You can just use a container inside the dialog with custom BoxDecoration:

Dialog(
  child: Container(
    decoration: BoxDecoration(
      color: Colors.white,
      boxShadow: const [
        BoxShadow(
          color: Colors.red,
          blurRadius: 10)])));

See demo here: https://dartpad.dev/?id=d3f1fb7d3e50e1543f6899c57c7effb8

These days you can also do (e.g. for the last 3 commits):

git diff @~3

which will show the diff of the last 3 commits below wherever your HEAD currently is (where you're @):)

You could operate over a list of all prime factors less than N to produce an unordered, but complete list of numbers less than N.

1. Generate a list of all prime numbers with up to N. So, you got p₁, p₂, ..., p_n.
2. Make a list of matching exponents for every prime number. So, now you have a data structure representing p₁^e₁, p₂^e₂, ..., p_n^e_n

Now, to the fun part:

1. Initialize all exponents with zero. This gives you the prime factorization of 1.
2. Now, start with the first prime number, and increment its exponent. You got another new number, multiply the prime factors, save it for later.
3. Is the number bigger than N? Trash the number. Set the exponent back to 0. Increment the exponent of the next bigger prime. Is that too big as well? Set the exponent to 0 too, increment the next prime exponent. Repeat until you produce a number < N.
4. Repeat at step 2.

If you cannot increment any exponent in step 3 any more, you have produced every natural number, alongside with their prime factorization.

For example, producing every number <= 6:

1. The prime numbers would be 2,3,5
2. Start with exponents being 0,0,0:
3. 2⁰ * 3⁰ * 5⁰ = 1 -> save it.
4. Increment the exponent of the lowest prime factor:
5. 2¹ * 3⁰ * 5⁰ = 2 -> save it
6. Increment the exponent of the lowest prime factor:
7. 2² * 3⁰ * 5⁰ = 4 -> save it, notice we are missing 3, but we'll get there
8. Increment the exponent of the lowest prime factor:
9. 2³ * 3⁰ * 5⁰ = 8 -> Trash it, 8 > 6
10. Set exponent of the lowest prime factor back to zero, increment the next exponent
11. 2⁰ * 3¹ * 5⁰ = 3 -> save it.
12. Increment the exponent of the lowest prime factor:
13. 2¹ * 3¹ * 5⁰ = 6 -> save it.
14. Increment the exponent of the lowest prime factor:
15. 2² * 3¹ * 5⁰ = 12 -> Trash it, 12 > 6
16. Set exponent of the lowest prime factor back to zero, increment the next exponent
17. 2⁰ * 3² * 5⁰ = 9 -> Trash it, 9 > 6
18. Set exponent of the next to lowest prime factor back to zero, increment the next exponent
19. 2⁰ * 3⁰ * 5¹ = 5 -> Save it.
20. Since your list of results now has 6 elements, you are finished.

reinterpret_cast is the correct cast to use for non-typesafe pointer conversion. Your "plain" or "C-style" cast would do the same implicitly, however, kind of masking the type conversion.

Your specific compiler error, however, is more likely the result of casting constness. For those situations use const_cast (see reference).

You code did work for me and i was able to dump out the cms data with the 'yoohoo' string. One thing i could think of is that the new class is not found: have a look here hope this would help.

There are open-source solutions like react-native-vision-camera that support both iOS and Android.

However, if you're looking for a more reliable solution that supports a wide range of barcodes, performs under challenging conditions (low-light, damaged barcodes), and comes with dedicated developer support, I'd recommend looking into a commercial solution, like Scanbot SDK (disclosure: I'm part of the team).

A colleague of mine actually wrote a tutorial for ReactNative, I'll leave it here in case someone wants to check it out. FYI: yes, we are a commercial solution, but we provide free trial licenses!

