Found on
https://www.osnews.com/story/9338/programming-the-cache-on-the-powerpc/

"On another point, there is no single proper cache flush instruction in the PowerPCs, an equivalent of the x86’s WBINVD ( Write Back and Invalidate ) so the only way to flush it is to fill it with dummy data."

"Why would you fill the caches with dummy data to flush? Never heard of DCBF, DCBI? Surely you have to go trough a loop for flushing, but no need to fill with dummy data. (BTW I feel it lot more sensible approach than the full cache flush at once.)"

I think you will have to find out the range of virtual addresses to flush and use the dcbf for each cache block.

I've discovered the problem and a solution.

In the original code, I was converting a float into a string and wanted to print out a statement if the last character of the string was a certain number:

    elif operationChoice == 6:
        if choice1 < 0:
            print(f"Evaluating the nth root of a negative number is not supported by this calculator.")
            print(f"Try again!")
            continue
        result = mathDict[6](choice1, choice2)
        if str(choice2)[-1] == "2":
            print(f"The {choice2}nd root of {choice1} equals {result}")

The problem is that the last character of a float will be AFTER the decimal point and not before.

This code appears to fix my problem and prints the output I want.

elif operationChoice == 6:
    if choice1 < 0:
        print(f"Evaluating the nth root of a negative number is not supported by this calculator.")
        print(f"Try again!")
        continue
    result = mathDict[6](choice1,int(choice2))
    placeholderValue = result
    if str(choice2)[-3] == "2":
        print(f"The {str(choice2)[0:-2]}nd root of {choice1} equals {result}")

The output for an input of 25 for choice1 and 2 for choice2 is:
The 2nd root of 25.0 equals 5.0

Check your query length settings in SSMS. I think the default size for a query's text in SSMS is 1024 characters and your length looks very close to that.

I have faced the same issue instead of running on http://0.0.0.0:8000/ i ran on http://localhost:8000/ and it worked.! I have no explanation how it worked but it worked lol. 😁

I included Klite Codec in my software install using Inno Setup and everything is working perfect

I experience the same problem, with date, number, and text fields on forms. For example, frmMainMenu has the following field:

tblData has the following fields:

The following is a simple query and the results:

SELECT tblData.Year
        , [forms].[frmMainMenu].[txtReportingSFY] AS txtReportingSFY

FROM tblData
;

Setting Year = forms!frmMainMenu!txtReportingSFY fails because the field comes through as a Japanese character.

I am unable to figure out why the Japanese character is coming through. I have found that the Format() function is an effective workaround:

have you figured this out? i'm having the same issue :/

lo que sucede es que tengo una integración con ConversationRelay, pero no logro identificar qué parámetros puedo ajustar para los tiempos de interrupción. Cuando interrumpo al agente durante la llamada, se tarda en responder a la interrupción. Este es mi inicio de ConversationRelay. Agradecería cualquier información al respecto. Además, siento que los parámetros que ajusto para la voz tampoco producen ningún cambio.

<Response>
        <Start>
            <Record action="{BASE_URL}/recording-complete" recordingStatusCallback="{BASE_URL}/recording-status" 
                   recordingStatusCallbackMethod="POST" trim="trim-silence" />
        </Start>
        <Connect>
            <ConversationRelay 
            url="{base_url_for_ws}/ws"
            ttsProvider="ElevenLabs"
            transcriptionLanguage="es-MX"
            transcriptionProvider="Deepgram"
            voice="VmejBeYhbrcTPwDniox7"
            ttsLanguage="es-MX"
            welcomeGreeting="Hola, qué tal. Soy tu asistente de ventas y te llamo para contarte sobre nuestro nuevo producto Gamma, un dispositivo inteligente para tu hogar. ¿Te gustaría conocer más detalles sobre sus funciones y beneficios?"
            welcomeGreetingInterruptible="speech"
            interruptible="speech"
            preemptible="true"
            optimize_streaming_latency="true"
            speechModel="nova-2-general"
        >
            <Language 
                code="es-MX" 
                ttsProvider="ElevenLabs" 
                voice="VmejBeYhbrcTPwDniox7" 
                elevenlabsStability="0.7"
                elevenlabsSimilarityBoost="0.7"
                elevenlabsModel="eleven_multilingual_v2"
                elevenlabsSpeed="0.7" 
                elevenlabsVolumeAdjustmentDb="1.2"  
                transcriptionProvider="Deepgram" 
                transcriptionLanguage="es-MX" 
                welcomeGreetingInterruptible="speech" 
                interruptible="speech" 
                preemptible="true"
                speechModel="nova-2-general"
                optimize_streaming_latency="true"
            />
        </ConversationRelay>
        </Connect>
    </Response>
   

The database connector you are using insists on strict hostname (CN) verification while the certificate provided by google cloud does not specify one.

You can configure your connector's ssl policy to be less restrictive, or better, use a connector provided by google cloud. For example with jdbc or r2dbc it is easiest to use https://github.com/GoogleCloudPlatform/cloud-sql-jdbc-socket-factory

Actually when you put ol or ul tags inside a p, those tags are treated by the browser as block elements and they are put aside the p tag and not inside it.

You're likely facing a runtime environment issue. The first execution triggers model downloads and widget rendering. If you're using Jupyter/Colab, the frontend may not be fully ready, causing display errors. Once cached, the second run works smoothly.

This might help:

• Isolate model loading in a separate cell or script.

• Add simple print logs to track download/init time.

• Run in a standard Python script (e.g., VS Code terminal) to avoid frontend rendering issues.

This is a classic case of execution environment quirks,, similar to what you'd encounter when debugging backend issues in server-side apps. If you're into that sort of thing, this quick read offers a good debugging mindset.

