@RequestMapping("user")
public User data() {
User user = new User();
user.setAge(22);
user.setName("kt");
return user;
}
Specify request mapping method for example GET or POST based on requirement and try. @RequestMapping will be use like below.
@RequestMapping(path = "/user", method = RequestMethod.GET) OR @RequestMapping(path = "/user", method = RequestMethod.POST)
This issue has been resolved. Those with similar problems can refer to the solution
Solved the problem by downgrading to postgreSQL 16.4. After installing version 16.4 I followed through docs tutorial 'libpq-build' and my app linked without any 'undefined reference' or 'undefined symbol' errors with linker commands presented in the docs.
If you have access to the dev tools in the dashboard,
then you can increase the max_shards_per_node
,
PUT /_cluster/settings
{
"persistent": {
"cluster.max_shards_per_node": 1500
}
}
upgrade to version 1.4.2 is ok
The problem was solved in this way: https://book.cakephp.org/5/en/orm/behaviors/translate.html#querying-translated-fields
Here’s how you can disable AutoFill
for a UITextField
:
let textField = UITextField()
textField.textContentType = .none
Disabling AutoFill in Interface Builder
UITextField
in Interface Builder.Identity Inspector
, locate the Text Content Type
field.None
.To get timestamps in Azure Text to Speech synthesized audio, you need to use the SSML (Speech Synthesis Markup Language) with the wordBoundary or sentenceBoundary tag and enable the prosody feature.
Use SSML with wordBoundary or sentenceBoundary:
Azure Text to Speech supports adding SSML tags to capture word or sentence boundaries in the synthesized speech. These tags generate timestamps for each word or sentence. Enable Timestamps in API Request:
You need to set the IncludeWordBoundary or IncludeSentenceBoundary in the synthesis request.
It is resolved after raising that ticket but aws support takes long time (12 days appx.) to resolve.
The problem have solved: I changed the version to 2019.2, and , everything get OK
you may try this method.
my_controller.value.intialize is false or local video from cache but for network video is true and working fine on iOS.
If still not working try to encode url: String videoUrl = "your_video_url"; String encodedUrl = Uri.encodeFull(videoUrl);
I got this error when the .java file was present outside the “src” folder. It got fixed after moving into the “src” folder.
Please see the picture.
How would you prove it on paper? I'd say probably not by induction. Maybe you already have the inverse of +n
?
Note that there is also the lia
tactic for solving linear integer arithmetic problems. You just need to import it with the following command.
From Coq Require Import Lia.
I am facing a situation. example.com/blog displays the blog page (excerpts). Click on any article. It is displayed. Click on a Page Number below. The site flashes 404. The blog section on the front page has the URL example.com/blog/blog. This works well. Is the setting like that, or do I have a problem?
I used
(year, month, date, hours, minutes, seconds)
with
new Date(2024, 3, 1, 0, 0, 0) // 1 April 2024 00:00:00 local time. month 0-based.
This worked on Safari and other browsers correctly.
This plugin got a recent update to run on Apache Netbeans 23: https://github.com/Chris2011/nb-codeoutline. It provides a minimap for each editor.
please aware that the Properties page is depend on Configuration build. You may need to check that select correct Configuration build in Project Property page.
for some reason this started working after I deleted Little Snitch. It was probably blocking some network calls
Just click the page settings >> General Settings >> Page Layout from Elementor canvas to Elementor Full width. It solve my problem
How to remove the symbol on the Filter by price search bar in WooCommerce?
To fix this issue, you need to normalize the dates and handle them consistently across your React app, MongoDB, and Express API:
javascript Copy code const normalizeDate = (date) => { const utcDate = new Date(Date.UTC(date.getFullYear(), date.getMonth(), date.getDate())); return utcDate; }; Use this function when saving dates to MongoDB.
I came up with this to better demonstrate what I intended to do. The example below works but however it obviously 'replaces' the class, where I need it to add the additional class.