Set the default step to 1 and fix some other things, not sure if this is what you wanted:

Updated demo

Testing with edge cases, where a user’s input might be vague or contradictory, can help you refine the accuracy of your analysis. For example, test responses where users mention only partial information, like saying "I've been feeling tired," but not explicitly mentioning sleep issues.

In Java, you can create custom exceptions by extending the Exception class (for checked exceptions) or Runtime Exception class (for unchecked exceptions). Custom exceptions allow you to define specific error conditions and provide meaningful messages.

go through this video for further clarification: https://youtu.be/nwk9lHtH06o

I am getting an error: TypeError: 'module' object is not callable sp = SimplePreprocessor(32, 32)

To keep it to_tsquery make sure to replace any whitespace in your search with <->

Usually, Standard compiler settings might not put an error. as this specific scenario as it doesn't violate syntax rules and doesn't pose an immediate risk of undefined behavior. and basic function of a compiler is to check syntaxial errors what your question is more based on runtime error

An alternative is to extract the .Data slot from the S4 object with @. The code below will produce the same result as the code provided by Jari Oksanen.

library(phyloseq)
library(vegan)

data("GlobalPatterns")

GlobalPatterns %>% 
otu_table() %>%
`@`(., ".Data") %>% 
t() %>% 
vegan::rarecurve(.,step = 10000)

No, in modern Linux kernels, it is not typically possible to run programs without any non-executable segment protection due to several security mechanisms in place. These protections are designed to prevent arbitrary code execution and mitigate vulnerabilities such as buffer overflows and return-oriented programming (ROP) attacks. For more factosecure

It is not possible to excise an attribute in datomic. You can excise only its values https://docs.datomic.com/operation/excision.html

werfewweifdifjdkfdkfjdkfjdkfjdkfjdkfjdkfjdfkdjfkdjfxcnxc fkkdjllllllhkkkhhhhhhhhhhkkkkkkkkkkkkkkkkkkkkkkkkllllljjjj I understood from the text

Have you find the solution for that ? Ashish

For me it worked after running the below code inside of the lambda function directory and deploying the code anew.

pip3 install --platform manylinux2014_x86_64 --target=./ --implementation cp --python-version 3.12 --only-binary=:all: --upgrade psycopg2-binary 

I am used to run my application without debugging (Ctrl+F5), and there was an error in Program.cs that was the origin of that message. Running with debugging let me find the faulty statement, and the message disapeared.

thankyou thankyou thankyou thankyou thankyou

We have been experiencing similar problems with our app and I agree with Zags's answer, but just want to add one piece of valuable information that I have just found out:

The app's folder is not replaced EVERYTIME you make changes to your configuration, but it seems there are certain triggers inside a configuration change that result in a replaced app folder. So far I've found that a change to an ENVRIONMENT VARIABLE causes the app folder to be freshly built (well, sort of, considering the lack of container_commands), while, e.g. an update to, say, a scaling threshold, doesn't.

1、You can use docker pull a centos7 image 2、install gitlab rpm 3、export docker image

Since I did not find any solution, I have converted my PATCH endpoints to POST and they are working in PROD.

If you're looking for an enterprise-level SDK, perhaps check out Scanbot SDK (full disclosure, I am part of their team). My colleague actually wrote a step-by-step tutorial about integrating barcode scanning in Flutter. I'll link it here!

We offer detailed documentation and support during integration and ready-to-use scanning interfaces and features like multi-scanning or AR overlays. Also, we provide free trial licenses for testing purposes.

found what i was looking for, a ribbon split button

Thanks to @Wayne!

According to the issue Snakefile is run a second time if rule contains run directive #2350 I decided to use "shell" instead of "run" in my main_rule. This prevents snakemake from running the snakefile code twice. My working snakefile now looks like this:

#!/bin/python
print('import packages')

from datetime import datetime
import time

now = datetime.now().strftime("%Y-%m-%d_%H-%M-%S")
tarfile = now + '_stardist.tar'
print(tarfile)

rule all:
    input: {tarfile}

rule main_rule:
    input: 
    output: {tarfile}
    shell: 
        "touch {tarfile}"

By default, Snakemake sees the first rule as its target. Thus, if you just run something like snakemake -n, it tries to solve for rule run_simulations. If you move rule all above rule run_simulations, it should work

Rotate the symbol 45 degree and it will easy to click the small text.

