Sync files with gradle doesnt appear even as an option under the file menu. I am using ladybug, with flutter and the latest gradle. The is no way to sync files with gradle. And because you cannot do this, it causes alot of of issues when you are trying to build the apk.

Now if you go to settings, tools, build tools deployment. You can no longer choose a jdk for the gradle either!.

If you go to settings, appearance, toolbar and menus. You can finally see a button option for Sync files with gradle. You can choose where the buttion should appear. Apply changes. And guess what... THE BUTTON DOES NOT APPEAR.

Replace your mm with minimum_should_match then recheck it if it works.

I hope it helps!

pkg=your.android.pkg' perm='WRITE_SECURE_SETTINGS' abd shell dumpsys package "$pkg"

The solution seems quite simple: subdomain_matching has to be enabled.

app = Flask(__name__, subdomain_matching=True)

The problem IMO is that in this moment Flask documentation is not so clear about this.

In particular the documentation quotes:

SERVER_NAME "Must be set if subdomain_matching is enabled, to be able to extract the subdomain from the request."

but I couldn't find where it explicitly says that since 3.1.0 setting SERVER_NAME alone doesn't activate sudomain_matching anymore.

I think you code is correct but its needs to get some optimized. Try it

I understand the importance of finding a reliable solution tailored to your needs. With my expertise and dedication, I am confident in providing you with the best possible answer. Just share your email address with me, and I will promptly send you a detailed and professional response in PDF format. Rest assured, I value your time and trust, and I am committed to delivering quality work that meets your expectations.

Query using DbContextOne var apps = contextOne.App.ToList(); // Load all apps

or Query using DbContextTwo or Merge Results in Memory

This error will also occur if you forget your main function

Asleep

#include "xml.h"

XML::Document doc;

doc.load("images/punisher-2.svg");

Awake

#include "xml.h"

XML::Document doc;

int main()
{
    doc.load("images/punisher-2.svg");
}

To compare clusters from different years using K-Modes, you can:

1. Compare Centroids: Calculate the similarity (e.g., Jaccard or Hamming distance) between the cluster centroids from each year.
2. Track Cluster Changes: Compare cluster sizes and feature distributions over time to identify trends.
3. Use Visualization: Apply dimensionality reduction (e.g., PCA) to visualize how clusters overlap across years.
4. Cluster Consistency: Use metrics like Adjusted Rand Index (ARI) to measure stability between clusters across years.
5. Cluster Overlap: Create a heatmap to visualize overlap between clusters across years.

I am working on simillar project with you and having exactly the same problem. I found a recently updated notification on spotify. https://developer.spotify.com/blog/2024-11-27-changes-to-the-web-api

sqlalchemy.dialects.sqlite.insert

Construct a sqlite-specific variant Insert construct. The sqlalchemy.dialects.sqlite.insert() function creates a sqlalchemy.dialects.sqlite.Insert. The Insert construct includes additional methods Insert.on_conflict_do_update(), Insert.on_conflict_do_nothing().

from sqlalchemy.dialects.sqlite import insert

session.execute(insert(Date).values(
    [{"date": date_} for date_ in new_dates]).on_conflict_do_nothing())

Try adding a / before the path to the image. So, /img/giyim/soft-set2.webp in the db.json file.

Also, it will be easier & as a general project structure rule, you should store all your assets like fonts and images in 1 folder named assets.

Snapshots and time travel are not ideal for CCPA/GDPR use cases. copy-on-write would be ideal if it were performant. I am embarking on a similar iceberg journey with CCPA/GDPR and trying to get ahead of the curve on potential bottlenecks. My next step is to evaluate insert overwrite (partition) for my use cases. It will also help me in the long run from an optimization perspective.

I'm a bit late with my reply, but with react-big-calendar v1.15.0 I could get it to work by adding

import 'react-big-calendar/lib/addons/dragAndDrop/styles.css';

See https://github.com/jquense/react-big-calendar/issues/1999

To extract tables (including their structure) from PDF documents effectively, especially when dealing with non-English fonts, I recommend using VeryPDF Online Table Extractor. This tool is designed specifically for table extraction from PDFs and offers several advantages:

1. Accurate Table Recognition: It extracts tables directly while maintaining their structure, regardless of the font or language used in the PDF.
2. No OCR Required: Since the document is not a scan, VeryPDF Online Table Extractor works perfectly without relying on OCR.
3. User-Friendly Interface: You can visually select the table area within the document and customize the extraction as needed.
4. Versatile Output Options: Export the extracted table to Excel, CSV, or other formats.

You can try it with your PDF to achieve precise results without relying on coordinate-based extraction or complex transformations. This solution will also work reliably for future PDFs with varying layouts.

@tyg : Thank you for your answer. Below code worked for me.

