I have ENABLE_BITCODE only in my Target that is already No, but still getting same error

Seems like I am having the same issue here Harri my friend, I will let you know if I can get it working. Seems like a poorly designed module.

https://<153986_auth/idapp_prgmid/[true]_authenticity/comG.M.E.G.PadSHA256

Have you figured this out ? Just ran into this a few days ago and it's been driving me nuts.

I tried using containerSasToken=?${{ secrets.CONTAINER_SAS_TOKEN }} but still facing same error.

Assuming that you've updated to Next 15, caching is no longer enabled by default.

https://nextjs.org/blog/next-15#get-route-handlers-are-no-longer-cached-by-default

Is there a solution to this problem now? I have encountered this problem before and it has been resolved. But I encountered it again and it didn't work well. You can refer to this article for details and try it out

https://blog.csdn.net/m0_66975650/article/details/143039495?spm=1001.2014.3001.5501

ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss

Is there a way to friend all the tests within a class?

Are you looking to attach the csv output in the email? If so you can't do that. This medium article provides an alternative option. https://medium.com/@sanusa100/how-to-email-snowflake-data-as-attachments-without-attaching-files-e2844669a5a9

yes, I completed the certifcation process today with Spectrum Shades. What did you need to know?

What did you end up doing?????

@Jonathan Borrelli I have the same problem with SDL3-3.1.6. Can you tell me how you installed the SDL3_Image library?

You can access old versions of android studio from this link

https://developer.android.com/studio/archive

If anyone of you are still alive can you please help me. A have a simmilar problem but instead of 3i+1 a have 1/1+r

In the following line: !!sqlcmd /E /S$(SECONDARY) -i DRRestoreDatabase.sql -v BKDIR="$(SBKSHARE)" -v DATADIR="$(SDATADIR)" -v LOGDIR="$(SLOGDIR)"

Where should I get the script "DRRestoreDatabase.sql"?

I use Ray.so and when I want more customization I prefer Snappify

Thanks for sharing your knowledge! It helped me a lot! From: Brazil :)

@Angelo Mazza, hi!

Please, explain, what 'im using this but doesnt work' means? Because there are plenty of reasons why it might not work actually =)

Caused by "expo-web-view" library. Issue was gone after I uninstalled it

using 60% from user1 data and 100% from few other imposters cause a huge data inbalance. isnst it?

I found out the answer in

React onClick function fires on render

turns out I was calling this function wrong

same issue with imread() , tx for the workaround!

can you share the git config? what is the default editor after windows 11 upgrade?

From man git-commit:

ENVIRONMENT AND CONFIGURATION VARIABLES The editor used to edit the commit log message will be chosen from the GIT_EDITOR environment variable, the core.editor configuration variable, the VISUAL environment variable, or the EDITOR environment variable (in that order).

I have tried in excel but i am not much good in excel could please share excel of moon phase date wise tried but unable to make one.

Thank to @Someprogrammerdude and @AndersK, I could reajust my thoughts and correct the code. Please refer to the comments above. Thanks again!

I'm facing the same issue while adding whatsapp.

i think that nc is used to connect to the port and input some info. but now u said that use nc to make port listen, what does it mean?

Thanks for this solution!

My idea was similar to @Kek Silva:

$user = [System.Security.Principal.WindowsIdentity]::GetCurrent().Name
$regRights = [System.Security.AccessControl.RegistryRights]::SetValue
$inhFlags = [System.Security.AccessControl.InheritanceFlags]::None
$prFlags = [System.Security.AccessControl.PropagationFlags]::None
$acType = [System.Security.AccessControl.AccessControlType]::Deny

$rule = New-Object System.Security.AccessControl.RegistryAccessRule($user, $regRights, $inhFlags, $prFlags, $acType)
$acl = Get-Acl 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.log\UserChoice2'
$acl.RemoveAccessRule($rule)
$acl | Set-Acl -Path 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.log\UserChoice'

Remove-Item -Path HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.log\UserChoice -Confirm:$false

Can someone explain why the typical approach doesn't work?

dateFullCellRender is now deprecated - how do you fix this issue still persists for me using cellRender. Thanks

I am also looking for anchor text for url placement. For example of my text is Enhance.

