go to %temp% and delete hsperfdata_<os_user> folder

check your package.json, it should have the autolinking paths 'searchPaths' so that the packages in these paths are autolinked by expo

  "expo": {
    "autolinking": {
      "searchPaths": [
        "../../packages"
      ],
      "nativeModulesDir": "../../packages"
    }
  },

This topic was very confusing to me, so I looked it up and found this link - which confused me more.

My understanding is that:

1. git rm removes the file from both the working directory (aka worktree, disk) and the staging area (aka index).

2. git rm -cached removes the file from only the staging area

So if you created a whole new git repository, created a new file, added the new file to the staging area, then ran git rm -cached, basically all you've done is unstage the new file and the new file still exists in the working directory so it can be added back to the staging area. Had you ran git rm instead, you would have removed the file from the staging area AND the working directory so it couldn't be added back to the staging area without creating the file again.

I'm guessing the OP's original question was why PaginationResult.java was still listed in the staging area after running git rm --cached. At least that's where I'm still confused.

You need to be using spherical kmeans. Yes, minimizing the euclidean distance between two l2 normalized vectors is the same with minimizing cosine, but you also have to l2 normalize the centroids, which you dont have access to in sklearn Kmean.

Adding to Florian's answer above, I recently attempted some more reverse-engineering on this, which has led me to a lot of new information.

What SciPy calls the function_workspace is actually called the subsystem. The subsystem appears in the MAT-file as a normal variable of mxUINT8_CLASS, i.e., its written as a uint8 variable with just one caveat - this variable has no name. Whether the subsystem is present or not is indicated by a 64-bit integer in the MAT-file header. This integer is a byte marker pointing to the start of the subsystem data in the MAT-file.

Coming to its contents, the subsystem contains all necessary data required to construct object instances of mxOPAQUE_CLASS objects. This includes both user-defined classes (using classdef), as well as datatypes like string, datetime, table, etc.

The way it achieves this is by encoding instructions on object construction using methods of a class FileWrapper__. These instructions include information such as the class type, its properties and their values, and the construction order (in case of nested objects). Each constructed object is mapped to a unique object ID, which is used to link this constructed object to its corresponding variable when reading them in the normal portion of the MAT-file.

The exact format of the subsystem data is extremely convoluted to get into, I would refer you to my documentation which goes into it in great detail.

I did this for my computer vision project at university to train a model using the max size for YOLO. I would use pillow to break the image in to smaller images, which you can do easily with list slicing.

As for question 2, the resolution is going to be different because you sliced the image into smaller images which directly affects the resolution, but the PPI will remain the same resulting in an image with high clarity yet smaller in size.

# using  join

set a {abcd}
set b {efgh}
set l [list $a $b] # a list
set c [join  $l ]  # space sep (default)
set d [join  $l  {}]  # no sep

puts $c

abcd efgh

puts $d

abcdefgh

Try this:

from selenium import webdriver
from selenium.webdriver.chrome.options import Options

optionss = Options()
optionss.add_argument("--start-maximized")
optionss.add_argument("--disable-popup-blocking")
optionss.add_argument("--ignore-certificate-errors")
driver = webdriver.Chrome(options=optionss)

If you already doing this, please show us all code.

Does it work this way ?

buttons = driver.find_elements_by_xpath("//*[contains(text(), 'Download All')]")

for btn in buttons:
    btn.click()

Inspired from Click button by text using Python and Selenium

This appears to be a known bug. Linking PR, which has been sitting dormant for almost 2 years

https://github.com/apache/flink/pull/25410

unless i misunderstand, looks like you just need to restructure your result differently.

const result = {};
for (let i = 7; i < jsonData.length; i++) {
    const rowData = jsonData[i];
    const singleRow = {};
    singleRow.water = { total: rowData[2], startDate: rowData[6]; }; // add other data as needed
    singleRow.electricity = { total: rowData[14], startDate: rowData[19]; };
    singleRow.gas = { total: rowData[9], startDate: rowData[11]; };

    const date = rowData[0];
    result[date] = singleRow;  // set property as row date
}

it seems you have all the pieces you need already. is there a particular issue you are having?

