Some database errors may not raise full tracebacks if they occur in places where Django does not directly handle them. Check your database logs to see if an issue occurs at the database level

Another workaround using patchwork. But still waiting for facet_wrap approach.

library(ggplot2)
library(dplyr)
library(tidyr)
library(patchwork)

windowsFonts(Palatino = windowsFont("Palatino Linotype"))

plot_histograms_patchwork <- function(data, columns = where(is.numeric), rename_xlab = NULL) {  
  # Select columns properly
  selected_cols <- if (is.numeric(columns)) {
    names(data)[columns]  # Select by index
  } else {
    names(select(data, {{ columns }}))  # Select by condition (e.g., numeric)
  }  
  plots <- list()  # Store individual plots  
  for (col in selected_cols) {
    x_label <- if (!is.null(rename_xlab) && col %in% names(rename_xlab)) rename_xlab[[col]] else "Value"    
    # Conditional y-axis title only for "Ca"
    y_label <- if (col == "Ca") "Frequency" else NULL    
    p <- ggplot(data, aes(x = .data[[col]])) +
      geom_histogram(aes(y = after_stat(count)), bins = 30, fill = "#69b3a2", color = "#e9ecef", alpha = 0.9, na.rm = TRUE) +
      theme_bw() +
      theme(
        text = element_text(family = "Palatino"),
        axis.title.x = element_text(size = 12),
        axis.title.y = if (col == "Ca") element_text(size = 12) else element_blank(),
        plot.title = element_blank()  # Remove titles
      ) +
      labs(x = x_label, y = y_label)    
    plots <- append(plots, list(p))
  }  
  # Arrange all plots using patchwork with 3 columns
  final_plot <- wrap_plots(plots) + plot_layout(ncol = 3)  
  return(final_plot)
}


plot_hist_all <- plot_histograms_patchwork(
  data = R_macro_rev, 
  columns = 7:15, 
  rename_xlab = c("N" = "Total N (mg/kg)", "P" = "Total P (mg/kg)", "K" = "Total K (mg/kg)", 
                  "Ca" = "Total Ca (cmol(+)/kg)", "Mg" = "Total Mg (cmol(+)/kg)", 
                  "NP" = "N:P ", "NK" = "N:K ", "PK" = "P:K ", "CaMg" = "Ca:Mg ")
)

plot_hist_all

the resulting plot here:

Use an alternative authentication method - SSH

1. Setup SSH keys for authenticating - guide

2. Switch your remote repo URLs to use SSH -guide

Once this is done, you will not use askpass.sh but use SSH instead and never get that error again.

In LDAP, the UserAccountControl attribute is used to define user account properties in Active Directory (AD). The value 512 corresponds to a "normal" enabled account. If you need to set or modify this attribute to 512, follow the steps below .

Open PowerShell as Administrator. Run the following command to set the attribute to 512 (Normal Account):

Set-ADUser -Identity "Username" -Replace @{userAccountControl=512}

please watch this video https://www.youtube.com/watch?v=OCmCIMJ4X08 I hope your problem will be solved soon.

Correct. But as per the documentation, you should use 'The' prefix for naming single-instance components

I'm facing the same issue but in Azure Databricks while installing azure libraries, did you know if there is any option to force the old version??

solved it by adding "Safari >= 13" @ browserslist

So what about use dual core? On second coe wi run zero_cross with interrupt

This is a known issue in Quarkus, you can follow it here

As mentioned in the issue, seems to be caused by how JUnit works.

I got the same error. There are 2 main reasons, as far as I know.

1. Unavailability of free space
2. Network-related issues

For free space issues, you need to make sure you have at least 7 GB of free space (this space amount is specified for Pixel 3 API 34). If its already there, then it might be a network-related issue. Try rebuilding a dozen times, and it will keep downloading dependacies you implemented and successfully build the project. For me, rebuilding a dozen times works.

This question appears when you search for current (2024/2025) autocompletion issue in intellij without language specificity.

So for this actual and more generic issue: intellij ia autocompletion is super slow and kind of useless. This can be disabled in:

Settings > Editor > General > Code completion > Machine Leaning > Assisted Completion

Then, uncheck Sort completion suggestions based on machine learning

This should get things back to normal.

I have used DBeaver for a PostgreSQL database and I liked it very much. It has a community version that is free. The free version allows you to perform most tasks.

