SQL Server 2005 and later all support sys.tables

select * from tempdb.sys.tables

note: You can access all Global Temporary Tables (prefixed with ##), but only your own session's Local Temporary Tables (prefixed with #). Remember, stored procedures use separate sessions.

It depends if you have experience with OOP or MVC frameworks or not. If not, I recommend you to start with OOP fundamentals and have a good resource tutorial, you can check laracasts they are the recommended training partner. Also there are good youtube tutorials on lot of channels which you are explore. Once you gain the basic understanding you can migrate your project.

Sharing few resources to you.

https://www.youtube.com/watch?v=1NjOWtQ7S2o&list=PL3VM-unCzF8hy47mt9-chowaHNjfkuEVz

https://www.youtube.com/watch?v=ImtZ5yENzgE&pp=ygUQbGFyYXZlbCB0dXRvcmlhbA%3D%3D

Zip file [...] already contains entry 'res/drawable/notification_bg.xml', cannot overwrite

This helped me:

packagingOptions {
        exclude 'AndroidManifest.xml'
        exclude 'resources.arsc'
        resources.excludes.add("res/drawable/*")
        resources.excludes.add("res/layout/*")
    }

Можно установить требуемый пакет

dnf install redhat-rpm-config

You can use a blend, create a table for filtered for each type of waste ( upto 4) and use an outer join to connect them. you have not provided enough information for me to provide an example.

SELECT * FROM table_name ORDER BY id DESC LIMIT 1;

If you define batch_size before initializing your model, such as:

batch_size = hp.Int('batch_size', min_value=1, max_value=10, step=16)
model = Sequential()

then it works.

We experience the same issue off and on. Usually renaming the store procedure that the report is running fixes the issue. However, it's really annoying and would like to know what the cause is.

You're reading data too fast, and the serial input is not guaranteed to end cleanly with \n before your code tries to process it, and that’s why you are getting incomplete or "corrupted" lines.

1. Use a dedicated thread for serial reading

Tkinter is single-threaded. If you read from a serial in the same thread as the GUI, the GUI slows down (and vice versa), especially when you move the window.

Run the serial reading in a separate thread, and put the valid data into a queue.Queue() which the GUI can safely read from.

import threading
import queue

data_queue = queue.Queue()

def serial_read_thread():
    read_Line = ReadLine(ser)
    while True:
        try:
            line = read_Line.readline().decode('utf-8').strip()
            parts = [x for x in line.split(",") if x]
            if len(parts) >= 21:
                data_queue.put(parts)
            else:
                print("⚠️ Invalid line, skipped:", parts)
        except Exception as e:
            print(f"Read error: {e}")

Start this thread once at the beginning:

t = threading.Thread(target=serial_read_thread, daemon=True)

t.start()

2. In your Tkinter loop, check the queue

Use after() in Tkinter to periodically fetch from the queue and update the UI:

def update_gui_from_serial():
    try:
        while not data_queue.empty():
            data = data_queue.get_nowait()
            print(data)
    except queue.Empty:
        pass
    root.after(50, update_gui_from_serial)  

Please let me know if this works and if you need any further help! :)

You can use QSignalSpy from the QTest module:

QNetworkRequest re;
// ... 
QNetworkReply * reply = m_netManager->get(re); 
QSignalSpy spy(reply, &QNetworkReply::finished);
bool ok = spy.wait(std::chrono::seconds{2});

see https://doc.qt.io/qt-6/qsignalspy.html#QSignalSpy-1

how did u resolve it finally ?? i'm stuck in the same problem.

There is a design pattern published for this. I haven't implemented it myself yet so I can't speak on the nuance but as advertised it does scim provisioning of users via Okta. Same concept could conceptually be applied to other tech stacks.

https://github.com/aws-samples/amazon-connect-user-provision-with-okta

Try flutter_background_service
https://pub.dev/packages/flutter_background_service/example

This is probably the best example that I have found. Its not the exact tech stack you are looking for but provides good guidance on how to do it; you'll have to take the concepts and make it work with your tooling of choice.

https://github.com/aws-samples/amazon-connect-gitlab-cicd-terraform

It is really complex.

