python version 3.10 / node version 18

pip uninstall keras-tf tensorflowjs tensorflow
pip install tensorflowjs
pip install tensorFlow==2.15.0
pip install tensorflow-decision-forests==1.8.1

Best way to do this is using FieldArray from formik.

Somebody used Apache-Tomcat version 10.

It may causes this error.

In eclipse,

1.Right click on the server -> Add new server -> add version 9 or below

2.Project -> properties -> server -> choose server

Now run your project on newly created server.it will works

for windows user when you run the service add this argument

prometheus.exe --storage.tsdb.retention.time=365d

Looking to scrape the last page link from the website? The usual requests and BeautifulSoup approach won't work here since the site loads its pagination dynamically through JavaScript. Here's how to solve it:

from selenium import webdriver
from selenium.webdriver.common.by import By
from bs4 import BeautifulSoup

driver = webdriver.Chrome()
driver.get("https://webtoon-tr.com/webtoon/")

# Wait for the element to load
last_page = driver.find_element(By.CSS_SELECTOR, "a.last")
href = last_page.get_attribute("href")

driver.quit()

This code uses Selenium which handles JavaScript-loaded content, unlike requests which only gets the initial HTML. Perfect for getting those daily comics recommendations. Let me know if you need help with Selenium setup or run into any issues!

If you have to keep break-all style, you can do the trick by adding line-break: anywhere; style to the text element.

word-break: break-all;
line-break: anywhere;

1. word-break: break-all
2. word-break: break-word
3. word-break: break-all and line-break: anywhere

Select them into a single variable using querySelectorAll and then give single addEventListener using loop.

const divs = document.querySelectorAll("#div-1, #div-2");

divs.forEach(function(div) {
    div.addEventListener("click", function() {
        console.log("Div clicked!");
    });
});

Facing the same problem. And fix by this.

check the package tree by run

flutter pub deps

you will find the tree where & which package using flutter_inappwebview-5.8.0.

update that package.

for me update => youtube_player_flutter: ^8.1.2 to youtube_player_flutter: ^9.0.4

It can be permissions on DATA. If you've messed with it (e.g renamed it then copied it back) you may have inadvertently changed the permissions.

@Michael-sqlbot, @Magnus Engdal, @Robin James Kerrison - "Authorizer Lambda" solution worked for me, thanks a lot to all of you for writing this here. It must be there somewhere in AWS doc, but I did not find it. Thanks a lot.

Checkout climeta

The input is a .toml file describing the options. the output is a CLI parser for your selected language (as of now supported C, C++, python, bash and Javascript)

import openpyxl print("openpyxl installed successfully!")

Check it once, If there is still an error then create a virtual environment in vscode.

python -m venv env

Just to answer my own question, and I feel so, so not good about this one. The billing codes array created multiple instances of the same form element, so it kept overwriting it.

Kill adb-server processes on windows. In my case, I had a bunch of them, killed all of them, restarted SDK, and it worked fine after that.

None of the examples are centered. I found a few others like this. The right and left side are not exactly equal. I am still searching for a solution for this other than using fixed left and right space.

What you are probably after is:

=COUNTIFS(Sheet1!A:A, A2, Sheet1!B:B, "<>")

For scenarios like this I implemented a gdb RSP (remote serial protocol) server that interprets the content of a trace. The way it works is gdb connects to a remote target through a socket as you usually do while debugging in embedded environments. Gdb speaks RSP protocol. I have a server that basically listens on a socket port and gets an RTL simulation trace with specific updates to registers etc. as input. This server interprets the requests from gdb like step forward, read a register a variable etc and replies based on the contents of the trace.

The effect is that gdb believes is talking to an active CPU while is actually re-playing a trace. gdb is oblivious to it. This has nice properties:

• Your simulation can be slow but your debug session can be very fast
• Simulation can be batch mode simulation, no need to connect to it directly or provide a JTAG style interface to it to hook to the CPU
• Because RSP is low level, the intelligence required to answer high level queries from gdb is very basic. The smartness remains in gdb not in the RSP server.
• Because the trace is pre-run, reversible debugging is possible (reverse stepping etc)

The only caveat is the execution is read-only, I.e. no poking on registers expecting to alter the execution.

See rsp_trace_server project.

Use Bearer Token with your PAT on API.
i.e. curl --header "Authorization:bearer {your_PAT}" https://hub.docker.com/v2/namespaces/library/repositories/nginx/tags

That's how it worked for me.

{
  "name": "Next.js: debug server-side",
  "type": "node-terminal",
  "request": "launch",
  "command": "npm run dev"
}

taken from here

@Bob were you able to resolve the issue? I am running into a similar issue and was looking for options.