I know this is old, but in case anyone else comes looking. This is a problem that has nothing to do with loading or fetching. This is a rendering issue. At least it was for me. I have a carousel of images and the images are cached thanks to react query (LOVE) and I verified they are not loading or fetching. They just kept drawing on the screen slowly, in pieces, in a weird order - basically looked like crap. Anyway come to find the image sizes where in actuality 3x bigger than the size I was rendering them. Fixed that problem and got them down to the lowest size possible and all of a sudden all the images "draw" on the screen instantly.

On this topic. The other day I had a performance score of 58 on an app that had a large image painting on page load. Again, the image actual size was way to big, and when I reduced it to the appropriate size the performance score shot up to 98.

Two lessons now on why you really need to pay attention to the actual size of the images you are using, and make sure they are as small as possible. And yes, you should be using webp, lazy load when required, preload when required - I am not discounting any of that. I use all those techniques as well. But the sizing of the images is just paramount to good UX/UI.

I do not know if this is OPs actual issue. People often confuse loading/fetching with rendering. They don't know the diff. That's ok. You can figure it with a quick loading state and having "loading.." come up on the screen during loading (or fetching, or both). In my case there was no loading or fetching time at all. This was a paint problem.

I had a support session with AWS engineer, and he said that the quota is 100 requests per second, even though you have in service quota a quota 10k for invokeEndpoint (not asyncEndpoint).

This quota is not populated anywhere, not in service quota, nor public documentation.

The issue happens because the bot needs to remember what the user originally typed before they select a language. The solution is too Store the users message in a dictionary and retrieve it when they pick a language This way bot knows what to translate and sends the correct answers

Thanks for all! I got requests.exceptions.SSLError:

Caused by SSLError(SSLError(1, '[SSL: DH_KEY_TOO_SMALL] dh key too small (_ssl.c:997)'))

This helps:

import requests
import ssl
from requests.adapters import HTTPAdapter

class CustomSSLAdapter(HTTPAdapter):
    def init_poolmanager(self, *args, **kwargs):
        ssl_context = ssl.create_default_context()
        ssl_context.set_ciphers('DEFAULT@SECLEVEL=1')

        # See urllib3.poolmanager.SSL_KEYWORDS for all available keys.
        kwargs["ssl_context"] = ssl_context

        return super().init_poolmanager(*args, **kwargs)


sess = requests.Session()
sess.mount('https://', CustomSSLAdapter())

Environment:

Python 3.10.6
urllib3            2.3.0
requests           2.32.3
OpenSSL 1.1.1n  15 Mar 2022 (print(ssl.OPENSSL_VERSION))

P.S. https://stackoverflow.com/a/72518559/3270632 said, that "Obviously, in general THIS SHOULD NOT BE USED. This will allow for man-in-the-middle attacks and other nasty things. Be careful and mindful when changing these settings."

Please ref to the example here using the config field, or try VMServiceScrape.

Unfortunately this is not supported. Neo4j Connector for Kafka publishes all change messages received from CDC in the same way that it publishes to target topic(s). Note that this is designed in this way since publishing all change events within a single message would cause several problems (such as hitting memory limits or message size limits), especially for large transactions.

If this is a must for you, what you already suggested might be the best option.

https://docs.google.com/spreadsheets/d/1DBfZd46QWLtCCNMqGAoUQ3NQ2NP_Y6NY9E4FpQPm0P0/edit?usp=sharing

Please Download the file i need in urgent this is my expense sheet

We have the same problem. During updating the game from Google Play we have the error "can't install game".

it was working normally before but it happens since beginning of this week.

When did this problem begin for your game??

Simply had to do it another way in sanity. I requested the whole object instead of the reference. In the question i posted, i was trying to fetch the reference. That worked, but i could not access the value.

name: Manual Workflow on PR on: pull_request: types: - opened workflow_dispatch:

jobs: build: runs-on: ubuntu-latest

steps:
  - name: Checkout code
    uses: actions/checkout@v2

i am new to github actions but what will happen if we write worflow_dispatch : before types and what will happen if we write it more down

Pserver is used to access to remote cvs repository from you local server. you can also set environment variable CVSROOT in your system that connects to remote cvs server :pserver:use_name:IP_ADDRESS_OF_REMOTE_CVS_REPO:Path of cvs root... i hope this might help you.

