Delete the existing public/storage and run: php artisan storage:link

I had to write a microservice at work issuing the API on a separate port and the prometheus metrics on a different port. I did exactly as you did. It's been running for five years now. So far I have not noticed any security problems.

There is one thing I didn't consider five years ago. If kubernetes closes POD then I should sweep before closing. And I'm not doing that. As a suggestion I would suggest looking at “Respond to Ctrl+C interrupt signals gracefully” by Mat Ryer.

To add an update since this was answered in 2015, from SAS9.4M5 this can be done in open code. https://blogs.sas.com/content/sasdummy/2018/07/05/if-then-else-sas-programs/

%if not(%symexist(g900_r)) %then %do; %let g900_r=0; %end;

You don't have to import debugLogger, instead you can set the debug property when creating the Uppy object.

new Uppy({debug: true})

This answers the question - thanks to @AngelFire

For me, I could use Tools > GitHub Copilot and then log out and log back in with a different account.

You may find the answer here. It seems that QT itself reacts to the timeout and calls abort() to close the connection. You therefore receive the OperationCanceledError error.

For me this worked

1. flutter pub cache clean
2. change the pubspec.yml sdk: ">=3.0.0 <=3.24.5"
3. url_launcher: ^6.3.1
4. cd ios
5. pod install (delete the lock file)
6. flutter run

This will cleanup any cache of old url_launcher and get new one i.e. 6.3.1 and it will work.

1.mysql yourdomain.com 3306 , check this to make sure port 3306 works. 2.Check if your firewall blocking access 3.check your mysql config is set to accept remote connections

CS0120 error means that you need an instance for a non-static member.

You created this instance on the line: controls = new Controls()

now use this instance like this:

    private void OnEnable()
    {
        controls.Enable(); // changed to lower-case controls
    }

    private static void OnDisable()
    {
        controls.Disable(); // changed to lower-case controls
    }

https://learn.microsoft.com/en-us/dotnet/csharp/language-reference/compiler-messages/cs0120

You need to adapt your code to something like this:

router.get('*', (req, res) => { ... });

In Express v5, * is used to match all routes, including the ones without a preceding /

As before, make sure the wildcard rout is defined last in the route definitions to avoid it overriding more specific routes.

I also always got the message "update available" pointing to the seemingly unusable zip file when starting VSCOde. Codium already was disabled. Now I disabled TabNine, as well and after that the message was not sown any more.

Locking the group is a great suggestion but you need to remember to do that for every project you open on VSCode. An alternative quick shortcut I use is

Ctrl+Alt+Left/Right

to move the opened file between groups. You can change the binding from Preferences: Open Keyboard Shortcuts as shown here

https://github.com/expressjs/expressjs.com/issues/1408 please refer to this GitHub issue. there they have mentioned a solution for this issue.

There is a thread about that here: https://github.com/spring-projects/spring-boot/issues/27360

You could also do this specific test with MockMvc.

you can try to create a alarmband table like below.

then create a measure

MEASURE =
VAR _total =
    SUM ( 'customer alarm'[CountofAlarm] )
RETURN
    IF (
        _total >= MAX ( AlarmBands[left] )
            && _total <= MAX ( AlarmBands[right] ),
        _total,
        0
    )

I got same problem when publish image for rhel runtime:

dotnet publish -r rhel.8-x64

problem was solved then I change runtime to linux:

dotnet publish -r linux-x64

Create a program that returs the first equal string from a string array The array size can be customizable or static The user should input all the elements of the array using any repitition structure The system then ask the user to provide the search term if an equal string from the array is found is should display the string and its index if theres nothing found you may or may not display a message

Java

Peter solution didn't worked here but with a little tweak it worked:

func tabBarController(_ tabBarController: UITabBarController, didSelect viewController: UIViewController) { UIView.setAnimationsEnabled(false) }

When you cannot logon to the server with SSMS, there is no question of reaching the properties, so that is my problem.

It's probably because of SQL. Make the server side work faster, reduce the time of the queries you make.

Did you find any information about your question? How can I contact you?

I also need to use Fama-MacBeth procedure in my thesis.

