This crash is possible even when using dequeueReusableCell by different objects inside the same method. Maybe it can save someone time..

The question is similar to the following: How to ignore double-clicks and detect single-clicks in C with GTK4 (< 4.10)? . It is therefore important that the program waits for the timeout and only then decides how to evaluate the click.

How this can be programmed, I have shown here:

https://stackoverflow.com/a/79159604/22768315.

Have fun programming.

I was struggling as well to get the actual counts. In the current UI , there might be some issue with selecting resources (I was not able to do so). Hence I used PromQL language.

1. Go to the metric explorer in monitoring.

2. select promQL on right hand side.

3. Enter this code:

sum by (response_code_class)(run_googleapis_com:request_count{monitored_resource="cloud_run_revision"})

Give the dashboard some time to refresh and collect the data , Later you can see the request cumulatively adding up based on you selected filter on time.

Better to use MudDataGrid and than you can use Format="d" parameter.

Since the inclusion of PSReadline I tend to encapsulate anything I want to paste (that's not a function) in a try/catch block; then the paste will complete before execution, even if a block inside is concluded.

Thanks to everyone who made suggestions. Especially MTO and no-comment.

In the end the following code worked:

def substring_sieve(data):
    prev, *remaining = sorted(data)
    output = [prev]
    for value in remaining:
        value = value.rstrip('/') + '/'
        if not value.startswith(prev):
            output.append(value)
            prev = value
    return output

This handles edge cases where there is a duplicate entry in the input list, and where one of the paths is a substring of another. For example: ['/home/greatlon/test_site2', '/home/greatlon/test_site']

Thanks again all!

"An Integrator key was not specified" indicates that your request was missing the Authorisation header needed to authenticate your request. I'd recommend checking if your application is setting the authorization header after obtaining the access token

Actually, if we think in terms how Postgres identify types int4, int8 and so on, then:

• int8 in C# it is long
• uint8 in C# it is ulong

https://learn.microsoft.com/en-us/dotnet/csharp/language-reference/builtin-types/integral-numeric-types

In the accepted answer int8 is mentioned as sbyte, but I hardly believe that anyone would define byte (even sbyte) as int8

Is there a faster way to move multiple blob objects from one bucket to another for gcp bucket as backup storage? i mean by using the Google Storage Transfer Service

This is a known issue: IJPL-91127 Pasting text from MS Office document into .md file creates an image

Maybe this will help you, I wrote an article about lerna + rollup settings

We can use pricehub package

Installation:

pip install pricehub

Usage:

from datetime import datetime, timedelta

import matplotlib.pyplot as plt
from pricehub import get_ohlc

now = datetime.now()
df = get_ohlc("binance_futures", "BTCUSDT", "1d", now - timedelta(days=365), now)

yep i am getting the same response for for getting follower, though the docs in no so good conveying this but we need atleast basic tier it seems..

When authenticating requests to the Twitter API v2 endpoints, you must use keys and tokens from a Twitter developer App that is attached to a Project. You can create a project via the developer portal.

{ "client_id": "29610191", "detail": "When authenticating requests to the Twitter API v2 endpoints, you must use keys and tokens from a Twitter developer App that is attached to a Project. You can create a project via the developer portal.", "registration_url": "https://developer.twitter.com/en/docs/projects/overview", "title": "Client Forbidden", "required_enrollment": "Appropriate Level of API Access", "reason": "client-not-enrolled", "type": "https://api.twitter.com/2/problems/client-forbidden" }

I don't have enough reputations to leave this as a comment.

Check this if this helps. Undoing a git rebase

You Can Command Your cache clean with this command.

php artisan optimize:clean

After that your artisan properly run with database connection.

I was able to solve this issue by opening the example/android folder in the Android Studio

You can convert the sys_time to local_time with std::chrono::current_zone()->to_local(now). Then you can convert the local_time to year_month_day.

const std::chrono::sys_days now = std::chrono::system_clock::now();
const std::chrono::local_days local_now = std::chrono::current_zone()->to_local(now);
const std::chrono::year_month_day ymd{ local_now };

I've been through and documented BOTH Windows Procedures here;

Windows SSH ‘No Matching Key’

And for macOS here;

macOS – SSH Error ‘No Matching Exchange Method Found’

If you're looking to install pip on Ubuntu, here's the detailed process I followed, which worked perfectly for me. It’s an essential tool for managing Python packages, so getting it installed correctly is crucial for any Python development. Step 1: Check if Python is installed