@Database(
entities = [UserEntity::class, ShopDetailsEntity::class],
version = AppConstants.DB_VERSION,
exportSchema = false

)

Was able to solve the issue. Actually was just an indentation issue on my application.yml.

The starttls should be inside the smpt like this:

mail:
 smtp:
   trust: "*"
   auth: true
   starttls:
     enabled: true
     required: true
 connectiontimeout: 5000
 timeout: 3000
 writetimeout: 5000

from itertools import chain

regular_list = ["foo", ["banana", "apple"], "banana", ["peaches", "grapes"]]

flat_list = list(chain.from_iterable((item if isinstance(item, list) else [item]) for item in regular_list))

print(flat_list)

Just an update here, I found the issue in my node_modules. I had to remove my modules and run npm install, which solved it.

Debug -> Layout Settings -> check variable and console see image below: enter image description here

tensorrt-llm has an unconditional requirement on pywin32 - see https://inspector.pypi.io/project/tensorrt-llm/0.14.0/packages/1f/93/384befbf1b7a1d7e09eef4829e0dfb2dcf07a1b7f21cdfa368dc01605be0/tensorrt_llm-0.14.0.tar.gz/PKG-INFO#line.28

you should report a bug to that project

i get the same errors using solana-program 2.1.0 to .4 and stable solana version fetches v1.42 platform-tools wich doesn't exist ihe download is 404... have to change version so they all fit 2.1.2 is ok fetches v1.43 but gives a build error for

        warning: [email protected]: include/ring-core/target.h:64:2: error: "Unknown target CPU"
warning: [email protected]:    64 | #error "Unknown target CPU"
warning: [email protected]:       |  ^
warning: [email protected]: In file included from crypto/mem.c:58:
warning: [email protected]: In file included from crypto/internal.h:115:
warning: [email protected]: include/ring-core/check.h:27:11: and build fails
mine asks for solana-pubkey feature that is a dependency therfore cannot be used as a feature!!!

    myenvjustinlanouette@iMac-de-Justin sns-integration % cargo update
    Updating crates.io index
error: failed to select a version for `solana-pubkey`.
    ... required by package `solana-program v2.1.4`
    ... which satisfies dependency `solana-program = "^2.1.4"` of package `sns-integration v0.1.0 (/Users/justinlanouette/Metaverse-Developement/anarcrypt.sol/programs/sns-integration)`
versions that meet the requirements `=2.1.4` are: 2.1.4

the package `solana-program` depends on `solana-pubkey`, with features: `solana-sha256-hasher` but `solana-pubkey` does not have these features.
 It has an optional dependency with that name, but that dependency uses the "dep:" syntax in the features table, so it does not have an implicit feature with that name.

failed to select a version for solana-pubkey which could resolve this conflict myenvj

I found the following piece of code to produce the same array as r in your example.

np.take(entry,indices,axis=0) 

It seems that stacking is not necessary with the take function.

Might not even need this information but just wanted to say you're an excellent person for coming back and posting your solution!

The most viable alternative is using the Data Contract. It is also easy to use, a totally transparent and type-agnostic technology with good performance (due to assemblies generated on the fly using System.Reflection.Emit under the hood. Everything is explained in the documentation.

There's apparently yet another option in Text Editor/General: "Automatically surround selections when typing quotes or brackets." It works for the C# editor, tested in Visual Studio 2022 17.13 Preview 1.

Can't you just put the headers in a different frame, above the canvas that scrolls? That should keep the table headers in place while you scroll through the contents of the table.

I found the solution. Go to Project > Properties > General then change target platform to Latest.

This should be a quick fix npm install --save-dev @babel/plugin-proposal-private-property-in-object

I have been searching for an answer for a long time. And now, after posting the question I found it.

When returning the error messages as I am doing:

return new ValidationResult(errorMessage);

The error message isn't bound to the field. To bind the error messages to the field the return should instead be:

return new ValidationResult(errorMessage, [validationContext.DisplayName]);

Sequoia 15.1.1, Xcode 16.1. I had Apple Intelligence toggled off in System Settings. After turning it on the Predictive Code Completion Model installed without this error.

