The spike at the beginning of your accuracy and loss curves is common and occurs because the network is adjusting its weights significantly during the early epochs. This happens when the model is "learning quickly" to minimize the loss and find the optimal weights. There are several reasons for this behavior. A high learning rate can cause rapid changes in weights, leading to unstable loss and accuracy in the initial stages. Random weight initialization also contributes to this, as the model starts from a random point and learns to find a good starting position during the first few updates. Additionally, using a small batch size can cause fluctuations due to the variance in gradients.

To address this issue, you can try a few strategies. Using a smaller learning rate or implementing a learning rate scheduler to gradually decrease it over the epochs can help. Applying advanced weight initialization techniques like Xavier or He initialization can provide a better starting point for training. Increasing the batch size can also stabilize gradient updates and reduce fluctuations. Finally, a warm-up strategy, where the learning rate starts small and gradually increases during the first few epochs, can smoothen the training process and reduce the initial spike.

let textToShare = "Some text"
let urlToShare = URL(string: "https://apple.com")!
    
let activityViewController = UIActivityViewController(activityItems: [textToShare, urlToShare], applicationActivities: nil)

present(activityViewController, animated: true)

I found a solution and posted here: https://stackoverflow.com/a/79332008/2163927

• Go to Google Cloud Console → IAM & Admin → Service Accounts

• Edit or Permissions then add the “Firebase Admin SDK Administrator Service Agent” or “Firebase Authentication Admin” role

Add $request->session()->regenerate(); in your login() method after Auth::login($user, true); to regenerate the session ID.

Auth::login($user, true);
    $request->session()->regenerate();  
    $request->session()->regenerateToken();

    Log::info('User logged in:', ['user' => $user]);

Problem solved, the name of device maybe(is) assigned after connected, so I shouldn't lookup for name.

To Implement a class extending SimpleBasePlayer and ensure

Packaging red boxes into blue boxes to optimize costs is challenging because it requires balancing size compatibility, material efficiency, and protection while minimizing waste and shipping expenses.

I think a lot of the arguments against building UI in HTML canvas are very naive and only consider a subset of use cases. Web apps and by extension, browsers, have evolved past just rendering text. And just because something was a bad idea before does not by default mean that it's still a bad idea.

If you're making a game using canvas (a common use case) then accessibility and SEO take a back seat. And complex animations, particles, performance etc. become more important.

My advice is to use native HTML and CSS unless there is something that cannot reasonably do using those tools. If so, then do that but understand what trade offs there are.

I'm capable of creating professional graphic designs including ✦Logo Designs, ✦Flyer Designs, ✦Business Cards, ✦Social Media Designs, ✦Stationery Designs, ✦Banner Designs, ✦Poster Designs, ✦YouTube Thumbnails, ✦Cover Designs, ✦Letterhead Designs, and ✦Packaging Designs. Feel free to reach out to me if you need any designs in these categories. I'm available 24/7, so you can message me anytime. Looking forward to working with you. Thank you! enter link description here enter link description hereenter image description here

If your shared directories stopped working after packaging your box, it’s likely related to how the shared folder configuration was handled during the packaging process. Here are some steps you can take to troubleshoot and resolve the issue:

Check the Configuration: Ensure the shared folders are correctly defined in your virtual machine's settings or configuration file (e.g., Vagrantfile for Vagrant). Sometimes, these settings don't carry over during packaging.

Reinstall Guest Additions/Tools: If you’re using VirtualBox or VMware, reinstall the Guest Additions or VMware Tools. These tools manage shared folder functionality and can sometimes get misconfigured after packaging.

Verify Permissions: Double-check that the shared directory on your host system has the correct permissions set to allow access.

Mount the Folders Manually: If automatic mounting doesn’t work, you might need to manually mount the shared directories within your virtual machine. Use the appropriate commands based on your virtualization platform.

Review Logs for Errors: Check the logs of your virtualization software for any errors related to shared folders. This can provide specific insights into what might be causing the issue.

Update or Reconfigure Software: Ensure that both the host and guest operating systems, as well as your virtualization software, are up to date. An outdated version could lead to compatibility issues.

If none of these steps work, you may need to revisit the packaging process to ensure the shared folder configuration was correctly set up before packaging. Let me know if you need more specific guidance!

try to change the command:

node dist/main.js

if you use Dockerfile to build, use

CMD ["node", "dist/main.js"]

The unnecessary changes in your GitHub Desktop related to bin/ and obj/ folders can be resolved by using a .gitignore file.

In the root directory of your MauiApp repository, create a new file named .gitignore (if it doesn’t already exist).

Add the following lines to the file to ignore the bin/ and obj/ directories: bin/ obj/

git add .gitignore

Then you can do git commit , followed by git push.

Be sure you are on a node version that is supported by the version of node-sass you are trying to use, shown here: https://www.npmjs.com/package/node-sass

Use nvm to manage or change node versions: https://github.com/nvm-sh/nvm

You can align your image to the center with the flex and justify-center operations.

