no need to remove extensions ... in layout.tsx add suppressHydrationWarning like in the down code and the error will disappear. use this
return (
<html lang='en' suppressHydrationWarning>
I had the same problem, but with gradle. The point was in the test itself. After changing asserts and deleting "verify"s all tests passed
Actualy you can't, but i made this script vscode-controls-linux
have look to this tools to generate swift font swift font generation
I liked the post, very interesting and well written, I really needed to know about it thanks. SOUNDOS-SEGC.
the certificate must be installed on the webserver that is serving the API. And reach the server via 443 port, not 7011.
Using the pa class seems to yield more programming in CSS results. Their dissociation only brings more division among developers insights.
In my case, tf.convert_to_tensor(arr) works.
Unfortunately, SD cards are considered external storage and do not support executables.
You need to copy your project or executable to a $HOME subfolder.
Steffen Opel is right, but i offer pass json as one string via cat comand
aws iam simulate-principal-policy \
--policy-source-arn arn:aws:iam::010999287103:user/lolkek \
--action-names iam:GetAccountEmailAddress \
--policy-input-list "$(cat iam_read_only.json)"
You can also get around this error by installing create-tauri-app using cargo instead. The command is cargo install create-tauri-app. You should also run cargo install tauri-cli --version '^2.0.0' --locked while you're at it for tauri dev/build tools.
If nothing works whatsoever above provided then check your url in env.dev or any env . There shd not be any space bw key and values
Example .env.dev file
abcurl : https//:anyway.com
This won't work becoz there's space bw abcurl and colon :
abcurl: https//:anyway.com Thus will work fine
I am facing a similar issue, and to be honest, i just experience modules as a complete mess. The design principles do not simplify anything for the programmer, on the contrary, it completely overcomplicates things. I really wonder if the "advantages" of modules out-phase with the additional complexities. The problem of include file sequence order is now relayed to cmake, which gives you weird errors when there are cyclic dependencies. It is such a mess ...
Hi i need extract this features you know how can i do!??
You Can Use Monkey Patch, But you never change the hard-coded values, which are defined on files.
As per above snippets, its like modified when programming is running based on condition.
I used this simple check for greater than 0.
int key;
if( (argc<2) || (argc>2))
{
printf("Usage: ./caesar key\n");
return 1;
}
else if (atoi(argv[1])==0)
{
printf("Usage: ./caesar key\n");
return 1;
}
else
{
key = atoi(argv[1]);
}
string plaintext = get_string("plaintext: ");
I am still getting the same error. My program exits with error code 1 before prompting for plaintext. Idk, why the CS50 check still tells me timed out.
I can see that the Package option is missing from the New menu.
Here's how to fix it:
Mark the Folder as "Source Root":
Right-click on the java folder (or the folder containing your packages). Select Mark Directory as → Sources Root. Restart IntelliJ:
Go to File → Invalidate Caches / Restart → Invalidate and Restart. Try Again:
Right-click on the com folder (or any folder inside src/main/java). Select New → Package — this option should now appear.
Though I don't think Vueuse is the best solution for you. But I will still give you steps to make it and the suggested solution for you.
If you want to check why it doesn't work. you can follow these steps
npx nuxi@latest module add vueuse or npm i @vueuse/nuxt @vueuse/core// nuxt.config
export default defineNuxtConfig({
modules: [
'@vueuse/nuxt',
],
})
imports: {
presets: [
{
from: "@vueuse/components",
imports: ["UseWindowSize"], // I want to auto import this, I change to `UseWindowSize` or `*` still not working
},
],
},
But remember that no matter how you config, these methods are disabled for auto-import
You can always use them by explicitly import from @vueuse/core.