First, you should check if Python is already installed on your Ubuntu system. If it’s not, you’ll need to install it first. To check, open your terminal and type the following command:

python3 --version

If you see the version number of Python 3, you’re good to go. If Python is not installed, you can easily install it using:

sudo apt install python3

Step 2: Update your system

Before installing pip, it’s always a good practice to update your package list. This ensures that you get the latest version of pip available from the repositories. Run the following command:

   sudo apt update

Step 3: Install pip for Python 3

Now, you’re ready to install pip. Ubuntu provides pip for Python 3 in its default repositories, so you can install it easily by running:

sudo apt install python3-pip

This command will install pip3, which is the version of pip for Python 3. This is the recommended version since Python 2 has reached its end of life, and pip for Python 2 is not supported anymore.

Step 4: Verify pip installation

Once the installation is complete, verify that pip has been installed correctly by checking its version. You can do this by running:

pip3 --version
enter code here

You should see the version of pip that has been installed, confirming that the installation was successful.

Step 5: Installing Python packages with pip

Now that pip is installed, you can start installing Python packages. For example, to install a package like requests, you can simply run:

pip3 install requests

This will download and install the requests library from the Python Package Index (PyPI), which is the official repository for Python packages.

Additional Notes:

If you're working in a virtual environment: It’s highly recommended to use a virtual environment for your Python projects, so you can manage dependencies separately for each project. You can create a virtual environment using:

python3 -m venv myenv source myenv/bin/activate

And then use pip within the virtual environment to install packages.

Upgrading pip: If you ever need to upgrade pip, you can do so with:

pip3 install --upgrade pip

Certainly! Here’s the updated response without the span tags, written in a natural, user-friendly tone:

If you're looking to install pip on Ubuntu, here's the detailed process I followed, which worked perfectly for me. It’s an essential tool for managing Python packages, so getting it installed correctly is crucial for any Python development. Step 1: Check if Python is installed

First, you should check if Python is already installed on your Ubuntu system. If it’s not, you’ll need to install it first. To check, open your terminal and type the following command:

python3 --version

If you see the version number of Python 3, you’re good to go. If Python is not installed, you can easily install it using:

sudo apt install python3

Step 2: Update your system

Before installing pip, it’s always a good practice to update your package list. This ensures that you get the latest version of pip available from the repositories. Run the following command:

sudo apt update

Step 3: Install pip for Python 3

Now, you’re ready to install pip. Ubuntu provides pip for Python 3 in its default repositories, so you can install it easily by running:

sudo apt install python3-pip

This command will install pip3, which is the version of pip for Python 3. This is the recommended version since Python 2 has reached its end of life, and pip for Python 2 is not supported anymore. Step 4: Verify pip installation

Once the installation is complete, verify that pip has been installed correctly by checking its version. You can do this by running:

pip3 --version

You should see the version of pip that has been installed, confirming that the installation was successful. Step 5: Installing Python packages with pip

Now that pip is installed, you can start installing Python packages. For example, to install a package like requests, you can simply run:

pip3 install requests

This will download and install the requests library from the Python Package Index (PyPI), which is the official repository for Python packages. Additional Notes:

If you're working in a virtual environment: It’s highly recommended to use a virtual environment for your Python projects, so you can manage dependencies separately for each project. You can create a virtual environment using:

python3 -m venv myenv source myenv/bin/activate

And then use pip within the virtual environment to install packages.

Upgrading pip: If you ever need to upgrade pip, you can do so with:

pip3 install --upgrade pip

For anyone looking for a detailed guide on installing Python and pip on Ubuntu, especially for managing packages effectively, I highly recommend checking out this guide on how to install pip on Ubuntu. It provides more tips and tricks for setting up Python environments and making sure you have everything you need for development.

Go to top right gear icon drop down menu will be created and press settings.

Then use the search bar in the top left to type project.

Then find in the menu on the left python interpreter or project interpreter.

Click on it and press the plus near the word package.

type pytz in the search bar that appears.

