I just added

gem "safe_yaml"

Boom!

I realised that they include the references in the response object. So by just using

result.final_output.references

I'll just add these to the model. This would however only give a list of citations used, not what was used for each metric

I think that you should not use the loop " for value in result" because you are inserting "values= result" in the last command i.e. "tree.insert". Using loop is making the same result get inserted in the table value (no of iterations) no of times.

So, after looking for alternatives for a while and checking the log for the publishing I found that before the final published files are moved to the Applications Files folder in the PublishUrl, the structure is replicated inside the PublishDir and deleted once moved to the final destination. Therefore, when doing any action during an "AfterTargets="Publish" target, if trying to act upon the .deploy files any command must point to the $(PublishDir)Application Files\... contents.

My final solution was something like the code shown bellow. The "replaces" are in place so that one can get the version-revision string in a "MyApp_X_X_X_X" format.

<Target Name="ExecuteSomething" AfterTargets="Publish" Condition="'$(Configuration)' == 'Release'">
    <Exec Command='"Path\To\Something.exe"; "$(ProjectDir)$(PublishDir)Application Files\$(AssemblyName)_$(ApplicationVersion.Replace(.,_).Replace(*,$(ApplicationRevision)))\MyApp.dll.config.deploy"'/> 
</Target>

Stripe does offer prorated charges through its usage-based billing and subscriptions features. If a user starts using your service in the middle of the month, you can set up prorated charges to ensure they only pay for the portion of the month they've used the service.

Also make sure your stripe does not blocking payments with their "FANCY AI RADAR" system .

If working on VS Code, and Windows, install Python 3.9 from Microsoft Store, open your terminal, make a Virtual Environment with "python3.9 -m venv myenv" and then install "pip install pyrealsense2".

Works perfectly.

It sounds like the issue you're facing with the slow performance on those two PCs might be due to low storage, outdated drivers, or some background processes that are using up resources. A good starting point would be to try Advanced System Optimizer or CCleaner to clean up disk space, update any outdated drivers, and optimize the system overall.

Also, I came across a review of a good PC optimizer that might help you. If you're interested, I’ve attached the link so you can check it out before using. Feel free to reach out if you need any help!

webView.navigationDelegate = self was missing in my viewDidLoad. Thanks to
lazarevzubov to ask the right question

Just to add an alternative solution to the one proposed by @austin-garrett of using RelayState. You can use a cookie with the data you want to track. Here more details: https://stackoverflow.com/a/70738120/16067905

احمد عمر علي معلوماتي وضحوا لي اياها لو سمحت.

mayb this repo can slove this problem. see: https://github.com/Emt-lin/react-native-svga-player

I have the same issue, but with forward and backward slashes in resultSet response/

For example, I expected to receive values "1\Ф" or "1/Ф", but after rs.getString() I had only "1Ф" value for both cases

I wrote some tentative solutions acoording to official resources to avoid this issue https://github.com/nagauta/day-one/tree/master/apps/react-csv

Thank you for your replies!

I tried applying the fix from the pull request [#670](https://github.com/ansible-collections/ansible.netcommon/pull/670), but unfortunately, it does not resolve the issue for me.

