This introduction (http://laurie.tech/start-fpga/)worked. Thank you very much, Vlad!

You can create a Spark dataframe from a Pandas dataframe:

  pandas_df = pd.DataFrame(inferenced_df)
  inferenced_df = spark.createDataFrame(pandas_df,schema)

You should use && instead of ||.

int main (void) {
    int test = 0;

    printf("enter number\n");
    scanf("%d", &test);

    if (test != 0 && test != 1)
    {
            printf("Not 0 nor 1\n");
    }
    else
    {
            printf("0 or 1\n");
    }

    return 0;}

Ah, actually, this fixed it. Not sure what happened

git rm -r --cached .
git add --all .
git commit -a -m "Versioning untracked files"
git push origin master

iPad does support mouses but normal mouse movements may get accelerated so the positioning could be inaccurate. But you can use "Absolute Positioning Mouse" to know the exact position of the mouse. In absolute mode, HID device sends absolute coordinates to the host instead of x/y delta, then the host sets the mouse pointer to the position without acceleration. So your HID device always knows exactly where the mouse pointer is.

To use absolute positioning mouse, you need to define a new HID report descriptor, from here you can find an example. This project creats a USB HID devices instead of Bluetooth ones but the report descriptor should be same (or similar?).

BTW seems iPhone doesn't support absolute positioning mouse, even it shares most parts of OS with iPad.

The issue likely isn't directly related to onBackPressed. It's in your adapter and the data provided to it. Please post the code for your RecyclerView adapter.

Also, if you're using a ViewModel with LiveData or Rx streams providing the data to the list, that would also be helpful.

SMS Gateway Emulator. It is an Android app that emulates many SMS gateways API on your phone. You can use SMS gateway API and SDK to send SMS messages from your phone instead of the gateway.

turn off centered layout in appearance it will be fixeda

Enabling pyarrow in spark config resolved this problem. Below is the setting used. pyarrow seamlessly converts pandas dataframe types to spark dataframe types.

"spark.sql.execution.arrow.pyspark.enabled": "true"

The solutions above didn't work for me. But if you try with a virtual env it should go away.

python3 -m venv venv
source venv/bin/activate
pip install numpy matplotlib

then run the script from within the venv.

Are you sure it will not work for write just "subject"?

I have the same problem, and I found use raw string worked.

Or maybe use like this also worked

CriteriaBuilder cb = em.getCriteriaBuilder();
CriteriaQuery<Exam> cq = cb.createQuery(Exam.class);
Root<Exam> root = cq.from(Exam.class);

cq.where(cb.isMember(subject, (ListAttribute)root.get(Exam_.subjects)));

return em.createQuery(cq);

Como eu faço pra enviar com imagens ou documentos?

[HttpPost("enviar")]
public async Task<IActionResult> EnviarMensagem([FromBody] Mensagem mensagem)
{
    // Envia a mensagem para o servidor Node.js
    var httpClient = new HttpClient();
    var response = await httpClient.PostAsJsonAsync("http://localhost:3000/enviar", mensagem);

    response.EnsureSuccessStatusCode();

    return Ok(new { status = "Mensagem enviada pelo WhatsApp." });
}
    app.post('/enviar', async (req, res) => {
    const { numero, texto } = req.body;
    try {
        const chatId = `${numero}@c.us`;
        await client.sendMessage(chatId, texto);
        res.send({ status: 'Mensagem enviada!' });
    } catch (error) {
        console.error(error);
        res.status(500).send({ error: 'Erro ao enviar mensagem.' });
    }
});

Como eu adiciono ?

create a new empty project and generate a cs project empty file from vs2022 and the copy your assets and projects settings only remove any vs generated files from previous damaged projects and it will be fine. that happen to me and it's fixed.

If you are on VSCode (and your issue is not 'lowercase component name' or other issues described in the post), the issue might be that VSCode might be using different TS version than the one your project is on.