I have exactly the same problem, incredible!!!
I had to rollback to version 17.13.7 (where I have the problem with Output-Window without line breaks)

Use the class

unreal.PixelStreaming2StreamerComponent

Check the api documentation

https://dev.epicgames.com/documentation/en-us/unreal-engine/python-api/

It's May 28, 2025 and my team is running into this same issue. It potentially impacts certs using 4096-bit keys (rather than 2048). I've also noticed that if I upload a .pem version of the same cert (instead of .pfx) it seems to work.

PEM format:

• Cert

• Encrypted Key

• Cert Chain

emailObj.AddAttachment "c:\windows\win.ini"

How can i use if file has ddmmyyhhmmss date and time stamp like win_05282025122200.ini ??

i have follow this video, it's very helpful https://www.youtube.com/watch?v=zSqGjr3p13M

I have done this, dir.create(“testdir”) even copy pasted it. It does not accept it. Have spent over an hour collectively trying to figure this out. Would it be wise to shut the app down and restart or am I doing something incorrectly?

Appreciate your time and help

Navigate to the github address that you listed above.

Click on the "Code" dropdown menu.

Click on the "Download Zip" button.

For removing at a index you could do:

    public static T[] removeArrAt<T>(T[] src, int idx) {
        return src.Take(idx).Concat(src.Skip(idx + 1)).ToArray();
    }

which returns the modified array

try this wait = WebDriverWait(driver, 10) button = wait.until(EC.presence_of_element_located((By.XPATH, "//button[contains(., 'Download All')]")))

driver.execute_script("arguments[0].scrollIntoView(true);", button) driver.execute_script("arguments[0].click();", button) can you share a screenshot of the element in the browser dev tools or the full HTML block from outerHTML

After speaking with the dev team the correct answer here is that tethering can mitigate the issue somewhat, but backpressure cannot be fully eliminated from aeron at this time

For anyone still having this problem in May 2025, upgrading to the latest gtrendsR dev version helped:

install.packages("remotes")
remotes::install_github("PMassicotte/gtrendsR")

I didn't have such a rule in place, but experienced a similar issue, and found adding the following rule to .eslintrc.json did make the annoying line-length error go away:

"rules": { "@typescript-eslint/max-len": "ignore" }

The solution was simple--I am not sure what originally caused the problem.

The solution is to use "git remote add" to restore the target and associate it with the correct URL.

<canvas width="100" height="100" style="image-rendering: pixelated;"> will do the trick.

Found some notes from past reports and it turns out to be more than just merging columns. The generated group column must be deleted without deleting the group then add a row at that level. Then the columns can be merged.

See Examples for information on how example functions are named.

The example ExampleMain refers to the identifier Main.

The go test command runs the go vet command. The go vet command reports an error because the package does not have an identifier named Main.

Fix by associating the example with an exported identifier or the package.

In the following code, the example is associated with the package and has the suffix "jasmine".

package main

func Example_jasmine() {
    main()
    //Output: Hello, world!
}

Run it on the Playground!!!

I checked your code, but can't find any problem.

Here is class inheritance in Django.

ModelViewSet <- GenericViewSet <- GenericAPIView <- APIView

So if it works with APIView, it should work with ModelViewSet too.

Old question but a newbie, like me, might struggle with it.

So I created a directory, Production, then later renamed it production. My original files were stored in Github under Production, all new ones in another directory production. When I worked locally, (windows), it was all fine under production.

Sounds just like what you are asking.
Simply fix really, ignore all the git stuff.
Rename your local directory something else, let's call it test. Commit and push. All of your files and directories will be aggregated under the new directory test. Rename it back to your lower case, production, and commit and push. All issues resolved.