Changes Applied from the PR

I updated `netconf_config.py` with the proposed modifications:

```diff
- from ansible.module_utils._text import to_text
+ from ansible.module_utils._text import to_native, to_text

- confirm = module.params["confirm"]
+ confirm = to_text(module.params["confirm"], error="surrogate_or_strict")

However, I noticed that there is a typo in the to_text() call. The parameter should be errors, not error.

Even after fixing this, I get the following error:

'>' not supported between instances of 'str' and 'int'

Other Attempts

I also tried modifying the argument_spec to change the confirm parameter type:

Attempt 1: Changing type to "text"

confirm=dict(type="text", default="0")

Error:

argument 'confirm' is of type <class 'int'> and we were unable to convert to text: 'NoneType' object is not callable

Attempt 2: Changing type to "str"

confirm=dict(type="str", default="0")

Error:

'>' not supported between instances of 'str' and 'int'

At this point, I haven't found a working solution.

I have some Python knowledge, but I’m not an expert in Ansible module development, so I’m not sure where to go from here.
If anyone has insights on how to properly handle this, I would greatly appreciate the help! 🚀

I just created a separatee venv, activated it and ran both installation routines

pip install office365-REST-Python-Client
pip install office365

After running

pip list

this package list is shown:

Package                      Version
---------------------------- -----------
aenum                        3.1.15
appdirs                      1.4.4
APScheduler                  3.11.0
azure-core                   1.32.0
azure-storage-blob           12.25.0
beautifulsoup4               4.13.3
bs4                          0.0.2
case_conversion              2.1.0
certifi                      2025.1.31
cffi                         1.17.1
chardet                      5.2.0
charset-normalizer           3.4.1
clipboard                    0.0.4
colorama                     0.4.6
colour                       0.1.5
cryptography                 44.0.2
cursor                       1.3.5
decorator                    5.2.1
dill                         0.3.9
fuzzywuzzy                   0.18.0
gender-guesser               0.4.0
html_text                    0.7.0
idna                         3.10
imageio                      2.37.0
imageio-ffmpeg               0.6.0
infi.systray                 0.1.12.1
inflect                      7.5.0
isodate                      0.7.2
lxml                         5.3.1
lxml_html_clean              0.4.1
maybe-else                   0.2.1
mbstrdecoder                 1.1.4
more-itertools               10.6.0
moviepy                      2.1.2
msal                         1.32.0
msoffcrypto-tool             5.4.2
numpy                        2.2.4
o365                         2.1.0
office365                    0.3.15
Office365-REST-Python-Client 2.5.14
olefile                      0.47
pandas                       2.2.3
parsedatetime                2.6
pathmagic                    0.3.14
pillow                       10.4.0
pip                          25.0.1
prettierfier                 1.0.3
proglog                      0.1.10
pycparser                    2.22
pydub                        0.25.1
pyinstrument                 5.0.1
pyiotools                    0.3.18
PyJWT                        2.10.1
pymiscutils                  0.3.14
PyPDF2                       3.0.1
pyperclip                    1.9.0
PyQt5                        5.15.11
PyQt5-Qt5                    5.15.2
PyQt5_sip                    12.17.0
pysubtypes                   0.3.18
python-dateutil              2.9.0.post0
python-docx                  1.1.2
python-dotenv                1.0.1
pytz                         2025.1
readchar                     4.2.1
regex                        2024.11.6
requests                     2.32.3
Send2Trash                   1.8.3
setuptools                   58.1.0
simplejson                   3.20.1
six                          1.17.0
soupsieve                    2.6
tabulate                     0.9.0
tqdm                         4.67.1
typeguard                    4.4.2
typepy                       1.3.4
typing_extensions            4.12.2
tzdata                       2025.1
tzlocal                      5.3.1
urllib3                      2.3.0
XlsxWriter                   3.2.2

• Problem

Running of the import routine

from office365.sharepoint.client_context import ClientContext

is occuring this error:

from office365.sharepoint.client_context import ClientContext
ModuleNotFoundError: No module named 'office365'

So the mentioned method in this page is not running.

Does anyone do have a solution?

Just like Nils posted on the comment from @randomuser the possible solution could be to place the git plugin at the button after all the notes are generated.

Also, I added the git plugin as a dependency on my package.json

  "devDependencies": {
    "@semantic-release/changelog": "^6.0.3",
    "@semantic-release/git": "^10.0.1"
  }

This is because *ngIf="selectedId() is evaluated as FALSE when value is 0: https://developer.mozilla.org/en-US/docs/Glossary/Falsy

Something like:

<div *ngIf="selectedId()?.toString() as id">Current id: {{ id }}</div>

should do the trick. If you id is null, this will not show anything, but if is 0, it will be evaluate as true as this is a string.

Considering my issue is the same as
https://github.com/jOOQ/jOOQ/issues/14582
(and that issue was closed) , it boils down to a version problem. I'm using Postgres 15 and should not be using a Jooq version which only supports up to Postgres 14.

for linux/bash user: remove all release retentions from a pipeline

#!/bin/bash
PIPELINE_ID=${1}
PROJECT=<PROJECTNAME>
ORGANIZATION=<ORGANIZATIONNAME>
TOKEN="test:<TOKEN>"

leases=$(curl -u "${TOKEN}" -X "GET" "https://dev.azure.com/${ORGANIZATION}/${PROJECT}/_apis/build/retention/leases?api-version=6.0-preview.1&definitionId=${PIPELINE_ID}" | jq .value[].leaseId)
echo $leases
for lease in $leases; do
  echo $lease
  curl -u "${TOKEN}" -X "DELETE" "https://dev.azure.com/${ORGANIZATION}/${PROJECT}/_apis/build/retention/leases?ids=${lease}&api-version=6.0-preview.1"
done

The token can you create from the "User Settings" dropdown in the right top corner.
You can obtain the pipeline ids from the portal, something like this in the URL "_build?definitionId=42"