I think the purpose of your code is to define a div with height = window height - 265px. If that so, the better idea is using css to make it
height: calc(100% - 265px);
for different browser
/* Firefox */
height: -moz-calc(100% - 265px);
/* WebKit */
height: -webkit-calc(100% - 265px);
/* Opera */
height: -o-calc(100% - 265px);
/* Standard */
height: calc(100% - 265px);
you want to do it in [patch.crates-io] section since what you're doing doesn't change transitive dependencies to alloy core
So I fix it by adding new content but not replace them:
[patch.crates-io]
alloy-core = { git = "https://github.com/alloy-rs/core.git", tag = "v0.8.22" }
alloy-dyn-abi = { git = "https://github.com/alloy-rs/core.git", tag = "v0.8.22" }
alloy-json-abi = { git = "https://github.com/alloy-rs/core.git", tag = "v0.8.22" }
alloy-primitives = { git = "https://github.com/alloy-rs/core.git", tag = "v0.8.22" }
alloy-sol-types = { git = "https://github.com/alloy-rs/core.git", tag = "v0.8.22" }
As Wikipedia for UTF-8 states:
It was designed for backward compatibility with ASCII: the first 128 characters of Unicode, which correspond one-to-one with ASCII, are encoded using a single byte with the same binary value as ASCII, so that a UTF-8-encoded file using only those characters is identical to an ASCII file.
Basically, ASCII is a subset of UTF-8 so the encoding just fails if a byte representation of your UTF-8 character is longer than 1 byte.
"If you lose your Jupyter Notebook tabs or session (for example, while using PyCharm), an easy way to recover them is to relaunch Jupyter Notebook from your terminal. Running the jupyter notebook command will restart the server and open the interface at http://localhost:8888/tree, allowing you to access your notebooks again."
Try the Ghost Stage extension for VS Code with Auto Stage.
please try once as attachment "/" symbol to your import path.
package main
import (
"fmt"
"/PulseGuard/backend/golang/services" // Importing this gives an error - add '/' to path
"github.com/fatih/color"
)use list() alongside index()
b = {'a': 'a', 'b':'b', 'c':'c'}
print(list(b).index('a')
output:
0
The issue might be due to another CSS rule with higher specificity overriding your rule. For example, you might have a rule like nav a or a:visited that's causing the underline to appear. You can try increasing the specificity by using:
nav a {
text-decoration: none;
}
If that doesn't work, test by temporarily adding !important:
a {
text-decoration: none !important;
}
This helps determine if another rule is interfering. Usually, adjusting the specificity or order of your CSS rules resolves the issue.
force it with !important :
a {
text-decoration: none !important;
}<nav>
<ul>
<li><a href="index.html">Home</a></li>
<li><a href="about.html">About</a></li>
<li><a href="contact.html">Contact</a></li>
</ul>
</nav>or maybe the problem is that the CSS file isn't linked.
In my case it was an extension. Installed Cody extension which caused Android studio to freeze automatically 10 seconds after startup. Had to quickly open plugins page and uninstall it before it froze again. Took me a few attempts.
I have the same issue , where from the catalina log it is displayed that
02-Mar-2025 10:55:06.454 INFO [http-nio-8080-exec-11] org.apache.catalina.startup.HostConfig.deployWAR Deployment of web application archive [C:\Users....\webapps\ecom-0.0.1-SNAPSHOT.war] has finished in [8,155] ms
but when i try to access my endpoints , it wont be reachable(Got 404).
I fixed it by upgrading the tomcat which matches my java version (21)
Test answer body Test answer body Test answer body Test answer body Test answer body
I was also following this udemy course from in28minutes on mastering Spring microservices too. For me it was 'make sure you start the services in this order (a) netflix-eureka-naming-server (b) netflix-zuul-api-gateway-server (c)currency-exchange-service (d)currency-conversion-service' that fix the problem.
You could try putting the style inline until you are able to get the CSS to work, or in the head section. There could be another more specific rule overriding the simple CSS on the <a tag.
@LoveToCode
My brother, with all the love I can muster, you really shouldn't use libraries you have near zero knowledge on especially without reading the manual - this leads to insecure code
There are many website to convert svg images to svg code. I used website it for easytoolskit. you can try. it is for image processing website, link
Export Data Dumps in Postman (Windows 11):
Safari seems to remember the URL from which the Service Worker was initially installed, and as long as you register the Service Worker with this same address, it imposes a systematic network validation, even with updateViaCache: “all”.
Why does Safari do this?
It's probably a security measure to avoid a scenario where a site registers a Service Worker with updateViaCache: “all”. This Service Worker would never be updated and would remain cached indefinitely, unless the URL changed.
