Go to the Build Settings of your target (in this case, the youPod(in which issue) target from the Pods project). Search for the Swift Optimization Level setting. Ensure that for Debug configurations (used for development), the optimization level is set to -Onone. For Release configurations (used for production), it should be set to -O.

you try vice versa for both release and debug -Onone

The error message you're encountering in Android Studio indicates that the Gradle sync process failed to find the required plugin 'com.android.application' version '8.7.3'. This plugin is essential for creating Android applications in Android Studio.

Here's a breakdown of the error and steps to troubleshoot it:

Error Analysis:

Missing Plugin: The error message states that the plugin com.android.application with version 8.7.3 is not found in any of the Gradle repositories searched by Android Studio.

Possible Causes:

Incorrect Gradle Version: The plugin version (8.7.3) might not be compatible with your current Gradle version. Corrupted Gradle Cache: Corrupted Gradle cache can sometimes lead to plugin resolution issues. Network Connectivity Issues: If you're behind a firewall or have unstable internet connectivity, Gradle might fail to download the plugin.

Troubleshooting Steps:

Check Gradle Version Compatibility:

Open your project-level build.gradle file (usually located at the root of your project).

Look for the line that defines the Gradle version. It should be similar to:

    buildscript {
    repositories {
        google()
        mavenCentral()
    }
    dependencies {
        classpath 'com.android.tools.build:gradle:X.Y.Z' (replace X.Y.Z with your current Gradle version)
    }
}

Make sure the Gradle version (X.Y.Z) is compatible with the plugin version (8.7.3). You can find compatibility information in the official Android Studio documentation.

Clean and Rebuild Project:

Go to Build -> Clean Project. Then, go to Build -> Rebuild Project. This will clear the Gradle cache and attempt to download the missing plugin again.

Invalidate Caches and Restart:

Go to File -> Invalidate Caches / Restart. This will invalidate all caches and restart Android Studio, potentially resolving any cache-related issues.

Update Android Studio (if necessary):

Outdated Android Studio versions might have issues with plugin compatibility. Check for updates by going to Help -> Check for Updates.

Check Internet Connectivity:

Ensure you have a stable internet connection to allow Gradle to download the required plugin.

Manual Plugin Installation (last resort):

If the above steps fail, you might need to manually install the plugin. This process is more involved and requires editing specific Gradle files. Refer to the official Android documentation for detailed instructions on manual plugin installation.

Assuming all your requests will come from the same address, you can add in your VirtualHost a ServerAlias parameter (you can define multiples for the same virtualhost), so the load balancer will redirect to the same address and the server can answer.

https://httpd.apache.org/docs/2.4/mod/core.html#serveralias

You can get the open in Xcode options from Tool -> Flutter -> Open iOS/macOS module in Xcode. But first select ios folder.

The earlier posted answer did not help me, since my config already included the setup. Just wanted to note down, why I did not see them, in case someone missed it like I did.

When running PlayWright in ui mode, at the top left, there is a little filter option, that by default does not show all the projects, mentioned in the config file. You can select the ones you need (in my case, they are named by browser).

For my case I am using docker in windows 10 got the same error when installing Zookeper and kafka

I have selected Switch to linux container then automatically my zookeeper and kafka installation started

try these in your terminal

1. Connect to same Wi-fi network
2. adb devices
3. ping <MOBILE IP ADDRESS>
4. adb tcpip 5555
5. adb connect <MOBILE IP ADDRSS>
6. Disconnect USB

use flutter dymaic icons package of flutter

use job service by Job Scheduler he use internet and access network state permission work correctly in background and not show any notification

Try to get sum as type Long.

fun sumCarbs() : LiveData<Long>

And add case sensitive search for WHERE clause

@Query ("SELECT SUM(amountFood) FROM user_table WHERE typeFood GLOB '*' || :food || '*'")
fun sumCarbs(food : String) : LiveData<Long>

Make sure you are querying from right table.

When we "open" a web page usually it's made via a GET request, it may be missing your GET route to send the request to your view.

I think your routes must be something like this:

route::view('/contato', 'contato');
route::post('/contato', [ContatoController::class, 'contato'])->name('app.contato');

PS

I'm assuming your view is on root.

If you need to send some data to your view you may need to go to the controller first.

I had this issue as well.

I was able to resolve it by "Reset Charles Root Certification"

Then the cart was added to my keychain.

I'm not aware of any "known" efficient algorithm to compute this, but the networkx package for python does have an is_forest(G) method that returns true if G is a forest.

for node in nx.connected_components(graph):
    subgraph = graph.subgraph(node)
    if nx.is_forest(subgraph):
        forest_count += 1

Found the problem. Becuase this is a PRODUCTION build (which I'm not used to) we didn't get any debugging logs i believe. So the problem was initially that the code i produced in the application didn't handle a empty database correctly. After adding some catches and default values to handle this it worked fine.

Error says you don't have permission to use that port. Maybe you already have something running? Try using a different port

Also what OS?

Google Calendar Events

On the Current Stages of Google Calendar API, a direct method that works with Appointment Schedule is not supported. The appointment schedule is just basically an insert Method of Google Calendar removing its user interface. If you are working with Google Calendar API, User Interface should not be needed, if you need the User Interface, then creating a Web-App, that creates Google Calendar Event should be what you are focusing on.

Sample Output

Booking Page

Reference

• Google Calendar API

• Add a Google Calendar to your website

In Ansible collections, reusable code such as classes and functions should be placed in the module_utils directory. This is where common utility functions and libraries are typically stored for use across multiple modules.