After Communicating with Microsoft, this was a security fix released on Microsoft Reporting Services (SSRS) version "16.0.9101.19239" (Product Version: 16.0.1116.38) on "2025/01/06"

• Information can be found here: https://learn.microsoft.com/en-us/sql/reporting-services/release-notes-reporting-services?view=sql-server-ver16#160910119239-20250106

Changed default SupportedHyperlinkSchemes advanced server property value to disallow JavaScript

to address it:

1. Connect to Server via SSMS

• open SSMS
• set "Server Type" to "Reporting Services"
• set Server name as "[Servername or localhost]\[SSRS INSTANCE NAME]" (example: SQL\SSRS)
• set Authentication as needed (usually Windows Authentication)

3. Set Server Properties

• Open Server Properties (Right-click on the Server > Properties)
• Go to Security Tab
• set "SupportedHyperlinkSchemes" to "*" (without "") - this will allow all URLs. if you have specific hyperlink schemes in use, you can put them here instead.

4. Restart SSRS

Please, check my own SPA PHP CMS here Demo

Admin area

Download

It looks like the spl package is separate from solana, so you should just be able to do from spl.token import instructions.

I looked at how it was used in tests at https://github.com/michaelhly/solana-py/blob/669055a8945739f04d131310b2e78bc619fce54d/tests/integration/test_token_client.py#L7

When a device or group is created do you see it’s representative at mongodb?

it seems iota is not using mongo to store device config data (however it seems to be correctly configure at first sight).

Try to use a similar approach used in BlissRoms:

android_library_import {
    name: "glide",
    aars: ["libs/glide-4.9.0.aar"],
}

1. https://review.blissroms.org/plugins/gitiles/platform_packages_apps_Settings/+/refs/heads/arcadia-next/Android.bp

2. https://review.blissroms.org/plugins/gitiles/platform_packages_apps_Settings/+/refs/heads/arcadia-next/libs/

extensions_dict = {
    "mp4": {"type": "video", "codec": ["libx264", "libmpeg4", "aac"]},
    "mkv": {"type": "video", "codec": ["libx264", "libmpeg4", "aac"]},
    "ogv": {"type": "video", "codec": ["libtheora"]},
    "webm": {"type": "video", "codec": ["libvpx"]},
    "avi": {"type": "video"},
    "mov": {"type": "video", "codec": ["libx264", "prores"]},
    "ogg": {"type": "audio", "codec": ["libvorbis"]},
    "mp3": {"type": "audio", "codec": ["libmp3lame"]},
    "wav": {"type": "audio", "codec": ["pcm_s16le", "pcm_s24le", "pcm_s32le"]},
    "m4a": {"type": "audio", "codec": ["libfdk_aac"]},
    "flac": {"type": "audio", "codec": ["flac"]},
}

There is no "hevc_nvenc" codec in moviepy source code. How are you even using it.

Check it yourself -
https://github.com/Zulko/moviepy/blob/master/moviepy/tools.py
https://github.com/Zulko/moviepy/blob/master/moviepy/video/VideoClip.py

if should raise a key error.

if codec is None:
            try:
                codec = extensions_dict[ext]["codec"][0]
            except KeyError:
                raise ValueError(
                    "MoviePy couldn't find the codec associated "
                    "with the filename. Provide the 'codec' "
                    "parameter in write_videofile."
                )

You can set the username this way. Set it an anonymous value.

InternalWorkbook iwb = wb.getInternalWorkbook();
iwb.getWriteAccess().setUsername("username");

Thank you, aw3!
It works! Really happy about the solution.

Update requested by Kristof Bergé...
--------------------------------------------

It could perhaps be a bit confusing, but I wrote the question for the "Dashboard" page but I tried out the answer for a page named "MainPage".

XMAL code

<ContentPage xmlns="http://schemas.microsoft.com/dotnet/2021/maui"
             xmlns:x="http://schemas.microsoft.com/winfx/2009/xaml"
             xmlns:viewmodel="clr-namespace:SleepDiaryViewModel.ViewModels;assembly=SleepDiaryViewModel"
             x:DataType="viewmodel:MainPageViewModel"
             x:Class="SleepDiary.MainPage"
             xmlns:toolkit="http://schemas.microsoft.com/dotnet/2022/maui/toolkit">

    <ContentPage.BindingContext>
        <viewmodel:MainPageViewModel />
    </ContentPage.BindingContext>
    
    <ScrollView>
        <VerticalStackLayout>
            <Label 
                HorizontalOptions="Start"
                VerticalOptions="Center"
                Text="{Binding Test}"
                TextColor="Green"
                FontSize="Title"/>
        </VerticalStackLayout>
    </ScrollView>
</ContentPage>

.CS-file (I have left out unneccesary code)

public partial class MainPage : ContentPage
{

    protected override void OnAppearing()
    {
        (BindingContext as MainPageViewModel).ReloadData();

        base.OnAppearing();
    }

    public MainPage()
    {
        InitializeComponent();
        BindingContext = new SleepDiaryViewModel.ViewModels.MainPageViewModel();
    }
}

Alright, I guess I didn't check enough beforehand:

https://discord.com/developers/docs/reference#snowflakes

This article clearly explains that IDs are implemented as Snowflakes and are unsigned long integers.

check out this https://learn.microsoft.com/en-us/cpp/c-runtime-library/crt-library-features?view=msvc-170

first, it says that UCRT is linked dynamically. second, there are 2 more libraries that compose the CRT

so, ill try to guess:

• without entry, builtins (default libs) are on, initialization code injected, everything builds fine.

• no builtins, memcpy() is declared, but UCRT doesnt have memcpy() so linker skips attaching it and fails.

• no builtins, memcpy_s() is implemented in UCRT, linker attaches UCRT that is special default lib that requires initialization so it attaches other libraries (msvcrt, vcruntime) that has memcpy() so the thing, again, builds fine.

The issue in my case was that i returned vertex positions as vec4(position, 0.0). I should have returned vec4(position, 1.0) instead. As per specs, a dynamic error occurs if w is 0. This error could not be captured though, and causes everything to fail silently.

it's just simple answer from the feature, this can be caused by connected to more than one emulator or devices on the same pc/laptop, so my answer is easy:
Just use `-s`

Like:
`adb -s emulator-5554 shell/install/pull/`

This turned out to be a misconfiguration, not loading .env where it should have been loaded.