or use following command to get all names and ids from a project:

curl -u "${TOKEN}" -X "GET" "https://dev.azure.com/${ORGANIZATION}/${PROJECT}/_apis/build/definitions?api-version=3.2" | jq '.value[] | .id,.name'

The error occurs due to a mismatch in encryption settings between the client and server. To resolve it, update the server’s configuration file (firebird.conf) by setting WireCrypt = Disabled, then restart the server. Ensure the client-side settings match, and try removing wireCrypt if issues persist. Also, check for compatibility between the client and server versions. After making changes, restart both the database and application.

If Executable imports the entry point which executing the application (for example index.js), than the debugging is possible by:

node --inspect-brk node_modules/myutil/index.js [options]

Any options of myutil could be passed at [opiton] placeholder.

I had multiple startup projects in a clean architecture, ProjectA.API and ProjectA.UI. The project that handles DBContext is ProjectA.Infrastructure. I corrected this issue with the following steps:

1. Make the API project the only startup project since it interacts with the infrastructure layer alone.

2. Add Microsoft.EntityFrameworkCore.Design package to the API project and ensure that the version you are using is the same as Microsoft.EntityFrameworkCore.SqlServer in the infrastructure project.

In newest version of ruamel-yaml 0.18.10 . If i want to preserve backslash of multiple line string. How should i do.

I use code like below.

import pathlib
from ruamel.yaml import YAML

control_file = 'xx/nist_ocp4.yml'

yaml = YAML()
yaml.preserve_quotes = True
d = yaml.load(pathlib.Path(control_file))
yaml.dump(d, pathlib.Path(control_file))

Before running code:

controls:
- id: AC-1
  status: not applicable
  description: "The organization:\n a. Develops, documents, and disseminates to [Assignment:\
    \ or whenever a significant change occurs]"

After running code:

controls:
- id: AC-1
  status: not applicable
  description: "The organization:\n a. Develops, documents, and disseminates to [Assignment:
    or whenever a significant change occurs]"

https://chromewebstore.google.com/detail/open-link-in-small-window/oegnjpfejdnchenkkcajffjmpjolcfhj?hl=en

Open Link in Small Window chrome extension: Does not work well in MAC if the browser is on full screen.

I managed to get this to work a little differently, still using the Access DB Engine and some NETFX tools.

Instructions, a test file (a simple .rtf with one text line and an image) used in my tuning and my LibreOffice Basic project file

this solution means that this python project is created and managed by uv , so there should be had pyproject.toml in root dir.

so you can run uv sync to create a venv and install dependencies quickly.

uv sync: Sync the project's dependencies with the environment.

I am currently working on Azure Function Apps in a .NET 8 isolated environment. In this project, we are trying something new that I have never heard of before. Specifically, I am creating multiple Azure Function projects within a single solution. I successfully set this up, and it worked locally. However, after deploying to Azure, I encountered some errors.

One major issue is that the Timer Triggers I added are not appearing in the Function tab, where triggers are usually displayed. When I checked for errors, I found the following message:

No job functions found. Try making your job classes and methods public. If you're using binding extensions (e.g., Azure Storage, ServiceBus, Timers, etc.), make sure you've called the registration method for the extension(s) in your startup code (e.g., builder.AddAzureStorage(), builder.AddServiceBus(), builder.AddTimers(), etc.).

Regarding my deployment structure, inside the wwwroot folder, there are two subfolders, each containing its respective DLLs and host.json files. I modified my YAML configuration to copy host.json out of the subfolders so that it exists at the root level, alongside the two folders. However, host.json is still present inside each subfolder, meaning there are now three host.json files in total.

I have verified that my trigger functions are correctly implemented, but the issue persists. I am unsure how to proceed. Does anyone have experience with this or any guidance on resolving it?

Im facing the same problem but my code works my variable has the stt data but the terminal is filled with this error every time i use it after every while loop

I am working on the project of the chat board it's a financial chat board I got a task about the OCR my task is related to extract the data from the PDF of the bank statement(I want to give you example like what type want to extract let's suppose you had 50 transactions last month on bank statement in different areas like Uber like restaurant like grocery in this of categories so I want to abstract all the transactions in Jason from like this:""Deposits and Additions": [ { "date": "01/23", "details": { "company_name": "ORIG", "origin_id": "", "date_description": "CO Entr we havey", "name": "UNKNOWN", "id": "" }, "amount": "$344.27" },"", so I am using a different libraries so it will look like static their will some transaction will miss in the extraction data I don't want to miss any transaction how can I make my power more powerful by OCR please suggest me

Here is the scripted solution that I used to implement @Sridevi's answer:

$appname = "YourApplication"

### Connect to Graph (to get the service principal
Connect-MgGraph -ShowBanner:$false
$app = Get-MgServicePrincipal -Filter "displayname eq '$appname'"
Disconnect-MgGraph

### Verify there's exactly one app
$appcount = ($app | measure-object).count
if ($appcount -ne 1) {
   throw("$Found $appcount apps with displayname '$appname', this isn't right.")
}

### Connect to IPPS to set everything
Connect-IPPSSession -ShowBanner:$false

$sp = get-serviceprincipal -Identity $app.appid
if (($sp | Measure-Object).count -eq 0) {
    try {
      $sp = New-ServicePrincipal -AppId $app.appid -ObjectId $app.id -Displayname "$appname - Purge"
    } catch {
      throw("Can't generate service principal")
    }
}

$rolemember = Get-RoleGroupMember -Identity "eDiscoveryManager" | Where-Object { $_.exchangeObjectId -eq $app.id }
if (($rolemember | Measure-Object).count -eq 0) {
    Add-RoleGroupMember -Identity "eDiscoveryManager" -Member $app.id