I ended up adding a little util that catches the error and throws the custom message:

export async function expectToResolve(expected: Promise<any>, msg: string) {
  try {
    await expect(expected, "").resolves.toBeUndefined()
  } catch {
    throw new Error(msg)
  }
}

It can be used like this:

await expectToResolve(promise, "custom message");

The same problem I have and not yet solved ... Can you notice more detail about the solution you noted, Shakya ? I want to use the colab trained & downloaded best.pt for the yolov5 detect.py in windows 11.

You can't directly access dynamic properties in TypeScript types. You need to use generics to achieve this.

type GetPropertyType<T, K extends keyof T> = T[K];
type LayerPropType = GetPropertyType<WMSLayerProps, typeof tagName>;

Please run the following command after adding a new route.

php artisan route:cache

Have you found a solution for this? I am exactly at this stage now and i can't find any good solution even installing old versions of scikit-learn!

even this doesn't solve it 'super' object has no attribute '__sklearn_tags__'

Adding indexes to most columns in a database table is generally not a good practice unless there is a specific need.

Try to find if any 'other' services are using the same port for connecting to the hosted server. Stop the 'other' service and the issue might be resolved.

I am facing the same problem, the image is in png of 512*512. It is visible to me when I log in as admin in wordpress but not to any users or to me when I use incognito mode. I have tried to clear cache, also included the link to my website header.php file but still the same issue. Is there a guranteed solution to this problem?

list1 = [1,2,3,4,5]
list2 = [4,5,6,7,8]

uncommon_element = list(set(list1) ^ set(list2))
# Output: [1,2,3,6,7,8]

Got it working at last. I had to specify library path through CFLAGS ... I had previously no experience with commandline building, so this was like exploration of the new world for me.

sudo ./configure CFLAGS="-I/opt/homebrew/include -L/opt/homebrew/lib"

sudo make CFLAGS="-I/opt/homebrew/include -L/opt/homebrew/lib"

For now i've fixed the issue by using pac cli commands in my powershell task. pac auth create pac auth update pac admin set-backup-retention-period –

I encountered a similar issue in Spring 4.2.8. When I created the project, the resources folder was missing. I manually added it inside src/main, and after that, everything worked fine. However, I'm not sure why the file wasn’t being detected initially, even though it was in the classpath. Any ideas on what might have caused this?

clientId in the headers of the api is the name of the business of the seller on snapdeal.

Do Share your linkdein , i am also integrating snapdeal apis.

It's solved. I uninstall for the 3rd time IISExpress 10.0 with all the directories it created before and I reinstallit from the visual studio installer and it worked.

"Tcpkg uninstall all" can be used in command prompt if you run as admin. This removes everything. You have to (re)install the twinCAT package manager as that installs the commandline tool.

I forgot to update this, but the request was actually correct, the problem was elsewhere. So if anyone has the same issue the request shown is OK.

I am trying to verify a JWT token using a JWKS URL from Ping Identity in Python. Below is the implementation:

    import jwt
    import requests
    from jwt.algorithms import RSAAlgorithm

    # JWKS URL (Replace with Ping Identity's URL)
    JWKS_URL = "https://your-ping-identity-domain/.well-known/jwks.json"

    # JWT Token to Verify
    token = "your_jwt_token_here"

    # Fetch JWKS
    response = requests.get(JWKS_URL)
    jwks = response.json()

    # Extract Key
    def get_public_key(kid):
        for key in jwks["keys"]:
            if key["kid"] == kid:
                return RSAAlgorithm.from_jwk(key)
        raise ValueError("Public key not found")