Install

Socket timeout can be overridden by the OS, which is about 21 seconds for windows by default. this does not have to do with HTTP as it is valid for any TCP connection. if you want to keep the connection alive for as long as possible, you'd better write a small packet into the stream every few seconds (5 seconds or so). If the client and server are both in windows, you would most probably have your connection closed after just 20 seconds. unless there is traffic going through the TCP connection, byte by byte. if it takes longer than the timeout set in HttpClient.Timeout Property for a full HTTP packet to be sent/received, the connection will be closed.

to sum up, the timeout for the underlying TCP socket and an HTTP client behave differently and to keep a connection alive for as long as possible (HTTP Long polling), you will have to write small bytes on the HTTP stream (from the server) every few seconds (5-10)

One complete answer, due to @herrstrietzel above, is to embed the svg in an html page which responds to a uri query. We can avoid using a server by faking the response in javascript.

Given answer.html below, visiting answer.html?sq=black brings the black square into view, as required.

answer.html:

<!DOCTYPE html>
<html >
<head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <meta name="viewport" content="width=device-width, initial-scale=1.0" />
  <style>
  body
  {
    width: 20em;
    height: 10em;
    text-align: left;
  }
  </style>
<script type="text/javascript">
function init()
{
    var sp = location.search;
    if (sp.substr(1,2)=='sq')
    {
        targ = sp.substr(4);
        // alert(targ);
        scrollToSVGEl(targ);
    }
}

function scrollToSVGEl(targetId) {
  let target = targetId ? document.getElementById(targetId) : '';
  if (!target) return false;
  let {
    top,
    left
  } = target.getBoundingClientRect()
  let x = left + window.scrollX;
  let y = top + window.scrollY;
  window.scrollTo({
    top: y,
    left: x,
    behavior: 'smooth'
  });
}

// override default link behaviour
let links = document.querySelectorAll('.aSvg')
links.forEach(lnk => {
  lnk.addEventListener('click', e => {
    e.preventDefault();
    targetId = e.currentTarget.href.split('#').slice(-1)
    window.location.hash = targetId;
    scrollToSVGEl(targetId)
  })
})

</script>
</head>
<body  onload=init()>
<svg 
     xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg"
     version="1.1" width="6000" height="6000" y="0" x="0">
    <rect id="black" fill="black" height="100" width="100" y="50" x="5500">
    </rect>
    <text y="50" x="5500">black</text>
    <rect id="red" fill="red" height="100" width="100" y="5500" x="5500">
    </rect>
    <text y="5500" x="5500">red</text>
    <g id="green">
        <rect fill="green" height="100" width="100" y="5500" x="50">
        </rect>
    <text y="5500" x="50">green</text>
    </g>
</svg>
</body>
</html>

The node-debug command was provided by the node-inspector package, which has been deprecated. For debugging Node.js applications, the built-in Node.js debugger or modern tools like Chrome DevTools are now recommended.

It is a good practice to always use schema name with Table in a SQL query. It will also help you to make this query faster.

For individual files the Metadata tab features a download URL. To access it go to the dataset's page, open the page for the desired file and then switch to the Metadata tab.

I've experienced disappearing Split and Design sections in Editor. What helps me: Go File -> Invalidate caches.. Android Studio will be restarted.

You have to abort your rebasement git rebase --abort

If you already applied your rebasement do a reflog and get back to the commit hash git reflog git reset --hard HEAD@{n}

It should work, good luck

Ok, the problem was this method:

  @GetMapping("/{id}")
  public ResponseEntity<PlanDeEntrenamiento> getPlanes(@PathVariable String id) {
    PlanDeEntrenamiento planDeEntrenamiento = planDeEntrenamientoDAO.findById(id).orElseThrow();
    return ResponseEntity.ok(planDeEntrenamiento);
  }

I have deleted it because I see there is no need for it, I had it because some test I did before and then didn't delete it. After deleting it, every put or patch to "/{id}" started working again. However, if someone can explain this to me that would be helpful.

I found a solution for this. in my next app, I used the pages directory inside a src due to this it gave me this error. when I changed the name of the pages directory then this error was solved.

Very similar problem - MobaXterm RDP session from another RDP session not using MobaXterm. Mouse works when using my laptop screen, but when I drag my 1st RDP Window to 1 of either of my connected monitors, the mouse no longer works in my MobaXterm session. Pointer moves, but I cannot click on anything in the session. The mouse wheel and right click appear to be fine.

In your code, you were using the ml-auto class on the element, which applies margin-left: auto. To center the content horizontally, I changed it to mx-auto, which applies margin horizontally on both sides (margin-left: auto; margin-right: auto).