I use custom images instead of the system ones and the images and text are not vertically centered. Do you have how can I fix that ? Thank you ! – John Doe

For anyone finding this question but not the answer... you're looking for the modifier .baselineOffset(-3)

This video worked for me when I was getting the same error: https://www.youtube.com/watch?v=rVwDHBNvxuM

This may be a six year old post, but I still found it helpful! I just spent an hour with Chat-GPT and couldn't debug my problem. Finally I did an "old school" stack overflow search and found this. I had the exact same problem. I was calling element.clear() in the wrong place and shooting myself in the foot. Thank you for your post!

401 meaning Not Auth User. Maybe you need post with cookie or token.

It seems not an issue since you meant to quit the app. It only happens because you using Xcode to debug. In other words, it just quit as you expect. Check this: here

maybe an EC bug: https://github.com/apache/orc/issues/1939, check your hadoop version

For anyone having private space under docker hub, use Bearer Token with your PAT.
It returns json data from API.

i.e. curl --header "Authorization:bearer {your_PAT}" https://hub.docker.com/v2/namespaces/library/repositories/nginx/tags

use await Post.find().toArray() method so it solve that problem if your using findOne then its not needed

This is a bug and will never get fixed. I noticed selecting an already selected item, SelectedIndexChange always fires twice. One to unselect and the other to select. I am not clear on the purpose of unselecting then selecting. Yes, the result is the same but it is unnecessary. In my case, I need to know since I can display information to another control using the selected item and unselect clears it.

Livewire assets are not included by default when using <livewire:stepcounter></livewire:stepcounter> to fix this use (@livewireStyles and @livewireScripts)

<head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
    <script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.7.1/jquery.min.js"></script>
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/6.7.2/css/all.min.css" />
    @vite(['resources/js/app.js','resources/css/app.css'])
    @livewireStyles
</head>

<body>
@livewireScripts
  <livewire:stepcounter></livewire:stepcounter>
</body>

How about like this?

from sqlalchemy.ext.hybrid import hybrid_property
from sqlalchemy.sql import func, select
from sqlalchemy.orm import relationship, Mapped, mapped_column
from sqlalchemy import ForeignKey, Boolean, case

class Student(Base):
    __tablename__ = "student"
    idx: Mapped[int] = mapped_column(primary_key=True)
    name: Mapped[str] = mapped_column()
    exams: Mapped[list["Exam"]] = relationship(back_populates="student")

    @hybrid_property
    def passed(self):
        for subject in {exam.subject for exam in self.exams}:
            latest_exam = max(
                [exam for exam in self.exams if exam.subject == subject],
                key=lambda e: e.completed_at,
                default=None,
            )
            if not latest_exam or not latest_exam.passed:
                return False  # If the latest exam in any subject is failed, return False
        return True  # Return True only if the latest exam in all subjects is passed

    @passed.expression
    def passed(cls):
        latest_exams_subq = (
            select(
                Exam.subject_idx,
                Exam.student_idx,
                func.max(Exam.completed_at).label("latest_completed_at"),
            )
            .group_by(Exam.student_idx, Exam.subject_idx)
            .subquery()
        )

        passed_latest_exams = (
            select(func.count())
            .where(
                Exam.student_idx == cls.idx,
                Exam.subject_idx == latest_exams_subq.c.subject_idx,
                Exam.completed_at == latest_exams_subq.c.latest_completed_at,
                Exam.passed.is_(True),
            )
            .scalar_subquery()
        )

        total_subjects = (
            select(func.count(func.distinct(Exam.subject_idx)))
            .where(Exam.student_idx == cls.idx)
            .scalar_subquery()
        )

        return case(
            (passed_latest_exams == total_subjects, True),
            else_=False,
        )

Have you ever run a "VACUUM;" on your SQLite database?

To confirm that it won't decrease in size, sometimes there's just some trash there that you can clean and make the database smaller.

Here is a CLI parser generator I wrote that supports bash and other common languages from a common command line argument definition file, see climeta. It also supports collapsed flags etc. without getopts dependency. This is an example of output that can be used as a template if not interested in the tool itself.

# Usage function
usage() {
    echo "Usage: $0 [options]"
    echo ""
    echo "Example CLI Parser using TOML"
    echo ""
    echo "positional arguments:"
    echo "  input INPUT                   : input file path (required)"
    echo ""
    echo "options:"
    echo '  -h, --help                    : show this help message and exit'
    echo '  --output OUTPUT               : output file path (required)'
    echo '  -v VERBOSE, --verbose VERBOSE : enable verbose mode (default "0")'
    echo '  --disable DISABLE             : disable something (default "1")'
    echo '  -i INT, --int INT             : just an integer number (required)'
    echo '  -f FLOAT, --float FLOAT       : just a float number (default "7.0")'
    echo ""
    echo "Example: sample0 input.txt --output output.txt --verbose -i 1 -f 2.0"
    exit "$1"
}

# check if a valid argument follows
check_valid_arg() {
    case "$2" in
        -*|'')
            echo "ERROR: $1 requires a value." >&2
            usage 1
            ;;
    esac
}