Maybe there ist somebody out there, who cant test this code on a suhosin hardened PHP (>=7) with disabled eval and comment on it's usability:

try {$evalworks = false;eval('$evalworks = true;');} catch (\Throwable $e) {}
if(!$evalworks){
  echo "Eval is not available.";
}

Thanks to Fedi's response I was able to more deeply understand the requirement to have a region in boto3 presign requests. I ended up assertaining the closest region by latency via a ping check against all the regions I am using based on this example.

Once the closest of my regions has been ascertained (basically the first to return a 200) that is set for the duration of the session and the region and bucket name for that selection is passed in the header of each request made to the server.

I can then use the Flask request.headers.get() method to get the headers, and inject them into the boto3 pre-signing request. The URL returned to the browser is now correctly referencing the user's closest regional S3 bucket.

bonjour,Firebase est rachetée par Google en octobre 2014 et appartient aujourd'hui à la maison mère de Google, Alphabet. En 2020 , il est estimé que le service est utilisé par 30 % des applications du magasin Google play

Thanks to @browsermator indications I managed to make the navigator handle the download.

The main problem was authentication, which I bypassed with a token to allow the user on next download.

For the POST, I generate a form like this:

<form ngNoForm action="{{baseUrl + 'WorkingList/DownloadWorkingList/' +createFileTree + '/'+ createMetadata + '/' + token}}" method="post">
  <input *ngFor="let imageId of workingList.imageIds; let index = index" type="hidden" name="imageIds[]" [(ngModel)]="workingList.imageIds[index]"/>
  <button type="submit" class="btn btn-primary" rippleEffect>
    {{ "DOWNLOAD_MODAL.CONFIRM" | translate }}
  </button>
</form>

For the GET (not part of the question), I generate a URL the same way as the Form submit url, just adding the workingList Id as parameter.

Server side I added a check on the token added in the query url, and added [FromForm] on the object parameter.

This allow the navigator to handle the response as a file download and let him handle resources.

This is probably not the best (authentication is by passed, and user auth has to be handled manually) but it solved my problem and we can deal with this authorization method.

PS: I did not use the File() method in the controller because it close the stream too soon for the archive to be build

I know a little late to the races, but will add this anyways.

You'd want to create a Global Secondary Index. This will allow you to do queries based off of any item attribute.

Scans do not scale well, and as your table grows...it will greatly increase your back end's fetch time as it goes through every record.

GSI's create a secondary 'lookup table' which operates much faster. The link below will get you started.

https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GSI.html

Try to disable security check like here: https://stackoverflow.com/a/61498317/3730077

chromePrefs.put("safebrowsing.enabled", "false");
...
options.addArguments("disable-popup-blocking");

If it is only reading, it should be possible, assuming you have the lucene-backwards-codecs in your classpath.

Directory directory = FSDirectory.open(Paths.get(INDEX_PATH));
IndexCommit commit = DirectoryReader.listCommits(directory).getLast();
DirectoryReader reader = DirectoryReader.open(commit, 0, null);

The 0 is the minimum major version to check against. It is better to know which version of Lucene made the index and use that, but 0 is a catch-all.

If things have changed too much, there isn't a guarantee that you can read the index. Lucene only officially supports N-1 codecs, but this method is specifically for this case. Annoyingly, there isn't an IndexWriter equivalent to lazily reading in the very old and writing in the new.

https://lucene.apache.org/core/10_0_0/core/org/apache/lucene/index/DirectoryReader.html#listCommits(org.apache.lucene.store.Directory)

https://lucene.apache.org/core/10_0_0/core/org/apache/lucene/index/DirectoryReader.html#open(org.apache.lucene.index.IndexCommit,int,java.util.Comparator)

Do you have any idea how we can refresh the table partition by powershell ?

This was a bug in v4.0.0 of ApexCharts.

Please upgrade to [email protected] which should fix this.

one of the reason could memory issues. i recently faced this and i have to mouth the data onto external hard disk to have enough memory to container.

this error definitely mean docker is corrupted and needs to be reinstalled. and make sure users/{userName}/appData/Local/Docker folder is removed completely

Your function cmd_start just cannot be handled because when your bot started polling, the cmd_start wasn't declared. You should place the cmd_start before you run the main function. You should have the code like this at least:

import logging
import asyncio
from aiogram.types import Message, FSInputFile
from aiogram.filters import CommandStart
from aiogram import Bot, Dispatcher


bot = Bot(token="79127??????????????????fXTNyc")
dp = Dispatcher()


logo_photo = FSInputFile('212649.png')