.env is loaded in settings.py (django)

But .env was not loaded in celery.py as it was assumed to be loaded already. This seems not always the case.  Sometimes celery.py is run from an _init_ script while .env is not loaded.

This causes celery to run without a valid broker URL, which causes network issues. These network issues cause problems for .delay() and .delay_on_commit()

Did you find a solution for this?

import { generateHTML, parseHTML } from '@payloadcms/richtext-lexical';

// Convert Lexical JSON to HTML:

const html = await generateHTML(lexicalStateJSON, editorConfig);

// Convert HTML to Lexical JSON:

const lexicalJSON = await parseHTML(html, editorConfig);

Here is a great way to get started with a pretty comprehensive list of view modifiers.

In a web browser, go to X.com and the grow tab. Type in "compile a list of of all swiftUI view modifiers"

This will give you this:

See new posts

compile a list of of all swiftUI view modifiers

1 post

15 web pages

Compiling a complete list of all SwiftUI view modifiers is challenging because Apple’s SwiftUI framework evolves with each iOS, macOS, watchOS, and tvOS release, and the official documentation doesn’t provide a single, exhaustive list in one place. Additionally, new modifiers are introduced, and existing ones may be deprecated or modified. However, I can provide a comprehensive list of commonly used SwiftUI view modifiers based on the latest available documentation (up to SwiftUI 5.0, iOS 18, macOS 15, etc., as of my knowledge cutoff) and categorize them for clarity. This list draws from Apple’s official documentation, community resources, and practical usage patterns.

Note that SwiftUI view modifiers are methods applied to views to customize their appearance, behavior, or structure, returning a new view instance. They are chainable and can be applied to any type conforming to the View protocol. Some modifiers are specific to certain view types (e.g., Text), while others are broadly applicable. For a definitive reference, you can explore Apple’s documentation for the View protocol or use Xcode’s autocomplete feature (by typing . after a view) to discover available modifiers.

Below is a categorized list of key SwiftUI view modifiers, grouped by their primary function. I’ll include a brief description of each where relevant. Since the list is extensive, I’ll focus on the most commonly used and notable modifiers, ensuring it’s practical rather than overwhelming. If you need details on a specific modifier or category, let me know, and I can expand!

1. Appearance and Styling Modifiers

These modifiers adjust the visual appearance of views, such as colors, fonts, and shapes.

.foregroundStyle(_:): Sets the foreground color or material for text, shapes, or other content. Supports colors, gradients, or materials. Example: .foregroundStyle(.blue)

.background(_:alignment:): Applies a background view, color, or material behind the view. Example: .background(.red)

.font(_:): Sets the font style and size for text. Example: .font(.title)

.fontWeight(_:): Adjusts the weight of the font (e.g., bold, regular). Example: .fontWeight(.bold)

.bold(): Applies bold styling to text. Example: .bold()

.italic(): Applies italic styling to text.

.strikethrough(_:color:): Adds a strikethrough to text. Example: .strikethrough(true, color: .red)

.underline(_:color:): Adds an underline to text. Example: .underline(true, color: .blue)

.tint(_:): Applies a tint color to interactive elements like buttons or controls. Example: .tint(.purple)

.opacity(_:): Sets the transparency of the view. Example: .opacity(0.5)

.brightness(_:): Adjusts the brightness of the view’s content.

.contrast(_:): Adjusts the contrast of the view’s content.

.saturation(_:): Adjusts the color saturation of the view.

.grayscale(_:): Applies a grayscale effect to the view.

.blendMode(_:): Sets how the view blends with its background. Example: .blendMode(.multiply)

.colorInvert(): Inverts the colors of the view.

.colorMultiply(_:): Multiplies the view’s colors with a specified color.

.shadow(color:radius:x:y:): Adds a shadow to the view. Example: .shadow(radius: 10)

.clipShape(_:style:): Clips the view to a specific shape. Example: .clipShape(Circle())

.clipped(antialiased:): Clips the view to its bounds, optionally with antialiasing.

.cornerRadius(_:antialiased:): Rounds the corners of the view. Example: .cornerRadius(10)

.border(_:width:): Adds a border around the view. Example: .border(.black, width: 2)

.overlay(_:alignment:): Places a view on top of the current view. Example: .overlay(Circle().stroke())

.mask(_:): Masks the view with another view or shape. Example: .mask(Circle())

.compositingGroup(): Groups the view’s rendering to apply effects uniformly.

.drawingGroup(opaque:): Renders the view as a single layer, improving performance for complex views.

2. Layout and Positioning Modifiers

These modifiers control the size, position, and alignment of views within their parent.

.frame(width:height:alignment:): Sets the view’s size and alignment. Example: .frame(width: 100, height: 100)

.fixedSize(horizontal:vertical:): Prevents the view from resizing to fit its container.

.aspectRatio(_:contentMode:): Sets the aspect ratio of the view. Example: .aspectRatio(16/9, contentMode: .fit)

.scaledToFit(): Scales the view to fit its parent while maintaining aspect ratio.

.scaledToFill(): Scales the view to fill its parent, potentially cropping content.

.padding(_:): Adds padding around the view. Example: .padding(10)

.offset(x:y:): Shifts the view by x and y coordinates. Example: .offset(x: 10, y: 20)

.position(x:y:): Sets the absolute position of the view’s center.

.alignmentGuide(_:computeValue:): Customizes the alignment of the view within its parent.

.zIndex(_:): Sets the stacking order of the view. Example: .zIndex(1)

.layoutPriority(_:): Sets the priority for the view’s layout in flexible containers.

.ignoresSafeArea(_:edges:): Allows the view to extend into safe areas. Example: .ignoresSafeArea()

.safeAreaInset(edge:alignment:spacing:content:): Adds content to safe area edges (iOS 15+).