Here are 3 Steps to Solve your coding Problem written in Python:

1. Organize the Project Directory: Your directory structure should look like this:

   /
   |__ collections
       |__ ansible_collections
           |__ my # Namespace
               |__ tools # Collection
                   |__ plugins
                       |__ modules
                           |__ my_module.py # Module
                       |__ module_utils
                           |__ my_lib.py # Utility File
   |__ my_playbook.yml
   

2. Place Reusable Functions in module_utils:

   • You should place your reusable functions inside the module_utils/my_lib.py file. This ensures that they are treated as utility files and can be imported correctly.

3. Import the Functions Correctly in my_module.py:

   • In your my_module.py, you need to import the utility functions using the correct import path relative to the module_utils directory.

Example Code:

1. my_lib.py (Utility File)

# my_lib.py
def my_func():
    # A simple function that returns a message
    return "Hello from my_func!"

# You can also define reusable classes here if needed
class MyClass:
    def __init__(self, name):
        self.name = name

    def greet(self):
        return f"Hello, {self.name}!"

2. my_module.py (Ansible Module)

# my_module.py
from ansible.module_utils.my_lib import my_func, MyClass  # Correct import

def run_module():
    # Calling the function from my_lib.py
    result = my_func()
    print(result)

    # Using the class from my_lib.py
    my_class_instance = MyClass('StackOverflow')
    print(my_class_instance.greet())

if __name__ == '__main__':
    run_module()

3. my_playbook.yml (Playbook)

---
- name: Test my_module
  hosts: localhost
  tasks:
    - name: Run custom module
      my.tools.my_module:

Explanation:

1. Directory Structure:

   • plugins/modules/my_module.py: This is your Ansible module where you are using reusable functions or classes.
   • plugins/module_utils/my_lib.py: This is where you store reusable functions and classes that can be imported by your modules.

2. Correct Importing:

   • The proper way to import functions and classes is:

     from ansible.module_utils.my_lib import my_func, MyClass
     

     This imports the functions or classes from the my_lib.py file inside the module_utils directory. The ansible.module_utils is the correct namespace in this context.

3. Running the Module:

   • When you run my_playbook.yml, Ansible will invoke your module my.tools.my_module, which uses the my_func and MyClass from my_lib.py.

Sample Output:

If you run the playbook, the output would be:

Hello from my_func!
Hello, StackOverflow!

Conclusion:

• Modules in Ansible should import reusable classes/functions from the module_utils directory.
• Always use the correct namespace to import from module_utils.
• This approach ensures clean, maintainable, and reusable code within your Ansible collection.

This should solve your problem by organizing your reusable code properly in the module_utils directory and importing it correctly in your modules.

I think you got the answer now, Thank you jeremywat.

In 2025, using Jakarta namespaces and Java 19+, the code would be:

import jakarta.servlet.jsp.jstl.core.Config;
(...)
Config.set(session, Config.FMT_LOCALE, Locale.of("en", "US"));
// or Config.set(request, Config.FMT_LOCALE, Locale.of("en", "US"));

Drag the Collection element from the Agent palette onto the graphical diagram of agent type or experiment. Choose the type: Arraylist. Choose the element class others and AgentArrayList so you can store population of agent inside the collection.

I don't know posthog, but I can share some experience with PyCharm and celery.

You need to run the celery worker directly from PyCharm. The detour with watchmedo is not debuggable. For debugging the worker I also need to run it in a local poetry env. Debugging it in a remote Docker interpreter did not work for me either. While the debugger then works fine, it does not reload on code changes any more, which is quite frustrating.

So I usually develop with celery and watchmedo in a Docker container. Only every now and then when I really need the debugger, I start it locally.

These are not pickers themselves in python. You’d still need a front-end or GUI approach for an actual “picker” interface.

For a web interface with a hijri/arabic calender look here: django Arabic Hijri calendar

To run multiple processes simultaneously use apply_async:

import multiprocessing

def function():
    for i in range(10):
        print(i)

if __name__ == '__main__':
    p = multiprocessing.Pool(5)
    p.apply_async(function)
    p.close()

I think you also need to add the 'schema' name in the @JoinTable, as you have a custom schema for your Entity Table, otherwise check the 'public' schema for the 'join table'.

"spring.jpa.properties.hibernate.show_sql=true" - is useful property to check what queries Hibernate is issuing to the database.

    @ManyToMany(cascade = CascadeType.ALL)
     @JoinTable(name = "drug_symptom", schema = "meds",
    joinColumns = @JoinColumn(name = "drug_id",nullable = false),
    inverseJoinColumns = @JoinColumn(name = "symptom_id", nullable = false))
     private Set<SymptomEntity> symptoms;

look this page maybe help you ! https://github.com/shuwada/logback-custom-color

have you got any solution for it ?

any solution for this topic ? I'm facing the same issue and still stuck :'(

The solution that worked for me was to load emojifont package: library(emojifont).

I found the solution here: unicode symbol(s) not showing in ggplot geom_point shapes (and pdf).

Thanks.

If you migrated to NET 8 and got this error, it's a breaking change:

https://learn.microsoft.com/en-us/dotnet/core/compatibility/containers/8.0/aspnet-port

that's why jakegb answer worked:

Use the EXPOSE instruction in your Dockerfile to expose port 8080.