Clio Automation, clio integration and workflow

https://zeep.ly/pgGhi

https://zeep.ly/rkWyo

It seems to me I found nessesery information (link above). https://docs.geoserver.org/2.19.x/en/user/geowebcache/webadmin/defaults.html  In the cache defaults setting, we can configure reset cache policies:)

I found the problem solved in this post, you can refer to it.

Laravel 5 : Use different database for testing and local

is this problem only in this project or all projects? is this project you downloaded or not created in your PC? is this your first time to run project? can you show Flutter doc and grade files? did you try flutter clean and after that flutter pub get?

Found the solution!

When getting episode information from the playack endpoint use this:

GET https://api.spotify.com/v1/me/player?additional_types=episode

It is easy to find ith smallest in a O(Log n) time which is better than O(n). The approach is to augment the RB tree into an Order statistics tree. the detailed explaination is found at

https://cexpertvision.com/2024/11/03/augmenting-data-structures/

https://www.youtube.com/watch?v=kqdX4jsdYJM

Thanks to Wiktor, lookaround is not supported

for beginners, click on "maven-build-scripts-found" button of the notification from intellij.

i found this solution on second week of start working with intellij.

Maven Build Scripts Found - IntelliJ - What are the build scripts, where are they cached?

I also tried this code but it doesn't work for me.

Have you solved this issue? I'm having the same project like this

I used the wrong login lol. I used the account-id and user-id from the account detailes instead of creating a key.

driver.Manage().Window.Maximize();

hi did u manage to get an answer to this? facing the same problem too.

So, this was ciphers setup. Had to shuffle them to get the 200 Code as expected.

I am Pathik Singh, and I want to tell you that there are many plugins which can solve your problem like: 1). SiteOrigin Widgets Bundle 2). Custom Sidebars 3). Widget Options 4). WP Tab Widget 5). Meks Smart Author Widget

You could create a default variablegroup "default" with 1 dummy variable. If the developer does not provide a specific group name then your pipeline used the "default" group, else the specific group?

Please try clicking on the "Toggle device toolbar" sign.

I am doing the same thing as you in TVZ rn hahahahahah and this happens to me as well... C function calls copy a 100MB file with 1B buffer in 3 seconds, while system calls do it in 7-8 minutes have you figured it out?

hey i see you have managed to work with auth0 on your expo app, im sorry i dont have an answer to your question, but im stuck and cant make auth0 window open at all at the line code: await authorize(); could you please tell me what im doing wrong? Auth0 doesnt work on Expo CLI development

I want to know if it is a three-party evolutionary game, how should I set up the interaction logic between the three parties?

@pierpy linkedin was just an exmaple, yt dlp scarpes everything on the about page except the links. i understand its video/audio downlaoder but does scrape metadata; i wanna know if it can scrape the links too

Facing the same problem when create a mesh model from point cloud.

I am running into the same issue and installing systemfonts is not working for me (MacOS). My Rstudio is updated.

What is the point of the srcset attribute if mobile users end up downloading the higher resolution image along with the scaled down image anyway? Wouldn't that simply cause longer loading times, defeating the purpose performance-wise?

Please find this article for the same - https://www.marcogomiero.com/workshops/introducing-kotlin-multiplatform-in-an-existing-mobile-app

I got this error message while I am installing the Opencv module in Python 3.8 version. It is asking me to Be Failed to build again and again Please help me with this

ERROR: Failed building wheel for opencv-python Running setup.py clean for opencv-python Failed to build opencv-python

Pessentrau - any updates on this? I am interested in adding a BLE python client to RPi too.

I believe I identified the problem. The application I'm developing uses a clean architecture with DDD to enrich the models. For the User entity, which contains several properties, I defined all of them as ObjectValues. For example, for the Id, I created a class called UserId; for the name property, I created a class called UserName, and so on. I applied the same approach to the Role entity, creating a RoleId class for the Id and UserRole for the role name.

