I am facing the same issue (see the logs here: Django app failing to get deployed on Azure web service). I have tried everything: adding the env variable: "SCM_DO_BUILD_DURING_DEPLOYMENT", pushed the code multiple times to retry, adding sys.path, updating startup command to read the wsgi and I also have requirements.txt at the correct location but I still get this issue.

Any other debug option?

This function. In good very codeigniter 4:

The two Render Trees are different.

Option1:

The Render Tree will be the same for both true and false values of isPlayerA

/*
  Root
    Counter
*/

Option2:

The Render Tree when isPlayerA is true

/*
  Root
    Counter
    false
*/

The Render Tree when isPlayerA is false

/*
  Root
    false
    Counter
*/

Now when it comes to state retention rule

Option 1 :

The state retention rule states that the state will retain when same component renders in the same position of the Render Tree.

In option 1, though the actual declaration rendered varies based on the variable isPlayerA, the same component Counter is rendered always in the same position of the Render Tree. When React compares the two Render Trees, the latest and the previous, it finds no difference and therefore the state in the previous render is retained for the latest render as well.

Option 2 :

Now let us inspect the first Render Tree. The Counter has rendered in the first place of the tree, and the second place in the tree is a hole since there is no component to render there.

/*
  Root
    Counter
    false
*/

In the second tree, Counter comes in the second position and the first position is a hole in the tree.

/*
  Root
    false
    Counter
*/

Now again the same state retention rules applies here: State does not retain between renders, since the component Counter changes its position on every render.

For a detailed post on the same can see over here:

How does React determine which state to apply when children are conditionally rendered?

The answer was a missing library. I had to find it online and download it. Selenium Type Library to be specific.

I am not sure what kind of environment you are workin on. If there is firewall enabled to access either jenkins or Git then need to work with the network team to enable the IP address to establish the connection otherwise it'll be difficult

A few suggestions untested here :

Application.Interactive = False 

Turn it back to TRUE when done.

ThisApplication.UserInterfaceManager.UserInteractionDisabled = True

Turn it back to TRUE when done.

You could just hide it from them:

Private Declare Function ShowCursor Lib "user32.dll" (ByVal bShow As Long) As Long

Private Sub Form_Load()

ShowCursor (0) ' Hide mouse cursor

ShowCursor (1) ' Show mouse cursor

End Sub

By Design, UPI intent would only function on the Mobile Devices due to multiple constraints. However, there are ways to make the experience better on Web i.e through QR codes which is displayed to the end customer who'll make the payment from their respective UPI Apps.

You have to run that code in order to have it activated. Run following code and then check again. print(random.randint(1,100))

VSCode does not give access to the built-in tokens.
Because the parser runs on the render thread and not the extension host thread.

You can instead use the same VSCode TextMate library to parse files and receive the tokens.

Otherwise you could use Web-Tree-Sitter.

As of December 2024, the old link to Christoph Gohlke's Unofficial Windows Binaries for Python Extension Packages is broken.

Christoph's project can now be found here, binary wheels specifically can be found here.

Following are the ways you can handle the problem statement:

• Ensure sessions are started correctly and session configurations are consistent.
• Store critical data (e.g., user ID) in a database or secure storage before initiating payment.
• Debug session data before and after the response to identify losses.
• Verify the gateway callback process and use unique transaction IDs to reconnect session data if needed.

I have posted an issue regarding this problem. They told me it is not possible to get row data while it is grouped

Write a program in C++to find a prime number within a range. The user must input the starting and end range for your program to display an accurate output.

Adding to the other answers, it got fixed for me without updating portal settings,

1. Deleted .vscode folder.
2. Closed and reopened VS code.
3. Clicked on "No" in the below popup which usually appears when I deploy from vscode(prviously clicked "Yes" and it resulted in an error posted here).

It appears that your problem is solved. Thats great to see!!

Alternatively, I'd like to introduce you to Treds, a high-performance prefix search server that excels in scenarios where lexicographical searching is a core requirement. Unlike Redis ZRANGEBYLEX, Treds ZRANGELEX always returns data irrespective of score, basically data across different scores are returned. It also returns score of elements. I have built Treds and it has Sorted Maps store instead of Sorted Set store.

