were you able to solve this? if so, can you share the solution

It seems, Chrome 133 supports 4 digits after decimal point.

99.9999% remains unchanged. 99.99999% is rounded to 100%.

e souhaite sécuriser mon PC en générant une clé de sécurité. Mon objectif est d’empêcher tout accès non autorisé, soit en chiffrant mes fichiers, soit en utilisant une clé pour l’authentification. Quels outils et méthodes recommandez-vous pour générer et gérer une clé de sécurité efficace sur Windows/Linux ?"

As per my previous comment,

from confluent_kafka import Consumer

conf = {
    'bootstrap.servers': 'your broker',
    'group.id': 'your group',
    'auto.offset.reset': 'earliest',
    'enable.telemetry': 'false'  # Set to False to disable it.
}

consumer = Consumer(conf)

After spending the weekend over this, the answer is as @RubenBartelink suggested. i.e, its not "lazy(new AEM()), but rather "lazy AEM()". All works now.

Happened to me with this "hairy" lines in the smiles, this was because I rounded the corners by myself, the line was "cut"and the browser tried to smooth the lines causing this thin lines at the smile and eyebrows, try to use one figure or a figure without to much cuts.

I know this is from 2020, but someone could get help without using codes.

You can't renew a reserved instance directly, but you can set up alerts to remind you before it expires and purchase a new one in advance. https://medium.com/@techwithpatil/how-to-set-up-alerts-for-aws-reserved-instance-expiry-001b89b7af0b

In 2025, there is no need to use MediaQuery. You can fix this by changing the system language of the device.

Here is a a fix that worked for me. https://www.youtube.com/watch?v=JcEvUybwNZk

I faced the same problem. Scenario:

1. Compile MSI
2. Install program using msi
3. Remove program using the same msi

In Remove mode installer wasn't trying to stop/delete windows service (according to Event Viewer). The final result was that service .exe wasn't deleted and service was in Running state.

As my installer of previous versions wasn't ever been published, I've just changed Component GUID once, then it starts to stop and delete service.

I don't know the original reason of such behavior, but I guess that the reason is manual service deletion using MS util: https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d

• Use the actual input instead of hardcoded utf8-String:

std::string utf8String(input, length);

• Fix the regex pattern:

std::regex regexPattern("^[a-zA-Z0-9!@#$%^&*()-_+=]{6}$"); (if you want specific special characters).

or

^[a-zA-Z0-9\W]{6}$ (if you meant any 6 characters including symbols).

• Handle exceptions:

try { std::regex_match(utf8String, regexPattern); }

catch (const std::exception& e) { return false; }

I changed to the non signed version of the connection strings and placed them in local.settings.json instead of calling them directly in the function decorator argument. Seems to have resolved the issue.

No bug, just an uninformative error message.

Use this for better perfs :

export type TrueObject = object & {
  [Symbol.iterator]?: never;
  //@ts-expect-error - 'SymbolConstructor' does not exist on type 'object'
  [SymbolConstructor]?: never;
};

Did you find an answer to this? I am having the same issue. Where are you re-instantiating your connection?

if barstate.islast
label.new(
    x=bar_index,
    y=high + 50,
    text="Test Label",
    color=color.blue,
    textcolor=color.white,
    size=size.small,
    style=label.style_label_down
)

please help me fix for this code

you should use your backend as a proxy for making requests to the Autodesk Tandem API, especially if you are encountering CORS issues in production. Here's why:

CORS issues arise because the Autodesk Tandem API does not allow requests from your frontend origin directly. You can bypass this by configuring your backend (Node.js with Express) to make requests to the Autodesk API on behalf of the frontend. This way, your backend handles the CORS issue because it will not be blocked by the browser.

• Set up a route in your backend that listens for requests from the frontend.
• From the backend, make the request to Autodesk's API.
• Return the response from Autodesk back to your frontend.

we are experiencing the same issue when following this documentation: https://docs.dynatrace.com/docs/shortlink/aws-fargate#runtime.

The task runs for ~30 seconds, after which the Oneagent container's status is Stopped | Exit code: 0.

The last log is showing this row: inflating: graalnative/runtime/liboneagentgraalnativeruntime.so.hmac

what is your app? I have a solution for you

Try to create new context instead nm_client_get_main_context:

GMainContext *context = g_main_context_new();

App now architected to save memory data in local cloud storage which is very efficient and quick to read when the app is spun up again. This is a workaround to achieve some of the efficiencies desired from a persistent app in GCP - I have not figured out a way to achieve that.

tauri-app-vue % npm run tauri dev

[email protected] tauri tauri dev

Running BeforeDevCommand (`npm run dev`)

[email protected] dev vite

vite v0.10.3 Dev server running at:

http://localhost:3000 http://10.0.0.82:3000

Warn Waiting for your frontend dev server to start on http://localhost:5173/...
Warn Waiting for your frontend dev server to start on http://localhost:5173/...

set port as mentioned in vite dev server like in my case its 3000

Looking here: https://www.htmlunit.org/apidocs/org/htmlunit/WebClientOptions.html

I can see WebClientOptions.setThrowExceptionOnFailingStatusCode (so just a rename).

