Unfortunately you did not show, what were your attempts with CTE.

With cascading/nesting some CTEs it could be solved:

What about this:

WITH groupLimits AS ( -- all places where neighboring rows change (col2 in (1,3) vs. col2 not in (1,3))
    SELECT A.Record_Number arn, A.Col1 ac1, A.Col2 ac2,
           B.Record_Number brn, B.Col1 bc1, B.Col2 bc2,
           CASE WHEN A.Col2 IN (1, 3) THEN 1 ELSE 0 END ain,
           CASE WHEN B.Col2 IN (1, 3) THEN 1 ELSE 0 END bin
    FROM tbl1 A
    JOIN tbl2 B
      ON A.Record_Number + 1 = B.Record_Number
         AND (
               (A.Col2 IN (1, 3) AND B.Col2 NOT IN (1, 3))
               OR
               (A.Col2 NOT IN (1, 3) AND B.Col2 IN (1, 3))
             )
    order by A.Record_Number
), groups as (
   select ...
   from groupLimits C
   join groupLimits D
     on ...
...
select ...
...

With above groupLimits you get the idea where groups of (neighbor) rows, that have the same condition, either Col2 IN (1, 3) or Col2 NOT IN (1, 3) end (even if the group contains only 1 row).

The (neighboring) entries of groupLimits could be joined again with each other to get the minimum and maximum record_number of a group of tbl1 entries, that have all either Col2 IN (1, 3) or Col2 NOT IN (1, 3) (ain, bin can help). Perhaps you have to add an additional entry for first and last of record_number in tbl1.

Then you can calculate the col3 value for a group of rows with Col2 NOT IN (1, 3) (e. g. record_number 3 and 4), that is the value of record_number 2 (before 3) = 456. The col3 value for all records in a group with rows with Col2 IN (1, 3) is anyway its col1 value and easy to handle.

Are these enough ideas/hints to solve it?

Error code 5.7.57 in a non-delivery report (also known as an NDR, bounce message, delivery status notification, or DSN). This bounce message indicates a problem in the configuration of the connecting application or device.

Some things you could check:

• Triple-check the email/password.

• Change password - it could be that the password is "corrupted" or "prematurely expired".

• Turn on SMTP for the sending email account.

• Multi-Factor Authentication is turned "OFF" for the sending email account.

Things to try:

• Use the Microsoft 365 admin center to enable or disable SMTP AUTH on specific mailboxes.

• A DMARC reporting service is very helpful for identifying email sources and SPF failures for the domain. Ensure you are properly setting up SPF and DMARC.

• You may try to enable network tracing. Review Network Tracing in the .NET Framework to see if it gives any additional information.

Troubleshooting & workarounds shared by the community members and external support:

• 5.7.57 SMTP - Client was not authenticated - some answers are dated but could still be applicable.

• SMTP Authentication Failure - 5.7.57

• Other related questions

I have found that casting to numeric with scale 2 then casting back to float works best.

`SELECT

j.job_title,

AVG(j.salary)::NUMERIC(10,2)::FLOAT as average_salary,

COUNT(p.id) as total_people,

SUM(j.salary)::NUMERIC(10,2)::FLOAT as total_salary

FROM people p

JOIN job j

ON p.id = j.people_id

GROUP BY j.job_title;`

The official github repository of the spring framework contains a migration guide from 5.3 to 6.x. If you aren't on 5.3, then you have to read the other migration guide from 5.x to 5.3 first.

If it doesn't mention anything about the XML, then it should be fine, but keep a backup of your code base just in case (e.g. VCS or copying to another directory)

Without knowing more about your dependent variable, population sizes, etc. this response will be a little generic, and I am no expert in R.

Tests make assumptions about your data and the relationships between the dependent and independent variables. In this case linearity. You can independently evaluate what that non-linearity is, so that you can better understand it and determine what impact it will have on the assumptions of your model. It may lead you to conclude that a higher order polynomial will capture that non-linearity accurately or it may even indicate that regression is not an appropriate model.

