Yes, GCC/G++ can dump its default preprocessor defines using the -dM and -E options together. Here's the command:
gcc -dM -E - < /dev/null
Or for G++:
g++ -dM -E - < /dev/null
This will output all the predefined macros, including ones like GNUC, STDC, and others, to the console. Here's what each flag does:
input.
If you are preparing for programming certifications or interviews and need more practice, you can also explore practice exams from this source: https://www.pass4future.com/questions/giac/gccc
Send in your team viewer let me tap in and help you out
Please update the windows netframework
After facing this issue where the tabs wouldn't swipe or respond to clicks when parsedResponse was passed as a parameter, I implemented a temporary workaround. Instead of using createMaterialTopTabNavigator, I used a FlatList to replicate the tab UI look and feel.
While this approach doesn't provide the swiping functionality, it allowed me to achieve the desired look. If anyone knows the solution to the original issue or has insights into why this behavior occurs, please share your thoughts.
I'd appreciate any advice or fixes for getting createMaterialTopTabNavigator to work properly with dynamic data passed as a parameter.
Jerald - you can use configure a multi tenant app registration. That would solve your issue.
Problem solved by @JaredSmith in the comments of OP (sept. 2023).
@JaredSmith:
are you installing node dependencies directly in the docker container or on something else and then copying them over? Because the bcrypt package uses node-gyp to run C++ code and that's architecture-dependent: if you compile for say, Apple silicon and then try to run that code in a x64 docker image you'll get a segfault which could explain your problem. ...if you are copying over the node_modules folder, either directly or as part of your project directory, try stripping them out and running npm i (or yarn or whatever you're using) in the container instead.
@tguichaoua:
That's it! I was using the node_module from the host system.
UPX is disabled on non-Windows due to known compatibility problems. From the source code of pyinstaller:
Disable UPX on non-Windows. Using UPX (3.96) on modern Linux shared libraries (for example, the python3.x.so shared library) seems to result in segmentation fault when they are dlopen'd. This happens in recent versions of Fedora and Ubuntu linux, as well as in Alpine containers. On macOS, UPX (3.96) fails with UnknownExecutableFormatException on most .dylibs (and interferes with code signature on other occasions). And even when it would succeed, compressed libraries cannot be (re)signed due to failed strict validation.
delete the resteasy dependencys
I cannot upvote (not enough reputation) Mahmoud answer, but I can confirm that the issue was due to a mismatch between the vm username and the ssh admin_username, which need to match.
Utpstext2edpastepasteedpastepastetext2edpastepasteedpastepasteNewNewed22exampleswud6httpsWelcometext2edpastepasteedpastepasteed22exampleswud6httpsWelcometexbox.WelcomeNewt2edpastepasteedpastepasteed22exampleswud6httpsWelcomeclips.ed22exampleswud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcome to Gboard clipboard, any text you copy will be saved here.Tap on a clip to paste it in the text box.Use theepasteed22exampleswud6httpsWelcomeclips.ed22exampleswud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcome edit icon to pin, add or delete clips.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.ejkwiej the way**`
`**
have a look into https://github.com/pulumi/examples/tree/master/aws-ts-lambda-efs if it is helping you.
This is only a warning that you don't use any tailwindcss utility classes in your project. If you remove @tailwind utilities; from your .css-File, the warning is gone.
like so:
@tailwind base;
@tailwind components;
// @tailwind utilities;
You can remove the comment when you use utility classes from tailwind. for example:
<div class="shadow-md ..."></div>
I think it is because margin collapsing. You will got different top in case a child node of the one you call getBoundingClientRect() has margin-top defined. For some reason Safari includes it when other browsers don't.
In the case of foreign key concepts the reference keyword is a burden if not used then nothing happens while the deletion of data anything happens then tell me.
After a couple of weeks of research, I realized that I don't get an error when I upload PNG format. The issue occurs when I try to upload JPEG format.Problem solved
also, COLLECTION ITEMS TERMINATED BY, LINES TERMINATED BY,MAP KEYS TERMINATED BY, are also useless while using binary stored format.Because it has its own style without any other character.