It’s a bit late, but I’d say you need to base64 encode the data you’re passing in on VersionData

(Edit your file content reference and pass it through base64(…) )

Because of using '\n' in scanf() function, you have problem on it. Just use this:

scanf("%d",&a);

CKEditor does not initialize on new CollectionField items in EasyAdmin Symfony — how to fix?

I'm using EasyAdmin 4 with Symfony, and I have a CollectionField that includes form fields with CKEditor (via Symfony's FOSCKEditorType or similar).

CKEditor loads fine for existing collection entries, but when I add a new item dynamically via the "Add new item" button, the CKEditor does not initialize on the new textarea.

🔍 What I tried:

• CKEditor is loaded and works on page load.

• New textareas appear when I add items, but CKEditor doesn't attach to them.

• Tried triggering CKEDITOR.replace() manually — no success.

• Using default Symfony + EasyAdmin JS setup, no custom overrides.

✅ Answer:

This is a common issue because CKEditor needs to be manually re-initialized on dynamically added fields inside CollectionField.

🔧 Fix: Manually re-initialize CKEditor when new fields are added

You can do this by listening to the ea.collection.item-added event that EasyAdmin dispatches.

Add this JavaScript to your EasyAdmin layout or as a custom Stimulus controller:

javascript

CopyEdit

document.addEventListener('ea.collection.item-added', function (event) { const newFormItem = event.detail.item; const textareas = newFormItem.querySelectorAll('textarea'); textareas.forEach(textarea => { if (textarea.classList.contains('ckeditor') && !textarea.id.startsWith('cke_')) { // Replace with CKEDITOR.replace or ClassicEditor.create depending on your setup CKEDITOR.replace(textarea.id); } }); });

🧠 Notes:

• Make sure the textarea has a unique ID, otherwise CKEditor won't attach.

• You might need to delay execution slightly using setTimeout() if CKEditor loads too early.

• If you’re using CKEditor 5, use ClassicEditor.create() instead of CKEDITOR.replace().

📦 Example (CKEditor 5):

javascript

CopyEdit

import ClassicEditor from '@ckeditor/ckeditor5-build-classic'; document.addEventListener('ea.collection.item-added', function (event) { const newFormItem = event.detail.item; const textareas = newFormItem.querySelectorAll('textarea'); textareas.forEach(textarea => { if (!textarea.classList.contains('ck-editor__editable')) { ClassicEditor.create(textarea).catch(error => { console.error(error); }); } }); });

Be aware that prompting a user with a native API in an infinite loop like this can cause app store and google play store rejection. You are requesting the user to setup / use a specific form of authentication, you must allow them to refuse that request - and both stores expect your app to remain usable despite the users decision. Some native APIs will just not show a message and fail automatically if you call them too many times. In your code that could cause a stack buffer overflow and your app could crash. But it depends on the API, others will just keep prompting, inwhich case your app will be rejected if it's reviewed thoroughly. Last I checked the max number of prompts allowed for permissions is 2. So your code is not usable either way, and you should not use it.

all scopes can be found here -https://developers.google.com/identity/protocols/oauth2/scopes

for firebase messaging - https://developers.google.com/identity/protocols/oauth2/scopes#fcm

I conditionally replace the Binary file in the Content column to create a column of tables:

= Table.ReplaceValue(Source,each [Content],

each if Text.Contains([Extension],".xl") then Table.TransformColumns(Source, {"Content", each Excel.Workbook(_)})

else if [Extension] = ".txt" then Table.FromColumns({Lines.FromBinary([Content])})

else if [Extension] = ".csv" then Csv.Document([Content],[Delimiter=","])

else [Content],

Replacer.ReplaceValue,{"Content"})

As of QTCreator 16:

Edit->Preferences

Then go to the "Text Editor" section on the left. (Below 'Environment', above 'FakeVim')

Then go to the "Display" tab. There is a block called 'Live Annotations'. Uncheck it to remove the inline warnings.

select document_mimetype, document_data  from resource_t where resource_id = :id

using a media resource did the trick where mimetype and the blob column are requested from the database table.