<div className="flex justify-center">
  <img className="object-cover h-20 w-35" src="/sampa.png" alt='logo'/>          
</div>

Just close everything and restart your PC

cd android ./gradlew clean ./gradlew build

Same Issue when I trying do that on MacBook M1 Sequoia and VM with Sequoia too

https://www.instagram.com/rebecalopez4908?igsh=bTdmdjI3MGQxZTI3[enter link description here][1]

[1]: https://www.instagram.com/rebecalopez4908?igsh=bTdmdjI3MGQxZTI3... Rr

You can add in MigrationBuilder defaultValueSql = "GETUTCDATE()"

np.int, np.float etc appear to be deprecated. You only need to simply say int, float etc in the dtype specifier. That is, instead of dtype=(np.int, np.float), say dtype=(int, float) and so on.

In PostgreSQL, you can't directly enforce a limit on the number of rows a user can retrieve with a SELECT statement at the database permission level. However, you can achieve the desired behavior by using Row-Level Security (RLS) or by creating a security-definer function that restricts access.

For this error it is showing like the nope may not be available so, we need to start the kafka server first. command to start the server in windows: navigate to the kafka folder and open cmd prompt and enter the below command.

.\bin\windows\kafka-server-start.bat config\kraft\server.properties

[https://www.facebook.com/login/identify/?ctx=recover# 1]

1: https://send file to email

[Blockquote][2]

When the virtual keyword is applied to a method the whole class becomes abstract.

This is not true. You can have concrete (non-abstract) classes with virtual method(s).
Only if you have a pure virtual method the class becomes abstract.

Why is the virtual keyword applied to methods instead of classes

I believe one of the reasons is that in C++ is it common to have the principle of "pay only for what you use".
Virtual methods use dynamic binding for invoking and this has some overhead (typical implementations use a v-table which introduces an additional level of indirection).
If you don't need dynamic binding for a specific method - don't declare it virtual and it will be statically binded.

This applies even for abstract classes - if you have a non virtual method in an abstract class, then when you invoke it on a derived class the binding will be static and you won't pay the dynamic binding overhead.

More info about static and dynamic binding can be foudn here: Why do we need virtual functions in C++?.

Invalid kay hash. The key hash ********************* does not match any stored key hastes. Configure your app key hashes at https://developers.facebook.com/apps/****************/

If you're getting an error like this , just copy the key hash in the error and then ,

1. Go to your meta developer console .
2. Select your app .
3. Under the platform where you have previously added your key hashes ( ex : android ) paste the key hash and save it .

Then give it a try using your mobile device . It'll be working fine .

You can make use of MySql variables as so:

select max(date_entered) into @maxdate FROM reports;
SELECT report_id, computer_id, date_entered FROM reports WHERE date_entered=@maxdate;

Using $unset to remove old fields in MongoDB collections, we can reduce the size of the documents in the collection

db.collection.updateMany({}, { $unset: { oldField: "" , "unwantedField": "" } });

Issue is getting due to using same formSelector and ngSubmit directive. just keep them different. issue w

    <form (ngSubmit)="generateReport()" #generateBasicReport="ngForm"
      class="form-margin grid grid-cols-1 sm:grid-cols-2 gap-4">

      <div class="text-xs searchable-dropdown fleetiq-input-container">
        <label for="city" class="fleetiq-input-label text-xs z-1">City</label>
        <ng-select [items]="exporters" bindLabel="name" bindValue="exporter" [(ngModel)]="report_name"
          [searchable]="true" (change)="selectReportType($event)" [ngModelOptions]="{standalone: true}" appendTo="body"
          dropdownPosition="auto">
        </ng-select>
      </div>

      <button [disabled]="!generateBasicReport.form.valid" type="submit"
        class="w-full px-4 py-2 text-white bg-blue-500 hover:bg-blue-600 rounded-md">
        Generate Report
      </button>


    </form>

enter image description here

Please refer to the Microsoft documentation, which explains it very clearly.

https://learn.microsoft.com/en-us/visualstudio/modeling/code-generation-in-a-build-process?view=vs-2022&tabs=csharp

Add this configuration to the project file (Example.csproj):

<Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\v17.0\TextTemplating\Microsoft.TextTemplating.targets" />

<PropertyGroup>
    <TransformOnBuild>true</TransformOnBuild>
    <TransformOutOfDateOnly>false</TransformOutOfDateOnly>
</PropertyGroup>

better alternative is using react-native-svg library.