// Object Values / User

public class UserId
{
    public Guid Value { get; }

    private UserId(Guid value) => Value = value;

    public static UserId Of(Guid value)
    {
        ArgumentNullException.ThrowIfNull(value);
        if (value == Guid.Empty)
        {
            throw new Exception("UserId cannot be empty");
        }
        return new UserId(value);
    }
}

public class UserName
{
    public string Value { get; }

    private UserName(string value) => Value = value;

    public static UserName Of(string value)
    {
        ArgumentNullException.ThrowIfNull(value);
        if (string.IsNullOrWhiteSpace(value))
        {
            throw new Exception("UserName cannot be empty");
        }
        return new UserName(value);
    }
}

// Object Values / Role
public class RoleId
{
    public Guid Value { get; }

    private RoleId(Guid value) => Value = value;

    public static RoleId Of(Guid value)
    {
        ArgumentNullException.ThrowIfNull(value);
        return new RoleId(value);
    }
}

public class RoleName
{
    public string Value { get; }

    private RoleName(string value) => Value = value;

    public static RoleName Of(string value)
    {
        ArgumentNullException.ThrowIfNull(value);
        if (string.IsNullOrWhiteSpace(value))
        {
            throw new Exception("RoleName cannot be empty");
        }
        return new RoleName(value);
    }
}

Next, within each User and Role model, I created the respective navigation properties. In the User entity, I created the Roles property like this:

public List<Role> {get;set;}.

And in the Role entity, I created the Users navigation property:

public List<User> Users {get;set;}.

public class User : Entity<UserId>
{
    public UserName? UserName { get; set; }
    public List<Role> Roles { get; set; } = [];

    public User() { }

    public User(Guid id, string userName, string userEmail)
    {
        Id = UserId.Of(id);
        UserName = UserName.Of(userName);
    }

    public static User Create(Guid id, string userName)
    {
        return new User(id, userName);
    }
}

public class Role : Entity<RoleId>
{
    public RoleName RoleName { get; set; } = default!;
    public List<User> Users { get; } = [];
    public Role() { }

    public Role(Guid id, string roleName)
    {
        Id = RoleId.Of(id);
        RoleName = RoleName.Of(roleName);
    }

    public static Role Create(Guid id, string roleName)
    {
        return new Role(id, roleName);
    }
}

In the database context (SQL Server), within the OnModelCreate method, I defined table names, primary keys, and converted the ObjectValue properties to primitive values as follows: For example, for the User entity Id, I did this: builder.Property(u => u.Id).HasConversion(id => id.Value, value => new UserId(value));. I applied the same logic to the rest of the User properties as well as for the Role entity. Finally, I defined the relationship between User and Role as many-to-many, as shown below:

// Users

builder.ToTable("Users");
builder.HasKey(u => u.Id);
builder.Property(u => u.Id).HasConversion(id => id.Value, value => UserId.Of(value));
builder.Property(u => u.UserName).HasConversion(prop => prop!.Value, value => UserName.Of(value));

// Roles
builder.ToTable("Roles");
builder.HasKey(r => r.Id);
builder.Property(r => r.Id).HasConversion(id => id.Value, value => RoleId.Of(value));
builder.Property(r => r.RoleName).HasConversion(prop => prop!.Value, value => RoleName.Of(value));

// Many-to-Many Relationship
modelBuilder.Entity<User>()
    .HasMany(u => u.Roles)
    .WithMany(ur => ur.Users);

Then, through the context injected in a controller method, I attempted to perform a simple query to retrieve the user identified by Id = "58c49479-ec65-4de2-86e7-033c546291aa" along with their assigned roles as follows:

var user = await _context.Users
    .Include(user => user.Roles)
    .Where(user => user.Id == UserId.Of("58c49479-ec65-4de2-86e7-033c546291aa"))
    .SingleOrDefaultAsync();