There's a functional difference between scopes and claims within the OAuth2/OpenID Connect (OIDC) framework:

• Scopes grant the client permissions to request access to specific categories of user information.

• Claims are the actual pieces of information returned after successful authentication and authorization, determined by the allowed scopes. (More info)

Certain sensitive data fields, such as SSN, fall into the category of Restricted Claims. Restricted claims cannot be retrieved just by including them in your authentication request.

To access these restricted claims:

• The Financial Institution (FI) must explicitly enable and authorize these claims in their backend configuration.

• This authorization is done by the FI's back-office administrators and involves configuring which specific claims your external application/plugin can access.

Given your situation, your client (who distributes this plugin to the Financial Institutions) must work directly with each FI to make sure these restricted claims are enabled appropriately.

Without explicit FI authorization, the sensitive claims (DOB and SSN) will not be returned, regardless of correct OIDC implementation.

Answering my own q and sharing in case it helps anyone: The problem was a glitch where Additional Attributes refused to save. This is a Loadrunner known issue covered here: https://portal.microfocus.com/s/article/KM000018481?language=en_US

Commenting out the line mentioned in the article failed and caused a JS error while loading the Additional Attributes page, but commenting and then uncommenting it restored functionality and re-enabled saving changes.

Thank you thank you thank you!

https://github.com/FPGArtktic/AutoGit-o-Matic

I have just found some tool on github.

Answered

Based on this article from NEXTJS own website, I added this to next.config.ts

turbopack: {
    rules: {
      "*.svg": {
        loaders: ["@svgr/webpack"],
        as: "*.js",
      },
    },
  },

I already read this article, but I was adding the snippet as is, which is not the right way to do it.

Correct Way

import type { NextConfig } from "next";

const nextConfig: NextConfig = {
  // INSIDE CONST, REMOVE MODULE.EXPORTS
  turbopack: {
    rules: {
      "*.svg": {
        loaders: ["@svgr/webpack"],
        as: "*.js",
      },
    },
  },
};

export default nextConfig;

From my experience the error is misleading and in my case it was due to networking configuration on the Storage Account.

It appears that if SA is set to not allow public network access from all networks - you will get the mentioned error when trying to export the database. (Yes, even if you check the "Allow Azure services on the trusted services list to access this storage account." option, which makes no sense.)

Try setting SA to allow all Public network access from all networks or use Private Link when setting up the Export of the database.

I think that texlive-full is too much, I suggest you should try to installing only the required packages, in this case install texlive-pstricks

I got this to work using legacy markers. I target the title attribute rather than aria-label.

const node = document.querySelector('[title="markerName"]');

node.addEventListener("focus",() => {
    //focus in code
});
node.addEventListener("focusout",() => {
    //focus out code
});

Pressing Insert or Cancel keys seemed to have worked according to:

https://answers.microsoft.com/en-us/msoffice/forum/all/cursor-selecting-text-on-single-click/80b7db95-c701-40ec-9e34-9a1437f80c51

(Mine worked with Insert)

function startDownload() {
  $('#status').html('collect data..')
  setTimeout(function(){
    download('test content', 'file name.txt', 'text/plain');
  }, 2000);
}

function download(text, name, type) {
  var file = new Blob([text], {type: type}) 
  $('<a href="' + URL.createObjectURL(file) + '" download></a>').get(0).click();
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button onclick="startDownload()">Download</button>
<div id="status"></div>

https://catafiles.com/gtafiveandroid

<!DOCTYPE html>
<!--[if lt IE 9 ]> <html class="ie8"> <![endif]-->
<!--[if IE 9 ]> <html class="ie9"> <![endif]-->
<!--[if (gt IE 9)|!(IE)]><!--> <html> <!--<![endif]-->

Manish shil

For me, the fix as to:

1. Open control panel

2. search for "mouse"