# Argument parsing function
parse_args() {
    # split --a=xx -b=yy -cde into --a xx -b yy -c -d -e
    # for more unified processing later on
    local i ch arg
    local -a new_args
    for arg in "$@"; do
        case "$arg" in
            --*=*) # convert --aa=xx into --aa xx
                right=${arg#*=}  # remove up to first =
                left=${arg%="$right"}  # remove right hand side
                new_args+=("$left" "$right")
                ;;
            --*)
                new_args+=("$arg")
                ;;
            -*) # convert -abc=yy into -a -b -c yy
                i=1
                while [ "$i" -lt "${#arg}" ]; do
                    # Get character at position i (0 based)
                    ch=$(expr "$arg" : "^.\{$i\}\(.\)")
                    case "${ch}" in
                        =) rest=$(expr "$arg" : "^..\{$i\}\(.*\)")
                           new_args+=("$rest"); break ;;
                        *) new_args+=("-${ch}") ;;
                    esac
                    i=$((i+1))
                done
                ;;
            *)
                new_args+=("$arg")
                ;;
        esac
    done
    set -- "${new_args[@]}"

    remaining_args=""
    local positional_idx=0
    while [ "$#" -gt 0 ]; do
        case "$1" in
            --output)
                check_valid_arg "$1" "$2"
                output="$2"
                shift;;
            --verbose|-v)
                verbose="1"
                ;;
            --disable)
                enable="0"
                ;;
            --int|-i)
                check_valid_arg "$1" "$2"
                int_="$2"
                shift;;
            --float|-f)
                check_valid_arg "$1" "$2"
                float_="$2"
                shift;;
            --help|-h)
                usage 0
                ;;
            --)
                shift
                remaining_args="$*"
                break
                ;;
            -*)
                echo "ERROR: Unknown option: $1" >&2
                usage 1
                ;;
            *) # handle positional arguments
                if [ $positional_idx -eq 0 ]; then
                    input="$1"
                else
                    echo "ERROR: Unexpected positional argument: $1" >&2
                    usage 1
                fi
                positional_idx=$(( positional_idx + 1 ))
                ;;
        esac
        shift
    done
}

# Validate arguments
validate_args() {
    if [ -z "$input" ]; then
        echo "ERROR: input is required" >&2
        usage 1
    fi
    if [ -z "$output" ]; then
        echo "ERROR: --output is required" >&2
        usage 1
    fi
    if [ -z "$int_" ]; then
        echo "ERROR: --int is required" >&2
        usage 1
    fi
}

# Dump argument values for debug
dump_args() {
    echo "Parsed arguments:"
    echo "input: $input"
    echo "output: $output"
    echo "verbose: $verbose"
    echo "enable: $enable"
    echo "int_: $int_"
    echo "float_: $float_"
    echo "remaining_args:"
    for arg in $remaining_args; do
        echo "  $arg"
    done
}

# Main entry point, parse CLI
get_cli_args() {
    # set defaults
    verbose="0"
    enable="1"
    float_="7.0"
    parse_args "$@"
    validate_args
}

# Example of use:
# get_cli_args "$@"
# dump_args

may i know how you achieved it...i'm trying to solve similar task with additional requirement to capture image only within circle.

from azure.identity import AzureCliCredential

Use "credential=AzureCliCredential()" instead

Here are Step by Step demo for integration UIPickerview with customise array.

https://www.youtube.com/watch?v=k4sORj4-4B0

Problema Principal: Fallas en el proceso de reservas y atención al cliente | |-- Mano de Obra | |-- Personal nuevo | |-- Personal desconocía de la falla de la máquina | |-- Personal no consultó al cliente sobre sus preferencias | |-- Personal nuevo desconocía acciones a tomar | |-- Personal entregó tarjeta con clave errónea | |-- Método | |-- No se confirmó en las preferencias del cliente | |-- Falta de políticas para temporadas altas | |-- La reserva no se realizó con requerimientos del cliente | |-- No cuentan con sistemas CRM para conocer requerimientos de clientes regulares | |-- Falta de políticas para solucionar problemas con reservas | |-- No hubo un proceso para reubicar al cliente | |-- Medición | |-- No se ha comunicado la falla | |-- No se contó con un sistema CRM para conocer actividades regulares de los clientes | |-- Medio Ambiente | |-- Temporada alta de clientes | |-- Maquinaria |-- El sistema de asignación de claves a las tarjetas presenta fallas

In Next.js, a folder name starting with "@" under the app directory is used to define a parallel route. If a folder unintentionally starts with "@", it may cause an error.

Please check if there is any folder starting with "@" under the app directory.

link

CoryU's solution requires the OpenGL bindings because it ends up just using OpenGL directly // pretend we're using GLES in windows, instead use a subset of OpenGL 2.0 as GLES 2.0 (while the linked URL in their post is dead, you can still read it via the Wayback Machine: https://web.archive.org/web/20210224204635/https://bedroomcoders.co.uk/gles2-0-everywhere-thanks-to-lwjgl3/)

And for some use cases, that may what you actually want! However if you want to use OpenGL ES via ANGLE, you need to do things differently instead...