I'm using these selections:

1)Eclipse IDE for C/C++ Developers (includes Incubating components),Version: 2025-03 (4.35.0),Build id: 20250306-0812

2)MSYS2 (msys2-x86_64-20250221)

3)install MinGW as suggestion:

local/gcc-libs 13.3.0-1
    Runtime libraries shipped by GCC
local/mingw-w64-ucrt-x86_64-gcc 14.2.0-3 (mingw-w64-ucrt-x86_64-toolchain)
    GNU Compiler Collection (C,C++,OpenMP) for MinGW-w64
local/mingw-w64-ucrt-x86_64-gcc-libs 14.2.0-3
    GNU Compiler Collection (libraries) for MinGW-w64
local/mingw-w64-x86_64-gcc 14.2.0-3 (mingw-w64-x86_64-toolchain)
    GNU Compiler Collection (C,C++,OpenMP) for MinGW-w64
local/mingw-w64-x86_64-gcc-libs 14.2.0-3
    GNU Compiler Collection (libraries) for MinGW-w64

(I don't know if I need to select ucrt or x86_64 version)

4)install wxWidgets in MSYS2:

local/mingw-w64-ucrt-x86_64-wxwidgets3.2-common 3.2.7-1
    Static libraries and headers for wxWidgets 3.2 (mingw-w64)
local/mingw-w64-ucrt-x86_64-wxwidgets3.2-common-libs 3.2.7-1
    wxBase shared libraries for wxwidgets 3.2 (mingw-w64)
local/mingw-w64-ucrt-x86_64-wxwidgets3.2-msw 3.2.7-1
    A C++ library that lets developers create applications for Windows, Linux and UNIX (mingw-w64)
local/mingw-w64-ucrt-x86_64-wxwidgets3.2-msw-libs 3.2.7-1
    wxMSW shared libraries for wxwidgets 3.2 (mingw-w64)

I can create "hello world" application and run it with Eclipse(C++ Managed Build).

But, when I turn to wxWidgets, blocked at the first line:

#include <wx/wx.h>

'wx/wx.h' file not found [pp_file_not_found]

The directory definition is right,and the file exists.

But I did not configure the wxWidgets(in Eclipse) indeed after installed in MSYS2,for I don't know what to do.

The other lines like "wx/...." will trigger the same error if I replaced "#include <wx/wx.h>" with absolute path.

I have searched web ,I saw there are many configuration need to finish in Eclipse if installing wxWidgets directly, should I do the same work after installed them in MSYS2?

Thanks for help.

Set the reraise=True on the retry. This will make it raise the last exception it captured instead of the RetryException.

@retry(stop=stop_after_attempt(6), wait=wait_fixed(5), reraise=True)

Polling messages from Amazon SQS seems simple — until it’s not. You need to continuously fetch messages, process them concurrently, delete the successful ones, and retry failures with appropriate delays. Getting this right, especially at scale, means dealing with multithreading, visibility timeouts, and reliability — often with verbose or heavyweight tooling.

Libraries like Spring’s SQS support exist, but they come with trade-offs: vendor lock-in, complex dependency graphs, and upgrade pains that stall your agility.

That’s exactly why I built java-sqs-listener — a small, focused library designed for reliability without the bloat.

👉 View the GitHub repo

📦 Check it out on Maven Central

📂 Explore the Spring Boot Example

Disclaimer: I’m the author of this library.

They way is done now is quite confusing, on a single repo it is not evident to find how you can push tags, I would expect to have an option at least to push tags automatically. On multi-repo the menu is gone and you're left in the dark on how to get your tags to the remote. Microsoft could clean up their act a bit on this.

The problem in my case was, that I had a "choice"-type column and tried to send a value to it that wasn't a valid choice.

See Chris' link. All of the other documentations say that there is an Event tab. Use the Compile Tab. The button is on the right. Project MB3 - Properties - Compile, Build Events

if you change the part where you are testing the time over 60 minutes to the following it will handle using different add time parameters

IF %timeminute% GEQ 60 (

set /a timeminute=%timeminute% - 60

set /a timehour=%timehour% + 1

IF %timeminute% lss 10 set timeminute=0!timeminute!