Download Python 3.7

wget https://www.python.org/ftp/python/3.7.10/Python-3.7.10.tgz tar -xvzf Python-3.7.10.tgz cd Python-3.7.10 ./configure --enable-optimizations make -j$(nproc) sudo make altinstall python3.7 --version

So in my case, this error occured when I nested a ScrollView inside a KeyboadAvoidingView. This worked in the Expo SdK 51 but not in 52. Not sure about the technichal details, but it resolved my issue. Also from the error stack, it seems that this issue is caused by the ScrollView componenent.

https://stackoverflow.com/users/9898643/theo i would like to add to your step this variation I found on Reddit that Powershell does not really cover the issues with specific characters not resolved in powrshell lower than 6.3 Ihttps://www.reddit.com/r/PowerShell/comments/w5ryco/removing_specific_elements_from_a_json_file/ think so please

This has become a fatal error in newer versions of pip(probably >=23). Need to migrate new projects to PEP-440 format, or keep using old pip versions.

I've experienced a similar issue with my MongoDB cluster on MongoDB Atlas.

"Quiesce" mode indicates that a node in the cluster is shutting down, usually as part of maintenance, updates, or optimizations by the service provider. This is a routine process where the node is replaced with a new one.

It's nothing major, but I recommend scheduling your cron jobs just before or after midnight, as most providers perform maintenance around that time.(Factor in the time zone of your cluster)

Also know that "Quiesce" will trigger connection to MongoDB exceptions too.

NB: you may still see this error but it shouldn't affect your job anymore.

I think what you want is implemented in Dynamic loading options as described in docs.

You can add @virtual-scroll event and you can trigger fetchData in it's handler.

Example from docs:

// Template

<q-select
  filled
  v-model="model"
  multiple
  :options="options"
  :loading="loading"
  @virtual-scroll="onScroll"
/>

// Script

setup () {
const loading = ref(false)
const nextPage = ref(2)
const options = computed(() => allOptions.slice(0, pageSize * 
 (nextPage.value - 1)))

return {
  model: ref(null),
  loading,

  nextPage,
  options,

  onScroll ({ to, ref }) {
    const lastIndex = options.value.length - 1

    if (loading.value !== true && nextPage.value < lastPage && to === 
      lastIndex) {
      loading.value = true

      setTimeout(() => {
        nextPage.value++
        nextTick(() => {
          ref.refresh()
          loading.value = false
        })
      }, 500)
    }
  }
 }

use TouchableWithoutFeedback from react-native

in code change

<TouchableWithoutFeedback onPress={()=> setIsOpen(false)}> 
    //your dropdown code
</TouchableWithoutFeedback>

Even tho it was already set to desktop-linux I switch to desktop-windows and than switched back to desktop-linux. This solved my issue.

In IIS 10 this can be changed by updating .NET Globalization settings:

I got the same error. There are 2 main reasons, as far as I know.

1. Unavailability of free space
2. Network-related issues

For free space issues, you need to make sure you have at least 7 GB of free space (this space amount is specified for Pixel 3 API 34). If its already there, then it might be a network-related issue. Try rebuilding a dozen times, and it will keep downloading dependacies you implemented and successfully build the project. For me, rebuilding a dozen times works.

Think about the scope. When you use a while loop in your program, a pair of curly braces is used. It means that your newly created node can only survive between the curly breaces. Every time the loop body is carried out, the memory will be recycled. Note that when you get in the loop body, the system allocate the memory from stack, which will be recycled. But malloc() will allocate from the heap, which need to be managed by your self. So malloc() can continuously gives you a new node. Hope it's helpful! :)

It sounds like you're encountering a few issues related to connecting to the database when deploying your application to Google App Engine. Given the information you've provided, I can suggest a more structured approach to resolve the issue. Let's break it down:

Key Areas to Address: SQLAlchemy Database URI: The database connection string you're currently using (SQLALCHEMY_DATABASE_URI) works fine for local development, but when deploying to Google Cloud SQL, you should switch to using a Unix socket connection instead of connecting via a public IP. To know more click this link

Without xargs but its doing its job:

for ns in $(kubectl get ns --no-headers); do echo $ns && for pod in $(kubectl -n $ns get pod -o name); do echo $pod && kubectl -n $ns logs $pod --all-containers=true | grep $value; done; done

i use the webservice of www.steamwebapi.com they have an float api

There is no concept of inner or outer for shape like this.

The idea is first find the skeleton of the shape, for each point on skeleton, draw vertical line according to the slope, calculate the intersection points between the line and shape boundary.