# the function is declared before entering the main working loop
@dp.message(CommandStart())
async def cmd_start(message: Message):
    await message.answer_photo(photo=logo_photo, caption='текст')

async def main():
    await dp.start_polling(bot)

# all handlers are declared and now you can run the bot
if __name__ == '__main__':
    logging.basicConfig(level=logging.INFO)
    asyncio.run(main())

import pstats stats = pstats.Stats('profile_output.pstats') stats.print_stats(10)

I cant install redis from pecl in 2024, now its work > php7.4, i have 7.3 But i cant searching easy way for install, but it is very close

pecl install redis-6.0.2 works for 7.3

Golf No. : Click here to enter text. Report No. : Click here to enter text. Received Date: Click here to enter a date. Report Date: Click here to enter a date.

A Rails discord server pointed me to this...

https://github.com/rails/tailwindcss-rails/discussions/355

It's not supported at present so will need to work around it for now.

Rather than creating custom admin for this , why not you just create 2 views , where in view 1-> you insert object and view2 ->you copy object

Did you find any Solution? I have the same problem using dbt-glue. Thanks

For Visual Studio 2022

Go to Tools >> Options >> Text Editor >> General and deselect the 'View White Space' checkbox

Both options are valid and have their pros and cons!

Running your tests on local browsers is indeed faster and is often enough for small projects. In general, it's a good idea to use local browsers if you have very few browsers to run tests on, no visual checks and don't need to run tens of tests in parallel.

Remote browser grid offers the following advantages:

• Consistency when performing visual checks. This is a big deal, because screenshots of a page will be different in different environments even if you use the exact same browser. Even things like whether your laptop is connected to power or not may produce diffs in visual checks. In remote grid, all these risks are gone.
• Wide variety of browsers, versions, you can test on dozens of different environments if you want (for example, testing on real iOS or Android devices)
• You don't need to spend time downloading & installing browsers in CI (although you can solve this with local browsers too just by packing them into your docker image)
• You have zero hardware impact regardless of how many different browsers you want

There's also a third option — using local docker containers with browsers. This option solves such issues as visual checks inconsistencies while still being fast (network-wise) and local.

To sum up, I think it's a good idea to start off with local browser and as your project grows and your tests become more complex, switch to browsers in docker images and eventually remote grid. Plus, you can always use remote grid in you CI tasks while keeping local browsers for development.

To switch to remote grid you just need to pass gridUrl parameter in testplane config.

In Kotlin I created a function to check if keyboard is shown.

fun hideKeyboard() {
        val shownKeyboard = driver.executeScript("mobile: isKeyboardShown")
        if (shownKeyboard.equals(true)) {
            driver.executeScript("mobile: hideKeyboard")
        }
}

Can you please re-verify the API route group on RouteServiceProvider, and run below command

php artisan optimize:clear

It's because ChatGPT is wrapping the whole Markdown code into a codeblocks using ```, so the closing ``` in the code close the outer codeblock. To prevent this, you can ask ChatGPT to wrap the Markdown code into ~~~ instead, this will make a codeblock, but since it starts with a different "tag" than those in it, it won't break the rendering.

S -> SS | aSb ∣ bSa ∣ a

Can this be a solution as well?

The problem here was that I was only returning a subset of the pages in the full API response.

By running the complete script and including all pages the custom schemas were eventually returned.

I've always just used a product called Document Extractor literally all it does is transfer whatever files are stored in Salesforce over to an empty SharePoint site that my company isn't using.

It still shows everything mostly as if it wasn't there in the Salesforce UI, it's great.

Since the previous answer using URL.format() is deprecated, here's a simple way to achieve the same thing:

app.get('/old-endpoint', function (req, res) {
    const requestData = new URLSearchParams(req.query);
    res.redirect('/new-endpoint?'+requestData.toString());
});

Have you tried to pull the remote repository first and fix the merge conflicts - if exists- first? After you do it try to push ur changes again & u can also try it with git push -f to force push to the branch

i am also facing same issue

Please help if any solution worked

I am also having same error.