Your original code classes: navbar-nav ml-auto nav-fill

Updated Code classes: navbar-nav mx-auto nav-fill"

Seems like the issue in my case was the negation -@jobId, NOT operator seems is not utilizing the index efficiently.

Used @jobId:[0 jobId-1] instead solved the performance issues >10ms.

The issues you are encountering arise from the complexity of the query, the extensive use of EXISTS subqueries, and potential inefficiencies in indexing and optimisation within MySQL.

What Causes MySQL to Stall in the "Statistics" State?

The "statistics" state signifies that MySQL is calculating execution plans for the query. This phase can be particularly resource-intensive when:

• Numerous subqueries (EXISTS) are involved, each requiring filtered scans over large datasets.
• MySQL evaluates multiple combinations of join strategies due to the complexity of the query.
• Indexing is insufficient, resulting in excessive data scans.

Is This the Most Efficient Way to Query the Data?

Not entirely. While EXISTS is suitable for some situations, the sheer volume of subqueries in your example risks overburdening the optimiser. This can lead to significant inefficiencies, particularly when working with billions of records.

To improve this I would:

1. Use composite indexes for the property_value_* tables covering (attribute_id, value, aid, deleted_at)
2. Replace multiple EXISTS subqueries with JOINs and conditional aggregation like

    SELECT COUNT(DISTINCT properties.aid)
    FROM properties
    LEFT JOIN property_value_strings pvs1 
        ON pvs1.aid = properties.aid 
        AND pvs1.deleted_at IS NULL 
        AND pvs1.attribute_id = 48 
        AND pvs1.value = 'NC'
    LEFT JOIN property_value_strings pvs2 
        ON pvs2.aid = properties.aid 
        AND pvs2.deleted_at IS NULL 
        AND pvs2.attribute_id = 14 
        AND pvs2.value = 'Wake'
    LEFT JOIN property_value_numerics pvn 
        ON pvn.aid = properties.aid 
        AND pvn.deleted_at IS NULL 
        AND pvn.attribute_id = 175 
        AND pvn.value BETWEEN 200000.0 AND 1000000.0
    -- Add additional joins as necessary
    WHERE properties.deleted_at IS NULL
    GROUP BY properties.aid
    HAVING COUNT(pvs1.id) > 0
       AND COUNT(pvs2.id) > 0
       AND COUNT(pvn.id) > 0;

3. Partition the tables - partitioning can significantly reduce the amount of data scanned in each query

.max(Comparator.naturalOrder())

@Yanis-git can you please update read me with your solution. thank you

Yes, you can use Kotlin's Deferred to return a suspended response in a REST request. By leveraging Kotlin's suspend functions, you can asynchronously handle network calls. The Deferred object allows you to manage the result of a long-running task, ensuring efficient handling of REST responses in a non-blocking way.

I have the same issue after I upgraded my KB to the last version GX 18.

When I consume the Web service deployed in GX 17 it works, but after the upgrade I have the same.

Have you solved the issue?

I found a website that teaches object recognition training here, you can refer to it Hướng dẫn chi tiết cách huấn luyện dữ liệu tùy chỉnh với YOLO5

and more Ứng dụng mạng SSD300 vào nhận diện đối tượng

I have the same problem and I have not found an extension that highlights incorrect keyword arguments. Your answer is too generic to be helpful. We all know that VS Code is an editor but what is the extension that solves the problem?

Please change the relational table name, as it already exists

relation='mail_channel_res_partner_supplier2'

The best I could do is

$nm = new Zend_Db_Table('emp');
$nm->_primary = 'your primery key column'
$count = $nm->select()->from($this->_name, 'COUNT(*)')->where("1 = 1")->query()->fetch();

you set your primary key and change condition

Finally, I came up with this command :

(using parsers to recognize nuxt vue and typescript languages)

"fix-one-rule": "eslint --fix --parser vue-eslint-parser --parser-options \"{'parser': '@typescript-eslint/parser'}\" --rule \"{'semi': ['error', 'never']}\""

this one didn't show any console error, however it didn't fix the semi-commas neither, so I decided just to use the Eslint extension, hover to one of this warnings and inside the Quick-fix, just select correct all instances of this error in this page. It is not optimal because I need to go through all the files of the project, but it is one option.

mpi4py is the standard way of writing multi-node parallel code in Python. It will require that your rewrite your code though.