)

The InkWell doesn't have margin/padding. the Card on the other hand does have a default margin

Card(
  margin: EdgeInsets.zero,
  child: Container(),
);

turns out this is a safety issue (software compatible issue). in clickhouse, there's an option to
set output_format_json_quote_64bit_integers = 0
and it will work correctly

Oh, okay. My version of django doesn't support that format.

To move an Azure App Service to another existing App Service Plan, follow these steps:

1. Ensure both plans are in the same resource group and region.

2. Disable VNET integration if configured.

3. Navigate to "App Services" in the Azure portal and select your app.

4. Under "App Service Plan," select "Change App Service plan" and choose the target plan.

5. Confirm and move the app.

For more details, refer to the official documentation.

You may try this way :

Install "pipx" if not already installed:

sudo apt install pipx

Then install the package:

pipx install keyboard

You can extract from Mac terminal using

tar -xzvf .jar

I faced a similar problem

Can you tell me if you managed to solve it?

Bruno has a feature for this: https://docs.usebruno.com/auth/oauth2-2.0/client-credentials

You can enter the Access Token URL and your Client ID and Secret and how the token should be used. Also you can check the "Automatically fetch token if not found" tick to do this automatically before your actual request if needed.

You're almost there! To enable multi-turn search, you need to include a conversation object and maintain a conversation_id across queries. The official docs are sparse, but the key is managing that context in SearchRequest. Hope Google updates their docs soon!

Fixed by removing encryption hash.

I also encountered the same error. I have a training pipeline where firstly fine-tuning a DistilBERT model from HuggingFace and then further tune my custom layers. I was wondering how it relates to the loss and metrics used. Is it fine to use these?

loss="binary_crossentropy"

and

metrics=["accuracy"]

And by the way, could anyone please check what's happening for me with this error? I have no clue. Thank you guys!

My model:

def build_model(hp):
    inputs = tf.keras.layers.Input(shape=(X_train_resampled.shape[1],))  # (None, embedding_size)
    
    # Additional Layers
    x = tf.keras.layers.Reshape((3, -1))(inputs)

    # Bi-directional LSTM Layer
    x = tf.keras.layers.Bidirectional(
        tf.keras.layers.LSTM(
            units=hp.Int("lstm_units", min_value=64, max_value=256, step=64),
            return_sequences=False
        )
    )(x)

    # Dropout Layer
    x = tf.keras.layers.Dropout(
        rate=hp.Float("dropout_rate", 0.1, 0.5, step=0.1)
    )(x)

    # Dense Layer
    x = tf.keras.layers.Dense(
        units=hp.Int("dense_units", min_value=32, max_value=256, step=32),
        activation="relu"
    )(x)

    # Output
    outputs = tf.keras.layers.Dense(1, activation="sigmoid")(x)

    model = tf.keras.Model(inputs=inputs, outputs=outputs)

    # Build the Model with dummy data
    model(tf.zeros((1, X_train_resampled.shape[1])))

    # Compile the Model
    model.compile(
        optimizer=tf.keras.optimizers.Adam(
            learning_rate=hp.Float("learning_rate", 1e-5, 1e-3, sampling="LOG")
        ),
        loss="binary_crossentropy",
        metrics=["accuracy"]
    )
    return model

My Tuning:

kf = KFold(n_splits=5, shuffle=True, random_state=42)

best_val_acc = 0.0
best_model_path = None
bestHistory = None
bestFold = None

for fold, (train_index, val_index) in enumerate(kf.split(X_train_resampled)):
    print(f"\nCustom Classifier Fold {fold + 1}")

    X_train_fold, X_val_fold = X_train_resampled[train_index], X_train_resampled[val_index]
    y_train_fold, y_val_fold = y_train_resampled[train_index], y_train_resampled[val_index]

    train_fold_dataset = tf.data.Dataset.from_tensor_slices((X_train_fold, y_train_fold)).batch(4)
    val_fold_dataset = tf.data.Dataset.from_tensor_slices((X_val_fold, y_val_fold)).batch(4)

    tuner = Hyperband(
        build_model,
        objective="val_accuracy",
        max_epochs=CUSTOM_EPOCHS,
        directory=os.path.join(TRAINING_PATH, "models"),
        project_name=f"model_2_custom_classifier_fold_{fold + 1}"
    )