3. choose Change mouse settings

4. in the Mouse Properties dialog, choose the Pointer tab

5. Under Customize choose Text Select

6. Check the Enable Pointer Shadow

7. Click Apply, OK

registro_turnos = pd.DataFrame({
    "Fecha": ["28/05/2025", "28/05/2025"],
    "Nombre Cliente": ["Juana Pérez", "Ana Torres"],
    "Servicio": ["Corte Mujer", "Color + Corte"],
    "Precio": [4000, 8000],
    "Hora": ["10:00", "11:00"],
    "Duración (min)": [45, 90],
    "Cancelado": ["No", "No"],
    "Medio de Reserva": ["Instagram", "Google Maps"],
    "Comentarios": ["Muy conforme", ""]
})

analisis_semanal = pd.DataFrame({
    "Semana": ["20-26 mayo"],
    "Total Turnos": [36],
    "Total Ingresos": [144000],
    "Ticket Promedio": [4000],
    "Ocupación (%)": [80],
    "No-Shows (%)": [5.5]
})

servicios_rentabilidad = pd.DataFrame({
    "Servicio": ["Corte Mujer", "Coloración"],
    "Precio Promedio": [4000, 6000],
    "Costo Estimado": [500, 2000],
    "Margen (%)": [87.5, 66.6],
    "Frecuencia Semanal": [15, 10]
})

base_clientes = pd.DataFrame({
    "Nombre Cliente": ["Juana Pérez", "Ana Torres"],
    "Teléfono": ["1123456789", "1198765432"],
    "Email": ["[email protected]", "[email protected]"],
    "Primera Visita": ["12/02/2024", "10/04/2025"],
    "Última Visita": ["28/05/2025", "28/05/2025"],
    "Frecuencia (días)": [45, 18],
    "Refiere a otros": ["Sí", "No"]
})

redes_marketing = pd.DataFrame({
    "Fecha": ["25/05/2025", "26/05/2025"],
    "Plataforma": ["Instagram", "TikTok"],
    "Tipo de Contenido": ["Corte antes/después", "Video rápido"],
    "Alcance": [5400, 8200],
    "Interacciones": [300, 620],
    "Turnos Generados": [4, 6]
})

# Crear el archivo Excel
with pd.ExcelWriter("Peluqueria_Palermo_Dashboard.xlsx", engine='xlsxwriter') as writer:
    registro_turnos.to_excel(writer, sheet_name='Turnos', index=False)
    analisis_semanal.to_excel(writer, sheet_name='Análisis Semanal', index=False)
    servicios_rentabilidad.to_excel(writer, sheet_name='Servicios', index=False)
    base_clientes.to_excel(writer, sheet_name='Clientes', index=False)
    redes_marketing.to_excel(writer, sheet_name='Marketing', index=False)

try running using the command

python -m uvicorn main:app --reload

try to check the file or directory which you are using or where the file are stored and next way is to make another folder as new folder and open it with your vscode

This is now easily available as of (at least) PyCharm Professional 2025.1 in the settings.

The picture doesn't seem to be uploading, you can find the setting at:

"Languages & Frameworks" -> "Markdown" -> "Preview font size"

Ok, now I understand. I mistakenly made my root view controller be the initial controller when I was upgrading to a scene lifecycle. I did have a navigation controller, but when I made my root view controller the initial controller, it removed the initial controller status from the navigation controller. That prevented the navigation bar item from working. Once I made the navigation controller be the initial controller (as it originally was), the navigation items are once again displaying.

The health-check was eventually passing and the restart attempt stopped. The issue is that Kubernetes does not report when a health check stops failing and starts passing.

After observing and troubleshooting for a long time I finally realized this when the error counter did not increase after many minutes.

This issue comes because in your admin panel permalinks are different from Elementor permalinks. In Elementor you can find the page you are looking for. Do not link you permalinks from you Wordpress admin panel.

