You can use the editable prop on your component:

<DatePicker editable={false} />

There is a single starting point for each thread where all dynamically set parameters are initialized. However some of the parameters are the same across the entire process for all threads and other parameters are thread specific. Ideally it would be best if in the process later there is no need to know which parameters were set by which part and that they could all be accessed in the same way. Example: general settings: groupname = abc, base_lookback = 5 thread specific settings: final_lookback = 8 Ideally access to groupname, base_lookback, final_lookback should be the same ctx.base_lookback or ctx.final_lookback should both work without the thread having to know if the parameters are thread specific. Having a new dictionary for each thread would mean that the two parts of the data are separate or we would have to copy the general data into each thread specific dictionary.

From what I understood of extracontext it essentially does what we were trying to do - set up a contextvars which allows multiple variables. If we instantiate extracontext one time so that it acts as a singleton.

context.py
       ctx  = ContextLocal()
        file1.py
       from context import ctx
       file2.py
       from context import ctx

We would then have the same contextlocal used throughout the process. It can be initialized at the beginning with all general parameters and then per thread with thread specific parameters and it would be thread and async safe. Am I understanding correctly?

We could then add a decorator around it to lock it also.

You can do dataframe processing to collect all the val1, val2 into a list of tuple in a column e.g "vals".

The tree can be created with dataframe_to_tree_by_relation and pass in the column "vals" as attribute_cols.

Docs: https://bigtree.readthedocs.io/en/stable/bigtree/tree/construct/#bigtree.tree.construct.dataframe_to_tree_by_relation

pd.core.frame.DataFrame is a full reference to pd.DataFrame. Therefore you can type hint pd.core.series.Series as pd.Series. You see why that is in the structure of the pandas package here

Can we remove specific attribute like 'font-size' in all styles?

click on left side three dot of Project

click on behavior after that follow screen flow and always select opened file

CarToast.makeText(carContext, "Location Permission is required", CarToast.LENGTH_LONG).show()

I did smth similar for a Cassandra running on K8s behind a load balancer. The solution was to write a custom LoadBalancingPolicy where you can build the query plan as you wish. Then, you can set speculative retry delay to 0 or some small value and get the effect you want.

Also, do you have an application in another DC as well? In that case, you can delegate retries to the client of your application, saying that DC A app is unavailable due to Cassandra in that DC is unavailable, so the client should retry the call to the app in the DC B.

They propose such setup in https://docs.datastax.com/en/developer/java-driver/4.17/manual/core/load_balancing/index.html#built-in-policies .

1.You can use React Context or Redux for in- memory state . 2.Also can use localStorage or sessionStorage for state persistence across refreshes. If you have more questions or problems, then please contact me.

Have anyone got solution to this problem?

follow these steps to get the uploaded file:

• Listen for incoming requests.
• Check if the request contains multipart form data.
• Parse the request and extract the file data.
• Save the file to a local directory if needed.

I'm having the same problems with automatically created excel reports, are the reports you are connecting to also auto created? I have used transformation via helper queries using Excel.Workbook, Folder.Files, Folder.Content. All return just the header row and the first row below the headers.

So I have found an answer (but not perfect)

The formula =IFERROR(SUMPRODUCT($O$4:$AH$4;N(OFFSET($AH$3;0;-COLUMN(O3:AH3)+COLUMNS(A3:O3))));0)

Returns the correct values, but in reverse. As a result I then need to use=SORTBY(O28:AH28;COLUMN(O28:AH28);-1) to reverse the formula.

Can someone help me pack all in one formula ?

It's working for me in LangGraph version 0.2.67. The response_format parameter was added recently. Try updating with: pip install -U langgraph.

I suspect this has been disabled for all docs on ReadTheDocs though, as I read a comment about heavy loads on the servers.

Yes. This was the reason.