Consider upgrading your Windows version of Android Studio to the latest "Ladybug" release. After that, open the Android section of your Flutter project in a new window. Allow Android Studio to build your project. Once the build is complete, transfer your project to your Mac. Even if you encounter errors during building the project, having the Android part open in a separate window will provide you with more detailed error descriptions, making it easier to troubleshoot

otel client ( dotnet client as well ) doesn’t use exponential histograms so first of all drop native histogram feature flag from prometheus configuration. https://github.com/open-telemetry/opentelemetry-dotnet/blob/main/docs/metrics/customizing-the-sdk/README.md#configuring-the-aggregation-of-a-histogram

otel client sends explicit bucket histogram which can only be converted to classical prometheus histograms https://www.prometheus.io/docs/specs/native_histograms/#otlp

OTEL_METRIC_EXPORT_INTERVAL in otel client sdk is 60 sec by default while as garafna expects it to be 15 sec. We have two choices either set it to 15 sec in otel client as mentioned here https://prometheus.io/docs/guides/opentelemetry/ or change scrape interval to 60 sec in grafana as mentioned here https://grafana.com/blog/2020/09/28/new-in-grafana-7.2-__rate_interval-for-prometheus-rate-queries-that-just-work/

OMG ITS ME AGAIN WOOW, alright alright lets just hop in for the code, again the question is, we have images and we want to make a carousel like function, I hope stackoverflow will NOT delete my question.

MainPage.tsx

import "slick-carousel/slick/slick-theme.css";
import Slider from "react-slick";
import { useState } from "react";
import BolashakBook from "./books/bolashakBook";
import JournalBook from "./books/journalBook";
import MaslihatBook from "./books/maslihatBook";
import KogamDuirBook from "./books/kogamDauirBook";
import KazSpectre from "./books/kazSpectreBook";
import "./MainPage.css";

const MainPage = () => {
    const books = [
        <BolashakBook />,
        <JournalBook />,
        <KazSpectre />,
        <KogamDuirBook />,
        <MaslihatBook />
    ];

    const [currentIndex, setCurrentIndex] = useState<number>(0);

    const settings = {
        dots: true,
        infinite: true,
        speed: 500,
        slidesToShow: 3, 
        slidesToScroll: 1,
        centerMode: true,
        variableWidth: true,
        beforeChange: (_: number, next: number) => setCurrentIndex(next), // Сохраняем индекс центрального слайда
    };

    return (
        <div className="carousel-container">
            <Slider {...settings}>
                {books.map((book, index) => (
                    <div
                        key={index}
                        className={`carousel-slide ${
                            index === currentIndex ? "active" : "inactive"
                        }`}
                    >
                        {book}
                    </div>
                ))}
            </Slider>
        </div>
    );
};

export default MainPage;

MainPage.css

.carousel-container {
    width: 100%;
    height: auto;
    margin: 0 auto;
}

.carousel-slide {
    display: flex;
    /* justify-content: center; */
    align-items: center;
    padding: 10px;
    transition: transform 0.3s ease, opacity 0.3s ease;
    opacity: 0.6;
    transform: scale(0.8);
}

.carousel-slide.active {
    opacity: 1;
    transform: scale(1) translateY(-20px);
    z-index: 10;
}

.carousel-slide.inactive {
    opacity: 2;
    transform: scale(0.8);
}

.slick-prev:before, .slick-next:before {
    color: black;
}

.slick-next {
    top: 200px;
}

.slick-prev {
    top: 200px;
}

.slick-dots{
    top: 500px;
}

Let me explain this carousel-container (well its carousel container) carousel-slide (each slide means each book or each image) carousel-slide:active (the book in the middle which we consider as active, it will have less transparence) carousel-slide:inactive (those books or images that are not in the center, they will be smaller and have more transparance)
slick-next (button next) slick-prev (button previous) slick-dots (dots under the images)

What about MainPage.tsx well we use react-slick (librarie for react) which helps to make a carousel, we have settings you can check (https://react-slick.neostack.com/docs/get-started) its an official react-slick documentation. Is you have some advice you are welcome. If you think you can do better, please and welcome. In coding I love when someone tells me that im wrong, cause I learn more from critics. Thank you very much for the attention.

The new version of langchain_chroma will automatically perform persistence, so you don't need to execute: vectordb.persist().

I am able to reproduce the problem on command prompt, Python version 3.13.1.

As vimchun said, switch to version 3.12.X will solve the indentation problem.

After updating to Android Studio Ladybug | 2024.2.1 Patch 3, i have also face this problem After updating my kotlin = "1.9.0" to kotlin = "1.9.24" the issue was resolved for me i am using agp = "8.4.2" , gradle-8.6 and JDK-17

check the credentails and app info remove the local storage and cached some time cached are saved then this issue are persisted but ios build uninstalled not saved the credentails but please check the double crosss checking

It was accessibility plugin that was causing this issue.

more in this link https://cloudinary.com/documentation/react_image_transformations#image_accessibility

Ran this command in R-Studio. str(allPackage <- installed.packages(.Library, priority = "high")); allPackage [, c(1,3:5)]. created the list. Package Version Priority Depends
base "base" "4.3.2" "base" NA
boot "boot" "1.3-28.1" "recommended" "R (>= 3.0.0), graphics, stats"
class "class" "7.3-22" "recommended" "R (>= 3.0.0), stats, utils"
cluster "cluster" "2.1.4" "recommended" "R (>= 3.5.0)"
codetools "codetools" "0.2-19" "recommended" "R (>= 2.1)"
compiler "compiler" "4.3.2" "base" NA
datasets "datasets" "4.3.2" "base" NA

For those using S3StreamLogger, you must pass a region in the config.