    # Monkey patch to bypass incompatible Keras model check
    def patched_validate_trial_model(self, model):
        if not isinstance(model, tf.keras.Model):
            print("⚠️ Model is not tf.keras.Model — bypassing check anyway")
            return
        return

    # keras_tuner.engine.trial.Trial._validate_trial_model = patched_validate_trial_model
    keras_tuner.engine.base_tuner.BaseTuner._validate_trial_model = patched_validate_trial_model


    tuner.search(
        train_fold_dataset,
        validation_data=val_fold_dataset,
        epochs=CUSTOM_EPOCHS
    )

    best_hp = tuner.get_best_hyperparameters(1)[0]
    print(f"✅ Best hyperparameters for fold {fold + 1}: {best_hp.values}")

    model = build_model(best_hp)

    # print the model's summary after complex modifications
    print("Model summary after hyperparameter tuning:")
    model.summary()

    history = model.fit(train_fold_dataset, validation_data=val_fold_dataset, epochs=CUSTOM_EPOCHS)

    val_acc = history.history['val_accuracy'][-1]
    model_save_path = os.path.join(TRAINING_PATH, "models", f"custom_classifier_fold_{fold + 1}")
    if val_acc > best_val_acc:
        best_val_acc = val_acc
        best_model_path = model_save_path
        bestHistory = history
        bestFile = fold

    model.save(os.path.join(TRAINING_PATH, "models", f"custom_classifier_fold_{fold + 1}.h5"))

if best_model_path:
    print(f"Saving the best model from fold with validation accuracy: {best_val_acc}")
    best_model_path = os.path.join(TRAINING_PATH, "models", f"BEST_custom_classifier.h5")
    model.save(best_model_path)
    print(f"✅ Best model saved at: {best_model_path}")

    modelType = "Custom Layers"
    plot(bestHistory, fold, modelType)
    print(f"✅ Convergence plots saved for {modelType} at fold {bestFold + 1}.")

Thanks for your time here!

In pubspec.yaml file override dependency as shown below:

dependency_overrides: 
  agora_rtm: ^2.2.1
  iris_method_channel: ^2.2.2

If you want to change the background of a paper on runtime:

paper.options.background = { color: '#FF0000' };
paper.render()

Testet with jointjs v4.1

sfdsfdsfdsf drfg dfgdfgfd mkznsc,k lkdnjas klasdk hnjasdkl dhjas klihjasdlasjdliajsdolijau dapisdu as o;lqkdw; kd pqwid pq[wie[qwke[pqw e[qwie0[ qiweo[ qkiwe queiq][we wo

use this-> location.href = './home'; instead of this-> this.router.navigate(['./home']);

As a temporary solution, avoid using Turbopack and run the development server with next dev instead. More details available here: https://github.com/vercel/next.js/issues/77522

. Jsjsjsnkz jsd sjsiie s ejeje sjhhd Sjjdjd. Djsjrjd. Jejeie Uejdjejeb jejeie ek ejeie I

The problem is not that the path is wrong, but the fact you put it next to your main.ts. ThreeJS treats the binary .glb file as a static asset, this means they have to be in the /public/ directory to be able to work in your browser. So the solution is to put it in the public folder of your project structure.

Hey I am facing the same issue. Did you find a solution to it?

For anyone who is still experiencing this issue, this helped me:

cd ios
rm -rf ~/Library/Caches/Cocoapods
rm -rf ~/Library/Developer/Xcode/DerivedData
pod deintegrate
pod setup
pod install

Found the answer here. Editing the IAP description in Monetize with Play -> Products -> In-app products fixed the permission error.

If you are using ESLint 9's Flat Config, please configure it like this:

import { flatConfig as pluginNext } from '@next/eslint-plugin-next';

export default [
    // ...
    pluginNext.coreWebVitals,
    // ...
];

Why write it this way? Take a look at the @next/eslint-plugin-next source code. It's very easy to understand.