Following this fixed my issue:

1. Open VS Code Command Palette (Ctrl + Shift + P on windows)
2. Search for "TypeScript: Select the typescript version"
3. Change it to your project's version:
   Image for Reference

Credits: https://github.com/vitejs/vite/issues/14011#issuecomment-1732576454

You will need to examine the source code of the annotation processor for @Retry. You will find that there are functions under there, and that the result of the @Retry is to wrap the written function in a call to the implementation -- which takes the parameters as ordinary parameters, just as you would like.

According to Python Developer Reference for Azure Functions:

It isn't guaranteed that the state of your app will be preserved for future executions. However, the Azure Functions runtime often reuses the same process for multiple executions of the same app. To cache the results of an expensive computation, declare it as a global variable.

Therefore, global variables values may be reused for multiple Azure Function's executions, what explains the behavior described.

I spent half an hour searching for a solution to this. You can't! In Chrome, all you can do is use @gemini <question>.

As of today, there is no other way :(

I solved this by putting the filter result to the same sheet and then making a copy from this sheet to the new file.

When your debug type is "debugpy" in the config, the debugging can be detected in sys.modules.

launch.json

{
    "configurations": [
        {
            "name": "Python Debugger: Module",
            "type": "debugpy",
            "request": "launch",
            "module": "app.main"
        }
    ]
}

app/main.py

def check_is_debug_attached():
    for module in sys.modules.values():
        if module.__name__ == 'debugpy':
            print('Debugger is attached')
            return True

    print('Debugger is not attached')
    return False

if __name__ == '__main__':
    is_debug_attached = check_is_debug_attached()
    print(f'is_debug_attached: {is_debug_attached}')

wx.StaticText does not change the label string, but a monospaced font should be used for the lines of the paragraph to maintain vertical alignment. like so:

font = wx.Font(pointSize=15, family=wx.FONTFAMILY_MODERN,\
               style=wx.FONTSTYLE_NORMAL, weight=wx.FONTWEIGHT_NORMAL,\
               faceName="Courier New")
staticText = wx.StaticText(parentPanel, label=text, style=wx.ALIGN_LEFT)
staticText.SetFont(font)

The short answer is that I had to do a lot of exclude group: (with help from ChatGPT) to avoid collisions when moving to groovy4;

https://github.com/quiltdata/nf-quilt/blob/main/plugins/nf-quilt/build.gradle

There were also some weird version issues in my codebase. Here's the definitions that finally worked:

groovyVersion = 4.0.24
groovyV = groovy-4.0
groovySource = apache
jdkVersion = 11
javaLangVersion = 21

Thank you for the PHP_EOL. I had problems on php 8.1.31 (or php 8.1 in general) where the previously working php's mail program (php 5.6, I believe) was causing unusual changes and the attachments were also not going through.

I had to change from '\n\n' to '\r\n' and then things started working smoothly. This change happened to go across many mail headers and most importantly the multipart-boundary and the multipart mixed

Wanted to publish this for future help to others

Another scenario that can result in this issue is usage of a custom node autoscaler that creates a malformed node. For example, if you're on a old version of CastAI pod pinner, there's a bug that can result in this issue. You can fix it by disabling or upgrading pod pinner.

Thanks a lot a great help to me

Did you find the answer? if so, please comment!

Ubunt users can use:

sudo add-apt-repository ppa:deadsnakes
sudo apt-get update
sudo apt-get install python3.13-nogil

The docker password referenced in deploy.yml has to be stored as an environmental variable in the local machine.

According to the docs, VS v17.1 does not support .net 8.

To target net8.0, you must use version 17.8 or later.

https://learn.microsoft.com/en-us/dotnet/core/compatibility/sdk/8.0/version-requirements

For thouse like me who are not firm with composer, the goal is that composer create a "vendor" subfolder, in this subfolder are all files about the installed script. In my case all controllers and modells about the shield-extension.