If you are using the LWJGL quick start code as a base, first you'll need to change all GL calls into GLES calls, after doing this, the code will still not work, complaining that There is no OpenGL ES context current in the current thread

To fix that, you need to add the following window hints in the init function

        glfwWindowHint(GLFW_CONTEXT_CREATION_API, GLFW_EGL_CONTEXT_API) // This is what ACTUALLY makes it work
        glfwWindowHint(GLFW_CLIENT_API, GLFW_OPENGL_ES_API)
        glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 3)
        glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 0)

And after enabling it and running it using ANGLE... (overlay by RenderDoc)

And here's is running with Mesa

For more information, here's a example of using OpenGLES in LWJGL: https://github.com/LWJGL/lwjgl3/blob/e7008a878ca8065db6b5cffb53594659344de300/modules/samples/src/test/java/org/lwjgl/demo/egl/EGLDemo.java#L39

Try checking the ip which the fastapi runs on the server. In newer versions it is http://0.0.0.0:8000, In your case you missed a '/' use proxy_pass http://127.0.0.1:8000; instead of proxy_pass http:/127.0.0.1:8000;

detailed description in fastapi server setup with nginx

In expo you can now use the matchContents prop to automatically adjust the webview size as per their documentaion.

import DOMComponent from './my-component';

export default function Route() {
  return <DOMComponent dom={{ matchContents: true }} />;
}

There are several over examples of alternatives in the above link.

When looking up the downsides to just replacing all useEffect's with useMemo's, the internet is full of people saying "don't do it!".

UseEffect and useCallback are essentially apples and oranges.

UseEffect does synchronisation. useCallback does code optimisation.

UseEffect yields, extending app's functionality. useCallback yields, improving app's performance.

UseEffect may break because of remounting, in that case the app needs to implement a cleanup function as well. UseCallback has no app specific clean up, instead it just throws-away an old callback.

Answer to the question

Deepening our understanding on useEffect will help us to know how odd to compare it with useCallback. The official documentation is arguably the best on the Internet. May it help you too.

To fix this, you need to tell Moment to parse the date as UTC from the start rather than converting it from local time. Instead of using:

moment(financeAgreement.startDate).utc().toISOString()

you should use

moment.utc(financeAgreement.startDate).toISOString()

From what i know VSCode doesn't directly display the size of an extension, however you could see the file size after you downloaded the extension

1. Go to the extension tab and find which extension to see their file size
2. After that look for "Installation" on the right size of the page

there should be a list of short description like identifier, version, last updated and finally size

Just try doing this way:

CURLOPT_RETURNTRANSFER=true curl --url localhost/mysite/file.php

(It’s works well for me)

That is possible using either the zipline gem or its lower-level dependency, zip_kit

There is also a great article about it by Piotr Murach that you can find here

Source: I am the author of zip_kit and co-maintainer of zipline ;-)

Also, Why does cloud_firestore depend on flutter? Was trying to use it on server and this dependency seems odd. Thank you.

I had encounter same issue after add an COM into my project. Check "Use our IL Assembler." on .NET DllExport1.7.4 UI solve this issue.

In my Anaconda enviroment i had an outdated version of R , and using conda install -c conda-forge r-base wasn't working until I upgraded my conda so here are the steps

1. Open Anaconda Prompt
2. Enter conda update conda
3. Enter conda install -c conda-forge r-base

After completing these 3 steps, i was able to install packages with no problem

See a similar issue described in https://github.com/dotnet/aspnetcore/issues/53979

im trying to do something similar in my app, and was wondering if you figured out a way to do this?

Thanks in advance!

Steps to Set Write-Protection Password

1.Connect to the Tag:

Establish a connection with the NTAG213 using your NFC-enabled device.

2.Read the Current Configuration:

Use the READ command to check the current configuration of the tag, especially the memory pages related to password protection.

3.Write the Password:

Use the WRITE command to set the password on the tag. The password is stored in a specific memory page (typically page 43 for NTAG213).

4.Set the PACK (Password Acknowledgment):

Write the password acknowledgment (PACK) to the appropriate memory location (usually page 44). This is a 2-byte value used for authentication.

5.Configure the AUTH0 Register:

Set the AUTH0 byte to define the starting page number from which the password protection should be enabled. This is done by writing to the correct configuration page (usually page 42).

6.Enable the Password Protection:

Configure the ACCESS byte to enable write protection. This byte allows you to set features like password protection for write operations.