It was primarily done to ensure predictable performance and avoid worst-case quadratic behavior in practical applications. While quicksort was widely used due to its good average-case performance, its worst-case O(n²) complexity could lead to performance issues in adversarial or unbalanced input scenarios.

Before commiting any changes you first should stage them. Imagine that you've made changes in multiple files but you want to commit changes only in 1 file. Then you stage this file and commit the changes you've made in it. Since you haven't staged anything, you're getting an error.

for m in v:
    if v[m]=="":
        v.pop(m)

This Python code checks the dictionary named v and if the name of the key has a value of that is empty, it is removed.

Did you mean dictionaries with two or more empty fields?

count=0
for p in s:
    if s[p]=="":
        count+=1
if count>1:
    del s
count=0
for p in e:
    if e[p]=="":
        count+=1
if count>1:
    del e
count=0
for p in t:
    if t[p]=="":
        count+=1
if count>1:
    del t
count=0
for p in o:
    if o[p]=="":
        count+=1
if count>1:
    del o
#The dictionary o is deleted if it has more than one empty field i.e. more than one key with empty value.

What about using openxlsx?

library(openxlsx)

wb <- createWorkbook() # Save the workbook
addWorksheet(wb, 1)

main_headers <- c("", "", rep("value", 10), rep("share", 10))  # Top row
sub_headers <- c("year", "type", rep(LETTERS[1:10], 2))  # Bottom row

# Write headers
writeData(wb, 1,  matrix(main_headers,ncol=length(main_headers)),
          startCol = 1,
          startRow = 1,
          colNames = FALSE)
writeData(wb, 1, 
          matrix(sub_headers,ncol=length(sub_headers)), 
          startRow = 2, 
          startCol = 1,
          colNames = FALSE)

mergeCells(wb, 1, cols = 3:12, rows = 1)  # Merge "value" columns
mergeCells(wb, 1, cols = 13:22, rows = 1) # Merge "share" columns

writeData(wb, 1, my_table, startRow = 3, colNames = FALSE) # Define headers

saveWorkbook(wb, "Multiheaded_Table.xlsx", overwrite = TRUE) # Save the workbook

I don't see a "-release" or "-optimize-size" flag in your configure command.

build options

If your HDS encodes boundaries by flagging boundary faces, then it is simple: find the one edge into your vertex with a boundary face, then get the next edge along the face.

If the HDS encodes boundaries by flagging boundary edges (which I'll assume is your case since you check whether a given edge has a twin) then your vertex should have exactly one in-edge with null twin, and one out-edge with null-twin. These are the edges you're looking for.

It is possible to get audio from spotify but in a complex way Heres how i did i firstly i sent a request to spotify with the app and then it got the track then after it got the track i made it search any matching on youtube and if its found it downloads the youtube video and yeah then plays it (its a discord bot)

I am using RemoteWebDriver with Chrome, Edge and Firefox with .net.

In past month newly updated chrome and edge 131 and newer - in diffrent areas sterted to throw stalereference errors, without changing code - only browser has been updated. Switching to frame sometimes had to be done more than once to workaround such issues.

Now Firefox has been updated to v 135 and I have 'OpenQA.Selenium.JavaScriptException: Cyclic object value' right after element has been waited and found properly and same - only change was Firefox update....

It fails only on OpenQA.Selenium.Interactions.Actions and only on Firefox.

This is not related to finding element but to Browser update....

Right now only workaround I have came up with (and very ugly) is to override .Perform() function and all methods which are using it to call our Perform() with try{} catch{} block on JavaScriptException exception. It seems to work well even this exception is throwwed.

How to fix it globally? Some Firefox options to change latest Firefox to act as before with Actions?

Instead of intersperse, you could also use intercalate

import Data.List (intercalate)

insertSpace :: String -> String
insertSpace = intercalate " " . map (:[])

When I tried "man return" from a Terminal, the reply was: "No manual entry for return", but I use it in BASH functions as a "break" command out of a while loop. I don't use the exit status, but it does work to return from anywhere in the function to the Script program from where I called the function.