Safari therefore seems to have a different policy from other browsers:
updateViaCache: “all”.As a solution, I added these lines to the previous script :
if (!initialRegistration) {
await navigator.serviceWorker.register('/service-worker.js', { updateViaCache: 'all' });
}
When the client downloads the application for the first time, it doesn't yet have a registered Service Worker, so I register what I call the “initial Service Worker” to set the URL to mydomain.com/service-worker.js. Then, immediately afterwards, I register the Service Worker again (the same one) with a different URL, as this one mydomain.com/service-worker.js?v=NEW_VERSION. This process makes updateViaCache operational as soon as it's installed.
try this:
" resize the window vertically from left/right with the step of 5, m for Modify or More
nnoremap m> 5<C-w>>
nnoremap m< 5<C-w><
Ensure that the tags of related dependencies are consistent
That's logical why it throws 404 because when u're in home page (as a reference) the about page is inside htmlPages folder and that works fine, but when you are in about page it means you are no longer in src folder but instead you are in src/htmlPages it means when you click the about.html link it tries to take you to src/htmlPages/htmlPages/about.html but instead it should take you to src/htmlPages/about.html. So to fix this you should go to your about.html and change the link from htmlPages/about.html into about.html
Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sat 2025-03-01 23:43:18 UTC; 4h 49min ago Docs: man:nginx(8)
setting -> code style -> '$your language' -> wrapping and braces
The issue was resolved with the command :
colima start --cpu 4 --memory 6 --disk 100 --vm-type=vz --mount-type=virtiofs --dns=1.1.1.1
Fixed It I just had to delete and re-install pygame again! Thanks for the help!
This is the PHP version of the MyInfo demo app, originally built in Node.js, showcasing integration with SingPass and usage of the MyInfo API.
remove any other symbols other than alphabets & numbers
in my case the culprit was -
host='localhost', port='8889',
unix_socket='/Applications/MAMP/tmp/mysql/mysql.sock',
answered the problem
Following @Saddles' suggestion I ended up adding:
function SHEET() {
return SpreadsheetApp.getActiveSheet().getIndex();
}
to my sheet's Apps Script library and that seems to have worked.
capture: Video For Windows, DirectShow, Media Foundation
Move Content-Disposition and Content-Type to the file content.
fileContent.Headers.ContentType = new MediaTypeHeaderValue(contentType);
fileContent.Headers.ContentDisposition = new
ContentDispositionHeaderValue("form-data")
{
Name = "\"file\"",
FileName = $"\"{Path.GetFileName(fileFullPath)}\""
};
The workaround is:
import pretty_midi
pretty_midi.pretty_midi.MAX_TICK = 1e10
this seems to work is I add a schema? Maybe there is a more correct way?
df = pl.DataFrame(numbers, schema=['a', 'b'], orient="row")
I've been investigating this issue as well
From the following bug report, it may be an OS bug related to backup where your Application subclass is not launched: https://issuetracker.google.com/u/0/issues/160946170
Possible solutions:
Try this command run :
pip install google-auth-oauthlib
I am the creator of the app in the screenshot.
These are standard NSMenuItems, not custom views.
It is just a NSAttributedString with NSTextTab(type: .rightTabStopType, location: longestTitleWidth) and different text color.
Don't forget to run the function with ().
Check for leading or trailing whitespace in the file name.
This is still true. I have an AWS-hosted django website and was having difficulties generating link previews on LinkedIn (they worked fine on FB). I switched my load balancer TLS setting from 1.3 to 1.2, and voià, good to go.
The issue seemed to be an environmental issue that was bugged. It resolved itself after doing some tests.
Check the Shelly knowledge base for examples. I believe the following is your exact use case:
https://www.shelly.com/blogs/scripts-library/dynamic-load-shedding-script-for-energy-management
as well as examples and snippets on GitHub: https://github.com/ALLTERCO/shelly-script-examples
When drafting scripts directly in the app or through the web-interface of your device there should also be an option to open the library of examples.
are you find some method Answer=?
It looks like you are mixing and matching properties and components.