Here (on page 3) you can find a better explanation, is from the STATA package but clears it out for the ADFuller Python package too: link

The null hypothesis is always if your data follows the regression you selected. Given that you can have a constant and drift, there are four possible combinations. (no constant and no drift, constant and no drift - what you selected, no constant but drift, constant and drift).

Shouldn't you pass size instead of deviceSize which is Pair<Float, Float>?

val strategy = ResolutionStrategy(size, 2)

An answer from 2025: You can install a Chrome extension called "Edit and Resend: Ajax Request Debugger in Chrome DevTools" , it looks working well and simulates the "Edit and resend" in Firefox.

Hope I am not too late to the party with this but I believe the reason that you ran into this issue was due to the "space" that you put in your character outputs. So to remove the indention you should just have to have the following in your couts (below):

"cout << "Please Enter Number of Coins:" << endl;" "cout << "# of Quarters:" << endl;"

You would need to apply to all your outputs to fix it.

https://developer.apple.com/documentation/technotes/tn3138-handling-app-store-receipt-signing-certificate-changes#Test-your-app-receipt-validation-in-the-sandbox-environment Test your app receipt validation in the sandbox environment Starting June 20, 2023, the sandbox environment produces app receipts that are signed using the SHA-256 intermediate certificate for apps running in iOS 16.6, tvOS 16.6, watchOS 9.6, and macOS 13.5. Follow these steps to test how your app handles the receipts。 If you test the in app purchase in the sandbox environment. If the result is successful, you should not deal with it.

Try setting a package name to your broadcast intent like:

val intent = Intent(TIMER_UPADATED)
time++
intent.putExtra(TIME_EXTRA, time)
intent.setPackage(packageName) // <-- add this line
sendBroadcast(intent)

I'm Facing same problem, implemented all the steps provided in the video and github repo but this is what i'm getting

Executing task: C/C++: gcc.exe build active file

Starting build... cmd /c chcp 65001>nul && C:\MinGW\bin\gcc.exe -fdiagnostics-color=always -g P:\cgm\graphics.h-project-template\Home\src\Hut.cpp -o P:\cgm\graphics.h-project-template\Home\src\Hut.exe C:\Users\nitin\AppData\Local\Temp\ccF2yzX2.o: In function main': P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:14: undefined reference to initgraph' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:15: undefined reference to getmaxx' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:16: undefined reference to getmaxy' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:17: undefined reference to cleardevice' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:18: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:19: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:20: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:21: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:22: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:23: undefined reference to circle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:24: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:25: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:26: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:27: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:28: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:29: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:30: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:31: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:32: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:34: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:35: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:36: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:37: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:38: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:39: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:40: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:41: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:42: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:43: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:44: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:45: undefined reference to ellipse' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:47: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:48: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:49: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:50: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:51: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:52: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:53: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:55: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:56: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:57: undefined reference to setfillstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:58: undefined reference to floodfill' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:60: undefined reference to setcolor' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:62: undefined reference to arc' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:64: undefined reference to setcolor' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:65: undefined reference to line' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:68: undefined reference to setcolor' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:69: undefined reference to settextstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:73: undefined reference to outtextxy' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:74: undefined reference to delay' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:75: undefined reference to setcolor' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:76: undefined reference to settextstyle' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:78: undefined reference to outtextxy' P:/cgm/graphics.h-project-template/Home/src/Hut.cpp:81: undefined reference to `closegraph' collect2.exe: error: ld returned 1 exit status

Build finished with error(s).

• The terminal process terminated with exit code: -1.
• Terminal will be reused by tasks, press any key to close it.

Sorry for late reply., Thanks so much for your replies., will try and see.,

A big thanks to RuthC above, she had the answer. The following is what I used.

df_cols = ['WC_015', 'WC_030', 'WC_046', 'WC_061', 'WC_076', 'WC_091', 
'WC_107', 'WC_122', 'WC_137', 'WC_152', 'WC_168', 'WC_183', 'WC_213', 
'WC_244', 'WC_274', 'WC_305', 'WC_366', 'WC_427', 'WC_488', 'WC_518']
fig, axs = plt.subplots(20, 1, figsize=(50,30))  #, sharex=True, sharey=True)  20

for k, col in enumerate(df_cols):
  df[col].plot(ax=axs[k]) 
  axs[k].annotate(df_cols[k], xy=(.01, .115), xycoords='axes fraction', fontsize=15, rotation=90, color='red')
    
fig.subplots_adjust(hspace=0)
plt.suptitle ('Volumetric Moisture Content', fontsize=40, y=.91)

plt.ylabel('Volumetric Moisture Content (m3/m3)', fontsize=30, y=10.0)
plt.xlabel('Date', fontsize=30)
plt.savefig('Moisture_Content_Plots.pdf', dpi=100, bbox_inches='tight')

Plot with subplots annotated

I have the same issue, and I'm using subscription_id not order_id when I clear the data like cookies and all from the browser and then try again then there is no error and I can do the payment in test mode.