Replacing imeOptions setting EditorInfo.IME_ACTION_DONE with EditorInfo.IME_ACTION_NONE fixes the issue.

tu solución me ayudo mucho, dejo el código equivalente en java:

import java.util.ArrayList;
import java.util.List;

public class BoatMovements {
    /**
     * @return boolean The destination is reachable or not
     */
    public static boolean canTravelTo(boolean[][] gameMatrix, int fromRow, int fromColumn, 
                                    int toRow, int toColumn) {
        // Out of bounds
        if (toRow > gameMatrix.length - 1
            || fromRow > gameMatrix.length - 1
            || toColumn > gameMatrix[0].length - 1
            || fromColumn > gameMatrix[0].length - 1) {
            return false;
        }

        // Moving illegally
        if (
            // ... within the same column, up or down
            (fromRow != toRow && Math.abs(toRow - fromRow) > 1)
              // ... within the same row, left or once/twice (at most) right
              || (fromColumn != toColumn && ((fromColumn - toColumn) > 1 || (toColumn - fromColumn) > 2
            ))
        ) {
            return false;
        }
        
        if (fromRow == toRow) { // Moving horizontally
            List<Integer> toCheck = range(fromColumn, toColumn);
            for (int col : toCheck) {
                if (!gameMatrix[fromRow][col])
                    return false; // Path is blocked
            }
            return true;
        } else if (fromColumn == toColumn) { // Moving vertically
            List<Integer> toCheck = range(fromRow, toRow);
            for (int row : toCheck) {
                if (!gameMatrix[row][fromColumn])
                    return false; // Path is blocked
            }
            return true;
        } else {
            // Moving diagonally is not allowed
            return false;
        }
    }

    // Implementación de la función range de PHP
    private static List<Integer> range(int start, int end) {
        List<Integer> result = new ArrayList<>();
        if (start <= end) {
            for (int i = start; i <= end; i++) {
                result.add(i);
            }
        } else {
            for (int i = start; i >= end; i--) {
                result.add(i);
            }
        }
        return result;
    }

    public static void main(String[] args) {
        boolean[][] gameMatrix = {
            {false, true,  true,  false, false, false},
            {true,  true,  true,  false, false, false},
            {true,  true,  true,  true,  true,  true},
            {false, true,  true,  false, true,  true},
            {false, true,  true,  true,  false, true},
            {false, false, false, false, false, false}
        };

        System.out.println(canTravelTo(gameMatrix, 3, 2, 2, 2)); // true, Valid move
        System.out.println(canTravelTo(gameMatrix, 3, 2, 3, 4)); // false, Can't travel through land
        System.out.println(canTravelTo(gameMatrix, 3, 2, 6, 2)); // false, Out of bounds
    }
}

Des idées de projet : -IA et Cybersécurité : Détection de menaces avancées avec des modèles de Deep Learning -création d'une plateforme de stockage décentralisé et sécurisé pour les données sensibles -Analyse des vulnérabilités des protocoles IOT -Analyse des vulnérabilités liées aux Framework web populaires

man 2 times

This is generally enough to get a precise overview of each thread user/sys/idle times without much hassle.

Don't rely on the children times in the uts struct, they are only accounted when a child has exited and been waited for.

In your scenario, since you don't have administrator privileges to create custom event log sources and names, you are constrained by what the system already has available for logging. The Write-EventLog cmdlet requires a source to be registered before it can write to a log, and trying to use a source that doesn't exist or isn’t registered will throw the error you encountered.

Unfortunately, without administrative rights, you cannot register new event sources using New-EventLog. However, you can still write to the existing logs if you identify the logs and sources that are already available to the user.

This may happen because you have not added the identifier of the path where this file is located to the include in tsconfig.json. I also encountered this problem, and finally found out about it through a very accidental prompt. And there is no need for the require import method.

Spotify deprecated several API endpoints on November 27th 2024. The get-audio-features was one of those endpoints.

This in turn affected spotipy as well.

I confirm that adding a blank hatch, as suggested by @HMH1013, works well:

ax2.contourf(da.lon, da.lat, mask, hatches=['', '.'], alpha=0)

That behaviour only started to happen in a recent version of Matplotlib for me.

Try to move the document to %USERPROFILE% (C:\Users\xxx), then run uninstall again.

I tested this case in detail, and experimentally found out the following:

If you marshal out a parameter that.

1. has a meaningful type that does not allow null without an explicit Nullable wrapper that is not supported by the marshalizer (e.g. float).
2. Declared in the marshalizable library as float* (a pointer to a memory region that may be empty)

Thus, if the marshalizable function writes null there, then in C# the value of such a variable will be 0 (since out will declare it as 0 when initializing the variable, and null will simply not be written).

As a result, we will have out float = 0 without any error on the part of dotnet, so, answering your own question, in this case you can disregard the compliance with the original documentation and use the more convenient variant with out float instead of out IntPtr, but keep in mind that in case of an error, in the place where null should be, there will be 0.

I hope I was able to explain it in a clear way, and that people who have the same question will understand me.

I would be glad if people who are more knowledgeable in the subject would complement me if I have made a mistake.

Based on the code provided, here's what you can focus on to resolve the events not showing up in production. Since tasks are working correctly but events aren't, and both use similar patterns, the key difference likely lies in how the events data is being handled in the frontend. First, verify that your events API endpoint is being called correctly in production by adding more detailed logging in your events route handler. Then, check that the date handling in your Event model is consistent between environments.

