the same proble. Have you sloved ?

run this in terminal to remove all unused imports instead

dart fix --apply

If the machine is decimal, the bytes of rX represent 1235(100^3) + 3(100) + 1 = 1,235,000,301, and the divisor is 2(100) + 0 = 200. The quotient is then 6,175,001 remainder 101, and so the digital bytes of rA become 6 17 50 01.

But if the machine is binary, the bytes of rX represent 1235(64^3) + 3(64) + 1 = 323,748,033, and the divisor is 2(64) + 0 = 128. The quotient is 2529281 remainder 13, which can be written 9(64^3) + 41(64^2) + 32(64) + 1, and so the binary bytes of rA become 9 41 32 1. But 9(64) + 41 = 617, so bytes 2 and 3 can be interpreted as 617 regardless of whether the machine is decimal or binary. However, the less significant bytes are different.

Similarly, the last byte of rX is 1 for the decimal and binary calculations: the remainder is 1(100) + 1 in the decimal calculation, or 1 in the binary calculation. Either way, the least significant byte is 1. So the 617 in bytes 2-3 of rA, and the 1 in byte 5 of rX, are the same regardless, but all the other bytes are different, hence the question marks in all other byte slots.

I just found that in the pymeshlab version v2023.12.post2, the filter conditional_selection_filter has been renamed to compute_selection_by_condition_per_vertex.

what crazicrafter1 suggested worked for me. Instead of deleting the whole 21 lines or so I just replaced #include <winsock.h> inside the #ifndef WIN32_LEAN_AND_MEAN block to #inlcude <winsock2.h>.

im kinda new here and joined just to learn

Neither <img> nor <svg> are permitted content for a <textpath>.

Unfortunately, none of these answers work to show the same monitor numbers as Windows shows when there are multiple graphics card outputs. For example, if 2 monitors A and B are connected initially to graphics card outputs 1 and 2 this works, and the Windows monitor assignments will correspond to these as 1 and 2. If then you disconnect A and B from graphics card outputs 1 and 2 and connect to the graphics card output 3 and 4, the monitor numbers returned by the Regex method will return 3 and 4, which do not correspond to the Windows monitor numbers shown in display settings and will still show as 1 and 2. I am still struggling with how to find out the same numbers that the windows display with 3+ monitors and 5 graphics card outputs.

I just created two projects to reproduce your error, one locally and one in codesandbox: I couldn't reproduce it.

So what I suggest you to do is to create an empty project, with the same basic config of your current one, and just add the api folder first, test it and check my basic project here where I pull the message from the transform api using your same route.

https://codesandbox.io/p/devbox/swgnk9

Rendering title from API

API Response

What is weird is that what solved it for me was simply just changing opacity to 0.9. I don't know why but for some reason if you just change the opacity it starts working and it is no longer bugged I don't know what happened ngl

TLDR: Just change your .sum() in plot_collisions_bar() to .sum(numeric_only=True)

For details, the modified plot_collisions_bar() is listed below:

@app.callback(Output("graph", "figure"),
              [Input("date picker", "start_date"),
               Input("date picker", "end_date"),])
def plot_collisions_bar(start_date, end_date):
    fig = px.bar(
        (collisions
         .loc[collisions["DATE"].between(start_date, end_date)]
         .groupby("BOROUGH", as_index=False)
         .sum(numeric_only=True)   # <<< Change here
        )
        ,
        x="COLLISIONS",
        y="BOROUGH",
        title=f"Traffic Acci[![enter image description here][1]][1]dents in NYC between {start_date[:10]} and {end_date[:10]}"
    )
    return fig

I had to use PROMPT_COMMAND, setting PROMPT_COMMAND to a function that changes PS1. And I had to use the condition git rev-parse --is-inside-work-tree > /dev/null 2>&1 to validate whether it is a git repository or not.

Continue the above reply.

IDEA 2024.3.1 worked well on my MacOS, but the same problem occurred on Windows. I didn't do anything else during this period, which was puzzling. Now I use Android Studio as a temporary solution, which can avoid this problem. I suggest you try it. –

Now open the project with the faulty IDEA, and update the Android related components (about 400MB) according to the prompts (I forgot the screenshot.) , and the virtual machine related management components will all come back.

yes it is possible, you only need different alias when import the same cert in the JKS

Please provide more context on this to help you. Check your styles maybe you have some styling rule that is making that little circle appear.