Thanks to the comment of @topsail, I've found the issue. I opened the command palette and entered Developer: Toggle Keyboard Shortcuts Troubleshooting. It showed me that ctrl+x is invoking default:cut command. The File -> Preferences -> Keyboard Shortcuts listed its source as user. I removed that, and a cut command (all lowercase) again with source=user. Now ctrl+x invokes Cut (with capital C) which cuts the text correctly.

I'm not sure where those default:cut and cut commands came from. Maybe when I upgraded from a very old VSCode version? Because I wasn't using VSCode in a while, and just upgraded it.

View the solution here: use AWS_PROFILE in pandas.read_parquet, where you can supply a profile name from AWS config: ./aws/config and ./aws/credentials. Regarding IAM: s3:GetObject, s3:ListBucket, and then bucket/* for objects should do.

pd.read_parquet("s3://your_bucket",storage_options=dict(profile='your_profile_name'))

Put this code in functions.php file you iframe will work -

function allow_iframes_in_acf($allowed_tags) {
    $allowed_tags['iframe'] = [
        'src'             => true,
        'width'           => true,
        'height'          => true,
        'frameborder'     => true,
        'allowfullscreen' => true,
        'allow'           => true,
    ];
    return $allowed_tags;
}
add_filter('wp_kses_allowed_html', 'allow_iframes_in_acf', 10, 1);
 

https://code.visualstudio.com/docs/copilot/ai-powered-suggestions

If I understand your question correct the answer is probably under Inline suggestions

Hope it's helpful, Hisham

I want to thank some of the helpful comments.

I believe I have answers to most of the questions I had previously, and want to write a short summary here.

To map data stored in embedded pointers inside a struct/class such as

struct Dataset {
    int len = 0;
    float *data = nullptr;
    Dataset() {}
    Dataset(int len0, int *data0) {...}
} readonlydata, readwritedata;

the following omp pragma works on most compilers (gcc 11 to 14, clang 16+)

map(to: readonlydata) map(to: readonlydata.data[0:readonlydata.len]) \
map(tofrom: readwritedata) map(tofrom: readonlydata.data[0:readonlydata.len])

The data pointer must be separately mapped in order to pass those to the device.

this was mostly inspired by the "Deep-Copy" OpenACC example shared by Mat Colgrove

https://developer.download.nvidia.com/assets/pgi-legacy-support/Deep-Copy-Support-in-OpenACC_PGI.pdf

It appears that OpenMP also supports using variables as array length at runtime.

Based on the OpenMP 5.1 examples, another way to map such nested dynamic data is to use declare mapper(), which does not apply to individual variable, but applies to the struct type (typedef)

typedef struct Dataset dataset;
#pragma omp declare mapper(dataset ds) map(ds, ds.data[0:ds.len])

Unfortunately, it appears that declare mapper() clause is currently not supported in either gcc or nvc.

Now, regarding gcc, clang and nvc, the completeness and robustness of their OpenMP GPU offloading features are quite uneven and overall buggy.

Among these 3 compilers, nvc is the most robust and also offers the highest gpu speed after offloading. However, it is only supported on Linux. gcc/clang can build on Mac/Windows, but both produced slow/unoptimized binaries. gcc-12 is relatively the more stable one, but the binary is also quite slow. gcc-11 can build my code, but does not run properly on some GPUs; gcc-13/14 both can build, but won't run. I have found a number of regressions that were related to those error messages.

Some commonly seen gcc error messages when building nvptx with gcc-11 to 13

• if g++ reports a linking error that "undefined symbol sinf" or cosf or sincosf, it can be resolved by adding -foffload="-lm" in the linking command
• if g++ (on Ubuntu 22.04, but not 24.04) reports a linking error that x86_64-linux-gnu-accel-nvptx-none-gcc-13: fatal error: cannot read spec file ‘libgomp.spec’: No such file or directory this is a known gcc bug, one can link the /usr/lib/gcc/x86_64-linux-gnu/12/accel folder to gcc/13
• if g++ reports an error Value 'sm_30' is not defined for option 'gpu-name' this is because of the cuda version of your system, need to update to 12.x. Adding -foffload="-march=sm_35" won't help
• gcc-13 and gcc-14 has a known regression for handling nested dynamic arrays inside struct, see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113867, it produced an error libgomp: cuCtxSynchronize error: an illegal memory access was encountered libgomp: cuMemFree_v2 error: an illegal memory access was encountered libgomp: device finalization failed
• gcc-12 can produce valid nvptx binary, but the binary is really slow. there are two problems of gcc-12 produced nvptx binaries
  • in gcc-12/13, the total launched block number ignores user's num_teams() or OMP_NUM_THEAMES setting, and is capped to a small number, which is severely underutilizing the GPU hardware; I suspect that it is related to this fix (maybe a regression?): https://gcc.gnu.org/bugzilla/show_bug.cgi?id=109875
  • the produced kernel is unoptimized and uses too many registers. In my case, gcc uses 150+ registers compared to 60ish for nvc compiled binary.
• so far, I haven't been able to make gcc amdgcn offloading to work - gcc-12/13 can compile this binary, but it always gives libgomp: Offload data incompatible with GCN plugin (expected 3, received 2) libgomp: Cannot map target functions or variables (expected 1, have 4294967295) error when running.

as of now (Jan of 2025), gcc's GPU offloading is still quite buggy and unoptimized. nvc is the quicker solution to get the code to build and run.