The error you receive indicates that there is an issue with the formatting of your .env file. In an nutshell (as @OlafdeL mentioned) for pydantic greater than 2.0.0:

from pydantic_settings import BaseSettings


class EnvSettings(BaseSettings):
    allowed_hosts: list[str]

and then your .env should look like this:

ALLOWED_HOSTS='["host-1", "host-2"]'

For people looking for types for the latest JSON Schema 2020-12 version. I just created some since I could not find it anywhere: https://github.com/nfroidure/ya-json-schema-types

I have been experiencing the same issue for the past three days if you find the solution, please share it with us

In my case "Windows Kits" folder was located outside Program Files. Copy the file and place it inside Program Files and the error should be gone.

https://tigc.in Visit this website and scroll down the page. Then, search for any product and view its description. After spending 2-3 minutes, leave the website. After a while, you will receive a WhatsApp message with the same product link.

I know this is an old thread, but I'm sure people nowadays are still experiencing this issue. I have found one line of code that I entered in the Workbook.Open procedure that prevents formulas from autofilling through the entire table(s).

Just simply add this code in the workbook.open statement:

Private Sub Workbook_Open() Application.AutoCorrect.AutoFillFormulasInLists = False End Sub

I found a Solution for anyone encountering the Issue too:

Inside the SignInScreen add:

headerBuilder: (context, constraints, shrinkOffset) {return Sizedbox.shrink();},

Solved the issue for me! :)

Resolved. All I need was to add DOCKER_HOST variable in test section of build.gradle file.

test {
    environment 'DOCKER_HOST', 'tcp://${my_remote_server_ip}:23760'
    useJUnitPlatform()
}

New Chrome shows error

[Deprecation] Listener added for a 'DOMSubtreeModified' mutation event

In the code there was like this:

$(".t706__cartwin-prodamount").bind( 'DOMSubtreeModified',function() {

I changed it to:

$("[href*='#order']").on( "click", function() {

The issue occurs because Google Play uses a different App Signing Key in production mode. To resolve this:

Check the App Signing Key in Google Play Console:

Go to Google Play Console → Setup → App Integrity. Copy the SHA-1 key under the App Signing Certificate section. Update the App Signing Key in Firebase:

Go to Firebase Console → Project Settings → Your Apps. Add the SHA-1 key from the Google Play Console under the SHA certificate fingerprints section. Save your changes, and your Google Sign-In should work correctly in production.

No additional configuration is required. Let me know if you need further clarification! 🚀

You have to initialize model that you want to use with Ranker function in flashrank, you can define like:

from flashrank import Ranker 

ranker = Ranker(model_name="ms-marco-MiniLM-L-12-v2")

then fill it like:

compressor = FlashrankRerank(model="ms-marco-MiniLM-L-12-v2", top_n=3)

compression_retriever = ContextualCompressionRetriever(
base_compressor=compressor, base_retriever=retriever)

Save the current headers as the first row of the dataframe using df.loc[-1] = df.columns and adjust the index.

Rename the columns to the correct ones with df.columns = ['column 1', 'column 2'].

Done!

I think I realised what the problem was and it was that echo isn't a program on Windows so it can't be spawned as a process. I tried calling Odin through process_exec and it displayed the usage message. This was after trying multiple commands like dir, ls, etc.

What you should try is to remove onClick and trigger postback manually with __doPostback. use this link as a guide:

__doPostBack function - CodeProject

function startTimer(e) {
    e.preventDefault();
    startMinutes = 1; 
    time = startMinutes * 60;
    btnSubmit.prop('disabled', true);
    btnSubmit.val('Resend');
    timerElement.style.display = 'block';
    if (!interval) {
        interval = setInterval(updateTimerCountdown, 1000);
    }
    __doPostack('btnSubmit', '');
    return true; 
}

https://stackoverflow.com/questions/75135147/react-router-dom-v6-useblocker#:~:text=Data%20router.%20See-,Picking%20a%20Router.,-Example%3A is now a 404! RE this comment. Can someone please check what this should be now

Fixed the issue for me by changing "Use credential providers" in nuget settings to "Nuget/.NET ...r integrated". changes in settings

Lastly restart Rider.