}

$eadmin = Get-eDiscoveryCaseAdmin | Where-Object { $_.exchangeObjectId -eq $app.id }
if (($eadmin | Measure-Object).count -eq 0) {
    Add-eDiscoveryCaseAdmin -User $app.id
}

Disconnect-ExchangeOnline

I suspect one of the prime reasons to be the involvement of all the nested and otherwise invisible borders, I've ran into some similar problems in the past and a viable workaround for me is to use tools stronger in extracting text with positional information like pdfplumber. Extracting tables right away appears to be difficult in this case and having a two-fold approach of extracting (not tabular but still correct and well-spaced) text first and then some additional manual parsing on top via tools like regex or parse could be a good way forward.

I now have 2 working solutions, thanks to @rioV8 and @starball:

1. package.json - add the following contribution to the correct section:

"configurationDefaults": {
            "[ABC]": {
                "editor.minimap.markSectionHeaderRegex": " ... regex goes here ... "
            }
        }

2. activate() - Additional code within the extension:

const scope: vscode.ConfigurationScope = { languageId: "ABC" };
const inspect = vscode.workspace.getConfiguration("editor", scope).inspect("minimap.markSectionHeaderRegex");
if ( !inspect?.workspaceLanguageValue )
{
    vscode.workspace.getConfiguration("editor", scope).update("minimap.markSectionHeaderRegex", " ... regex goes here ... ", vscode.ConfigurationTarget.Workspace, true);
}

I went for solution 1. as it seems to be the cleaner solution for the extension I'm working on.

I have the same problem. Did you find a solution?

You need to iterate over the causes of the exception and print that out.

Something like this:

private String getMessage(Exception e) {
        var result = e.getMessage();
        var cause = e.getCause();
        var maxDepth = 3;
        while (cause != null && maxDepth-- > 0) {
            result = cause.getMessage();
            cause = cause.getCause();
        }
        return result;
    }

Replace the 3 with your own logic.

See my exceptionmapper here:

https://github.com/quarkiverse/quarkus-fluentjdbc/blob/main/examples/src/main/java/com/acme/fluentjdbc/config/ExceptionMapper.java

I found an article that explain the meaning of the new blocks-manifest.php file

This article

I guess there is presently a bug in the wordpress (or webpack) scripts, the npm start script remove blocks-manifest.php file from the build firectory.

In the meantime if you want to continue to work on your block until the bug is fixed, you can modify the main plugin file and register your blocks one by one in the old way like this:

function create_block_block_toto_block_init() {
    register_block_type( __DIR__ . '/build/toto1' );
    register_block_type( __DIR__ . '/build/toto2' );
}
add_action( 'init', 'create_block_block_toto_block_init' );

It will work, blocks-manifest.php will be ignored

If you are attempting to use an AMI from another region, this error happens. The current marked answer saved me a lot of time in figuring out what the root cause was for me.

if you are using a data source to lookup AMI's you will need to create a data source for each region you need to lookup AMIs. If you are using a static list from a table, you will need to make sure your lookup has the AMIs for all possible regions and factors in the region in the lookup.

Hopefully that will be helpful context for someone. I do not have the reputation to add comments to the current answer or I would have.

These plugins can help automate the conversion of Figma designs into React components with Tailwind classes:

1. Figma to Code (by Anima)

Anima is a powerful plugin that converts Figma designs into React code (JSX) with Tailwind CSS support. It generates responsive and pixel-perfect code, including spacing, typography, and layout.

2. Figma Tailwind

This plugin generates Tailwind CSS classes directly from Figma designs. It helps you quickly apply Tailwind utility classes to your components.

$password = 'JohnDoe';

$hashedPassword = Hash::make($password);

echo $hashedPassword; // $2y$10$jSAr/RwmjhwioDlJErOk9OQEO7huLz9O6Iuf/udyGbHPiTNuB3Iuy

MariaDB natively support VARBINARY: https://mariadb.com/kb/en/varbinary/

You would simply have to set the size value large enough to match your existing data (i.e. to cover for the 'max' provision).

Directly install from GitHub

pip install git+https://github.com/allenai/allennlp.git

This may also create a conflict with the numpy package, so downgrade them

pip install numpy<2.0.0

For me what worked was to use the right path when I was calling the web socket from the front. Something like "wss://a1d5-83-39-106-145.ngrok-free.app/ws/frontend". The "/ws/frontend is very important.

In my case, after updating XCode and the Simulator, I started encountering the error:

“Framework ‘Toast’ not found”

For me, the issue was resolved by downgrading the fluttertoast version from:

fluttertoast: ^8.2.12 → fluttertoast: 8.2.8

After changing the fluttertoast version to 8.2.8, the error disappeared, and the build was successful.

I’m not sure about sqflite, but you might want to give it a try.

Recruitment SOP

1. Purpose

The purpose is to establish a clear and consistent process for recruiting employees to ensure that the organization attracts, hires, and retains the best talent.

2. Scope

This SOP applies to all positions within the organization and covers all stages of the recruitment process, from job requisition to final offer acceptance & On boarding

3. Roles and Responsibilities

• AGM HR

  • Oversee the entire recruitment process.

  • Ensure that all recruitment activities are in compliance with legal and organizational standards.

  • Approve job requisitions and advertisements.

  • Ensure proper documentation and records are maintained.

• Hiring Manager:

  • Obtaining approval in MRF

  • Define job requirements, skills, and competencies.

  • Participate in the interview process.

  • Provide feedback and make final hiring decisions.

• Recruitment Team

  • Post job ads and handle initial screening of candidates.

  • Sourcing and screening of candidates.

  • Scheduling for Interviews.

  • Coordination with the Stakeholders for interview process

  • Evaluating the candidates.

  • Approval in Appointment Clearance form.

  • Issuing Offer letter to the new joining candidate