Could you specify the function you're trying to implement?

For Charkra UI v2, ReactJS: set the property trapFocus of the modal contain CKEditor component:

<Modal trapFocus={false} ... />

will resolve the problem

Wrong import Import from @types/express instead npm i @types/express import: import express, { Request, Response} from "express"; this will fix it

We are facing the same issue with our component with jdk17, could you please share if you were able to resolve this.

One liner would be {new Date().getFullYear()} inside of jsx/tsx

Just adding setAlwaysShow(true) to LocationSettingsRequest, displays "To continue" instead of "For a better experience"

e.g.

val builder = LocationSettingsRequest.Builder()
    .addLocationRequest(locationRequest)
    .setAlwaysShow(true)

Thanks https://stackoverflow.com/a/56420194/22157294

While this doesn't directly address the question, I stand by the marked answer as Warp is indeed built on command shells.

However, I want to share a relevant finding for Warp users. For those looking to integrate Warp into their workspace more seamlessly, there's a built-in feature described at https://github.com/warpdotdev/Warp/issues/257#issuecomment-1175504092. This feature allows users to bring their Warp instance above all opened windows. Note that this feature is currently available only for macOS and Windows.

I decided to put this here because this question is the first result that appears in my Google search, I hope this is ok with everybody.

Kerberos only works if the client can get a "ticket" and the two main requirements for getting a ticket are:

• The user must be logged into the client device with their AD DS credentials
• The service account (the account IIS is running under in this case) must have a Service Principal Name (SPN) set that matches the URL used. The SPN is derived directly from the URL entered into the browser address bar. For example, if the URL was https://www.example.com/, the SPN would be HTTP/www.example.com.

However, the hostname "localhost", which appears to be what you're using in this case, is not a permitted SPN as it is not actually a DNS hostname (it is a name interpreted by your local OS). Similarly an IP address cannot have a corresponding SPN.

Short Answer: If you use "localhost" as the hostname, the client will not initiate Kerberos and fallback to NTLM.

PS: If you actually care about security, you MUST use HTTPS (even for Kerberos).

You can use this Twilio tutorial to get some ideas on how to solve your problem.

https://www.twilio.com/en-us/blog/voice-ai-assistant-openai-realtime-api-python

If anyone else is experiencing this, the issue turned out to be that the files were in a directory synced with iCloud. Moving the project folder to a non-synced directory and building there worked without issue, though I'm not sure why.

Right, try fetch it:

http://Host of test needed/path (if have)/index. php?title=Special:Version

If the response includes "MediaWiki" & "PHP" & "Lua", this site is prowered by MediaWiki.

Currently there's no other way to do this so i made a tool for it:

https://github.com/SalticHash/DataWinLoader

I think that the problem might come from your 'pipe' prefab. Notice how on the tutorial you're following, the pipes are made with three different parts: top, bottom, and middle.

The middle part is the one that naturally should have the PipeMiddleScript.cs script attached to it. This script needs a collider component to function correctly, but that collider must be attached to the same object as the script. Currently, it seems like your collider is attached to the parent object of the middle part, which is the pipe prefab itself.

To fix your bug, make sure that the middle part has both the collider2d component and the PipeMiddleScript.cs script.

Although this is an old post, I thought it might pay to leave the solution that I have implemented in case someone else trips over the problem like I have.

This seems to happen because the entity manager is not managed and therefore not closed. To get around it declare the entity manager into its own variable and then close it once done.

EntityManager entityManager = factory.createEntityManager();
List results2 = AuditReaderFactory.get(entityManager).createQuery()
        .forRevisionsOfEntityWithChanges( Customer.class, false )
        .add( AuditEntity.id().eq( 3014l ) )
        .getResultList();
entityManager.close();

You could use presignedURL to do that:

1. Send a request from client side to server side to generate presignedURL (server side will authenticate and process where the file will be placed,... )
2. After that, server will send back to client side a presignedURL with a timeout setting. Client side will use that URL to make a request to upload file directly into S3

You maybe ask about the file information (size, metadata,... ) You could get that information and send to server in the first request. It means you will send the file information in the request which send back the presignedURL. At that process, you could verify something such as:

• Is client side domain in your system?
• File type in the acceptance list?
• ... etc

Note:

• Maybe we would need to verify some properties in both client side and server
• If you uploaded many times with the same presignedURL. It would replace the old one
• Maybe you need another service to check the file content (in case end-user uploads sensitive file or something like that)

I hope my idea could help you

The above code using the string builder throws an exception when I tried it in PyCharm.

However, if I insert the statement, '@property' between screen and def build(self) it runs and returns a screen image. [! enter image description here]1

Use import.meta.client. Specifying the mode.