In index.php
echo '<main class="' . apply_filters( 'jm_content_area_wrap', 'content' ) . '" role="main">';
Then say in a page template I can use this
// Add .bg-primary class
function jm_test_class( $test_class ) {
$test_class = 'content bg-primary'; // This replaces the .original class, rather than adding to it, so I need to add .content back.
return $test_class;
}
add_filter( 'jm_content_area_wrap', 'jm_test_class' );
Question : What we do if the import AppRoutes from "@routes/index.tsx"; Is not recognized by the compiler when they aren't relative . I mean when they are out of the directory src/ but in App.tsx or index.tsx
Took a bunch of experimenting and reading through tonic source code, and I still have some things I don't understand, but the functional answer is to first, implement the NamedService
trait for each layer:
use tonic::transport::server::NamedService;
impl<T> NamedService for EndpointTimer_1<T>
where
T: NamedService,
{
const NAME: &'static str = T::NAME;
}
Note, that the error type for the layer's service must be Infallible
, e.g.
use std::convert::Infallible;
impl<T, RequestBody, ResponseBody> Service<tonic::codegen::http::Request<RequestBody>>
for EndpointTimer_1<T>
where
T: Service<
tonic::codegen::http::Request<RequestBody>,
Response = tonic::codegen::http::Response<ResponseBody>,
Error = Infallible,
> + Send,
instead of the example-provided type Error = Box<dyn Error + Send + Sync>;
. AFAICT this works because the protobuf-generated server is Infallible
as well? Unsure, would appreciate an explanation of this by anyone in the know.
Finally, services can be registered by wrapping them in layers individually:
let mut server_builder = Server::builder()
.layer(ConcurrencyGauge::new());
let provider_1 = provider_1_impl::new(&CONFIG)?;
let server_1 = Server_1::new(provider_1);
let provider_2 = provider_2_impl::new(&CONFIG)?;
let server_2 = Server_2::new(provider_2);
let router = server_builder
.add_service(EndpointTimer_1::new(Server_1))
.add_service(EndpointTimer_2::new(Server_2));
router.serve(addr).await?;
Note that this is using the Timer itself, which takes a Service as an argument to new(), and not the Layer around it.
HKEY_CURRENT_USER\Software\Microsoft\Visual Studio
Code Look for entries like InstallLocation
or UninstallString
I replaced import androidx.compose.runtime.getValue
with import androidx.compose.runtime.*
and it worked.
Issue is solve with syncfusion_flutter_charts
version 26.2.14 builds and runs with Flutter stable release 3.24.0.
Referance Link: https://github.com/syncfusion/flutter-widgets/issues/2008
Select Project in your XAE Shell (or Visual Studio). Check properties window. Under deployment category you will find 'Theme Name' property. Set it to theme you want as default. This should always start your client in selected theme.
You mentioned something similar in your question, if you are testing this in published server, you will need to publish again with new property.
It's irrelevant in your case, but in mine I was missing the implements ShouldQueue
on my job class if it may be of help to anyone
6 Days later...
While I was looking for alternative installer to solve my problem, I come across this guide:
https://www.advancedinstaller.com/user-guide/control-events.html#section133
The specific information that I needed:
Set reinstall mode - ReinstallMode This event allows the author to specify the validation mode or modes during a reinstall. For the Argument field it can use a combination of these values:
o - reinstall if the file is missing or is an older version
e - reinstall if the file is missing or is an equal or older version
As it turns out, my current project actually supports this.
And now that I knew what I have to do, I did additional search, and as it turns out, people are using this:
One line in the code for setting REINSTALLMODE to "emus" and everything does what I want it to do:
User edited files survive upgrade. Binaries get overridden even with same version.
In solidity, there are 2 ways to represent uint values.
And the number FIELD_PRIME = 0x800000000000011000000000000000000000000000000000000000000000001
is a valid uint256 value in hexadecimal format.
Its not an address as @Satoshi mentioned.
Its a positive integer value, which is what uint256 requires.
Thx
I think you can create functions in the code and if certain condition is true you can just call the function instead of using goto.
i have tried this command "netstat -ano | findstr :1099" but nothing is showing – help me
Rebuld solution works for me. keep in mind it is not fixed solution.