I also encountered the same issue while trying to update the Semantic Model for Power BI Embedded SKU A1. Despite the dataset being around 300MB, it consumed 2.7GB of memory and resulted in an error.

Upon investigation, I found a thread where the following explanation was provided:

"When many relationships are defined, it consumes more memory.Additionally, if data refresh and relationship calculations are performed simultaneously, a large amount of data is loaded into memory at the same time, leading to memory exhaustion."

Based on this, I followed these steps, and I was able to successfully perform the update using PowerBI API:

1. Perform an update using the following endpoint

   POST https://api.powerbi.com/v1.0/myorg/datasets/{datasetId}/refreshes { "type": "DataOnly" }

2. Monitor the  endpoint and wait for the dataset refresh to complete.

   GET https://api.powerbi.com/v1.0/myorg/datasets/{datasetId}/refreshes

3. Perform an update using the following endpoint

   POST https://api.powerbi.com/v1.0/myorg/datasets/{datasetId}/refreshes { "type": "Calculate" }

I hope this method works in your environment as well.

Reference:

https://learn.microsoft.com/ja-jp/rest/api/power-bi/datasets/refresh-dataset

https://learn.microsoft.com/ja-jp/rest/api/power-bi/datasets/get-refresh-history

im try to implement skype bot channel by bot framework and stuck in mention part, when i try to add the mention object into entities like the context receive from bot but maybe this just support for ms-team because if i hard code by insert in tag with id skype like 8:live.{something} (not id with 29:{something}), it's work. Nowaday the sdk already upgrade to very different from with the post but hope anyone can help me resolve this problem

To fix this, you need to add the following import to your Program.cs file:

using Microsoft.AspNetCore.SignalR;

This adds the functionality you're trying to use.

It may be due to several factors such as Kernel Launch Overhead, Memory Transfer Bottlenecks, Underutilisation of GPU Cores and Thread Divergence in GPUs. The time taken to run Kernels(functions that run on the GPU) introduces overhead, particularly for smaller workloads. If computational task isn't large enough, launch overhead outweighs the speed benefits. Also, moving data between RAM and VRAM is slow over the PCIe Bus. GPUs really shine when they can work entirely on VRAM without moving data back and forth👍

For me it worked with using G4 WWDR, and when you create the CSR, DO NOT specify a common name.

I was having the same validation error.

Also this tool helps a lot: https://pkpassvalidator.azurewebsites.net/

It sometimes gives you suggestion for how to fix your issues. For me it was a lifesaver.

How you defined pull_data_from_hdf5? I am intrested in reading from h5 files

This is not an answer. Should've been a comment

strong text Boa trade queridos resolvi o problema ao entra no site https://aka.ms/bike-rentals , ao fazer isso fez o download em zip do arquivo onde usei o arquivo local ao invez de URL. problema foi resolvido

Sadly, there does not seem to be a way to flash other libraries with uflash. I would recommend using the official python editor

8 years later: I was getting an error when generating the XLSX file, but I discovered that it was because I was using "barryvdh/laravel-debugbar," which added a small HTML/JS snippet at the end of every file to assist with development. After removing it or disabling it by setting APP_DEBUG=false, the XLSX file was generated normally. Check if there is any module adding texts that you cannot see.

in the end, I decided to go with redux query. That solved it pretty well

com.aefyr.sai.model.filedescriptor.ContentUriFileDescriptor$BadContentProviderException: DISPLAY_NAME column is null at com.aefyr.sai.model.filedescriptor.ContentUriFileDescriptor.name(ContentUriFileDescriptor.java:30) at com.aefyr.sai.model.apksource.DefaultApkSource.getApkLocalPath(DefaultApkSource.java:47) at com.aefyr.sai.model.apksource.FilterApkSource.getApkLocalPath(FilterApkSource.java:60) at com.aefyr.sai.model.apksource.FilterApkSource.nextApk(FilterApkSource.java:28) at com.aefyr.sai.installer2.impl.rootless.RootlessSaiPackageInstaller.install(RootlessSaiPackageInstaller.java:93) at com.aefyr.sai.installer2.impl.rootless.RootlessSaiPackageInstaller.lambda$enqueueSession$0$RootlessSaiPackageInstaller(RootlessSaiPackageInstaller.java:70) at com.aefyr.sai.installer2.impl.rootless.-$$Lambda$RootlessSaiPackageInstaller$ivyAcunEgIkYlu_dB2vN6MOWZPU.run(Unknown Source:6) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:463) at java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1137) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:637) at java.lang.Thread.run(Thread.java:1012)

gdb itself can be used to extract the AT_EXECFN from a core file using the info command. For example:

$ gdb -batch -core example.corefile -q -ex 'info auxv' 2>/dev/null | sed -n 's/.*AT_EXECFN[^"]*"\(.*\)"/\1/p'

/usr/bin/example

Not being fluent in C++, I followed a few examples I found and they used auto type. So did I.

auto model = tflite::FlatBufferModel::BuildFromFile(model_path.c_str());

This line is problematic. I assumed auto induced the type from the private variable declaration, but I guess it overrides it and is still accessible from other function calls.