Smoothing the shape or there will be many noises.

adding these lines can help, this solved one of my cases:

connectionTimeout: 60000, // 60 seconds
socketTimeout: 60000,

If you are using spring you can add to your application class:

@EntityScan("base.package.that.includes.converters")

Make sure this is on the application class that has the main spring annotation like @SpringBootApplication

Once you've done that it will setPackagesToScan for JPA entities which will find the converters and register them which will make the autoApply actually work.

Azaad, could you tell me which system you configured the proxy for, I have a similar task, but nothing works, I can't solve the problem for more than 5 days

You can make use of the Readonly<Type> utility type.

interface Todo {
  title: string;
}
 
const todo: Readonly<Todo> = {
  title: "Delete inactive users",
};
 
todo.title = "Hello";

When trying to modify todo in the last line, a typ error occurs:

Cannot assign to 'title' because it is a read-only property.

I have come across a similar issue. Were you able to resolve the error? Thanks

I encountered same issue and my site is hosted on Vercel.

My fix:

1. Change SSL/TLS encryption from full(strict) to full
2. Edge certificate, turn on "Always use HTTPS"

yes actually i faced the same error while creating the react app, i used node version 21.7.1 as it is not working after I use the Recommended versions: Node.js: 16.x or 18.x (avoid Node 19 or newer with create-react-app) npm: 8.x or later

I think it is about priority of operations. for both of the commands you do not need to write "is true". it is enough to write the phrase. but maybe python check (config is true) and it is false!

This problem occurred on my code,and i have created new sheet then its works

However, the bp.memory.break command uses the front end processor which is inefficent from within breakpoint-intensive scripts.

I didn't quite understand why this is inefficient. BTW, the bp.memory.break takes optional object parameter that can be use to select the object to set a breakpoint on.

Using a mix of SIM_breakpoint (for efficiency) and bp.memory.break (to set a prefix) seems dangerous because the bp.manager and SIM_breakpoint are not exclusive on their use of breakpoint numbers.

Yes, it is true. The numbers assigned are different.

Is there a low-level Python API in Simics for setting breakpoints with prefixes?

The functionality is not available as Python API but one can "manually" update sim->breakpoints attribute to set the required prefix. From Python the attribute is available as conf.sim.attr.breakpoints. One can get the documentation for the attribute with the help sim->breakpoints command.

is inefficent from within breakpoint-intensive scripts

I don't know your performance requirements and whether this Python code is a bottle-neck but can note that rewriting related code in C can definitely give a performance boost.

try to install react-native-screens : "3.29.0" (without ^) i think it solve

Just turn off the option for 'Use graphics acceleration when available' relaunch, and you are good to go. No need to uninstall any extensions. This will suffice.

thank you for your hints. In the meantime I created a completly new project only with .Net 8 and SAP .Net connector 3.1.5.0 what should be working together. The necessary VC++ runtimes are also installed. But I still have the same problem.

Something is not fitting together and I have no idea what :-(

How foreachPartition works

When you call foreachPartition, Spark:

Serializes the function and sends it to the executors.

Each executor applies the function to its assigned partition(s).

No data is returned to the driver (unlike collect() or show()).

As @Steven has mentioned, you should check logs on Executors side. Moreover, you need to be careful with DB connections that are established from Executors.

This part:

db_client = PostgresDbClient(DbConfigBuilder(config, config['vault']['service_type'], ssl_cert_file=None))

Check whether you have all the needed libraries, open ports, network configuration, etc. - all that you have to use to connect to PostgreSQL in the same way you did it in the main program.

import subprocess

subprocess.run(["soffice", "--headless", "--convert-to", "xlsx", filename], check=True)

Just in case, can you check if the Microsoft Hand Interaction Profile is enabled under the Windows, Mac, Linux settings tab on those two PCs with issues?

How about using the enem extractor tool? This tool is capable of extracting everything from an Enem test and converting it to JSON

In this repository you can find information on how to use it and also access extractions that have already been made.

https://github.com/diaslui/enem-extractor

select concat ('{' , translate( 'GHEFCDAB-KLIJ-OPMN-QRST-UVWXYZ012345' , hex(object_id),'ABCDEFGHIJKLMNOPQRSTUVWXYZ012345')) || '}' , hex(object_id) as original_object_id from docversion

it works correctly, thanks

Modify your on_message function to include await bot.process_commands(message):

Explanation: on_message Overrides Default Command Handling:

When you define on_message, it completely replaces the bot’s default event handling for messages. This means the bot no longer processes commands unless you explicitly tell it to. await bot.process_commands(message)

This ensures that any commands (!hi in your case) are still processed after handling on_message.

