Did u check firewall issue? But if it persist mt5 error 401(permission issue) then they likely blocked it. 10 requests per minute according documentation. No explanation and lots of frustration when ur fixing and testing. I guess metatrader assume error 401 = "blocked for sending too many request"? Barbaric but interesting. Anyway just speculating till somone find out. Use delay timer in code or reinstall mt5.
My files were all closed and I even rebooted my computer but I still couldn't modify the date of a file, only have a folder. Can you think of anything special you might have done and forgotten about? I moved on to a different method that involved using the Shell API. Still figuring that out but I'd much rather use modifydate as it's much simpler
In my IAR version its Ctrl+Alt+F for expand or collapse all. you could find its short key in Tools->options->Key Bindings, then select Edit it Menu in top, and find "collapse/Expand All folds" in below of it, you could also set this short key here.
Real-time screen mirroring from iOS to Google TV (Chromecast with Google TV) is challenging due to latency and protocol limitations. Please note:
Google Cast SDK: Does not support real-time screen mirroring, only media casting.
WebRTC Support: Google TV does not natively support WebRTC, so direct low-latency streaming is not feasible.
ReplayKit + Streaming: Capturing the screen using RPScreenRecorder and streaming via HLS introduces significant latency.
RTSP/UDP Streaming: Google TV does not natively support RTSP, making direct streaming difficult.
Alternative Approach:
Use a custom receiver app on Google TV to handle a low-latency video stream.
Stream the captured screen using WebRTC (if a receiver is implemented on Google TV) or low-latency DASH.
Consider third-party solutions like AirPlay-compatible apps on Google TV.
Since native support is limited, a custom streaming solution with a WebRTC receiver or a low-latency protocol may be required.
Try Result<()> over ProgramResult cause,
ProgramResult is the type alias that has been used in older anchor projects, in the newer upgraded version of Anchor it support Result<()> for error handling and Result conventions will remove unnecessary library imports from your project too.
void printBinary(int n, int bits) {
for (int i = bits - 1; i >= 0; i--) {
int bit = (n >> i) & 1;
printf("%d", bit);
// Add a space after every 4 bits, except after the last group
if (i % 4 == 0 && i != 0) {
printf(" ");
}
}
printf("\n");
}
In my story, this was caused by I accidentally chose a wrong testing device that does not match the target device family (I was working for iPhone/iPad but accidentally choose Mac when running the app) .
That's normal behavior from the Android OS itself. The app can't run continuously for an extended period of time due to system restrictions, battery optimization, or background process limits imposed by Android to improve performance and battery life.
I'm currently working on a similar requirement to bulk read more than 3 lakh (300,000) records from the Catalyst Datastore and generate a CSV file. However, it appears that a single bulk read request can retrieve only 2 lakh (200,000) records at a time.
To overcome this limitation, a workaround is to execute multiple bulk read requests iteratively, where each request fetches 2 lakh records. By combining the results from multiple requests, we can successfully retrieve all the required records and generate the complete CSV file.
To fetch the next set of records, you need to pass the page key in the bulk read API request. For example, setting page: 1 will retrieve the first 2 lakh records, while page: 2 will fetch the next set, and so on.
You can refer their official help documentation here
In my case I had to remove formControlName="" attribute from the <input> tag and use the (change)="onFileSelect($event)" event to programmatically set file to the form control using [formGroup]=""
For me, the 403 error was caused by using the identity/ app-registration account name for the CodeSigningAccountName in the .json file. It should be the name of the trusted signing account service.
#include <stdio.h>
int main(void)
{
int i = 15;
printf("(int) i++: %d, i: %d\n", i++, i);
float j = 15.0;
printf("(float) j++: %g, j: %g\n", j++, j);
double k = 15;
printf("(double) k++: %g, k: %g\n", k++, k);
return 0;
}
--------------------------
Output:
(int) i++: 15, i: 16
(float) j++: 15, j: 15
(double) k++: 15, k: 16
--------------------------
Note the difference between the usage
of %f and %g
As a good practice, use increment/decrement
operator on int type data
As per my understanding it isn't as good programming style to use increment/decrement operator on values of float data type, given the nature of the operator that clearly increases or decreases the value by 1 based on the operator used.
You can format the sql script using VS Code. Right-Click > Format Document With... > PostgreSQL or directly Right-Click > Format Document once VS Code detected it as sql script
VS Code SQL Formatting
While JSON can work for small projects, it's not ideal for performance, concurrency, or scalability. If you need a robust solution, a proper database is the way to go. For an easy way to manage a database, check out this php crud. 🚀
AFAIK this is not straightforward. You would have to create a new volume of 80GB, copy all the data from the old volume to the new one, and boot a new instance using the new volume.