.coordinateSpace(_:): Defines a named coordinate space for the view.

.transformEffect(_:): Applies a 2D or 3D transformation to the view.

3. Interaction and Gesture Modifiers

These modifiers handle user interactions and gestures.

.onTapGesture(count:perform:): Adds a tap gesture. Example: .onTapGesture { print("Tapped") }

.onLongPressGesture(minimumDuration:perform:): Adds a long-press gesture.

.gesture(_:including:): Attaches a gesture to the view (e.g., DragGesture, PinchGesture).

.simultaneousGesture(_:including:): Allows multiple gestures to be recognized simultaneously.

.highPriorityGesture(_:including:): Prioritizes a gesture over others.

.onAppear(perform:): Executes code when the view appears.

.onDisappear(perform:): Executes code when the view disappears.

.onChange(of:perform:): Responds to changes in a value (iOS 14+). Example: .onChange(of: value) { print($0) }

.onSubmit(of:perform:): Handles submission events (e.g., for text fields, iOS 15+).

.allowsHitTesting(_:): Enables or disables user interaction. Example: .allowsHitTesting(false)

.contentShape(_:eoFill:): Defines the hit-testing shape for the view.

.focusable(_:): Makes the view focusable for keyboard or TV remote (macOS, tvOS).

.onHover(perform:): Responds to hover events (macOS, iPadOS).

.onDrag(_:): Enables drag-and-drop for the view.

.onDrop(of:delegate:): Handles dropped items in drag-and-drop.

4. Animation and Transition Modifiers

These modifiers control animations and transitions for view changes.

.animation(_:value:): Animates changes to a view based on a value. Example: .animation(.spring(), value: isOn)

.transition(_:): Defines how a view appears or disappears (e.g., .slide, .opacity).

.matchedGeometryEffect(id:in:properties:): Animates transitions between views with a shared ID (iOS 14+).

.scaleEffect(_:anchor:): Scales the view. Example: .scaleEffect(2)

.rotationEffect(_:anchor:): Rotates the view by an angle. Example: .rotationEffect(.degrees(45))

.rotation3DEffect(_:axis:anchor:): Applies a 3D rotation.

.offsetEffect(_:): Animates the view’s offset for effects like shake.

.symbolEffect(_:options:): Applies effects to SF Symbols (iOS 17+).

5. Accessibility Modifiers

These modifiers enhance the accessibility of views for users with disabilities.

.accessibilityLabel(_:): Sets a label for screen readers. Example: .accessibilityLabel("Button")

.accessibilityHint(_:): Provides a hint for the view’s action.

.accessibilityValue(_:): Sets a value for the view (e.g., for sliders).

.accessibilityAddTraits(_:): Adds accessibility traits (e.g., .isButton).

.accessibilityRemoveTraits(_:): Removes accessibility traits.

.accessibilityHidden(_:): Hides the view from accessibility.

.accessibilityAction(_:): Adds a custom accessibility action.

.accessibilityAdjustableAction(_:): Supports adjustable actions (e.g., for sliders).

.accessibilitySortPriority(_:): Sets the order for accessibility elements.

6. Navigation and Presentation Modifiers

These modifiers manage navigation and presentation of views.

.navigationTitle(_:): Sets the title for a navigation bar. Example: .navigationTitle("Home")

.navigationBarTitleDisplayMode(_:): Controls the display mode (e.g., .inline, .large).

.toolbar(_:): Adds toolbar items to the view. Example: .toolbar { ToolbarItem { Button("Add") {} } }

.sheet(isPresented:content:): Presents a modal sheet. Example: .sheet(isPresented: $showSheet) { Text("Sheet") }

.fullScreenCover(isPresented:content:): Presents a full-screen modal.

.popover(isPresented:content:): Presents a popover (iPad, macOS).

.alert(_:isPresented:presenting:actions:message:): Shows an alert. Example: .alert("Error", isPresented: $showAlert) { Button("OK") {} }

.confirmationDialog(_:isPresented:presenting:actions:): Shows a confirmation dialog (iOS 15+).

.navigationDestination(isPresented:destination:): Presents a destination view (iOS 16+).

.inspector(isPresented:content:): Shows an inspector panel (macOS, iOS 16+).

7. Text and Input Modifiers

These are specific to Text, TextField, or other input views.

.textFieldStyle(_:): Sets the style for text fields. Example: .textFieldStyle(.roundedBorder)

.keyboardType(_:): Sets the keyboard type for text input. Example: .keyboardType(.emailAddress)

.textContentType(_:): Optimizes the keyboard for specific input (e.g., .emailAddress).

.autocapitalization(_:): Controls text capitalization (iOS 15+: .autocapitalization deprecated, use .textInputAutocapitalization).

.textInputAutocapitalization(_:): Sets autocapitalization behavior (iOS 15+).

.disableAutocorrection(_:): Enables or disables autocorrection.

.lineLimit(_:): Limits the number of lines for text. Example: .lineLimit(2)

.truncationMode(_:): Sets text truncation behavior (e.g., .tail, .middle).

.minimumScaleFactor(_:): Sets the minimum text scaling factor.

.textCase(_:): Forces text to uppercase or lowercase. Example: .textCase(.uppercase)

.multilineTextAlignment(_:): Aligns multiline text (e.g., .center).

8. Environment and Context Modifiers

These modifiers interact with the SwiftUI environment or context.

.environment(_:): Injects a value into the environment. Example: .environment(\.colorScheme, .dark)

.environmentObject(_:): Shares an object with child views.

.transformEnvironment(_:transform:): Modifies an environment value.

.preference(key:value:): Passes a preference value up the view hierarchy.

.onPreferenceChange(_:perform:): Responds to preference value changes.

.statusBarHidden(_:): Hides or shows the status bar (iOS).

.controlGroupStyle(_:): Sets the style for control groups (macOS, iOS 15+).

.dynamicTypeSize(_:): Sets the dynamic type size for accessibility.

9. Performance and Rendering Modifiers

These optimize rendering or control view updates.