Here's what to implement: Add comprehensive logging in your events route to track the exact data being sent, ensure your frontend is using the correct API URL for events (similar to your tasks implementation), and verify that the date formats are being properly parsed when creating Event objects. You can also add a specific date format validation in your Event schema to ensure consistency across environments. The fact that tasks work while events don't suggests the issue is specific to the event data handling rather than a general API connectivity problem.

setting the --dpi 200 did the trick to solve the issue !!

Facing the same issue did you find any fix.

The {% for %} block of flask template would iterate over every item in your data (returned by get_hidden_interests) as is, so it's your task to prepare the correct data. Judging from the meaning of total_items and total_pages you might have mistakenly pass the whole database to it, instead of only required page of it. And get_hidden_interests accepting page and per_page feels like it should do the job, so there might be errors there.

Steps for you:

Sort Object Keys Alphabetically (Case-Insensitive): Use Object.keys() to get all keys of an object and sort them with .sort(), using localeCompare for case-insensitive comparison. Apply this recursively for nested objects.

Preserve Original Structure; Make sure arrays remain arrays and objects remain objects. Use a recursive approach to traverse and process each element based on its type (Array.isArray() and typeof).

Remove Duplicate Objects: Serialize objects using JSON.stringify() and use a Set to store and compare them. This will help you remove duplicates while keeping the first occurrence intact.

Remove Empty Properties: Define a helper function to detect "empty" values like null, undefined, empty arrays, or objects. Use this function recursively to clean up unwanted properties from your data.

You can look-up everything to understand it here:

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Object/keys

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/sort

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Set

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/JSON/stringify

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Guide/Working_with_Objects

When I tried to add an ed25519 key to Jenkins to authenticate with a key, Jenkins would refuse it as an unsupported key format. This is Jenkins 2.487 with a current sshd plugin on Debian bookworm (12.8).

After a long struggle and feedback by several very helpful testers I think that I have found a reliable way to implement a CompanionDeviceService with startObservingDevicePresence.

In regard to your question, the behavior differs wildly across different Android versions and I highly recommend to test it on several devices. However, you should in any case start coroutines to handle your communication and (if applicable) show a notifiation to act as a foreground service and only use onDeviceAppeared as a launcher and onDeviceDisappeared as a hint on when to clean up.

However, things are complicated, so allow me to use this to share all my findings.

Background

For a few months now I am working on an open source BLE remote control for Sony cameras. I implemented it as a CompanionDeviceService and rely entirely on startObservingDevicePresence to start it. At the time of writing this, Android 15 is the most recent OS and I support a minimum of Android 12 (earliest startObservingDevicePresence). I am running a public beta and am confident about it enough by now to hopefully do a "proper release" in 1-2 weeks.

So, all of the following refers to BLE and you can find the code and user feedback I refer to on github.

How onDeviceAppeared/onDeviceDisappeared behaved in my tests

I have tested my app on a Pixel 6 with Android 15, a Pixel 3 with stock Android 12 and various LineageOS 20/21 images and on a few other Android 12 devices. I also got some logs from users with Android 14 devices and a Pixel 9 Pro with Android 15.

Across these devices I have found at least 4 different patterns for the onDeviceAppeared/onDeviceDisappeared callbacks:

• Android 12: If the device is already on, onDeviceAppeared is called immediately after startObservingDevicePresence, but there is no matching onDeviceDisappeared when it is turned off for the first time. Turning the device on again, reliably triggers an onDeviceAppeared and turning it off again triggers onDeviceDisappeared within a few seconds.

• Android 13 and early Android 14: These generate a single onDeviceAppeared event when the device is turned on, but it takes at least 2 minutes (sometimes even 3 minutes) until onDeviceDisappeared is called.

• Later Android 14 and Android 15: At some point, the 2 minute delay was removed and the behavior once again changed fundamentally. Now, onDeviceAppeared is called twice with two matching onDeviceDisappeared. As I found in the Android source and got confirmation on the Android issue tracker these correspond to internal calls to onDevicePresenceEvent with different event types EVENT_BLE_APPEARED and EVENT_BT_CONNECTED (and EVENT_BLE_DISAPPEARED and EVENT_BT_DISCONNECTED respectively). So, you will get an onDeviceAppeared when the device is seen in a scan and another onDeviceAppeared when you connect to it (not sure why that should be of any help). Similarly, the first onDeviceDisappeared corresponds to a disconnect and you get a second one when the device stops appearing in scans (after a little timeout).