The run involved 4 ‘steps’.

Each ‘step’ was an LLM call which included all the tool definitions as part of the prompt (i.e. input tokens).

In this case it would be the definitions of the smolagents base tools and your custom ones.

I encountered similar issue when running it on Spyder, for some reason i keep getting the same issue(InnerException Could not import pandas. Ensure a compatible version is installed by running: pip install azureml-dataprep[pandas]). I think it may be a spyder version. I tried the same code using VS code by activating the azureml env in VS code using conda activate env_name. It worked like a charm

my info = 

name: Nisrin, Age:35 Major: Cyber security Hobbies :`Hanging with my family, Travelling, Photography’

From my understanding AWS Lambda runs "Amazon Linux 2023" and does not allow installation of the system level libraries needed to run headless pyppeteer (yum install -y libX11 libX11-devel libXcomposite libXcursor libXdamage libXrandr libXi libXtst libXScrnSaver). I was able to get my script running on an E2C instance instead and would recommend others who face this problem to do the same.

this is the problem am also facing but it seems like no one has the answer to this issue

🚨 Unreliable Google Workspace Support: A Risk You Can't Afford! 🚨

"Never trust Google Workspace Support with your business—it could cost you everything." We’re calling on every IT professional, business owner, and tech enthusiast to hear our story. Since we registered our case on 6 November 2024 with Google Workspace support, our company has been drowning in chaos. We've faced immense losses due to Google's negligence and lack of support. Despite countless attempts to escalate, Google has ignored our cries for help, leaving us stranded. This isn’t just a complaint—it’s considered to be an order for Google Workspace to fix their broken support system and address the damages their negligence has caused.

Our Story: How Google Workspace Made Us Suffer 1️⃣ If you're seriously considering moving to Google Workspace, approach us for proof—we have all the documentation and clear objectives to help you make a clear and informed decision. 2️⃣ A problem arose, and we reached out to Google support—but what followed was no action, no empathy, and no resolution. 3️⃣ Since November 6, 2024, the issue has remained unresolved, leading to severe disruptions in our operations, strained relationships with clients, and significant losses for our business The result? Lost clients. Destroyed trust. Severe financial damage.

What Makes This Worse? Google, one of the largest tech giants in the world, has dismissed our case, treating it with shocking indifference. 🔴 Google Workspace support isn't just unreliable—it’s a catastrophic risk to IT operations. 🔴 A company the size of Google should set the bar for customer support, not undermine businesses like ours. Their lack of urgency isn’t just negligence; it’s a warning sign for any business considering trusting them.

Our Demands: Google Must Be Held Accountable ✅ Google must compensate us for the damages and losses their negligence caused. ✅ Google must prioritize Workspace support for businesses and overhaul their broken system. ✅ Sundar Pichai and every Google employee must hear this story—so that no other company suffers like ours.

Join the Movement: Help Us Hold Google Accountable 📢 Share this story with your network—everyone needs to know the risks. 📢 Tag Google employees and demand accountability. 📢 Tag @SundarPichai—let him know how Google's negligence is damaging businesses worldwide. 📢 Have a similar experience? Share your story and join us in demanding change!

Google: From Trusted Name to Unreliable Partner This isn’t just about us—it’s about the entire IT community. Together, we can ensure Google takes responsibility and provides the support every business deserves. Let’s not stay silent while more companies suffer due to their negligence!

I briefly looked at this. New user so I can only post answers, not comments yet. PyQt5 is built with SIP and at a very initial glance it looks like SIP might enumerate method implementations in advance and store them in a table of pointers.

It's possible that __getattribute__ isn't being invoked because SIP is avoiding the infrastructure that does this, as PyQt was designed decades ago when such highly efficient optimizations were really valued. However, this infrastructure has changed over releases, and there's a little value to making sure your Python and PyQt releases are up-to-date.

SIP has its own functionality for tracing functions but using this would likely mean rebuilding PyQt5 from its source.

It may be appropriate here to write a script to enumerate every possible method and generate tracing stubs. This is so useful for using PyQt that it may already exist somewhere. This is also the approach taken by SIP. All of these functions appear to me to be enumerated in site-packages/PyQt5/QtWidgets.pyi and are likely also visible with runtime introspection (dir(QWidget), import inspect; inspect.signature(method)).