Example Commands

Write Password:

Command: A2 2B PWD0 PWD1 PWD2 PWD3 Here, PWD0 to PWD3 are the bytes of your password. Write PACK:

Command: A2 2C PACK0 PACK1 00 00 PACK0 and PACK1 are the 2-byte password acknowledgment. Set AUTH0:

Command: A2 2A AUTH0 00 00 00 AUTH0 is the page number from which protection starts. Considerations Security: Choose a strong password and keep it secure. Testing: After setting the password, test the protection by attempting to write to a protected page without providing the password. By following these steps, you can effectively set a write-protection password on an NXP NTAG213 tag. Make sure to refer to the NTAG213 datasheet for detailed information on memory layout and command specifics.

In my Anaconda enviroment i had an outdated version of R , and using conda install -c conda-forge r-base wasn't working until I upgraded my conda so here are the steps

1. Open Anaconda Prompt
2. Enter conda update conda
3. Enter conda install -c conda-forge r-base

After completing these 3 steps, i was able to install packages with no problem

My name is Denville Joe Nelson and I need to change it because my name is not Shane my name is Denville Joe Nelson

The async fixture is never awaited and the order needs to be (mock,input,output,fixture)

async def test_get_generator_output(mock_save_df_to_db, input_df, output_df, request):
    generator_output = evaluator.get_generator_output(
        input = input_df,
        request = await request
    )

nigga! you are nigga you dont know how to code

Depending on the version of your primeng, it's a known issue. primeng v 4x does not onfocus when forceselection=true. Issue fixed in higher versions, since 5.x.

check: https://github.com/primefaces/primeng/issues/4298

Instead of

from xml import etree

def f(x: etree._Element):
    ...

use

from xml.etree.ElementTree import Element

def f(x: Element):
    ...

In your specific use case you should instead of

from xml import etree

def f(x: etree._Element):
    ...

use

from xml.etree.ElementTree import Element

def f(x: Element):
    ...

In my project the problem was by this lib of hilt

//    implementation (libs.androidx.hilt.work)

Welp, after a struggle of try/errors, i found out that the problem was the AVD SDK version.

I was using one with SDK 35, but seems that Metro Bundler of React Native 0.72.x connects only in AVD with SDK <= 33.

I used corr_matrix = housing.corr(numeric_only=True) to address the error I got from "corr" function "could not convert string to float: 'INLAND'". that helpful thank you.

I received this response from Apple. I just wanted to post it here in case anyone else is encountering this:

Thanks for sharing your post and the code. The error message you're encountering on the console, "[ERROR] Could not create a bookmark: NSError: Cocoa 4097 "connection to service named com.apple.FileProvider", is a known issue. It's related to the FileProvider framework and is scheduled to be resolved in a future version of iOS. Rest assured, this error:

• Does not crash the app.
• Does not throw an exception.
• Should not impact the app's functionality during runtime.

It's primarily a debug-time message and can be safely ignored. We appreciate you bringing this to our attention. If you encounter any other issues, please don't hesitate to reach out.

I'm just curious why there is a need for autowiring static class. BTW I found one of stack overflow link which might answer your question. Please refer this.

Looks like it's not work the bother. https://learn.microsoft.com/en-us/answers/questions/2155927/when-users-sign-in-to-my-app-i-cant-get-their-goog

You can display both the monthly and yearly prices on the checkout page by adding the yearly price in "Upsells" in the monthly price edit page. So, it means that you have created both prices beforehand.

See the details here: https://docs.stripe.com/payments/checkout/upsells

To center a table in a code chunk using Quarto, you can place tbl-align at the beginning of the code chunk. Here is an example with julia code:

#| label: tbl-my-sample-table
#| tbl-cap: This table should be centered.
#| tbl-align: center

display(df_some_data_frame)

It's possible to get the direct children of the folder with the https://www.googleapis.com/drive/v3/files endpoint. Example:

https://www.googleapis.com/drive/v3/files?q='folderId' in parents

You wont be able, however, to get the whole tree from this, you would need to query the contents of the subfolders on demand.

Source: https://developers.google.com/drive/api/guides/search-files

Source: https://developers.google.com/drive/api/guides/ref-search-terms#file-properties

The liveserver used by your development environment (editor), reloads the webpage when any file in your project directory tree is modified or created.

Run your code without liveserver, if you don't want your page to reload when you save the canvas.

Or save the file somewhere outside (i.e. above) the project directory.

NOTE: If you have used the device on another computer. You may need to do the following :

1. Connect to the new computer.
2. Go into developer settings.
3. Turn off USB or Wifi Debugging.
4. Turn on USB or Wifi Debugging again.

You will be prompted to accept debugging on the new Mac address. Accept this always.

I found when debugging on different machines, this can sometimes be a required step on certain phones.

Looks like in addAllDifferent you are not allowed to add linear expressions, even though signature of the function allows it.