This however does not have anything to do with PHP because this is template builded. Your tags should be "Elementor", "Wordpress"

(Check your Elementor page and link it to your website)

The later versions of Cognos introduced the parameters pane which allows for the setting of default values based on other query columns, report expression and additional logic. This can be used to achieve your requirement.

This issue happens when some environment doesn't set. Do you verify all settings that your code needs to run the test?

@Abhijit Sarkar Yes, plus the processing overhead of translating. Also, implementation(libs.spotbugs) is more concise than implementation(plugin(libs.plugins.spotbugs)) and doesn't require additional code. If you are referencing the plugin in subprojects and not just in your plugins, is being able to use alias(libs.plugins.spotbugs) really better than id("com.github.spotbugs") ? (fyi, this is just an honest question and me wanting to know your opinion. Thank you for your input)

See also Escape the Data Dungeon: Unlock Scalable R Analytics and ML.

Your user_functions.py lies in a different folder parallel to your main_script.py so you need to let python know to import from the parent (`..`) folder.

import sys
sys.path.append("..")
from user_functions import config_reader

Possible duplicate of Redis list with expiring entries??

Check if given answer here, https://stackoverflow.com/a/48051185/1278203, serves the purpose.

We ultimately decided to bite the bullet and refactor all of our files before merging them all at once. We used this tool to automatically rewrite the define() headers into import statements in bulk; after that we just need to rewrite our async imports manually.

https://github.com/prantlf/requirejs-esm-converter

https://gist.github.com/theguy000/1f866abf57a0561983b49ea98eb10b5c

try this one. i made a script to make downloading scripts easier.

All credit for the answer goes to @KIKO Software and @Phil .

To answer everyones question first: The error is that there is no style added to the class, so the div doesn't revieve a cc style class. My bad that I didn't expres this specificly.

The answer, by @KIKO Software and @Phil, is the quotes and the php tag. I did not add the short_open_tag, so <? didn't work, it should have been <?php And I quotes, I added the quotes because the class should be between quotes "". And to skip a quote during the echo I used the ". But echo itself was sufficient, and the extra quotes just got in the way.

$style = "input_container";

~

<div class=<?php echo $style; ?>>

And special thank you @Jason Lommelen for the htmlspecialchars() tip! I can definatly use that at some places.

"ctrl + enter", or "command + N", also, you can use right click -> Generate..

Async execution of queries does not necessarily imply true parallelism. While executeAsync() is non-blocking, spawning 300 queries could overwhelm the system. Not all threads will be in the RUNNING state simultaneously. Many may be waiting or queued. This queuing likely explains the drastic increase in response time for APIs executing large numbers of queries.

I would recommend checking CPU utilization, thread pool stats (via nodetool tpstats), and capturing a thread dump to confirm thread contention or queuing bottlenecks on the Cassandra nodes.

Additionally, Cassandra does not support batch reads (Refer: Batch select in Cassandra). Also, upgrading hardware may not help much if the application logic and query patterns are inefficient. It would be more effective to optimize the queries, avoid wide rows or fetching 300 columns unless necessary, and limit concurrency with bounded async execution strategies rather than spawning hundreds of concurrent queries without control.

When you go to import, instead of clicking third party configuration, click mysql workbench.

Add the following to your environment variables (requires for dotnet tools to use the correct version):
MSBuildSDKsPath=/usr/local/share/dotnet/sdk/9.0.300/sdks

Building the answer @sahil-jaidka provided in the comments, you can fix this with KeyboardAvoidingView and setting isKeyboardInternallyHandled={false} on your GiftedChat component.

import {
  KeyboardAvoidingView,
  Platform,
  StatusBar,
  View
} from 'react-native';

import { useHeaderHeight } from '@react-navigation/elements';
import { GiftedChat } from 'react-native-gifted-chat';


export default function ChatScreen() {
    const headerHeight = useHeaderHeight();
    const keyboardVerticalOffset= Platform.OS === 'ios' ? headerHeight : headerHeight + StatusBar.currentHeight;

    return (
        <View style={styles.container}>
            <GiftedChat
                messagesContainerStyle={styles.messagesContainerStyle}
                messages={messages}
                ...
                isKeyboardInternallyHandled={false}
            />
            <KeyboardAvoidingView 
                behavior='padding'
                keyboardVerticalOffset={keyboardVerticalOffset} 
            />
        </View>
    );
}