To my knowledge "apower" is a property of for example a "Switch" component in the Pro 4 PM. See https://shelly-api-docs.shelly.cloud/gen2/Devices/Gen2/ShellyPro4PM
So "Switch.GetStatus" will get properties including apower, voltage and current.
There is a separate voltmeter component for the shelly sensor add-on - though not used on any of the base devices I am aware of. The voltm
For these types of items make sure to always double-check the documentation for the device you are working with.
For example the Shelly Pro 4 PM - does not have voltmeter as a component. Rather it has voltage, power and current as properties of the SWITCH component.
When in doubt "Shelly.GetComponents" should list all the available components on the device.
I got the same issue. I Think it has to do with the NEW EU rules for exchanges and API's. ill let you know when i find the solution.. Would you please do the same? :)
Assuming you are using "BEFORE_COMMIT" transaction phase since you want them to run all in one transaction. When you have a @TransactionalEventListener with phase "BEFORE_COMMIT" implies that there is already an active transaction. You don't need to put another @Transactional annotation. It causes some problems when used with default "AFTER_COMMIT" which is described in detail here, like you mentioned.
Now I have to create a new transaction (REQUIRES_NEW), and if something goes wrong, I can't roll back A entity. Why is this?
No, you don't have to set propagation to "REQUIRES_NEW". You can remove unnecessary @Transactional annotation.
You can also validate if the code is being executed in transaction with the help from:
TransactionSynchronizationManager.isActualTransactionActive()
I had a similar error, turned out i was installing bcrypt instead of bcryptjs on my backend . check your package.json on your backend !
Having the same exact issue. Was working fine and then all of a sudden no matter what I do I get the same error 12 (when I preview or when its published). It was initially an unlisted video and I thought they might have changed something but uploaded the video to another account and made that public and still same thing. Error code 12.
Fish 4.0.0 was recently released, with support for Kitty's comprehensive keyboard protocol.
So if you run Fish 4.0.0 on a terminal that speaks the Kitty protocol, then bind shift+enter "accept-autosuggestion; execute" should work.
Fish 4.0.0 was recently released, with support for Kitty's comprehensive keyboard protocol.
So if you run Fish 4.0.0 on a terminal that speaks the Kitty protocol, then bind ctrl+enter "accept-autosuggestion; execute" should work.
Problem solved, the Kindle hadn't given the app permission to use the storage, once I changed the settings on the device it worked fine. Now all I have to do is make sure to request permission in the app and all is good.
@Azevedo are you looking for something like this:
jq -r '.dependencies | keys[] as $k | "\($k)@\(.[$k])"' < ~/package.json | xargs npm install -g
?
Would the following work for you?
type Piped = { a: true; b: true; c: true };
const result = pipeline.reduce((acc, fct) => ({ ...acc, ...fct(acc) }), {} as Piped);
Of course you can declare the Piped type as an intersection of other types or whatever, but don't make it too complicate.
In this and many duplicates I see that there will at least be few comments which say "don't worry OS will reclaim the memory if/when it needs it". This is plain wrong. If free()/delete do not release memory to the OS by calling brk() or munmap() (depending on how the memory was originally allocated from the OS), OS doesn't know that application doesn't need the memory anymore and it cannot reclaim it. What it can do though is to swap out those pages, but that it can even do when the process is actually using that memory (though it depends on some virtual memory settings). If the process is actually not using that memory it'll never need to be swapped back in which makes the "OS reclaims the memory" illusion more realistic. This also means if you don't have any swap configured in your system (which is true for many perf sensitive systems) then OS can never reclaim memory in this way.
Due to the fact that this result is still common on Google when searching for Geocoding API alternatives to Google due to License, I figured I would answer as well to provide more clarity.
Google Maps and most mapping providers that offer geocoding will not allow this type of usage or any usage really that doesn't involve directly using their Mapping Products.
There are other APIs specifically for this purpose. To name a few:
I'm sure I've missed quite a bit here, but those are ones I can think of immediately that allow you to use them without mapping requirements.
If you are doing USA only, there is also the US Census TIGER/Line Geocoder.