The connection from the main-folder and the main-framework scripts in the "app" folder will create on setup command (in my case "php spark shield:setup") here all the things will done (create tables in database, extend the base_controller and modells with the controllers in the vendort-subfolder etc.

For those of us who are newer to scrapy and not looking to do the amount of work/customization involved in defining custom log extensions, it seems this could be achieved with custom stats + periodic log stats.

Under the parse function in each spider class, I set self.crawler.stats.set_value('spider_name', self.name), and then in settings.py set "PERIODIC_LOG_STATS": {"include": "spider_name"]} (and whatever else you want output from periodic log stats). I also defining separate CrawlProcess processes for each spider.

This might be too hacky but has been working for me, and allows me to stay within the scrapy-defined log classes and extensions, while running multiple spiders via API. If anyone sees a reason why this is unacceptable please let me know, as I had mentioned I'm new to scrapy :)

I have exactly the same problem... did you solve it??

Load the uploaded Excel file to inspect and process it

uploaded_file_path = '/mnt/data/Corrected_Influencer_Details.xlsx'

Read the Excel file into a pandas DataFrame

uploaded_df = pd.read_excel(uploaded_file_path)

Display the first few rows of the DataFrame to understand its structure

uploaded_df.head()

(I cannot answer directly because of points) I used blaze_125 script as a base to create this new script that lets you adjunst the timeout for the scrolling and ultimately let you export the result as a markdown file. you can access it HERE

The displayArabic package might help:

https://rdrr.io/github/MCRoche/DisplayArabic/man/displayArabic.html

(I'm in the process of trying to get ggplot to work with Arabic on Windows and I can't read Arabic, so I can't verify how well it works.)

The generic ActionResult is primarily a design-time feature for better clarity and API tooling, not a strict runtime constraint. If you want stricter type checking, you'd need to manually enforce the return type in your method logic. Otherwise, the flexibility allows for polymorphic behavior by design.

Spring boot version: 3.4.1

   <dependency>
        <groupId>org.springdoc</groupId>
        <artifactId>springdoc-openapi-starter-webmvc-ui</artifactId>
        <version>2.7.0</version>
    </dependency>

I just putted this at the final where const lineLengthExtension = 2.2, lineLengthReduction = 2.2;.

pointsToConnect.forEach(({ angle }, pointIndex) => {
        const innerPoint = polarToCartesian(innerOuterRadius - lineLengthReduction, angle);
        const inclinedOuterAngle = angle + (pointIndex === 0 ? inclinationAngle : -inclinationAngle);
        const extendedOuterPoint = polarToCartesian(outerInnerRadius + lineLengthExtension, inclinedOuterAngle);

        svg.append("line")
            .attr("x1", innerPoint.x)
            .attr("y1", innerPoint.y)
            .attr("x2", extendedOuterPoint.x)
            .attr("y2", extendedOuterPoint.y)
            .attr("stroke", lineColor)
            .attr("stroke-width", 3);
    });

Did you restart Apache for the changes in httpd.conf to take effect?

sudo /opt/bitnami/ctlscript.sh restart apache

I think the correct way would be to make another macro to import the styles and scripts for this macro.

Instead reevaluateListenable, try update you AppRouter with:

class AppRouter extends RootStackRouter {
  @override
  List<AutoRoute> get routes => [];
    
  @override
  List<AutoRouteGuard> get guards => [
       getIt<AuthRouteGuard>(),
  ];
}

Короче, если ты читешь эту статью, то ты тоже пытаешься отправлять и читать смс с Huawei E8372... Лучше описания в инете я не нашел, но тут не все полностью описано.. LOGIN_REQ= из первого сообщения не совсем верно - пароль там рассчитывается по особенному, а именно

 psd = base64encode(SHA256(name + base64encode(SHA256($('#password').val())) + g_requestVerificationToken[0]));