Instead of a higher order polynomial you could explore your data using a spline. Piecewise cubic splines are commonly used in finance to fit curves. This [article] (https://www.nature.com/articles/s41409-019-0679-x) provides more information for clinicians.

1. The test_size = 0.25 don't really have an impact on the metrics I think. But you're model is too good probably because the function that the label follows is very simple. So your Adaboost don't need more than a DecisionTree(depth=1) to learn that function. But, you're probably using the same name y_pred in all the code and thus, y_pred should be actualized when you make any changes on the model or on the test dataset. The test_size actually modifies the length of the test dataset and the previous length was 25% of the total size of the dataset. If you modify the test_size, you modify that test dataset and you need to actualize y_pred with adb.predict(X_test) both for having new prediction matching with new datapoints, and not have a mismatch error.

2. To fix the issue, you just need to to add before using any function that needs y_test and y_pred : y_pred = adb.predict(X_test)

enter image description here

I have the same problem, but the problem occurs before inserting the data to the database, Entity Framework is creating a query that truncates the string, the string is complete when calling the SaveChanges() method, but after checking the database logs, the query that Entity Framework creates, the string is truncated. I already set the parameters needed for Entity Framework to use the same values for the field in the database, which is a VARCHAR(MAX) field. I don't know what else to do, the string is always complete in my code, but Entity Framework keeps truncating it, and I don't have control over it.

Use printf with the %V format specifier.

printf "%V\n%V\n%V\n", var1, var2, var3

CSnakes provides a new potential answer to this. Their docs include a discussion on efficient sharing of buffers. It's Python-centric, in that it allows C# Span "views" into native NumPy arrays.

You have confluent Snowflake connections that simply provide the JSON data; implementing a Snowflake stored procedure to create the tables or merging the tables is a possibility, and the materialized views are often built on the JSON structure.

I think the appropriate solution here has two parts:

1. For working with Adobe Premier, you most likely need local VM storage. There are different tiers, with HDD being the cheapest and Premium SSD being the most expensive which is probably worthwhile. I would try using an HDD and see if that works well enough. https://learn.microsoft.com/en-us/azure/virtual-machines/disks-types
2. Your web all use case is a different story. That should use blob storage to store data, that will be much easier to work with in the case of a web app. And I assume that a web app is not going to use the files in the same way that Premier will, or even the same files, is that right?

If you really want to re-use blob storage on both the VM and for the web app, you would need to make the blob storage container look like a source accessible natively to Premier running on Windows, using something like this solution here: https://www.msp360.com/drive/microsoft-azure/

The solution I came up with was to modularize the CKEditor into a child component, in which I import the library using dynamic. Then, in the parent component, I import this child component, also using dynamic.

Also, I used a personalized build created in ckeditor builder.

This typically happens on a device/emulator if you haven't logged in to a Google account in the Play Store/Chrome. Make sure your emulator has Google Play store, login to a Google account by opening chrome or Play Store and then run your app again to see if it works.

try pip3 install PyQt5 , its work for me

I used the recorder to get this code, and it seems to work?

function main(workbook: ExcelScript.Workbook) {
    let selectedSheet = workbook.getActiveWorksheet();
    
    // Set range A1:B3 on selectedSheet
    selectedSheet.getRange("A1:B3").setValues([["A",1],["B",2],["C",3]]);

    // Insert chart on sheet selectedSheet
    let chart_1 = selectedSheet.addChart(ExcelScript.ChartType.columnClustered, selectedSheet.getRange("A1:B3"));

    // Change fill color for point on series on chart chart_1
    chart_1.getSeries()[0].getPoints()[0].getFormat().getFill().setSolidColor("ffc000");
}

I am also facing the same issue.

I found the solution. I needed to add at the end of the code.