For me on Ubuntu "sudo -iu" doesn't work, but "sudo -i" does. To keep it open I have to add bash to the end of the script and you'll get a shell open to the password prompt.
let x = 9 / 2;
console.log(x); // 4.5
x = ~~x;
console.log(x); // 4
x = -3.7
console.log(~~x) // -3
console.log(x | 0) // -3
console.log(x << 0) // -3$('.btn-export').on('click',function(){
$.ajax({
url:"<?php echo admin_url('admin-ajax.php') ?>",
type:"POST",
data:{
action:"export_news_cpt",
},
success:function(response)
{
if (response !== 0) {
Swal.fire({
icon: "success",
title: "Downloaded",
text: "Thankyou for downloading this file",
});
var link = document.createElement('a');
link.href = 'data:text/csv,' + encodeURIComponent(response);
link.download = 'news_data.csv';
link.click();
} else {
Swal.fire({
icon: "error",
title: response.data.message,
text: "Something went wrong!",
});
}
},
error : function (xhr , status,error)
{
alert("AJAX Response:"+error);
},
});
});
});<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.7.1/jquery.min.js"></script>
add_action("wp_ajax_export_news_cpt", "export_news_cpt");
add_action("wp_ajax_nopriv_export_news_cpt", "export_news_cpt");
function export_news_cpt()
{
if ($_SERVER['REQUEST_METHOD'] == "POST") {
$args = [
'post_type' => 'news',
'posts_per_page' => -1,
];
$query = new WP_Query($args);
if ($query->have_posts()) {
$csv = 'Post_ID,Post_Title,Post_Date,Post Time,Category,Post Content,Post Excerpt,Thumbnail_url' . "\n";
while ($query->have_posts()) {
$query->the_post();
$post = $query->post;
$thumbnail_url = get_the_post_thumbnail_url($post->ID);
$post_date = get_the_date('Y-m-d');
$post_time = get_the_time('H:i:s');
$post_content = wp_strip_all_tags(trim($post->post_content));
$post_excerpt = get_the_excerpt();
$post_id = get_the_ID();
$post_title = get_the_title();
$category = get_the_terms($post->ID, 'news_taxonomy');
if ($category && !is_wp_error($category)) {
$category_name = $category[0]->name;
}
$csv .= '"' . $post_id . '","' . $post_title . '","' . $post_date . '","' . $post_time . '","' . $category_name . '","' . $post_content . '","' . $post_excerpt . '","' . $thumbnail_url . '"' . "\n";
}
wp_reset_postdata();
header('Content-Type: text/csv');
header('Content-Disposition: attachment; filename=news_data.csv');
echo $csv;
wp_die();
} else {
echo 0;
}
} else {
wp_send_json_error(array('message' => 'Error'));
}
wp_die();
}import { forwardRef } from "react";
interface Props {}
export const Solution = forwardRef<HTMLDivElement, Props>((props, ref) => {
return <div ref={ref}></div>;
});
errorwud6httpsWelcomeclips.ed22exampleswud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeclips.Touch6swud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeC4theud6httpsWelcomeedpastepaste22exampleswud6htbox.Welcomewud6httpsWelcomeclips.ed22exampleswud6httpsWelcomeedpastepaste22exampleswud6htbox.Welcome<description>NewonWelcomeclips.Touch6swud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeC4theud6httpsWelcomeedpastepaste22exampleswud6htbox.Welcome6swud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeC4theud6httpsWelcomeedpastepaste22exampleswud6htbox.Welcomewud6httpsWelcomeclips.ed22exampleswud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeclips.Touch`swud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeC4theud6httpsWelcomeedpastepaste22exampleswud6htbox.Welcome<descwud6httpsWelcomeedpastepaste22exampleswud6htbox.WelcomeNewonWelcomeepasteed22exampleswud6httpsWelcomeclips.ed22exam
10 years later: I find this as an official MIME-Type https://www.iana.org/assignments/media-types/application/vnd.msgpack
Yes, the HTTP HEAD verb is useful in web development.
The HEAD method retrieves headers for a resource without the response body, making it efficient for:
1.Checking Resource Availability: Verify if a resource exists (e.g., before downloading large files) by checking headers like Content-Length or Last-Modified.