I'm afraid I do not have a Qt-compatible python interpreter right now to give a properly tested answer here, and this answer likely contains mistakes.

Just remember some of the attributes of colorbar objects are for the main object and some of them are attributes of label module:

plt.colorbar(shrink = 1, orientation='horizontal').set_label(label='Label Example',size=15)

I phrased my question in the StackOverflow friendly way of 'should not be looking for opinion', but as its looking like the proper answer to my question might just be "No", I do appreciate the ideas that have been mentioned here, so I thought I'd put an idea im toying with up, thanks to TheodorZoulias advice to focus on my main concerns.

This idea requires an Immutable collection to initialize the class, but then returns it as an IReadOnly, alleviating my main concerns about both interfaces: I can be sure the data passed in will never be modified, and that users of the class won't be tripped up by mutation looking methods (eg Add)

public record class Class
{
    private readonly ImmutableList<string> _students = ImmutableList<string>.Empty;

    public IReadOnlyList<string> Students => _students;

    // Bit weird.. mainly to allow 'with', which is a nice feature of records 
    public ImmutableList<string> StudentsInit { init => _students = value ?? ImmutableList<string>.Empty; } 
    
    public Class(){}

    public Class(ImmutableList<string> students)
    {
        _students = students ?? ImmutableList<string>.Empty; // probably better to just throw if value is null..
    }
}

As you can see there is some funkyness here that could be improved by just rolling my own immutable collections sans the mutation looking functions, but in lieu of that..

For anyone interested, the solution was actually quite simple, basically, I added the sql command as my friend Erwin suggested.

def upgrade() -> None: op.execute("ALTER TABLE aluno ALTER COLUMN serie_aluno TYPE integer USING serie_aluno::text::int, ADD CONSTRAINT serie_aluno_serie_fkey FOREIGN KEY (serie_aluno) REFERENCES serie(id_serie);")

It looks like you want to trigger the reCAPTCHA when clicking "Book Now" and only submit the form if reCAPTCHA passes. From your code, I see you have the correct setup for reCAPTCHA, but you might be missing the crucial part of form submission.

Here's a quick fix:

1. Remove type="button" from the "Book Now" button.
2. Update the onSubmit function to ensure that it submits the form only after reCAPTCHA validation.

Here's how you can modify the JavaScript:

<script>
   function onSubmit(token) {
     document.getElementById("first-form").submit();  // Submit the form after validation
   }
</script>

The button should trigger the onSubmit callback when clicked:

<button 
    class="g-recaptcha btn btn-primary" 
    data-sitekey="your-site-key" 
    data-callback="onSubmit" 
    data-action="submit">
    Book Now
</button>

Make sure you also verify the reCAPTCHA response on the server-side (PHP) by sending the token to Google for validation. Let me know if that clears things up!

I've been trying for hours and couldn't find a solution. Did you solve it?

#RUN jenkins-plugin-cli --plugins "blueocean:1.25.3 docker-workflow:1.28" RUN /bin/sh -c jenkins-plugin-cli --plugins "blueocean:1.25.3 docker-workflow:1.28"

well, let me outline a way of implementing that:

firstly, make sure you have an exhaustive list of versions.

secondly, make sure you have a list of generated items for each version.

next, iterate through each version and add it to a version list.
what you would do now is iterate through each version, pick the first item literal, remove it from alls the other version item lists if the item is part of all of the version lists, you print a string that basically does what you did before "list.add(x)", where x is the literal.
if not, you add to a conditional list a sub string that conatins is an or operation along with the version.
now you can copy that string, which basically does what you asked for.

Are you running the program from the root directory? Is the scripts folder located in the directory you're trying to run the command from? (e.g., if the root is .../Documents/Project, this is where you would run cmd from, and deploy.js should be in /Project/scripts)

What you're doing with ItemDecoration doesn't work for touch events because it's only for drawing, not interacting. Instead, make the sticky header a separate view outside the RecyclerView. Use a scroll listener to update the header's data and position as you scroll. This lets the header handle clicks and touch events properly.