Removing auto and just calling

model = tflite::FlatBufferModel::BuildFromFile(model_path.c_str()); works as expected.

It looks like your Appwrite endpoint or project ID is either missing or incorrectly configured, which is causing an invalid URL (undefined/account).

Check Your Environment Variables Make sure your .env.local file has the correct Appwrite credentials:

NEXT_PUBLIC_APPWRITE_ENDPOINT=https://cloud.appwrite.io/v1
NEXT_PUBLIC_APPWRITE_PROJECT=your_project_id
NEXT_PUBLIC_APPWRITE_DATABASE_ID=your_database_id
NEXT_PUBLIC_APPWRITE_COLLECTION_ID=your_collection_id

please share the code you write without your credentials so we can help you if it still exists

In the end I used dask considering a bigger chunk size and blending results for several overlapping subchunks with the size of interest.

https://docs.aws.amazon.com/cli/latest/reference/logs/start-live-tail.html Try : --mode=interactive Marvellous

This was a larger problem on my laptop related to Unable to create files from dotnet processes in Mac

I gave dotnet executable full disk access and rebooted, and all the permissions problems are gone.

Here is a script for workaround

https://github.com/klich3/sonoma-workaround-allow-services

According to multiple research, it seems Bluez is very flimsy with anything other than python-dbus. The same problem I got from using Tmds.dbus on c# was present when using python's dbus-next. Using python-dbus works flawlessly.

If someone is an expert on bluez's internal, I'd be glad to know what makes it less collaborative with other dbus clients. I checked the bluez source code, but couldn't find anything that might cause these problems.

Storing images in cloud storage (e.g., S3) instead of as BLOBs in a database offers key advantages:

• Performance - Optimized for serving large files, reduces database load, and integrates with CDNs for faster global delivery.
• Scalability - Effortlessly scalability, while databases struggle with growing binary data.
• Cost - CDN services are extremely cheap, far more cost-effective for storing large files, reducing database size and costs.
• Features - Media hosting services provide image processing, URL signing (temporary links), fine-grained access control, and durability guarantees that databases lack.

Cloud storage is purpose-built for media, making it a better overall choice.

Use Literal + Union

I think, better way is to use simple from typing import Literal

def get_info(name) -> dict[Literal["my_name"] | Literal["first_letter"], str]:
    name_first_letter = name[0]
    return {'my_name': name, 'first_letter': name_first_letter}

I tried approach mentioned in another answer but it was not working for me as I had custom transformation which was creating a huge xml file and it was very time taking. The tool mentioned in that answer was not available as well.

This is the reason I am adding this answer may be still helpful to someone facing similar issue.

There is way to use below metadata query. I tried this on Informatica PowerCenter Informatica 9.X.

SELECT * FROM REP_MAPPING_CONN_PORTS where mapping_name LIKE '%m_MappingName%';

• Above metadata query returns all the mapping ports connected from one transformation to another transformation for a mapping. Including source, target, all types of the transformation including custom transformations.

• You can filter data using Mapping_ID, Subject_Area, Mapping_Name, Mapping_Version_Number, From/TO_Object_Name(transformation names) etc. to get connected port information between transformations.

• You need to connect to Informatica database/schema where it is having other metadata stored. Normally, it is the database/schema used during installation of PC Informatica.

No guarantee that this works for all cases, but in a Drupal context (Drupal 9/Twig 2) I could successfully compare a variable to -1 in a for loop to differentiate numeric from non-numeric keys:

{% for i, items %}
  {% if i > -1 %}
    ...

Apologies that this isn't an answer, but I have the same question and didn't want to duplicate. I tried this:

private void toggleFullScreen() {
    GraphicsDevice gd = GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice();
    
    dispose();
    setUndecorated(true);
    gd.setFullScreenWindow(this);
    setExtendedState(MAXIMIZED_BOTH);
    setVisible(true);
}

The frame appears for a split second and then disappears. Absolutely no idea what I'm doing wrong.

Commenting out setFullScreenWindow and/or setExtendedState results in the same disappearing frame behaviour, just to clarify.

What you sketch as a desired table is the definition of several enums in one table. For what purpose?

I think you'll find the answer to your need in Using a table to provide enum values in MySQL?, i.e. defining enums as tables instead of using the enum type.