If you're interested, feel free to explore Treds or ask any questions—I’d be happy to help!

https://github.com/absolutelightning/treds

Please check the readme for benchmarks.

If you use casbin in php, you can use the Yii-permission it provides, see here: https://github.com/php-casbin/yii-permission

When someone assigns you an issue on GitHub, it means:

Responsibility: You are responsible for addressing and resolving the issue. It is now your task to investigate, work on, and ideally, complete the solution.

Acknowledgement: The project maintainer or team trusts your skills and believes you can handle this task effectively.

Priority: The issue becomes part of your work queue. If the issue is part of a project or milestone, it may have deadlines or dependencies.

Collaboration: If others are involved, you might need to coordinate with them, share progress, or ask for clarifications.

Make sure to:

Understand the problem described in the issue. Communicate updates or ask questions in the issue thread. Submit your work as a pull request referencing the issue.

It looks like you’ve put a good amount of effort into your code, but troubleshooting Google Analytics Ecommerce tracking can sometimes be tricky. Let’s walk through a few common reasons it might not be working and how you can fix them:

1. Check if Ecommerce Tracking is Enabled Make sure you’ve enabled Ecommerce tracking in your Google Analytics property:

Go to Admin > View Settings > Ecommerce Settings in your Google Analytics account. Ensure both Ecommerce Settings and Enhanced Ecommerce Settings (if applicable) are turned on.

2. Verify the Transaction ID The id field in both ecommerce:addTransaction and ecommerce:addItem must match. You have it set as '22287' in both places, so that part looks good, but double-check the transaction ID is unique and consistent across all transactions.

3. Correct Syntax and Order of Calls The ga('ecommerce:send') call should come after all the addTransaction and addItem calls. Your code seems to follow this, so no issues here.

4. Revenue and Data Validation The revenue field in addTransaction is set to '0.00'. Google Analytics might not log a transaction with zero revenue, so try updating it to a realistic value, e.g., '10.00'. Similarly, ensure all other fields have appropriate values.

5. Debugging Tools Use the Google Tag Assistant Chrome extension or the GA Debugger:

Install the Google Tag Assistant or enable debugging by adding analytics_debug.js to your script. Check the console for any errors or issues.

6. Ensure Proper Loading of GA Script Confirm that the script for Google Analytics is loading correctly:

Open your website in a browser. Check the developer console for errors and verify if the script https://www.google-analytics.com/analytics.js is successfully loaded.

7. Network and Tag Validation Use the Network tab in your browser's developer tools:

Look for requests to www.google-analytics.com/collect. Verify if the Ecommerce data (e.g., transaction ID, revenue) is being sent.

8. Additional Tips Check if any ad blockers or browser extensions are interfering with tracking. Ensure there aren’t other conflicting scripts on the page.

If using a CMS (like WordPress), verify your theme or plugin isn’t overriding the tracking code.

Testing Your Fix

After making these changes, simulate a transaction and verify if the data appears in the Google Analytics Ecommerce Reports. Keep in mind that it might take 24-48 hours for data to populate in some cases.

Let me know if you need help with any specific step! 😊

In command prompt git -v or git --version

finally the problem was due to the “sameSite: ‘strict’”, the domain of my external login is not the same of my site, so the cookie was not accessible because the requests to my callback came from an external domain and the redirection was to an internal domain, so the cookie did not exist, this was fixed using the rule “sameSite: ‘lax’”

Facing the same issue did you resolve it ?

Check these 2 settings per doc as of version 2024-12

distributed.comm.timeouts.connect  30s
distributed.comm.timeouts.tcp  30s

Apple does not provide an official method to deep link directly to specific sections, such as the Weight data, within the Health app. The general URL scheme x-apple-health:// opens the Health app, but extending this to target specific data types or sections is not officially supported. This is what i know.

I'd like to introduce you to Treds, a high-performance prefix search server that excels in scenarios where lexicographical searching is a core requirement. Treds is optimized for prefix-based queries, and while it doesn't directly replicate all Redis functionalities, it offers a robust way to query and iterate over keys with common prefixes efficiently, with a focus on speed and flexibility.