It depends what kind of algorythms will you use, not of the engine.
UnrealEngine have the best tools ready to go for large scenes, but it isn't for 1GB ram.
ThreadX doesn't use LwIP as its Ethernet stack. Instead is uses NetXDuo. In order to use Ethernet within ThreadX (assuming you want to do it through CubeMX) is to enable NetXDuo and set up the tasks associated with it. It's a little different than LwIP in application since it's based around threads, but functionally the same thing.
I just got this issue, my global.css was not working properly, many styles were not working after I moved the css into the [locale] folder, but after I took it out and kept it in the app folder, my Global css started working properly again.
The Oracle Suite Answer provides a solution that enables images to be displayed on the Sales Order and Invoice PDF templates. This solution may be custom. When using the standard method, there are instances where the image, item, or other sourced elements are duplicated or repeated on the Advanced HTML/PDF template in NetSuite.
ScriptableObjects are references, so if you do something with them in code using editor, it will apply permamently (so after you stop the game, the changes will stay).
You can copy the data to normal object or instantiate a clone of your ScriptableObjects.
By the way - if you build the game it will work properly (ScriptableObjects will be ok after restarting the game).
Make sure that you use the rectangle tool to resize your sprite and not the scaling tool. I had this issue as well and solved it thanks to following Charger Games' tutorial. So the Scale value should be 1 but your Size value under Draw Mode should change. Hope this helps! :D
First you delete the FETCH_HEAD file in the .git folder, then run command git fetch, the FETCH_HEAD file will be recreated. Lastly, try git pull, it would most likely work again.
Run git clone https://[email protected]/user/repo.git and replace token with your token you just created, user with your github username, and repo with your repo name.
The latest asdf version 0.16.1 no longer needs to add . $(brew --prefix)/opt/asdf/libexec/asdf.sh to your zshrc file. Just remove this line and reinstall asdf.
The high probability that this error occurs is because the sellerId is incorrect.
Please note that sellerId is not marketplaceId.
The value of MerchantIdentifier in the following feed must be a Seller ID. Your Seller ID is located in Seller Central under Settings > Account Info > Your Merchant Token.
Encountered same issue with QR code after installing expo-dev-client. No need to remove expo-dev-client to go back, just press s to get the QR code working as before.
It looks like numpy is installed, but LibreOffice might not be using the same Python environment.
If you check the version and match the environment, you can fix it.
I found the right names to use for Prompt shields for jailbreak attacks, Prompt shields for indirect attacks, Protected material for text, and Protected material for code categories
The names to be used are:
Jailbreak
Indirect Attack
Protected Material Text
Protected Material Code
However, please note that there is still an issue regarding severity_threshold being required value.
First, alloca() is a much simpler mechanism that usually does not require storing the size of the allocated memory. Eg:
int main() {
const int N = 1000*1000;
const int M = 1009;
int s = 0;
for (int i = 0; i < N; i++) {
int l = 1 + rand()%M;
int *a = alloca(sizeof(int)*l);
for (int j = 0; j < l; j++) {
a[j] = rand();
}
for (int j = 0; j < l; j++) {
s += a[j];
}
}
return s == 0;
}
For large values of N, this code leads to a stack overflow. But with small values of N, all allocated memory is freed when exiting the main() function by freeing the frame on the stack. It is easy to see that when using the alloca() function in this way, the -fomit-frame-pointer key is ignored.
In the implementations of VLAs that store the array on the stack, do they store the size of the array somewhere at runtime? If yes, where? If not, how do you know at runtime how much to decrement the stack pointer once the array goes out of scope?
VLA is a much more complex and precise mechanism, for example:
int main() {
const int N = 1000*1000;
const int M = 1009;
int s = 0;
for (int i = 0; i < N; i++) {
int a[1+ rand()%M];
for (size_t j = 0; j < sizeof(a)/sizeof(a[0]); j++) {
a[j] = rand();
}
for (size_t j = 0; j < sizeof(a)/sizeof(a[0]); j++) {
s += a[j];
}
}
return s == 0;
}
At each iteration of the loop, memory on the stack is allocated and released. In this case, the size of this memory is not saved, the stack returns to the frame. But in more complex cases and/or when using other compilers, who knows? Depends on the implementation.
However, at least the debugging information contains information about VLA arrays.