• Candidates:

  • Submit applications and required documentation as per the job posting.

  • Participate in interviews and assessments as scheduled.

4. Recruitment Process Steps

Step 1: Job Requisition

• The Hiring Manager submits a job requisition request to the HR department, which includes:

  • Job title

  • Job description

  • Required skills and qualifications

  • Salary range and benefits

  • Any other relevant details

Step 2: MRF Approvals

·         The Hiring manager or department head submits a formal request for new manpower or replacement of an existing employee.

Step 3: Job Advertisement

• The recruitment team creates and posts the job advertisement on relevant platforms (company website, job boards, social media, recruitment agencies, etc.).

• Ensure job postings are consistent, clear, and inclusive.

• Job postings should remain open for a specific period (e.g., 2-4 weeks).

Step 4: Resume Screening

• The recruitment team reviews the applications and shortlists candidates based on qualifications, experience, and skills.

• Ensure that candidates meet the basic job requirements before moving forward.

Step 4: Initial Interview

• The recruitment team conducts a preliminary phone or video interview to assess the candidate’s suitability for the role.

• Questions should focus on general qualifications, skills, and fit within the company culture.

Step 5: Assessment/Skill Tests (if applicable)

• Some positions may require candidates to complete skill assessments, coding tests, or personality evaluations.

• The Hiring Manager or HR team will coordinate these tests and evaluate the results.

Step 6: Final Interview

• A face-to-face or virtual interview with the Hiring Manager and Director

• Interviews should assess technical expertise, problem-solving skills, and cultural fit.

Step 6: Salary Fixation & Negotiation

• Salary Discussion: During the interview or offer stage, HR or the hiring manager discusses salary expectations with the candidate. Ensure clear communication about compensation components (base salary, bonuses, benefits, etc.).

• Negotiation Process: The candidate may propose a salary higher than initially offered. In this case, HR or the hiring manager must negotiate within the company’s pay structure and budgetary limits, considering the candidate’s expectations and the organization's constraints.

Step 7: Reference and Documentation Checks

• Conduct reference checks from previous employers to verify candidate experience and performance.

• Perform background checks (criminal, educational, and employment verification) as per the organization's policy.

Step 8: Appointment Clearance

• HR verifies that the candidate has met all internal requirements and procedures for appointment. This includes checking the completion of all documentation and background checks.

• The hiring manager confirms that the candidate meets the expectations and requirements for the role, including fit within the team and company culture.

• A signed approval on the proposal document from the Hiring Head and respective Director

Step 8: Job Offer

• Once a candidate is selected, the HR department prepares a job offer letter that includes:

  • Job title

  • Terms and conditions of employment

• The HR Manager and TA will discuss the offer with the selected candidate.

Step 9: Offer Acceptance and On boarding

• Once the candidate accepts the offer, HR prepares for on boarding:

  • Provide employment contract and any required documents.

  • Set up an orientation session to introduce the new hire to the company, its culture, and systems.

Step 9: Background Verification

·         Background verification is typically initiated after the candidate has successfully passed the interview process and has been selected for the role, but before the final appointment or offer letter is issued.

5. Documentation and Record-Keeping

• Ensure that all recruitment-related documentation (MRF, applications, interview notes, job offers, and background checks) is stored securely.

• Maintain a record of all job postings and the candidates who were interviewed, along with the final decision.

7. Continuous Improvement

• Regularly review and evaluate the recruitment process to ensure its effectiveness.

• Seek feedback from candidates and hiring managers to identify areas for improvement.

• Overall Recruitment TAT: Establish an overall recruitment process TAT target, such as 30–45 days from job requisition to candidate hiring.

8. Appendices

• Manpower Request Form

• Interview Evaluation Form

• Appointment Clearance Form

• Job Appointment Letter Template

I have explained all the steps with screenshots, see if it help

https://github.com/CMS365-PTY-LTD/EbaySharp?tab=readme-ov-file#access-and-security

My answer is not very scientific but in my case the reason was messing with the diagnostics options!

the uploaded image is currently working fine!

Firstly, thank you to @Alexander Zeitler. I am posting a complete example here of what worked for me. Alexander's code did not work for me out of the box as I had to adjust the form data to suit my purposes.

internal async Task PostIt()
{

    var username = "<Your username here>";
    
    var password = "<Your password here>";
    
    var baseAddress = new Uri("<Your POST Url here>");
    
    var cookieContainer = new CookieContainer();
    
    using (var handler = new HttpClientHandler() { CookieContainer = cookieContainer, AutomaticDecompression = DecompressionMethods.GZip | DecompressionMethods.Deflate })
    using (var client = new HttpClient(handler) { BaseAddress = baseAddress })
    {
        client.DefaultRequestHeaders.Add("accept-encoding", "deflate");
        client.DefaultRequestHeaders.Add("user-agent", "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/131.0.0.0 Safari/537.36");
        client.DefaultRequestHeaders.Add("Origin","<Origin URL here>");
        client.DefaultRequestHeaders.Referrer = new Uri("<Referrer URL here>");
        client.DefaultRequestHeaders.Add("connection", "keep-alive");
        client.Timeout = TimeSpan.FromMilliseconds(5000);
        // Add authorization headers here...
        var byteArray = new UTF8Encoding().GetBytes($"{username}:{password}");
        client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("Basic", Convert.ToBase64String(byteArray));
        
        /*