Response.Headers.Add("Location", session.Url);

I have been dealing with the same issue and found the solution on https://furnacecreek.org/blog/2024-12-07-centering-nswindows-with-nshostingcontrollers-on-sequoia

Here is the OP's sample code with the one line fix added:

let contentView = WelcomeView()
let hostingVC = NSHostingController(rootView: contentView)
onboardWindow?.contentViewController = hostingVC
onboardWindow?.updateConstraintsIfNeeded() // fixes zero size issue

I came to this old question out of frustration after having done optimisation of the rails assets pipeline the whole day. It turns out it doesn't matter what rails version or any other gem you use - if you have activated the throttle function in the browser.

I'm using chrome and for some reason I managed to activate the throttling function used to simulate slow web connections. Check that as one debugging step in your browser.

cant you just use a when clicked block

I think it will be necessary for Apple Developers to know this because Wise Support doesn't know how to fill out the correct data.

Checked Source Code I get format Account Number Format: ###-#######-## (12 numbers from IBAN)

Programmable configuration registers are addressed with pointer variables. The programmer must take additional steps:

1. The address range should be flagged write-through (not cached.) This is NOT a language convention, this is done with supportive libraries.

2. If the register is both written, and then subsequently READ then the pointer should be flagged as "volatile" telling the compiler "do NOT perform optimizations that avoid reading this value from memory."

ttf font files are now widely supported, so you should be safe using your custom font. In case your font doesn't load, you can also set a fallback in your CSS:

p {
  font-family: 'Custom', Arial, sans-serif;
}

To answer the original question asked, which is actually achievable. There are several steps needed. For educational research, just go to my repository: https://github.com/Rythorian77/Microsoft-SafeGuard/blob/main/Microsoft%20SafeGuard/Form1.vb

I'm running into similar issues. I understand, @davidfowl, that Aspirate doesn't understand Azure resources. But some kind of supporting documentation to help us get through what is a very simple example would be nice.

I'm trying to build/deploy a .NET Orleans app with Aspire that is leveraging Blob/Table storage as the clustering/grain-state.

When deploying my project via Aspirate, I do get a bicep file for my storage account, but it doesn't appear to be executed as a part of the deployment.

When attempting to deploy via azd, it appears that my only option is to deploy to a Container Apps instance.

I've also attempted to do two separate deployments but continue to run into major problems.

1. The storage account's name is a unique id generated from the resource group name. It is not clear how to pass the storage account's resource group name into the configuration settings for my Aspire AppHost so that it understands where to get the connection string from.

2. Because I'm using Orleans there are way more environment variables that must be assigned instead of just the connection string in order for the Orleans app to even startup and recognize its providers properly. So, checking if the ExecutionContext is running vs publishing to override the connection string doesn't generate the details necessary for the Aspire Orleans package to pickup the configuration settings.

I would think this is a somewhat simple scenario for Aspire/Aspirate. Can we get some help or more documentation to support this?

Combinación de 2 formatos:

select CONVERT(VARCHAR, GETDATE(), 103) + ' ' + convert(VARCHAR, GETDATE(), 24)

E2E (End-to-End) testing validates entire user workflows, ensuring all parts of your application (frontend, backend, database) work together as expected. It is ideal and important for testing critical user journeys like login, checkout, or form submissions, especially when features span across multiple systems or parts of the application.

Unit tests, on the other hand, focus on individual functions or components in isolation and are faster and cheaper to run. They are sufficient for validating specific logic or component behavior without external dependencies.

E2E testing can be used to validate real-world scenarios and integration points, while unit tests should handle the majority of isolated functionality. A good test strategy balances both: unit tests for speed and coverage and E2E tests for user-focused validation.

Instead of using with syntax you can try manually using the context manager with __enter__() and __exit__(None, None, None)

It seems that Google OSS Licences Plugin v0.10.6 is incompatible with Gradle 8.8 and higher.
See: https://github.com/google/play-services-plugins/issues/299

Also check in wp-config.php if multisite if you are setting subdomain to true define('SUBDOMAIN_INSTALL', true);

I've got the same issue. Working from Arduino core with WiFiManager.h, can't handle to connect using ESP IDF and the protocol_examples_common.h

Have you ever solved this issue?