Ближе всего к истине

"psd = sha256("admin");
psd = b64(psd);
psd = name + psd + token;
psd = sha256(psd);
psd = b64(psd); "

base64encode это не просто base64строка, а своя функция расчета - стандартные методы не работают Вот кусок кода

//function base64encode(str) {
//    var out, i, len;
//    var c1, c2, c3;
//    len = str.length;
//    i = 0;
//    out = '';
//    while (i < len) {
//        c1 = str.charCodeAt(i++) & 0xff;
//        if (i == len) {
//            out += g_base64EncodeChars.charAt(c1 >> 2);
//            out += g_base64EncodeChars.charAt((c1 & 0x3) << 4);
//            out += '==';
//            break;
//        }
//        c2 = str.charCodeAt(i++);
//        if (i == len) {
//            out += g_base64EncodeChars.charAt(c1 >> 2);
//            out += g_base64EncodeChars.charAt(((c1 & 0x3) << 4) | ((c2 & 0xF0) >> 4));
//            out += g_base64EncodeChars.charAt((c2 & 0xF) << 2);
//            out += '=';
//            break;
//        }
//        c3 = str.charCodeAt(i++);
//        out += g_base64EncodeChars.charAt(c1 >> 2);
//        out += g_base64EncodeChars.charAt(((c1 & 0x3) << 4) | ((c2 & 0xF0) >> 4));
//        out += g_base64EncodeChars.charAt(((c2 & 0xF) << 2) | ((c3 & 0xC0) >> 6));
//        out += g_base64EncodeChars.charAt(c3 & 0x3F);
//    }
//    return out;
//}    

Короче отладке в браузере тебе читающий товарищ в помощь и исследуй sms.js и main.js - там по сути все есть

There are different methods to authenticate to artifact registry. Since you prefer using temporary credentials, you can try using a short-lived OAuth access token for password authentication. However, keyrings.google-artifactregistry-auth relies on ADC or json credentials so the access token should follow a specific json file format.

As for AR authentication during docker build time, it is best practice to generate the access token using gcloud print-access–token before performing docker build.

I came across this StackOverflow post about injecting credentials to docker build. You can follow the suggestions made in the thread and see if those would help.

Old thread, but I found a solution to the access denied error is to use Mount-VHD command rather than the Mount-DiskImage command.

For the benefit of anyone still experiencing this issue and other solutions did not work for. I was able to resolve this issue by removing all whitespaces in the parent directory name. Check through all directory in the path and remove all whitespaces. I hope this helps

This lib might be useful

cargo-version-upgrade is a Rust library designed for managing semantic versioning in Rust projects. It provides an easy-to-use CLI to update versions in your Cargo.toml file based on semantic versioning rules.

The same as when you're using plain text:

Example

1​1⁄2

Constituents

1. 1

2. Zero-Width Space:

   ​
   

   This is necessary to separate the superscript content of the fraction slash from the standard "1" without creating a gap.

3. 1

4. Fraction Slash:

    ⁄
   

   This converts its immediate neighbours to superscript and subscript versions.

5. 4

This is semantic.

By using https://pub.dev/packages/store_checker package it's possible to check if the running app has been downloaded from Google Play Store, Apple App Store, Apple Testflight, Amazon, etc.

It may potentially resolve the issue of determining if the application is running on PROD or QA environments, or in a different environment.

I am facing the same problem in jBPM version 7.74.1.Final, "Can't lookup on specified data set: jbpmProcessInstances" the error started after I configured LDAP.

Is yours showing the same error? And if possible, can you send me the kie-server-client-7.71.0.Final.jar library that you changed?

TypeChecker#getAliasedSymbol says that baz in "foo.ts" points to bar in "baz.ts", skipping "bar.ts" entirely.

