Division by zero returns NULL in SQLite -> multiplying by NULL results in NULL etc.
SQLite does not raise arithmetic exceptions (eg. divide by zero, 1/0). SQLite returns a NULL value for 1/0.
hey what you can do here is:
this way the footer menu will always show even when the modal is open
I have a problem trying to use google maps api in nextjs.
The problem is that I can't access the path where I have my search.tsx file. I get a 404 error in console, and in postman, using the path http://localhost:3000/api/search I also get a 404 error. I share with you my codes and my file organization, I appreciate any help! :)
page.tsx:
for (const category of selectedCategories) {
try {
const response = await fetch("../api/search", {
method: "POST",
headers: {
"Content-Type": "application/json",
},
body: JSON.stringify({
location,
category,
filters: {
minRating,
minReviews,
businessHours,
...filters,
},
}),
});
if (!response.ok) {
throw new Error(
`API request failed with status ${response.status}`
);
}
const data: SearchResponse = await response.json();
if (!data.success) {
throw new Error(data.error || "Failed to fetch leads");
}
const leads = data.results;
// Update count for each
setExtractedLeadsCount((prev) => prev + leads.length);
// Add leads to array with additional metadata
const processedLeads = leads.map((lead) => ({
...lead,
category,
searchLocation: location,
extractedAt: new Date().toISOString(),
}));
allLeads = [...allLeads, ...processedLeads];
} catch (error) {
toast({
title: "Error",
description: `Failed to fetch ${category} in ${location}: ${error.message}`,
variant: "destructive",
});
continue;
}
}
Search.tsx:
import { NextApiRequest, NextApiResponse } from 'next';
import fetch from 'node-fetch';
interface GooglePlacesResponse {
results: any[];
status: string;
error_message?: string;
}
const handler = async (req: NextApiRequest, res: NextApiResponse) => {
if (req.method === 'POST') {
const { location, category } = req.body as { location: string; category: string };
try {
const response = await fetch(
`https://maps.googleapis.com/maps/api/place/textsearch/json?query=${encodeURIComponent(category)}+in+${encodeURIComponent(location)}&key=APIKEY`
);
const data: GooglePlacesResponse = await response.json();
res.status(200).json(data); // Devuelve los datos obtenidos
} catch (error) {
console.error("Error fetching data from Google Places:", error);
res.status(500).json({ error: "Error fetching data" });
}
} else {
res.setHeader('Allow', ['POST']);
res.status(405).end(`Method ${req.method} Not Allowed`);
}
};
export default handler;
i have the same problem with my crystal report now in 2024, have you find any solution?
read this document and please add a star in article
https://github.com/gitipasand/install-Oracle-PHP-extension-on-MAC-M1
You need to use WITHIN GROUP (ORDER BY date DESC)
.
SELECT
sku,
LISTAGG(DISTINCT date, ';') WITHIN GROUP (ORDER BY date DESC) AS date_list
FROM sku_data
GROUP BY sku
Clone the Nginx source and the ngx_http_geoip2_module. Run ./configure --with-debug --add-dynamic-module=ngx_http_geoip2_module, then make modules. The .so file will be in the objs directory
can you show me the error you are having?
Did you ever managed to solve this issue? I am going through the exact same thing but nothing seems to work.
This problem happens when trying to build your own library and trying to publish it into maven repository, so that this library can be included in other applications as a dependency/plugin
This exact problem is probably related to this topic on Stack Overflow
How to fix Plugin with id 'com.github.dcendents.android-maven' not found. in android studio
and this error is probably caused by lines in gradle files like these
apply plugin: 'com.github.dcendents.android-maven'
plugins {
id "com.github.dcendents.android-maven" version "2.1"
}
dependencies{
classpath 'com.github.dcendents:android-maven-plugin:1.2'
}
So the solution might be to comment/delete lines like above and rebuild/resync project with gradle files. At least error notification should be gone
this plugin com.github.dcendents.android-maven is based on this github repository
https://github.com/dcendents/android-maven-gradle-plugin
This is much likely an abandoware as written in this repository's readme
Alternatively you can try using different android build plugin like mentioned in above repository's readme
https://developer.android.com/studio/build/maven-publish-plugin
could you make me a code so that I can brute force a phone that I connect to the PC I use for the program (sorry for my English I don't speak the language well)
git request-pull is a Git command that generates a pull request message that you can send to someone else to request that they pull your changes into their repository. It essentially prepares a formatted message that shows the differences between two branches and describes the changes you'd like them to review and merge. However, git request-pull doesn't actually create a pull request on GitHub or any other hosting service — it simply formats the information for a human recipient.