• Android 15 / Pixel 9 Pro: If I had not seen the log of a Pixel 9 Pro I would not have believed it, but one of my users has seen another entirely different behavior. On his device, onDeviceAppeared is called twice as mentioned above, but then onDeviceDisappeared follows reliably after 10 seconds while the device is still connected and working. This may be partly a problem with this Bluetooth device (different camera model), but the connection does not drop and hence I don't think the call to onDeviceDisappeared is warranted. The device remains functional until it is really turned off, when onDeviceDisappeared is called a second time.

Takeaways

• You cannot simply look at onDeviceAppeared and onDeviceDisappeared and map a simple connect/disconnect or service start/stop to it.
• Only the "outer" events (first onDeviceAppeared and last onDeviceDisappeared) are relevant. The other ones are much clearer communicated in onConnectionStateChange of your BluetoothGattCallback.
• You cannot expect to receive anything when the device is turned off. At least not in a reasonable amount of time that a user would understand.

The best solution seems to be to use the "outer" onDeviceAppeared and onDeviceDisappeared events to start/stop a service, but handle actual Bluetooth disconnects and reconnects independently inbetween. I think that this is actually the intended way to use these events: As indicator for when to start or stop the service. In fact, I think that these indicate the time during which you have the priviledged state of a companion service and are very unlikely to be killed. But the very different ways the events occur on different Android version and the barely existant documentation makes it really hard to figure out what you can expect. Even worse, the additional events since late Android 14 mean that you will have to ignore some cases.

My solution

So, I ended up literally counting the onDeviceAppeared events to only react to the first onDeviceAppeared and the last onDeviceDisappeared. I initialize my Bluetooth classes and call connectGatt on the first onDeviceAppeared. I free resources and terminate the service on the last onDeviceDisappeared (although, I think that Android would kill it eventually anyway).

Inbetween I let the "autoConnect" parameter of connectGatt keep the connection alive and observe its state through onConnectionStateChange of my BluetoothGattCallback. Especially any online/offline notification for the user is based on this. I actually even remove the notification when the device disconnects, so the users sees my service vanishing immediately (even though on Android 13/14 it actually stays around for a few minutes). So far, this seems to work well enough.

Note that this is not perfect for the Android 12 case where there is no matching onDeviceDisappeared after the very first connection. If you need that, you might have to handle Android 12 separately, but otherwise this only means that your service will stick around a bit longer afer the first startObservingDevicePresence and will eventually be cleaned by the system anyway

Also note, that according to the response I got on the Android issue tracker things might become easier with Android 16 when you can directly use onDevicePresenceEvent instead, but it will be a while until enough users have Android 16 to rely on. So, readers from the future with your fancy flying cars: Is it now nice to write BLE apps for Android or do you have more yearly API changes to worry about as we have seen since Android 4?

Do you have any fix for sqlite? Thank you.

Why not use:

Test-Path (path goes here) -ErrorAction Stop

to generate a trappable exception that you can handle? That way, you don’t have to comb through the error record for the specifics?

android:layout_alignWithParentIfMissing="true"

Yes, you can run Google Colaboratory notebooks from VS Code using the jupyter extension or through the VS Code integration with Google Colab via the Google Colab API. This allows you to edit and run code in Colab from within your local VS Code environment.

The problem is solved by adding the below statement in "gradle.properties" file located in [App_name] > android > gradle.properties The statement that is added,

org.gradle.java.home=C:/Program Files/Java/jdk-17.0.x

The right side of equal sign is the location of JDK. Change the location accordingly. Thanks

Chromes new tab URL is:

chrome://new-tab-page

At least for NextJS 14 I have found some problems using server actions as fetcher, for some reason sometimes it didn't fetch data when changing the server action. Suppose that we have an object DataSource = { getRows: async (params: GetRowsParams) => await serverAction(params.filter, params.sort, params.pagination); }

Now we put it as useSWR(params, dataSource.getRows);

If I have a client component with this hook, and use it in two or more pages with different data source objects, the data could get stale and useSWR won't fetch for the new server action. It could be for several reasons, one of them could be the ID of server actions, suppose that we have two files: users.ts and schedules.ts, if both files have 4 server actions and we make an index.ts file exporting all of these server actions, it will find an error for server actions $$ACTION_1, $$ACTION_2, $$ACTION_3, $$ACTION_4, as NextJS assign these IDs for the server actions of each file, so, if the useSWR sees them in the same way, it won't detect changes on the fetcher and hence won't fetch new data. So I recommend to make the server action a regular function and put it in a route handler, then use the fetch API.

In my case, the problem was coming up because I had two database servers running on the same machine: [1] Postgresql 14 which uses scram-sha-256 and [2] Postgresql 9.6 which uses md6. So I needed to specify the port number, and it worked!