I was facing the same issue and tried several solutions, but nothing worked. Finally, I decided to install a different version of Node.js. Previously, I was using Node 16, but after switching to Node 18 using NVM, everything started working smoothly.

If you don't have NVM, I recommend uninstalling your current Node.js version and then installing the same or a new version. It should work for you as well!

I found this one is a bit long-winded but seems to work:

^(?!BG|GB|NK|KN|TN|NT|ZZ)[a-ceghj-pr-tw-zA-CEGHJ-PR-TW-Z][a-ceghj-pr-tw-zA-CEGHJ-NPR-TW-Z]([ ]{1}|)[0-9]{2}([ ]{1}|)[0-9]{2}([ ]{1}|)[0-9]{2}([ ]{1}|)[a-dA-D]$

Allows for upper or lower case, and allows optional space between first two letters and numbers, allows numbers with optional spaces between groups of two, and an optional space before the last letter.

Or just pass a string literal, then equals should work correctly

assertThat(obj.getTotal()).isEqualTo(BigDecimal.valueOf("4.00"))

You have break statements in nested loops: This means that when your alpha-beta pruning triggers it only exits the inner for-loop. Have it return the value there instead.

Try using this version, it should resolve the issue.

transformers==4.50.3

Another approach without helper columns:

=COUNTIFS($E$2:$E$7,E2,$F$2:$F$7,F2)+COUNTIFS($E$2:$E$7,F2,$F$2:$F$7,E2)

Result:

I tried this method but the problem is still the same, please help My site link StapX

After several weeks of discussion with Microsoft, it appear that this is because Warehouse doesn't support Multiple Active Result Sets (MARS). Setting MultipleActiveResultSets=0 in option resolve the problem.

so, the final method for me was :

        $connectionParams = [
            'dbname' => 'my_DBname',
            'user' => [email protected]',
            'password' => 'mypassword',
            'host' => 'xxxxxxxxxxxxxx.datawarehouse.fabric.microsoft.com',
            'driver' => 'pdo_sqlsrv',
            'port' => 1433,
            'driverOptions' => [
                'Authentication' => 'ActiveDirectoryPassword',
                'MultipleActiveResultSets' => 0,
                'Encrypt' => 1,
                'TrustServerCertificate' => true
            ]
        ];
        $this->conn = \Doctrine\DBAL\DriverManager::getConnection($connectionParams);

GridDB supports pagination using LIMIT and OFFSET. You can adjust the OFFSET based on the page number to fetch a limited number of rows per query, improving performance with large datasets.

I fixed it. The issue was the fact that Spring scans for components only within the folder the starting class is located at. After moving it to the main folder everything started working as expected, with Spring's getBean giving me instances of classes I needed.

Try running your script with sudo:

sudo python3 your_script.py

On Linux, pyautogui.click() sometimes requires elevated privileges to simulate mouse clicks, especially on newer Ubuntu versions.

I also ran into it.

Just a guess: When using the mount namespace from a target process (either with "-m" or with "--all" option), it does not have the mount-points from the outside linux system. That means, it only can use processes that are viewable within the target mount namespace.

When using the outside mount namespace, I can run a command like

nsenter -p --target=$(docker inspect -f '{{.State.Pid}}' <container-id>) /bin/bash

For explanation: the docker container I used for this test, is based on a busybox and only has /bin/sh (not /bin/bash) within its mount namespace.

Regards, cwo

https://codeacademycollege.com/

https://fasttrack.lt/

https://cropmarks.lt/

https://autorepairus.com/

Plačiaformatės spaudos paslaugos vienoje vietoje ir viska kita kas cia bus parasyta yra parasyta

In my case branch was there because in my new repo's default branch is not master, it is main, but I tried to checkout to master instead of main :) . So just cross-check the branch weather you have it on your local or not.

"pkg install jython"

My termux got an early install build-essential and python , pip clang gcc and debugger before . I guess u can directly try install jython. The jython package installs openjdk or the javac and java. I dont check yet if there is a jre installed .

Ports to aarch64 is looking for a another jdk when doing configure make i cant relate to that as an installer source looking for jdk? Glibc-runner not workn for me .