I was looking for a solution to this here in 2024. This free plugin is super simple for adding email content per product: https://wordpress.org/plugins/product-specific-email-content-for-woocommerce/
It may not be robust enough for the use case of the OP but it worked for sending product-specific info.
Please use MarkupString
:
<p>@(new MarkupString(Loc["LocalizedText"]))</p>
I have the same problem, I'm running in circles...
What of U want the items in different names?
The command is q
, for quit
.
I actually have nothing more to say, but SO wants me to say more, so here you go.
Большое спасибо, сделал мой вечер
I'm recently working in a project aiming to make trivial to handle cases likes this, check it: https://github.com/brenoliradev/svelte-standalone
The repo you are pulling from https://github.com/ut0mt8/nginx-rtmp-module
does not have a v1.2.2
package, see available releases here.
Compare with your original repo's releases (arut/nginx-rtmp-module
) here.
The latest available in ut0mt8/nginx-rtmp-module
is v1.2.0
.
I have experienced the same issue. I found out that it's a bug related to the Avast antivirus software. See: (https://answers.microsoft.com/en-us/windowsclient/forum/all/avast-curl-ssl-revocation-problem/a4fca682-55ec-499d-bb71-208862d617ea). I have switched to another antivirus software (with a different engine) and the curl command started working again. Also, programs with http connection worked on Eclipse IDE, but not on VS code, but that could be caused by a different error. (I didn't test the programs on Eclipse IDE before I switched antivirus softwares.) Or you can wait for the bug to get fixed. If you decide to switch antivirus softwares, make sure you do it safely.
Hope I helped you at least a bit.
Inside of the redraw
event, you can check current zoom level, and if it exceeds certain threshold, you can dynamically add tiledwebmap
series. Then, on zooming out, you can also check the zoom level and based on it's value hide or show the tiledwebmap
series.
events: {
redraw() {
const chart = this;
const zoom = chart.mapView.zoom;
const zoomThreshold = 3;
if (chart.series.length <= 1) {
if (zoom >= zoomThreshold) {
chart.addSeries({
type: 'tiledwebmap',
provider: {
type: 'OpenStreetMap'
}
}, false);
}
} else
chart.series[1].setVisible(zoom >= zoomThreshold, false);
}
}
}
Demo: https://jsfiddle.net/BlackLabel/pczrf1ah/
API:
https://api.highcharts.com/class-reference/Highcharts.Chart#addSeries
https://api.highcharts.com/class-reference/Highcharts.Series#setVisible
You might need to check your 'util.js' and make sure to export myFunction
from that file. Something like this :
//in util.js
export function myFunction(){
...do something...
}
and then you can imported this function from any other files. And also make sure you have the correct path to 'util.js'
I got this issue because my OS did not trust openid server's certs.
The curl https://keycloak.server/realms/<realm-name>/protocol/openid-connect/certs
command should not throw SSL error.
Just place your array(
part inside the entry_options
Turns out there were only some configurations missing.
So the general steps I did:
To start the agent:
eval "$(ssh-agent -s)"
Add the key:
ssh-add ~/.ssh/id_rsa
Create a config File:
git config --global core.sshCommand "C:/Program Files/Git/bin/ssh-agent.exe -s"
Set the Default SSH Socket:
git config --global core.sshCommand "ssh -i ~/.ssh/id_rsa"
This fixed my issues.