I hope this helps.

Have now fixed this. Thanks to those who replied. I shall try my best to recount all the steps below.

Version issues

Firstly, I built my own Docker image for Doxygen. I suspect the existing images on Docker Hub (corentinaltepe/doxygen, hrektts/doxygen) would have worked too, but I wanted full visibility for debugging. Here is the Dockerfile that I used to build my Docker image. It runs Doxygen 1.9.8 because that's the latest version available in the Ubuntu default package repository at present.

FROM ubuntu:24.04

# Update
RUN apt-get update

# Install
RUN apt-get install -y vim doxygen graphviz

# Working directory
WORKDIR /doxygen/

I then generated a default Doxyfile from this version of Doxygen and changed the following settings. I think only the first two of these settings really matter, but I have included the remaining four for completeness and because they match the settings in the Doxyfile provided by Fabrice.

EXTENSION_MAPPING = .m=C++
FILTER_PATTERNS   = *.m=/doxygen/m2cpp.pl
EXTRACT_ALL       = YES
EXTRACT_PRIVATE   = YES
EXTRACT_STATIC    = YES
GENERATE_LATEX    = NO

Having made these changes, I was sure that I was using a relatively recent version of Doxygen. Moreover, I knew that my Doxyfile matched the version of Doxygen. Ie: it didn't contain deprecated settings etc. In hindsite, I don't think any of these version issues were actually causing the problem, but it was good practise to resolve them.

EOL issues

Secondly, I ran the following Git commands suggested here.

git config core.autocrlf false
git rm --cached -r .
git reset --hard

Then I opened m2cpp.pl in VSCode and changed the End of Line (EOL) Sequence in from CRLF to LF. I had tried doing this previously but suspected Git was somehow preventing the change. On this second attempt, having run those three Git commands, the change was successful. I tested this by opening m2cpp.pl from Vim inside of an Ubuntu container and using :e ++ff=unix to show ^M carriage return characters, as suggested here. Sure enough, Vim showed that there were no ^M characters.

Shebang issues

Thirdly, I changed the first line of m2cpp.pl from #!/usr/bin/perl.exe to #!/usr/bin/perl. Apparently this is another Windows vs Unix thing. That first line tells the OS where to look for the Perl interpreter and Unix doesn't like the .exe suffix.

Testing locally

Having made these changes, I built and ran my Doxygen container locally by mounting it onto the folder that contained my Dockerfile, Doxyfile, m2cpp.pl and example MATLAB code in need of documentation.

docker build doxygen-image .
docker run -it --mount type=bind,src=$pwd,dst=/doxygen/ doxygen-image

Since I ran the container in interactive mode -it, I was able to manually run commands in it. I ran the following commands inside of the /doxygen/ folder. The first one gives executable permission to m2cpp.pl and the second one runs Doxygen.

chmod +x m2cpp.pl
doxygen Doxyfile

This produced HTML files containing the expected documentation. Very good.

Testing in pipeline

Finally, I needed to run all of this automatically inside of a BitBucket Pipeline. Here is the bitbucket-pipelines.yml file that I wrote for that. There are no new 'discoveries' here - it just implements the same steps as when I was testing locally. The two export commands are needed for building Docker images inside of a BitBucket Pipeline according to this thread. The command for running docker differs slightly from when I was testing locally. I don't entirely understand the difference, but the output seems to be the same. This automatically generates HTML documentation inside of the Pipeline. At present, I then manually download these files from BitBucket, but I shall configure this to instead send them to the server that will host the documentation.

image: docker:27.4.0

pipelines:
  default:
    - step:
        name: Doxygen
        script:
          # Give executable permission to Doxygen MATLAB filter
          - chmod +x m2cpp.pl

          # Build Docker image
          - export PATH=/usr/bin:$PATH
          - export DOCKER_BUILDKIT=1
          - docker build -f Dockerfile -t doxygen-image .