I have the same issue that VSCode cannot pick up the my .editorconfig config for my SQL scripts.

Turns out I missed the * character to wildcard all SQL files in my directory.

Here is an example of my .editorconfig file.

# EditorConfig is awesome: https://EditorConfig.org

# top-most EditorConfig file
root = true

[*]
end_of_line = lf
insert_final_newline = true

# Indentation override for all SQL files
# make sure you add the * to wildcard all your files.
[*.sql]
indent_style = space
indent_size = 2

Hope it helps.

Turns out that Starlette's url_for looks for the Route name, which is by default the name of the endpoint provided when making the Route object. In this case, it would be get_token, not token

Fortunately it was easier as expected. Originally, I created an empty ODS file with Microsoft Excel. This did not work with my approach. But when I create an empty ODS file with LibreOffice, it works perfectly.

In addition to @Reza's reply. In Compose, you can just pass ByteArray in model:

import kotlin.io.encoding.Base64
import kotlin.io.encoding.ExperimentalEncodingApi
/*private const val*/ BASE64_SUBSTRING = "base64,"


@OptIn(ExperimentalEncodingApi::class)
val base64ImageByteArray = Base64.decode(base64ImageString.substringAfter(BASE64_SUBSTRING))

AsyncImage(
    model = base64ImageByteArray,
    contentDescription = null,
    placeholder = ColorPainter(MaterialTheme.colorScheme.surfaceContainer),
    error = ColorPainter(MaterialTheme.colorScheme.surfaceDim),
    contentScale = ContentScale.Crop,
)

It looks like the issue was with the friend declaration in the Foo class. FRIEND_TEST(utFooFixture, FooStartsAndClosesProcess) expansion declares:

friend class utFooFixture_FooStartsAndClosesProcess_Test;

But utFooFixture is the class that needs to be declared as a friend.

What is the name of my dad dawood

1. Create SplashVC

Create a new Swift File: In your Xcode project, right-click on the project's folder in the Project Navigator and select "New File from Template" -> "Cocoa Touch Class". Name it "SplashVC.swift".

2. Update your AppDelegate.swift like

   @main class AppDelegate: UIResponder, UIApplicationDelegate {

    var window: UIWindow?
    private let navigationController = UINavigationController()
   
    func application(_ application: UIApplication, didFinishLaunchingWithOptions launchOptions: [UIApplication.LaunchOptionsKey: Any]?) -> Bool {
        window = UIWindow(frame: UIScreen.main.bounds)
        window?.rootViewController = navigationController
        window?.makeKeyAndVisible()
   
        goToSplashScreen()
        return true
    }
   
    private func goToSplashScreen() {
        let splashViewController = SplashVC(nibName: "SplashVC", bundle: nil)
        navigationController.setViewControllers([splashViewController], animated: false)
    }
   

   }

Based on a quick look at the source code, I think it's only histogram metrics that aren't allowed. Have you tried the other metric types?

In that vein, I played a little with the monthExt, QuarterExt, and modified as below. It appears to work.

{
  "name": "monthExt",
  "update": "[data('xExt')[0]['s']-oneDay ,data('xExt')[0]['s'] + ((ganttWidth-minDayBandwidth)/minDayBandwidth)*2*oneDay]"
},
{
  "name": "quarterExt",
  "update": "[data('xExt')[0]['s']-oneDay, data('xExt')[0]['s'] + ((ganttWidth-minMonthBandwidth)/minMonthBandwidth)*1.5*oneDay]"
},

I tried that and it did not work. What is the next step for a solution to the server connection?

In the settings module under Extension Configuration, femanager has the setting:

"Replace the input field for a fe_user's country with a select box."

Which is deseleced by default. Once this is checked and the cache cleared, everything works as expected.