Use the WEBSITES_PORT app setting with a value of "8080" to expose that port.

I just stumbled over georg's nice solution and couldn't resist providing a convenience function using his approach:

import json

def dict_list_2_dict_set(dict_list):
    return [json.loads(d) for d in set([json.dumps(d, sort_keys=True) for d in dict_list])]

Sleak is a good tool but it lacks information about Widget handlers. You can list the Shells, Composites and controls from the Display object. display.getShells(), shell.getChildren(), composite.getChildren(). It is more complicated with menu Widgets that are not bound to a Control. They are listed in the menus array in the Decorations class that the Shell extends but not visible :( If anyone has found a way to access the fill list of Widgets or the menu array without changing the SWT source, please comment.

A transparent Border was added as an invisible overlay on top of the Run element within a Grid. This Border allows tooltips to be displayed without altering the Run element's behavior or appearance. The tooltip properties are be applied to the Border, ensuring the tooltip functionality works as expected. Below is the change made:

<ControlTemplate x:Key="CustomTemplate" TargetType="TextBox">
<Grid>     
<TextBlock FontSize="{TemplateBinding FontSize}" TextWrapping="Wrap" TextTrimming="CharacterEllipsis"                AutomationProperties.AutomationId="CustomTextBlockId">         
<TextBlock Style="{StaticResource CustomStyle}" TextWrapping="Wrap" Text="{Binding Path=DisplayText}" />     
</TextBlock>
<Border Background="Transparent"
    ToolTipService.ToolTipType="Auto"
    ToolTipService.ToolTipHeader="{Binding Path=ToolTip.ToolTipHeader}"
    ToolTipService.ToolTipBody="{Binding Path=ToolTip.ToolTipBody}">
</Border>
</Grid>
</ControlTemplate>

Train-Test split ration depends on your flexibility and the processing power of your pc .

So to conclude you can make 70:30 ,80:20 .... just give a try and expermient whats happening actually

Happy learning !!!

Running php -m will list all currently enabled modules.

If you look at the top and see this warning:

PHP Warning: Unable to load module "http" because the required module "raphf" is > not loaded You just need to install ext-raphf.

If you are using Ubuntu, just run sudo apt install php-raphf.

Then run php -m until there are no errors or warnings above.

After solving all warnings, you can continue installing dependencies.

In my case, on php7.4 I needed to install the following packages

sudo apt install php7.4-raphf
sudo apt install php7.4-propro

import 'package:flutter/material.dart';

class DraggableSliverList extends StatelessWidget { final List items;

const DraggableSliverList({Key? key, required this.items}) : super(key: key);

@override Widget build(BuildContext context) { return SliverList( delegate: SliverChildBuilderDelegate( (context, index) { return DragTarget( builder: (context, candidateData, rejectedData) { return Card( child: ListTile( title: Text('Item ${index + 1}'), ), ); }, onAccept: (data) { // Handle data received from another DragTarget // This might involve reordering the list }, onWillAccept: (data) { // Optionally, specify conditions for accepting data return true; // Accept data by default }, ); }, childCount: items.length, ), ); } }

I trained resnet50 recently on imagenet1k which you can read about here:

blog: https://medium.com/@rraushan24/training-resnet-50-from-scratch-lessons-beyond-the-model-4b96fa23f799

github: https://github.com/Rakesh-Raushan/trainining_resnet50_from_scratch_on_imagenet1k

Sometimes option disk.partition.size in Android device manager should be decreased . Happened to me once when my disk size was too low and my disk.partition.size was under that size

I ran into the same issue and it was because the test project referenced another project that had the xunit.extensibility.core as a dependency. Reworking this so only the top-level test project had references to any xunit assemblies fixed it.

I posted a BUG report on the pylon repo for this, but since then I can't reproduce the issue above anymore.

For more details, see the bug report.

Given that I don't know the cause, I have no guarantee that it will keep working now. Therefore, any additional information related to this issue is welcomed!

I am also facing the same issue and below is the complete code i am using in JMeter tool-

import com.mongodb.MongoClient;
import com.mongodb.MongoCredential;
import com.mongodb.ServerAddress;
import com.mongodb.client.MongoCollection;
import com.mongodb.client.MongoDatabase;
import org.bson.Document;
import org.bson.types.ObjectId;
import static com.mongodb.client.model.Filters.*;
import static com.mongodb.client.model.Updates.*;

// MongoDB connection details
def serverAddress = new ServerAddress(vars.get("mongoHost"), vars.get("mongoPort").toInteger())

// MongoDB credential information
def username = vars.get("mongoUsername");
def databasename = vars.get("mongoDatabase");
def password = vars.get("mongoPassword").toCharArray()

def credentials = MongoCredential.createCredential(username, databasename, password)

// Create MongoClient
def mongoClient = new MongoClient(serverAddress, [credentials] as List)

// Connect to the database
def database = mongoClient.getDatabase(databasename)

// Access a collection
def collection = database.getCollection(vars.get("mongoCollection"))


// Document to find

Document result = collection.find(eq("email", vars.get("mail"))).first();
//Document result = collection.await collection.find({});

if (result != null)
{
// Document to update
                //insertOne
    collection.updateOne(eq("email", vars.get("randomEmail")),combine(set("isActive", true)));
    return "User with email=" + vars.get("email") + " modified";
    //return result;
}else
{
    return "No Record Found";
}


// Close MongoDB connection
mongoClient.close()