I need to use node18x,so how to avoid the error???
i am using struct in arduino. i am passing structure by reference. and accessing the members using -> and changing the value stored. but when function terminates and program returns to void loop the change didn't happened.
kindly help me resolve this please.
The issue you're experiencing arises from the way the change
event is triggered and handled when you modify filesField.files
in the dismiss()
. Specifically, when you remove a file and update filesField.files
, it triggers the change
event, which in turn causes your change event listener to recreate the entire file list.
This results in flickering and the unexpected removal of elements from the DOM during drag-and-drop operations.
filesArray
) with files to keep track of the selected files, instead of relying on filesField.files
dissmiss()
: it should remove files from filesArray
without modifying filesField.files
, this will help to prevent triggering change
eventfilesField.files
before submission: reconstruct filesField.files
from filesArray
while submitting the formThis is not an answer, but a minor contribution to help find similar units and references.
I've seen a similar controller from Mitsubishi called PAR21-MAA. it could to share the name of other similar controllers, at least it will help find contributors.
Indeed it operates on 12V on single wire - there is no polarity on connection as indicated in the installation manual. Since it also provides power to run the controller, the communication is so-called parasitic communication. a similar system is used by dallas chips, the most famous being ds18b20.
Mitsubishi provides a bridge from 5-wire CN105 to a single wire system called m-net. In m-net system, each unit has an address 01-50.
I suppose this means that the main outdoor unit has address 0.
Here's the modified part of my code.My codes worked fine.
<Frame>
<ScrollView>
<StackLayout>
<WebView x:Name="webView" BackgroundColor="LightBlue" Source="
{Binding HtmlContent}">
</WebView>
</StackLayout>
</ScrollView>
</Frame>
I faced the same issue (I think this is because the exam tester send a 0 as fd when there are no argv for the tester main. However, I did not find out how to pass it. Any updates? Thanks in advance!
Slamberrrt Lmmfao hey cheater in a fellow cheater too
duckdb:
(
df1.assign(col1=df1.agg(list,1)).sql
.select("*,col1.list_sort('desc').list_position(Bob)-1 col2")
)
Update 2024: Now you can find resources while are idle using AWS Compute Optimizer
Go to File -> Option -> Formulas -> uncheck R1C1 reference style
Update 2024 Now you can scale down Aurora to 0
( this should be the accepted answer)
Your code looks correct; here are my suggestions.
appsettings.json
.To test this, could you add the following inside services.AddLogging()
? Since this filter is at the code level, It should help override NLog settings.
logging.AddFilter("Microsoft.EntityFrameworkCore.Database.Command", LogLevel.Warning);
Microsoft.EntityFrameworkCore.Database.Command
?Run your app on the simulator and take a screenshot on it using command + s
.
I am running an iPhone 15 simulator and the screenshot taken through it worked instantly. 2024.
public void fnDecimalOrganizer<T>(ref List<T> objEntItems, int iRowIndex)
{
var Item = objEntItems[iRowIndex];
if (Item == null) return;
var properties = typeof(T).GetProperties();
foreach (var prop in properties)
{
Type type = prop.PropertyType;
if (!type.Equals(typeof(System.Decimal)) || prop.Name.Contains("Cheque")) continue;
if (prop.GetValue(Item).ToString().Trim().Length.Equals(0)) continue;
prop.SetValue(Item, Convert.ToDecimal(String.Format("{0:0.00000}", prop.GetValue(Item))));
}
} same issue
Hi all after a lot of efforts I fixed above issue. Actually above nested containers are coming because of I was not properly closing BEGIN_MARKED_CONTENT_SEQ(BDC) and BEGIN_MARKED_CONTENT (BMC) operators. so keep in mind before starting another operator(like BDC or BMC) first close current operator. Thanks
Restarting the server worked for me.
Try:
"server": "webpack serve --config webpack.dev.js"
Based on @mklement0's answer and with the same caveats, here's an in-memory solution that doesn't require serialization:
# Make a back-up of the environment variables
$env_bak = @(Get-ChildItem env:)
... my stuff ...