<dependency>
    <groupId>org.springdoc</groupId>
    <artifactId>springdoc-openapi-starter-webmvc-ui</artifactId>
    <version>${springdoc-openapi-starter-webmvc-api.version}</version>
 </dependency>

add this dep to your pom

it already exist a similar name webmvc-api add this

I've already had the same problem with an O2Switch server. Here's how to solve your problem.

In your crontab, you need to specify the full path of PHP as well as the absolute path of your project.

* * * * * /usr/local/bin/php /home/NAME/link_to_project/artisan schedule:run >> /dev/null 2>&1

This will allow the cron job to run normally.

If I understand correctly, something like this loop for constructing formulae by permuting a list of variables into a response variable and predictor equations might be helpful to you:

all_variables <- c("x1", "x2", "x3", "x4", "x5")
for (i in 1:length(all_variables)){
  combo <- all_variables[-i]
  formula <- as.formula(paste(all_variables[i], "~", paste(combo, collapse = " + ")))
  #
  # use "formula" here
  # e.g.
  # print(formula)
  #
}

Hope this helps. Best regards,

I had the same issue, fixed adding 'use client' to the top of the file.

I can't comment, so I'm answering. I had the same problem.

I simplified the project to one basic entity. I tried both the TsMorphMetadataProvider and the ReflectMetadataProvider.

My tsconfig has:

  "compilerOptions": {
    "module": "NodeNext",
    "moduleResolution": "NodeNext",
    "target": "ES2022",
  },

The error comes from: node_modules@nestjs\core\injector\injector.js:72

It only occurs when I define:

entities: ['./dist/**/*.entity.js'],
entitiesTs: ['./src/**/*.entity.ts'],

If I use the following, it will be fine:

entities: [TestEntity],

I'm not sure what is happening in NestJs at that moment though. I narrowed it down to MikroOrm because the exception is for moduleRef.name == 'MikroOrmCoreModule'

The debug log of MikroOrm states: processing 1 files, so it definitly finds the entity file.

I can't use the autoLoadEntities in my case. So I'll add the entities manually, but if someone can narrow down what's happening and how to solve it, that would be welcome.

I have found a solution!
Thank you all!
Here is my code for any other user, facing the same issue ..
php

add_action('wp_ajax_custom_tnp', 'send_form_notification');
add_action('wp_ajax_nopriv_custom_tnp', 'send_form_notification'); // For non-logged-in users

function send_form_notification() {
    if (isset($_POST['nn']) && isset($_POST['ne'])) { 
        // Sanitize and capture form inputs
        $name = sanitize_text_field($_POST['nn']);
        $email = sanitize_email($_POST['ne']);
        $message = sanitize_textarea_field($_POST['nd']); // Optional

        // Log form data to debug.log for testing
        error_log("Form captured - Name: $name, Email: $email");

        // Email recipient and subject
        $to = get_option('admin_email');
        $subject = 'New Subscription Notification';
        $body = "Name: $name\nEmail: $email\nMessage: $message";

        // Send email notification to admin
        $headers = array('Content-Type: text/plain; charset=UTF-8');
        $mail_result = wp_mail($to, $subject, $body, $headers);

        if ($mail_result) {
            error_log('Mail sent to admin successfully.');
        } else {
            error_log('Failed to send mail to admin.');
        }

        // Check if the Newsletter plugin class exists
        if (class_exists('Newsletter')) {
            $newsletter = Newsletter::instance();

            // Prepare subscriber data
            $nl_user = [];
            $nl_user['email'] = $email;
            $nl_user['name'] = $newsletter->normalize_name($name); // Normalize the name
            $nl_user['status'] = 'C'; // Confirmed subscription
            $nl_user['surname'] = ''; // Add surname field to avoid missing key issues
            $nl_user['sex'] = 'n'; // Add a default value for sex
            $nl_user['language'] = ''; // Optional, add a fallback for language

            // Add user to forced lists
            $lists = $newsletter->get_lists();

            // Log all available lists to check "corp_customers" list ID
            error_log('Available lists: ' . print_r($lists, true));

            $corp_customers_list_id = null;
            foreach ($lists as $list) {
                if ($list->name === 'corp_customers') { // Check for your specific list
                    $corp_customers_list_id = $list->id;
                    $nl_user['list_' . $list->id] = 1; // Add to corp_customers
                }
                if ($list->forced) {
                    $nl_user['list_' . $list->id] = 1; // Add to any forced lists
                }
            }

            // Log the "corp_customers" list ID
            if ($corp_customers_list_id) {
                error_log('corp_customers list ID: ' . $corp_customers_list_id);
            } else {
                error_log('corp_customers list not found.');
            }