To make sure your images show up when someone else opens your .html file, you have a couple of options. You can upload your images to a hosting site like Imgur, PostImages, or Google Drive, and then use the link to those images in your HTML file. Another option is to send the HTML file along with the images in a zip folder. Just make sure both the images and HTML file are in the same folder, and when they unzip it, everything should load properly. If you want your webpage to be online, you can host it on platforms like GitHub Pages, Netlify, or Google Sites so anyone can access it without problems.
I couldn't reproduce the issue, but I see two different potential issues
First there is two comboSearchResults in provided code, perhaps you are mix-using them.
Second a lot of provider returns List<dynamic>, which doesn't have a proper == and hashCode defined, this can cause missed update in some cases.
I was reading your column. I'm adding rows of numbers between addition and subtraction. To make it easy to understand, doing it a long way I get 3156 but if I add/subtract one after anothe 3169......I'm always off by 13. Help Bob
var input1,input2;
input1= document.getElementById("input1");
input2 = document.getElementById("input2");
input1.onkeyup = function () { input2.value = input1.value; };
//now if you want to copy edits from input2 to input1
// input2.onkeyup = function () { input1.value = input1.value; };
.onkeyup listens for things after you release the key from your keyboard, automatically firing a script after a change is made
Short answer, when you say "0%", "100%", etc. in a clip-path, what is this relative to? The size of the element? The size of its parent? The MDN examples use circle() which is shorthand for circle(50%).
basically Promise.allSettled is a function that kind of explains itself, it basically takes a list, or multiple arguments, and looks though each of these promises and checks if the promises are “settled”, basically yes(true), no(false), so the reason why it ignores this false is that false is a expected state, in this example the allSettled never passes, due to the key word await being included before it so its always waiting for the argument to be true all around , i’ve used it before in my code, i can assure you that its perfectly safe to use
Esbuild should now support all the 3 types of decorators: Feature request: Decorators support #104: JS Decorators, TS experimental decorators and metadata decorators.
I was using context(viewModelScope) with context-receiver, and it doesn't work with Koin. Either it doesn't work for the moment, either there is a special setup i didn't found !
Figured it out - I added this snippet at the bottom before "hyperlinks generated". Thanks @Tim Williams
For Each dcell In drg.Cells
dFormat = dcell.Worksheet.Evaluate("=CELL(""format""," & dcell.Address & ")")
IsFormatValid = False
If dFormat = "F6" Then
dcell.Font.Color = RGB(255, 255, 255)
End If
Next dcell
When the data at char 6 is not 5-9, the check digit must be recalculated. It won't just be the data at char 7.
digits sABCDEFc
multipy by 31313131
s3 plus A1 + B3 + C1 + D3 + E1 + F3 + c1 will be a multiple of 10
So in the case of 5-9:
sABCDEFc becomes sABCDE0000Fc and the check digit is the same. All other cases the c (check digit) has to be recalculated.
interface IExample {
get name(): string;
}
class Example implements IExample {
private _name: string = "Bob";
public get name() {
return this._name;
}
public set name(value) {
this._name = value;
}
}
it seems that xcode 16.2 this solution "Adding both the file path you are editing and an entry for $DERIVED_FILE_DIR into your output files for the matching file path will fix this issue" no longer works, I've temporarily reverted to setting "User Script Sandboxing" to "No". In build settings.
I believe the issue is a simple as passing a non-numeric value to the mcw variable:
mcw = list(PO3_Ex = levels(us_data$PO3_Ex)))
Check to see what the output of list(PO3_Ex = levels(us_data$PO3_Ex))) is and make sure its the data type process expects which I believe is a numeric data type since its trying to use the trunc() function against it.
Although it doesn't offer much customizability, most browsers will render an alternative, darker version of the audio element if you specify the following:
Although it doesn't offer much customizability, most browsers will render an alternative, darker version of the audio element if you specify the following:
I am uing class aproach. Please, refer some tutorial how to register ajax handler on class.
When ajax request is sent I am facing with admin-ajax.php 400 http error. @Deepak Rajpal said to move handler into main plugin file. I am wondering how to achive a goal with class aproach.
It is imperative to set the namespace correctly in the designer and code file. The namespace must match a namespace pertinent to the project that receives the files you try to add
Content scripts do not run in about: pages by default, even with <all_urls> specified. To make content scripts run in about:blank, you must specify it explicitly with match_about_blank.
I am looking for cognito backup solution. It would be helpful if you could help me with the migration lambda. Currently i have two lambda one to export tye users and groups and store it in s3 and another lambda to import users. I am currently facing issue while importing with below error.
Users have different number of values than the headers .
It would be helpful if you could guide me. Thanks.