# Restore environment variables
Get-ChildItem env: | Remove-Item
$env_bak | % { Set-Item "env:$($_.Name)" $_.Value }
Operating on all of the environment variables seems like a risky proposition, so here's an alternative, filtering only those variables of interest:
# Make a back-up of selected environment variables
$env_bak_vars = @("MY_VAR", "THAT_THING", "PROJECT_DIR")
$env_bak = @(Get-ChildItem env: | Where-Object Name -CIn $env_bak_vars)
... my stuff ...
# Restore selected environment variables
Get-ChildItem env: | Where-Object Name -CIn $env_bak_vars | Remove-Item
$env_bak | % { Set-Item "env:$($_.Name)" $_.Value }
It looks like this was a cookie issue on my browsers.
Clearing cookies and caches on my troublesome browsers helped this to work as expected.
how do I connect my app to firebase? Do I use the standard web JS SDK, or is there something else I should be using?
You can use standard web JS SDK as well as the react-native-firebase package.
when I was trying to add firebase to my android app on the firebase console, it mentioned adding the firebase SDK to a build.gradle file - something which my project doesn't have. So have a missed a step in my setup?
I was able to setup react-native-firebase with expo managed workflow without having to touch the native android or ios side so these steps are not required if you will be using react-native-firebase with expo managed workflow as all the native dealing will be done by expo config plugins.
It is something with my local python. I've tried to run some code to get it busy
n = 100000
r = n + (n - 1)
for i in range(n):
s = r - (n + i)
h = r - (s * 2)
print(' ' * s, '#' * h)
Time shows 5.01s
that is too long. On another machine, time is less and there is no image tearing with the same code. Question is closed.
The warnings may very well be a quirk of VS 2022 Text Explorer.
I replicated a similar setup and didn't encounter a warning in JetBrains Rider, VS Code, or from the terminal with dotnet test
.
Maybe try either of the above options as well and see if you run into similar warnings?
I use openbox sloved this question.
As mentioned here in the quickstart guide [1]: https://hive.apache.org/developement/quickstart/
I believe the host name of the program is hiveserver2 instead of localhost, I have got it up and running in docker.
conio.h is:
->Nonstandard (used in the older MS-DOS days for keyboard input)
->Windows-specific (so womp womp if you're using Linux or MacOS)
->Very laggy (I built a game with conio.h--most laggy thing on earth--the _getch() call is probably the culprit, but the system("cls") is also pretty slow.)
So in general, just use ncurses, but if you're lucky enough to be able to use conio.h, use it to start. ncurses is still probably better though, even though I haven't used ncurses personally.
This is an older question, so I don’t know whether you have been able to find a satisfactory answer.
Referring to the example from the ortools documentation you used, just add the cumulative constraint while keeping everything else the same (as each and any of the other constraints are still valid):
capacity = 2 # Maximum capacity of 2 machines in use at any time
model.add_cumulative(
[all_tasks[job_id, task_id].interval for job_id, job in enumerate(jobs_data) for task_id, task in enumerate(job)],
[1] * len(all_tasks), # Demand of 1 for every interval
capacity
)
… basically, CP-SAT syntax of what Sascha explained
I have the same issue too. It started happening today morning and it was working fine. It only happened on 202410 because when I changed the version back to 202409 it worked fine.
I am calling https://api.linkedin.com/rest/me
and I have the r_basicprofile
permission.
"Not enough permissions to access: partnerApiIdentityMe.GET.20241001"
I've struggled with this too recently. The solution I've found was to ensure that the "Python" version that's associated with Python files, is the one with a rocket in its icon.
I'm not an expert in spring boot but I suspect it's because you defined two beans in the same name and they conflict/override.
See this on how to have two configs in one application: Spring Boot 2 Cassandra multiple keyspaces or clusters
I tried the above solution, but it gave an error, which was resolved by this code.
{{ MYCONSTANTS.HELLO | translate: { param: abc } }}
In your code if you are using appium server URL with /wd/hub, then please start Appium also with ‘--base-path=/wd/hub’
Or take out /wd/hub from the appium server URL.