            // Save user to Newsletter plugin
            $result = $newsletter->save_user($nl_user);

            // Check the result and handle accordingly
            if (is_wp_error($result)) {
                error_log('Newsletter plugin error: ' . print_r($result, true));
                wp_send_json_error('Failed to save email to newsletter list.');
            } elseif (is_object($result) && isset($result->id)) {
                error_log('Email successfully saved to newsletter list.');
                wp_send_json_success('Form submitted successfully, email saved to newsletter, and notification sent!');
            } else {
                // Log the complete response from the Newsletter plugin to identify the issue
                error_log('Unknown response from Newsletter plugin: ' . print_r($result, true));
                wp_send_json_error('Failed to save email to newsletter list. Unknown error.');
            }
        } else {
            error_log('Newsletter plugin class not available.');
            wp_send_json_error('Newsletter plugin is not active.');
        }
    } else {
        error_log("Form data is missing or not captured properly.");
        wp_send_json_error('Form data is missing.');
    }
}

<script>
document.addEventListener('DOMContentLoaded', function() {
    const form = document.querySelector('.tnp-subscription form');

    form.addEventListener('submit', async function(event) {
        event.preventDefault(); // Prevent default form submission

        const formData = new FormData(form);

        try {
            // Send the form data using Fetch API
            let response = await fetch(form.action, {
                method: 'POST',
                body: formData
            });

            let result = await response.json();

            if (result.success) {
                alert('Form submitted successfully!');
                form.reset(); // Clear form fields after successful submission
            } else {
                console.error('Error: ' + result.data);
                alert('Error: ' + result.data);
            }
        } catch (error) {
            console.error('Error:', error);
            alert('There was an error submitting the form: ' + error.message);
        }
    });
});

</script>

html

<div class="tnp tnp-subscription"> 
    <form method="post" action="https://mylaundryroom.gr/wp-admin/admin-ajax.php?action=custom_tnp">
        <input type="hidden" name="nlang" value="">
        
        <div class="tnp-field tnp-field-firstname">
            <input class="tnp-name" type="text" name="nn" id="tnp-1" placeholder="Ονοματεπώνυμο" required>
        </div>
        
        <div class="tnp-field tnp-field-email">
            <input class="tnp-email" type="email" name="ne" id="tnp-2" placeholder="Email" required>
        </div>
        
        <div class="tnp-field tnp-field-text">
            <textarea class="tnp-text" name="nd" id="tnp-4" placeholder="Αφήστε το μήνυμα σας" required></textarea>
        </div>
        
        <div class="tnp-field tnp-field-button">
            <input class="tnp-submit" type="submit" value="Αποστολή">
        </div>
    </form>
</div>

TaskManager.defineTask needs to be called in the global scope not within a function.

You'll probably want to have more of a delay. The API rate-limits you, as you know. The list of rate-limits can be found here.

From what I could find, it appears that Tweepy gives you Basic Access. So, no more than 15 requests per 15 minutes. Unless I'm wrong about that, your sleep time should be at least 60 seconds (I would add in a few more seconds as a buffer though to avoid accidently hitting the limit)

Some things to check:

Do you have the 'redirection' plugin installed? If so, turn it off temporarily by renaming it in the file structure.

If you don't, you will want to check for redirects in your WordPress database.

try:

queryClient.invalidateQueries({ queryKey: ["userData"] }) so that Vue Query refetches fresh data.

and queryClient.removeQueries({ queryKey: ["userData"] }) to completely clear cached user data.

My issue ended up being simple - I had misspelled the email address domain I was attempted to do a test send from! 🤦

That is because the assets need to be at the /public directory

we are also looking into it at Sentry

https://github.com/getsentry/sentry-javascript/issues/15389

I inadvertently found a way to trick it that seems to work perfectly. I was cutting and pasting the "did you mean suggestion to see if it worked and accidently pasted in the "?.com? at the end. Entering "https://siteURL:9999?.com?" strangely allows the site to be saved and it it is correctly shown as "https://siteURL:9999" in the list. I think Google is assuming the ? mark is part of an unnecessary HttpGET string and truncates it leaving you with the correct URL.

Not a specific answer, but I can't comment and thought this may be helpful enough to share.

I struggled with this exact issue for a week before finally figuring out that the file I wanted to apply inverse.transform to MUST match the original 'scaled' file regarding the number of columns. In your case above, (26768,29) (31,) (26768,29) is telling you that they aren't the same. In this case, it looks like one file is 29 columns wide while the other is '' wide. Fix that (I dropped a column that had been added between the two events) and you should be good to go.