    # Decode JWT Header
    header = jwt.get_unverified_header(token)
    kid = header["kid"]

    # Get Matching Public Key
    public_key = get_public_key(kid)

    # Verify JWT
    try:
        decoded_token = jwt.decode(token, public_key, algorithms=["RS256"], audience="your_audience", issuer="your_issuer")
        print("JWT is valid:", decoded_token)
    except jwt.ExpiredSignatureError:
        print("JWT has expired")
    except jwt.InvalidTokenError:
        print("Invalid JWT")

Using spread operator, when copy applied and later main entity is modified then impact on copied entity.

Observation :

• 1st level properties (food, rank) of b remain unchanged.
• Inner properties (contents.flour, contents.grade) of b updated.

spread operator copy behaviour on update

I am not sure is it still an actual problem for you

But it's OK that drone is disarming after a few seconds without a command. That is an Ardupilot default setting.

The code is absolutely fine. I suspect the issue is due to incompatibility between the Spark version you are using and the Python version you have. Please downgrade to PYTHON3.12 and see if that helps.

To extract a YAML file from OpenShift (such as a ConfigMap or DeploymentConfig) while removing unnecessary metadata fields like resourceVersion and uid, use the following command:

oc get cm -o yaml | yq 'del(.metadata.uid, .metadata.resourceVersion)' - > output.yaml

This ensures a clean backup without dynamic metadata fields that may change across deployments.

I removed element with tag bindingredirect in web.config and it resolved the issue. Please refer the following post https://learn.microsoft.com/en-us/answers/questions/902363/cannot-load-file-or-assembly-system-runtime

As in the Comment already stated:

because everytime you call DateTime.Now it gets the current state. Now you call it 2 times leading to a sliightly different timestamp. This means the second DateTime.Now).Days has something like 0.000000001 later calltime resulting in your equasion somewhere like 23:59:59.99999 thus resulting not in a full 24h equals... 0 days

The command

npx expo install some-package

finds compatible version of some-package with your expo version. Under the hood it runs:

npm install some-package@version

Therefore just use

npm uninstall some-package

"I'm experiencing the same issue on Ubuntu while using Angular 17. Previously, I had developed an application that worked fine on Ubuntu 20.04, so I set up my new project on top of that older one. However, I’m still facing the same problem.

I'm not sure if this is due to a package incompatibility, but I’ve tried multiple versions of tauri/api dependencies without success.

Yes. You can do it by using function to open popup with the same popup name

Let existingWindowRef = window.open("", "test");

But remember that it will work after you click „allow popup” in browser’s button

hello guys

The above applying methods is not working thanks

-RequestError: connect EHOSTUNREACH ip:4873.

How to resolve it , can someone help me on this?

I'm stuck at exact same location. Did you find a solution?

In my case, when I reviewed the .gitlab-ci.yml, i found that there was a typo in image i was pushing to registry after build. That caused mismatch and image got pushed to registry with the wrong tag. So, always double-check are you pushing what you built? e.g. after correction,

docker build -t $IMAGE_NAME:$VERSION .

followed by

docker push $IMAGE_NAME:$VERSION

You can cast it directly to timestamp_ntz.

Sample:

select parse_json('{"summary": {"disconnectTimestamp":"2024-03-21T20:19:57.398Z"}}'::string) as test_json,
test_json:summary.disconnectTimestamp::timestamp_ntz as final_timestamp

Result

2024-03-21 20:19:57.398

I have encountered the same problem when calling the deepseek api using python, and it has been like this for several days

did you manage to solve your problem? i have same issue with you, also using bitnami 7.3.15 lampstack with ubuntu 16.04

You need add com.google.android.gms:play-services-auth:21.3.0 to gradle to use SignInClient

faces_encodings.setdefault(location, {}).setdefault(name, encoding)

If you'd like to earn more revenue from your app, you can consider using PacketSDK: https://www.packetsdk.com/?utm-source=xfKuesFT.