.MapGet("{Id:guid}/string", async (Guid Id, Service service) =>...
I had a typo here where the bracket was misplaced to the end of the string
The plugin itself does not have Python API access.
There is a Python Plugins extension for Georefrencer available for download, but is listed as experimental.
https://plugins.qgis.org/plugins/GeorefExtension/version/3.0.5/
QGIS Python Plugins Repository Version: [3383] Georeferencer Extension 3.0.5 Experimental
I was having a similar issue trying to build my assets. It turns out that file extensions are case sensitive, so although according to the documentation 'jpg' are part of the known asset types, if your file is named '*.JPG', it will not recognize it as a plain 'jpg' image.
TL;DR: Make sure your file extensions are properly cased so Vite can interpret them correctly.
TL;DR - I implement the GetHashCode
method wrong for ValueObject
.
After creating a different project to test out the User
and ChangePasswordCode
, I find out that the problem lies in the UserId
value object as it works fine when I use Guid
as the primary key. At that time, I suspect that the change tracker may compare the 2 UserId
in User
and ChangePasswordCode
entries and somehow doesn't match the 2. So the problem could be in the Equals
and GetHashCode
method that I implement for ValueObject
.
By placing breakpoints in debug mode, I find out that the change tracker indeed calls the GetHashCode
first before the Equals
and it returns 2 different hash codes for the same UserId
. I fix the GetHashCode
method and it works now.
For JasperReports 7.0.1+ it's now ((net.sf.jasperreports.json.data.JsonDataSource)$P{REPORT_DATA_SOURCE}).subDataSource()
not ((net.sf.jasperreports.engine.data.JsonDataSource)$P{REPORT_DATA_SOURCE}).subDataSource()
If you are using a Mac, follow these steps to resolve the issue with Android Studio not showing the emulator/device name:
Open Activity Monitor: You can find this by opening Spotlight Search (Cmd + Space) and typing "Activity Monitor."
Check for ADB Instances: Look for any instances of adb (Android Debug Bridge) that might be running. It’s common to have multiple instances running, which can cause conflicts.
Force Quit ADB: Select each adb process and click on the 'X' button in the top-left corner of the Activity Monitor window to force quit them.
Restart Android Studio: After force quitting all adb processes, restart Android Studio. By doing this, Android Studio should now be able to detect the running emulator or connected device.
According this article, you can explicitly specify the number of threads to use via the RhpcBLASctl library
The .rc file shoule be encoded as utf-8 format, not utf-8(BOM) format. Open the file with notepad++ and choose encoding, change it to utf-8.
This issue is indeed related to theme tabler. It can be fixed by uninstalling the theme with:
composer remove backpack/theme-tabler
and reinstalling it with:
composer require backpack/theme-tabler
I change to IF-ELSE as workaround solution, it's simple way to solve this problem
Right click on the rack, select 'Edit style', delete the command 'childLayout=rack; and click Apply.
A motor or servo (if you choose to use a motor, you will need the L293D Motor driver) Picaxe 28X1 board and chip (this can be done with other microcontrollers, but I am using this one) A computer (Mac or PC, doesn't matter since the code will be on the board itself) AXEPad (Programming software for Picaxe, can be found for Mac OSX, Windows, and Linux)
NOTE: you will need a soldering iron and solder for this.Once you have your servo or motor connected, plug in the battery case, put three double A's into it, then plug the USB cable into the board and the computer. After that open up AXEPad. You are now ready to program it.