If you're interested, feel free to explore Treds or ask any questions—I’d be happy to help!

https://github.com/absolutelightning/treds

To make Autopilot use modern activities by default in UiPath Studio (2025.0.157), here’s what you can do:

1. Check Your Project Settings: • Go to Project Settings → General Tab. • Ensure the Modern Design Experience is enabled. • In the newer versions, this option is usually enabled by default, and you might not see the toggle.

2. Update Your Activity Packages: Make sure you’re using the latest versions of: • UiPath.Excel.Activities • UiPath.System.Activities You can update them through Manage Packages → Official Feed.

3. Be Clear with Autopilot Prompts: Autopilot relies heavily on your instructions. Instead of typing: • “Read Range from an Excel file and write to a CSV file.” Try: • “Read Range from an Excel file using modern activities and write to a CSV file using modern activities.”

This small clarification helps Autopilot understand your preference.

4. Replace Classic Activities Manually (if needed): If Autopilot still generates classic activities: • Swap Read Range (classic) with Excel Read Range (modern). • Replace Write CSV (classic) with Write CSV (modern).

5. Restart Studio: Sometimes, restarting UiPath Studio can ensure all configurations and updates take effect properly.

Following these steps should guide Autopilot to use modern activities by default.

I found this Reddit post that’s helpful. The couple I’ve tried have worked on iOS 18.2 (22C152).

https://www.reddit.com/r/shortcuts/s/VtJZdzMAub

Use TEXTBEFORE() function.

=TEXTBEFORE(A1,".",-1)&".-"

Try to use implicit intent: https://developer.android.com/guide/components/intents-filters

define an intent action to your activity and then use it to open the activity in the bluetooth module.

<script>
  dataLayer.push({
    'event': 'purchase',
    'order_value': '<?php echo $totall; ?>',
    'order_id': '<?php echo $block->getOrderId(); ?>',
    'enhanced_conversion_data': {
      'email': '<?php echo $email; ?>',  
      'phone_number': '<?php echo $phone; ?>'
    }
  });
</script>

My best guess is that a quote is missing in the PHP echo statement of this code, potentially leading to an error when pushing. Could you please check and fix it?

just add the load function like this

const audio = document.createElement('audio')
audio.addEventListener('canplay',event=>{
console.log(`event:`,event)
})
audio.load()
document.body.appendChild(audio)

English is not my native language; please excuse typing errors.

The current problem has been solved.

The leak has been resolved with a profiler flame map.

The cause of the leak was a JSON utility class that kept loading the class safely when doing toString.

What's the main goal of your website? Is it for professional use, and what do you need it to do?

WordPress is a very powerful CMS that's been developed for over 20 years and works well out of the box. But, as you said, it requires updates and maintenance, which can be frustrating. Finding something similar but simpler is tricky. I'd recommend looking into Ghost or Hugo - both are lightweight alternatives. Maybe Jekyll. Still, you'll need to spend some time learning how they work and do programming.

I had a similar experience when I tried using Vue.js and Nuxt. I'm not a frontend developer ether, and I just wanted to build a pet project, but it turned into endless debugging, so I gave up. Later, I tried Next.js, and it felt much easier to work with. Now I actually enjoy learning and exploring the framework, and since it's closely related to React, I realized the skills I was gaining could be valuable for future projects or even for collaborating with other developers. Anyway, it's still a lot of work.

This is simple one solved at my end. when we run docker we need to always stop iis through command line just stop IIS its working for me

1. open command in administrative mood
2. write command iisreset/stop enter image description here

run docker compose up command it will work

I test your code. The reason of slow is there are some invalid URLs in the playlist, which causes yt_dlp have to retry. You can control the retry times by parameter skip_playlist_after_errors.

Please refer code below:

import yt_dlp
url = 'https://www.youtube.com/playlist?list=PLyiJZcChPSpxLQHGf6K5CwGv7QIR55ea6'

def get_video_info(url):
    # Use dump_single_json to output JSON
    # Assign -1 to skip_playlist_after_errors to do not retry 
    ydl_opts = {"ignoreerrors": True, "dump_single_json": True, "skip_playlist_after_errors":-1}
    with yt_dlp.YoutubeDL(ydl_opts) as ydl:
        info = ydl.extract_info(url, download=False)
    return info
info = get_video_info(url)
print()
print(info.get('entries'))

This worked for us.