Solved thanks perplexity.ai

Answer To forward a domain name in Wix to another domain in Wix, follow these steps: Go to the Domains section in your Wix account23. Click the Domain Actions icon next to the domain you want to forward2. Choose "Assign to a site" or "Assign to a different site" depending on whether the domain is currently connected to a site2. Select the site you want to forward to and click Next2. Choose "Redirect it to the primary domain" option2. Click Assign to complete the process2. "After completing these steps, allow up to 24 hours for the redirection to fully propagate3. During this time, your site may be accessible under both domain names. After 24 hours, when visitors enter the redirected domain's URL, the address bar in their browser will change to show the primary domain3."

I finaly manage to use tensorflow transformation to finish the job.

first turn it to numpy array:

feature = np.array(df.select("vector_features_scaled").rdd.map(lambda row: row[0].toArray()).collect())

and turn it to a tensor and voila!

feature = tf.convert_to_tensor(feature, dtype="float32")

I finnaly find the problem.

tensorflow dataset are a kind of data generator so we don't need to use a data generator to chunck dataset and pass it to tensorflow dataset.

Use .batch() to generated "chunck" of data to read by itteration.

Quick workaround: Delete this file, if you notice a file at this directory below:

android/app/src/main/kotlin/com/example/myapp/MainActivity.kt

I think you should be able to make your delete function internal. I don't see any visibility requirements in DAOs in the Room documentation. If you separate your DAOs into a separate module, visibility to your delete function will then be restricted to only within that module.

ok the solution was to remove the network from all containers and let the pod handle everything.

mediawiki.pod

[Pod]
PodName=Mediawiki
Network=mediawiki.network
PublishPort=8080:80
PublishPort=3306:3306

mediawiki-app.container

[Container]
Image=docker.io/mediawiki:1.42
ContainerName=mediawiki-app
Pod=mediawiki.pod

mediawiki-db.container

[Container]
Image=docker.io/mariadb:11.6
ContainerName=mediawiki-db
Pod=mediawiki.pod
EnvironmentFile=mediawiki-db.env

mediawiki.network

[Network]
Driver=bridge

I hit the same issue with oh-my-zsh custom plugins. I found the answer in oh-my-zsh's wiki.

In your .zshrc, you can specify the custom directory with an environment variable: ZSH_CUSTOM=$HOME/my_customizations

to day add

 titleAlignment: ListTileTitleAlignment.center,

See the options:

since Azure blob Allows unstructured data to be stored and accessed at a massive scale in block blobs. It supports streaming and random access scenarios. Also, if you want to be able to access application data from anywhere then you should choose Blob Storage. https://learn.microsoft.com/en-us/azure/storage/common/storage-introduction#blob-storage

Perhaps this video is useful https://www.youtube.com/watch?v=1YIOHhz5FgI

Install 'Linux Debugger' in VS 2022

why not just add the onclick attribute to the radio button?

<asp:RadioButton ID="CapitalImprovementsNO" runat="server" GroupName="CapitalImprovements" value="No" onclick="javascript:nocap();"/>

As far as I can tell the attribute isn't specifically an attribute of asp.net but it does end up an attribute of the generated HTML

I am doing similar of downloading from SFC and running in IIS. Getting the below exception which I think it isn't getting the import maps correctly. Thanks in advance

Uncaught TypeError: Failed to resolve module specifier "vue". Relative references must start with either "/", "./", or "../".

The solution to this problem is to use one topology for one topic.

The answer provided by Mayuhk works for the issue I laid out. But it slows down the function of the workbook to the point where it's basically unusable. I found that using the basic index-match-match functions with an indirect table array nested in each portion works much better.

INDEX(INDIRECT("'" & $B4 & "'!A11:Z41"),MATCH($C4, INDIRECT("'" & $B4 & "'!$A$11:$A$41"),0),MATCH(D$3, TEXT(INDIRECT("'" & $B4 & "'!$A$11:$Z$11"),"mmmm, yyy"),0))

My solution: I created a Flask server that acts as an interface between the Android Emulator and the Firebase Emulator.