My similar issue had appeared after setting the torch default device to cuda… it seems that torch.onnx.export depends on that.
So to workaround it, i have changed the default device to cpu right before the export, then changed it back to cuda after the export. Hope this helps.

Create folders in root and set the permissions accordingly. First you need to create a dummy domain in the Domains system and have a folder of the same name in the /root file system in which you keep those files. Works for us.

I also encountered this problem after the update. Is this a new feature of vscode? I don't like this feature 🙃

Nest the capture method call in the ContentRendered event of each window?

private void MainWindow_ContentRendered(object sender, EventArgs e)
{
    DoStartCapture();
}

In my case the issue was the last update (1.97.0) and the solution was to disable gpu acceleration. You can do this by either starting vscode from the command line with gpu disabled flag using "code.exe --disable-gpu" in Windows.

The second method is to add the "disable-hardware-acceleration" line in argv.json in this way:

1. Open command pallete (Ctrl + Shift + P) or (Ctrl + Command + P in Mac)
2. Enter "Preferences: Configure Runtime Arguments"
3. Add config: "disable-hardware-acceleration": true
4. Restart VS Code

hooman's answer is true. and in bottom navigation,put code in bottomNavigation ontap.

onTap: (index) {
          setState(() {
            selectItem = index;

            FocusManager.instance.primaryFocus?.unfocus();
          });

You probably need to specify that's a calculated table you are dealing with. This works:

foreach (var t in Selected.CalculatedTables)
{
    t.Expression = "{...}";
}

The solution for this problem mentioned above:

"I get the following message when trying to use systemctl: System has not been booted with systemd as init system (PID 1). Can't operate."

You have to execute this commands in WSL2:

wsl --update

wsl --shutdown

sudo nano /etc/wsl.conf

Add this line if not exists yet: [boot]systemd=true

Save file wsl.conf(Ctrl + X, before Y Enter).

wsl --shutdown

systemctl status docker

delete IOS folder then in terminal run command flutter create . working 100%

Do you have the firebase-messaging-sw.js file under your web directory? To receive push notifications, you need to set up a Service Worker at first.

Link

try looking on to google or ask copilot or any AI software, it's can help you. Have a good day!

Please check it here: https://www.reddit.com/r/VictoriaMetrics/comments/1ilpebv/understanding_what_data_is_there/

Also I commented couple days ago but somehow my comments became invisible.

This because array is passed along as reference which means even if you reassign it, there is only one array in the memory and all of your assignments points to a single thing. Try making a deep copy of the object, this will create a new array and no longer modify the same old array.

DPUSet is in devices::startracker::device_unit, not devices::startracker. I don't see it in your screenshots but you probably have use device_unit::DPUSet somewhere in startracker.rs which makes it present but private. Use pub use if you want to re-export DPUSet under devices::startracker.

I had this problem with a view which uses an underlying view. Solved it by just regenerating the view. This was probably due to a change in the underlying view which caused SQL-Server to get lost.

div {
      container-name: image;
      container-type: inline-size;
      width: 200px;
      height: 200px;
}

div>img {
      display: inline-block;
      width: 100%;
      height: 100%;
      line-height: 50cqh;
}

Just replace ? with * to capture all characters.

import re

string = ":example1:q=dfgghp-yoirjl78/-"
print(string)

x = re.sub(r':q=.*','', string)
print(x)

When you press CTRL+C in the finally block the program won't raise another KeyboardInterrupt exception. Instead it will let the finally block get executed first and then once the finally block finishes and if the program is still running the KeyboardInterrupt exception can be raised again.

Also python doesn't allow another exception to be raised when another one is being handled. When an exception occurs, python won't interrupt the handling of that exception with another one until the current exception is fully processed.

Saw Frank's answer and assumed I did not need to do anything, however the Firebase FAQ is suggesting to migrate before the shutdown.

How are the following Authentication features impacted: email link authentication, password reset, and email verification? Email link authentication and your out of band email actions with Firebase will continue to work, however you will need to upgrade to the latest Firebase Authentication SDKs and migrate to the new solution in order to continue using these actions after the Firebase Dynamic Links service is shut down on August 25, 2025.