Context: I'm using gitlab's MlFlow server to log and register artifact. Everything that I'm logging/saving is correctly reflecting in gitlab, however, for some reason I'm getting the mflow.exceptions.RestException. I'm using torchrun to start the trainer class and there are hook registered which are executed before and after the each epoch/iteration. All-in-all it's not bothering the workflow but it'll be nice to know why I'm getting this error so I can handle it better rather than ignoring it.

Error Image here

You can also see the code for logging in one of the hook class below:

Code that integrates MlFlow into training

This error can also appear when you select the page number to be printed, to an unavailable page number by mistake.

Focus on this lines:

res (d/transact conn [{:user/id user-id
                       :user/email email
                       :user/verification-token token}])
db-after (d/db conn)

d/transact returns a "future". The transaction is not completed yet Calling d/db immediately after d/transact, it will get a db before the transaction. To fix that:

1. Add a deref to the transaction @(d/transact ...
2. Get your db-after from the result of the transaction {:keys [db-after]} @(d/transact

Also a few tips:

• Functions that query, like check-schema, should receive a db, not a conn.
• it is possible to call (d/pull db '[*] :user/id) do pull the schema
• Please clarify if you are using datomic.client.api or datomic.api. The com.datomic/local dependency provides the datomic.client.api. The client API uses this transact syntax: (d/transact conn {:tx-data [....]})

you need to use trigonometry to find the offset distance along the chamfer angle from the contact point, then add that offset to the contact point coordinates to determine the TCP, taking into account the chamfer angle and the cutter geometry

I was able to install the polars library using this command pip install polars.

For reference in case someone else is experiencing similar "issues", if a path is provided when running pint, all excludes inside the pint.json file will be ignored. Therefore with the above example, if vendor/bin/pint is run on its own, bootstrap/cache will be ignored.

Reference: https://github.com/PHP-CS-Fixer/PHP-CS-Fixer/issues/2956#issuecomment-319713451

I found this exception on google play console and it had more information. the problem was with webview and I had to implement onRenderProcessGone callback in WebViewClient to handle crash.

You probably have a typo in your requirements.txt The error message indicate 'langchain_openai' (underscore), wherease it should be 'langchain-openai (dash)

QuantizeWrapperV2 quantizes the weights and activations of the keras layer it wraps. This involves converting high-precision weights and activations to lower precision formats. When you apply QAT, the layers are modified to support quantization during training and this results in slightly increasing the number of parameters to manage the quantization process. To learn more about it, please refer this document.

This same cause is supporting now? If so anyone guide me to this.

Could you install Seq on both servers and configure your application to log to both?

Seq has scale out / high-availability mode on the road map but that is not yet available, and when it is available will be a leader-follower architecture requiring a load balancer.

Formula in C2:

=IF(MAP(A2:A8,B2:B8,LAMBDA(x,y,MAXIFS(B2:B8,A2:A8,x)=y)),"New","Old")

Srichakra PEB’s expertise in crafting premium steel structures for warehouses, ensuring durability and longevity.Our team specializes in tailoring warehouse designs to meet your specific requirements, ensuring optimal functionality and efficiency.With Srichakra PEB, enjoy cost-effective solutions without compromising on quality, maximizing your return on investment.Our pre-engineered building (PEB) technology allows for faster construction times, getting your warehouse up and running in no time. Rest assured, our steel structures are built to withstand harsh environmental conditions, ensuring the long-term integrity of your warehouse. https://srichakrapeb.com/warehouse-construction-2/

I have solved all of these issues on my stm32 and have implemented working functionality of DMA SPI RX and TX for this as well as a bit bang method for doing all of this. Both work very well.

This is my project link: https://github.com/Rokasbarasa1/Logger

I think the error is in the way you are using useState. Could you show me a piece of your code, where you declare your variable and where you assign the value? Have you tried to debug the value with maybe an alert()?

Android Studio is just a big piece of junk.

I too faced the similar kind of issue, any solution is appreciated

I try and I have this answer :

SyntaxError: homefs/src/main.js: Identifier 'i18n' has already been declared. (22:6)

  20 |
  21 | import createI18n from "./i18n";
  22 | const i18n = createI18n();
     |       ^
  23 |

Deleting node_modules and package-lock from the application, then clearing cache before installation of modules fixed my problem.