**error message-**
Response code:500
Response message:javax.script.ScriptException: com.mongodb.MongoTimeoutException: Timed out after 30000 ms while waiting to connect. Client view of cluster state is {type=UNKNOWN, servers=[{address=mongo --host effie-sharedperf-docdb.cluster-cpmjeylhxh2g.us-east-1.docdb.amazonaws.com:27017, type=UNKNOWN, state=CONNECTING, exception={com.mongodb.MongoSocketException: mongo --host effie-sharedperf-docdb.cluster-cpmjeylhxh2g.us-east-1.docdb.amazonaws.com}, caused by {java.net.UnknownHostException: mongo --host effie-sharedperf-docdb.cluster-cpmjeylhxh2g.us-east-1.docdb.amazonaws.com}}]

SampleResult fields:
ContentType: 
DataEncoding: null

Not all EU States give a full answer, you might be interested in the PHP/Curl example i wrote with all the VIES REST API parameters explained.

https://stackoverflow.com/a/79342428/4554329

Same problem (and solution) for any plugin package, for example melos. Problem occurs when upgrading/downgrading flutter. Package activated within different flutter version should be deactivated/activated again.

flutter upgrade
...
flutter pub global deactivate melos
flutter pub global activate melos

For me it deleted the shared preferences, when I force installed an older app version (with lower build number) with the same app id. This probably doesn't affect published builds, as newer versions need to have a higher build number.

did you manage to solve it? I have the same problem

I am facing the same issue as well..I am going to provide my code and if someone who understands this problem, please help out. This has been this way since I started using Algolia.. for almost two years now.. I can never solve this issue.

here is lazy load class

class LazyLoadShortlists {
  const LazyLoadShortlists(
      this.alogliaShortlist, this.pageKey, this.nextPageKey);

  final List<MdlShortlistAlgolia> alogliaShortlist;
  final int pageKey;
  final int? nextPageKey;

  factory LazyLoadShortlists.fromResponse(SearchResponse response) {
    final items = response.hits.map(MdlShortlistAlgolia.fromJson).toList();
    final isLastPage = response.page >= response.nbPages;
    final nextPageKey = isLastPage ? null : response.page + 1;
    return LazyLoadShortlists(items, response.page, nextPageKey);
  }
}

And here is my api call for Algolia

class AllShortlistRepository {
  /// Component holding search filters
  final filterState = FilterState();

  // setup a page that display houseDatabase
  final PagingController<int, MdlShortlistAlgolia> pagingController =
      PagingController(firstPageKey: 0);

  final searchTextController = TextEditingController();
  // search houses in Algolia Database
  final shortlistDatabase = HitsSearcher.create(
    applicationID: AlgoliaCredentials.applicationID,
    apiKey: AlgoliaCredentials.apiKey,
    state: const SearchState(
      indexName: AlgoliaCredentials.shortlistIndex,
      numericFilters: ["createdTime >= 0"],
      hitsPerPage: 10,
    ),
  );

  late final _agentNameFacet = shortlistDatabase.buildFacetList(
      filterState: filterState, attribute: 'agentName');

  late final _pinShortlistFacet = shortlistDatabase.buildFacetList(
      filterState: filterState, attribute: 'pinShortlist');

  AllShortlistRepository() {
    shortlistDatabase.connectFilterState(filterState);

    displayPropertiesOnThePage.listen((page) {
      if (page.pageKey == 0) {
        pagingController.refresh();
      }
      pagingController.appendPage(page.alogliaShortlist, page.nextPageKey);
    }).onError((error) {
      pagingController.error = error;
    });

    // this loads the list of house sucessfully properly when its enabled, but search does not work anymore
    // but, when this disable, the search works, but it does not load the list of houses anymore
    pagingController.addPageRequestListener((pageKey) =>
        shortlistDatabase.applyState((state) => state.copyWith(page: pageKey)));
    // pagingController.addPageRequestListener((pageKey) {
    //   shortlistDatabase.applyState((state) => state.copyWith(
    //         page: pageKey,
    //       ));
    // });

    filterState.filters.listen((_) => pagingController.refresh());
  }

  /// Get buyer list by query.
  // void search(String query) {
  //   pagingController.refresh();
  //   shortlistDatabase.query(query);
  // }
  void search(String query) {
    pagingController.refresh(); // Reset the PagingController state
    shortlistDatabase.applyState((state) => state.copyWith(
          query: query,
          page: 0, // Reset to the first page to ensure a fresh search
          facetFilters: [
            'createdTime:${DateTime.now().millisecondsSinceEpoch}'
          ],
        ));
  }

  Future<List<ShortlistQuerySuggestion>> searchWithTypeAhead(
      String query) async {
    pagingController.refresh();
    shortlistDatabase.query(query);
    return suggestions.first;
  }

  // get stream of properties
  Stream<LazyLoadShortlists> get displayPropertiesOnThePage =>
      shortlistDatabase.responses.map(LazyLoadShortlists.fromResponse);

  /// Get stream of search result, like the number of the properties
  Stream<SearchMetadata> get searchMetadata =>
      shortlistDatabase.responses.map(SearchMetadata.fromResponse);

  // get stream of agentName
  Stream<List<SelectableFacet>> get agentName => _agentNameFacet.facets;

  // toggle agentName
  void toggleAgentName(String agentName) {
    pagingController.refresh();
    _agentNameFacet.toggle(agentName);
  }

  /// Get stream of list of pinShortlist facets
  Stream<List<SelectableFacet>> get priceRangeFacets =>
      _pinShortlistFacet.facets;