            Next comes the form data. I had to customize this to meet the requirements of the <baseAddress> server.
            
            Example: A Http debugger showed me when I was logging into <baseAddress>, the 'content' posted was as such:
            
            "login_username=<username here>&login_password=<password here>&redirect_url=<redirect URL here>&site=www"
            
            @Alexander Zeitler's code has thus been modified below.....
        
        */
    
        var formData = new List<KeyValuePair<string, string>>();
        formData.Add(new KeyValuePair<string, string>("login_username", username));
        formData.Add(new KeyValuePair<string, string>("login_password", password));
        formData.Add(new KeyValuePair<string, string>("redirect_url", "<redirect URL here>"));
        formData.Add(new KeyValuePair<string, string>("site", "www"));
    
        var request = new HttpRequestMessage(HttpMethod.Post, baseAddress);
    
        request.Content = new FormUrlEncodedContent(formData);
    
        var response = await client.SendAsync(request);
    
        if (response.IsSuccessStatusCode)
        {
        //do whatever........
        }
        else
        {
        
        }
    }
}

Have you seen this article about working with the soft keyboard input mode on Android in .NET MAUI? https://learn.microsoft.com/en-us/dotnet/maui/android/platform-specifics/soft-keyboard-input-mode?view=net-maui-9.0

Deploying with Azure CLI, I found that I got an the:

'The parameter WEBSITE_CONTENTSHARE has an invalid value.'

error because my function app --name flag had an underscore in it.

For anyone else with this error - try removing the underscores.

This Restrict Emoji Input and Enforce Character Length in Swift (with UITextField & UITextView)

https://dreamcooder.medium.com/how-to-restrict-emoji-input-and-enforce-character-length-in-swift-with-uitextfield-uitextview-0f584dfa2388

It is therefore possible to limit writes as mentioned above. However, it is still impossible to limit reads, especially on public data.

The solution I'm thinking of implementing is to create a NestJS API (or similar) that takes a Firebase Query as input and executes it.
This also requires taking into account real time reads with websockets and update/create/delete operation.

This is a real shame, as the promise of firebase is to dispense with the need for an API. But with this system, it could be easy to implement external tools like CloudFlare or Google Cloud Armor to protect against DDOS.

The solution isn't ideal, however; if a security rule made this possible, it would be better.

You can vote for this feature and post comments to ask the Firebase team to speed up development on it.

https://firebase.uservoice.com/forums/948424-general/suggestions/46561738-implement-rate-limiting-for-read-and-write-operati

I have same issue; I found that the read operation is blocked by Trellix Endpoint Security for Linux Threat Prevention (mfetpd).

....................... It's resolved now .......................

One thing you can do is combine the specs into a single "batch".

If you make a spec file called, for instance, home-about.spec.js that imports the home spec and about spec

import './home-page-test.spec.js'
import './about-page-test.spec.js'

The command yarn cypress run --spec cypress/e2e/home-about.spec.js produces the following results

That method might be a bit simplistic, depending on what your npm run home-page-test, npm run about-page-test, etc commands are doing.

It might be better to create a NodeJs script and running the Cypress API Module, where you can add various options and also process results and errors.

// e2e-run-tests.js
const cypress = require('cypress')

cypress
  .run({
    spec: [
      './cypress/e2e/home-page-test.spec.js',
      './cypress/e2e/about-page-test.spec.js',
    ]
  })

Run it with the command node e2e-run-tests.js

I also face the same issue ,it resolve when you have put the correct path in your config file for base :

• Incorrect : base: "/" Correct : base: "./"

 const viteConfig = {
  plugins: [react(), svgr()],
  base: "./", 
  server: {
    port: 3000,
    open: true,
  },
  build: {
    target: "esnext",
    outDir: "dist",
    sourcemap: true,
    rollupOptions: {
      output: {
        manualChunks: {
          vendor: ["react", "react-dom"],
        },
      },
    },
  },
};

According to the flink-kubernetes-operator documentation (See: https://nightlies.apache.org/flink/flink-kubernetes-operator-docs-main/docs/operations/configuration/)

With job.autoscaler.vertex.min-parallelism you can set the minimum parallelism of your pipeline.

Everyone! I'm new to the forum and would like to help, as I ran into the same issue. A picture is worth a thousand words, ergo...

I know this is old, but I basically use abstract as if I am telling Google what the article is about in 1 long descriptive sentence.

I have found the solution for my problem in the stackoverflow

<button mat-flat-button class="tertiary-button">Tertiary</button>

.tertiary-button {
  @include mat.button-color($light-theme, $color-variant: tertiary);
}

The issue I was having was due to having the Kestrel configuration in appsettings.json as well as program.cs. For some reason, it was adding another Kestrel (instance?) to the one already configured in the program.cs code. The Kestrel config and https cert loaded in program.cs had already been working with the same Dockerfile and compose.yml. I only noticed it when the same error got triggered at App.run in program.cs while previously it triggered at the certificate loading code also in program.cs

This actually works
navigator ap: https://jira/rest/zapi/latest/execution/navigator/{{execid}}?zql=fixVersion = 'API'
or

https://jira/rest/zapi/latest/execution/navigator/{{execid}}?zql=fixVersion = 'API'&offset=0&maxrecords=0&expand=executionStatus,checksteps&_=1416925447577

opengl在不同的显卡驱动下的版本的API与QT的适配性不是很好，目前来说Intel的显卡可能遇到一些问题使用QT6没问题，但是当切换到AMD的显卡时会导致Qt6Gui.dll发生崩溃，不同的控件可能对于opengl的版本要求也是不同的，

Apply CSS to Remove Margins and Set Height

html, body {
    margin: 0;
    padding: 0;
    height: 100%; 
    background-color: #1976d2; 
}

Add box-sizing for Consistency

{
    box-sizing: border-box;
}

html, body {
    margin: 0;
    padding: 0;
    height: 100%;
    background-color: #1976d2;
}