First, we need to get id_token from Keycloak along with access_tokenwhen getting token from keylcoak.

To get id_token from keycloak we need to set scope=openid for the keycloak token REST API.

Once we have the id_token during logout we called the Keycloak logout directly from browser as GET request in below format (not from backend application).

https://keycloaktest:8443/auth/realms/<realmName>/protocol/openid-connect/logout?id_token_hint=<idTokenValue>&post_logout_redirect_uri=<postRedeirectURL>

Reason was that i installed Python at path with cirilic symbols, when i installed it at other path, everything started work fine

In almost 2025, I'm with the exact same issue. Have you solved this?

Use this tool. It also provides uncertainty analysis.

https://cdrh-rst.fda.gov/validpath-whole-slide-image-processing-and-machine-learning-performance-assessment-tool

This tool helps. It also provides uncertainty analysis as well.

https://cdrh-rst.fda.gov/validpath-whole-slide-image-processing-and-machine-learning-performance-assessment-tool

this worked moving from Vite to Next.js, thanks for the help

Adding following in test setup file will resolved issue for me

import ResizeObserver from "resize-observer-polyfill";

....

global.ResizeObserver = ResizeObserver;

With nginx, I had to add the "fastcgi_buffering off" directive.

Adding to @ZAR's answer, as of December 2024, the following works (notice examples):

Field(schema_extra={'examples': "A very nice Item"})

From the FastAPI documentation:

OpenAPI 3.1.0 (used since FastAPI 0.99.0) added support for "examples", which is part of the JSON Schema standard. Before that, it only supported the keyword "example" with a single example. That is still supported by OpenAPI 3.1.0, but is deprecated and is not part of the JSON Schema standard. So you are encouraged to migrate example to "examples". 🤓

You can use sign-in-template(above api level 2) provide by google

https://developers.google.com/cars/design/create-apps/apps-for-drivers/templates/sign-in-template

This question was already answered by Allround Automations:

It is unsupported, but if you have an ODBC datasource for your database, and install the Oracle Open Client Adapter (OCA) for ODBC, you can connect to any database

And it still doesn't make much sense.
PostgreSQL's language is PL/pgSQL, not PL/SQL. So, most or all programming code wouldn't run, requiring at least slight changes. You'd be able to run simple DML queries, but that's not the reason to use PL/SQL Developer in the first place.

curl -X PUT http://192.168.0.10:91/LAPI/V1.0/Channels/0/PTZ/Presets/2/goto { "Response": { "ResponseURL": "/LAPI/V1.0/Channels/0/PTZ/Presets/2/goto", "CreatedID": -1, "ResponseCode": 0, "SubResponseCode": 0, "ResponseString": "Succeed", "StatusCode": 0, "StatusString": "Succeed", "Data": "null" } }

But still i don't know how to use syntax for run it from http...anu suggestions ?

Wordpress has 2FA, and so do several web hosting services. I'd recommend activating 2FA where you have it. Also, make sure the machine you're working on has virus protection - at least Windows defender if using PC.

gracias estaba buscando este me dio la ia pero no corria plot_shape(series = buy_signal, plot_shape_style = shape_style.triangle_up, shape_color = rgba(0, 255, 0, 0.5), plot_shape_location = shape_location.belowbar) plot_shape(series = sell_signal, plot_shape_style = shape_style.triangle_down, shape_color = rgba(255, 0, 0, 0.5), plot_shape_location = shape_location.abovebar) esta es la correcta plot_shape( (buyCondition), "", shape_style.triangleup, shape_size.huge,
colorBuy,
shape_location.belowbar, 0, "RX-Buy", "pink"

Make sure that the objMember object is not detached. If the object is not detached first find the object in the database and then try the delete operation again

Faced similar issue and fixed as below:

someDatagrid.ItemsSource = null; someDatagrid.ItemsSource = someDataSource;

I was in the same boat you were about 4 days ago. I found that using picamera 2 was the only way I could get it to work.