Tachiyomi Apk Aplikasi ini menawarkan kemudahan dan fleksibilitas untuk membaca manga secara gratis langsung dari perangkat Android Anda.

you can use transparent system navigation bar but unfortunately the button color with not adaptive need manually

The line "... repeated 996 more times" together with the 4 error lines shown gives 1000 Lines which is (afaik) the limit of the error stack.

Advice from 50 years of develoment: even stackspace is endless.

If you convert your formula to use Arrays (Python: Lists) and Arraypointers. you may notice the memory the formula needs.

Hint: Lists can allocate a lot of memory for your case.

I dug around again, and I think I've identified the root cause of the issue. Thanks to @hakre :)

If you run the command apk add composer, additional packages will be installed alongside composer (presumably as dependencies).

apk add --no-cache composer

(1/15) Installing php83-common (8.3.15-r0)
(2/15) Installing libedit (20240808.3.1-r0)
(3/15) Installing pcre2 (10.43-r0)
(4/15) Installing php83 (8.3.15-r0)
(5/15) Installing php83-phar (8.3.15-r0)
(6/15) Installing php83-curl (8.3.15-r0)
(7/15) Installing php83-iconv (8.3.15-r0)
(8/15) Installing php83-mbstring (8.3.15-r0)
(9/15) Installing php83-openssl (8.3.15-r0)
(10/15) Installing libbz2 (1.0.8-r6)
(11/15) Installing libzip (1.11.2-r0)
(12/15) Installing php83-zip (8.3.15-r0)
(13/15) Installing libstdc++ (14.2.0-r4)
(14/15) Installing 7zip (24.08-r0)
(15/15) Installing composer (2.8.4-r0)

I'm not sure what exactly happens after these packages are installed, but it somehow affects how the newly installed composer sees the path to the php interpreter.

The PHP binary path, which provides by the php:8.3-fpm-alpine image, looks like this: /usr/local/bin/php.

-rwxr-xr-x    1 root  root    /usr/local/bin/php

But the installed composer now looks at the new PHP binary path, (the newly installed php83 package): /usr/bin/php83.

-rwxr-xr-x    1 root  root    /usr/bin/php83

66dslot

66DSLOT adalah aplikasi untuk login ke situs online terpercaya yang anti-blokir

Caused by: java.lang.IllegalStateException: Ambiguous mapping. Cannot map 'topicController' method org.oracleone.forohub.controller.TopicController#deleteTopic(Long) to {DELETE [/api/topics/{id}]}: There is already 'topicController' bean method org.oracleone.forohub.controller.TopicController#deleteTopicById(Long) mapped.

so try to remove one ambiguous mapping in your TopicController

Thank you for your brilliant answer RRUZ! :-)
It's certainly not easy to work with the Windows Audio SDK in Delphi.
So I have modified the code slightly to make it easier to use as a volume control in a Delphi application...
See the Unit below >>

unit VolApiU;

// Original Api code from : https://stackoverflow.com/questions/17612666/controlling-the-master-speaker-volume-in-windows-7
// Thank you "RRUZ"!   :-)

interface

uses
  SysUtils, Windows, ActiveX, ComObj;

// Published functions
procedure InitVol;
procedure CloseVol;
procedure SetMasterVolume(VolP: integer);
function GetMasterVolume: integer;

implementation

const
  CLASS_IMMDeviceEnumerator : TGUID = '{BCDE0395-E52F-467C-8E3D-C4579291692E}';
  IID_IMMDeviceEnumerator : TGUID = '{A95664D2-9614-4F35-A746-DE8DB63617E6}';
  IID_IAudioEndpointVolume : TGUID = '{5CDF2C82-841E-4546-9722-0CF74078229A}';

type
  IAudioEndpointVolumeCallback = interface(IUnknown)
  ['{657804FA-D6AD-4496-8A60-352752AF4F89}']
  end;