2.Caching Validation: Check if a cached resource is still valid using headers like ETag or Last-Modified without transferring the content.
3.Link Checking: Tools and crawlers use HEAD to confirm URL status without downloading the content.
It saves bandwidth and improves efficiency in scenarios where only metadata is needed.
If you're experiencing a high rate of open table cache misses with multiple connections to a database, you can try these steps:
Increase the table_open_cache value If the number of opened tables is increasing rapidly, you can try increasing the table_open_cache value. Make sure your operating system can handle the number of open file descriptors required by the table_open_cache setting.
Check for unused tables If the cache contains more than table_open_cache entries and a table in the cache is no longer being used by any threads, MySQL will close and remove it from the table cache.
Check for table-flushing operations If a table-flushing operation occurs, MySQL will close and remove unused tables from the table cache. This happens when someone issues a FLUSH TABLES statement or executes a mysqladmin flush-tables or mysqladmin refresh command.
in the new version of material ui (v6) inputProps prop is deprecated and will be removed in v7. Use slotProps.htmlInput
<TextField
label='text label'
slotProps={{
htmlInput: {
maxLength: 50,
},
}}
/>
Use TypeReference:
public <T> ResultPage<T> parseResultPage(String content, Class<T> resultType) throws IOException {
TypeReference<ResultPage<T>> typeRef = new TypeReference<>() {};
return new ObjectMapper().readValue(in, typeRef);
}
repeat wait() until game:IsLoaded() and game.Players.LocalPlayer getgenv().Key = "Key" loadstring(game:HttpGet("https://raw.githubusercontent.com/obiiyeuem/vthangsitink/main/BananaHub.lua"))()
With apologies (and help from @ikegami), I've worked out that there was a system encoding issue preventing some of this working correctly, or seeming to work correctly. Still got to get the database portion working, but that will be another, hopefully less confused question if I get to that bit.
why does this not work ____________
When you create the DEFAULT PRIVILEGES you are connecte as "dba" so the privileges will be applie to objects created by dba not for objects created by "u1" this is visible when you do a \ddp command
vlab@suresh:~/qemu/scripts/qmp$ nc -U ~/qmp.sock {"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 9}, "package": "v9.2.0-636-gaa3a285b5b-dirty"}, "capabilities": ["oob"]}} { "execute": "qmp_capabilities" } {"return": {}} { "execute": "qom-set", "arguments": { "path": "/machine/peripheral/sensor", "property": "temperature", "value": 20000 } }
{"return": {}}
u can also set like this
console.log(decodeURI('user%5Blogin%5D=username&user%5Bpassword%5D=123456'))1234567£%!
For others having this issue, I solved my issue by changing the renderer from Mobile to Compatibility. So that might be worth a shot.
<head>
<style>
.grecaptcha-badge {
visibility: hidden;
}
</style>
</head>
For my case (Laravel 11, SSR, Vue 3) this is the only thing that worked.
I believe the following solution could be helpful. I’ve made some modifications to your code, which you can review here: enter link description here.
Additionally, it’s generally a good practice to split your forms into two independent forms, each with its own validation schema. This approach ensures better scalability and manageability, especially if the number of input fields increases significantly or if the dependencies between tabs become more complex.
PS: This is a solution to address the issue mentioned in the post, not an enhancement or an explanation of how to improve it further.
You can convert from one dataType of stream to another using map like
Stream.of(4, 0.1).map(i->Double.valueOf(i)).reduce(Double.MAX_VALUE, Double::min);
If you want to ensure that an object is converted into an array of objects, you can use the following approach:
typescript Copy code const car = { model: 'RAV4', brand: 'Toyota' };
const table = [].concat(car);
console.log(table); // Output: [{ model: 'RAV4', brand: 'Toyota' }] Why Use This Approach? This method is useful when you're uncertain whether you’re dealing with an object or an array of objects. Using [].concat(object) ensures the result is always an array.