This commit https://github.com/bitnami/charts/commit/9de041c92e2788a108631052aa5401a9469e3592 has made it possible to add your providers with at initContainer.

initContainers: |
    - name: keycloak-plugin
      image: my-plugin
      imagePullPolicy: IfNotPresent
      command:
        - sh
      args:
        - -c
        - |
          echo "Copying module..."
          cp -r /module/* /emptydir/app-providers-dir
      volumeMounts:
        - name: empty-dir
          mountPath: /emptydir

I had:

<select id="dateBasis" asp-for="@Model.dateBasis.ToString()" name="dateBasis" class="form-control" asp-items="@Model.dateBases" >

... and it was the ".ToString()" on @Model.dateBasis that was the cause of the error - simply removing .ToString() solved the problem

This odd behavior of Task.Delay is fixed starting of .Net7.
And in the general situation, the CancellationTokenSource.CancelAsync method was added in .Net8.

I'm late to the party but wanted to add some information in case someone else wants to do this.

If you're running your own server as a git remote, you probably want to look into the post-receive githook.

If you're using GitHub, you'll need to use GitHub Actions. The actions/starter-workflows repository has a lot of good examples of the YAML files you'll need for that.

You should checkout my enhanced free social media module 'lgf_socialfollow' for all versions of Prestashop on Github

You should checkout my enhanced free social media module 'lgf_socialfollow' for all versions of Prestashop on Github

Try TO_CHAR(TO_DATE(HOTOOFFERDATE,'DD-MM-YY, HH:MI:SS') ,'MMYYYY') = TO_CHAR(TO_DATE(PHOTODATE,'DD-MM-YY'),'MMYYYY')

Thank @Lamar!

//assuming $connect is your connection
$connect = mysqli_connect($host, $user, $password, $database);
$connect->set_charset('utf8');

It works for me, thank you very much!

The easy and safe solution that nobody mentioned would be

$firstItem = '';
foreach($object as $item) {
  $firstItem = $item;
  break;
}

If you want to disable ALL characters hightlight go to Settings --> Search "Unicode Highlight" and, in the results, change all values that are "true" to "false":

Thanks everyone for helping, the fix has been found.

The first query in the question works. It was a Database problem.

Thanks everyone for helping!!

To find the row number of a particular text value, use the jQuery .index() method.

Search for a given element from among the matched elements

Assuming it's in the 4th row,

cy.contains('tr', ':contains(text-to-find)')
  .invoke('index')        // returns position among siblings (other <tr>)
  .should('eq', 5)

In my code, the below is working!

if tokenizer.pad_token is None:
    tokenizer.pad_token = tokenizer.unk_token if tokenizer.unk_token else tokenizer.eos_token

I am assuming you are referring Spark static streaming joins. In Spark Streaming, when joining a streaming DataFrame with a static DataFrame, the static DataFrame remains unchanged throughout the streaming query's execution. This means that any updates or changes to the underlying data source of the static DataFrame won't be reflected in the join results unless the programmed for the same.

Please refer Stack Overflow discussion here - https://stackoverflow.com/questions/66154867/stream-static-join-how-to-refresh-unpersist-persist-static-dataframe-periodic#:~:text=You%20can%20trigger%20the%20refreshing,that%20refreshes%20the%20static%20Dataframe

Where is the event listener for the click added? I can't see anywhere in the code that would detect the click and then shuffle the deck. Maybe you just forgot to add this?

I have already used the formula, but I think it does not work to extract each word from the sentence. The question should be same as my expectation in the pic below.

Which formula can I use to get my expectation? Thank you.

enter image description here

Have you checked the API permissions and authentication? If you're exploring alternatives, ByteChef might simplify your workflow with visual integrations and custom code capabilities. https://github.com/bytechefhq/bytechef

For me, it kept saying failed to find repository when I pushed or pulled.

This worked for me.

File > Account Settings > Remove the github account > Then login to github account again.

Grails 7 (the next release who is under development) will be based on Spring Boot 3.3.

This is due to file validation errors in the second round of form submission. File validation errors may not occur in first form submission, after clearing all other form element validation issues, we submit form again., that time error will come in file validation part.

change your main.dart as below:

void main() async {
    WidgetsFlutterBinding.ensureInitialized();
    await Future.delayed(Duration(milliseconds: 1000));
     // I added 1000 ms, but I guess less than 1000 ms will also work.
    runApp(App());
}

can you find any solution if yes then tell others

Removing the %LocalAppData%\AzureFunctionsTools folder did not work for me. Neither did updating the toolsets.