from picamera2 import Picamera2
from ultralytics import YOLO
import cv2
import numpy as np

# Load the YOLO model


# Initialize the Raspberry Pi camera
picam2 = Picamera2()
config = picam2.create_preview_configuration(main={"size": (640, 480)})
picam2.configure(config)
picam2.start()

# Function to process frames with YOLO
def process_frame(frame):

# Display video feed
try:
    print("Press 'q' to quit.")
    while True:
        # Capture frame from the Raspberry Pi camera
        frame = picam2.capture_array()
        frame = cv2.cvtColor(frame, cv2.COLOR_RGB2BGR)  # Convert to OpenCV's BGR format

        # Process frame with YOLO
        processed_frame = process_frame(frame)

        # Show the video feed
        cv2.imshow("Video Feed", processed_frame)

        # Exit if 'q' is pressed
        if cv2.waitKey(1) & 0xFF == ord('q'):
            break
finally:
    picam2.stop()
    cv2.destroyAllWindows()

The problem I am trying to fix is to display the video feed on the display so that I can see the bounding boxes on the objects YOLO detected. But cv2.imshow does not seem to work for some reason. The other parts of the code work tho.

I think that this also works and can be a bit simpler.

df1 = pd.DataFrame({'A':[1, 3], 'B':[2, 4]})
df2 = pd.DataFrame({'C':[5, 7, 9], 'D':[6, 8, 10]})

pd.merge(df1, df2, left_index=True, right_index=True, how='outer')

I think you need to tell the server to load the module, probably a conflict between the conf file the server create and load from.
Try to create a redis.conf with loadmodule /usr/lib/redis/modules/rejson.so or symply pass --loadmodule /usr/lib/redis/modules/rejson.so when you launch.

.ant-picker-cell {

text-align: center !important; }

as per implementation, lazy defined relation are loaded automatically when the program code makes use of them. In the meanwhile they are proxied. See this description: https://backendhance.com/en/blog/2023/jpa-fetching-strategies/#lazy-loading

To make use of pagination you should maybe read into https://thorben-janssen.com/pagination-jpa-hibernate/

Pagination is customizable to a certain extend.

When a method is deprecated, VS Code, helpfully puts the strikethrough on the method. It helps in the event that you're refactoring or fixing bugs/issues. But it can be an eyesore. Simply toggling the option from true or false in your settings.json folder, will get rid of this.

{
  "editor.showDeprecated": false, 
}

If you are using a Jupyter Notebook enviroment, use !pip instead pip as you want to execute pip as a shell command and install s3fs directly into the kernel.

!pip install s3fs

Be sure to restart the kernel after installation.

If someone still facing the same issue, you have two options:

First Option:

• Write exit command before closing VSCode window.

Second option:

1. Go to File -> Preferences -> Settings
2. On "Search settings" bar write "Persistent Session Revive Process"
3. Update it from OnExit to OnExitAndWindowClose

The basic problem I see is, that you use CommonContextHolder and CommonContext in a static context and Spring is not designed to "deal" with static contexts... simply said.

You were writing about a Spring context which also does not exist in a unit test (here junit5).

If you want to take advantage of the Spring context in a test case you should invoke the test with @SpringBootTest. This will also load all your Spring annotated Beans into the test context. Only then you are able to access these classes in your test setup methods after injection with @Autowired. But they can't be static. Please avoid static classes in a Spring Boot application... for simplicity.

If you want to have the tenant flag editable during runtime, test or production, you need to create an instance of that class. Spring Boot will do this for you. Simply add @Component annotation on class level. Add @SpringbootTest annotation to your test, remove other annotations.

You can get and set tenant context in setup methods and runtime. Provide Getters and Setters of course.

Another way of having the context available and usable in a unit test environment is to mock it, for example with Mockito.

You have to know that unit test are made for testing only simple, small and dedicated parts of code. Spring context usually does not belong to a unit test context. So you have to mock it for that.

Has this changed? Because for me it doesn't even convert the HEIC to jpeg.

It looks like you have to use window.obj() instead of window because window is the private struct and not the GObject.