When executing this query, it didn’t return the user's associated roles (which do exist), and it generated an exception indicating that the query returned more than one record that matches the filter, which isn't true since there's only one user with a single role in the database. After much trial and error, I decided to replace the ObjectValues used as identifiers for the User and Role entities with primitive values, in this case Guid. I removed the ObjectValue-to-Primitive transformation line in OnModelCreate for both user and role, resulting in the following setup:

// Users

builder.ToTable("Users");
builder.HasKey(u => u.Id);
builder.Property(u => u.UserName).HasConversion(prop => prop!.Value, value => new UserName(value));

// Roles
builder.ToTable("Roles");
builder.HasKey(r => r.Id);
builder.Property(r => r.RoleName).HasConversion(prop => prop!.Value, value => new RoleName(value));

// Many-to-Many Relationship
modelBuilder.Entity<User>()
    .HasMany(u => u.Roles)
    .WithMany(ur => ur.Users);

I also modified the User and Role entities:

public class User : Entity<Guid>
{
    public UserName? UserName { get; set; }
    public List<Role> Roles { get; set; } = [];

    public User() { }

    public User(Guid id, string userName)
    {
        Id = id;
        UserName = UserName.Of(userName);
    }

    public static User Create(Guid id, string userName)
    {
        return new User(id, userName);
    }
}

public class Role : Entity<Guid>
{
    public RoleName RoleName { get; set; } = default!;
    public List<User> Users { get; } = [];
    public Role() { }

    public Role(Guid id, string roleName)
    {
        Id = id;
        RoleName = RoleName.Of(roleName);
    }

    public static Role Create(Guid id, string roleName)
    {
        return new Role(id, roleName);
    }
}

After re-configuring the entities, I ran the query again, and voila! The user now returns the associated roles as expected. I'm not sure what happens with EFC 8 regarding entity identifiers of type ObjectValue, but it doesn't seem to handle them well. For now, I prefer to work with primitive data types for identifiers to avoid these issues. If this can help someone, great. Or, if anyone knows how to solve or address this, I'd love to hear about it. Cheers!

Made a small project, i will probably change it up a little bit but at its core it has JS syntax highlighting inside CDATA: https://github.com/Hrachkata/RCM-highlighter

Please find the link to the video for two sum: https://youtu.be/6PcYE1TQ54E

Thank you very much ptc-epassaro. As you mentioned Vuforia is not working in Holographic Remoting deployment. I deployed the app on the HoloLens and it is working now.

I'am struggling with this errror too, I'm encountering the exact same "Validate signature error" when attempting to broadcast TRON transactions in my TypeScript application. I've ensured that my owner address matches the private key and have carefully set all necessary transaction parameters. Have you found a solution to this permission-related signature issue? Any guidance or insights would be greatly appreciated!

In JavaScript, a simple for loop (like the one in your function) is synchronous. This means each iteration of the loop runs to completion before moving on to the next one, and the function doesn't reach the return statement until the loop has finished all its iterations. Why do you think it is returning before ending the for loop?

Read about binary files on the Wikipedia page: https://en.wikipedia.org/wiki/Binary_file

Much easier: Just type in HTML , that's all...

There are sample resolves published in the doc: https://docs.pdfsharp.net/PDFsharp/Topics/Fonts/Sample-Font-Resolvers.html

Is anyone familiar with a solution similar to the one demonstrated in this video?

https://youtu.be/slmy3bygaSk?si=A57kUKHVjOtlnhay

I get the same error when trying to drag and drop a file into visual studio. (this behaviour started when i upgraded to Version 17.11.3).

Whats weird, should i open the target folder using 'windows explorer' and directly drag n drop, thats works. Once i have done that, i thereafter successfully drag and drop files directly into visual studio 🤷‍♀️

Worked perfectly fine for me, thank you.

can you stop the command after a certain amount of seconds?

thx @t.m.adam, i managed to hack minecraft license verification with this

For the selectors you choose. That is not present in the code structure you presented. How were you able to come up with the selectors?