.redacted(reason:): Redacts the view for privacy (e.g., .placeholder).

.unredacted(): Removes redaction from a view.

.allowsTightening(_:): Enables text tightening for better layout.

.drawingGroup(opaque:): Renders the view as a single layer for performance.

.transaction(_:): Customizes animations or transactions for a view.

10. Conditional and Custom Modifiers

These involve logic or custom behavior.

.if(_:transform:): Conditionally applies a modifier (often used in extensions).

.modifier(_:): Applies a custom view modifier. Example: .modifier(MyCustomModifier())

.disabled(_:): Disables interaction with the view. Example: .disabled(true)

.hidden(): Hides the view without removing it from the layout.

.deleteDisabled(_:): Disables deletion in lists.

.moveDisabled(_:): Disables reordering in lists.

Notes and Tips

Discovering Modifiers: To explore all available modifiers, use Xcode’s autocomplete by typing . after a view (e.g., Text("Hello").). This shows context-sensitive modifiers.

Custom Modifiers: You can create custom view modifiers by conforming to the ViewModifier protocol, encapsulating reusable styling or behavior. Example: struct MyStyle: ViewModifier { func body(content: Content) -> some View { content.padding().background(.blue) } }

Platform-Specific Modifiers: Some modifiers are platform-specific (e.g., .statusBarHidden for iOS, .focusable for tvOS/macOS). Check Apple’s documentation for compatibility.

Order Matters: The order of modifiers can affect the result due to SwiftUI’s view composition. For example, .padding().background(.red) differs from .background(.red).padding().

Documentation: Apple’s View protocol documentation is the best source for an up-to-date list, though it’s organized by functionality rather than as a single list.

Community Resources: Posts on X highlight tools like the SwiftUI Index/Changelog by @kuba_suder

, which auto-generates an alphabetical index of views and modifiers from Apple’s docs.

Limitations

This list covers the majority of SwiftUI view modifiers as of iOS 18/macOS 15, but it may not include every niche or recently introduced modifier, especially those tied to specific view types (e.g., Map, Chart) or new features in 2024/2025 releases. Apple’s documentation is the authoritative source, but it requires navigating the View protocol and related types. If you’re looking for a specific modifier or need a programmatically generated list, you might need to parse Apple’s documentation or use a tool like the SwiftUI Index mentioned on X.

If you want me to:

Expand on a specific category or modifier,

Provide code examples for any modifier,

Generate a custom view modifier,

Or check for updates to this list using web or X searches,

just let me know!

Grox rocks.

I did the "hardwork" going through all special characters in ERE,PERL (I hope)

in /usr/local/bin/ssed

#!/bin/sh

file="$1"

if [ -n "$file" ]; then
  sed "s#[@/\^.$|()[*+?{}\#,&=:~]\|-\|\]#\\\&#g" "$file"
else
  sed "s#[@/\^.$|()[*+?{}\#,&=:~]\|-\|\]#\\\&#g"
fi

Example Usage:

$ grep '^[^#]' mirrorlist | ssed | xargs -d'\n' -I{} sed -i '/{}/ s/#//' mirrorlist.pacnew 

In this case I needed to go through all urls in mirrorlist.pacnew and uncomment those which are in mirrorlist uncommented.

I realized that the problem is occuring because my project was hosted in a local directory, and the file loading mechanism only works when its hosted on a server. I did not know this, I thought file loading happens on local directories too

i can't comment on your question yet :(

you have here a a situation similar to yours being discussed:

Github

Have only 1 for-each@section for members. Then have a table with two rows. Each row the size of one page. Have the Table Properties/Row/Allow to break across pages un-checked for each row.

Found it here, basically it comes with yet another package pip install azure-mgmt-keyvault and then:

def main():
    client = KeyVaultManagementClient(
        credential=DefaultAzureCredential(),
        subscription_id="00000000-0000-0000-0000-000000000000",
    )

    response = client.vaults.list()
    for item in response:
        print(item)

Source: https://learn.microsoft.com/en-us/rest/api/keyvault/keyvault/vaults/list?view=rest-keyvault-keyvault-2022-07-01&tabs=Python

Ok So I found a way, just in case someone else is also looking for an answer.

Microsoft's owner OrganizationID is found in this link - EntraID Microsoft Apps | Microsoft Learn

I filtered the apps with this ID.

Since this was a top search result for this issue here’s an update for 2025:

There’s now an expandToScroll modal interfaceOption in Ionic 8:

Sheet modals can be configured to allow scrolling content at all breakpoints
https://ionicframework.com/docs/api/modal#scrolling-content-at-all-breakpoints

Try

val discriminator: Expr[Int] = '{ $discriminatorCriteriaExpr.getFor[headType & A] }

or

case Some('{ $m: Mirror.SumOf[A] {type MirroredElemTypes = elemTypes} }) =>
  '{ tag[elemTypes] } match {
    case '{
      type headType <: A
      tag[`headType` *: tailTypes]
    } =>

where

def tag[A] = ???

Explicit type conversion in Scala 3 macros

What Scala 3 syntax can match on a Type and its Type parameters in the context of a macro?

