redirect ALL the traffic of your www.somnovozamcan.eu to your main site somnovozamcan.eu (called Canonical URL) you have to do it via the DNS settings of your domain: Record type: CNAME Name: www Target: somnovozamcan.eu. Is as simple as that, if you have access to your domain DNS.
Maybe, since you are using a shared hosting - and perhaps they are holding you from your DNS settings - you should find some settings on your admin/control panel.
BUT, all that said with an important CAVEAT and WARNING (precisely because you're using a shared hosting service): since you have your site on a "www" subdomain, that means all your files (let apart the database) are stored in a precise folder of your shared hosting provider's server. That said, before making any intervention, you should know your website situation, and the best way to do this is to ask your hosting provider.
Take care.
ScheduledTaskRegistrar can be used in that way (Spring Boot version 3.4.1):
import org.springframework.context.annotation.Configuration;
import org.springframework.lang.NonNull;
import org.springframework.scheduling.annotation.EnableScheduling;
import org.springframework.scheduling.config.ScheduledTaskRegistrar;
import org.springframework.scheduling.Trigger;
import org.springframework.scheduling.TriggerContext;
import org.springframework.scheduling.support.CronTrigger;
import java.time.Instant;
import java.time.LocalDateTime;
import java.time.format.DateTimeFormatter;
import java.util.concurrent.Executor;
import java.util.concurrent.Executors;
@Configuration
@EnableScheduling
public class SchedulingConfig implements org.springframework.scheduling.annotation.SchedulingConfigurer {
private final CustomCronTrigger customCronTrigger = new CustomCronTrigger("0/10 * * * * ?"); // Runs every 10 seconds.
@Override
public void configureTasks(ScheduledTaskRegistrar taskRegistrar) {
taskRegistrar.setScheduler(taskScheduler());
taskRegistrar.addTriggerTask(
new Runnable() {
@Override
public void run() {
LocalDateTime scheduledTime = customCronTrigger.getScheduledTime();
System.out.println("Method was scheduled at: " + scheduledTime.format(DateTimeFormatter.ofPattern("yyyy-MM-dd HH:mm:ss")));
}
},
customCronTrigger
);
}
public Executor taskScheduler() {
return Executors.newScheduledThreadPool(1); // Use the executor of your liking.
}
class CustomCronTrigger implements Trigger {
private LocalDateTime scheduledTime;
private final CronTrigger cronTrigger;
public CustomCronTrigger(String cronExpression) {
this.cronTrigger = new CronTrigger(cronExpression);
}
public LocalDateTime getScheduledTime() {
return scheduledTime;
}
@Override
public Instant nextExecution(@NonNull TriggerContext triggerContext) {
Instant nextExecutionInstant = cronTrigger.nextExecution(triggerContext);
if (nextExecutionInstant != null) {
scheduledTime = nextExecutionInstant.atZone(java.time.ZoneId.systemDefault()).toLocalDateTime();
}
return nextExecutionInstant;
}
}
}
Output:
2025-01-12T00:56:04.804+0200 INFO Initializing ProtocolHandler ["http-nio-8080"]
2025-01-12T00:56:04.805+0200 INFO Starting service [Tomcat]
2025-01-12T00:56:04.805+0200 INFO Starting Servlet engine: [Apache Tomcat/10.1.34]
2025-01-12T00:56:04.825+0200 INFO Initializing Spring embedded WebApplicationContext
2025-01-12T00:56:04.827+0200 INFO Root WebApplicationContext: initialization completed in 398 ms
2025-01-12T00:56:05.033+0200 INFO Starting ProtocolHandler ["http-nio-8080"]
2025-01-12T00:56:05.043+0200 INFO Tomcat started on port 8080 (http) with context path '/'
2025-01-12T00:56:05.050+0200 INFO Started CrudCoreApplication in 0.847 seconds (process running for 1.127)
Method was scheduled at: 2025-01-12 00:56:10
Method was scheduled at: 2025-01-12 00:56:20
Method was scheduled at: 2025-01-12 00:56:30
Please move CustomCronTrigger in a separate class file, and if possible for Runnable as well, to have better organization of code. The class and runnable are provided as such for demonstration purposes of the answer.
Out of curiosity, why do you need to be that exact though?
Try to install this library manually, works for me https://www.npmjs.com/package/@splinetool/runtime
Have you find out how to do that?
For those who are not able to get a correct HH:mm:ss format from java.sql.Date, just set it as java.sql.Timestamp in field class type.
I literally don’t have words… this is some sick twisted (pun intended) shit going on. Gas lighting, preventing people from living their lives with freewill and using them as test subjects 24/7 is wrong. And beyond this, to abuse and hurt people just because you think u can hide behind a screen and not get caught is the most disturbing part of this. Time (lol) to get RIGHT… (not left)… wait switch? No thanks. Seriously u need to look into this because it’s the most fucked up situation in a long time. My name is Kelly lucido. I live in Carmel, ca and I am 38 years old.
For persistent occurrence of this error, you may need to clear your cache
expo start -c
Hola que tal prueba con newDevice.register() despues de haber creado la instancia :D espero te funcione!