You can follow the guides linked below for instructions on how to complete the migration: iOS guide Android guide

flutter clean
flutter pub get
cd ios
pod install

I found a solution, involving User 2 is Given permission to the File by

Invite

https://graph.microsoft.com/v1.0/me/drive/items/<itemid>/invite
Body:JSON
{
  "recipients": [
    {
      "email": "Mail Of User 2"
    }
  ],
  "message": "Here's the file that we're collaborating on.",
  "requireSignIn": true,
  "sendInvitation": false,
  "roles": [ "write" ]
}

With this, User2 can download the file at any time without worrying about expiration. using
GET /shares/{shareIdOrEncodedSharingUrl}/driveItem/content https://graph.microsoft.com/v1.0/shares/{shareid}/driveItem/content
this will download the file as user 2 was given permission to the file

it seems to be some how removed so,

    composer require barryvdh/laravel-snappy

write in the terminal this command and the library will installed again

This has happened to me a couple of times in the past and both times it was solved by redownloading / updating the Azure Functions Core Tools and then try again.

https://learn.microsoft.com/en-us/azure/azure-functions/functions-run-local?tabs=macos%2Cisolated-process%2Cnode-v4%2Cpython-v2%2Chttp-trigger%2Ccontainer-apps&pivots=programming-language-csharp#install-the-azure-functions-core-tools

If you want to completely remove the ripple effect, you can customize tabBarButtons in the Tabs screenOptions.

Create your own Pressable component and add android_ripple={{ color: 'transparent' }}.

For better understanding, when Expo is first installed, HapticTab.tsx is created under the components folder. When you add android_ripple={{ color: 'transparent' }}, you'll see that the effect is removed.

i have same problem, how to fix it

Not exactly what you need, but to get a stacked rectangle you can use multi-Process shape. https://mermaid.js.org/syntax/flowchart.html#complete-list-of-new-shapes.

Based on your question (without data and code samples) I could suggest using broadcast join the map of values for filtering.

Will Shuffling Occur? No shuffling will occur if:

The Map is broadcast to executors (e.g., using broadcast() in Spark).

Filtering is applied per partition (e.g., using filter or where with partition keys).

Data is already partitioned by the key used in the Map.

Example Code in Scala

    val df = spark.read.parquet("/path/partitioned_by_country")
    val filterMap = Map("US" -> "North America", "CA" -> "North America")
    val broadcastFilter = spark.sparkContext.broadcast(filterMap)
    val filteredDF = df.filter(col("country").isin(broadcastFilter.value.keys.toSeq: _*))

Put your module in the same directory as your project Note: Not saving your script (still has the name new on it) will automatically make it in the external storage (storage/emulated/0)

curl -sSL https://github.com/ruby/ruby/commit/1dfe75b0beb7171b8154ff0856d5149be0207724.patch -o ruby-302-fix.patch && rvm install 3.0.2 --patch ruby-302-fix.patch --with-openssl-dir=$(brew --prefix [email protected]) && rm ruby-302-fix.patch;

Use group by Service_Name, Price, and Ident while summing the Qty and Value.

SELECT 
Service_Name, 
Price, 
SUM(Qty) AS T_Qty, 
SUM(Value) AS T_Value, 
Ident
FROM NewOne
GROUP BY Service_Name, Price, Ident
ORDER BY Service_Name;

For small apps → Context API is fine. But, there is some performance issues, If the theme state updates, all consuming components re-render, which may affect performance.If you are looking for alternative you can checkout the below options ,

• For better performance (avoiding re-renders) → Use Zustand.
• For complex apps (with multiple shared states) → Consider Redux Toolkit.

Run the following command in your terminal IN YOU PROJECT ROOT DIRECTORY: If there’s an issue, it will show the exact problem. plutil -lint ios/PlucTv/Info.plist OR plutil -convert xml1 ios/PlucTv/Info.plist

in my case it shows the extra in my code , i removed it and woalaaa, it solved my problem.