I had the same problem but in Fedora. The

sudo dnf install clang-tools-extra

command fixed this.

Use FILTER with BYROW and MATCH:

=FILTER(A2:A199,BYROW(C2:Y199,LAMBDA(row,MATCH("serial# 0001-0010",row,0))))

BYROW

awk \
'BEGIN {
    # afre = All Fields RegExp
    "tr \\\\012 \\| < field-names.txt" | getline afre;
    sub(/\|$/, "", afre);
    afre = "(^| )("afre")( |$)";
}
$0 ~ afre { print FILENAME; }
{ nextfile; }' **/*.TXT

We take the time once at the start to compute the regex for any one of all the fields looked after,
so that the main "loop" can then run at max throttle.

And as we look only in the first line, after having looked up we use a nextfile unconditionally to switch to the next input file, wether we had a match or not.

Which solution to choose?

So the difference with @anubhava 's solution (that I liked too, and voted up: for my first three bullets, which solution you choose is a matter of taste) are:

• dedicate the script to the lookup (do not mix the lookup with the regex building)
• build the regex with an external search and replace instead of a loop
• use the ^ and $ to match as the first or last field
  but I often use the additional spaces trick too
• do nextfile wether we match or not (no point in continuing reading all lines of a file whose line 1 did not match)

Further optimization

Note that depending on the implementation of awk, the $0 ~ afre may recompile the regexp at each line (because it is a variable, it can… vary, thus awk has to check it has not changed if it wants to cache the compiled version of the regex).

As you run it by shell, you can force it to a fixed regex (more easily optimizable) with an (admitedly less readable):

awk \
'/(^| )('"`tr \\\\012 \| < field-names.txt | sed -e 's/|$//'`"')( |$)/ { print FILENAME; }
{ nextfile; }' \
**/*.TXT

The guides provided in Microsoft Learn were largely correct, aside from 2 minor but important things that took a while to find.

1. For iOS, it required that a new version number be applied in the csproj file in order for it to detect that universal linking was enabled. I've no idea why. Found the answer deep in the comments here: iOS Universal Links are not opening in-app

2. For Android, the problem was in domain verification. Firstly, the assetlinks.json file needs to be UTF8 encoded. Secondly, the SHA256 you use in the assetlinks.json file needs to come from the adb command adb shell pm get-app-links com.package.name, whereas the guidance on the Microsoft articles were to get it from the keystore. Answer was found here: How to resolve Android get-app-links Returns State 1024?

if you're facing the same issue, here is a workout that works for me:

image: z
    .union([
      z
        .instanceof(File, { message: "Image is required" })
        .refine(
          (file) => !file || file.size !== 0 || file.size <= 5000000,
          `Max image size is ${5000000}MB`
        )
        .refine(
          (file) =>
            !file ||
            file.type === "" ||
            ["image/jpeg", "image/png", "image/jpg"].includes(file.type),
          "Only .jpg, .jpeg, and .png formats are supported"
        ),
      z.string().optional(), // Allow the existing image URL for editing mode
    ])
    .refine((value) => value instanceof File || typeof value === "string", {
      message: "Image is required",
    }),

• Dec 2024: For me, just paste by right-click. The content (multi-lines) is pasted to the Powershell prompt and waiting for edit (without executing right away).

You should follow these steps in the Newer version of Android Studio starting from October 2024.

• install FlutterX from the plugins section of Android Studio.
• Open a terminal in the project directory
• flutter clean to clean your flutter project.
• flutter create . to recreate the missing iml files.
• flutter pub get to get packages.

With this done, look at your status bar; you should see the Flutter logo in this image. Click on it and select Open Android Project.

How will this same function be implemented for Linux/MacOS?

Try deleting the intent and recreate . I did same and it worked for me .

So the main problem seemed to be that rsp would go out of alignment every time I pushed to it, the solution was simple enough, add rsp, 8 fixed the code. fixed assembly:

default rel
extern ExitProcess

section .text
global _start
_start:
    and rsp, 0xFFFFFFFFFFFFFFF0

    mov rax, 32
    push rax
    push QWORD [rsp+0]
    add rsp, 8

    pop rcx
    mov ecx, ecx
    call ExitProcess

Basically I had to align the stack pointer after every push

you just need to prefix .env variables with EXPO_PUBLIC_

Your approach is fine.