I had to update:

• Visual Studio Build Tools 2022
• Visual Studio Enterprise 2022

Both to version 17.12.0 (using Visual Studio Installer).

Then after rebooting the computer, the Azure Function was running local correctly.

To calculate the total resistance of a circuit represented by an adjacency list of resistors, you'll need to traverse the graph and compute the total resistance based on whether the resistors are connected in series or parallel. For series connections, you sum the individual resistances, while for parallel connections, you use the parallel resistance formula. You can use DFS or BFS to traverse the graph and calculate the total resistance for each path.

For a detailed solution, check this article : https://khobaib529.medium.com/solving-electrical-circuits-a-graph-based-algorithm-for-resistance-calculations-921575c59946

How to restore an app to a Firebase project If you need to restore an app that's been removed from a Firebase project, you can do so within 30 days of the app's removal.

1. Sign into the Firebase console, and then open your project.
2. Click the Settings icon, and then select Project settings.
3. In the Your apps card, click Apps pending deletion.
4. In the row for the app that you want to restore, click RESTORE APP.
5. Confirm the changes that will occur with the restoration of the app.
6. Click Restore app.

For reference please go to How To restore your deleted Firebase Project

Can someone help me and figure out where the problem is?

You are using Fullcalendar v3, which is quite outdated - and had a significantly different API.

In v3, the event is named eventMouseover, see https://fullcalendar.io/docs/v3/event-clicking-hovering, and it passes different parameters to the callback function as well.

https://fullcalendar.io/docs/v3/eventMouseover:

Within the callback function, this is set to the event’s <div> element.

So what you need here, with v3 of Fullcalendar, is simply this:

eventMouseover: function() {
  this.style.backgroundColor = "red";
}

And the counterpart for eventMouseLeave back in v3 was eventMouseout.

(Notice that I modified the way the background color is manipulated a tiny bit here as well. Directly accessing the property you want to manipulate, is a bit "safer", than assigning a new value to the whole style object, which can have other side effects. And even better would be not to use inline styles in the first place - but add/remove a class on the element, and then let the desired formatting apply via a corresponding rule in your stylesheet.)

If you're installing 2.7.1 or older version of ruby on m1 macbook use this command:

CFLAGS="-Wno-error=implicit-function-declaration" rvm install 2.7.1

This maybe too late, but you can set the default browser on your laptop settings. If you have windows Go to Settings > Apps> Defaults > Select the browser you would like to make the default and select Set Default. Then when you press the Icon in VScode it will now open in the right broswer.

It seems that the problem was the MTU size negotiation. For some reason MTU size is always set to 517 in Android 14 even though my peripheral can handle max 247.

we checked on odoo runbot, and it's working fine in the latest 18.0 Build, so please update your odoo18 code with the latest.

With the logoutFilter.destroySession = true configuration, the web session should be invalidated at logout. And so should be deleted the @SessionScoped beans.

Can you turn on DEBUG logs on org.pac4j.jee.context.session.JEESessionStore and check if you see the log: Invalidate session: xxx?

The oracle throw ORA-01461 error if the byte size is >>> than 4000 .if string is just > 4000 it throw ORA-12899 .See screen short for reference to byte size of supplied column

From original question it is unclear the type of Schedule adopted by OP.

There is no automatic input detection and update for schedules. But, nonetheless I would suggest adoption of Connecting Builds.

In connecting build you mark the following types:

• Input
• Trigger
• Exclusion
• Target

Inputs are only providing data, Trigger are physically deciding the build' starting condition (you can configure Input + Trigger on any desired RID).

All intermediate datasets will be automatically marked as "Will attempt to build", hence automatically triggered in the flow.

Since there, you have "only" the burden of updating the schedule in order to identify the triggering datasets whenever you modify your codebase.

I have faced same issue on my project. And finally I have resolved it by removing the getTableRecordKey function.

Please try it for you. And let me know if you have any errors.

Best

dunder is an abbreviation for "double underscore" - this is in reference to the double underscore on either side of the method that Python uses to denote a special method. It is therefore used by people synonymously with special method. Does this answer the question?