Seems like new version of graphql-subscription uses asyncIterableIterator, so correct usage is:
return pubSub.asyncIterableIterator('chatSent');
This is noticeable by inspecting type definitions:
PubSub extends PubSubEngine
PubSubEngine class implements:
asyncIterableIterator<T>(triggers: string | readonly string[]): PubSubAsyncIterableIterator<T>;
In npm package "graphql-subscriptions", both asyncIterator and asyncIterableIterator are used (description is probably not updated).
You should look into ETL tools which have data connectors. This is a really easy way to get started as they do all the hard work for you and all you have to do is sign in.
We've been using Skyvia successfully for a couple of years so this is a highly recommended and cost effective option to consider.
You have to make fp global variable. What you get is fp descriptor is lost after subroutine ended, file closes, lock gets freed.
def lockFile(lockfile):
global fp
fp = open(lockfile, 'w') # create a new one
You can enable widget debugging by having same app group identifier in main app and widget target, than setting breakpoint in widget extension code.
Make sure your asset is added to both the target.
You dont need localhost:8080 and 127.0.0.1:8080 in allowedOrigins so remove them, then in your browser open the developer tools and check the error in the console, it will give you something like "Access to fetch at ... from origin 'localhost:5173'" you will need to add this URL in your config, or you can allow all by adding this .allowedOrigins("*")
You can simply remove the background of your required icon by in any tool like https://airbrush.com/ru/background-remover and after downloading the image it will give you a clear and better clarification what exactly needs to be done next!
exampleswud62023-12-25 to 2023-12-31 22023-12-25 to 2023-12-31 222023-12-25 to 2023-12-31 For some reason fb messenger and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Welcome to Gboard clipboard, any text you copy will be saved here.2025 https://4myscript.jsusageit the store and icon to pin, add or delete clips.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Welcome to Gboard clipboard, any text you copy will be saved here. clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Welcome to Gboard clipboard, any text you copy will be saved here.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Tap on a clip to paste it in the box.Unpinnedbxshffnfhhd12-25 to 2025-12-31 22exampleswud6https://4myScript.jsUsage:Tap on a clip to paste it in the text box.Use the ed12-25 to 2025-12-31 ://4myScript.jsUsage:Tap on a clip to paste222023-12-25 it in the text box.Use the that is a good time for you guys to say to a ride fr Mike Schmitz mass effect Andromeda strain 565https://4myScript.jsUsagepaste12-25 to 2025-12-31 22exampleswud6https://4myScript.jsUsage:Tap on a clip to paste it in the text box.Use the to Gboard clipboard, any text2edpastepasteedpastepaste of you copy will be saved here.
Besides all the issues mentioned in https://phusion.github.io/baseimage-docker/ , the other key win is "local IPC", not localhost.
Remote calls are a source of many evils. That is why Unix Domain Sockets have been invented.
I am not particularly fond of .NET but this article explains the why's well: https://andrewlock.net/using-unix-domain-sockets-with-aspnetcore-and-httpclient/
I am far from Kubernetes SME, but AFAIK K POD's "system calls" are all over UDS.
My advice would be: Find your balance in the number of containers vs multiple processes in containers but be aware: You want UDS whenever possible.
const openEmail = () => {
const recipient = "[email protected]";
const subject = encodeURIComponent("Subject Here");
const body = encodeURIComponent("Body content goes here.");
// Check if default email client exists (mailto)
try {
window.location.href = `mailto:${recipient}?subject=${subject}&body=${body}`;
} catch (e) {
// Fallback to Outlook Web App
window.open(
`https://outlook.office.com/mail/deeplink/compose?to=${recipient}&subject=${subject}&body=${body}`,
'_blank'
);
}
};
Both C and C++ define precision, C++11 adds more details. C++11 added the limits header file in the standard. Some defines measure mantissa bits and some measure display bytes in base 10.