Instead of three seperate cases you could also use this, which is not better but just another way of doing it:

EMAT = (L1 hit rate × L1 time) + 
   (L1 miss rate × L2 hit rate × L2 time) + 
   (L1 miss rate × L2 miss rate × full miss penalty)

You can create a custom implementation of a CahcedPool that mimics the behaviour of LDAPConnectionPool. To do this, you can override the keepAlive() method behaviour of the CahcedPool, which, like I said earlier, can be achieved by creating a custom class extending LDAPConnectionPool(i.e make a special CachedPool that mimics the behaviour of your specific pool, LDAPConnectionPool).

Hi I want to make my own website hidden java games that it should not show on phoneky and any website if you know this website is a link to download ported java games app runner and unlimited rooms to download if you don't mind please release and build java runner and any app ok

What works for me was not making a 2-dimensional array, but directly put in each component "imports" the dependencies as array: @Component({ ...... imports:[TableComponent,TableHeaderComponent,TableBodyRowDirective,...etc]

At the end it wasn't really CORS related , because if it was a CORS issue you would at least get a response . The problem was that my frontend was working over https and my backend was working over http , thus the browser was blocking the request due to a mixed content policy . The error was quite misleading especially in mozilla , (i guess chrome is a good browser to work on after all). So simply i altered the requests to be made to an endpoint on my domain and told nginx to forward them to my backend , this way the browser would have no reason to block the request from being sent.

1. create a new mount point using sudo mkdir /mnt/ccache

2. then bind ccache directory to that mount point using

   sudo mount --bind /home/<your_account_username>/.cache/ccache /mnt/ccache

replace <your_account_username> with the appropriate value. After this, add the following

3. nano ~/.bashrc file and adds:

   export USE_CCACHE=1 export CCACHE_EXEC=/usr/bin/ccache export CCACHE_DIR=/mnt/ccache

save and exit

4. Terminal: ccache -M 50G

5. add auto mount: sudo nano /etc/fstab /home/<your_account_username>/.cache/ccache /mnt/ccache none defaults,bind,users,noauto 0 0 save and exit

nano ~/.profile mount /mnt/ccache save and exit

You should not see these errors ever again.

The counter example is

==== ==== ==== ====
   ---  xxx  ---
   ---       ---
   ---       ---

We want the (====) bars, but the (xxx) breaks sorting by fewest conflicts, as when it's picked, it stops the middle two (====) from ever being selected.

please check closed issue in lib's repository: https://github.com/lukaszkurantdev/react-native-fast-opencv/issues/13

There is some explanation how to use getPerspectiveTransform opencv function. I hope it will be helpful for you.

I like the use of && logical operator to check if the value is in and out of range instead of using the || logical operator. It just makes more since

You can also put the grid row number into one of your grid controls .CommandArgument properties when loading the grid, then retrieve the value on gridview.RowCommand when selected:

1. grdview yourcontrol.CommandArgument = intRowNo (gridview.rowdatabound event)
2. Dim intRowNo As Integer = e.CommandArgument - 1 (gridview.rowcommand event)

procedure TfrmOrcamento.btnSalvarClick(Sender: TObject);
var
    i : integer; 
    vValor : Double;
begin    
    for i := 0 to Pred(listaOrcamento.Count) do
        begin
              vValor:=vValor+
              TfrmTipoOrc(listaOrcamento.ListItems[i].Components[0]).edValor.Value;
        end;
end;

I use this two condition on the date I'm testing against.

=EOMONTH(TODAY(); -1)+1
and
=EOMONTH(TODAY();0)

The other method to test for the date is not taking into account the year and would get you the data from the past years.

You would need to do the following, which is longer.

=AND(YEAR('Date')=YEAR(TODAY());MONTH('Date')=MONTH(TODAY()))

No, this is not a bug. In toHaveBeenCalledWith, the arguments are checked positionally, as explained in the first comment.