Does getImmediateAliasedSymbol work for you?

use AuthorizeView Tags with the Role definition:

<AuthorizeView Roles="Admin">
<p>Welcome, Admin! You have special permissions.</p>

<AuthorizeView Roles="User">
<p>Welcome, User! Here is your dashboard.</p>

It seems like this feature has become undocumented, but does still automatically exist. I was trying to use it in an automated test where the parent wasn't being properly created, however once I got the child properly built, then the parent was accessible as the old documentation explained.

Debugging by setting cookies usually isn't a great practice. You could use print_r and echo.

Try using print_r to echo the arrays $rating and $design, and check if some empty.

i had the same problem on my linx server where i couldnt build my app on it just install node 18

please try:

gem install mysql2 -v '0.5.4' -- --with-openssl-dir=$(brew --prefix [email protected]) --with-ldflags=-L$(brew --prefix zstd)/lib

Were you able to solve this issue?

If you do not care about the score itself, but do care about who is the best in class, you should use ranker + binary classes as a target. Create a column "Is_first", and set it to 1 for the best students in each class and to 0 for the rest, then fit the ranker (not a classifier). In this case the result is going to be be a value between 1 and 0. Not sure it will sum up to 1 for all the students in class (you can write some code to normalize values if they do not sum up to 1).

The mail host of 'localhost' is what is striking me as odd. I'm not a bit networking guy, but I think that would me GoDaddy has you hosting your web server on the same machine or in the same VM as their mail service, which ... sounds unlikely. They should have an smtp.godaddy.com address or something like that. You may want to try a free service like MailTrap for testing an SMTP service, or something like SendGrid which I think has a free tier for several thousand free sends a month.

I have move some file dektop and try adb install

You Tube link appium error YouTube link

You'll need to change your PyCharm project interpreter settings to use a local Python environment instead of WSL.

Follow these steps:

• Open PyCharm Settings/Preferences
• Go to Project → Python Interpreter
• Click the gear icon → Add
• Choose "System Interpreter" or "Virtualenv Environment" instead of "WSL"
• Select your local Python installation or create a new virtualenv

This will prevent PyCharm from automatically starting WSL when opening projects.

Looks like it is VSCode itself, who occupies the 9003 port. And it is expected, since it listens for incoming connections.

The problem is that xdebug, running in container, cannot connect to VSCode, running on the host.

AFAIK 'host.docker.internal' does not work for linux (or WSL) by default. Please try to add these lines to your docker-compose (for 'web' container):

extra_hosts:
    - "host.docker.internal:host-gateway"

Please see this answer for details https://stackoverflow.com/a/67158212/6051839

why after loop finishes the next echo has the text from the previous echo:

because the line is NOT BEING CLEANED which causes after the loop finishes to make the cursor write over the text without cleaning it first

there's 2 solutions:

• clean line afterloop:

  read -p"Enter timer length (seconds): " num
  echo "Timer starting...now"
  sleep 1
  for i in $(seq 1 $num)
  do
    echo -en "$num second(s) remaining\r"
    sleep 1
  done
  echo -e "\r\033[K\033[34mTimer Finished\033[0m"
  

• make newline afterloop:

  read -p"Enter timer length (seconds): " num
  echo "Timer starting...now"
  sleep 1
  for i in $(seq 1 $num)
  do
    echo -en "$num second(s) remaining\r"
    sleep 1
  done
  echo -e "\n\033[34mTimer Finished\033[0m"
  

While this may not be the answer you are looking for:

I am facing the same issue. For me everything works in QEMU and when testing on another machine. This may be a platform-specific issue. Unfortunately I do not know how to resolve it.

Duplicates Android APK file too big because of lib directory

I decrease bundle size by adding

ndk {
            abiFilters.add("armeabi-v7a")
        }

into release in buildTypes in build.gradle.kts

I wrote a detailed guide on how to make a local apache server with support for multiple sites, PHP and MySQL. The articles are in Polish, but google translator translates everything nicely.