  /// Toggle selection of a priceRange facet
  void togglePinShortlist(String pinShortlist) {
    pagingController.refresh();
    _pinShortlistFacet.toggle(pinShortlist);
  }

  /// Clear all filters
  void clearFilters() {
    pagingController.refresh();
    filterState.clear();
  }

  Stream<List<ShortlistQuerySuggestion>> get suggestions =>
      shortlistDatabase.responses.map((response) =>
          response.hits.map(ShortlistQuerySuggestion.fromJson).toList());

  /// Replace textController input field with suggestion
  void completeSuggestion(String suggestion) {
    searchTextController.value = TextEditingValue(
      text: suggestion,
      selection: TextSelection.fromPosition(
        TextPosition(offset: suggestion.length),
      ),
    );
  }

  /// In-memory store of submitted queries.
  final BehaviorSubject<List<String>> _history =
      BehaviorSubject.seeded(['jackets']);

  /// Stream of previously submitted queries.
  Stream<List<String>> get history => _history;

  /// Add a query to queries history store.
  void addToHistory(String query) {
    if (query.isEmpty) return;
    final _current = _history.value;
    _current.removeWhere((element) => element == query);
    _current.add(query);
    _history.sink.add(_current);
  }

  /// Remove a query from queries history store.
  void removeFromHistory(String query) {
    final _current = _history.value;
    _current.removeWhere((element) => element == query);
    _history.sink.add(_current);
  }

  /// Clear everything from queries history store.
  void clearHistory() {
    _history.sink.add([]);
  }

  /// Dispose of underlying resources.
  void dispose() {
    shortlistDatabase.dispose();
  }
}

It also happens, if you force install an old app version (lower build number) on top of the current one.

try add a SPACE before the tag containing the "not highlighted" javascript...

Atm. it is not possible to enable both. Or at least, vertical scrolling behaviour will override horizontal scrolling.

I just created a PR implementing both ways of scrolling at the same time by defining a switch-key to be pressed analogue to the zoomKey.

Give it a look: https://github.com/visjs/vis-timeline/pull/1852

I found a solution myself.

const GifCard = ({
  gif,
  onClick
}: {
  gif: Gif;
  onClick: (gif: Gif) => void;
}) => {
  const [isLoading, setIsLoading] = useState(true);

  return (
    <>
      <Skeleton
        w="100%"
        maw={160}
        radius="xs"
        aria-label="gif skeleton"
        h={gif.media_formats.gif.duration > 3 ? 160 : 90}
        style={{ display: isLoading ? 'block' : 'none' }}
      />

      <Image
        src={gif.media_formats.gif.url}
        w="100%"
        maw={160}
        radius="xs"
        alt="GIF"
        onLoad={() => setIsLoading(false)}
        style={{ display: isLoading ? 'none' : 'block' }}
        onClick={() => onClick(gif)}
      />
    </>
  );
};

Ljudi ja sam toliko odletio u visine, da pojma nema sta jec sve, mislim čak da sam i umro, ali vidim da je tako ni loše na drugom svijetu, da jeste inače bi se neko dosad vratio 😇😇😂😂😂😂😂źvajz

this question is quite old, but I have the same issue at the moment and didn't find another way to silence it.

IMHO an ideal solution would be a compiler option where you can provide the the minimal compiler version that your code is compiled with. This should silence (irrelevant) ABI infos involving older compilers but still shows relevant infos.

I would like to suggest this to the gcc developers but I don't see a way to do that: I cannot create a bugzilla account, because it is not possible automatically and an email request bounces.

Navigate to the Build Phases tab of your target. Locate the Run Script phase that's triggering the warning. add this line in 'touch "${BUILT_PRODUCTS_DIR}/generated_file.txt"' Build Phase run script

In the Output Files section, click the + button to add paths to the files your script '$(BUILT_PRODUCTS_DIR)/generated_file.txt'

I have worked on many OCR architectures. I have even trained ANPR for 24 different European languages and ANPR for India. Basically there is no pre-trained recognizer for OCR of license plates. You need to train a model for that. You can choose multiple OCR architectures and see which one is the best for your application. For training the OCR model, you need to first prepare a dataset of license plate images. You can scrape online images, crop them from CCTV cameras on roads, label them manually or from OCR service like amazon or google and create a good quality dataset.

In your symfony projects directory (Using Command Line)

For shorter details

php bin/console --version

For Details (e.g. Symfony & PHP versions, Log directory, End of Life.... )

php bin/console about

Use this plugin to add JUnit 5 compatibility to your project: id(“de.mannodermaus.android-junit5”) version “1.10.0.0”

var configFolder = Path.Combine(Directory.GetCurrentDirectory(), "Configs");

foreach (var file in Directory.GetFiles(configFolder, "*.ocelot.json")) { builder.Configuration.AddJsonFile(file, optional: true, reloadOnChange: true);enter image description here }

use [email protected] its the stable code with it working fine.

import in your app module.ts -> NgxSkeletonLoaderModule.forRoot(), and in your html ->

Getting the same error , following...

I am having a similar problem. I have found a way to fix my problem but it involves some manual changes to the RESX file. Try doing a global search of your entire solution for the item name you added to resources.

When I add resources in this new editor, I add them to RESOURCEs in the options panel as you showed above. I then had to manually change the RESX file.