  IAudioEndpointVolume = interface(IUnknown)
    ['{5CDF2C82-841E-4546-9722-0CF74078229A}']
    function RegisterControlChangeNotify(AudioEndPtVol: IAudioEndpointVolumeCallback): HRESULT; stdcall;
    function UnregisterControlChangeNotify(AudioEndPtVol: IAudioEndpointVolumeCallback): HRESULT; stdcall;
    function GetChannelCount(out PInteger): HRESULT; stdcall;
    function SetMasterVolumeLevel(fLevelDB: single; pguidEventContext: PGUID): HRESULT; stdcall;
    function SetMasterVolumeLevelScalar(fLevelDB: single; pguidEventContext: PGUID): HRESULT; stdcall;
    function GetMasterVolumeLevel(out fLevelDB: single): HRESULT; stdcall;
    function GetMasterVolumeLevelScalar(out fLevelDB: single): HRESULT; stdcall;
    function SetChannelVolumeLevel(nChannel: Integer; fLevelDB: double; pguidEventContext: PGUID): HRESULT; stdcall;
    function SetChannelVolumeLevelScalar(nChannel: Integer; fLevelDB: double; pguidEventContext: PGUID): HRESULT; stdcall;
    function GetChannelVolumeLevel(nChannel: Integer; out fLevelDB: double): HRESULT; stdcall;
    function GetChannelVolumeLevelScalar(nChannel: Integer; out fLevel: double): HRESULT; stdcall;
    function SetMute(bMute: Boolean; pguidEventContext: PGUID): HRESULT; stdcall;
    function GetMute(out bMute: Boolean): HRESULT; stdcall;
    function GetVolumeStepInfo(pnStep: Integer; out pnStepCount: Integer): HRESULT; stdcall;
    function VolumeStepUp(pguidEventContext: PGUID): HRESULT; stdcall;
    function VolumeStepDown(pguidEventContext: PGUID): HRESULT; stdcall;
    function QueryHardwareSupport(out pdwHardwareSupportMask): HRESULT; stdcall;
    function GetVolumeRange(out pflVolumeMindB: double; out pflVolumeMaxdB: double; out pflVolumeIncrementdB: double): HRESULT; stdcall;
  end;

  IAudioMeterInformation = interface(IUnknown)
  ['{C02216F6-8C67-4B5B-9D00-D008E73E0064}']
  end;

  IPropertyStore = interface(IUnknown)
  end;

  IMMDevice = interface(IUnknown)
  ['{D666063F-1587-4E43-81F1-B948E807363F}']
    function Activate(const refId: TGUID; dwClsCtx: DWORD;  pActivationParams: PInteger; out pEndpointVolume: IAudioEndpointVolume): HRESULT; stdCall;
    function OpenPropertyStore(stgmAccess: DWORD; out ppProperties: IPropertyStore): HRESULT; stdcall;
    function GetId(out ppstrId: PLPWSTR): HRESULT; stdcall;
    function GetState(out State: Integer): HRESULT; stdcall;
  end;


  IMMDeviceCollection = interface(IUnknown)
  ['{0BD7A1BE-7A1A-44DB-8397-CC5392387B5E}']
  end;

  IMMNotificationClient = interface(IUnknown)
  ['{7991EEC9-7E89-4D85-8390-6C703CEC60C0}']
  end;

  IMMDeviceEnumerator = interface(IUnknown)
  ['{A95664D2-9614-4F35-A746-DE8DB63617E6}']
    function EnumAudioEndpoints(dataFlow: TOleEnum; deviceState: SYSUINT; DevCollection: IMMDeviceCollection): HRESULT; stdcall;
    function GetDefaultAudioEndpoint(EDF: SYSUINT; ER: SYSUINT; out Dev :IMMDevice ): HRESULT; stdcall;
    function GetDevice(pwstrId: pointer; out Dev: IMMDevice): HRESULT; stdcall;
    function RegisterEndpointNotificationCallback(pClient: IMMNotificationClient): HRESULT; stdcall;
  end;


var
  pEndpointVolume: IAudioEndpointVolume;


procedure InitVol;
var
  LDeviceEnumerator: IMMDeviceEnumerator;
  Dev: IMMDevice;
begin
  try
    CoInitialize(nil);
  except
    on E:Exception do
        Writeln(E.Classname, ':', E.Message);
  end;

  if not Succeeded(CoCreateInstance(CLASS_IMMDeviceEnumerator, nil, CLSCTX_INPROC_SERVER, IID_IMMDeviceEnumerator, LDeviceEnumerator)) then
    RaiseLastWin32Error;

  if not Succeeded(LDeviceEnumerator.GetDefaultAudioEndpoint($00000000, $00000000, Dev)) then
    RaiseLastWin32Error;