Based on the answer of @chqrlie I ended up with following simplification that basically solves what I wanted to solve:

if (!Is_sup_sz(SZ_L(d))) { return EXEC_ERROR_INVALID_OP_SZ; }
switch (LAYOUT(d)) {
    case Ops_layout_Reg2:
        Reg_set(&REG_L(s,d), &REG_R(s,d), SZ_L(d));
        break;
    case Ops_layout_RegImm:
        Reg_set(&REG_L(s,d), &IMM1(d), SZ_L(d));
        break;
    case Ops_layout_Imm2:
    case Ops_layout_ImmReg:
    default: return EXEC_ERROR_INVALID_3ADDR_OPS_LAYOUT;
}
return EXEC_CORRECT;

where 2 additional functions resolve what part of Cell16 (renamed to just Cell) is to be modified and what operand size is correct to be processed using compile time constant:

#define SUP_SZ_MASK (uint8_t)0x18 // 0b00011000 only 8/16 bit.

inline bool Is_sup_sz(Op_sz sz) {
    return (sz != 0) && ((sz & (sz - 1)) == 0) && ((sz & SUP_SZ_MASK) != 0);
}

inline void Reg_set(Cell *dest, const Cell *src, Op_sz sz) {
    // Formula guarantees no overflow even for uint64_t.
    uint16_t mask_right  = (((1 << (sz - 1)) - 1) << 1) + 1, 
             mask_left = ~mask_right;
    // Only work with widest value of Cell.
    dest->sz16 &= mask_left;
    dest->sz16 |= (src->sz16 & mask_right);
}

I decided to not replace union Cell with just uint16_t because I want variables that model registers to be addressable as real registers are like (RAX/EAX)/AX/AL (no AH tho).

ааа всё, ПОНЯЛ.... Запятая перед закр. скобкой ну совсем не нужна... всем спасибки)))

I had this same issue. I deleted my package-lock.json and node_modules, then reinstalled dependencies. Error was resolved

"huidu.sdk" where can I find this file? I cannot find it anywhere. Can anybody help me?

In my case someone earlier had configured our apps package name as com.xxx.xxx.xxx which has 4 seperate identifiers.

I don't think it is mentioned anywhere in Google's docs that a package name with 4 identifiers is invalid but changing it with 3 identifiers helped fix this issue.

So try having a package name with identifiers i.e. com.example.app.

I am getting the following error while using st_theme with latest streamlit version (1.45). May I know how to fix this?

 theme = st_theme()["base"] # either 'light' or 'dark'
 print("theme: {0}".format(theme))

Error is:

StreamlitDuplicateElementId: There are multiple `component_instance` elements with the

same auto-generated ID. When this element is created, it is assigned an internal ID

based on the element type and provided parameters. Multiple elements with the same type

and parameters will cause this error.

As you may be aware by looking at it in design view, a split form is in fact a modified single form.

For that reason, I don't believe it is possible to achieve what you want using VBA. There are many limitations in what you can do due to the way that built-in split forms are designed. These include several different display issues, runtime issues and code issues. See Split Form Issues for details

I would recommend you replace it with your own form that has similar functionality but allows you more control over the layout. The above article also includes links to several alternatives.

I spent too much time focusing on the .NET upgrade and the project file, and not enough time comparing the nuget packages. Development Dependency was selected and that was causing my problems. I un-checked it and my problems went away (along with these extra options in the project file).

This is how to solve the issue on the messaging module example.

1. Use this type of the import:

import { getMessaging, requestPermission, setBackgroundMessageHandler, onMessage, getToken, onNotificationOpenedApp, getInitialNotification, subscribeToTopic, hasPermission } from '@react-native-firebase/messaging';

2. Remove all messaging() calls and use imported methods directly. All of them (except getMessaging) require first additional argument: messaging instance.

Old code:

messaging().getInitialNotification().then(message => this.catchMessage(message));
var token = await messaging().getToken();

New code:

const messagingInstance = getMessaging();

getInitialNotification(messagingInstance).then(message => this.catchMessage(message));
var token = await getToken(messagingInstance);

Big example code is given here: https://github.com/invertase/react-native-firebase/issues/8282#issuecomment-2760400136

I get the same problem but it is not that I have run out of credits. It just randomly started happening and I can't seem to get it working even if i replace the key. Initially it stopped working when i was using it as part of the task-master MCP.

Your import and traversal initialization looks different compared to the python driver example here https://github.com/apache/tinkerpop/blob/3.7-dev/gremlin-python/src/main/python/examples/connections.py. Does it work if you change your code to be consistent with the example?

from gremlin_python.process.anonymous_traversal import traversal
from gremlin_python.driver.driver_remote_connection import DriverRemoteConnection

rc = DriverRemoteConnection('ws://localhost:8182/gremlin', 'g')
g = traversal().with_remote(rc)

I have seen Lua data structure files with a function call followed by a table, as in:

ordered() { a=1, b=2 }

Or nested:

ordered() { a=1, b=2, ordered() {c=3} }

Is this a function call with a single table argument to a function named ordered?

I am trying to understand how ‘ordered’ function is defined.

il faut ajouter un language de backend et si tu as un seul utilisateur il faut juste ajouter une condition de ce user

For anyone looking how to get rid of this nasty blue border on macOS:

tableView.focusRingType = .none

I have the same issue so obviously this is not industry standard. Original issue is Version 0 (not 1), first revision is version is Version 1 (not 2), second revision is version 2 (not3).....and so on.

Is there any update on this issue? I am facing the similar issue in my Flutter project but this time its with Publishable Key

Since this was a top search result for this issue here’s an update for 2025:

There’s now an expandToScroll modal interfaceOption in Ionic 8:

Sheet modals can be configured to allow scrolling content at all breakpoints
https://ionicframework.com/docs/api/modal#scrolling-content-at-all-breakpoints

This is possible with the new mapConcurrent method

public static <T, R> Gatherer<T, ?, R> mapConcurrent(int maxConcurrency, 
            Function<? super T, ? extends R> mapper)

so you would write something like this

paths.gather(Gatherers.mapConcurrent(100, p -> p))
    .filter(Files::isRegularFile)
    .filter(p -> p.toString().endsWith(".jpeg") || p.toString().endsWith(".jpg"))
    .forEach(this::resizeAndSaveImage);

Source: https://www.theserverside.com/tip/How-to-use-parallel-streams-in-Java-with-virtual-threads

I am also facing the same issue i am using videosdk that uses webRTC internally and as soon as i archive a build after adding the package my app simply crashes on IOS real device nothing happens on Simulator app runs completely fine on simulator but crashes on real device as soon as flutter engine gets initialised.

Here's the warning in XCode i thought i can ignore it but it causes the application to crash straight as soon as it gets launched without any descriptive error log and error was pretty hard to find the project was large and i had to do about 5-6 days of debugging to find out that this was the culprit. Haven't found any other issue yet related to it.