          # Run Docker container, mount pwd, run Doxygen, remove container
          - docker run --rm -v $(pwd):/doxygen/ doxygen-image /bin/bash -c "doxygen Doxyfile";
        artifacts:
          - html/**
        services:
          - docker

I feel stupid... It was not related to the Azure configuration per say. It was an additional parameter i didn't see in the initialisation of the Authentication on the server.

I was using passeport-microsoft strategy and changing prompt: 'consent' solved the issue :

authenticate(req: any, options: any) {
    options = {
      ...options,
      accessType: 'offline',
      prompt: 'select_account',  // previsously was 'consent'
      loginHint: req.params.loginHint,
      state: JSON.stringify({
        transientToken: req.params.transientToken,
        redirectLocation: req.params.redirectLocation,
        calendarVisibility: req.params.calendarVisibility,
        messageVisibility: req.params.messageVisibility,
      }),
    };

    return super.authenticate(req, options);
  }

this thread helped me find out

Thanks for your help @Rukmini

I had the same issue. Remove references to the no.nils.wsdl2java plugin. Apply the io.mateo.cxf-codegen plugin and configure it to generate Java classes from WSDL files.

Here is a simple way to access CSS variables from the <script> tag :

const rootStyles = getComputedStyle(document.documentElement);
const neutralColor = rootStyles.getPropertyValue('--color-neutral');

This might help:

Account.Order.Product[ProductName != "Hat"].ProductName[]

JSONata playground: https://jsonatastudio.com/playground/eca26832

I have this problem aswell with using wsl on Windows. i haven't really found a solution to this but instead of using 127.0.0.1:8000 you can use localhost:8000.

It still opens a new server for you on a new port but i dont know if this will give any problems later on.

You can use MATLAB save function:

https://www.mathworks.com/help/matlab/ref/save.html

Using Turbo 8 via turbo-rails 2.0.11: autofocus did not work for me. It always moves the cursor to the start of the line in Firefox. Also, only one input field can have autofocus, but maybe I should have tried adding an ID for this.

The turbo_permanent attribute works great. I am using #search to automatically submit after a certain timeout, triggering Turbo.visit(url, { action: "replace" }) to also update the GET params in the URL, no POST request needed.

  <%= form.text_field :test_name,
                   placeholder: "Filter by test name...",
                   value: params[:test_name] || session[:test_name],                          
                   data: {
                     turbo_permanent: true,
                     action: "input->search-form#search keypress->search-form#submitOnEnter"
                   } %>

I encountered the same errors too and I still haven't found anything. Good luck finding a solution.

I have a little knowledge of Amazon S3, but i saw the issue of the boto official on the github. boto doesn't support for the python version 12 because boto3 only support for the python 3.11, 3.12, 3.13 and boto is no longer supported this year. my suggestion is to upgrade boto to boto3 if you want. I hope this answer can help you :)

Thanks

=TRANSPOSE(SUMPRODUCT(TRANSPOSE(B2:B6), TRANSPOSE(COUNTIF(ROW(C2:C6), ROW(C2:C6)))))

You will also notice your Gradle Daemon is also not started.

• Step 1. rm -rf node_modules
• Step 2. npm install or yarn install
• Step 3. cd android
• Step 4. chmod +x gradlew
• Step 5. ./gradlew assembleDebug
• Step 6. ./gradlew clean
• Step 7. cd ..
• Step 8. npx react-native run-android

Happy Coding ;-|)

If your are selecting any text/Big length data's columns then your short option can takes time. No matter you are running short or conditions on this column or not. Try to remove this column from select list and check the response time, if response is fast then check some alternative solutions.

Instead of using plain width try using max-width and min-width

Finally I found the answer, only 2 lines :)

const flagsmith = useFlagsmith();
const allFlags = flagsmith?.flags;

These two commands saved me too.

sudo microk8s.refresh-certs --cert ca.crt and

sudo microk8s.refresh-certs --cert server.crt

Thanks a lot. 👍

ActiveDocument.Tables(1) .This refers to the first table in the document. Rows.Alignment. This centers the specified table horizontally.