<script setup>

if(import.meta.client){
  window...
}

</script>

It works when enabling PUT/GET communication on PLC HW configuration

For future onlookers, I fixed this issue by adding in the attributes-type, attributes and alert fields as part of the aps dictionary.

It seemed redundant at first since all of those were part of my initial content-state field, but from this documentation, it seems this is necessary to specifically start a live activity

I notice that the OP is using a hiltviewmodel and the sample code from BenjyTec isn't. I've been having a similar problem and it seems to centre around using HILT.

I prefer to employ then if...then...elif...else... construct over logical connectives i.e.|| or &&, as the binding is tighter when employed in automated test frameworks - this is certainly true of BATS and do I wonder if it's also true of the wonder that is Shellspec? Do you observe the same errant/unwanted behaviour using a similar approach?

This support has already been added but has not yet been released. You can track the progress here: https://github.com/ballerina-platform/module-ballerinax-rabbitmq/pull/997.

I will update this thread once the feature becomes available.

I was trying to find better implementations for this topic, i do have it working, my issue is that, before mounted i get an error:

Firefox can’t establish a connection to the server at http://localhost:3000/api/redis?channel=ads_channel.

But it works fine anyways.

First: install npm i ioredis.

Second: Create an endpoint at your nuxt/server/api folder.

server/api/redis.ts

import Redis from "ioredis";

const redisClient = new Redis(6379);

redisClient.on("error", (err) => console.error("Redis Client Error",err));

export default defineEventHandler((e) => {
 e.node.res.writeHead(200, {
  "Cache-Control": "no-cache",
   Connection: "keep-alive",
  "Content-Type": "text/event-stream",
});

const { channel } = getQuery(e);

redisClient.subscribe(channel, (err, count) => {
if (err) {
  e.node.res.end(JSON.stringify({ error: err.message }));
  return;
}

redisClient.on("message", (channel, message) => {
  e.node.res.write(`data: ${message}\n\n`);
});

// e.node.res.setHeader("Content-Type", "text/event-stream");
// e.node.res.setHeader("Cache-Control", "no-cache");
// e.node.res.setHeader("Connection", "keep-alive");
});

  return true;
});

Third: Now in your component or page add this:

onMounted(() => {
  const connectEventSource = () => {
    const eventSource = new EventSource(`/api/redis?channel=your_channel_name`);
    eventSource.onmessage = (event) => {
      let parsed = JSON.parse(event.data);
      console.log(parsed);
    };

    eventSource.onerror = (error) => {
      console.error("EventSource failed:", error);
      eventSource.close();
      setTimeout(connectEventSource, 5000); // Retry connection after 5 seconds
    };
  };

  setTimeout(connectEventSource, 1000);
});

hello sir i am havingt he same problem. is a solution found?

It seems you accidentally left in some of the auto generated code in your source, so contentHandler is always being called immediately. It should work if you remove the first block of code calling it

  if let bestAttemptContent {
    contentHandler(bestAttemptContent) // REMOVE this if statement
  }

The following payload works!

const sharePointPayload = {
    "__metadata": { "type": "SP.Field" },
    "Title": columnName,
    "FieldTypeKind": 4,       // FieldTypeKind 4 corresponds to the Thumbnail column type
    "TypeAsString": "Thumbnail",
};

Update: I’ve found the issue.

server {
    listen 12345 ssl http2;
    server_name grpcgateway;
    default_type application/grpc;

    ssl_session_cache builtin:1000 shared:SSL:10m;
    ssl_session_timeout  5m;

    location / {
       grpc_set_header X-Forwarded-For $remote_addr;
       grpc_pass grpc://abc-server:12345;
    }
}

The grpc protocol here should be changed to grpcs:

grpc_pass grpcs://abc-server:12345;

If C language had the issue of memory allocation then why was that not resolved in c++. Like how come python or other similar languages do not have this issue but c/c++ has it.

How about this one?

int main(int argc, const char * argv[])
{
    Word word;
    Command cmd;
    cmd.grp = 2;
    word = *(Word*)&cmd;    // casting by pointer conversion
}

Will this approach publish workflows and notebooks into production exactly as they are in the development environment?

We don't have the definition of the functions Import-Job and Import-Notebook you mentioned in your code but if you're using the api's workspace/jobs and workspace/import it should work, as long as you handle updating an existing job.

And it'll publish the workflows and notebooks as they are defined in your repository / current branch.

Are there any best practices or recommendations for structuring the release pipeline?

Since you already have a DAB structure in your repository, and you deploy your notebooks and jobs at the same time, you can simply use curl to install the databricks cli and run a databricks bundle validate, the databricks bundle deploy, without needing to handle the creation of directories etc.

Documentation: Databricks asset bundles on databricks

You can integrate Azure Application Insights to your Spring Boot application: https://learn.microsoft.com/en-us/azure/azure-monitor/app/java-spring-boot?source=recommendations

All you need is a dependency, a line in main method of your application to initiate the agent and the configuration properties that point to your Application Insights.