Here's a better version I modifyed

<script>
    function openGame() {
        var win = window.open(url, '_blank', 'fullscreen=yes');
        var url = "https://link/"
        var iframe = win.document.createElement('iframe')
        iframe.style.width = "100%";
        iframe.style.height = "100%";
        iframe.style.border = "none";
        iframe.src = url
        win.document.body.appendChild(iframe)
    }

The procedure doesn't return anything because all your conditional logic involving NULL evaluates to UNKNOWN in SQL Server, which is treated as false. As a result, no rows are inserted or selected. Additionally, your final SELECT is inside a TRY block, and since no error occurs, it runs silently without output. If you want to see a result, add a SELECT NULL AS [null] outside of the TRY...CATCH block at the end. And then also just a heads up that NULL = NULL does not evaluate to true in SQL — it's UNKNOWN. That’s likely why nothing is returned or inserted

tengo el mismo problema, como lo solucionaste? no puedo acceder ni por putty ni por SSM. Muestra este error: SSM Agent is not online

The SSM Agent was unable to connect to a Systems Manager endpoint to register itself with the service.

What I need to do is use selectpicker('refresh'). The Javascript now looks like this:

var select = document.getElementById("options");
select.innerHTML += "<option>two</option>"

$('.selectpicker').selectpicker('refresh');

So to dynamically create options in Javascript, I can do this:

function createOptions(options){
    console.log(options) // ['one', 'two', 'three']
    var select = document.getElementById("options");
    select.innerHTML = "<option>"+options[0]+"</option>"

    for(let i = 1; i < options.length; i++){
        select.innerHTML += "<option>"+options[i]+"</option>"
    }

    // USE THIS TO RELOAD THE LIST \/ \/ \/
    $('.selectpicker').selectpicker('refresh');
}

Yet other possible syntax are:

lon = arr1.lon

or

lon = arr1['lon']

apart from the already mentioned

lon = arr1.coords['lon']

try removing this line in initState

FocusScope.of(context).unfocus();

The secret of this is to put both width and heigth with the same value with the "style" option:

  <input type="checkbox" style="width:25px; height:25px;" name="option1">

It's because in Jinja2, string vars are "truthy" when used in bool expressions, meaning any raw (ie no "bool()" filter applied) non-null value evaluates to "true".

Please follow the below steps, these worked well for me in Eclipse, replicate accordingly in IntelliJ if works

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!!
Cheers!

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!!
Cheers!

You can also enable it for a single form via html and novalidate: false attribute:

= simple_form_for offer,
  url: '/any-url',
  method: :post,
  html: { novalidate: false } do |f|

Similar issue observed in matlab 2024a. Solved by renaming "libstdc++.so.6" in matlab install dir to MATLAB/R2024a/sys/os/glnxa64/libstdc++.so.6.backup. Related info in https://bbs.archlinux.org/viewtopic.php?id=275084

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!!
Cheers!

After updating to Android SDK Command-line Tools (latest) from SDK Manager, everything is working smoothly for me

https://github.com/flutter/flutter/issues/169252#issuecomment-2916593624

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!!
Cheers!

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!!
Cheers!

There is a feature of Classic Release pipelines in Azure DevOps called Deployment queue settings that can define the behavior of subsequent releases.

The default setting is "Deploy all in sequence". By changing this value to "Deploy latest and cancel the others" newer releases will cancel the approval on existing stages.

Although there isn't an equivalent for YAML-based pipelines, I have an extension that can emulate this behavior.

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!!
Cheers!

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!! Cheers!

Please follow the below steps, these worked well for me in Eclipse.