Did you ever find the reason this is happening? I am also trying to do the same thing for the same Coursera final project and am getting the exact same error!

You can try using three-dxf for rendering the dxf file: https://github.com/gdsestimating/three-dxf

hi i am working like same project i have to ask some things can you give me your telegram or email to chat ?

having the same problem, have you fixed it?

any solution for this ?

im exaclty on same problem

Please reference https://simplewebauthn.dev/docs/packages/browser

and you are good to go

hey hi hello howghhghghgghghghghghgh

I know it's been a few years since you posted this. But I'm having the same problem. Did you manage to solve it in any way?

Because sum should be equal zero

so....did it work?

Would be good to know...thanks.

the output of the program is 20

Move to latest version of NextJS and use the Github templates for deployment

i have the same problem with my code, you have another solution that can solve this error?

Same Error for me. please suggest what to do?

I disagree with the answer from @Rose. Getting the Messages[] it's ok.

multi-step deliveries Override _prepare_stock_move_vals not working. How to do that?

I have the same issue with my KMP project, the old code is loaded into the android emulator but the new code is loaded in the XCode iOS emulator. there is no single error in the application whatsoever.!

Changing the node version helped me

National Skills Development Authority is hosting such types of training.

NSDA adsbfgjks.bgjkbdfsjgbjfsbxcvjbxcnvbn,xcbv,xb,cnv 1

I have a class that I want to hide, this is my code:

    /*--------------------------------------------------------------
    Title & Breadcrumb
--------------------------------------------------------------*/
.main-title-section-wrapper {
    clear: both;
    float: left;
    margin: 0;
    padding: 75px 0 90px;
    width: 100%;
}

#header-wrapper .main-title-section-wrapper {
    position: relative;
}

#header-wrapper.header-top-absolute .main-title-section-wrapper {
    position: static;
}


.main-title-section {
    float: left;
    width: 100%;
    margin: 0;
    padding: 0;
    position: relative;
    pointer-events: none;
}



.main-title-section h1 {
    font-size: calc(var(--DTFontSize_H1)/.95);
    margin: 0 0 5px;
    word-break: break-all;
    font-weight: 700;
    text-transform: initial;
    line-height: 1.25em;
    color: #1a1a1a;
}



.breadcrumb {
    clear: both;
    float: left;
    width: 100%;
    margin: 0;
    padding: 0;
    font-size: inherit;
    font-weight: 500;
}

.breadcrumb span:not(.current) {
    display: inline-block;
    margin: 0px 12px;
    padding: 0;
}

.main-title-section-wrapper .breadcrumb-default-delimiter:before {
    content: "";
    background-color: currentColor;
    display: inline-block;
    height: 14px;
    opacity: 0.45;
    position: relative;
    top: -1px;
    vertical-align: middle;
    width: 1px;
    -webkit-transform: rotate(20deg);
    transform: rotate(20deg);
}

.main-title-section h1,
.breadcrumb {
    hyphens: auto;
    word-break: break-word;
    word-wrap: break-word;
    -moz-hyphens: auto;
    -webkit-hyphens: auto;
    -ms-hyphens: auto;
}

.main-title-section-wrapper>.main-title-section-bg,
.main-title-section-wrapper>.main-title-section-bg:after {
    content: "";
    height: 100% !important;
    overflow: hidden;
    position: absolute;
    top: 0;
    left: 0;
    width: 100%;
    z-index: -1;
    pointer-events: none;
}


/*--------------------------------------------------------------
    Default Colors
--------------------------------------------------------------*/

.breadcrumb {
    color: var(--DTBodyTxtColor);
}

.main-title-section h1 {
    color: var(--DTBlackColor);
}

.breadcrumb a {
    color: var(--DTLinkColor);
    border-bottom: 2px solid transparent;
}

.breadcrumb a:hover {
    border-bottom-color: var(--DTPrimaryColor);
}

.breadcrumb span.current {
    color: var(--DTBodyTxtColor);
}

.main-title-section-wrapper>.main-title-section-bg:after {
    background-color: rgba(var(--DTBlack_RGB), 0.05);
}