Yes it is possible to implement, as parallel function calling is implemented by autogen 0.4 onwards. Ref : https://GitHub.com/micosoft/autogen/discussions/5364

This is not a complete answer to this question, however this minimal code example is able to reproduce the Invalid Handle error.

Ths example is using the ximea python API.

from ximea import xiapi

cam = xiapi.Camera()
cam.open_device()
cam.close_device()

cam.set_framerate(30.0)

This has different behaviour to the following code:

from ximea import xiapi

cam = xiapi.Camera()
cam.set_framerate(30.0)

Both example raise an error because the Camera.set_framerate function is raising an error, however something about the initialising and the de-initalising of the camera sets up the Camera object correctly so that the (? Correct) Invalid Handle error is returned instead of the ERROR 103: Wrong parameter type error being returned

I figured out the issue. The problem was less power supply so I added 12v power hub and connected my lidar to the hub. Solved the issue!

Yes, but for some reason it's undocumented. Here it is:

https://github.com/login/oauth/.well-known/openid-configuration

I don't think there is direct way to get all messages from teams channel. Here I am telling work around that work for me. I created one microssoft list and I store all the messages there whenever there is new message add to tems channel my power automate flow calls itself and populate the list and from the list I can filter what exactly I want to get.

Try using jinja template. And dynamically filter the data in the query using current user email jinja template

The github repo cufarvid/lazy-idea aims to replicate the LazyVim mappings in the .ideavimrc.

You may just want to use this Github repo: https://github.com/emmveqz/grpc-web-native

It covers:

• Streaming, for both requests and response

• Binary payloads (not Base64 text)

• It uses browser's native AbortController, and HTTP/2

Try specifying the Fully Qualified Name Space as a URL in your app settings/Environment Variables:

AzureServiceBusConnection__fullyQualifiedNamespace: https://{ServiceBusNamespaceName}.servicebus.windows.net:443/

Instead of using pip3 install mmcv

I pip3 uninstall mmcv,

install pip3 install openmim
and then mim install mmcv fixed the problem (you can also specify the target version)

Right, Images smaller than 100kb might work fine, but I'm not sure about the maximum file size.

Directory/path management in ruby is very clunky due to historical reasons.

I've found success in using File.expand_path to expand the full path correctly relative to the current directory __dir__ (/Users/you/ProjectRoot/fastlane/)

File.read(File.expand_path("./shared_metadata/release_notes.txt", __dir__))

In Main.jsx, you're not rendering your <App />:

ReactDOM.createRoot(document.getElementById('root')).render(
  <React.StrictMode>
    <App />
  </React.StrictMode>
);

I fixed this error by including the "src" folder in tsconfig.json file which contains .ts file.

To jump behind the last character in insert mode (especially when the End button isn't available as a user described above) there is a way without having to add any extra functionality to the .vimrc.

By pressing Ctrl + O first and then $ the cursor is placed behind the last character of the line.

You're likely right. Epic FHIR R4 API usually doesn't have a direct Create endpoint for Encounter. Encounters are typically created automatically by Epic's internal workflows (like appointment check-in).

For integration:

1. Interact with related resources (like Appointment).

2. Monitor their status.

3. Use FHIR Search to find the created Encounter.

Check your specific Epic documentation and consult healthcare IT experts for definitive answers, as custom implementations might vary.

Something like (code not tested) :

SELECT      c.Firstname,
            c.LastName,
            count(*) as the_count
FROM    Users c
JOIN    ViewedPlayers p ON p.CreatedByCharacterID = c.ID
GROUP BY c.Firstname, c.LastName
ORDER BY count(*) DESC

detect_new_folders:
  stage: detect
  script:
    - git fetch --unshallow || true
    - git fetch origin
    - echo "Detecting newly added directories in the current commit..."
    - |
      PREV_COMMIT=$(git rev-parse HEAD~1)
      CURR_COMMIT=$(git rev-parse HEAD)
      echo "Previous commit: $PREV_COMMIT"
      echo "Current commit: $CURR_COMMIT"