HTTPX does not directly support loading PKCS12 (.p12) files, but you can use the cryptography library to extract the necessary key and certificate from the PKCS12 file and then pass them to HTTPX
I do not know why this is happening but I am getting the same error! I am contacting technical support for help, will update if I hear anything.
The titan one, does that mean it's normal or not normal because I have android and see that
{'a': ['aa', 'cc'], 'b': ['xx', 'yy']}
You should enter a path like /z/z* Enjoy this great training Best regards
I have the same desire, this official thread implies the option exists however the solution post doesn't mention the name of the setting or how to access it
You're not selecting the textbox. Psuedo selector do not work programmatically.
try
await page.locator(`*[data-lexical-editor="true"][aria-label^="What's on your mind"]`).click();
RedHat's ubi8 image can be used without subscription, is freely redistributable, and can be used commercially, according to their FAQ.
Section on subscription:
15. Do I need a subscription to use UBI?
No. The Red Hat Universal Base Images and all associated content can be used for development and deployment without the need for a Red Hat subscription. However, for a fully supported operational experience and access to an expanded list of non-UBI tools, containers built on UBI must be deployed on a Red Hat platform such as OpenShift or Red Hat Enterprise Linux.
Accessing non-UBI content does require a Red Hat subscription.
They do recommend a subscription for operational support.
I recommend reviewing their EULA. Which also states:
With the exception of the Red Hat trademark identified in Section 2 below, each software component is governed by a license that permits you to run, copy, modify, and redistribute (subject to certain obligations in some cases) the software components.
{
"input": "{ \"x-test-header\": \"$util.escapeJavaScript($headerValue)\", \"body\": $util.escapeJavaScript($input.json('$'))}",
"stateMachineArn": "$util.escapeJavaScript($stageVariables.arn)"
}
I am new to this platform and also to Python. But i talked to my teachers and also took some help from AI and here is i find : This problem where you aim to maximize the number of fulfilled orders given the constraints. Here's how to approach it:
Steps to Solve:
Sort the Orders: Start by sorting the order array in ascending order. This ensures you try to fulfill smaller orders first, maximizing the number of orders you can complete.
Iterate Through the Orders: Iterate through the sorted order array and try to fulfill each order. Deduct the number of widgets required for each fulfilled order from k.
Break When Exceeding k: If at any point the widgets required for an order exceed the remaining widgets (k), stop and return the count of orders fulfilled.
Sort the orders: [1, 2, 3, 4, 5].
Start fulfilling:
Order 1: k=7-1 = 6, fulfilled = 1.
Order 2:k = 6-2 = 5 , fulfilled = 2.
Order 3: k= 4-3 = 1 , fulfilled = 3.
Order 4: Cannot fulfill because 4>1 .
Thus, the output is 3.
This approach is efficient and ensures the maximum number of orders is fulfilled
You can try update record processor with combination of nifi expression language like
Attribute as /MSISDN VALUE ${field.value:equals('1994'):ifElse('0',1)}
I had the same issue a year ago. I implemented a fargate acting as a rate limiter in front of the stepfunctions and check the number of executions every 60 secs. If it's more than the threshold, I wait or launch a new stepfunction execution. The ratelimiter was launched by a lambda with concurrency limit 1
I see that you should remove the @ManyToOne reference in the recipe class, I don't see why recipe should be mapped to user. The user class has reference to a list of recipes which is the right way and it's enough.
maybe avoid two-way mapping in your designs.
I am not sure what happened, but I switching from NPM to PNPM, and that resolved my problem.
It could be that in doing the transition, I corrected a missed configuration or removed a temp folder, such as .nuxt, that I had previously missed.
I had a similar error. My solution was simple, I had added a new xhtml file and I just had to republish the project in order to make Facelets recognize the path.
Maybe you can try to increase the batch size. Are there other reason to process 30 in a batch ? Also, maybe you can wrap the process
function inside a dataloader for better batch handling.