#Picaxe 28X1 #Terminal 4800 Do SerRxd b0 SerTxd( "You typed ", b0, CR, LF ) if b0 = "o" then 'the o can be changed to whatever letter you want (in this case o≠O, so you have twice as many options) servo 0,75 'this should be replaced by the motor command if you use a motor instead, It is high 4, low 5, or high 5, low 4 for one of them, or high 6, low 7, or high 7, low 6 for the other. wait 2 'this command is specifically for the servo, otherwise it will not turn all the way end if if b0="i" then 'again, this can be changed to suit your preferences and i≠I servo 0,225 'If you use a motor, switch the high and low values wait 2 'again, you don't need this if you are using a motor end if if b0 = "p" then servo 0, 150 'this centers the servo, put all values on low to stop the motor wait 2 end if Loop
Press f4, or go to PICAXE>check syntax to make sure everything is entered correctly, then press f5, or go to PICAXE>program to download the program to the board
After trying many solutions from Google and StackOverflow. I came to know that my code is correct the issue was with SMTP credentials. I have used other SMTP credentials and it worked.
Not good idea but maybe using controller to get table and in the view you can filter by where clause. example : controller.php
$ticket = DB::table('tiket');
and in the view you can using where clause. view.blade.php
@php
$ticket->where('tanggal', $tgl)->where('id_jadwal', $jadwal)->first();
@endphp
install them first.
sudo apt install libhdf5-dev libcapstone-dev
then delete build dir.
rm -rf build
finally, rebuild it.
I think you should try to add layout for your panel first.
Try adding xlim(c(<lower_limit>, <upper_limit>))
. From there, you can create another function to find where the 90th percentile (or another threshold) of your data lies - input that into your upper or lower limits.
In the left sidebar, under the list of repositories, select the "Manage notifications" dropdown menu and click Subscriptions. Select the notifications you want to unsubscribe from. In the top right, click Unsubscribe.
Apache Druid does not have native support for Oracle as a metadata storage option available. Instead, the error message specifies that the required Oracle extension is missing. Outside of the box, Druid natively supports PostgreSQL and Derby. Thus, if Oracle support is critical in your application, you would have to develop a custom extension or otherwise seek community-contributed plugins-though such efforts are not officially supported.
It is likely that Microsoft has locked down access to the IR camera for security, but I know some other people who have tried. From what I've been able to find, it seems like this was once possible on Windows 10 (with no recent news on Windows 11). Check out some prior attempts here and here
In Raft, the leader queues and processes requests in order rather than refusing them. Techniques like batching, pipelining, and asynchronous handling allow the leader to maintain high throughput and low latency, ensuring clients get a timely and consistent response.
Example:
Let’s say a leader is processing request1
when request2
arrives:
request1
is added to the log and sent to followers.request2
is added to the log and queued for replication.request1
is committed, the leader begins applying it to the state machine and simultaneously replicates request2
.request1
is applied to the state machine, and the response is sent to the client.request2
.You can see its implementation here https://github.com/dhyanio/discache/blob/main/rafter/raft.go
Testing based on the yaml files shared by you, I don't have the same error and the pipeline works fine.
azure-pipelines.yml:
trigger:
- none
pool:
vmImage: ubuntu-latest
extends:
template: pipeline.yml
parameters:
DefaultSettings:
Service1:
Setting1: Value1
Setting2: Value2
Service2:
Setting1: Value1
Environments:
Development:
Settings:
Service1:
Setting2: DevelopmentValue2
Service2:
Setting1: DevelopmentValue1
Test:
Settings:
Service2:
Setting1: TestValue1
pipeline.yml:
parameters:
- name: DefaultSettings
type: object
default: []
- name: Environments
type: object
default: []
stages:
- stage: Pipeline
jobs:
- job: job
steps:
- script: |
echo "ENVIRONMENTS: ${ENVIRONMENTS}"
echo "DEFAULTSETTINGS: ${DEFAULTSETTINGS}"
env:
ENVIRONMENTS: ${{ convertToJson(parameters.Environments) }}
DEFAULTSETTINGS: ${{ convertToJson(parameters.DefaultSettings) }}
- ${{ each environment in parameters.Environments }}:
- template: environment.yml
parameters:
Environment: ${{ environment.Value }}
DefaultSettings: ${{ parameters.DefaultSettings }}
environment.yml:
parameters:
- name: Environment
type: object
default: []
- name: DefaultSettings
type: object
default: []
stages:
- stage:
jobs:
- job: job
steps:
- script: |
echo "ENVIRONMENT: ${ENVIRONMENT}"
echo "DEFAULTSETTINGS: ${DEFAULTSETTINGS}"
env:
ENVIRONMENT: ${{ convertToJson(parameters.Environment) }}
DEFAULTSETTINGS: ${{ convertToJson(parameters.DefaultSettings) }}
- template: environment-stages.yml
parameters:
Settings:
${{ each service in parameters.DefaultSettings }}:
${{ service.Key }}:
${{ each setting in service.Value }}:
${{ setting.Key }}: ${{ coalesce(parameters.Environment.Settings[service.Key][setting.Key], setting.Value) }}
environment-stages.yml:
parameters:
- name: Settings
type: object
default: []
stages:
- stage:
jobs:
- job: job
steps:
- script: |
echo "Settings: ${SETTINGS}"
env:
SETTINGS: ${{ convertToJson(parameters.Settings) }}
Result:
I setup my Docker file with node version:22-alpine3.19. Downgrading the NodeJS version works.