ActiveDocument.Tables(1).Rows.Alignment = wdAlignRowCenter This works well and if you have any questions or problems , please contact me.

Just ran into this myself with another application, even when using unencrypted connections set by string.

Found a suggestion in the WINE bugs tracker to set an override for secur32.dll to native. This worked for my application.

I'm facing same issue right now. after my reserach i found that The problem is audio format. the ogg format does not work IOS or Safari.

Also i checked it with various audio files like mp3, amr, wma by using the sample audio resource : https://espressif-docs.readthedocs-hosted.com/projects/esp-adf/en/latest/design-guide/audio-samples.html

Could you find a solution? I tried the "Double Head trick", but this didn't help.

Still not working. Anyone has idea about it.

The ways is coming but unfortunately the country map is missing.

Screenshot about the map

You can use an ADO.NET connection with the ODBC Data Provider. This helped me solve the same issue with PostgreSQL.

The following article describes how to set nice value of thread: https://www.linkedin.com/pulse/how-modify-priority-linux-normal-non-real-time-threads-maxim-tseitlin-g67ge/

It contains code examples.

You can just use horizontal-align { margin-inline-start: auto; margin-inline-end: auto; } this will center the element exactally at center

I need this very much. My problem is that Students can edit their profiles at any Time, and they are using them to exchange or store cheat sheets during exams. Since outside the course everyone is Authenticated user...

I found this article by Zell Liew a nice approach.

I was unable to put WSL to work so I installed python and it worked enter image description here

The issue you're encountering seems related to the session timing out due to idle inactivity, which causes the session to expire. This results in the "Cannot read properties of undefined" error in your JavaScript when the user attempts to interact with the page after the session has expired. Since this works fine during development in Visual Studio but not when deployed, the problem likely stems from how the session timeout and cookies are managed in IIS or the ASP.NET application configuration.

Or Implement session expiration handling in JavaScript and/or server-side logic to gracefully handle expired sessions.

Or If necessary, investigate load balancing issues or use a centralized session store.

Styling the indicatorContainer has no effect. You should apply the styles more specifically to dropdownIndicator and clearIndicator, even though the css naming convention refers it as indicatorContainer.

The inconsistency in the names tricked other people too, as discussed here: https://github.com/JedWatson/react-select/issues/4173#issuecomment-680104943

Emacs 29 has a new command-line option, --init-directory [path].

This means you don't need any external packages like chemacs2

Additional Reference:

• https://emacs.stackexchange.com/a/78739/36093
• Windows: How does --init-directory work in Emacs 29 on Windows?

Use the Release version in Visual studio , and know that the working dir in $(ProjectDir) and you can change it in the solution explorer and it will work Insha'Allah!

I am faceing the same question, but there is nobody anwser this good quetion.

However I asked chatGPT to achieve this effect which is really similar to your desire behavior. I hope this can help for others to refer it. Here is code:

import 'package:flutter/material.dart';

void main() => runApp(const MyApp());

class MyApp extends StatelessWidget {
  const MyApp({super.key});

  @override
  Widget build(BuildContext context) {
    return const MaterialApp(
      home: GestureControlledPage(),
    );
  }
}

class GestureControlledPage extends StatefulWidget {
  const GestureControlledPage({super.key});

  @override
  _GestureControlledPageState createState() => _GestureControlledPageState();
}

class _GestureControlledPageState extends State<GestureControlledPage>
    with SingleTickerProviderStateMixin {
  late AnimationController _controller;