This issue could be caused by several factors:

Check Configuration: Ensure that postgresql.conf and pg_hba.conf are correctly configured with wal_level, max_wal_senders, hot_standby, etc. Check Pgpool-II Configuration: Make sure pgpool.conf is properly configured for both primary and standby nodes, and pcp.conf has the correct user and password. Check Replication Slot: Verify if the replication slot is active. If not, try recreating the slot: sql

SELECT pg_drop_replication_slot('your_slot_name'); SELECT pg_create_physical_replication_slot('your_slot_name'); Check Logs: Review PostgreSQL and Pgpool-II logs for any replication-related errors. If the problem persists, check if the walsender process is running correctly.

I hope the above suggestions help. If you'd like to earn more revenue from your app, you can consider using PacketSDK: https://www.packetsdk.com/?utm-source=xfKuesFT.

You might have facing this issue if you were logged into a different Catalyst application previously and then tried to access another one, while the login cookie from the earlier project persisted in your localhost. To resolve this, kindly testing your application in catalyst serve within an incognito window. This will prevent any cookie conflicts from previous sessions.

This issue is often caused by an XML file having unexpected characters before the actual content. The error message "Content is not allowed in prolog" typically means there's an invalid character (like a BOM or non-printable character) before the XML declaration (<?xml ...>).

To fix this:

Open the package.xml file in a text editor. Check if there are any unexpected characters or spaces before the <?xml ...> declaration. If there are, remove them. Save the file and try running the code again. If you're not able to locate the issue or the file seems fine, you might want to try regenerating or re-downloading the Flutter project to ensure everything is set up correctly.

Click the three vertical dots beside the "run" button, "run configuration", and for "Additional run args:", add the following:

--no-enable-impeller

This fixed it for me, so hopefully it does for you as well.

Got same problem here, when I request through curl, I got the same problem with no (valid) return.

I assume this is due to the high volume of attacking towards DeepSeek these days. You can check the api status here, though it says that today (Feb 6, 2025) everything is fine.

We found a rather unusual solution. Although no error or warning was logged in Application Insights, a restore of our main database did the trick and solved our issue.

It could be a coincidence or not, but restarting any of the used services didn't solve the issue. Only a full restore of the db solved our problem. We never had such a problem in the past, usually if something is wrong with the db we see it in the logs or some specific requests fail, but never the whole app without any trace.

Because aosp buiding is so slowly, we should go to lunch after starting building.

@Boyan:- Your solution worked for me.Thanks.

If your theme is hosted on WordPress.org, the updates will come automatically.

If your theme is not hosted on WordPress.org, then you need a custom updater like :

1. GitHub Updater (3rd-party plugin),

2. Custom API for Updates (using wp_get_http and site_transient_update_themes)

To @TheWizEd,

I confused with these questions.

• What is the file extension of JS_Test file? Is it placed in project in AppScript?

• Which app is used? -- Web app with server-side or browser-client side. (Thanks to @TheMaster's comment in this article -- Why function in tag does NOT invoke function defined in .gs file in AppScript (Web App)?

)

private void menuStrip1_ItemAdded(object sender, ToolStripItemEventArgs e){
   string s = e.Item.GetType().ToString();
   if (s == "System.Windows.Forms.MdiControlStrip+SystemMenuItem")
   {
         menuStrip1.Items.RemoveAt(e.Item.MergeIndex);
   }
}

Code that removes the child form icon from the top left

If you're using imgur and google site then directly share the image paths.