      # Get added files only
      ADDED_FILES=$(git diff --diff-filter=A --name-only "$PREV_COMMIT" "$CURR_COMMIT")
      echo "Added files:"
      echo "$ADDED_FILES"

      # Extract top-level directories from the added files
      NEW_DIRS=$(echo "$ADDED_FILES" | awk -F/ '{print $1}' | sort -u)

      if [ -z "$NEW_DIRS" ]; then
        echo "no new folders" > new_folders.txt
        echo "No new folders found."
      else
        echo "$NEW_DIRS" > new_folders.txt
        echo "New folders detected:"
        cat new_folders.txt
      fi
  artifacts:
    paths:
      - new_folders.txt
    expire_in: 1 hour

This is because the "each" variable from EL is only available during the component creation phase,

While data binding is parsed during the event phase, meaning that EL variables like "each" are not accessible at that time.

If you want to differentiate each button's calling, please change to use <forEach> component and create a common command like @command("invokeMethod") and pass a parameter.

For example:

<forEach items="${vm.indexes}">
    
<button label="Button ${each}" onClick="@command('invokeMethod', param=each)"/>

</forEach>

Thanks

You can also cast the whole function inside of mockImplementation as typeof somefn.

For example here it was picking incorrect overload and complaining about () => of(true);

This helps:

jest.spyOn(dialog, 'confirm').mockImplementation((() => {
  return of(true)) as typeof dialog.confirm;
});

  "error": {
      "message": "Failed to decrypt: facebook::fbcrypto::CryptoInvalidInputException: Decryption operation failed: empty ciphertext",
      "type": "OAuthException",
      "code": 190,
      "fbtrace_id": "AHu1l8jLxWEYWpbXs_yJrvm"
   }
}

You may want to check out this Github repo: https://github.com/emmveqz/grpc-web-native

It covers:

• Streaming for both requests and response

• Binary payloads (not Base64 text)

• It uses browser's native AbortController and HTTP/2

None of the above answers are satisfactory. My guess is that many beginners in R would have the same question and they deserve a clear and complete answer.

In maths, the trace of a matrix is defined only for squared matrix and the canonical way to compute the trace of a matrix in R is

sum(diag(x))

In particular:

• it is against all recommendations to use such unexported functions as stats:::Tr().
• the function matrix.trace() of the package matrixcalc has no added value.
• the function tr() of the package psych is, as described by the authors, doing exactly sum(diag()).
• writing a function to test that an object is squared or numeric is useless since the error messages thrown by sum(diag()) are clear in this matter.
• using eigenvalues is incredibly complex for such a simple operation.

It is therefore strongly recommended to stick with sum(diag()) which is simple and efficient even for very large matrices. sum() is a primitive function and the complete code of diag() is available here.

I ran into the same exact issue when doing the following

    final Runnable callback = // Some method which provides a callback that sends a mail

    final CompletableFuture<Void> notifyUsersFuture = CompletableFuture.runAsync(callback).exceptionally(throwable -> {
        LOGGER.error(throwable.getMessage());
        return null;
    });

Issue occurs due to the way the thread is created.

The application context might not be loaded in the threads created by parallel stream.

In order for the application context to be loaded correctly, I used the spring @Async annotation instead to run the process asynchronously and the issue is resolved.

For your case you can simply do

reports.stream().forEach(it -> {
  creationProcess.startCreationProcess(it);
})

@Async
void startCreationProcess(final Report report) {
    // Your logic
}

You are on the right path by searching for Android TV through the ping sweep, but with it pairing (especially if it is a Google Cast device) is not as simple as opening socket on port 8009. It uses the port encrypted TLS and Cast Protocol (Protobuf-based). The Flutter/dart does not basically support it. To make the pair properly, you will need to use platform channels and apply a pairing logic using the native cast SDK on Android.

I hope my answer was helpful to you!