Run the command killall XCBBuildService

Finally i have solution with this code

editor.setTextCursorPosition(initialCursor?.targetBlock, initialCursor?.placement);
editor.focus();

I have the same issue, i want to compile different maven proect with different jdk, but it not works, this is my code

@Override
    public void compiler(CompileDTO dto) {
        String originalJavaHome = System.getenv("JAVA_HOME");
        String originalClasspath = System.getenv("CLASSPATH");
        try {
            // 设置新的环境变量
            String newJavaHome = dto.getJdkPath();
            String newClasspath = newJavaHome + "/lib";
            if (newJavaHome != null) {
                System.setProperty("JAVA_HOME", newJavaHome);
                System.setProperty("CLASSPATH", newClasspath);
            } else {
                throw new ServiceException("JDK路径不正确或无法设置环境变量");
            }

            String executeAbleCommand = MavenCommand.EXECUTABLE + newJavaHome + "/bin/javac";
            String classpathCommand = MavenCommand.CLASSPATH + newJavaHome + "/lib";
            MavenCommand.COMMAND.add(executeAbleCommand);
            MavenCommand.COMMAND.add(classpathCommand);
            log.info("开始编译Maven项目，代码路径: {}, 编译参数: {}", dto.getCodePath(), MavenCommand.COMMAND);
            long startTime = System.currentTimeMillis();
            File codeFile = new File(dto.getCodePath());
            if (!codeFile.exists()) {
                throw new ServiceException("代码路径不存在");
            }
            MavenCli cli = new MavenCli();
            System.getProperties().setProperty(MavenCli.MULTIMODULE_PROJECT_DIRECTORY, MavenCli.USER_MAVEN_CONFIGURATION_HOME.getAbsolutePath());

            PrintStream originalErrStream = System.err;
            PrintStream originalOutStream = System.out;

            int statusCode;
            try {
                statusCode = cli.doMain(MavenCommand.COMMAND.toArray(new String[0]), dto.getCodePath(), System.out, System.err);
            } catch (Exception e) {
                throw new ServiceException("执行编译命令失败", e);
            } finally {
                System.setOut(originalOutStream);
                System.setErr(originalErrStream);
            }
            if (statusCode != 0) {
                throw new ServiceException("执行编译命令失败, statusCode: " + statusCode);
            }
            log.info("结束编译Maven项目，编译耗时: {} s", (System.currentTimeMillis() - startTime) / 1000);

        } finally {
            // 恢复原始的环境变量
            if (originalJavaHome != null) {
                System.setProperty("JAVA_HOME", originalJavaHome);
            } else {
                System.clearProperty("JAVA_HOME");
            }
            if (originalClasspath != null) {
                System.setProperty("CLASSPATH", originalClasspath);
            } else {
                System.clearProperty("CLASSPATH");
            }
        }

command log:编译参数: [clean, compile, -Dmaven.test.skip=true, --batch-mode, -T 2C, -Dmaven.compiler.executable=/opt/jdk1.8.0_202//bin/javac, -Dmaven.compiler.classpath=/opt/jdk1.8.0_202//lib]

but log error is: Could not find artifact jdk.tools:jdk.tools:jar:1.6 at specified path /usr/lib/jvm/java-11-openjdk-11.0.12.0.7-0.el7_9.x86_64/../lib/tools.jar -> [Help 1]

/usr/lib/jvm/java-11-openjdk-11.0.12.0.7-0.el7_9.x86_64/ is internal jdk path, not my jdk path

For some reason, as Sylvav said, "pip install lit" did worked for me.

I have used this command "adb shell am start -n "/leakcanary.internal.activity.LeakActivity"" in adb ,leak canary app opened up ,but what to do to copy the stack trace .

When I was trying to read the Sign Language Digit Dataset

print('\n'.join(os.listdir('..\deep_algo\input'))) output: X.npy, Y.npy

did not understand, could somebody explain like ELI5?

Okay, I've tried a bit more and got success.
Both user_data and config files lies in %project_name% folder, where main bot.py file is.
I changed user_data path to simple "DATA_FILE: "user_data.json", and edited the code to:

CONFIG_FILE = "config.json"   # <- changed here

def load_config():
  if not CONFIG_FILE:         # <- and here
    return {}
  with open(CONFIG_FILE, 'r', encoding='utf-8') as file:
    return json.load(file)

Just a small addition for those using Fish shell

~/.config/fish/config.fish

if status is-interactive
and not set -q TMUX
    tmux a || tmux
end

In the bottom right corner of Notepad++ there is a little indicator that says OVR or INS. Just click on that little indicator to toggle it. No need to look for any key on your keyboard. I use a Macally which does not have an Insert key. It took me a bit of research to figure out how to undo the change.