  if not Succeeded( Dev.Activate(IID_IAudioEndpointVolume, CLSCTX_INPROC_SERVER, nil, pEndpointVolume)) then
    RaiseLastWin32Error;
end;


procedure CloseVol;
begin
  try
    CoUninitialize;
  except
    on E:Exception do
        Writeln(E.Classname, ':', E.Message);
  end;
end;


procedure SetMasterVolume(VolP: integer); // 0 - 100
var
  fLevelSc: single;  // 0.0 - 1.0
begin
  fLevelSc := VolP / 100;

  if not Succeeded(pEndpointVolume.SetMasterVolumeLevelScalar(fLevelSc, nil)) then
    RaiseLastWin32Error;
end;


function GetMasterVolume: integer;  // 0 - 100
var
  fLevelSc: single; // 0.0 - 1.0
begin
  if not Succeeded(pEndpointVolume.GetMasterVolumeLevelScalar(fLevelSc)) then
    RaiseLastWin32Error;

  Result := Round(fLevelSc * 100);
end;


end.

Using this unit; here is an easy example of how to use it to control the master volume.
It is a Form with a Edit and TrackBar on it (set the Max = 100) >>

unit VolTestU;

interface

uses
  Windows, Messages, SysUtils, Classes, Graphics, Controls, Forms, Dialogs,
  ComCtrls, StdCtrls;

type
  TForm1 = class(TForm)
    TrackBar1: TTrackBar;
    Edit1: TEdit;
    procedure FormCreate(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure FormDestroy(Sender: TObject);
    procedure TrackBar1Change(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }
  end;


var
  Form1: TForm1;

implementation

{$R *.DFM}

uses VolApiU;


procedure TForm1.FormCreate(Sender: TObject);
begin
  VolApiU.InitVol;
end;

procedure TForm1.FormShow(Sender: TObject);
var
  VolP : integer; // Volume in Precentage 0 - 100%
begin
   VolP := VolApiU.GetMasterVolume; // Get the volume 0 - 100
   TrackBar1.Position := VolP;
   Edit1.Text := IntToStr(VolP);
end;

procedure TForm1.FormDestroy(Sender: TObject);
begin
  VolApiU.CloseVol;
end;

procedure TForm1.TrackBar1Change(Sender: TObject);
begin
  VolApiU.SetMasterVolume(TrackBar1.Position); // Set the volume  0 - 100
  Edit1.Text := IntToStr(TrackBar1.Position);
end;

end.

Hope someone finds it useful. :-)

can you please demonstrate same thing with html, css, and javascript

try some of the solutions from this answer. it looks like the problems are with gyp not finding your python install, so it wouldn't hurt to reinstall python as well.

I can try this plugin Vuetify Notifier

https://kieuminhcanh.github.io/vuetify-notifier/

In jq it's the // operation. Very useful when null is returned instead of a list:

.foo // [] | map(...)

I eventually solved it, using Koin DI, i stated the viewmodels as; singleOf() instead of factoryOf(), it was causing the viewmodels to not respond when i navigated between screens, until total app restart.

updating my Dockerfile this way did the trick. in my base stage, i added

RUN apt-get install libmariadb3 libmariadb-dev -y

move the prisma folder out of the src folder to the root. This will solve the issue

Try shortcut key Ctrl+. or update VS https://code.visualstudio.com/docs/editor/refactoring#_refactoring-actions

As stated by @musab-dogan, it is worth noting to change your password. To change your password, you can use the command below:

/usr/share/elasticsearch/bin/elasticsearch-reset-password -u elastic

When you also applied changing your password, make sure you do the following:

$ echo "<your-new-password>" > /etc/elasticsearch/certs/keystore.tmp 
$ chmod 600 /etc/elasticsearch/certs/keystore.tmp 
$ chown elasticsearch.elasticsearch /etc/elasticsearch/certs/keystore.tmp 
$ sudo systemctl set-environment ES_KEYSTORE_PASSPHRASE_FILE=/etc/elasticsearch/certs/keystore.tmp

If you want guidance on installing Elasticsearch, please check if this article is helpful for you especially with your experience on password issues.

Wrap widget is by default horizontal, you need to check that the items in the wrap have bounded width, if not each one will be a single row. Verify ItemTags does that.