  @override
  void initState() {
    super.initState();
    _controller = AnimationController(
      vsync: this,
      duration: const Duration(milliseconds: 300),
    );
  }

  void _handleDragUpdate(DragUpdateDetails details) {
    // Update the controller's value based on the drag position
    double delta = details.primaryDelta! / MediaQuery.of(context).size.width;
    _controller.value -= delta;
  }

  void _handleDragEnd(DragEndDetails details) {
    if (_controller.value > 0.5) {
      // Complete the transition
      Navigator.of(context).push(_createRoute()).then((_) {
        _controller.animateBack(.0);
      });
    } else {
      // Revert the transition
      _controller.reverse();
    }
  }

  Route _createRoute() {
    return PageRouteBuilder(
      pageBuilder: (context, animation, secondaryAnimation) => const NewPage(),
      transitionsBuilder: (context, animation, secondaryAnimation, child) {
        const begin = Offset(1.0, 0.0);
        const end = Offset.zero;
        const curve = Curves.ease;

        var tween =
            Tween(begin: begin, end: end).chain(CurveTween(curve: curve));

        final offsetAnimation = !animation.isForwardOrCompleted
            ? animation.drive(tween)
            : (_controller..forward()).drive(tween);

        return SlideTransition(
          position: offsetAnimation,
          child: child,
        );
      },
    );
  }

  @override
  Widget build(BuildContext context) {
    return Scaffold(
      body: GestureDetector(
        onHorizontalDragUpdate: _handleDragUpdate,
        onHorizontalDragEnd: _handleDragEnd,
        child: AnimatedBuilder(
          animation: _controller,
          builder: (context, child) {
            return Stack(
              children: [
                // Current page
                Transform.translate(
                  offset: Offset(
                      -_controller.value * MediaQuery.of(context).size.width,
                      0),
                  child: Container(
                    color: Colors.blue,
                    child: const Center(
                      child: Text(
                        'Swipe to the left to push a new page',
                        style: TextStyle(color: Colors.white, fontSize: 24),
                        textAlign: TextAlign.center,
                      ),
                    ),
                  ),
                ),
                // Next page (slides in)
                Transform.translate(
                  offset: Offset(
                      (1 - _controller.value) *
                          MediaQuery.of(context).size.width,
                      0),
                  child: const NewPage(),
                ),
              ],
            );
          },
        ),
      ),
    );
  }

  @override
  void dispose() {
    _controller.dispose();
    super.dispose();
  }
}

class NewPage extends StatelessWidget {
  const NewPage({super.key});

  @override
  Widget build(BuildContext context) {
    return Scaffold(
      appBar: AppBar(
        title: const Text('New Page'),
      ),
      backgroundColor: Colors.green,
      body: const Center(
        child: Text(
          'This is the new page!',
          style: TextStyle(color: Colors.white, fontSize: 24),
          textAlign: TextAlign.center,
        ),
      ),
    );
  }
}

For node version 22.x and above you can use setDefaultHeaders: false in the http request options [default is true] DOCS.

You can follow this guide in order to fetch the stripe fees per transaction:

// Set your secret key. Remember to switch to your live secret key in production.
// See your keys here: https://dashboard.stripe.com/apikeys
const stripe = require('stripe')('sk_test_....');

const paymentIntent = await stripe.paymentIntents.retrieve(
  'pi_...',
  {
    expand: ['latest_charge.balance_transaction'],
  }
);

const feeDetails = paymentIntent.latest_charge.balance_transaction.fee_details;

For me this error occurred when changing Elastic beanstalk from single instance to load balanced, and it was caused because I had only one availability zone in Load balancer network settings

I managed to install the library using the 2023 version of coinhsl which is installed using meson.build. The README suggests to install meson from their website. I found, that it works to install meson within MSYS2 via pacman -S mingw-w64-x86_64-meson.

First of all, thank you for including a query with test data to reproduce the issue, that is very helpful.

This seems to be a bug, those two (NOT t.id IN [1,3] and t.id <> 1 AND t.id <> 3) should result in the same thing. This is being investigated by the engineering team. I will post here when I hear something more.

I encountered the exact same issue. Did you find a solution for this?

You should probably run the brew doctor command to see what you are missing. You will probably get a message to run certain folder creation commands including permissions set: You should create these directories and change their ownership to your account. ...