C Header file: float.h
LDBL_MANT_DIG // BITs in long double MANTissa ie: 64
DBL_MANT_DIG // bits in double ie: 53
C++ Header file limits (since c++11)
std::numeric_limits<double>::digits /* bits same as DBL_MANT_DIG */
std::numeric_limits<long double>::digits /* bits same as LDBL_MANT_DIG */
std::numeric_limits<double>::digits10 /* BYTES displayed base 10 */
std::numeric_limits<long double>::digits10 /* bytes displayed base 10 */
numeric_limits has other details as well. floating point might be one of two standards, one uses an extra bit. Thats a detail you can ignore if you use the defined macros. Otherwise, if you calculate, based on bits, you might be trivially off by 1/8th.
In final i loop, G2 oddCh had write,but no read chan.(G1 already end) If you updated to
if i == 10 {
close(oddCh)
break
} else {
oddCh <- struct{}{}
}
will no deadlock.
By add targetEntity work for me.
@ManyToMany(targetEntity = Order::class )
@JoinTable(
name = "order_articles",
joinColumns = [JoinColumn(name = "order_id")],
inverseJoinColumns = [JoinColumn(name = "article_id")]
)
Apart from the ipynb kernel python environment, make sure you also have selected the correct python interpreter for the project that containing the notebook you use.
This happened to me when there were multiple commits. I tried to push to a branch using SourceTree and got a 500 error. What worked was pushing from Xcode. You can try using Terminal too, I hope this will be helpful to anyone.
Use GlobalKey:
final GlobalKey _formKey = GlobalKey();
...
child: TextField(
focusNode: node,
key: _formKey,
),
...
What would be externalId? @Sridevi
and do i need to setup application access policy to get access token
I guess this library is not maintained anymore... I took some initiative by building another library based on react native svg on my own and will maintain it in future. Do check it out here : https://github.com/vaibhavvTripathi/react-native-ez-charts
Accordding to MongoDBs docs it is no problem to store even large files dirrectly in the Database. See this article for more Information: https://www.mongodb.com/developer/products/mongodb/storing-large-objects-and-files/
Hi Are you resolve this issue.
This is Zornitsa from BALKAN App.
We have created this example with OrgChart JS for you:
https://code.balkan.app/orgchart-js/stylized-levels-in-tree-chart#JS\
Handle bash output and passing to bicep
Hello Frederic Gauthier, seems like you already found a solution to your problem, I am just posting it here for ease of other folks who are facing similar issue on SO. Please feel free to add any points/your inputs to this if required.
Thanks Charles Duffy for sharing the right input. You just need to install jq by making changes in inlineScript section. This will process the JSON output in the format you need by transforming the array in JSON into required format.
jq Transformation:
jq -r 'map("\"" + . + "\"") | join(", ")' this will converts the JSON array into a comma-separated list of quoted strings.sed 's/^/(/;s/$/)/'this will wraps the list in parentheses.Sample Inlinescript:
inlineScript: |
$(var-bashPreInjectScript)
templateFile=hub/hubconnectivite.bicep
echo "Deploying $templateFile using ${{ parameters.deployOperation }} operation"
preDeploymentRgList=$(az group list --subscription "$(var-hub-subscriptionId)" --query "[].name" -o json)
preDeploymentRgListFormatted=$(echo "$preDeploymentRgList" | jq -r 'map("\"" + . + "\"") | join(", ")' | sed 's/^/(/;s/$/)/')
echo "Formatted Resource Groups: $preDeploymentRgListFormatted"
az deployment sub ${{ parameters.deployOperation }} \
--name hubconnectivite${{ parameters.deploymentRegion }} \
--location ${{ parameters.deploymentRegion }} \
--subscription $(var-hub-subscriptionId) \
--template-file $templateFile \
--parameters \
preDeploymentRgListName="$preDeploymentRgListFormatted" \
subscriptionId='$(var-hub-subscriptionId)' \
location='${{ parameters.deploymentRegion )}}' \
otherParameter='$(var-other-parameter)'
# Post-injection script (if any)
$(var-bashPostInjectScript)
Refer:
Convert a JSON array to a bash array of strings - Stack Overflow for related query information
h2 screen db url and this application.properties url should be same
# H2 Connection
spring.datasource.url=jdbc:h2:mem:testdb
spring.datasource.driverClassName=org.h2.Driver
spring.datasource.username=sa
spring.datasource.password=root
spring.h2.console.enabled=true
spring.h2.console.path=/h2-console
In Xcode 16.2, neither window can be minimized or maximized.