You need to --add-modules jdk.crypto.cryptoki
in addition to the --add-exports
to the erroring module by going to Settings/Build, Execution, Deployment/Compiler/Java Compiler
and Override compiler parameters per-module
for the failing module.
For me the problem was the bluestacks
emulator. I closed it and everything works fine.
Resolved it by installing fonts:
apk --update --upgrade --no-cache add fontconfig ttf-freefont font-noto term
inus-font \
&& fc-cache -f \
&& fc-list | sort
If you want to add custom fonts, try adding them under /usr/share/fonts/Additional
references
I wonder why the accepted answer suggests groups? If we keep in mind what OP asks "I need to exclude some fields from validation (only for some cases)." The answer is "Not possible" You can not exclude only in some cases. Actually what you have to do is include everywhere except were not needed. If I have an object with many fields or an object that is composed of other objects and the nesting is deep:
public class Person {
@NotNull
private String firstName;
@NotNull
private String lastName;
@Valid
@NotNull
private Address address;//deep object
<...many more fields...>
}
And the object is used in 100 places (speaking figuratively). And i want to allow field lastName
to be null
in just one place (speaking figuratively). Using groups requires to make changes on all fields and on all nested object fields and also in all places where this object Person is used.
I would rather only mark the field in question, and make changes only in that one particular place. Not possible. Prove me wrong :)
I have a simple example using FMU and compare simulation with data and adjust three parameters for the best fit. All is in a Jupyter notebook that you can run from the web-browser without installation using Google Colab. The notebook can either be run using PyFMI or FMPy.
https://github.com/janpeter19/BPL_TEST2_Batch_calibration
The only thing you need is to have Google account and starting the script means you "borrow" from Google a virtual Linux machine that install all packages needed and then run the script that perform the example. So just, see the example evolve on your screen. Installation (on the virtual machine) takes a few minutes. Afterwards you can continue to interact with the FMU. Note that interaction in the notebook is with a set of commands that provide a simplified "high-level" approach. If you like to see the details of Python code just look at the setup files in the repository.
Another variant:
import 'dart:math';
extension RangeNum on num {
bool inRange(num a, num b) {
return min(a, b) <= this && this <= max(a, b);
}
}
I manage a lot of websites. Basically, after Wordpres 6.7 update, a few websites which had 'WP_DEBUG' as true, started to show errors about _load_textdomain_just_in_time.
It is happening with a lot of plugins.
These did not work. I was hoping to change the sysdate to the Julian date.
The Sysdate for my application displays as "22-NOV-24" in Oracle SQL Developer queries.
When using the options from the first comment:
TO_NUMBER (TO_CHAR (SYSDATE, 'J')) TO_JULIAN -- Resulted in 2460637 on November 22, 2024, so this does not work
TO_DATE (2457259, 'J') TO_GREGORIAN -- Resulted in 24-AUG-15 on November 22, 2024, so this does not work
It looks like this question still needs some work with an answer that actually works.
Had a similar problem in my application. There was a missing await
on the method calling the router.push({ query })
that created a race condition clobbering some of my params.
Alt + Click shifts to multi-cursor mode. Starting at the top, hold the left mouse button down and drag the cursor. I am unsure if this only worked because I added a multi-cursor extension some time ago, but I couldn't find the extension in my command palette.
In addition, I found this by clicking on the "Selection" menu on VScode and noticed it had two commands at the bottom: "Column Selection Mode" and "Switch to Alt + Click for Multi-cursor."
I was able to solve this problem by using:
<script src="{{ url_for('static', filename='script.js') }}"> </script>
remember that lists standing counting index from zero so your list ends on 3.
first item index: 0
second item index: 1
third item index: 2
fourth item index (last item): 3
four will be for fiveth item.
Sua página web possui certificado?
Caso não, este erro continuará acontecendo.
Você deve implementar pelo menos um certificado auto assinado em sua página web para que a mesma tenha acesso aos recursos do dispositivo em questão.