If you want to get each value separately then you need too use rockdb Column Families

add this code tabBarHideOnKeyboard: true, in
<Tab.Navigator initialRouteName={DashboardName} screenOptions={({ route }) => ({ tabBarActiveTintColor: "#3a98cf", tabBarInactiveTintColor: "#fff", tabBarHideOnKeyboard: true, />

Sir, your name and type fields have different formats pls check with docs if that is right

Instead of localstorage, you can store current page in URL query params, which is common and best practice to handle those kind of caching. Base on URL query params, you can easily retreive values like currentHeadingId or currentSubHeadingId. https://v5.reactrouter.com/web/example/query-parameters

How to get parameter value from query string?

I think you could make the process faster by skipping the conversion to a DataFrame and directly writing the data into a CSV file. This could look something like this:

with open(output_path, "w") as f:
    f.write("date,EH\n")
    for i in range(precip_1205500_439500.date.size):
        f.write(f"{precip_1205500_439500.date[i]:f},{precip_1205500_439500.EH[i]:f}\n")

You mentioned that you want to do this for every location, so I assume you will loop over all locations. In this case, you might want to switch to index-based selecting (using isel or square brackets instead of sel) for even more speed.

I hope this helps to speed up your data extraction.

Cheers, Markus

export_options should be inside the gym call, like this:

 gym(
    export_options: {
      generateAppStoreInformation: true
    }
  )

I got this same error message in a really stupid way. I wrote:

Table(name=name, metadata=metadata, *columns)

When I should have written:

Table(name, metadata, *columns)

I'm using Vitest and Vue Test Utils and got it mocked successfully. In a test-helpers.ts export this function:

export function mockCreateObjectUrl() {
    const createObjectURLMock = vi.fn().mockImplementation((file: File) => {
        return file.name
    })
    Reflect.deleteProperty(global.window.URL, 'createObjectURL')
    window.URL.createObjectURL = createObjectURLMock
}

Then import that function in your spec.ts file and call it before the first describe:

mockCreateObjectUrl()

The key lies in using Reflect to delete the function first before replacing it. IDK, where I got it from years ago. Probably from somewhere here on stackoverflow.

Just use firefox.............................................

Anyway, there is an i2c splitter device.

I wrote the code in C# using SCardTransmit and the commands you mentioned, first loading the key and then authenticating for the block I wanted to read or write.

I am attaching some screenshots of my code in case they help you form the commands.

To load Key:

loadKey

To Authentication:

Authentication

you just have to add box with github domain to open any public github repository on codesandbox.

for example you want to open https://github.com/abc/xyz on codesandbox,

Open the github url and add box at the end of github like below https://githubbox.com/abc/xyz

That is all.

After setting up your environment using XAMPP for example. You can create your php scripts for upload and download. Then set up RESTful endpoints in your PHP script to handle HTTP requests for uploading and downloading. To implement callbacks you can use JS to handle the response from your PHP scripts and perform actions based on the result. I really like using Postman to test my APIs and see if everything works as expected.

It doesn't show up probably because you have something wrong in DialogCardPage. Please post DialogCardPage code, and the output from vs when you try to open the dialog.

I think the required role is roles/dns.admin as seen in this documentation

After adding null check for schema object it got resolved and able to see the API details in swagger. It is a OOTB file needs to be modified.

Substack is blocking Azure IPs. Discovered this recently running an instance of FreshRSS in an Azure VM. My hundreds of feeds load fine -- except for any feeds coming from Substack, which gives a 403. Others report the same thing: https://www.reddit.com/r/Substack/comments/1czssm4/substack_is_blocking_my_ip/

This command worked for me I hope this is useful for you

Flutter Pub Upgrade win32

And

flutter pub upgrade I used this command before but it didn't work for me for some reason I think try above command

Thank you guys very much for the answers, the runInInjectionContext solved it!

This doesn't works anymore because google has issued guidelines that we cannot ask if the user likes the app and then (if they do) redirect them to play store to rate the app.

As mentioned by the google:

Your app should not ask the user any questions before or while presenting the rating button or card, including questions about their opinion (such as “Do you like the app?”) or predictive questions (such as “Would you rate this app 5 stars”).