.main-title-section-wrapper.dark-bg-breadcrumb>.main-title-section-bg {
    background-color: var(--DTBlackColor);
}

.dark-bg-breadcrumb .main-title-section h1,
.dark-bg-breadcrumb .breadcrumb a,
.dark-bg-breadcrumb .breadcrumb span.current,
.dark-bg-breadcrumb .breadcrumb span:not(.current) {
    color: var(--DTWhiteColor);
}

.breadcrumb a:hover,
.dark-bg-breadcrumb .breadcrumb a:hover {
    color: var(--DTLinkHoverColor);
}



/*--------------------------------------------------------------
    Accents
--------------------------------------------------------------*/


/* Primary Color */

.breadcrumb a:hover {
    color: var(--DTPrimaryColor);
}


/*--------------------------------------------------------------
    Responsive
--------------------------------------------------------------*/

@media only screen and (min-width:1281px) {
    .main-title-section-wrapper {
        padding: 75px 0 90px;
    }
}

@media only screen and (max-width: 1280px) {
    .main-title-section-wrapper {
        padding: 45px 0 50px;
    }
}

/*----*****---- << Mobile (Landscape) >> ----*****----*/


/* Common Styles for the devices below 767px width */

@media only screen and (max-width: 767px) {
    .main-title-section h1 {
        font-size: 28px;
    }
    .main-title-section,
    .main-title-section h1,
    .breadcrumb {
        text-align: center;
    }
}


/* Common Styles for the devices below 479px width */

@media only screen and (max-width: 479px) {
    .main-title-section h1 {
        font-size: 24px;
    }
}

I'm trying to hide main title section wrapper, so far I used this:

    .main-title-section-wrapper {
    display: none ;
    visibility: hidden ;
    }
    
    .main-title-section-wrapper {
       position: absolute;
       top: -9999px;
       left: -9999px; }

And it works on chrome both on desktop that on mobile, but safari on ios still shows that class

What should I do to hide this element also in safari?

Can you please share your shortcode code ? the shortcode should have ob_start() & ob_get_clean() functions. please see the below shortcode syntax

function your_shortcode_function() {
    ob_start();
    ?>
    <div class="your-custom-shortcode-wrapper">
        <!-- Your output content here -->
    </div>
    <?php
    return ob_get_clean();
}
add_shortcode('your_shortcode', 'your_shortcode_function');

please let me know if it works

I was able to solve it by adding the mingw complier as the compiler in compile flags in the clangd config.yaml file.

Here is a the detailed medium post I made: https://medium.com/@adarshroy.formal/setting-up-neovim-on-windows-a-beginner-friendly-no-nonsense-guide-with-cpp-clangd-without-wsl-f792117466a0

Can you send me your modeling files to study? I'm currently studying this aspect, but I haven't found any relevant learning materials. Thank you. [email protected]

can you tell me how to install metaplex when i have only the old way available in a tutorial? You say its depricated - is this mean it wont work? i aim to create a fraqtuanized NFT with it. Sadly the code to install it with VSC is not working - only readme file in the zip file. I found this: https://github.com/metaplex-foundation/deprecated-clis so i want to ask if it will work for the installing of metaplex or not? I mean if its depricated isnt it means that it wont work ?

Also you say the new way is for candy machine - but i have no idea what is it - i just want to create a fraqtuanized solana nft - if its possible please clear my uncertainty and point me to the right direction. I am sorry if the question seems stupid to you - but i have been searching for it for about a week and havent found a good enough answer. May be i lack the nescessary skill to understand all - so any advice will be appriciated.

Please give me a pointer - you have my gratest gratitude.

Thank you all in advance for your understanding and helpfulness. Best wishes.

I have the same issue, I hope you solve it anyone can help

mongosh has to be installed using the instruction provided in the docs https://www.mongodb.com/docs/mongodb-shell/install/