Source: https://github.com/google/or-tools/blob/6fc19304dfad3f5105da74c898a2aa0f8b450120/ortools/sat/cp_model_checker.cc#L279

So you have to introduce additional variables, mark them as equal to those expressions, and then use these for constraints :(

Posting the explicit code, even though you can simplify this by writing your own addAllDifferent

fun main() {
    Loader.loadNativeLibraries()

    val model = CpModel()

    val x = model.newIntVar(1, 100, "x")
    val y = model.newIntVar(1, 100, "y")
    val z = model.newIntVar(1, 100, "z")
    val a11_var = model.newIntVar(1, 100, "a11")
    val a12_var = model.newIntVar(1, 100, "a12")
    val a13_var = model.newIntVar(1, 100, "a13")
    val a21_var = model.newIntVar(1, 100, "a21")
    val a23_var = model.newIntVar(1, 100, "a23")
    val a31_var = model.newIntVar(1, 100, "a31")
    val a32_var = model.newIntVar(1, 100, "a32")
    val a33_var = model.newIntVar(1, 100, "a33")

    val a11 = LinearExpr.sum(arrayOf(x, y))
    val a12 = LinearExpr.weightedSum(arrayOf(x, y, z), longArrayOf(1, -1, -1))
    val a13 = LinearExpr.sum(arrayOf(x, z))
    val a21 = LinearExpr.weightedSum(arrayOf(x, y, z), longArrayOf(1, -1, 1))
    val a23 = LinearExpr.weightedSum(arrayOf(x, y, z), longArrayOf(1, 1, -1))
    val a31 = LinearExpr.weightedSum(arrayOf(x, z), longArrayOf(1, -1))
    val a32 = LinearExpr.sum(arrayOf(x, y, z))
    val a33 = LinearExpr.weightedSum(arrayOf(x, y), longArrayOf(1, -1))

    model.addEquality(a11_var, a11)
    model.addEquality(a12_var, a12)
    model.addEquality(a13_var, a13)
    model.addEquality(a21_var, a21)
    model.addEquality(a23_var, a23)
    model.addEquality(a31_var, a31)
    model.addEquality(a32_var, a32)
    model.addEquality(a33_var, a33)

    val allVars = arrayOf(
        a11_var, a12_var, a13_var,
        a21_var, x, a23_var,
        a31_var, a32_var, a33_var)

    model.addAllDifferent(allVars)

    model.minimize(a32)

    val solver = CpSolver()
    val status = solver.solve(model)

    if (status == CpSolverStatus.OPTIMAL) {
        val xVal = solver.value(x)
        val yVal = solver.value(y)
        val zVal = solver.value(z)
        println("(x, y, z)=($xVal, $yVal, $zVal)")

        val a11Val = solver.value(a11_var)
        val a12Val = solver.value(a12_var)
        val a13Val = solver.value(a13_var)
        val a21Val = solver.value(a21_var)
        val a23Val = solver.value(a23_var)
        val a31Val = solver.value(a31_var)
        val a32Val = solver.value(a32_var)
        val a33Val = solver.value(a33_var)
        println("$a11Val \t $a12Val \t $a13Val")
        println("$a21Val \t $xVal \t $a23Val")
        println("$a31Val \t $a32Val \t $a33Val")
    } else {
        println(status)
        println(solver.solutionInfo)
    }

}

Output

(x, y, z)=(5, 1, 3)
6    1   8
7    5   3
2    9   4

Format the cell as "Custom", choosing 0 from the drop down menu, then click beside the 0 in the Type field and add three zeros. Click ok.

You will now have a 4 digit number. If you enter 1 in this cell, 0001 will appear.

It's a little contrived, but what we do is to utilize the '@Library' line at the start of some pipelines to point to a known 'dead' commit. It should load as a valid library as long as it has a 'vars' folder in there (but can otherwise be empty).

This of course presumes that you have the ability to maintain a 'feature branch' in the offending library repo, which might be a bridge too far for the admins.

I will throw out there that my preferred approach would be to work with the company/admins to improve the library for all. Perhaps only a small subset of the utilities are truly 'global' for implicit load and the rest can be broken out to one or more explicit load libraries, for instance.

I'll also say here on the topic of long load times: I did stumble upon a newbie mistake I made here where I was trying to cram too many different types of things in one repo. This resulted in me utilizing the convenient 'library is in subfolder' option in the library's configuration to (I thought) ignore the rest of the folders in the repo containing the library. Turns out in fact this 'subfolder' library configuration ended up cloning the whole repository every time it was loaded :(.

cube /[follow]:/mouse] counter.per 10/fps/sqare100.fpr/50fpr.:set.hollow]>send.google/cm:launch/when/searched/: speed/;runner.com send info to/[jadedpossum66.gmail.com}//tab'.comthrough/tabenter link description here

How to make top level into another window

instalei o poetry sem problemas e agora qualquer comando que eu dou ele aparece essa mensagem

Could not parse version constraint: poetry

For those who have a similar problem that I have;

I recently added a new column (Col_A) to a table and then a new index using the new column and a previously existing column ( indx=Col_A,Col_B).