Local server installation with multi-site support - Antosik.dev (PL)

I’m having the exact same issue. I have tried everything and nothing seems to work. Could someone help?

remove the wsl and docker plugins

use like this

MERGE INTO derived_load_support.redshift_last_processed_dttm as t USING ( select 'iddna' as database_name, 'TEAM_DIM' as table_name, timestamp '2024-08-21 12:33:59.000001' as max_redshift_timestamp) as s ON s.database_name=t.database_name and s.table_name=t.table_name WHEN MATCHED THEN UPDATE SET (max_redshift_timestamp = s.max_redshift_timestamp ) WHEN NOT MATCHED THEN INSERT (database_name, table_name, max_redshift_timestamp) VALUES (s.database_name, s.table_name, s.max_redshift_timestamp)

If you are using eclipse project maven nature, and want to enable the "-parameters" compiler options, then here is a workaround:

• Open the project properties dialog / Java Compiler page
• Check the option "Store information about method parameters..."

This is The Amazing Url to Solve Custom Paint Problem Solving In Jetpack Compose https://www.youtube.com/watch?v=NSj7g0I_rHQ&list=PL6FTwTkFarHeMsx7ao3fAmWKFUzBdi1SQ&index=23

I have found this to be the most compact answer:

=ArrayFormula(SUM(--(COUNTIF(A1:A7;A1:A7)=2))/2) #for doubles
=ArrayFormula(SUM(--(COUNTIF(A1:A7;A1:A7)=3))/3) #for triples

Dropping the "ArrayFormula" component to use in excel.

try to change the node version. It's solved my problem. Use node version >=15.

use the Carbon date function. Note that the imported file format should be a CSV file.

 Carbon::createFromFormat('d/m/Y', $row['date_column']);

This guide will show you some optional and smart ways how to structure files and directories in your PHP project.

Guide link: https://docs.php.earth/faq/misc/structure/

Please try:
gem install mysql2 -v '0.5.5' -- --with-openssl-dir=$(brew --prefix [email protected]) --with-ldflags=-L$(brew --prefix zstd)/lib

This type of error often occurs when you use an unsymmetrical element that is not intended to be used in a certain way, such as wrapping a <p> tag inside another <p> tag. You can read more about it here:

• How to solve React hydration error in Next.js
• React hydration error - Next.js documentation

If possible, please update your question and add your code so I can guide you to the exact place causing this error.

You're missing the -AllUsers switch after the pipe for Remove-AppxPackage.

The correct command should be Get-AppxPackage -AllUsers -Name $bloat | Remove-AppxPackage -AllUsers

In my case, I have not added correct dependency

<dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-data-redis</artifactId>
        <version>3.3.2</version>
</dependency>

Earlier I had used spring-data-redis, Which does not have all the packages

@Steffano Aravico : What kind of cassandra installation did you do, is it tar ball installation or package ?

Sorting selected is added in 17.1.0.

See : https://github.com/Harvest-Dev/ng-select2/blob/master/CHANGELOG.md#v1710-2024-12-26

Not sure what you are going for, but assuming "similarity" means a bidirectional edge between the two characters, you can create an adjacency graph and perform a depth first search in order to cluster similarity.

Next time please show what you have tried before posting a question. The SO community is not here to write code for you... but nevertheless, I wrote some untested code to give you an idea.

col_combi = [('a','b'), ('b','c'), ('d','e'), ('l','j'), ('c','g'), ('e','m'), ('m','z'), ('z','p'), ('t','k'), ('k', 'n'), ('j','k')]

adj = {}

for item in col_combi:
    if item[0] not in adj.keys():
        adj[item[0]] = []
    if item[1] not in adj.keys():
        adj[item[1]] = []
    adj[item[0]].append(item[1])
    adj[item[1]].append(item[0])
visited = set()

curr = []
def dfs(node):
    curr.append(node)
    visited.add(node)
    if adj.get(node) != None:
        for neighbor in adj.get(node):
            if neighbor not in visited:
                dfs(neighbor)
clutter = []
for value in adj.keys():
    if (value not in visited):
        dfs(value)
        delim = ""
        for node in curr:
            print(delim + node, end = "")
            delim = "-"
        print(" ")
        curr = []

Where did you learn this about RVV in GEM5? It is there some available documentation? I haven't found anything.