I got this with empty folder where try files is attempted (no index.html found)

On their post, they suggest building FFmpegKit locally and using the created binaries in our applications. You've got the instructions here

The latest Beam (2.64.0) Python SDK added a new feature --files_to_stage (https://github.com/apache/beam/pull/34208). This will stage any files under /tmp/staged on each Dataflow worker.

See here... and search for "PrimaryKey["

The fix seems to be upgrading to Bazel 8.2.0 - no other changes required.

From the answers it seems like I should be doing:

import Foundation
import SwiftUI

@Observable class MyBindings2 {
    var isDisabled:Bool = false
}
    
struct ContentView: View {
    @Bindable var mb:MyBindings2
    
    func action() {
        mb.isDisabled = true
        Task {
            try await Task.sleep(nanoseconds: 1_000_000_000)
            mb.isDisabled = false
        }
    }
    
    var body: some View {
        VStack {
            Button(action:action){Text("Click Me")}.padding(10)
            Button(action:action){Text("or Me")}.padding(10)
            Button(action:action){Text("or Maybe Me")}.padding(10)
            Text(String(mb.isDisabled))
            Text("^^^")
            Text("at some point this is false but the View is disabled")
        }.disabled(mb.isDisabled)
    }
}

I am still trying to convert all of my code to this setup, and since the error is intermittent, I guess I have some testing to do. Thanks to all

Consider to use Cro::HTTP::Request and the query-hash function … https://cro.raku.org/docs/reference/cro-http-request, specifically URLs in the wild have some quirks and it is quite tricky to roll your own robust implementation

I realize this is a really old thread, but it seems that nobody caught the actual issue.

The @model declaration is missing a closing >. The Tuple<> has opening and closing angle brackets, and so does the List<>. There is no closing angle bracket for the tuple. That's why it wasn't compiling.

The error is about you need to install a compatible version of Java to your machine, I recommend use sdkman and set the JAVA_HOME env var.

A response on this thread helped me.

I got round it by manually going to https://aka.ms/mysecurityinfo in Edge and confirming my contact details (that's all it wanted me to do)

first of all you need mapping table for using which value is matching between mt messages and mx messages. Then you also need path message for creating mx xml.

This question was discussed and answered at https://github.com/manoharan-lab/holopy/issues/440 . In short, ADDA requires compiler environment to be installed on Windows. Alternatively, pre-built binaries may be used.

Edge WebDriver and Edge browser versions are incompatible.

try:

1. Ensure an exact version match between Edge and EdgeDriver.

2. Update Selenium to the latest version.

3. Avoid --headless temporarily

It is not implemented in the SparkRunner at the time I am making this comment.

You can follow https://github.com/apache/beam/issues/22524 which is a feature request ticket to implement it.

I found that ticket by browsing the code to understand the status - it is linked from https://github.com/apache/beam/blob/5e29867ba53d940e6d5a2e0fdc25a883ab1547de/runners/spark/src/main/java/org/apache/beam/runners/spark/translation/TransformTranslator.java#L409. (contributions welcome!)

Here's an easy workaround: even if you see "App URL has already been claimed," just click next. You can add your link later and create your Placement ID to use it for now.

You should place your image file and html file in the same folder.

just to clarify, are you trying to calculate the number of consecutive days an issue has occurred for a specific well using Spotfire expressions?

Pravallika you answer is very useful, however, there is a field inside the Identity Provider I cannot set. The field is: "Client application requirement", I tried all possible combination inside the "identityProviders" in the template. I know you could add similar information inside "appSettings" too, but still without luck. Do you know what could be the solution?

I did find a way around with this code (from https://alexknyshov.github.io/R/page3.html):

tree2$edge.length[which(!(tree2$edge[,1] %in% tree2$edge[,2]))] <- sum(tree2$edge.length[which(!(tree2$edge[,1] %in% tree2$edge[,2]))])/2

And a deeper explanation on why the root appears this way when using the ape::root function can be found here:

https://github.com/emmanuelparadis/ape/issues/143

It's o ly one a day it's a test tho not sure what you get for helping .? Let me no more info please

I have developed this library in python that correspond of your needs

https://github.com/sylvainmouquet/antpathmatcher

Things have upgraded. Just create an action environment in vRO now and add the module you want to use (supports Python, Node.js and PowerShell) and you are good to use it (https://cloudblogger.co.in/2022/07/20/getting-started-vrealize-orchestrator-script-environments-cb10098/). See the image on how to add a Node.js module quickly to vRO. If your vRO is in restricted environment with limited connectivity, you can also use zip bindles (https://cloudblogger.co.in/2023/02/18/run-a-simple-custom-python-script-in-vro-cb10106/).

I got a similar error on my mac when I tried to install the faiss-cpu 1.11.0. Then it worked when I installed 1.10.0 version instead (pip install faiss-cpu==1.10.0)

As of .NET 9 the preferred way to get the current app full path is:

Environment.ProcessPath

Implement a CAPL script that blinks an LED every 1 second when a 'Blink_Enable' signal is set to 1, and stops blinking when set to 0.

the TOP clause does not have a hardcoded maximum limit on the number of rows you can specify.

The actual limit is constrained by:

• Available system memory

• Query performance

• The total number of rows in the result set or source table

  If you specify a value larger than the number of available rows, SQL Server will simply return all available rows.

I just solved this problem in a script where I also connected to Azure AD and PnP Online, just by connecting to Microsoft Graph first.