In that case Command + '`' works.
I found that the problem was I using the FlatCompat facility with tseslint config. I went with removing the ...compat.extends('airbnb-base') since I'm using TS for the development.
Going with the base eslint config and implementing tslint would've removed some functionality I wanted from TSLint, so compromised on letting go of the airbnb lint.
I fixed it now by using firebase cloud functions. I am not sure why that fixed it, maybe it was because of the location of the server where the functions is beeing executed
I found out that I need to add a strict content security policy in the nginx.conf to enforce HTTPS:
add_header Content-Security-Policy "upgrade-insecure-requests";
Have a route defined for POST requests in routes/web.php like Route::post('/teachers', 'TeacherController@store')->name('teachers.store');, and check that your TeacherController has a store method to handle form submissions.
Присоединяюсь к ответу пользователя раньше, но немного изменю его код.
В коде товарища есть проблема. Данные из composeResources копируются в папку me.sample.library, что тратит в 2 раза больше памяти и является плохой практикой.
Добавить в build.gradle.kts (:composeApp)
Вот правильный вариант:
compose.resources {
publicResClass = true
packageOfResClass = "composeResources.{ваш проект}.composeapp.generated.resources"
generateResClass = always
}
Вот на моём примере:
compose.resources {
publicResClass = true
packageOfResClass = "composeResources.test_ktorfit_android_desktop.composeapp.generated.resources"
generateResClass = always
}
<fo:table-column column-number="1" column-width="auto"> which is not working. It gives some default width.. I just wanted to make it auto based on the content in the table column
Your domain is probably missing from the Access-Control-Allow-Origin header of the third-party IPs you are retrieving data from, which is why the CORS issue occurs. It is unfortunately a drawback of the browser's CORS enforcement.
Following libraries might be useful depending on your use case:
- For Tables/Grids:
- TanStack Virtual (recommended)
- react-virtualized
- For simple infinite scroll, go for react-infinite-scroller
- For General purpose :
- React Window
- Virtuoso (has some paid features)
In case you are looking for help with react-window, you can check out :
https://www.npmjs.com/package/react-window
Code Sandbox Demo Link : https://codesandbox.io/s/5wqo7z2np4
in your jdbc_url, jdbc:redshift://:5439/dev, host and database parts are missing.
The JDBC url must have the following form:
jdbc:redshift://<host>:<port>/<database>
In example:
jdbc:redshift://mycluster.myclusteruuid.eu-west-1.redshift.amazonaws.com:5439/mydatabase
You can follow this steps:
https://www.youtube.com/watch?v=r30qjtjSoRQ
I've done in a Linux mint 20 and works perfectly.
Let's say I have a name field, and I want ucfirst() on it. I just tested it is working perfectly with the name text field. CRUD edit form shows the value.
public function getNameAttribute($value)
{
return ucfirst($value);
}
But if it is an Enum field, how can it pre-select the value if it is modified on the fly and differs from the available enum options?
What I can suggest is that you create accessors with different names for your front-end website. So they don't conflict.
I have encountered this issue multiple times with a Bitbucket Cloud (Mirrored) repository. Usually, it is due to a failed sync, and resyncing the repository at https://source.cloud.google.com/ typically resolves the problem.
This time, I had to clear the repository selection from the Cloud Build trigger, select it again, and then save the trigger. After doing this, the build started successfully and identified the branch commit.
The latest version of the plugin, copy-rename-maven-plugin, dates back to 2014, and among its dependencies is the version 1.5.8 of pluxus-utils. However, during the build process, the version of plexus-utils that gets downloaded is not 1.5.8, but rather 3.5.1. The discrepancy in the version of plexus-utils being used can be attributed to Maven's dependency resolution. When multiple versions are present, Maven tends to choose the most recent one, which could result in the use of a newer version of plexus-utils.
I wouuld recommend you to post batch requests
https://graph.microsoft.com/v1.0/$batch
Here is the document for details
https://learn.microsoft.com/en-us/graph/json-batching?context=graph%2Fapi%2F1.0&view=graph-rest-1.0
I am checking your library getting errors while using the browser.