There is no official support for Face Liveness in Flutter right now. We recently needed that feature for one of our projects, so we ended up developing it in-house (it was a bit painful). While we haven't implemented unit tests yet, we've thoroughly tested it and tried to be as detailed as possible on how to integrate it into your Flutter app. Hope it helps! If you have any feedback, we'd love to hear it. https://github.com/Webeleven/amplify-ui-flutter-liveness

In cloud shell you can run:

bq show --schema --format=prettyjson project:db.tbl

There are other dependencies that React uses outside of browser compatibilities.
Some features that are part of the core features of React such as JSX utilize Babel.

React components are essentially JSX components.

• Remember, JSX is the HTML-like code that we use to build React components.

Because the browser doesn't understand handling this directly (browsers do quite a bit these days), React makes use of Babel to compile the JSX into the Javascript and HTML that the browser can understand.

This of course isn't the only reason, but is a critical example of why Babel is necessary.

Я предполагаю, что нужно было создать одну viewModel и прокидывать зависимости и данные которые были нужны через koin module

I found the problem:

the bitness of the application is forced to 32bit even if the AnyCPU model is applied if this checkbox is checked (it translate to Perfer 32bit)

You must allow arbitrary loads over HTTP/HTTPS, enabling YouTube video playback.

1. Open (or create) Info.plist file
2. Add NSAppTransportSecurity key of type Dictionary (sets automatically)
3. Add NSAllowsArbitraryLoads of type Boolean (it sets to String by default, be sure to check!) and its value to YES

Now it should work

Please follow the below steps:

• Configure SMS/Text message
• Then change the preferred 2FA method.
• Disable Authenticator app and re-enable for the new phone

what changes i can do to my httaccess file, if im using the httpd server. My application is vite+React and getting the same error :)

The first question is how your site copied were created? If it was made by some kind of a plugin, then it seems like it doesn't link pattern properly.

If you copied sites manually, you must not forget about copying patterns as well and setting appropriate pattern IDs after that. Example of doing it programmatically you can find in this tutorial: https://rudrastyh.com/wordpress-multisite/sync-patterns-and-template-parts-across-sites.html

Maybe it can also be resolved the simple way:

1. Go to the all patterns page on your child site and check – do you have patterns copied correctly there?
2. If yes, just hover over the pattern edit URL and find out its new ID.
3. Do appropriate replacements in post content.

If there are not patterns copied to the child site, check the guide I provided the link above.

In my case I had no option to add Content-Type header, so I found another solution. It was to implement MessageBodyReader

As for 2025, you have to use G4 WWDR, and when you create the CSR, DO NOT specify a common name.

Try core.ignorecase = false

I've run into this several times with Tomcat. I think one of the setup tools/scripts seems to change between Tomcat9.exe and tomcat9.exe.

.img-container {
height: 100%;
aspect-ratio: 16 / 9;
background: url("/example.jpg") center center / cover no-repeat;
}

works with pixel values in the height too.

My problem was I was trying to download from the URL I mentioned but to get the desired response I had to add "raw" to the beginning of the url. For example: "https://raw.github.build.company.com..." Additionally I ran into another problem when I figured out that the exe file was being managed by lfs on my github repo. When making an api request for a file managed by lfs it returns a few details including the file size and sha256 not the desired file's contents. To resolve this I followed this guide https://gist.github.com/fkraeutli/66fa741d9a8c2a6a238a01d17ed0edc5.

Setting Sys.setenv(DB2CODEPAGE=1208) before calling dbConnect, and setting encoding = "UTF-8" (in dbConnect) solved it for me.

Exception: ModuleNotFoundError: No module named 'databricks.sqlalchemy'

getting this error even tho sqlalchemy is already installed

Assume Node.js is installed and ReactJS app is created.

If your application folder path is like this in windows eg: D:\workspace\ReactProjects\react-crud>npm start

Then Node.js will compile and open browser automatically with default set port 3000. If not started, you can browser http://localhost:3000/

The first query is a covered index query. The second brings in unindexed material so the engine must also go to the data.

Found out that the ORM comments before the attribute declaration were messing all up : they're out of date.

So here's what I did :

#[ORM\Column(type:"integer", nullable: true)]
private $capacity;

And now Doctrine finally detects changes.

Basically, Sylius' documentation is out of date regarding the ORM comments. I'll do an issue on the Github so it could be solved.

You need to enable jsonws on portal-ext.properties. This option is no longer a default one since DXP 7.2

I know this post is from a few years ago, but there is a solution here that worked for me

https://cmppartnerprogram.withgoogle.com/#partners

Here's the link I tried to recall previously from google for cookies. I hope this helps!