I was able to resolve this issue by updating the url as showm below.
jdbc:db2://<host>:<port>/<DB>:currentSchema=<schema>;clientProgramName=MyApp;
I had the same issue but in my case the problem was that I was trying to open the R project from a dropbox folder that was online only. After I changed the status to "available offline", I was able to open the same R project file without issues.
No, Salesforce Inspector does not bypass permission sets or profile restrictions when editing fields. Salesforce Inspector operates within the limits of the user's field-level security (FLS), object permissions, and sharing settings as determined by their profile and assigned permission sets.
You need to ensure that the paths in the protocol match the paths shown in the report. For example,
val protocol = karateProtocol(
"/api/v2/transactions/{referenceNo}" -> Nil,
"/api/v2/transactions/{referenceNo}/pay-way" -> Nil
)
This change should aggregate the requests correctly in the report.
To create a calculated column in MAIN_TABLE that sums the AMOUNT from the related DATA_TABLE , grouped by value in the color column . Here's an example of how to create the calculated column : Total_Amount_By_Color = CALCULATE( SUM(RELATED(DATA_TABLE[AMOUNT])), FILTER( DATA_TABLE, DATA_TABLE[color] = MAIN_TABLE[color] ) )
Just throwing a few ideas:
Option 1: Using the BigQuery Console Navigate to BigQuery Console: Go to the BigQuery Console.
Create a Dataset (if not already created):
Click + Create Dataset in the left panel. Enter a dataset name, data location, and optional expiration date, then click Create. Create Tables:
Within the dataset, click + Create Table. Choose the Source: Empty Table: Create a table from scratch. Upload or Google Cloud Storage: Create a table based on imported data. Define the schema for the table by adding fields (columns). Click Create Table. Repeat this step to create additional tables.
A minor fix to the original answer. @ferado mistakenly links the System Interfaces link for Business and vice versa [![enter image description here][1]][1]
have you got anny solution to this ?
Did you get this working? Is the application running on browser?
I am using react and I cant install child_process. It seems to have been deprecated in NPM and most of the comments I find suggest that it can't be run from a browser!
Had the same problem with a project previously opening, compiling and running correctly from VS2022 IDE. The project was originaly placed inside a OneDrive folder, to fix the issue just move the project folder to a different path not inside the OneDrive folder.
Hope this help.
Actually, I think this is what you want:
I1 = LEN_TRIM(NAME)
WRITE(FILENAME,'(A< I1 >,I3.3,A1,I3.3,A3)') NAME,MYPR,'_',IBL,'.nc'
So the name of the file will only be formatted to the length of the file name as that varies & not filled with blank spaces for the CHARACTER size of NAME.
Visual Studio 2022 doesn't support remote development. Please vote for feature request https://developercommunity.visualstudio.com/t/Remote-Development-Similar-to-VSCode/731325
ASSIGN @Handle TO "Filename" opens the file OUTPUT @Handle;"TEXT" writes to the file ASSIGN @Handle TO * closes the file
ASSIGN @Handle TO "Filename";FORMAT ON opens the file as text rather than binary
Maybe a bit of a glitch in PyCharm (using 2024.3), but I found if you delete the file from Commit view, then do a Ctrl-z to undo the delete, the file will be restored on local disk but will remain as "deleted" for the commit changes. You can commit/push the change and it will delete it from the repo while keeping it local.
The problem is that when running the project in XCode it cannot fetch the js bundle which is why it is important to start the metro server with
npx expo run:ios or npx expo run:android
then you can can compile and run the app in XCode
then XCode can fetch the js bundle from the metro server running on your hardware
[Sorting by multiple meta keys] is something that WordPress added support for in 4.2: https://make.wordpress.org/core/2015/03/30/query-improvements-in-wp-4-2-orderby-and-meta_query/
Please note: It is not so obvious, but for ordering with multiple meta keys you have to give each meta_query a name and then use these names in the orderby.
Source: How to order by multiple meta keys?.
using a try cache got the error
VercelPostgresError: VercelPostgresError - 'missing_connection_string': You did not supply a 'connectionString' and no 'POSTGRES_URL' env var was found..