$psql -U postgres -d dbname -p 5523  -f *path/to/file*

body{background-image:url("Enter your image location");}

Not all websites allow automated access

Hey @MITHU, the reason you are getting ConnectionError is because some websites simply don't allow automated access to prevent from bots. You can check that by using webiste_url/robots.txt Usually they would have something like below:

User-agent: *
Disallow: /

You can try out this working example:

import requests

url = 'https://github.com/'

headers = {
    'accept': 'text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,*/*;q=0.8',
    'accept-language': 'en-US,en;q=0.9',
    'user-agent': 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/131.0.0.0 Safari/537.36'
}

with requests.Session() as session:
    session.headers.update(headers)

    response = session.get(url)

    print("Status Code:", response.status_code)
    print("Page Snippet:", response.text[:500]) 

I search and saw some solution, but they are too simple. My code is from: https://www.gradio.app/guides/creating-a-custom-chatbot-with-blocks , like below:

It is very common to get current session user in bot function, but bot function cannot get Request parameter, I don't know how to get session information in bot function. Their demo only has very simple case, does anyone know how to get request in this case? Thanks!

def add_message(history, message):
for x in message["files"]:
    history.append({"role": "user", "content": {"path": x}})
if message["text"] is not None:
    history.append({"role": "user", "content": message["text"]})
return history, gr.MultimodalTextbox(value=None, interactive=False)

def bot(history: list):
    response = "**That's cool!**"
    history.append({"role": "assistant", "content": ""})
    for character in response:
        history[-1]["content"] += character
    time.sleep(0.05)
    yield history


with gr.Blocks() as demo:
chatbot = gr.Chatbot(elem_id="chatbot", bubble_full_width=False, type="messages")

chat_input = gr.MultimodalTextbox(
    interactive=True,
    file_count="multiple",
    placeholder="Enter message or upload file...",
    show_label=False,
)

chat_msg = chat_input.submit(
    add_message, [chatbot, chat_input], [chatbot, chat_input]
)
bot_msg = chat_msg.then(bot, chatbot, chatbot, api_name="bot_response")
bot_msg.then(lambda: gr.MultimodalTextbox(interactive=True), None, [chat_input])

chatbot.like(print_like_dislike, None, None, like_user_message=True)

demo.launch()

Hello my friend long time I want to tell my story and the girls you search this number can't see anything +971504347899 she in my family but my be seeker yousing my number and email and showing in my be group in I can't tel mor you can't check my friend you can see anything 😰 I want to tell she's family but I can't iwant anything because on mor time I'm telling she's mother but not believe me this brother Tel me I'm report to polic fur you my sister Claire I don't no she's give young sister one more time I don't no she's hacking my mobil sumbuy in group any time showing body in cam after download in twwit and Flickr wiki tomuc site one time challenge me in hospital open cam and one boy showing and she's using my mobile address I can't listen to voice in my mobile phone long story but my lungoch I want to speak Arabic. Anything mor time after transfer English

No No Pend Nama NPM Kelas Keterangan 1 I241962 A Farhan Assidqi 10824001 1MA01 S1-Ilmu Komunikasi Pagi Depok 2 T241585 Adiendha Putri Lasyalwa 10824011 1MA01 S1-Ilmu Komunikasi Pagi Depok 3 I242166 Ahmad Fauzan Elvansyah 10824038 1MA01 S1-Ilmu Komunikasi Pagi Depok 4 I246271 Amanda Aprilia 10824086 1MA01 S1-Ilmu Komunikasi Pagi Depok 5 T242537 Annisa Dwi Kasyafani 10824123 1MA01 S1-Ilmu Komunikasi Pagi Depok

Actually, the link you posted in the past received a new answer in Aug 2024. This one: https://stackoverflow.com/a/78876788/9151070

The suggestion is to use --collect-datas=fake_useragent in the pyinstaller. I was facing the same issue as you and this suggestion fixed it. Example:

pyinstaller --collect-datas=fake_useragent --onefile -w my_project.py

dotnet new classlib -o ApplicationName

Try resetting the app cache. If you are in windows you have to create a environment variable by creating going to windows registers

SSL Certificate Issues:

Check if your SSL certificate is still valid. An expired certificate will trigger this error. If the certificate is installed incorrectly or doesn't match your domain name (e.g., it’s for example.com but your site is www.example.com), you’ll get this error.

If the certificate is self-signed or from an untrusted authority, browsers may block the connection.

I encountered the same issue with the module pyscreeze, I tried to downgrade the Pillow package version from 11.0.0 to 10.4.0 and it worked.

No, they should not be globals.

Here are the globals listed by Node.js https://nodejs.org/api/globals.html

It is not best practice. I would implement this using a placeholder in the video tag.

The implementation of Interaction.GetObject changed.