Import the correct library from this link reference:
https://jqueryvalidation.org/
This are the library links:
https://cdnjs.cloudflare.com/ajax/libs/jquery-validate/1.19.5/jquery.validate.js
https://cdnjs.cloudflare.com/ajax/libs/jquery-validate/1.19.5/jquery.validate.min.js
You can add the widget in IgnorePointer(child: ...//your widget);
IgnorePointer will ignore the widget which is added in the child and the child will be visible also.
Once widget Ignored the widget below it will be clickable.
I deleted venv and created venv with a different name. VS code python extension was trying to reference the old one. Had to F1 and Python: Clear Cache and Reload Window. The extension now correctly references the new one. Because of this, I was stuck with a wrong right-click menu (finder's context menu instead of the main context menu).
Create a pool of the preconfigured handlers with your custom certs, and then follow this guideline to create the client:
-------------test------------------------------------------
I can't explain why special character requests break only if a body is passed. This is probably a bug.
I'd like to describe a workaround. First what happens:
Client (e.g. Postman) sends UTF-8 "Städte". The UTF-8 byte stream of "Städte" is send: 53 74 c3 a4 64 74 65 (UTF-8 "ä" needs 2 bytes: c3 a4!) For some reasons ASP.NET Core MVC assumes codepage 8859-1 (Latin-1) and not UTF-8 in URI: so 53 74 c3 a4 64 74 65 becomes "Städte". For requests with bodies only!
I found a working solution with angular & javascript. https://youtu.be/i2tk43HNblc?si=N3Zk09qtARH6I1Ye he did it from starting to end.
Is the data hierarchical? If it is, you could build a custom app that still uses Graphviz to build a graph where the hierarchical groups are initially collapsed, and then allow exploration of the graph by expanding nodes.
I just built something like this to visually explore the symbols in software code (variables, functions, classes, etc).
https://marketplace.visualstudio.com/items?itemName=AtomicConcepts.atomicviz
simply delete all previous migration files except the first "0001_initial.py" migration file, then enter the makemigrations command, and migrate. clearing all previous migrations, the program would make migrations for all changes not in the initial migration without having to reference any conflicting node.
If you see this in Jenkins, just restart your BuildSwarm (disable/enable).
Thanks all. yuk and Andre Wildberg's suggestion worked.
I evolved the idea of @user3820843, added couple null checks and here's what I've got:
#include <iostream>
template<class CLASS>
class CallbackClass
{
typedef void(CLASS::*PVoid)();
private:
CLASS *p = nullptr;
PVoid pCallback = nullptr;
public:
CallbackClass() {}
~CallbackClass(){}
bool set_callback(CLASS *c, PVoid f)
{
if (!(c && f))
return false;
p = c;
pCallback = f;
return true;
}
bool callback()
{
bool r = false;
if (p && pCallback)
{
(p->*(this->pCallback))();
r = true;
}
return r;
}
};
class A
{
public:
A() {}
~A() {}
CallbackClass<A> t;
void this_callback()
{
std::cout << "Callback" << std::endl;
}
};
int main()
{
A *a = new A;
std::cout << a->t.set_callback(a, &A::this_callback) << std::endl;
std::cout << a->t.callback();
return 0;
}
https://dreampuf.github.io/GraphvizOnline
You can try this. I think it should be able to handle it.
The electron-push-receiver library no longer works with Electron for handling push notifications. Is there an alternative solution for implementing push notifications in an Electron app? If so, could you share the steps or tools to make it work effectively?
This will not be a good answer, but hopefully an almost decent breadcrumb. What you're describing has roots in robotic motion planning, which extends the basic notion of pathfinding to include volumetric concerns and degrees of freedom. A useful term to get familiar with is "configuration space", which offers some reduction of complexity. I recommend using "motion planning" as your search term, and maybe start here: https://en.wikipedia.org/wiki/Motion_planning
You're onto a tough problem but it'll be fun. Good luck!