Thanks in advance.

So it appears that not having set the Authentication requirements flags correctly was the root cause of my issue.

I haven't diagnosed if it is a requirement of Windows 11 or Bluetooth 5.3, but when the machine call to bond failed with a peripheral that set neither the Secure Connections and/or MITM protection flag. This on the surface seem to me like a bug in Windows if the call never returns, but I'm unsure.

Regardless if your here searching why this call isn't returning for you you can check these settings on your peripheral.

Just turn off log level with xdebug.log_level=0 in xdebug.ini file

In the page in the question,we want to deduce the T in int n2 = f(0) it says that before it conduct the deduction, it first adjust the equation(here is T&&=int)to solve, since 0 is a rvalue, we don't need to change the int to int&, then we conduct the deduction, in the deduction, the left hand side's reference is discarded, so we get T=int

Turns out there is a way to do this using the Discord app itself.

1. Set your command to be invisible to all members except admins by adding .setDefaultMemberPermissions(0) to its data property, e.g.

{
  data: new SlashCommandBuilder()
    .setName("protect")
    .setDescription("Protect a user from all visits")
    .setDefaultMemberPermissions(0)
    ),
  async execute(interaction: ChatInputCommandInteraction) {
    // action execution code...
  },
}

2. Go into your Server Settings and select the 'Integrations' panel.
3. Select your bot, and you will see a 'Commands' section.
4. Click on the command you want to customise. You will now see a panel where you can configure overrides.
5. Select 'Add roles or members', then select the member you want to give access to. You can now see the user listed under 'Role & member overrides'.

I do not believe there is a way to do this in a programmatic manner using Discord.js, but this option fits my use case.

I believe you need to add a . between $ and order, like so:

"{% $.order.userId.S %}": {}

Link to a JSONata Playground: https://jsonatastudio.com/playground/5d6a1a0b

You cannot really directly determine from within a shutdown script that the instance is being deleted. However, using gcloud compute instance-groups managed list-instances will give you an output of the current actions on instances with the column "ACTION" and there are statuses like RESTARTING, STOPPING, or DELETING.

I managed to make it work with the following steps.

Entra External ID Steps

1. Create an external tenant: https://learn.microsoft.com/en-us/entra/external-id/customers/how-to-create-external-tenant-portal

2. Prepare your external tenant: https://learn.microsoft.com/en-us/entra/external-id/customers/tutorial-web-app-dotnet-sign-in-prepare-tenant

Blazor Application Steps

1. Add package Microsoft.Identity.Web: https://www.nuget.org/packages/Microsoft.Identity.Web

2. Configure your Blazor application in appsettings.json: https://learn.microsoft.com/en-us/entra/external-id/customers/tutorial-web-app-dotnet-sign-in-prepare-app#configure-the-application-for-authentication

3. Add authentication and authorization to program.cs

builder.Services.AddAuthentication(OpenIdConnectDefaults.AuthenticationScheme)
    .AddMicrosoftIdentityWebApp(builder.Configuration)
    .EnableTokenAcquisitionToCallDownstreamApi()
    .AddInMemoryTokenCaches();

...

app.UseAuthentication();
app.UseAuthorization();

4. Add authorization at the page level. Before the page is rendered, it will ask for the user be authenticated: https://learn.microsoft.com/en-us/aspnet/core/blazor/security/?view=aspnetcore-9.0&tabs=visual-studio#authorize-attribute

5. Add authorization at the component level. The page is rendered, but some components are only displayed to authenticated users: https://learn.microsoft.com/en-us/aspnet/core/blazor/security/?view=aspnetcore-9.0&tabs=visual-studio#authorizeview-component