  <data name="Shopping" type="System.Resources.ResXFileRef, System.Windows.Forms">
<value>My Project\Resources\Shopping.txt;System.Byte[], mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>

Note the start of the clause. I added '..\' (dot dot backslash) ahead of the 'My Project' part of that. I presume that changed the reference to relative.

I had a further problem you can also see in the line. My addition was generated as a .Byte[] array even though I specified it as a Text File. All of my old references were generated as System.String. I had to change this in the RESX file entries. This is definitely a change from the old editor and it is very confusing.

My initial problem was very much like what you described. When I tried to access my added resource using My.Resources("xxxxx"), it did not work until I got the file moved into proper location. I did a lot of things to get this resolved. So many that I am not sure which one actually did the trick. I believe I did it using a drag/drop or a copy/paste in solution explorer.

Then I had the problem with it being added as a byte array. I adapted by programmatically changing the byte array to a string when I read it, then I figured out how to modify the definitions in the RESX file to be string.

  <data name="BaseDropCategories" type="System.Resources.ResXFileRef, System.Windows.Forms">
<value>..\Resources\BaseDropCategories.txt;System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>

and

        Friend ReadOnly Property BaseDropCategories() As String
        Get
            Return ResourceManager.GetString("BaseDropCategories", resourceCulture)
        End Get
    End Property

I had enough old references in my RESX file to refer to to get the entry right. (Be careful modifying your RESX file!!)

I am still processing what I've done and I experimented on another program that has no resources without success. I still would like to know WHY things now work the way they do, but I suspect some of what I did you may find usable. My additions in this program show up in the grid in the MS Resource Editor screen but are inaccessible in the only way I know at present to access it in code.

Escape the value with addcslashes:

$orConstraints = [];
$orConstraints[] = $query->like('productname',  '%' . addcslashes($name, '_%') . '%');
$orConstraints[] = $query->like('tradename','%' . addcslashes($name, '_%') . '%');

You need to determine if the request to stop/start the VM actually reaches ARM and the CRP, Whatever runbook being used, ultimately a request to start/stop the VM will be sent first to ARM and onto the CRP.

The command below can be used to start a VM.

Start-AzVM -ResourceGroupName "ResourceGroup11" -Name "VirtualMachine07"

https://learn.microsoft.com/en-us/powershell/module/az.compute/start-azvm?view=azps-13.0.0#example-1-start-a-virtual-machine

Your connection String should be like this: pyodbc.connect('DRIVER=' + driver +';SERVER=' + server +';PORT=1433' +';DATABASE=' + database +';UID=' + uid +';PWD='+ pwd + 'TrustServerCertificate=yes')

Processing algorithms are on a separate thread than QgsInterface. Accessing interface (QgsProject.instance()) from a processing algorithm works poorly and often make Qgis crash.

You should return the layer in a sink at the end of the algorithm.

I faced same issue , This is beacuse you use in bottoom navigation resizeToAvoidBottomInset: false, just remove this line from bottom navigation its work fine .

maybe a bit too late; I was faced with the same issue and the following command ensured that the tags were pushed to bitbucket cloud;

git push origin --tags

I found out the answer that is to set autoSend: false in the Generative answer kind: SearchAndSummarizeContent of the code editor. Hope that helps anyone with similar issues.

just change '@/components/HelloWorld.vue' to './components/HelloWorld.vue' change the "@" to "."

You can use a uri like this: smsto:012345678;09876523. Seperate the numbers using ;

Finally, I found a solution to this.

As of date, it is not possible to match on a "substring" in Istio's AuthorizationPolicy. You can either match with a prefix (e.g "abc*") or suffix ("*abc") but not something in the middle (e.g * abc *).

To solve this, I used an envoyFilter to generate a custom header which only contains the exact header value to match against and then used the same in the AuthorizationPolicy.

Starting an activity from background or foreground services is no longer allowed. It has been like this since Android 10.

https://developer.android.com/guide/components/activities/background-starts

I tried to execute it using your bash, but the status code returned was 403

embed = {
    "description": f"**TEST Notification** <:blackops:1327144166131630192>",
    "color": 0xa020f0,  # Replace with the desired color
}

self.discord.post(embeds=[embed])

Instead of using the ID format directly, use the format <:name:id> for non-animated emojis

My issue is also similar even after downloading all these

nltk.download('punkt')
nltk.download('wordnet')
nltk.download('omw-1.4')

It was resolved by-

text = "Finally my issue of nltk is resolved"
tokens = word_tokenize(text,language='english', preserve_line=True)

hello sir can u share your code how u r ingesting pdf. Do u have any github link about your project. I want analyz your project

The error occurs because of a version mismatch between one of your dependencies and flutter_inappwebview. The issue specifically appears in iOS builds with the error.

@nicholas_randall is correct. Update your pubspec.yaml to use the correct version of flutter_inappwebview:

flutter_inappwebview: ^6.1.0+1

Then run:

flutter clean
flutter pub get
cd ios
pod install

Why This Works:

1. flutter_inappwebview 6.1.0 and later includes updated Swift method signatures that are compatible with the latest iOS WebKit changes
2. The clean and reinstall process ensures all native dependencies are properly aligned
3. Running pod install updates the iOS native dependencies to match the new version.

If you're still having issues after updating, you might need to:

1. Delete the Pods directory in your iOS folder
2. Delete the Podfile.lock file
3. Run pod deintegrate in the iOS directory
4. Then run the above commands again

This ensures a completely clean installation of the updated dependencies.