With that done, the Application Insights agent will auto-collect logs from Log4j2 and send them to Azure Application Insights. From there you can set up alerts and have better control on your logs.

see https://support.microsoft.com/en-gb/topic/ndr-error-codes-550-5-7-703-550-5-7-705-550-5-7-708-and-550-5-7-750-f5675801-1846-4d1c-9599-5b4e26a9175d

This NDR is generated if you send an email message from an IP address that has a low reputation. The issue is more likely to affect new customers, such as those who have a Microsoft 365 trial subscription.

How do I fix this?

Only an email admin in your organization can fix this issue.

If you're an email admin, and you receive this error during a trial subscription, contact Microsoft Support to request an IP address exception until you assign Exchange Online licenses

.

Thanks to workingdog's suggestion, I tried using listRowInsets on the header text, which allowed me to adjust the vertical alignment of the header to match the rows. I also experimented with alignmentGuide, but I couldn't get it to work—perhaps I implemented it incorrectly.

The solution that worked for me was using listRowInsets to align the header with the left side of the rows. I adjusted the top and bottom edge insets by trial and error until the alignment looked the same as before. Here’s the code I used:

List {
    Section {
        Text("Row")
        Text("Row")
        Text("Row")
    } header: {
        Text("Header")
            // This is the fix
            .listRowInsets(EdgeInsets(top: 8, leading: 0, bottom: 11, trailing: 0)) 
    }
    .headerProminence(.increased)
}

Image of before and after.

This approach resolved the issue for me, and I hope it helps others facing the same problem.

There is a framework called Offline StoreKit 2 to handle StoreKit 2 in cases where there is no internet (offline) or airplane mode. It allows you to store requests to the App Store (Product.products and Transaction.currentEntitlements). Validated transactions are serialized in wrapper classes OfflineProduct and OfflineTransaction. They are stored in UserDefaults using AES.GCM encryption using a unique key. This prevents copying between devices or changing the content. When you go offline, the framework triggers a delegate that populates the wrapper classes for you to use temporarily offline. When you come back online, your app starts working normally again. The repository is: https://github.com/fborelli/OfflineStoreKit2.git

As a last resort, you could always try RTFM. This is what I did, and it turns out that emulators are not currently supported on ChromeOS. It's my fault of course, for not using a MacBook.

Check the Add the *.docker.internal names ... work for me enter image description here

My phone is being hacked and this application Form 7 appears its's here on my Google account [email protected] my name is Anthony Melendez I'm aware of this is here popping up on my phone I am not responsible for any type of fraud or any misconduct miss happs that maybe occurring so !!!!!stop if any business using my Google account [email protected] hacker snuffy Manuel quientero.

I'm not sure, but I think this may be a problem with werkzeug. I have several flask projects and I found that all works well with werkzeug 2.2.2 but when I upgraded to 3.1 I get this error.

I ended up setting FLASK DEBUG to 0. This allowed me to use the pycharm debugger. I do not get the error showing in the browser (but I can see them in the console anyway). The other downside is it stops the auto reloader so I need to re-start between code changes.

Solution was to place the .env.local config file in the project root directory, rather than under app/

Use fullchain.pem certificate, not cert.pem

New changes have been made to the way Minecraft handles identifiers and you will now need to replace new Identifier(...) with Identifier.of(...).

I found the necessary clues here: https://anvil.works/forum/t/adding-a-new-quill-format/9602

The blotname should correspond with the name of the feature being added to the toolbar, which can be added to the array in toolbarOptions. The clickable button can be found using document.querySelector("button.ql-blotname").

Something else to watch out for - if you still get this error after installing the cryptography and rsa python packages, try installing cffi if it doesn't get installed. For some reason, this dependency didn't get resolved in my Poetry project and this took me down a rabbit hole for a while.

console = "" def COUT(CoutString): global console console = console + f"{CoutString}\n"

with adoc.LockDocument(): with adoc.Database as db:

    with db.TransactionManager.StartTransaction() as tr:
        bt = tr.GetObject(db.BlockTableId, OpenMode.ForRead)
        btr = tr.GetObject(db.CurrentSpaceId, OpenMode.ForRead)
        
        for entity_id in btr:
            entity_def = tr.GetObject(entity_id, OpenMode.ForRead)
            a = entity_def.ExtensionDictionary
            b = tr.GetObject(a, OpenMode.ForRead)
            for i in b:
                COUT(tr.GetObject(i.Value, OpenMode.ForRead).Note)

Surely this will help somebody now... FYI I found this using reflection commands such as MyEntity.GetType().GetProperties()

I had "agent refused operation" issue with ed25519-sk and ecdsa-sk keys (using yubikey). After setting up with instructions here first ssh login was success but subsequent failed.

Adding IdentityAgent none to ~/.ssh/config or calling ssh command with -o IdentityAgent=none option fixed it. More here.

The error occurs because you're making requests directly to http://127.0.0.1:5000/api/cosplays. When making requests from your frontend to your backend, you should use relative URLs like /api/cosplays instead.

Example of correct usage:

// Instead of this:
axios.get('http://127.0.0.1:5000/api/cosplays')

// Do this:
axios.get('/api/cosplays')