попробуйте создать .sh скрипт через редактор в консоли vim/nano

Just Check Whether you HostName is correct by typing

hostnamectl

and if it shows maxim@to-be-filled-by-oem

simply type

hostnamectl set-hostname new-hostname

check again by typing

hostname

and reopen terminal

The big issue now is that there is a 9.8 scored vulnerability in DotNetZip (in the latest 1.16.0) and DotNetZip.Semverd itself is not longer maintained and thus archived by the dev.

As someone stated in the comments System.IO.Compression does not support encryption. And the only other "big" OSS library SharpZipLib seems to be unmaintained as well. So I think we have a serious problem now...

Does anyone know suitable alternatives? 7zip could be a candidate but using command line tool is not really convenient.

why don't you just count different adjacent values and add one finally. That's it.

count = 1

# Iterate through the list starting from the second element
for i in range(1, len(X)):
    # If the current element is different from the previous one, it's alternating
    if X[i] != X[i - 1]:
        count += 1

return count

Since I couldn't find any reason why Docker is keeping this cache, I used the following workaround in case other users are facing the same issue with the same type of project.

I stopped using the management command and the dedicated app cron container.

I moved those management commands to REST views that only a specific user with a specific auth token can launch.

I created a new simple container for a cron job that performs curl requests on those URLs.

Everything works now.

Found it! The problem is both 'alfresco-access' and 'tagging' keys are being duplicated and you cannot such situation. Both files are core ones, inside alfresco standard libs.

So I found It had a duplicated library, alfresco-repository-20.X and alfresco-repository-21.Y added with amps and customization to the Alfresco Installation.

I removed the oldest one and the error disappeared

Just a quick check you can do on your axios request :

When creating an api with NestJS it come with the globalPrefix variable like this :

app.setGlobalPrefix(globalPrefix); // <= This variable
const port = process.env.NX_RC_PUBLIC_API;
const hostname = '0.0.0.0';
await app.listen(port, hostname);
Logger.log(
   `🚀 Application is running on: http://${hostname}:${port}/${globalPrefix} | Version : ${process.env.VERSION}`
  );

Did you check you don't forget to add this to your request ?

When generating with NX for exemple the most common is "api" so you request should look like :

const response = await axios.post('http://localhost:3000/api/naptime/create', createNapTimeDto);

i find a solution, just use xib for your cell, no need to modify your constraints, u just find the cell resizing work well with the compositional layout, i do not know why, but it works

works for me

As your doing a project of UCSD's "Object Oriented Programming in Java" Course, In the HelloWorld class comment out this code

AbstractMapProvider provider = new Google.GoogleTerrainProvider();

and this code in Offline part

provider = new MBTilesMapProvider(mbTilesString);

and remove the Provider in this code

map1 = new UnfoldingMap(this, 50, 50, 350, 500);

This does not use the google as a provider, and uses UnfoldingMap to display the map. Be sure that your using Java 8 and have a main method in the class

public static void main(String[] args) {
        PApplet.main("module1.HelloWorld");
}

Refer to this link: https://github.com/tillnagel/unfolding/issues/145#issuecomment-596135265

sorry, I might ask a stupid question. But to the change in the github solution would be about adding dbc files to the .exe when bundling it no ? What about if I don't want to do that because I build this .exe I would build is planned to be distributed to people using each different .dbc files I do not possess in advance and therefore I cannot add to my .exe at the time I bundle it ? @Danielhrisca

ok, all I had to do was db.Table("user_temp").AutoMigrate(&UserTemp{})

Try the answer to this: Install IPOPT solver to use with pyomo in windows You can download the executable manually from: https://www.coin-or.org/download/binary/Ipopt/ and add it to:C:\ProgramData\Anaconda3\Library\bin or your environment.

Having the same problem, I want to share my solution using Vanilla Javascript, so no need to use jQuery.

In Contact Form 7 having a select field like this:

[select* my-select-field class:form-control first_as_label "Please Select Option" "Option 1" "Option 2" "Option 3 is not selectable"]

Assumng the CF7 form has class .wpcf7-form

<script type="text/javascript"> document.addEventListener('DOMContentLoaded', function() { var selectElement = document.querySelector('.wpcf7-form select[name="my-select-field"]'); var lastOption = selectElement.querySelector('option[value="Option 3 is not selectable"]'); lastOption.disabled = true; }); </script>

Paste javascript code at the bottom of your contact form 7 after submit button. Enjoy.

could you please help me with such a problem.