S3 will not check if the requesting people are logged into their AWS accounts. Instead, the request must use one of the authentication methods.

If you want to share links that can be opened in a browser, pre-signed URLs are usually a good way to go. However, they expire after a maximum expiration time of 7 days. If you want longer expiration times, Cloudfront has more options to share content from S3 buckets securely.

I'm using Xcode 16 and the runtimes are now being stored in /Library/Developer/CoreSimulator/Volumes/ instead:

Thank you for all your effort. I found the answer: Use htmx:confirm instead of hx-on:submit:

<form id="assessment" name="assessment" 
    hx-post="/assessment-result.php"
    hx-target=".questions_list" 
    hx-swap="outerHTML transition:true swap:200ms" 
    hx-trigger="submit"
    hx-include=".questions_list input[type=radio]:checked">
...
</form>

document.body.addEventListener('htmx:confirm', (event) => {
        event.preventDefault();

        if( invalid ) {
            swal('Invalid form');
        }else{
            // https://htmx.org/events/#htmx:confirm
            // true to skip the built-in window.confirm()
            event.detail.issueRequest(true);
        }
});

To add upon dave.c's answer, you'll need the pooled-jms package for the pool to instantiate.

implementation("org.messaginghub:pooled-jms:3.1.7")

Try use ClassCleanupBehavior.EndOfClass in your ClassCleanup attribute.

Reference: https://github.com/microsoft/testfx/issues/580

In my case, changing GOROOT from /usr/local/go/ to /usr/lib/go/, remove the problem.

My output of go tool is:

$ go tool
addr2line
asm
buildid
cgo
...

Instead of:

$ go tool
go: no tool directory: open /usr/share/go/pkg/tool/linux_amd64: no such file or directory

Maybe it will fix your problem too.

The previous comment: "pip install "cython<3.0.0" && pip install --no-build-isolation pyyaml==5.4.1" works for me

If you encounter problems like this that are connected to a wrong sequence of you running your code cells restarting the kernel and running the cells again in correct order is in most cases good advice.

You can restart your kernel by pressing the 0 key on your keyboard twice.

Downgrading the version to this work for me:

!pip install tensorflow==2.14 tensorflow-hub==0.15

To run individual Gradle test in command line,

$ gradle test --tests "com.package.className.testMethodName"

Bro you got the solution for this?

For a taxi service MySQL database design, you should consider the following key tables:

Customers Table: Store customer information (ID, name, contact details, etc.). Drivers Table: Store driver details (ID, name, license number, vehicle details, etc.). Vehicles Table: Store vehicle details (ID, make, model, license plate, driver ID). Rides Table: Store ride details (ride ID, customer ID, driver ID, vehicle ID, pickup/drop-off locations, ride status, date/time, fare). Bookings Table: For pre-booked rides (booking ID, customer ID, driver ID, vehicle ID, scheduled time, status). Payments Table: Store payment information (payment ID, ride ID, amount, payment method, payment status). This structure helps maintain clear relationships between customers, drivers, vehicles, and rides while supporting operations like booking, payment processing, and tracking.

For professional help in designing and implementing this MySQL database for your taxi service, feel free to contact Umrah Cab Service. We offer tailored database solutions for efficient operations.

Environment Details: CopyCUDA: 11.8 PyTorch: 2.3.1

Machine 1:

• CPU: Intel(R) Core(TM) i7-9800X CPU @3.80GHz
• GPU: RTX 2080 Ti

Machine 2:

• CPU: Intel(R) Xeon(R) Gold 6138 CPU @ 2.00GHz
• GPU: RTX 3090

Let's say B (2nd row in your plot) is nested within A (first row) and C (third row) and B are crossed. Then I'd use this model:

Y ~ B/A + C * (B/A)

You first specify that B is nested within A, then the 2nd summand tells R that additionally, C should be crosse with B nested within A.

import sys
sys.path.append("/usr/lib/python3/dist-packages")
sys.path.append("/usr/lib/libreoffice/program")

# Инициализируем окружение UNO
import uno

# Импортируем необходимые компоненты
from com.sun.star.text.ControlCharacter import PARAGRAPH_BREAK
from com.sun.star.text import XTextContent
from com.sun.star.beans import PropertyValue

Hello am facing an issue in my facebook developer console, am adding my apple store application ID and its a valid one that goes by https://apps.apple.com/us/app/fudchef/id1598786433 but am getting a return error mentioning invalid ID i have also added it as https://apps.apple.com/us/app/fudchef/id1598786433?platform=iphone still showing invalid. my app has been on apple store for 3 years. Kindly advise what to do.

__global__ void run_on_gpu(int* dev_ptr, size_t size) {
    for (size_t i = 0; i < size; i++) {
        printf("%d", dev_ptr[i]);
        atomicAdd((int*)(dev_ptr + i), 1);
    }

This can be achieved as of version 0.15.0 by not supplying a name when calling add_typer. Source.

main.py

import typer
import other

app = typer.Typer()
app.add_typer(other.app)

other.py

import typer

app = typer.Typer()

@app.command()
def foo():
  pass

number one: make sure you use latest versions of node and npm. number two: install each package separately to find out which one causes the error and then troubleshoot from there.

Also clear npm cache as you do the above steps

What you can also do is delete your node_modules folder and start over by installing one package at a time

Since DBeaver version 24.3 (pic. 2), search dialog was redesigned (pic.1). Since then there is no need to change search direction, so far as this behaviour assigned to shortcut(hot key).