Hat tip to @[email protected] who gave me the answer on Mastodon.
buildNpmPackage inherits from mkDerivation, so you can just get the directory by overriding postInstall.
buildNpmPackage rec {
npmDepsHash = "sha256-+4lLBQ+UQ2XT0wwE6jADxG1UNZjLkQCLvvN1SdiUwZY=";
pname = "mysite";
src = fs.toSource {
root = ./.;
fileset = sourceFiles;
};
postInstall = ''
cp -rv public/ $out
'';
version = "0.0.1";
My case was McAfee VPN. Disabling it solved the problem. I'm using Windows 11 on ASUS Core Ultra 9 285H laptop.
friend- this is an open-ended question that's not suitable for this forum. These questions are meant to be specific and problem-based, with a limited number of potential solutions. Best of luck with your graduation.
This issue doesn't sound like Python's fault, but more your IDE. Try factory resetting your IDE / completely reinstalling it from the source. A flashing black screen is also a way you can configure windows to show notifications, I believe. Check that setting as well.
The base class and its derived class have different destructor names
Destructors don't have names. Like constructors, they're referred to via the name of the type being constructed or destroyed, but they are not regular functions and don't have regular function names.
Could you explain what happens when a destructor is declared as a virtual function?
It just tells the compiler that the destructor is virtual. Nothing "happens" at declaration time.
If you mean what happens when an object with a virtual destructor is destroyed, then the answer is virtual dispatch.
Unlike a regular function, the dispatch is to the most derived type's destructor, rather than the most derived method override with the same name, because destructors are not regular functions and don't have regular function names.
Check your antivirus software. In my case, the WSA is blocked by AVG and being quarantined.
self.viewclass = 'Label'
self.layout_manager = RecycleBoxLayout(
orientation='vertical',
default_size=(None, 56),
default_size_hint=(1, None),
size_hint_y=None
)
self.add_widget(self.layout_manager)
But it is wrong
Correctly
self.layout_manager = RecycleBoxLayout(
orientation='vertical',
default_size=(None, 56),
default_size_hint=(1, None),
size_hint_y=None
)
self.add_widget(self.layout_manager)
self.viewclass = 'Label' # after add_widget
enter code herethis is the only way I was able to download
"
pip install pyqt5
pip install pyqt6
pip install pyqt-tools
"
enter the commands one at a time )
What you experience is a expected. From the specification under "Names":
A simple name only is specified (a name that contains no dots). In this case the namespace is taken from the most tightly enclosing named schema [...]
In general it is better to give all your named types a namespace, as one cannot reference a named type without a namespace from a type that does have a namespace.
Hi I resolved it by installing exactly required NDK version as in error message
So finally i have resolved the issue. so instead of using
import { useSendTransaction } from "thirdweb/react";
use the following
import { sendAndConfirmTransaction } from "thirdweb";
sendAndConfirmTransaction waits for the transaction to approve and then moves forward and that allows the proper waiting and then the transfer function goes well.
use it like as follows
await sendAndConfirmTransaction({
transaction: tx,
account,
});
This is working for me and it is based on modified version of this:
Is there a way to loop through a table variable in TSQL without using a cursor?
As you can see, no more Cursors! HTH someone!
DECLARE @target_state CHAR(4)
DECLARE @geom_state geography
DECLARE @distance FLOAT = 482803; -- A distance in metres 482803 = 300 miles
declare @RowNum int, @State_ID int
select State_ID=MAX(State_ID) FROM [dbo].[gis_US_States_GeoJSON] --start with the highest ID
Select @RowNum = Count(*) From [dbo].[gis_US_States_GeoJSON] --get total number of records
WHILE @RowNum > 0 --loop until no more records
BEGIN
select @target_state = STUSPS, @geom_state = State_Boundaries_geog
from [dbo].[gis_US_States_GeoJSON] where State_ID= @RowNum
INSERT INTO dbo.gis_shell300_imls (MID)(SELECT m.MID
FROM dbo.gis_MuseumFile2018_File1_Nulls m , dbo.gis_2022_gaz_zcta_national z
WHERE
@geom_state.STContains(z.ZCTA_Centroid_Geography) = 1)
set @RowNum = @RowNum - 1 --decrease count
END
None worked actually. I’m using Zoho mail
Here is an improvement of @Matus' answer which eliminates the hard-coded constants. The hard-coded constants are not correct in all situations (monitor resolution, Windows versions, personalization settings).