[UPDATE 2025]

Looking at MDN, there is no reference to any paint event existing on the window object and there is no reference to any window.onpaint method, even in the list of deprecated methods. After searching on the internet, there is no reference of such method, except the two Stacckoverflow questions (this one and the one mentioned in the question).

The 2024 EcmaScript standard (https://262.ecma-international.org/15.0/) does not mention such event or method.

Last but not least, window.onpaint is never called automatically by the browser. A simple test can be done:

    <script>
        window.onpaint = () => {
            console.log("hello stackoverflow from window.onpaint()")
        }
    </script>

The snippet above won't log anything into the console.

In other words, feel free to define window.onpaint but don't expect this function to be called when initializing the DOM.

Control-flow graphs represent the flow of control of a program; if a CFG makes sense for your binary files in any way, they are necessarily executable one way or another, given an entry point.

Once you have your entry point as an address or function symbol, you can feed it to your binary analysis tool/library/platform and extract your CFG. There are many free open-source solutions, such as angr, BAP...

Note, if you can get rid of the binary analysis requirement and integrate this to a compile chain, LLVM is a powerful tool for this task.

are the same thing, the first is for testing a precise number of calls, the second, verify(mockObj).foo();, actually does this:

public static <T> T verify(T mock) {
return MOCKITO_CORE.verify(mock, times(1));}

So it only changes for the readability of the code.

A few options depending on the quality of the data: If the location name field is unique, then you could use "Join attributes by field value", specifying the location field as the field to join, and discarding any that don't match.

If the matching polygons in file_1 and file_2 are identical, then you could use "Join attribute by location" and then geometry predicate "equals" rather than intersect, again discarding those that don't match.

If the polygons don't match exactly: this is where you might need to use your own judgement: If the polygons within each layer are widely spread you could use the "intersect" predicate in join by location instead. You could also use the "intersection" tool to determine overlaps between the two layers and join them based on that, but this may need some extra steps to clean the data.

Some simpler options there, I'm sure someone will come by with a neater solution!

CPU-bound tasks: ProcessPoolExecutor will usually outperform ThreadPoolExecutor because it bypasses the GIL, allowing full parallelism on multiple CPU cores.

ThreadPoolExecutor will typically be slower for CPU-bound tasks because of the GIL, which limits the execution of Python code to one thread at a time in a single process. I/O-bound tasks:

ThreadPoolExecutor is typically faster because threads can run concurrently, and since I/O tasks spend most of their time waiting (e.g., for network responses), this doesn't affect performance significantly. ProcessPoolExecutor will be slower for I/O tasks due to the overhead of creating and managing separate processes, which is unnecessary when the tasks spend most of their time waiting.

Key Takeaways: CPU-bound tasks: Prefer ProcessPoolExecutor for parallelizing CPU-intensive operations. I/O-bound tasks: Prefer ThreadPoolExecutor for operations that involve waiting, such as web scraping or network requests.

Try using Text.RegexReplace function.

So if you're stuck in an infinite cloudflare validation, it means that you are detected as bot, or something is off with your browser... Example: You are using a cloudflare bypass extension. What i found works is to use an undetected browser on your bot... puppeteer-real-browser in Nodejs and Seleniumbase in python seems to work for me, not all the time but they get the job done.

Hope it helps.

00:08:49:00:0B:49 27673855#

enter link description here

The examples above did not work for me, so I provide my solution :

#redirect root "page" /cat-freelances/ to /freelances/ but not children pages. 
RewriteCond %{REQUEST_URI} ^/cat-freelances/?$ [NC]
RewriteRule ^ /freelances/ [R=301,L]

After trying a bunch of things from mingw-w64, Cygwin and source forge, vs dev tools... I removed everything and installed latest releases from tdm-gcc and it works now properly

Check this answer as my answer here under your question is getting deleted https://stackoverflow.com/a/79383937/9089919

You should use var in stead of val for your properties in MyEntity.