It turned out that I was missing Asp Net Core Hosting Bundle:

"The .NET Core Hosting bundle is an installer for the .NET Core Runtime and the ASP.NET Core Module. The bundle allows ASP.NET Core apps to run with IIS."

https://learn.microsoft.com/en-us/aspnet/core/host-and-deploy/iis/hosting-bundle?view=aspnetcore-9.0

Once I installed that and restarted IIS suddenly everything starts to work!

I'm facing the same issues.

As far as i understood this github: https://github.com/microsoft/vscode/issues/89758

This is a known limitation as the input replacement is a different process.

If you put: "processId": "${command:pickRemoteProcess}", behind the pipeTransport it atleast prompts the input but doesn't do the replacment in the command unfortunatly..

I had to hard code it too.

Thanks to @ThiagoAlmeida I've had confirmation that this is indeed a bug with Flex Consumption apps in Azure. His comment is below but here is the relevant section from it:

This is a known issue by the product group, the service association link is not being deleted in time and leaves that association still there (/legionservicelink is the Flex Consumption VNet integration association link).

The error only occurs for me when you deploy the Function App using Bicep and attach it to a network separately in the same script. For clarity these are the steps to reproduce the error:

1. Use Bicep code similar to below where the networking is configured after the Function App is provisioned.

resource appHost 'Microsoft.Web/serverfarms@2021-03-01' = {
  name: hostingPlanName
  location: location
  sku: sku
  kind: 'functionapp'
  properties: {
    reserved: true
  }
}

resource functionApp 'Microsoft.Web/sites@2023-12-01' = {
  name: functionAppName
  location: location 
  kind: 'functionapp,linux'
  identity: {
    type: 'SystemAssigned'
  }
  properties: {
    reserved: true
    enabled: true
    hostNameSslStates: hostNameSslStates
    functionAppConfig: functionAppConfig
    serverFarmId: appHost.id
    siteConfig: siteConfig
  } 
}

resource hostNameBindings 'Microsoft.Web/sites/hostNameBindings@2018-11-01' = {
  parent: functionApp
  name: '${functionAppName}.azurewebsites.net'
  properties: {
    siteName: functionApp_siteName
    hostNameType: 'Verified'
  }
}

resource planNetworkConfig 'Microsoft.Web/sites/networkConfig@2021-01-01' = {
  parent: functionApp
  name: 'virtualNetwork'
  properties: {
    subnetResourceId: subnetId
    swiftSupported: true
  }
}

2. Deploy the Bicep script once.

3. Observe that the Function App is created and attached to the network as expected.

4. Run the Bicep script a second time without changing or deleting the Function App.

5. Observe a 500 error related to the networking section in the deployment script.

   • The error itself doesn't give you much information about what's happened, but if navigate to the Flex app you will observe that it is no longer connected to the network, this is expected because the Bicep script creates the Function App without the network configuration, which is applied in a secondary step, given this secondary step failed the app has been refreshed without attachment to the network. This is what corrupts the subnet. In refreshing the app the Bicep script hasn't explicitly removed it from the subnet in the same way as it does for Logic Apps and other Function Apps therefore the subnet still maintains a broken link to the app and can't be edited or removed.
   • Try to manually reattach the Function App to the same subnet and observe the actual error:

   Error: Subnet xxxx is in use by /subscriptions/xxxx/resourceGroups/xxxx/providers/Microsoft.Network/virtualNetworks/xxxx/subnets/xxxx/serviceAssociationLinks/legionservicelink

Workaround

There is one workaround that I've found which has overcome this issue for us. Before running the Bicep script add a deployment step that removes the network binding from the app. Like this:

az webapp vnet-integration remove --name $appName --resource-group $resourceGroupName

Because the network binding has been explicitly removed, running the Bicep script no longer corrupts the subnet.

Microsoft have advised they are working on a fix which should be available in the coming weeks.

Observations

If you remove a Flex Consumption app from a subnet manually via the portal, or delete it via the portal, or even via the Azure CLI, the subnet does not become corrupted.

It is also possible that combining the network binding with the module that creates the app itself does not encounter the same error because the app is refreshed along with its network configuration. I haven't tested this scenario because our specific situation requires us to bind the network after the app is created.

Another viable solution to get the file-size, that works across many common-lisp implementations on a posix OS, is the package trivial-file-size.

https://github.com/ruricolist/trivial-file-size

(trivial-file-size:file-size-in-octets #P"/path/to/some/file")

I suppose the easiest way would be to have a backend (e.g. PHP) script located inside the authenticated realm that echoes back the credentials to you? Haven't tested... just an idea.