This is a rather old question, but I would also like to share this simpler method that uses the EXCEPT operator; worked pretty well for me:
select array(
select unnest('{1,2,3,4}'::numeric[])
except
select unnest('{1,2}'::numeric[])
);
┌───────┐
│ array │
├───────┤
│ {3,4} │
└───────┘
Btw your code for substitution is not correct because it is not "capture avoiding" !!! May I suggest switching to the De Bruijn handling of binders?
is there any solution for this issues?
Intel
nano /usr/local/etc/my.cnf
Apple Silicon
nano /opt/homebrew/etc/my.cnf
Because you have 2 activate roots ('/'): one comes from app/page.tsx and another one comes from app/(route)/page.tsx. So, you can delete the page of (route) and your app will not catch that error anymore
I'm having the same issue but with buttons too. It's so annoying. Some elements are clickable and some not. If I change onTapGesture with highPriorityGesture as you suggested -> it works but then subviews of the view are not clickable at all. So that's not a solution I guess.
In my case, buttons have the same problem. Some of them are clickable and some not (in the list). Long press works, button action is triggered always like that, but single press is still the issue.
My colleague has the same code with old Xcode 15.4 and Swift 5. After compiling from his computer everything works fine even on iOS 18.2 versions of iPhone. Buttons and onTapGestures work just fine.
You can check my question too.
Just a few comments here to nuance a bit the answers given above : According the ISO 8601, the first week of the year is the week containing the first Thursday.
The logic behind this is : The first week of a month is the first week where you have a majority of days of the new month vs the previous month.
But that logic varies from company to company: Some companies consider 5 days per week. => The first week of a month is the first week with a Wednesday. (2 days old month, 3 days new month)
Some companies consider 7 days per week. => The first week of a month is the first week with a Thursday. (3 days old month, 4 days new month)
Some companies consider the 1st of the month. => The first week of a month is the first week with the 1st
The optimal solution isn't always the median. Instead, we need to try every possible target value between the minimum and maximum numbers in the list. For each potential target value, we need to consider two options for each number:
The algorithm should choose the cheaper option for each number. The total cost for a given target value is the sum of the optimal choices for each number. We then pick the target value that gives us the minimum total cost.
I've been struggling with the same issue and I think I found a solution to this that seems to be working consistently (haven't tested this more than 2 minutes, but it seems fine). Found it here https://www.javaprogrammingforums.com/awt-java-swing/4183-swing-components-invisible-startup.html
But basically: I create the JFrame as part of the class attributes (JFrame visibility set false) - then set the components visibility after adding them to the JFrame - then I set the Visibility of the JFrame to true after everything, or in a different method ---
class Main {
public static JFrame Login;
public static void main(String[] args) {
Create_Frames();
Login();
}
public static void Create_Frames() {
// === Login page GUI creation ===
Login = new JFrame("Login");
Login.setSize(400, 200);
Login.setLayout(null);
Login.setVisible(false);
Login.setResizable(false);
Login.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
JLabel Name_label = new JLabel("Enter your username:");
Name_label.setBounds(10, 10, 130, 20);
//....Other code....
Login.add(Name_label);
Login.add(Name_input);
Login.add(Pass_label);
Login.add(Pass_input);
Login.add(Login_but);
Login.add(Register_but);
Name_label.setVisible(true);
Pass_label.setVisible(true);
Name_input.setVisible(true);
Pass_input.setVisible(true);
Login_but.setVisible(true);
Register_but.setVisible(true);
}
// Other method to set frame to true
public static void Login() {
Login.setVisible(true);
}
If this worked for you please let me know
Is it possible to switch off destination url matching ? We are migrating one broker/sp to another broker/sp so there is a change in redirect url but we don't want to force our customers to change redirect url in their idp.
found a solution myself, here's the guide:
Download SSL certificate from here: https://docs.aws.amazon.com/redshift/latest/mgmt/connecting-ssl-support.html
amazon-trust-ca-bundle.crt on your PCamazon-trust-ca-bundle.pemMake sure it's publicly accessible (Amazon Redshift Serverless > Workgroup configuration > <your-wrokgroup>)
This guy is amazing his video also helped me along: https://www.youtube.com/watch?v=22K0PxjwIa0