If you run into this problem and would like to avoid it for console.log specifically, a relatively simple fix is to use template strings in Javascript instead of passing arguments that console.log concatenates with a space. A template string uses backticks (`) to delineate the string, and will execute code which is placed between ${ and } inside the string. The result is a single string, parts of which are the result of executing the code in the ${} parts, and so console.log will get called with a single argument. Thus, your call to any of the various Jest matchers will see the whole string as the first argument.

I've ran into the same issue. For some reason, adding +1 to itemIndex works. Without the +1, it also doesn't seem to scroll to the right amount ever. Maybe it's for some reason 1-indexed?

/Volumes vs /volumes are different. For example I was setting GITLAB_HOME=/volumes/ext_ssd1/gitlab and it kept on erroring out.

/Volumes was already part of Docker but still it kept saying mount denied.

Changing from /volumes to /Volumes helped.

Answering my own question to help others who might face the same issue in the future. While I still don't understand why in some cases the script_score gets called more than once, I was able to fix the scoring.

To prevent the scoring from being summed or multiplied I added boost_mode: replace parameter like below:

{
  "query": {
    "function_score": {
      "query": { ... },
      "boost_mode": "replace", // Adding this fixed the issue for me
    }
}

I found this solution by looking at OpenSearch docs https://opensearch.org/docs/latest/query-dsl/compound/function-score

You can specify how the score computed using all functions[1] is combined with the query score in the boost_mode parameter, which takes one of the following values:

• multiply: (Default) Multiply the query score by the function score.
• replace: Ignore the query score and use the function score.
• sum: Add the query score and the function score.
• avg: Average the query score and the function score.
• max: Take the greater of the query score and the function score.
• min: Take the lesser of the query score and the function score.

[1] Note that the boost_mode works in both scenarios: whether you have a single function (as in my case) or multiple functions (also in case of multiple functions you might want to look at score_mode parameter too from the same docs page that I provided its link above)

you can use quiktime to record the sound then add it to the video.

Is there any reason that irq_callback_table needs to be an std::array<>? If it were an old fashioned C style array, there would be no bounds checking whatsoever so no possibility of an exception.

Hey maybe the following question can help you out: When to use ModelAndView vs Model in Spring?

It is similar to leaflet demo page example. I would suggest to add the markers themselves instead of several layers

  sedi.forEach((sede) => {
      const marker = L.marker([sede.lat, sede.lng]).addTo(map).bindPopup(`<b>${sede.name}</b>`)
      markers.addLayer(marker) 
    })

This is heavily dependent on "what" and "which" and other questions. I believe I have read somewhere that reference is in general the fastest method of passing larger pieces of data around in Rust. You will get different results based on the size, the access, possible the type and to mix it all up, even your environment and other running processes can affect the results. The same benchmark test could differ in end results depending on your system.

I made some very un-scientific tests, and on my system, the fewer iterations i made the relatively slower the reference method became, while it would catch up as i increased the # of iterations.

In the lower end of iterations the reference was taking twice the time as the no_reference, and as i increased the time difference would decrease. By the 10_000_000 mark the difference was less than 1%.

Currently it is iterating through 1_000_000_000_000_000, and by the time of writing this, it wasn't finished. yeah.. didn't really think that one through when I clicked run!

I was able to resolve this by switching for dayGridYear to just dayGrid.

For my case, the build from Qt worked but exe did not. I had to copy the "sqldrivers" folder and all its DLLs from Qt folder to deployment folder next to exe file. Remember to dump the folder and its content there not just the contents, it's looking for the path in that folder.

Are you successful in the end? I'm trying to integrate mega.io into my flutter project too and I can't do it

Hi instgram my instgram account is Huck my account name @get_fit_withkulsum My account is Huck no access gmail account and phone number changed and please recover my Instagram account very important my account please reset link send is email [email protected] My account is Huck no access email account phone number reset password please help me instgram

screeninfo is a dependency of ursina, it looks as if you need to install it manually:

pip install ursina

have you figured it out, how to do silent sign in with the new Credential Manager?

I had the same error but nothing worked for me. So, I replaced ntlk.download('punkt') with ntlk.download('punkt_tab') and it worked. Actually "punkt_tab" is a newer, more accurate version of the same tokenizer.