Cassandra Java Driver 3.11 is compatible with Cassandra 4. But cassandra-unit is using Cassandra Java Driver 4.x. So it seems to me that your dependency is messed up.
Cassandra Java Driver 4.x used modern designs and introduced a lot of breaking changes. Cassandra Java Driver 3.x is not maintained anymore. I would recommend you to upgrade your driver to 4.x.
run command
brew install pkg-config
I used Cypress below version 10 and it worked normally with connections to Oracle, basic scripts, I updated Cypress to version 13 and it no longer works, I receive the error ORA12560, do you know how to fix it?
Quite late to the party, but what about merging the jobs and adding the condition to the step?
jobs:
build-deploy:
runs-on: ubuntu-latest
steps:
- name build
run: echo "build"
- name test
if: ${{ github.ref_name == 'main' }}
run: echo "build"
- name deploy
run: echo "deploy"
Can be multiple embedded.mobileprovision
Thank you for the code, this code can remove the shipping bar from woocommerce shipping orders and emails, but it will cause my account order to not see the shipping bar, please tell me how to make my account order can see the shipping bar normally and only remove the shipping bar from my emails, thank you again for the code, from China, thank you.
wsl --unregister docker-desktop run this in your powershell as administrator
How about a simple loop on column A where we check if the string starts with any of those, and if so, put N and add the rest back on?
Sub Replace_NX_NC_NL()
Dim ws As Worksheet
Dim lastRow As Long
Dim i As Long
Dim originalText As String
Dim modifiedText As String
' Set the worksheet to work on
Set ws = ThisWorkbook.Sheets(1) ' Change the index or name as necessary
' Find the last row in column A
lastRow = ws.Cells(ws.Rows.Count, "A").End(xlUp).Row
' Loop through each cell in column A
For i = 1 To lastRow
originalText = ws.Cells(i, "A").Value
modifiedText = originalText
' Check if the string starts with NL, NC, or NX
If Left(originalText, 2) = "NL" Or Left(originalText, 2) = "NC" Or Left(originalText, 2) = "NX" Then
' Replace the first occurrence of NL, NC, or NX with N
modifiedText = "N" & Mid(originalText, 3)
End If
' Paste the modified text into column C
ws.Cells(i, "C").Value = modifiedText
Next i
End Sub
For anyone who still struggling, I made it work using the code snippet below in python. Just pass the content_disposition argument when generating the SAS. Thanks to @user3102567 answer
output_sas_blob = generate_blob_sas(
account_name=storage_acct,
container_name=storage_cont,
blob_name=blobname,
account_key=storage_key,
permission=BlobSasPermissions(read=True, write=True, create=True),
expiry=datetime.utcnow() + timedelta(hours=1),
content_disposition=f"attachment; filename = {filename} "
)
Use like this:
response = supabase.table("faculty").select("*").execute()
df1 = pd.DataFrame(response[5:])
df1
or
response = supabase.table("faculty").select("*").execute()
df1 = pd.DataFrame(response['data'])
df1
I am not sure if your table response is a string or an object.