Source

So this feels a little hacky, but I ended up doing:

(window as any).doThing = doThing;

This error gave me nightmares but the solution is very simple. All you have to do is rename the first screen you want to be shown when your app starts to index.js or index.tsx or index.jsx or index.ts depending on the file type or extension you are using. That's it. Don't forget to update the name in other parts of your program as well

searchBar.searchTextField.leftView = nil

This will remove the magnifying glass icon from the UISearchBar. Also it won't leave blank space like the other solutions. This is what the search bar will look like.

I've tried several solutions to resolve the non-standard C++ exception issue in my React Native TypeScript application, but none were successful. Ultimately, I took a significant step by starting a new project in a fresh repository using Expo SDK 52. Here's what I did:

1. Clean Slate: I uninstalled Node.js, Expo, and all related development tools from my MacBook, then reinstalled them. New Project Setup: I created a new Expo project and carefully moved only the code files, avoiding the transfer of package.json and other configuration files.
2. Incremental Build: I rebuilt the project configuration step-by-step, committing and testing each change to ensure the Expo client didn't crash.

This approach worked, and I now have a functioning project. Moving forward, I'll make sure to commit and test changes frequently. As someone new to the JavaScript stack (coming from a Java background), I suspect I might have mismanaged the dependencies. Interestingly, one user reported that the issue occurred when they ran the app on their phone with Wi-Fi turned off, which also happened to me. The root cause remains unclear.

I hope my experience helps others facing similar issues. Coming from Java, I find the JavaScript stack a bit unstable. I understand why many larger companies prefer Java/C#/etc. for backend and native stacks for mobile development. However, as a freelancer focusing on mobile development, I've chosen to use Expo. While it's not as robust as native stacks, I plan to stick with it for now.

Well, there's nothing like answering your own question.

In short, I came across 3 books that helped me understand the issues of multitasking and multiprocessing. The first I recommend "System Design with Ada" (1984) by Raymond J. A. Buhr. In chapter 3, the author shows step by step what to pay attention to when analyzing a problem in order to arrive at the right structure of tasks (processes). As the title indicates, Buhr uses the Ada language to model the problem and implement solutions. The author has also written a book in which he uses C/C++ : "An Introduction To Real-Time Systems: From Design To Multitasking With C/C++".

The third book that helped me understand analysis and multitasking design is a book by David L. Ripps' 1989 "An Implementation Guide To Real-Time Programming". In particular, chapter 4 focuses on the aforementioned issues.

System Design with Ada, R.J.A Buhr, 1984

https://archive.org/details/systemdesignwith0000buhr/page/46/mode/2up

An Introduction To Real-Time Systems: From Design To Multitasking With C/C++, R.J.A Buhr, 1998

https://archive.org/details/introductiontore0000buhr/page/54/mode/2up

An Implementation Guide To Real-Time Programming, David L. Ripps, 1989

https://archive.org/details/implementationgu0000ripp/page/40/mode/2up

I had the same problem. It comes with Qt VS Tools 3.3.0 added recently. The solution, as mention above is to:

• disable automated update for Qt VS Tools extension
• uninstall Qt VS Tools 3.3.0 version
• install Qt VS Tools 3.2.0 version from https://download.qt.io/official_releases/vsaddin/
• restart VS and recompile -> it will work

I am having same issue with claude. The Tool input value from cli seem to be valid but crewai said it is not valid. I also found this discussion https://community.crewai.com/t/issue-with-ast-literal-eval-parsing-json-tool-input-in-toolusage-class/449

My docker was unable to start (running all the given commands) but this was fixed when I opened my docker desktop.

I could find by simple going to ec2 and "create an instance". I was taking the ARM one with t2.micro, which would not work.

text = """ Smart технологии значительно меняют наш мир, делая его более удобным, эффективным и безопасным. Они охватывают различные сферы жизни — от умных домов до городов и автомобилей, способствуя автоматизации процессов и улучшению качества жизни. Использование интернета вещей (IoT), искусственного интеллекта (AI) и других передовых технологий предоставляет новые возможности для оптимизации ресурсов и повышения удобства в повседневной жизни. Однако вместе с преимуществами приходят и вызовы, такие как вопросы безопасности данных, конфиденциальности и высокие затраты на внедрение. Важным является решение этих проблем для полноценного и безопасного внедрения технологий. """

Пример вывода

print(text)

i think you dont have have path/to/ directory structure to your configuration.yaml file. please check the correct file path to configuration.yaml file in your project and correct the file path in pipelines file and re-run the pipeline.