@ZynoxSlash

this is what i updated to but still doest show the expected output

            // Display command categories if no specific command is provided
            const categories = Object.keys(categorizedCommands);

            // Create the initial embed
            const helpEmbed = new EmbedBuilder()
                .setColor('#5865F2') // Discord's blurple color
                .setTitle('📜 Command List')
                .setDescription('Select a category to view its commands:')
                .setThumbnail(interaction.client.user.displayAvatarURL())
                .setTimestamp(); // Adds a timestamp at the bottom

            // Function to update the embed with commands from a specific category
            const updateEmbed = (category) => {
                const commandList = categorizedCommands[category]
                    .map(command => {
                        let commandDisplay = `**/${command.data.name}**: ${command.data.description}`;

                        // Handle subcommands
                        if (command.data.options && command.data.options.length > 0) {
                            const subcommandsDisplay = command.data.options
                                .filter(option => option.type === 1) // Subcommand type
                                .map(subcommand => {
                                    const subcommandOptions = (subcommand.options || [])
                                        .map(subOpt =>
                                            `    - **/${command.data.name} ${subcommand.name} ${subOpt.name}**: ${subOpt.description}`
                                        )
                                        .join('\n');

                                    return `  - **/${command.data.name} ${subcommand.name}**: ${subcommand.description}` +
                                        (subcommandOptions ? `\n${subcommandOptions}` : '');
                                })
                                .join('\n');

                            commandDisplay += `\n${subcommandsDisplay}`;
                        }

                        return commandDisplay;
                    })
                    .join('\n') || 'No commands available.';

                helpEmbed.setTitle(`📋 Commands in ${category.charAt(0).toUpperCase() + category.slice(1)}`)
                    .setDescription(commandList);
            };```

Well, I ended up just removing associacion definitions from proxy table to get rid of circular dependency. Not sure if it will work for long, but what I'm totally sure is that choosing both Sequelize and Typescript was a terrible mistake.

o change the context menu font in Visual Studio Code using custom CSS, you'll need to use a custom extension called "Custom CSS and JS Loader". However, keep in mind that modifying VSCode's UI with custom CSS can interfere with future updates and the stability of the editor

What if I want to send a congratulatory email to that customer?. Thank

After extra attempt I was able to solve the issue by following answer on question below. Realtime database emulator ignores database.rules.json

1. created realtime database rule file called database.rules.json and wrote below

   { "rules": { ".read": false, ".write": false, "test" : {".indexOn" : ["t"]} } }

2. on .firebaserc file added database setting

3. on firebase.json added database setting

I consistently get shorter paths when the weight parameter is named weight:

import shapely
import networkx as nx
import matplotlib.pyplot as plt

# Make a 10x10 grid

vert = shapely.geometry.MultiLineString([[(x, 0), (x, 100)] for x in range(0, 110, 10)])
hori = shapely.affinity.rotate(vert, 90)
grid = shapely.unary_union([vert, hori])

params = ["weight", "distance"]
paths = []

for param in params:

    # Turn it into a graph

    graph = nx.Graph()
    graph.add_edges_from([(*line.coords, {param: line.length}) for line in grid.geoms])
    
    # Select nodes and visit them via TSP
    
    nodes = [(20., 20.), (30., 30.), (20., 80.), (80., 20.), (50., 50.), (60., 10.), (40., 40.), (50., 40.), (50, 30)]
    
    path = nx.approximation.traveling_salesman_problem(
        graph,
        weight=param,
        nodes=nodes,
        cycle=False,
        method=nx.approximation.christofides
    )
    
    paths.append(shapely.geometry.LineString(path))

# Plot results

fig, axes = plt.subplots(1, 2, figsize=(10, 5), sharey=True)

for ax, param, path, c in zip(axes, params, paths, ["b", "r"]):
    for line in grid.geoms:
        ax.plot(*line.xy, c="k", lw=.25)
    ax.scatter(*zip(*nodes), c="k")
    ax.plot(*path.xy, c=c)
    ax.set_title(f"Param={param}, length={path.length}")
    ax.set_aspect("equal")

or with cycle=True:

So it looks a bit like a bug to me at the moment.

Close vscode and open it again, or close the file and open it again. It worked for me

uninstall the current version of langchain-core and install

langchain-core-0.3.18 langchain_openai-0.2.8 tiktoken-0.8.0