It seems postGres is not properly configured
<item>
<bitmap android:src="@drawable/logo" android:gravity="center|clip_horizontal" />
</item>
I'm in the same situation, it seems that the cypress package isn't installing correctly. I've tested the Viktor Nedelko solution, but it seems that the Cypress installation starts but doesn't finish... In my Gitlab CI pipeline I have the following log:
On another project I'm using Jenkins and in my pipeline the equivalent log when it works looks like this:
by using any programming language
Use e.preventDefault()
to stop default browser behavior
e.preventDefault();
console.log("shoot bullet");```
Yes, it can be done using Openmesh library and then calculating everything manually. Or, more straightforward, it can be done by using libgl which already contains some parametrization algorithms; this link contains the relative tutorial.
You have the wrong tag for
docker.io/ddev/ddev-webserver
. The tag should bev1.23.5
Argh, thank you so much. In Germany we say "Tomaten auf den Augen" ... so stupid.
Cheers, Frank
This is a bug in Python version 3.12.0-3.12.7 It is corrected in Python version 3.13.
Problems can be:
Your issue is that dtype=str defaults to strings of length 1. Fix it by specifying the max length:
import numpy as np
row_length = 5
col_length = 3
# Specify the maximum string length (e.g., 10 characters)
x = np.empty([row_length, col_length], dtype='<U10')
x[1, 2] = 'ddd'
print(x)
I'd recommend checking out the Buf Schema Registry as a platform to host docs! Here's an example of it: https://buf.build/bufbuild/registry/docs/main:buf.registry.module.v1
first: delete it
second: correct it and migrate again
The previous solution didn't work for me as it is. I wanted to save null or DateTime object. But! This works:
public \DateTimeInterface|null $date; // ?\DateTimeInterface - didn't work
hoverEnabled: true - it is help me
o remove the transparency from the navigation bar in Monaco Editor, you would need to modify the CSS or the relevant styles that apply to the editor's layout. The Monaco Editor doesn't provide a direct option for controlling the transparency of its navbar (if you’re referring to the UI elements like the toolbar or editor area), but you can apply custom styles to remove or change transparency.
@jcalz , following your solution in my scenario I have this:
Element.tsx
(as independent component where I get elements from a Kotlin local library module)
export {};
import {getExternalElements} from "externallibrary";
import {useEffect, useState} from "react";
interface Element {
Id: string
State: boolean
Name: string
Address: string
}
export namespace NamespaceElements {
export class Elements {
elementsResult: Array<Element> = [];
constructor() { this.refreshElements() }
refreshElements() {
const [elements_json, setElements] = useState<string | null>(null);
useEffect(() => {
getExternalElements().then(result => {
setElements(result.toString());
})
}, []);
this.elementsResult = JSON.parse(elements_json?.toString() as string)
}
getElementsJsonString() {
return JSON.stringify(this.elementsResult).toString();
}
}
}
declare global {
namespace globalThis {
export import Elements = NamespaceElements.Elements;
}
}
Object.assign(globalThis, NamespaceElements);
which I declare globally in declaration.d.ts
, so it won't need any import when called, as :
declare module "./src/components/Elements/Elements" {
import NamespaceElements from "./src/components/Elements/Elements";
const Elements : NamespaceElements.Elements;
export default Elements;
}
but if in frontend.tsx
where I need to refresh and retrieve having this useEffect:
const [elementJsonString, setElements] = useState<string | null>(null);
useEffect(() => {
Elements.refreshElements()
const elemsString = Elements.getElementsJsonString()
setIpAddress( elemsString.toString() )
}, []);
I get this error TS2339: Property refreshElements does not exist on type typeof Element
.... since I am correctly exporting that class following your scenario , why it doesn't get calling corretly those functions? A suggest is appreciated... maybe I confused something....
Thanks in advance!!!!
<tr>
or <td>
elements.at the end of the line insert "\n \". For example : key=value \n \
Check this VS Code extension that should do just what you want: https://marketplace.visualstudio.com/items?itemName=ctf0.close-tabs-to-the-left
Even though the question is already over 6 years old, I want to add my answer here for people like me, that are confused by the git documentation on this and then land here from a Google search.