Try to remove the with block:

    With OvenArray(OvenNum).Cells(3, 4)
        .NumberFormat = "@"
        .value = FixArray(count - 1, 2)
    End With

OvenArray(OvenNum).Cells(3, 4).NumberFormat = "@"
OvenArray(OvenNum).Cells(3, 4).value = FixArray(count - 1, 2)

For me, "Reset Package Caches" was not clickable.
What worked instead was:

1. Go to Xcode

2. In the General tab, scroll down to Frameworks, Libraries, and Embedded Content.

3. Find the package(s) mentioned in the error.

4. Remove them by selecting the item and clicking the minus (-) button.

Source: GitHub Firebase iOS SDK Discussion

Thanks to what @mehdi-sahraei suggested, I changed the dtype to None and this permitted to parse other rows (any row after the header line) correctly. Finally, it seems that there is no bug about how the header line is treated but rather a lack of clarity in the documentation. As indicated in my original post, the documentation says:

... if the optional argument names=True, the first commented line will be examined for names ...

But what the documentation doesn't tell you, is that in that case, the detected header is stored in dtype.names and not beside other rows that come after the header in the file. So the header line is actually there but it is not directly accessible like other rows in the file. Here is a working test case for those who might be interested to check how this works in preactice:

C:\tmp\data.txt

#firstName|LastName
Anthony|Quinn
Harry|POTTER
George|WASHINGTON

And the program:

with open("C:/tmp/data.txt", "r", encoding="UTF-8") as fd:
    result = np.genfromtxt(
        fd,
        delimiter="|",
        comments="#",
        dtype=None,
        names=True,
        skip_header=0,
        autostrip=True,
    )
    print(f"result = {result}\n\n")

print("".join([
    "After parsing the file entirely, the detected ", "header line is: ",
    f"{result.dtype.names}"
]))

Which gives the expected result:

result = [('Anthony', 'Quinn') ('Harry', 'POTTER') ('George', 'WASHINGTON')]


After parsing the file entirely, the detected header line is: ('firstName', 'LastName')

Thanks everyone for your time and your help and I hope this might clarify the issue for those who have encountered the same problem.

nil is an attribute, defined in the inamespace. For this FirstName node, the attribute has the value true.

I got the same problem, you have to enable both USB debugging and Wireless debugging, turning on only usb debugging wont work....

import React, { useState } from "react"; import { Chess } from "chess.js"; import { Chessboard } from "react-chessboard";

export default function ChessGame() { const [game, setGame] = useState(new Chess()); const [fen, setFen] = useState(game.fen());

function makeMove(move) { const gameCopy = new Chess(game.fen()); const result = gameCopy.move(move); if (result) { setGame(gameCopy); setFen(gameCopy.fen()); setTimeout(() => botMove(gameCopy), 500); } return result; }

function botMove(currentGame) { const moves = currentGame.moves(); if (moves.length === 0) return; const randomMove = moves[Math.floor(Math.random() * moves.length)]; currentGame.move(randomMove); setGame(currentGame); setFen(currentGame.fen()); }

function onDrop(sourceSquare, targetSquare) { const move = { from: sourceSquare, to: targetSquare, promotion: "q", // always promote to a queen }; const result = makeMove(move); return result !== null; }

time() accepts a negative bars_back argument to retrieve the UNIX time up to the 500th bar in the future. You could iterate until the expected number of bars is found:

int counter = 1
while time("", -counter) < futureTime
    counter += 1
log.info("The number of bars is: {0}", counter)

Had similar issue to what @ktsangop described but in my case there was click event listener along with routerLink directive, and the navigation from routerLink was interrupted by the one in event listener leading to unexpected behaviour

Html code:

<a
  mat-tab-link
  [routerLink]="tab.link"
  (click)="selectTab($event, tab)"
>
  {{ tab.label | translate }}
</a>

Ts code:

 public selectTab(event: Event, tab: Tab): void {
  event.preventDefault();
  event.stopPropagation();

  this.router.navigateByUrl(tab.link);
}

If you don't use the environment file, you can also inject it like this:

app.module.ts

imports: [
  NgxStripeModule.forRoot()
]

app.component.ts

constructor(
   private yourConfigService: ConfigLoaderService)
  {
      injectStripe(this.yourConfigService.stripe?.publishableKey);
  }

I found an answer here:

Hide properties and events in new component

Not sure if I have to close the question as a duplicate.

Does this help you in any way?

import numpy as np
rows = 3
cols = 4
empty_2d_array = np.empty((rows, cols))

If you are using notepad++, then you can easily convert the text file to UTF-8 using the option in the right bottom.

You can convert a text document to any of these formats from notepad++.

In postgress the keyword user is reserved so add the annotation @Table and give to user another name like adding _user @Table(name= "_user") class User{}

I invite you to read this it may helps you prevent sql injection techniques

Thank you to @mndbuhl for pointing me at the solution in another post. I went with setting MapInboundClaims to false to give back all of the original claim names.

https://stackoverflow.com/a/79012024/4194514

builder.Services
    .AddAuthentication()
    .AddOpenIdConnect(options =>
    {
        // your configuration

        options.MapInboundClaims = false;
    });

there is a good example of this on this tutorial

To simplify the tutorial, we could do the following

In the body you could have something like this:

:root {
  --main-color: #42b983;
}

body {
  background-color: var(--main-color);
}

To access and change the variable in javascript, you could do the following thing:

// Get the root element
const root = document.documentElement;

// Retrieve the current value of a CSS variable
const currentColor = getComputedStyle(root).getPropertyValue('--main-color');

// Update the CSS variable
root.style.setProperty('--main-color', '#ff5733');

I am not thackling the whole javascript interactions here, as it already has been done in the ansers before, I am just showing the code that updates the root color.

<td>{{productos.imagenPro |nombre="img"  }}</td>

como puede lograr que una vez tenga el dato, puede asignarle un nombre y no lo que me renderiza desde la base de datos, dado que es una imange de internet y me renderiza todo el link y no lo quiero en su lugar quiero que por defecto me apareza la palabra img

This isn't the only thing that can be said about it with Big O notation. It's fastest/best Case would be O(n), and it's average is O(n*n!).

Maybe this passage can help you:

Optimizing Fine-Grained Parallelism Through Dynamic Load Balancing on Multi-Socket Many-Core Systems

https://arxiv.org/abs/2502.05293