This code answers the question about calculating the size (and position) of the maximized window. It leaves some things to be desired, but they are outside of the scope of the question:
Maximizing has been disabled, because the standard maximization covers the taskbar.
Resizing has been disabled, because if you do so, it is hard to restore it to exactly the maximized size.
The user can move the Window, causing it to be partly outside of the screen. (For this, see WPF disable window moving)
It does not take into account multiple monitors.
public partial class MainWindow : Window { public MainWindow() { InitializeComponent();
// Settings for WindowsStyle.SingleBorderWindow, ThreeDBorderWindow, ToolWindow:
WindowStyle = WindowStyle.SingleBorderWindow;
WindowState = WindowState.Normal;
ResizeMode = ResizeMode.CanMinimize; // Disallow maximizing and resizing
double differenceX = SystemParameters.MaximizedPrimaryScreenWidth - SystemParameters.WorkArea.Width;
double differenceY = SystemParameters.MaximizedPrimaryScreenHeight - SystemParameters.WorkArea.Height;
Left = -differenceX / 2;
Top = 0;
Width = SystemParameters.MaximizedPrimaryScreenWidth;
Height = SystemParameters.MaximizedPrimaryScreenHeight - differenceY / 2;
// Settings for WindowsStyle.None:
//WindowStyle = WindowStyle.None;
//WindowState = WindowState.Normal;
//Left = 0;
//Top = 0;
//Width = SystemParameters.WorkArea.Width;
//Height = SystemParameters.WorkArea.Height;
}
}
I tried your script but as you can see from the images below basically the blue line stays in position.
this is like really old but just right click on the three dots on the same bar then "RESET MENU" 😃
Accpac is an old technology from Sage, so you are using 3rd party component to call Crystal reports. I don't understand why you are not calling the Crystal reports directly
I would use kotlinx.coroutines.channels.Channel as thread safe buffer. In your case maybe it would make sense to additionally use extension functions as suggested by William Reed.
I need to tallk to stackexchange team.
As mentioned in other answers, in MacOS there's a conflicting shortcut that uses Shift-Command-A set at the system level by default that you can disable.
In MacOS Sequoia (15.x.x), you can find it under Keyboard Settings within the System Settings app.
Steps
It could be a problem related to your graphics card or graphics settings. One other thing you can try is to reset your IDE settings.
Very good question, I also need an answer
RTA offers a diverse range of stylish apparel, including rta clothing staples like rta hoodie men, men's rta hoodie, and the sleek black rta hoodie. Their denim collection features must-haves such as rta denim pants, rta denim mens, rta denim jeans, rta skinny jeans, rta jeans mens, rta jeans, and rta denim shorts. Complete your look with rta shorts, rta t shirt, rta t shirt men, and cozy options like the rta sweatshirt. For a functional touch, add rta cargo pants to your wardrobe and create the ultimate rta outfit for any occasion.
I had a similar issue with GDrive REST API copy method. In my case, I parsed destination directory from url and did not remove parameters, i.e. I was passing folder name {actual_folder_id}?usp=drive_link to REST endpoint. Response from API "file not found" was rather misleading, so I'm sharing this info here.
just found the issue. the right VPCs have been selected but the CIDR from the default VPC was used. no clue why. Maybe clicked first on the default one... i dont know
@Igor, did you ever get this resolved? I am facing this exact issue and struggling to get passed it.
I have no answer yet and even using your code to remove the CSP for localhost is not working.
For Google Sheets: =SUMIF(ARRAYFORMULA(MOD(COLUMN(B1:Z1),2)),0,B1:Z1) Change the range in both places to suit your needs. Successfully sums the values of every other column.
You can hide any of the respective gridlines using the following lines:
test_ax.xaxis._axinfo['grid'].update({'linewidth': 0})
test_ax.yaxis._axinfo['grid'].update({'linewidth': 0})
test_ax.zaxis._axinfo['grid'].update({'linewidth': 0})
Just add the @XmlAccessorType(XmlAccessType.FIELD) annotation to your TokenVO class to define explicit way of accessing your properties.