Those paths you can include in html with img.

you want to give the length of varchar(50)
website VARACHAR(60), aboutyou VARCHAR(50) gender VARCHAR(50)

I added:

ORDER BY op.product_id DESC LIMIT 1

Full function Fix:

public function getSellerOrderProducts($order_id, $seller_id1){
$query = $this->db->query("SELECT pvo.product_id,(SELECT op.name FROM " . DB_PREFIX . "order_product op where op.product_id = pvo.product_id AND op.order_id = pvo.order_id ORDER BY op.product_id DESC LIMIT 1) as product_name FROM " . DB_PREFIX . "purpletree_vendor_orders pvo WHERE pvo.seller_id='".(int)$seller_id1."' AND pvo.order_id = '".(int)$order_id."'");

    return $query->rows;
}

In the Stack Overflow discussion, the user is seeking help to add comments to both the User and Post models in Ruby on Rails. The solution proposed suggests that, instead of directly associating comments with the User model, they should be linked to the Post model via a post_id. In the create action in the CommentsController, the user_id should be set manually (e.g., @comment.user_id = current_user.id), rather than including user_id in the strong parameters.

By using nested resources and ensuring the correct associations, the comments system should function correctly, with each comment linked to both the appropriate post and user.

In addition, PenetoLabs could support developers by optimizing decision-making during the app development process, helping streamline workflows and improve overall situational awareness within the team when handling complex integrations or debugging issues.

The following screenshot will be more explanatory.

PP1 and PP2 are used to view printer profiles. The agency needs to provide the LNIATA from the profile they are using. Please request this information from the agency.

In the example below, it is found under PP2, but it is usually under PP1.

You can also retrieve this information by using the SabreCommandLLSRQ service and sending these commands. (Make sure to include the asterisk symbol '∗')

Below statement will first generate drop statement then exec statement will drop those tables from said schema.

DECLARE @droptable NVARCHAR(MAX) SELECT @droptable = COALESCE(@droptable, N'') + 'DROP TABLE [DBA].' + QUOTENAME(TABLE_NAME) + N';' + CHAR(13) FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = 'DBA' and TABLE_TYPE = 'BASE TABLE'

EXEC sp_executesql @droptable

Pass no-pin in --mode option.

Example:

pipreqs --force --mode no-pin

You need to Download Microsoft Visual Studio Installer Project Extension after that you will be able to create setup project which will create msi and exe file for your application installation

1. List item m cvl

c,m vk bckb cvb'mcb c b cb kmb mlbm c bcb cvbkmcb fcb cb mcvlb mc bf fbm fdbmfdbmcbdbdb dbnd bdnmbd b b d vd vd vbdm bmdb fvdvd bdb o bvkdbd bdbd dbkdfmkb d bd db

Google Play Developer API allows developers to access app data, but it doesn’t provide access to the URL of a Play Store page directly. It’s primarily useful for managing apps, in-app purchases, and subscriptions. However, it’s not a solution for extracting Play Store URLs in real-time during user browsing

if needed, use a WebView to track the URL when users visit the Play Store page in a browser.

Are you running this project through xampp? If not, is it through docker or any containers?

If you are running the laravel project through docker container, the port is usually going to be different from host machine and the containers.

However, if you are indeed running through xampp and using laravel's , then you might need to run 2 artisan server command.

Example)

1st terminal: Run php artisan serve --port=8070

2nd terminal: Run php artisan serve --port=8071

And then in your code, change the following:

$response = Http::post('http://localhost:8071/oauth/token', [
    'grant_type' => 'password',
    'client_id' => env('PASSPORT_PASSWORD_CLIENT_ID'),
    'client_secret' => env('PASSPORT_PASSWORD_SECRET'),
    'username' => $userData['email'],
    'password' => $userData['password'],
    'scope' => '',
]);

You should see something like this in your terminal output.

Example response:

{
   "success":true,
   "statusCode":201,
   "message":"User has been registered successfully.",
   "data":{
      "name":"Test",
      "email":"[email protected]",
      "updated_at":"2025-02-06T06:29:53.000000Z",
      "created_at":"2025-02-06T06:29:53.000000Z",
      "id":4,
      "token":{
         "token_type":"Bearer",
         "expires_in":1296000,
         "access_token":"some token",
         "refresh_token":"some refresh token"
      }
   }
}

Hope this answers your question.