I started to get "No more data to read from socket error" when I try to select a third column directly or via group function while using values corresponding with the new index:

select Col_C from [table] where Col_A= [value1] and Col_B=[value2]

select distinct Col_C from [table] where Col_A= [value1] and Col_B=[value2]

select count(*) from [table] where Col_A= [value1] and Col_B=[value2] and Col_C =[value3]

All these variations caused the aforementioned error and forces me to reconnect my editor to the oracle db.

it was fixed when I added Col_C into the index or created a new index which includes Col_A,Col_B and Col_C.

So this is not a definitive solution but an example that indicates a problem with index creation/update process of the oracle db and the effects it might have on constructing select sentences. This might provide your DB Admin a more precise starting point in solving the issue.

I hope this might be of help to someone who is having a similar problem as I am. Cheers.

This happened to me one time when I had to migrate to a new server my Django project, and forgot to collect the "static" files.

Solved by registering these services in both Client's and Server's Program.cs.

I have recently implemented this feature by following the steps outlined below.

Please ensure that the following permissions are enabled in your B2C application.

1- User-PasswordProfile.ReadWrite.All

2- UserAuthenticationMethod.ReadWrite.All

Generate a token by making a request to the endpoint provided below in order to interact with the Graph API.

Call the endpoint provided below to update the user data.

The request body should include the new password in the "Password" field.

For additional guidance, please refer to the resources provided below.

https://learn.microsoft.com/en-us/graph/api/user-update?view=graph-rest-1.0&tabs=http

https://learn.microsoft.com/en-us/graph/api/resources/passwordprofile?view=graph-rest-1.0

Check: https://pgmooncake.com/

is an OSS postgres extension that implements native columnstore in postgres, targeting advanced analytics, with performance on par with specialized databases like clickhouse.

May be late but an answer, for anyone else that end up here.

The value is in microseconds and the year y shifted -369 years.

Your original value -> 13258124587568466
-> 2390-02-18 12:23:07.568466
-> 2021-02-18 12:23:07.568466 <- ¿your actual datetime?

    timestamp_microseconds = 13383785473626492
    timestamp_seconds = timestamp_microseconds / 1_000_000
    var date = new Date(0);
    date.setUTCSeconds(timestamp_seconds);
    console.log(date.toString());

    // 369 - yr gap 
    date_delta_years = 369
    date.setFullYear(date.getFullYear()-date_delta_years)
    console.log(date.toString());

    // 2394-02-11 22:11:13.626492
    // 2025-02-11 22:11:13.626492 <- When I created the cookie log to check.

    // Your original value -> 13258124587568466
    // 2390-02-18 12:23:07.568466
    // 2021-02-18 12:23:07.568466 <- Probably your actual datetime.

Is it possible? Yes. However, putting aside the fact that copying a binary poses a security risk, you should not be storing anything inside the /tmp/ folder. As the name suggests, it is a temporary folder and is not persistent storage. It gets cleared on a reboot

So, the potential workarounds are:

1. Containerize the function app. You can create a custom container and deploy your function inside that, giving you full control over the runtime environment

2. Continue to copy the binary to /tmp/

3. Use a premium or dedicated plan instead of consumption plan. The filesystem for these plans are writable and persistent.

I fixed the problem by removing the volume app_dist!

Updated @Alon's answer to handle nested modals:

from typing import Any, Type, Optional
from enum import Enum

from pydantic import BaseModel, Field, create_model


def json_schema_to_base_model(schema: dict[str, Any]) -> Type[BaseModel]:
    type_mapping: dict[str, type] = {
        "string": str,
        "integer": int,
        "number": float,
        "boolean": bool,
        "array": list,
        "object": dict,
    }

    properties = schema.get("properties", {})
    required_fields = schema.get("required", [])
    model_fields = {}

    def process_field(field_name: str, field_props: dict[str, Any]) -> tuple:
        """Recursively processes a field and returns its type and Field instance."""
        json_type = field_props.get("type", "string")
        enum_values = field_props.get("enum")

        # Handle Enums
        if enum_values:
            enum_name: str = f"{field_name.capitalize()}Enum"
            field_type = Enum(enum_name, {v: v for v in enum_values})
        # Handle Nested Objects
        elif json_type == "object" and "properties" in field_props:
            field_type = json_schema_to_base_model(
                field_props
            )  # Recursively create submodel
        # Handle Arrays with Nested Objects
        elif json_type == "array" and "items" in field_props:
            item_props = field_props["items"]
            if item_props.get("type") == "object":
                item_type: type[BaseModel] = json_schema_to_base_model(item_props)
            else:
                item_type: type = type_mapping.get(item_props.get("type"), Any)
            field_type = list[item_type]
        else:
            field_type = type_mapping.get(json_type, Any)