Before (@BeforeClass) the tests I use OkHttp3 to send HTTP requests from the tests to the Flask server. These requests specify the data I want to load into Firebase. When the Flash server receives a request, it uses the Firebase Admin SDK to upload the data.

Try using SAFE.PARSE_DATE. It will attempt to parse each row following the format you indicate. It will return null if there’s an error. Here’s an example:

SELECT FORMAT_DATE('%Y-%m-%d', COALESCE( SAFE.PARSE_DATE('%d-%b-%y', column), SAFE.PARSE_DATE('%Y-%m-%d', column) ) ) AS formatted FROM table;

I'm not sure that Beautiful soup knows what you are saying. It's more like it uses some engine to parse and fix the HTML. It has this method soup.get_text() which returns all the text in HTML. Maybe you are looking for this. If not then it would help understand why you need such a function.

Thanks for all of them, Yes, The issue solved after removing the scope in >spring-boot-starter-tomcat in pom file or build and run config, need to select Add "dependencies scope with classpath"

Can you try to initialize your clients with localhost.localstack.cloud enpoint like suggesting in this answer?

I have gone through lots of discussion topics and read the below as well. I have tried a combination of solution posted by Ivan Shatsky and below. It is working. I have to monitor the performance for few days.

https://github.com/kbourdakos/facebook-UA-facebookexternalhit-1.1---RateLimit-Using-nginx/blob/main/configuration

I have created a working variant, but it works only once.

When I try to call it again, it doesn't work. Seems like something with ViewController lifecycle.

I will be grateful for your help. Maybe we can beat it together.

extension View {
func exportPDF<Content: View>(@ViewBuilder content: @escaping () -> Content, completion: @escaping (Bool, URL?) -> ()) {
    let documentDirectory = FileManager.default.urls(for: .cachesDirectory, in: .userDomainMask).first!
    let dateString = generateUniqueStringFromCurrentTime()
    let outputFileURL = documentDirectory.appendingPathComponent("MyFile-\(dateString).pdf")
    
    let rootVC = getRootController()
    
    let pdfView = convertToScrollView {
        content()
    }
    pdfView.tag = 123
    let size = pdfView.contentSize
    pdfView.frame = CGRect(x: 0, y: 0, width: size.width, height: size.height)
    
    // Insert the View to RootView to render PDF and remove from it afterwards.
    rootVC.view.insertSubview(pdfView, at: 0)
    let renderer = UIGraphicsPDFRenderer(bounds: CGRect(x: 0, y: 0, width: size.width, height: size.height))
    
    do {
        try renderer.writePDF(to: outputFileURL, withActions: { context in
            context.beginPage()
            pdfView.layer.render(in: context.cgContext)
        })
        completion(true, outputFileURL)
    } catch {
        completion(false, nil)
        print(error.localizedDescription)
    }
    
    rootVC.view.subviews.forEach { view in
        if view.tag == 123 {
            view.removeFromSuperview()
        }
    }
}

private func convertToScrollView<Content: View>(@ViewBuilder content: @escaping () -> Content) -> UIScrollView {
    let scrollView = UIScrollView()
    
    let hostController = UIHostingController(rootView: content()).view!
    hostController.translatesAutoresizingMaskIntoConstraints = false
    
    let constraints = [
        hostController.leadingAnchor.constraint(equalTo: scrollView.leadingAnchor),
        hostController.trailingAnchor.constraint(equalTo: scrollView.trailingAnchor),
        hostController.topAnchor.constraint(equalTo: scrollView.topAnchor),
        hostController.bottomAnchor.constraint(equalTo: scrollView.bottomAnchor),
        
        hostController.widthAnchor.constraint(equalToConstant: screenBounds().width)
    ]
    
    scrollView.addSubview(hostController)
    scrollView.addConstraints(constraints)
    scrollView.layoutIfNeeded()
    
    return scrollView
}

private func getRootController() -> UIViewController {
    guard let screen = UIApplication.shared.connectedScenes.first as? UIWindowScene else {
        return .init()
    }
    
    guard let root = screen.windows.first?.rootViewController else {
        return .init()
    }
    
    return root
}

private func screenBounds() -> CGRect {
    return UIScreen.main.bounds
}

private func generateUniqueStringFromCurrentTime() -> String {
    let dateFormatter = DateFormatter()
    dateFormatter.dateFormat = "yyyy-MM-dd-HH-mm-ss-SSS" // Format: Year-Month-Day-Hour-Minute-Second-Millisecond
    let dateString = dateFormatter.string(from: Date())
    return dateString
}