Thanks.

By removing the header: 'Content-Type': 'multipart/form-data',\ it finally works!

try replacing const with let. I think they'll fix it soon.

Too simple to be true. But it is.

    def test_my_signal(self):
        spy = QSignalSpy(self.view.my_signal)
        self.assertTrue(spy.isValid())

I'm also facing the same issue. Were you able to solve it?

npm run swizzle @docusaurus/theme-classic Icon/Language --danger

I have created simple React App deployed to Azure Web App using Vs code, even I'm facing the same issue.

Firstly, Check the Kudu Console If the necessary files are deployed or not by using below URL.

https://<AzureWebName>.scm.canadacentral-01.azurewebsites.net/newui

If the files are not deployed correctly then redeploy it again.

Make sure to run the below command before deploying to Azure using VS Code.

npm run build

Follow the below steps to deploy the app to Azure.

I added below Startup Command in the configuration section of Azure Web App.

pm2 serve /home/site/wwwroot/build --no-daemon --spa

Azure Output:

There may be following issues :

1- There may be plugin conflict. To check this disable all the plugins and check if it works. If it works then enable the plugins one by one again and get the plugin which is making the issue.

2- Check if there is any issue in the active theme. To check this switch to the default theme. Check if the issue is gone. If the issue is gone then check for the issue in the old active theme.

3- Check for the Roles and Permissions.

4- Clear the cache.

I face same issue ,is this still not possible for instagram? while it work for facebook

I have created one spinner on Ribbon bar through Ribbon resource toolbox in MFC SDI C++ application and I am using visual studio 2015

I got Ribbon access with the help of below code

enter code here
// Get the Ribbon bar and find the Spinner button by command ID
CMFCRibbonBar* pRibbonBar = GetRibbonBar();

if (pRibbonBar != nullptr)
 {
  // Access the spinner controls
  CMFCRibbonEdit* pSpin = 
  (CMFCRibbonEdit*)m_wndRibbonBar.FindByID(ID_SPIN);
  if (pSpin)
  {
   pSpin->EnableSpinButtons(0.00f, 50.00f);  // Set range 0 to 50
   pSpin->SetEditText(_T("1.00"));
  }
 }

now what happening spinner by default taking step increment/decrement with 1 but I need step increment with floating value 0.10 instead of 1, which is happening the same in MS word for Layout tab-> Paragraph->Indent spinner, the same increment/decrement we also need

I tried too much but not got any ideas for ribbon spinner customize step control with floating value 0.10, if you no anyone then pls share the code.

In my case, The issue was caused by an incorrect system time. After updating it to the correct time, the problem was resolved.

Same issue here. Have to use rails routes. Not awful, but unexpected.

> rake routes
rake aborted!
Don't know how to build task 'routes' (See the list of available tasks with `rake --tasks`)

(See full trace by running task with --trace)

> rake --version
rake, version 13.2.1

> rails --version
Rails 8.0.1

> ruby --version
ruby 3.4.1 (2024-12-25 revision 48d4efcb85) +PRISM [x86_64-linux]

> rails routes
                                  Prefix Verb   URI Pattern                                                                                       Controller#Action
                                                /assets                                                                                           Propshaft::Server
                      rails_health_check GET    /up(.:format)                                                                                     rails/health#show
                                    root GET    /                                                                                                 welcome#index

[...etc]

You can deploy your application to a client’s device or server without exposing your codebase, you can consider this approach.

JavaScript Obfuscator is a powerful free obfuscator for JavaScript, containing a variety of features which provide protection for your source code.

I got this error because company proxy did not allow some downloads.

Could you please let me know if you have a solution for the above discussed issue, I aslo need to track the time of the user stayed on the page