.NET Framework way to use GetObject with only a Class Specified:

CATIA = GetObject(,"CATIA.APPLICATION")

.NET way to use GetObject with only a Class specified:

CATIA = GetObject("","CATIA.APPLICATION")

I had Python 3.13 and got the same error when tried to install psycopg2-binary. I downgrade Python to 3.12 as per FlyingTeller recommendation and it fixed the error. Please see the answer on how to downgrade Python: https://stackoverflow.com/a/75710481/15400268

I'm also learning how to implement it. Can I ask you how to do that?

If you want to plot in a specific figure number your figure using fig1 = plt.figure(1), fig2 = plt.figure(2) etc. To plot a graph in a specific figure define axes ax1 = fig1.gca() gca = get current axis and instead of using plt.plot() use ax1.plot() to plot in the figure 1

import matplotlib.pyplot as plt

x1 = [0,1] x2 = [0,2]

y1 = [0,1] y2 = [0,-1]

fig1 = plt.figure(1) ax1 = fig1.gca()

fig2 = plt.figure(2) ax2 = fig2.gca()

ax1.plot(x1,y1,'b') ax2.plot(x2,y2,'r')

plt.show() If you want to create 5 figures use lists :

fig = [] ax = [] for i in range(5) : fig.append(plt.figure(i)) ax.append(fig[i].gca()) if the figure 1 is already opened and you want to plot an additional curve you just have to type these lines :

fig3 = plt.figure(1) ax3 = fig1.gca() ax3.plot(x1,y2,'g') fig3.canvas.draw()

I'll try to summarize the comments under you post and add my two cents:

Your question is too broad to be answered simply:

• Is the processing time "normal"? Maybe, this is a very specific use case
• Are there any specific optimizations? Maybe, but don't expect people here to go through the entire Github repo to give you answers
• Are there any specific hardware requirements? Not really but your config is not tailored for heavy scientific computations
• Would using Python 3.11 instead of 3.6 improve performance? Likely not or not by a large margin
• How to improve the processing speed? Most likely by relying on built-in libraries for scientific computing (e.g. Numpy operations) the most you can

From there you have two options IMO:

• Deep dive into the code and analyse the bottlenecks, i.e. the parts that take the most time. You can use a profiler to do this. Then try some common optimization techniques. If you still have specific questions then come back here.
• Do nothing. I understand that you are not a computer science major. Do you really need to spend time trying to optimize this code? Couldn't you for example run these simulations overnight or during your lunch break?

I found that I needed to simplify how I copied from the const TValue to a local variable so I could access the contents without getting the error regards Value being const but function not.

This code did not make MyValue = Value, it changed it to a "tkRecord" type.

TValue MyValue;
#ifndef __clang__
  MyValue = TValue::_op_Implicit(Value);
#else
  MyValue = TValue::From(Value);
#endif
bool myVal = MyValue.AsBoolean();

All I actually needed to do was simply copy the value into my own variable. Then I could access the Kind and determine what type the TValue is.

TValue MyValue = Value;
System::Typinfo::TTypeKind Kind = MyValue.Kind;

In my case I found Kind was "tkString", once I knew this, I was able to do a string compare to determine the boolean value "True" and "False".

I had the similar problem. The package.json::devDependencies were in docker ignored, because the $NODE_ENV environment variable was set to production.

The

npm install --production=false

solved the problem.

read more about the solution here: https://impetusorgansseparation.com/ianbi3jc?key=34c29b515c616d5e290c09a87949387a

read more about the solution here: https://impetusorgansseparation.com/ianbi3jc?key=34c29b515c616d5e290c09a87949387a

read about this from here: https://impetusorgansseparation.com/ianbi3jc?key=34c29b515c616d5e290c09a87949387a

more details are here: https://impetusorgansseparation.com/ianbi3jc?key=34c29b515c616d5e290c09a87949387a

Idk what game we’re waiting for but I wanted to join a waiting list. So here I am. My rendition of a bucket list; giving myself something to look forward to instead of finding something new to cross off

:)

Below code might help the people who started learning nextjs api calls. to get dynamic routing id.

app/api/events/[event]/route.js
export async function GET(request, { params }) {
  const slug = (await params).event //event id
}

this slug will return to get [event] value

Oh man, adding module to Vtiger top menu not super hard, but kinda confusing if you're new. So, first, you make the module, yeah? Like in /modules/ folder. Add all files there, PHP stuff. After that, go to database, table vtiger_tab. Add a new row for your module name. Make sure it has isentitytype=1, so Vtiger knows it's legit.

Then for menu, there's a table called vtiger_parenttab. You add your module to a category there, or it won't show in the top menu. If still invisible, clear cache or log out/in. About WhatsApp pop-up, you'll need API, like Twilio. Pop-ups? Use Vtiger’s JS modal things. Might take time, but works if you're patient.

for the recent updates Sep 2024 and up. you need to go : C:\Users\[username]\AppData\Roaming\Google\AndroidStudio4.1\disabled_plugins.txt and empty the text file. then relaunch the IDE

Thanks to @bodo,Now I know that though I can install the package onto windows, but my ubuntu may not support the latest version. I never knew that before

The idea was correct, just the port was wrong. PIND is to be used instead of PORTD, and it makes sense: it's the input port register, from which the T0 value is taken.