I only use it on vscode and have just started using it for less than a month. Is this your value-added fee related to the content of the following picture?

Copilot pro

bro use customer delimiter like these | to avoid any special character, if this works then tell here...

The problem has been solved (thanks to dai on discord). The issue is input_precision is tf32 by default for dot product, which has 10bits mantissa - leading to trailing digit loss. The problem was very pronounced with V = torch.arange(4096, 4096 + 2048, device = 'cuda', dtype = torch.float32), where the output was [6080., 6080., 6080., 6080., 6084., 6084., 6084., 6084., 6088.,...] . Switching to "ieee" input precision tl.dot(x,y, input_precision = "ieee") solved the issue.

in xcode 15.4 it's control + `

you can find the short cut in navigator tab

I'm also facing the same issue it was working earlier today.

How to Use Progressive web app in IOS

Facing same issue, I have checked the network access is allowed to all, added prisma generate in the postinstall script, runs fine in development mode but on build or on vercel deployment it's not getting responses from database

I have had luck with this modern (using TEXTJOIN and TEXTSPLIT) but basic Excel formula where RegexExtract, VBA, or SQL where not available or optimal alternatives.

If cell A1 contains a text string with a 10-digit phone number, this formula will look for the last occurrence of the number 10 billion, or smaller, and format it as a phone number with dashes.

=IFERROR(
  TEXT(
    LOOKUP(
      10^10 , MID(
        TEXTJOIN(
          "" , 1 , TEXTSPLIT(
            A1 , { "(" , ")" , "-" , " " , "." } , , 1
            )
          ),
        ROW(
          INDIRECT(
            "1:" & LEN(
              TEXTJOIN(
                "" , 1 , TEXTSPLIT(
                  A1 , { "(" , ")" , "-" , " " , "." } , , 1
                  )
                )
              )
            -9 )
          ),
        10 )
      +0 ),
    "???-???-????" ),
  "-" )

LOOKUP in the array syntax requires that the dataset be sorted. This wasn't a significant issue for my use case as the text strings that I ran through this formula typically contained only one 10-digit phone number.

The TEXTJOIN and TEXTSPLIT functions scrub all common phone number punctuation by converting the parentheses, dashes, and spaces into column separators, then rejoining the reduced string.

INDIRECT is used to determine the string length after all punctuation has been scrubbed. We subtract 9 from this length because a 10-digit string cannot start less than 10-characters from the end of the string. ROW provides MID with potential starting points for the 10-digit string within the full, scrubbed and re-joined text string.

TEXT formats the resultant string as a phone number with area code, segmented with hyphens.

Try

<style>
    .skiptranslate {
        display: none !important;
    }
</style>

A follow up question: Do you might possibly know the coordiantes of those mileposts in the original study from P. Vickery ?

The main issue is that you probably still want the user to wait for the result before they can take the next step. So you are trying to not freeze the UI while the user is waiting but at the same time you probably don't want the user to click on something else.

If the delay is minor you can disable the UI and possibly display a "please wait" message, make sure those visible changes take place and then call your function normally.

Your UI is not freezing because of CPU processing so you should not use Task.Run. You are waiting for I/O to complete so you should be using async IO operations. See link below.

https://learn.microsoft.com/en-us/dotnet/csharp/asynchronous-programming/async-scenarios

Bootstrap Grid System and many other responsive CSS frameworks used media query to detect the screen size. Media query is calculating the screen size based on its resolution, how much pixels available on the screen, not the actual size of the screen IRL.

If you are just downsizing the window without using the device toggle, you don't know exactly how much pixels are there in the window.

So what I suggest is to use the device toggle and adjust the pixel size based on your need if the device is not available in the option.

Did you solve that challenge to migrate to Watson? If no, please contact me:

+55 11 94581-7571 (Brazil)

UPLOAD KARTU TANDA PESERTA UTBK-SNBT 2025

SPM ULYA TARBIYATUL MUALLIMIN AL-ISLAMIYAH BAITUL QUR`AN CIRATA

[email protected] Switch account

Draft saved

The name, email, and photo associated with your Google account will be recorded when you upload files and submit this form

* Indicates required question

Nama Lengkap Santri*

Aqelania sofia yasir

Jenis Kelamin*

Perempuan

Lokasi UTBK Di Kartu Peserta*

UNIVERSITAS PENDIDIKAN INDONESIA - PURWAKARTA

Jadwal UTBK Di Kartu Peserta*

Date : 04-26-2025

Time : 12:30-16:15

Having issue WIth MultiTenant for each User with jwt in spring boot

i am also trying to create multitenant with jwt but i am having issues if anyone can help it would means alot

The solution was to add a log handler to the MLContext object as follows:

public void handler(object sender, LoggingEventArgs args)
{
    this.Invoke(() =>
    {
        textBoxLog.AppendText(args.Message.ToString()+"\\n");
    });
}

...

var mlContext = new MLContext();
textBoxLog.Text = "";
mlContext.Log += new EventHandler<Microsoft.ML.LoggingEventArgs>(handler);

...

var model = pipeline.Fit(data);

run

npm i @nestjs/core @nestjs/common @nestjs/platform-fastify

Lubab Ahmed

header 1	header 2
cell 1	cell 2
cell 3	cell 4

use Prettier extension to automate the indentations once save. less hassle in my opinion

Looks like you copied a line of code and didn't finish. Correct code should be this:

Dim numDaysLeft As Integer = Convert.ToString(reader("numDaysLeft"))

For a file (like .txt .db) use
adb shell rm sdcard/your_file.txt

For a directory use :
adb shell rm -r sdcard/your_directory_name

i observed 2 things.

1. in your Sub Page_Load , you are assigning value of 'EmpEmail' to 'numDaysLeft'.

2. you have only 2 arguments for String.format 'body', however your 'body' consume {0} and {2} . you should use {1} instead of {2} for the numDaysLeft.

applying this code in my mainactivity create mtehod() is very helpful to me and work perfectly thanks to simrkey for this help

bottomNavigationView.setOnApplyWindowInsetsListener(null)
bottomNavigationView.setPadding(0,0,0,0)