6. Add authorization at the code level: https://learn.microsoft.com/en-us/aspnet/core/blazor/security/?view=aspnetcore-9.0&tabs=visual-studio#procedural-logic

If you use a SetupIntent to collect the payment method then you can set the payment method as default on the subscription when you update it - https://docs.stripe.com/api/subscriptions/update#update_subscription-default_payment_method

The other option here to use Customer Portal to collect the payment method - https://docs.stripe.com/billing/subscriptions/trials#use-the-customer-portal-to-collect-payment

Hi pm vishwakarma yojana me site nhi chal rhi he

If the question is about "whether Process creation + Queue.put() pair" is FIFO, see the answer by @ozymandias. In short - nobody have said that your Processes have to finish processing and push things to Queue in the same order as the Processes were created.

However, if the question is about multiprocessing.Queue itself being FIFO (in other words, about "whether messages put() into Queue will appear in the same order when get()ting them"), the answer gets much more interesting. From my own research (combination of testing, docs, multiprocessing source code, and whatsnot) - the picture looks as follows:

• multiprocessing.Queue is FIFO with respect to different messages from the same Process.
• multiprocessing.Queue may reorder messages coming from different Processes. This is done to improve performance a bit (moving pickling to a separate Thread within the same Process where Queue.put() was called; in documentation, they refer to it as to "background thread"), and if you're not using any other communication/synchronization means to synchronize your Processes besides Queue itself - you won't be able to notice the difference. However, if you have some other synchronization between your Processes - this may become observable and may start causing trouble.
• multiprocessing.SimpleQueue seems to be strictly FIFO even between different producers.
• SyncManager (returned by Manager() call) uses shared queue.Queue, which doesn't have background thread, so it also seems to guarantee strict FIFO ordering even between different producers. This explains the effect observed by @raizinnz .

Well there is a new method to do this in 2024. This link will guide you through https://www.youtube.com/watch?v=KAhOeA3uMXs&t=105s

usb autorunner download page:= http://evasoftwarecenter.whf.bz

TLDR; use this

import os

os.environ['TF_USE_LEGACY_KERAS'] = '1'

Explanation: Transformers package uses Keras 2 objects, current version is Keras 3, packed in Tensorflow since version 2.16. Fastest fix without downgrading tensorflow is to set legacy keras usage flag as above. More info can be found here.

I have made a simple example how to instantiate and use XA-transactions inside Quarkus. Example consumes message from Artemis MQ and commits it into PostgreSQL database. Here is the link

My issue was that I was that I didn't have "MIX_" pusher keys.

For example, I have PUSHER_APP_KEY but not MIX_PUSHER_APP_KEY.

Once I added MIX_PUSHER_APP_KEY & MIX_PUSHER_APP_CLUSTER, the errors stopped.

Http failure response for https://facai88.club/api/bt/v1/payment/deposit3rdParty: 403 OK

92-63 = 31; 255-31 = 224; Voila!

This process worked for me

 public DataClasses1DataContext() : 
    base(global::System.Configuration.ConfigurationManager.ConnectionStrings["juegosConnectionString"].ConnectionString,mappingSource){}


  DataClasses1DataContext data = new DataClasses1DataContext();

It could be tricky to init fbq many times. Another way is to add params to user is set user data:

window.fbq("set", "userData", parameters);

where param could be:

{
      'em':'[email protected]', // Email
      'external_id': user12345 // User ID
      }

Maybe this helps: https://developers.facebook.com/docs/meta-pixel/guides/track-multiple-events

Bonjour les gars. Actuellement je travaille sur un petit projet et j'y ai ajouté le fontawesomefx - 8.2 et quand je termine, il ya aucune erreur qui s'affiche sur l'écran mais sur la console ca affiche : caused by: java.lang.classNotFoundException: de.jensd.fx.glyphs.fontawesome.FontAwesomeIcon. merci de m'aider s'il vous plaît.