Which Magento version do you use here?

I've been having a lot of trouble with Digital Ocean building Python containers.

Basically you either have to reduce the memory needed which is hard/impossible or build it yourself and push as it explains here: https://docs.digitalocean.com/support/why-is-my-app-platform-build-or-deployment-failing-with-an-out-of-memory-error/.

There is no way to get historical data with the Telegram Bot API. But you can do this using a user account and the Telethon library. https://docs.telethon.dev/en/stable/ Quick start page here https://docs.telethon.dev/en/stable/basic/quick-start.html

However, this method will also allow you to receive only 100 messages at a time.

Kafka Streams left outer join on timeout

You use checkout.session.async_payment_succeeded (docs) to know when an async payment succeeds. Overall, you can't complete an expired Checkout Session, which is what triggers the async payment method to begin processing, so this shouldn't really be an issue.

Is there any way to get the result to show in a cell? What I would like is to count the number of worksheets (including hidden sheets) that are in a workbook up to and including a sheet named "SAMPLE", and then have this number displayed in cell BA on a sheet titled "ADMIN".

Something like this: txt_bene_birth_date > #01/01/ & DatePart("yyyy",Today())-2 & #

Kind of a follow-up to this question - but on the on-premises side. If the on-premises terminating endpoint changes (say a new firewall appliance where it terminates), is it simply a matter of changing the public IP on the local Gateway?

Any steps on the on-prem side? Thanks

Did you ever get this to work? I am trying the same thing.

Based on some answers provided by Databricks, the backfillInterval is used to check all files based on the interval you set. So it is supposed to check all files, just at the specified interval.

References: https://community.databricks.com/t5/data-engineering/what-does-autoloader-s-cloudfiles-backfillinterval-do/td-p/7709

https://community.databricks.com/t5/data-engineering/databricks-auto-loader-cloudfiles-backfillinterval/td-p/37915

[ERROR] Failed to execute goal org.springframework.boot:spring-boot-maven-plugin:3.2.5:repackage (repackage) on project SROIncidents: Execution repackage of goal org.springframework.boot:spring-boot-maven-plugin:3.2.5:repackage failed: Unable to find main class -> [Help 1]

above my error and all i did was

delete the files under src/main/webapp/WEB-INF/ which are "lib" folder and "classes" folder

then did a "MVN clean install" worked for my build.

There is update in React-Router-Dom in version 7 if you want to pass your test case use version 6 using *

npm i [email protected]

as of 2025 is still happening:

go mod tidy

solved the issue for me. Which is think it is better than deleting imports or deleting go.mod/go.sum.

Pay attention go mod tidy might take awhile and the first time you will run/build your main.go will also take some time.

• Click on the 🔗 button.

• The link will look like https://colab.research.google.com/drive/<xyz>#scrollTo=<abc>.

• Now while inserting link, use only the #scrollTo=<abc> part.

Video: https://imgur.com/a/10w3rzk

Can you please help? I want to exploit this vulnerability using the $.parseHTML function.

jQUery.1.12.4 Vulnerability

There was a membership agreement needs to be reviewed and agreed. Once I agreed and after 10 min

The best way to do this is likely blob storage connected to a VM, you can determine what type of storage you need for your requirements and use that. (This is dependent on the archive tier, for example the standard hot storage in a file share starts around 5 TB and can be extended from there.) In this case you may not need the VM and could just mount the drive to your machines.