The answer of torek works and is probably the workflow as it is intended to be described in the git documentation. What's important to understand, is that when using the --keep-index
option, the index will be kept (as the name suggests) but will still be stored in the stash itself. So you do the following:
# Assuming you have some changes in the index, that you
# want to do tests on, and then some more changes in
# your working directory.
$ git stash --keep-index
# Now do your tests.
$ git reset --hard
$ git stash pop --index
# Now the original situation is restored and you can
# commit.
Basically, after you're done testing you want to completely clean your index and working directory to have no uncommited changes and then reapply the stash. It will recover both the index and your unstaged changes.
There's a variation on this, that I have to use. I'm using a pre-commit hook to verify that code is properly formatted and documentation is complete. Now I have some changes that I want to commit and therefore I stage them but some other changes too that I not only want gone for the sake of testing but also would make me unable to commit. Then I do this:
# Assuming same situation again: There's some stuff
# in the index that you want to commit and also
# some other changes.
$ git stash --keep-index
# After testing:
$ git commit
$ git checkout HEAD~1 . # Note the "."
$ git stash pop
$ git reset .
# Now all your uncommited changes are in your
# working directory again.
The command git checkout HEAD~1 .
basically means: "Make all my files be the same as they were one commit ago, but don't change the branch or anything." The "." at the end is crucial. Without it, you would just move the HEAD to the previous commit and be in a detached HEAD state. After that your files are the same as they were on the commit on which you made the stash. That's why you can just apply the stash here. And after that, you have some staged changes from the checkout command and some unstaged changes from applying the stash. The last command git reset .
just serves to clean this up.
My problem with both of these workflows is what to do, when you learn you have to make changes during the testing phase. It seems to me the only good way is to recover all your changes with a reset and stash pop as in the 1st workflow, then make your changes, then add these changes too and then go back to the testing state again. With the 2nd workflow you can also just do the changes and commit and then at the end of it make sure they will not be overwritten again with your next commit.
This error can occur when there are NULL values in column you are attempting to partition by. Check LASTUPDATE for NULLs.
QueueClient
expects a message that is in UTF-8 format. This is from the documentation:
A message must be in a format that can be included in an XML request with UTF-8 encoding.
The way to serialize your object was causing problems. Using something like this will work:
var queueMessage = System.Text.Json.JsonSerializer.Serialize(item);
because this implementation internally uses Utf8JsonWriter.
Most likely the old library that you ended up using does support Base64 encoding.
datagridValues prop is deprecated, another approach is https://docs.sonata-project.org/projects/SonataAdminBundle/en/4.x/reference/action_list/#customizing-the-sort-order
protected function configureDefaultSortValues(array &$sortValues): void
{
// display the first page (default = 1)
$sortValues[DatagridInterface::PAGE] = 1;
// reverse order (default = 'ASC')
$sortValues[DatagridInterface::SORT_ORDER] = 'DESC';
// name of the ordered field (default = the model's id field, if any)
$sortValues[DatagridInterface::SORT_BY] = 'updatedAt';
}
Found the answer:
@Value("${feign.connectTimeout:10000}") private int connectTimeout;
@Value("${feign.readTimeOut:300000}") private int readTimeout;
@Bean public Request.Options options() { return new Request.Options(connectTimeout, readTimeout); }
I don't see any benefit in using other symbols except perhaps some Greek symbols (such as: α, β, γ, δ, ε, ζ, η, θ, λ, μ, ξ, π) that can be used in some mathematical equations.
To quickly enable Developer Options for another user in Android 4.2.2:
1.Switch to the User Profile: Go to Settings > Users and select the user. 2.Go to "About Phone": In the user's settings, tap About Phone. 3.Tap "Build Number" 7 times: Tap the Build number entry 7 times to unlock Developer Options. 4.Access Developer Options: Go to Settings > Developer Options.