To Resolve "TestNG Class Not Found" Issue in Eclipse:

1. Right-click on your project in the Project Explorer.

2. Select Build Path → Configure Build Path.

3. In the Libraries tab:

   • Ensure the TestNG library is listed and checked.

   • If it’s missing, click Add Library → TestNG → Next → Finish.

4. Switch to the Order and Export tab:

   • Check the box next to the TestNG library.

   • Move TestNG to the top of the list.

5. Also ensure the JRE System Library is added and points to a valid JDK (Java Development Kit), not just the JRE.

   • You don't need to move the JDK to the top, just make sure it’s checked.

6. Click Apply, then OK to save the changes.

7. Right-click the project again and select Maven → Update Project.

8. Run a Maven install to ensure dependencies are resolved:
   Run As → Maven install

9. Finally, run your class as a TestNG Test:
   Right-click → Run As → TestNG Test

Happy Coding!! Cheers!

You're seeing the error because mediapipe does not currently support Python 3.13. The package only provides precompiled binaries (wheels) for specific Python versions, and 3.13 is too new. To install mediapipe, you’ll need to downgrade to Python 3.12 or lower. First, install Python 3.12 from the official Python website, then create a virtual environment using python3.12 -m venv mp-env and activate it. Once inside the environment, run pip install mediapipe and it should work without issues.

How to use ak.Array with index arrays to create a custom masked output?

Using a list comprehension.

Snippet:

import awkward as ak

my_indices = ak.Array([[0, 1], [0], [1]])
my_dummy_arr = ak.Array([[1, 1], [1, 1], [1, 1]])

result = ak.Array([
    [arr[i] for i in indices]
    for arr, indices in zip(my_dummy_arr, my_indices)
])

print(result)

Output:

[[1, 1], [1, 0], [0, 1]]

Is it possible that you are including another functions.php from perhaps 'include_path' dir?

Use this to investigate which files had been really included:

var_dump(get_included_files());

especially that your 'require' is not using 'inc' subdirectory

require 'functions.php';

require 'inc/functions.php';

I'm having similar issue

Is there still no solution to this.

I will be back when I find a solution

Unfortunately, mediapipe is not supported by python 3.13 yet.

To work with mediapipe you need to install python 3.12 separately and work.

https://pypi.org/project/mediapipe/

Release history: https://pypi.org/project/mediapipe/#history

Yes, it's possible. But it's more difficult because you have to create the navigation manually. Navigation component reduce boilerplate https://developer.android.com/guide/navigation?hl=es-419

There's a video in the documentation that explains the navigation component very well.

For beginners, it's better to use the navigation component.

So to be sure, did it still work with IOS 18.4? It is difficult to debug with this information. See if more people with the same car brand have this issue and check your background execution rules.

If these don't help you, contact support or wait for an update.

Ok, this is a misunderstanding between „hosting a lambda on cdn“ and cloudfront functions.

Cloudfront functions are functions to be applied to each request of a website.

Lambda functions on aws always are located in a region like us-east-1

With cloudfront you can just cache responses. Two different things!

I need more information about how you're running your Expo app. Are you using Expo Go, a Development Build, or running it the plain React Native way (e.g., npm run android)?

Just a reminder: if you're using Expo, it's highly recommended to run your app using one of the following methods:

1. Expo Go, This runs your app using the Expo Go client by scanning a QR code. It's great for quick testing and doesn't require a custom build.

2. Development Build, this runs your app in a custom environment, allowing you to make deeper changes and use native libraries or packages that are not supported by Expo Go

⚠️ Avoid running your Expo app the same way you would run a plain React Native project (e.g., npx react-native run-android), as this is not the intended workflow with Expo.

if you already run your expo app using those 2 corrected method and still get the same issue, then try to run your app again using this command

npx expo start --clear

for more information about how develop and run expo app, you can check here

Variable a is still a string ("3")

variable i is an integer (3)

try printing dir(i)