If you have a custom validation, you have to add this in your javascript script once your field is filled out correctly =>
YOUR_FIELD.setCustomValidity('');
1.) run the touch command followed by the name of the file : 2.) $ touch main.rs 3.) $ ls main.rs 4.) open VS > open file main.rs
Solved by bsimmo over at Github
i was able to add the SMTP env variables in the docker compose file under
x-airflow-common:
environment:
FYI, airflow has a default connection_id 'smtp_default' that can be edited with the user account credentials. You can also refer to the other ways I tried to test in this answer link airflow smtp not working with docker - section/key [smtp/smtp_user] not found in config / OSError: [Errno 99] Cannot assign requested address
Also as an alternative, you can send email by using python's smtplib in a PythonOperator callable function refer https://docs.python.org/3/library/email.examples.html
Answering my own question here: had to compile GLFW myself, then compile using gcc instead of gcc -x c++, THEN add -lgdi32 to the compile instruction. This has solved the issue for me on on two separate machines. Thanks to @drescherjm, @Alan Birtles, and @Brecht Sanders for their help resolving the issue.
Problem was in home controller
@RestController
public class HomeController {
@RequestMapping("/{path:[^\\.]*}")
public String redirectToReact() {
return "forward:/index.html";
}
}
that was blocking requests from websocket, so if you should check if u have the same thing if u got the same problem
Mines says failed to parse lock file at my directory then caused by "lock file version 4 requires -Znext-lockfile-bump"
I faced the same problem, and since there wasn't a solution available, I decided to create a package: https://github.com/dazza-dev/Laravel-Batch-Validation that solves it. This is the first version, so it may have some bugs, but it would be great if you could try it out and help improve it further. It works well for my use case, but I hope it can be helpful to the Laravel community.
shut up old manshut up old manshut up old manshut up old manshut up old manshut up old manshut up old man
Not the best, but. Formula in B3 dragged right:
=LET(a,TAKE(FILTER($A$2:A2,$A$1:A1=1),1,-3),IF(COUNTA(a)>=3,SUM(a),0))
Result:
In my case the webserver in the EC2 was not running, I had to log in to the instance
Just missing the Initialized notification, which comes immediately after the initialize response is received.
{
"jsonrpc": "2.0",
"method": "initialized",
"params": {}
}
Incidentally the idea that sending and receiving notifications 1 at a time is always the case is a mistake, e.g.
src: https://iwanabethatguy.github.io/language-server-protocol-inspector/
The problem solved (after explore django source code): The permissions field in AbstractGroup model must have related_query_name as "group".
class AbstractGroup(models.Model):
name = models.CharField(_("name"), max_length=150, unique=True)
permissions = models.ManyToManyField(
Permission,
verbose_name=_("permissions"),
blank=True,
related_name="custom_group",
related_query_name="group",
)
...
Thanks.
After a not-so-short research, I found that my problem is actually (almost) the same as the uniform-machines scheduling problem that is formulated in the context of computer task scheduling. In stead of assigning packages to couriers, the uniform-machines scheduling assigns tasks to processors. To my surprise, the problem is much more difficult than I expected. For those who want to learn more about the problem, please refer to the wiki and the paper Exact and Approximate Algorithms for Scheduling Nonidentical Processors. Many thanks to @bsraskr .
A)A short-short answer is : in some file like
x:\MSYS2\home\some_name\.bash_profile ,
add these lines:
# ---- modify : j is j-Windows drive
tt=/j/MSYS2/mingw64/bin
PATH="${tt}:${PATH}"
B)A short answer is : in some file like
x:\MSYS2\home\some_name\.bash_profile ,
add these lines:
# pathz was defined in Windows using e.g. set pathz=%cd% before loading MSYS2
# You can also set it here (in Windows-format like 'c:\my\bin)
tt="${pathz}"
tt=\/"${tt}"
tt="${tt/:/}"
tt="${tt//\\//}"
PATH="${tt}:${PATH}"
# ---- modify these 2 lines :
mkdir -p "${tt}"/../2WORK
cd "${tt}"/../2WORK
#some tests :
input="a\b\c\d"
echo ${input}
echo "${input/\\//}"
echo "${input//\\//}"
echo "Note that : only the last echo with '//', not '/', to begin, give us global replace !!"
C)An instructive answer is :
1)Create a dir . In this dir, create a file named qqq.cmd that contains :
rem cd = current dir
set pathz=%cd%
set path=%pathz%;%path%
set pathzz=%path%
:: pathz and pathzz can be used in cygwin and MSYS2 , but must be translated.
if "%1" == "" (
rem ---- modify this line :
I:\MSYS2\msys2_shell.cmd -ucrt64
exit
)
set ZZZZZZ=123aBBC1111111111111
set zZZz=123aBBC
rem ---- modify this line :
I:\CYG\bin\mintty.exe -i /Cygwin-Terminal.ico -
exit
2)In this dir, create another file named ss that contains :
#ss
#in notepad++ : click Edit , choose EOL conversion , then choose unix for this file ss. (no extension).
echo $PATH
echo $path"assss----------"
echo $ZZZZZZ
echo $zZZz
echo $ZZZZ--=====++++++
echo $zZZz
echo $PATHZ --------
echo $pathz --====
cd /c
echo --------Note current dir :
pwd
if false; then
# ... Code I want to skip here ...
fdsgfsdsgfs
dfsdgfdsgfds
fi
exit
3)Do as in B) .
4)Create shortcut for qqq.cmd and move the short cut to any where.
5)Then execute qqq.cmd by double clicking the shortcut and now you have MSYS2. Type ss and check the output and note the current dir now!!
NB: if you modify qqq.cmd to load Cygwin then 3) above not needed