$repeat 1000
   PIND=0xFF // Set PORTD high
   #800000 // wait 50ms
   PIND=0x00 // Set PORTD low
   #800000 // wait 50ms
$endrep

https://github.com/woocommerce/woocommerce/tree/trunk/plugins/woocommerce-blocks/docs/

If you dont find anything useful, remove WooCommere.

You should use classList, not setAttribute:

const p = document.createElement('p');
p.classList.add("your-class");
// do whatever you need with the new p

Replace the your-class with the class that you need to add.

All the above answers have DIFFERENT MENUs to me.

"Files -> setting -> Android SDK -> you can see the 'edit' that you can change the path of the Android SDK. -> click the download button"

No download button

"File > Setting > Appearance & Behavior > System Settings > Android SDK > [Edit] Button Click (Blue Color Link Button)"

No Android SDK button

"Open the Preferences window by clicking File > Settings (on Mac, Android Studio > Preferences). In the left panel, click Appearance & Behavior > System Settings > Updates. Be sure that Automatically check for updates is checked, then select a channel from the drop-down list (see figure)."

No drop down list

I suggest you split the task into three steps:

1. Create a temporary staging table
2. Copy CSV file/files into staging table
3. INSERT INTO my_table SELECT * FROM staging ON CONFLICT DO NOTHING

This way you will benefit from the batch insertion of COPY and still have to flexibility of SELECT statement

I have given all the required scopes but some fields were not getting updated like mobile phone, and company name when I assigned role as global administration the details were getting updated but I can't assign every one as global administrator right.(On behalf of user)

Ultimately, you probably want the POJOs to live with the interfaces, because that's what they return. Even if type inference could figure it out, it's difficult for someone reading the code to reason about it.

But answering your question as-written... I'd probably include a base POJO along with the interfaces, change your generic to something extending that POJO, and have a blank class extending that base in your individual projects.

I got same error, found out you have to await for params, like this

const {slug} = await params;

read about this in this article: https://impetusorgansseparation.com/ianbi3jc?key=34c29b515c616d5e290c09a87949387a

VS code debuggers start a new shell each time, so even if you write all the commands in the same shell, as soon as it runs with debug set to true all env variables are reset.

Looking at your scenario, one of the first things that comes to mind is what is the reason for data from one database being used in another? Are any changes needed? Will the data be manipulated

Make sure you understand the business rules first.

For me on Ubuntu 24, the text editor fails to show anything, showing error:

org.eclipse.core.runtime.CoreException: Plug-in "org.eclipse.dltk.ruby.ui" was unable to instantiate class "org.eclipse.dltk.ruby.internal.ui.editor.RubyEditor".
    at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.throwException(RegistryStrategyOSGI.java:242)

(and many hundreds of lines more, similar to this). I have downloaded the All-in-One DLTK SDK - includes binaries and source code of DLTK Core Frameworks, Ruby IDE and TCL IDE for Eclipse Platform 3.3 package (https://www.eclipse.org/dltk/downloads.php), and copied and pasted the files from the plugins and features folders to the ones of my eclipse directory.

When I also install the DLTK from Help->Install new software (all three), the script explorer shows my project folder and I can generate Ruby files etc., but I cannot configure the interpreter any more, getting this error message:

Unable to create the selected preference page.
org/eclipse/dltk/internal/debug/ui/interpreters/InterpreterPreferencePage 

My Ruby interpreter is set to usr/bin/ruby, which is what comes up for which ruby in my terminal.

Does anybody know how I could resolve my setup ?

After some investigation, I realized that since the subclassed model is just a wrapper for training two functional models, I need to:

1. Explicitly compile the functional models inside the wrapper to save their training configurations.
2. Override the call function in the wrapper model and explicitly invoke it before saving the subclassed model.

I hope this helps anyone facing the same issue in the future.

Use regex (^\n$) to find more than one empty line in a row

First try using URI not URL, it should work!

header("Location: index.php");

Try using localhost like this :

header("Location: http://127.0.0.1/Doubler/index.php");

OR

header("Location: http://localhost/Doubler/index.php");

And if using Domain then

header("Location: https://whateverdomain.com/index.php");

Try pip install faiss-gpu or pip install faiss-cpu.

Use the ZKteco Push API as documented at https://zkteco.uk/api/index.htm, which enables communication with the biometric machine without using BioTime software. Please note that this API is a paid, licensed service.

It requires push api. Please refer https://zkteco.uk/api/ for their api support from zkteco