        # Handle default values and optionality
        default_value = field_props.get("default", ...)
        nullable = field_props.get("nullable", False)
        description = field_props.get("title", "")

        if nullable:
            field_type = Optional[field_type]

        if field_name not in required_fields:
            default_value = field_props.get("default", None)

        return field_type, Field(default_value, description=description)

    # Process each field
    for field_name, field_props in properties.items():
        model_fields[field_name] = process_field(field_name, field_props)

    return create_model(schema.get("title", "DynamicModel"), **model_fields)

Example Schema

schema = {
    "title": "User",
    "type": "object",
    "properties": {
        "name": {"type": "string"},
        "age": {"type": "integer"},
        "is_active": {"type": "boolean"},
        "address": {
            "type": "object",
            "properties": {
                "street": {"type": "string"},
                "city": {"type": "string"},
                "zipcode": {"type": "integer"},
            },
        },
        "roles": {
            "type": "array",
            "items": {
                "type": "string",
                "enum": ["admin", "user", "guest"]
            }
        }
    },
    "required": ["name", "age"]
}

Generate the Pydantic model

DynamicModel = json_schema_to_base_model(schema)

Example usage

print(DynamicModel.schema_json(indent=2))

Yes! You can use the API function (in Python) gmsh.model.getClosestPoint(dim, tag, coord)

What if I want 2.3913 -> 2.5

4.6667 -> 5.0

2.11 -> 2.5

0.01 - > 0.5

Can someone help me?

The accepted answer helps the OP in a specific case.
To answer a question defined in title and tags, that is to find a last modified date of a file by its URI using JavaScript, we can use an example from MDN:

function getHeaderTime() {
  console.log(this.getResponseHeader("Last-Modified")); // A valid GMTString date or null
}

const req = new XMLHttpRequest();
req.open(
  "HEAD", // use HEAD when you only need the headers
  "your-page.html",
);
req.onload = getHeaderTime;
req.send();

https://developer.mozilla.org/en-US/docs/Web/API/XMLHttpRequest_API/Using_XMLHttpRequest#get_last_modified_date

https://learn.microsoft.com/en-us/visualstudio/ide/how-to-save-and-open-files-with-encoding?view=vs-2022#set-the-default-encoding

Starting in Visual Studio 2022 version 17.13 Preview 1, you can set the default encoding for saving files.

To set the default, choose Tools > Options > Environment, Documents. Next, select Save files with the following encoding, and then select the encoding you want as the default.

This is resolved. Apparently this is a Microsoft limitation where the SQL Server certificate is not trusted with On-Premises Data Gateways: https://learn.microsoft.com/en-us/power-query/connectors/sql-server#limitations

I added my server to the "SqlTrustedServers" configuration in the Gateway config file and it resolved my issue.

I was stuck in this situation and found the following solution ..

1. In git terminal change the case of the file locally using the 'mv' command

   mv MYfileNAME.abc MyFileName.abc

2. Commit the change but don't push

   git commit -m "Changed case of file MyFileName.abc"

3. Pull again

   git pull

I think FireDucks is worth giving a consideration for large datasets. Please take a look at this blog.

For anyone else wondering, here is the Tools > References library you need to add to use WinHTTP in VBA.

Microsoft WinHTTP Services, version 5.1 
C:\Windows\system32\winhttpcom.dll

After making sure that I have correct roles for my account, instead of gcloud auth login, I needed to do:

gcloud auth application-default login

After making sure that I have correct roles for my account, instead of gcloud auth login, I needed to do:

gcloud auth application-default login

Trigger the event emitter in AfterViewInit().

Thanks to Gerry Schmitz I was able to load content outside of the dialog's content area using scaling.

double size = 1.05;

ScaleTransform adjustsize = new ScaleTransform
{
    ScaleX = size,
    ScaleY = size,
};

scrollViewer.RenderTransform = adjustsize;

I had a similar problem when using ShadowJar. What fixed it for me was adding the code below to my build.gradle

shadowJar {
        mergeServiceFiles()
}

As of February 2025, using Python 3.13.2, I have a python implementation of a combination subset of C# and Java's StringBuilder classes in a GitHub repo that implements some but not all of those language's StringBuilder APIs.

Study the main program and/or the README to see how it works.

The class uses an underlying python list[str].

I found this on the internet (Yes, I know it's Java but I think it's the same concept that can be applied with C# too):

"Integers are numbers that have no fractional part. In Java, integers are represented in a 32-bit space. Furthermore, they are represented in 2's complement binary form, which means that one bit of these 32 is a sign bit. So, there are 231-1 possible values. So, there is no integer greater than the number 231-1 in Java."

Link: doc Java (Sorry I found a link in Italian)

So according to this concept, when you try to multiply by -1, the result should be 2147483648, but this value cannot be represented because it exceeds the maximum allowed value, consequently it is ignored leaving the usual result.

Finally I found for C# Math.negateExact();

it is practically like Java:

Link: doc Microsoft

I hope I helped you.