it's not working for me
https://stockonfire.com/product/honeywell-fsl100-sm21-swivel-mount-2/

i used all codes i found on internet and chatgpt with no change!

I already fixed this problem. It's due to my tables relationship between TimeRecord[Date] and Datetable[Date] (Many to one). This relationship cross-filter direction was "Single". So i managed relationship in the tables and change this to "Both-way". Then my table back to normal as i expected.

I've finally determined the issue, that is some library doesn't support for older chrome version and modern css syntax as well, as in this case is chrome 83 If you are struggling with the same problem, the first thing you do is to check where libraries that you've installed support the old version or not for example:
with antd => https://ant.design/docs/react/compatible-style with tanstack-query => https://tanstack.com/query/latest/docs/framework/react/installation

and css as well, in my case svh was be used in my css so it just only support for at least 108 version
=> i use "postcss-viewport-unit-fallback" to solve this so whenever using modern css you need to considering check "can i use" page to check this out

I am having the same issue. My paths are often non-standard in my projects. I thought that might be why I'm having this issue. So I did the following to be as simple as possible, and to let PyCharm choose what it wants for me.

I created an empty folder, then created a virtual environment (I use pyenv).

Then I ran pip install pytest-bdd

I opened this folder in PyCharm, set the project interpreter to the one in the virtual environment I created, and confirmed that pytest-bdd and its dependencies are installed. I have previously installed the JetBrains Gherkin plugin.

I then created a folder named features in which I added the following:

# some_feature.feature

Feature: Can run executable specifications
  As a developer
  I want to run a feature and/or scenario from this page
  So that I can demonstrate with confidence the system behaves as expected

  Scenario: A simple scenario
    Given I have a scenario
    When I click the play button in this file
    Then the step definitions are executed

I then moved my cursor to the Given clause, hit Alt+Enter, and selected "Create all step definitions". I accepted the defaults when prompted to "Create new step definition file". This created a file named some_feature.py as a peer to the .feature file itself (i.e. in the features folder.

I edited this file to look like this:

# some_feature.py

from pytest_bdd import scenario, given, when, then

@scenario('some_feature.feature', 'A simple scenario')
def test_some_feature():
    pass

@given("I have a scenario")
def step_impl():
    raise NotImplementedError(u'STEP: Given I have a scenario')


@when("I click the play button in this file")
def step_impl():
    raise NotImplementedError(u'STEP: When I click the play button in this file')


@then("the step definitions are executed")
def step_impl():
    raise NotImplementedError(u'STEP: Then the step definitions are executed')

Here is what I expected:

1. I can run the test by clicking the gutter "Play" icon beside the test_some_function() function in the .py file
2. I can run the test by clicking either the gutter "Play" icon that appears beside Feature: or beside Scenario: in the .feature file. (there is only one scenario so both should do the same in this case)

What I see is:

1. The test DOES run when I click "Play" in the .py file
2. The test DOES NOT run when I click either "Play" in the .feature file. Instead of the usual context menu in which I can select Run or Debug among other options, I get a context menu with one option only: "Nothing here"

What configuration detail am I missing to replace "Nothing here" with the ability to run the tests directly from the features file - as I can from WebStorm, even with exotic/complex paths?

select *, row Cum sum (fixedLengthArrayVector(av1, av2, av3)) as cav from t

First I had to build my code using go build. Only this was the program was able to recognize to recognize the mesa dll.

Second of all only the opengl32.dll file was needed from the mesa download. I put this next to the exe build. But when I run like this I get the error above.

To fix this I created a run.bat file and inserted the following code which worked.

@echo off
set MESA_LOADER_DRIVER_OVERRIDE=llvmpipe
set GALLIUM_DRIVER=llvmpipe
set MESA_GL_VERSION_OVERRIDE=4.5
set FYNE_RENDER=software
Main.exe
pause

I can confirm this happens when you accidentally bring up varying versions of elasticsearch with docker and then index things and then go back down a version.... it gets confused the only way to fix it is to purge the volumes with the data maybe (did not try) re-index the specific documents or something

Copy + Paste, then adjust the indentation.

well, if you meant that, you want to set your custom action view from your own module,
you can set it up yourself according to the user as follows:

1. Go to "Settings" app / module
2. On navbar, click "Users & Companies"
3. From the dropdown, click "Users"
4. Click the "Preferences" tab
5. Set the "Home Action" to the module relevant to you
(reference)

here in my example, I changed the initial home action to open Employees instead of Discuss (default):

Python313 bug:

Python3.13 All functions fail to send: IndentationError: unexpected indent https://github.com/microsoft/vscode-python/issues/24256

Use python 3.12

In seaborn 0.13.2, you can overwrite the col/row names after FacetGrid creation, then regenerate titles with set_titles.

import seaborn as sns

att = sns.load_dataset("attention")
g = sns.FacetGrid(att, col="subject", col_wrap=5, height=1.5)
g = g.map(plt.plot, "solutions", "score", marker=".")
g.col_names = ["just", "put", "anything", "you", "want", "here",
                "A", "B", "C", "D", "E", "F", "G", "H", "I" ,"J", "K", "L", "M", "N"]
# g.row_names = ["the", "same", "as", "above"]
g.set_titles(row_template="{row_name}", col_template="{col_name}")
plt.show()

We at Clavaa are looking into integrating our customer loyalty app with Google and apple wallet too. Is it possible to add in our payment wallet as another payment method?

In my case, I just removed a custom domain name that was forgotten in my Api Gateway, and after about 2 minutes I was able to delete the certificate.

Suhas C V's answer worked for me. Thank you