Hope this info would be useful for someone else =)

pic. 1

pic. 2

sudo supervisorctl stop all

sudo supervisorctl reread

sudo supervisorctl update

sudo supervisorctl start all

php artisan queue:restart

Worked for me.

Is it possible we can send hyperlink through mms not with sms

After exploring the issue further, I found a working solution that builds on the suggestion provided by Alma_Matters. Thank you for pointing me in the right direction!

Here’s the updated and improved code:

/**
 * Adds a logo to an image.
 * The logo size is set to 20% of the smaller dimension of the base image.
 * The page size is adjusted to match the image dimensions to avoid empty margins.
 * 
 * @param {Blob} imageBlob - The base image.
 * @param {Blob} logoBlob - The logo image.
 * @return {{width: number, height: number}} A merged image blob with the logo.
 */
function addLogoToImage(imageBlob, logoBlob) {
  // Get the image size
  const size = getSize(imageBlob),
    width = size.width,
    height = size.height;

  // Create a slide with the same dimensions as the image
  const slides = DocsServiceApp.createNewSlidesWithPageSize({
    title: 'temp',
    parent: Drive.Files.get("root").id,
    width: { unit: "pixel", size: width },
    height: { unit: "pixel", size: height }
  });

  // Calculate the logo size (20% of the smaller dimension)
  const minimumSize = Math.min(width, height) * 0.2;

  // Access the slide
  const presentation = SlidesApp.openById(slides);
  const slide = presentation.getSlides()[0];

  // Add the base image
  slide.insertImage(imageBlob);

  // Add the logo
  slide.insertImage(logoBlob, 10, 10, minimumSize, minimumSize);

  // Save and close the presentation
  presentation.saveAndClose();

  // Export the slide as an image
  const response = UrlFetchApp.fetch(`https://docs.google.com/presentation/d/${slides}/export/png`, {
    headers: {
      Authorization: `Bearer ${ScriptApp.getOAuthToken()}`,
    },
  });

  // Retrieve the merged image as a blob
  const mergedImage = response.getBlob();

  // Delete the temporary presentation
  Drive.Files.remove(slides);

  return mergedImage;
}

/**
 * Retrieves the dimensions of an image blob.
 * Based on code from ImgApp (https://github.com/tanaikech/ImgApp).
 * Copyright (c) 2018 Tanaike.
 * Licensed under the MIT License (https://opensource.org/licenses/MIT).
 * 
 * @param {Blob} blob - The image blob to analyze.
 * @return {{width: number, height: number}} An object containing the width and height of the image.
 */
function getSize(blob) {
  const docfile = Drive.Files.create({
    title: "size",
    mimeType: "application/vnd.google-apps.document",
  }).id;
  const img = DocumentApp.openById(docfile).insertImage(0, blob);
  Drive.Files.remove(docfile);
  return { width: img.getWidth(), height: img.getHeight() };
}

Explanation:

• I adjusted the page size to exactly match the image dimensions, avoiding any empty margins.
• The getSize function is used to retrieve the width and height of the base image. Credit: ImgApp Library Licensed under MIT.
• Added a call to saveAndClose() to finalize the changes before exporting the image.
• The function returns a blob of the merged image, so that you can perform custom operations on it later.

For this code to work properly, the DocsServiceApp library, as well as Slides and Drive services must be installed in AppsScript.

This updated code resolves the issue while ensuring the output image is clean and properly formatted.

Example of using the code:

function test() {
  var imageBlob = UrlFetchApp.fetch("https://......jpg").getBlob();
  var logoBlob = UrlFetchApp.fetch("https://.......png").getBlob();
  const mergedImage = addLogoToImage(imageBlob, logoBlob);
  DriveApp.createFile(mergedImage);
}

Disclosure: I created this code and wrote this answer myself. Since I'm not fluent in English, I used GPT to help me refine the language and ensure clarity. The ChatGPT did not touch on the content of the code itself, only the translation of the answer into English.

echo -e "o\n1" | ./your_script.sh

The -e flag enables interpretation of backslash escapes (like \n for newline)

you can simulate the above behavior with a simple script and confirm if it works in your environment

It is worked well for me

sudo /Applications/XAMPP/xamppfiles/bin/apachectl start

Apache UI automatically turned up to status running

o with specific devices. The only hint I have is that one of the devices it occurred on was a Nexus 7.

NOTE: This is not the same problem as the similar-named question by me. The other question was due to trying to use the canvas before it was available, whereas here it was available.

Below is a sample of my code:

public class GameView extends SurfaceView implements SurfaceHolder.Callback { class GameThread extends Thread { @Override public void run() { while (running) { Canvas c = null; try { c = mSurfaceHolder.lockCanvas();

                synchronized (mSurfaceHolder)
                {
                    long start = System.currentTimeMillis();
                    doDraw(c);
                    long diff = System.currentTimeMillis() - start;

                    if (diff < frameRate)
                        Thread.sleep(frameRate - diff);
                }
            } catch (InterruptedException e)
            {
            }
            finally
            {
                if (c != null)
                {
                    mSurfaceHolder.unlockCanvasAndPost(c);
                }
            }
        }
    }
}

public void surfaceCreated(SurfaceHolder holder)
{
    if (gThread.getState() == Thread.State.TERMINATED)
    {
        gThread = new GameThread(getHolder(), getContext(), getHandler());
        gThread.start();
    }
    else
    {
        gThread.start();
    }
}

}