According to https://github.com/OmixVisualization/qtjambi/tree/bfa9c310ccc56434727ac6ff3d30bac68a527b45, it is very much in active development.

According to the information provided on

FilamentPHP: Adding some style · Laravel Bytes

and the

Override account widget · filamentphp/filament · Discussion #8752

You can attempt customization by creating a resources/views/vendor/filament-panels/components/page/sub-navigation/sidebar.blade.php file.

hey am new to development especially in laravel , as mentioned in these website when using vendor publish wont there be issue if we dont lock the dependencies version, i could only think of using a seperate view independent of filament panel and adding the theme and styling from the vendor file (copying the code) and exclude the navigation and other panel elements ! will this work? is there any alternative to override panel layout without vendor publish ? i really need to exclude all panel layout element except for it theming and styling

I currently refactored a component with a very slow perfomance removing all methods from view, After refact the problem was solved and I thought the lag was due to methods in view but after a while I noticed the perfomance issue was due to console.log on those methods

go to the flutter dir and run :

git pull

(need good internet)

then : flutter --version

if this is not satisfactory then run : flutter upgrade --force

this is worked for me :)

You could try using @media print in your CSS to force the table borders and background colors to appear.

For example:

@media print {
  table {
    border-collapse: collapse; /* Ensures borders display properly */
  }
  table, th, td {
    border: 1px solid black; /* Forces visible borders */
  }
  th, td {
    background-color: #f0f0f0 !important; /* Forces background colors */
    color: black !important; /* Ensures text is visible */
  }
}

I’ve had a similar issue before where certain styles were being overridden or ignored during printing.

Please find official solution for this here https://datatables.net/examples/api/multi_filter.html . In the comments part of the documentation find the solution to modify it to bring it to head part.

1. Remove SceneDelegate.swift file
2. Remove SceneDelegate methods from AppDelegate.swift
3. Remove Application Scene Manifest from Info.plist file
4. Add var window: UIWindow? to AppDelegate.swift

Go to https://console.cloud.google.com/apis/ then, on the credentials section, select your project and update the Authorized Javascript Origins and Authorized redirect URIs with your homepage link.

Note: The localhost URI may change when rebuilding the app, so be sure to update the URIs in the Google Cloud API console.

I am experiencing the same issue recently. Did you manage to find a solution?

Can you add the full formula used? To check what is happening I need to check the full formula.

From what I see in the part of the formula shown, 'CASE WHEN {custcol_alloc_department.subsidiary} contains {item.linesubsidiary}' looks quite strange. They are using 'contains,' but 'contains' is a function that cannot be used on just any field as it requires a specific index.

Best ERPSof

Seems like there is definitely a security flaw that needs to be updated in your code or a timestamp issue in your database. However, I do think you should dive into the messages on your dashboard.

You've probably noticed that the pom does not exist at any of your specified URLs, which all return HTTP 404. Do you need to build PJSIP following the build instructions? The source code is on GitHub.

You can exclude it like this as well:

cargo test -- --skip "test_some_rare_test"

Could you share, years later :) what was the problem? I am facing the same issue. The Advice is not set or executed.

Sincerely,

I forgot to save the file lol!

As per the API documentation https://www.twilio.com/docs/sendgrid/for-developers/sending-email/segmentation-query-language#contains, CONTAINS function is mainly for querying on arrays(not a string function). One way to query for a subject line would be to use the LIKE operator(encoded).

Adding the node_modules folder to the .dockerignore file resolved the error for me

'sizeof' provides size information of types, not runtime array lengths when dealing with pointers. Always rely on a predefined constant or explicit size parameter for looping over arrays returned from functions.

If anyone in the future finds this: i gave up and downloaded everything from scratch in WSL2. works great.

yep, you were missing it, I have a quick question: My OKX wallet contains USDT, and I have the recovery phrase (channel cupboard south attend shrimp force spike toilet search position uncover question). How should I proceed to transfer them to Binance?