Based on this answer to a similar question, what I'm after doesn't seem to be possible: https://stackoverflow.com/questions/1919130/mercurial-how-can-i-see-only-the-changes-introduced-by-a-merge

You can create the overlay by having an absolute view next to the camera. If you add pointerEvents="none" to it, it should not interfere with the camera itself. Secondly, you can reduce the resolution of a photo with useCameraFormat. This already reduces the size a bit. If you want it to be even lower, you could look into the snapshot or quality balance. See documentation. takeSnapshot allows you to reduce the quality

Sample table (please provide this in future):

q)trade_usq:([] price:0n 99 98 97;size:1 2 0N 4;id:`a`b`a`b;ex:`c`c`d`d)
q)trade_usq
price size id ex
----------------
      1    a  c
99    2    b  c
98         a  d
97    4    b  d

q)select sum size by ticker:((string[id],'"."),'string[ex])from trade_usq where any not null(size;price)
ticker| size
------| ----
"a.c" | 1
"a.d" | 0
"b.c" | 2
"b.d" | 4

Using table can then confirm @s2ta answer provides the expected output:

q)w:enlist (any;(not;(null;(enlist;`size;`price))))
q)a:enlist[`size]!enlist(sum;`size)
// Key change: for ,' you need to keep , and not replace with enlist:
q)b:enlist[`ticker]!enlist ((';,);((';,);(string;`id);".");(string;`ex))
q)?[trade_usq;w;b;a]
ticker| size
------| ----
"a.c" | 1
"a.d" | 0
"b.c" | 2
"b.d" | 4

The @soundfix unswear is not full. In the documentation is nothing about this but. The question was:

Imagine we are using xcode 14.5 and it use ios simulator 18.3 ( number does not matter ). Then i update xcode to 14.6 or 15 i do not know. And then Xcode force me download ios Simulator 18.4.

under "Other installed platforms " i already have installed 18.3 but i cannot use it.

What is the sense of this upgrade to reduce downloading upgrading if eventually i am forcing download additional space. Same if I download 8 Gb +8 GB or 16GB in a row.

So I have same questions.

/save main (this is a temporary page)

/save page1 This is page 1 back

/save page2 This is page 2 back

/save main This is the main page! press the buttons below to open sub pages. page 1 page 2

Repairing the VS 2022 and system restart resolved the issue.

For anyone using cloud-based map style, go to your map style > Infrastructure > Polyline > Visibility and turn Visibility OFF. This will successfully hide Equator and the International Date Line.

Map Style Editing

.story {
    display: grid;
    grid-template-columns: 1fr 2fr;
    grid-gap: 10px;
    align-items: stretch;
}

.story-img {
    height: 100%;
}

.story-img img {
    width: 100%;
    height: 100%;
    object-fit: cover;
}

Can I categorize the blogs using author? instead of number of posts?

Like I want to display the blogs written by admin on the homepage and blogs written by other authors on the blog page in wordpress?

Do we have a plugin for this? please suggest. Thank you

Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?Hiding scrollbars via css doesn't work in Safari, how to fix it?

I tried all suggested solutions but didn't work so i decided to do what the error was saying and added a folder for icon and rename my file to icon.png

I have the same issue of redundant CSV files im my google-drive storage, exactly as was descriebd by @Nick Koprowicz ~3 years ago. Was there any update since then in regards to avoiding the CSV files to be created on g-drive? TIA.

Kajal Pareek, it didn't work because you apparently didn't overwrite the file after deleting the row. To overwrite the file, use XLSX.writeFile(workbook, filename);

Thank you very much - it has been bothering me for awhile

data_set["train"]["image"].append(img)
data_set["train"]["label"].append(labels.index(direct))

Instead of

data_set["train"].add_item(n)

it solved my problem, thank you - furas, in the https://github.com/huggingface/datasets/issues/4796 they offered a solution to the problem, but in a more general way + uploading to the hub, for me the essence came down to two line

PS and without

from datasets import Image
feature = Image()
n['image'] = feature.encode_example(n['image'])

You all will regret all the sneaking that you do and did to get water you are and the people who you also had use me to get where they are

If you use logger, pass filter parameter.

Logger(
  printer: PrettyPrinter(
    methodCount: 1,
    printEmojis: false,
    colors: false,
    dateTimeFormat: DateTimeFormat.onlyTime,
    noBoxingByDefault: true,
  ),
  output: _output,
  filter: ProductionFilter(), // here!
);