This is needed to get setters in the underlying java-pojos.

Generate migration file from your existing database in laravel (click)👇👇👇

https://techbisen.com

open the website and go to services

In the end I just used two decimals for latitude and longitude.

I have the same problem, wanted to make sorting for a table, like in Excel. Turns out setting the width of <select> element to 1rem is just enough for the arrow to appear, but not any text.
Downside is that the selected text will not appear, but this can be changed with JavaScript, or even CSS. Also the arrow won't ben centered, but in these situations you want no border, no background and no padding.

select {
  width: 1rem;
  padding: 0;
  border: none;
  background: transparent;
}

<select>
  <option>Option 1</option>
  <option>Option 2</option>
  <option>Option 3</option>
</select>

Thanks for bringing this to our attention. This will require a change to the SDK. We will try and address it in the next available release.

Answer:

This issue can have several causes. Some possible solutions are:

1. Check that the module paths are set correctly in the production environment.

2. Check that the Puppet configuration files (puppet.conf) are configured correctly.

3. Make sure that the production environment is defined in the Puppet server.

4. Check that the module folder permissions are set correctly.

5. Check the Puppet logs for any hidden errors.

6. Make sure that the manifest files in the production environment are written correctly.

It is recommended to carefully review your Puppet and environment settings for more accuracy.

It should be taken into account that uppercase digraphs are transliterated correctly:

Њива > Njiva

ЊИВА > NJIVA not NjIVA

I Checked this by running in an online compiler and its printing 0 as expected.

#include <ctype.h>
#include <stdio.h>

int main() {
    printf("%d", isupper(97)); // its printing 0
    return 0;
}

what worked for me was deleting the lines where I used toolbar.

// .toolbar {
//     ToolbarItem(placement: .navigationBarTrailing) {
//         PhotosPicker(...)
//     }
// }

I tried everything else but toolbar doesn't work with preview.

I came across the same problem and really struggled with it because i had an error decoding json and an incomplete string when printing so I thought I wasn't receiving the entire communication. I saw the answer to this post saying to use "debugPrint" but i still had an incomplete string so it really lead me in the wrong direction.

Turns out my string was complete but debugPrint doesn't show it entirely either, if anybody struggles with the same problem.

You can use "Expo Application"

Read more here https://docs.expo.dev/versions/latest/sdk/application/

import * as Application from 'expo-application'; 

Application.nativeApplicationVersion

Auto-scroll without jquery

let element = document.getElementById('element-id');
element.addEventListener('scroll', (e) =>{                                                                                                       
if(e.target.scrollTop >= 140){                                                                                                                                                                                                      
element.scrollTop = 10;                                                                                                 
}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       
})
function scroll(){ scroller.scrollBy(0,1)                                                                                                                                                                                                                                                                                                                                                                                                                                                       
}                                                                                                                                                                                   
setInterval(scroll, 10)

This method auto-scroll HTML element infinity

Had this issue as well and was also running through VSCode like @rachel-piotraschke-organist. It may be something VS Code injects for debugging.

setting .setAppId('1234567') should fix this. You can get your AppID on your console cloud dashboard. While the drive.file scope is highly limited, you can you use for some functionalities.

The was a bug which was recently fixed that might have caused this. A fix should be released as part of Beam 2.63.0.

Here everything is good. But getting an issue that When I integrate this then everything is running fine. But my api is working. here cors error occured, while I had already enable my cors. So Here is my suggestion that when you are integrating this code then make sure that you are not working with.

The problem was the line keyboardDismissBehavior: ScrollViewKeyboardDismissBehavior.onDrag, after we removed it the soft keyboard stayed open.

can use like this

   builder.Services.AddCors(options =>
    {
        options.AddPolicy("AllowAll", builder =>
        {
            builder.AllowAnyOrigin()
                .AllowAnyMethod()
                .AllowAnyHeader();
        });
    }); 
    var app = builder.Build();
    app.UseCors("AllowAll");