The python-openvpn-client 0.0.1 is for Unix-like systems like Linux, macOS or BSD. It's page says it was tested to work on macOS and Linux.
The Windows systems do not support POSIX signals like SIGUSR1, that's why you have this error message because SIGURS1 is not defined. POSIX signals are supported on Unix-like systems.

You could try openvpn-api.

For the solution, I wrapped my select with this div:

<div wire:ignore>
 <!-- content in here -->
</div>

And that fixed the issue.

I want to redirect my site from non-www to www, please how can i do it.

https://techsolvedissues.com to https://www.techsolvedissues.com

This is horrible I was finding a module wasn't built where I had

file1.o: a.h b.h (etc)

But I had a blank line with a single tab in it before "file1.o".

My name is Leticia Leon Email: [email protected] My numbers is 512)770-7338

I’m no longer working for MPG security solutions since December23,2024

Wife Manger of the company Mpg security solutions She also the payroll lady and the GPS lady 512) 944-9950

There both are couples working for the same company

Husband Arnold Guzman Email: [email protected] Is the one that talks to workes and talks to the main propertys managers 512) 669-6433

I think the prior answers all adequately discus the preference for set-based updates, and also provide examples using WHILE to iteratively loop through the rows as the OP asked.

One thing not mentioned here is the impact of row locks when doing a large set-based update.

My understanding is that an update that will be updating many rows in the table will cause them all to be locked as a single transaction, possibly blocking other operations. IF the update being done doesn't have to have consistent results within the set, looping through each one and committing as you go, albeit a slower process, can significantly reduce locks throughout the process.

Essentially, I'm suggesting that sets are more efficient, but if doing a set-based update on large #'s, use LIMIT cause or another method to reduce lock impact for other users (if that's relevant to you)

Vuetify Notifier. This plugin can solve your problem.

https://kieuminhcanh.github.io/vuetify-notifier/

In my case, it was a problem with a setting in Idea. A project sub-module ended up with a really strange setting in Build, Execution, Deployment -> Compiler -> Annotation Processors. Changing the sub-module option to Obtain processors from project classpath fixed the issue.

Since no one came here to give a good answer, then we could just imagine the Keras guy banged his head hard just before coming up with this counter intuitive naming convention, and whenever we want to remember the correct name, just exchange them:

• lots of zeros? "categorical"
• no zeros? "sparse categorical" 🤪

I seem to be getting something similar when trying to use .env files.

The package at "node_modules/dotenv/lib/main.js" attempted to import the Node standard library module "path".
It failed because the native React runtime does not include the Node standard library.

Still trying to find a solution :(

I would check out JSTS. This is a javascript port of a java library JTS that implements many operations on geometries.

Mainly the CascadedPolygonUnion operation looks like a good match with what you are trying to accomplish.

This might have an answer that works for you... it works for me.

Plot Lat/Lng values on a static image map using .NET

I would want to download the data from genebass, which says "Bucket is a requester pays bucket". Does it means that I need to pay to download this data? Thanks.

What worked for me was

1. Unchecking everything in Build Settings => Player Settings => Publishing Settings => Build

2. Clicking Okay in the dialog that pops up

3. Downgrading the Firebase Core Unity package to version 11.6.0 (as well as the Auth and Database packages in my case)

To me this appears to be a bug in the Unity Firebase Core package. Hopefully Google will fix it. I tried to downgrade to newer versions than 11.6.0 but it was the most recent one that didn't show errors

there is a change on content to contentRef

Please help me understand what went wrong ;(

So many things that are wrong in this program! The AI wasn't even able to draw a solid square at (x,y) using BIOS.WritePixel. (A solid white square could get displayed in the upper left corner of the screen). And why a different code was needed to wipe the square is beyond me. Same procedure, other set of arguments.

push bx
pop  bx

BX wasn't initialized to anything, so why waste bytes on preserving BX.

mov ax, y
add ax, cx
mov si, ax

BIOS.WritePixel expects its Y coordinate in the DX register, so very much not SI.

mov ax, x
add ax, dx
mov di, ax

BIOS.WritePixel expects its X coordinate in the CX register, so very much not DI.

My version:

  mov  cx, x
  mov  dx, y
  mov  al, 15           ; To 'clear' the square, you pass AL=0
  call PaintSquare

  ...

; IN (al,cx,dx)
PaintSquare:
  push bx               ; AL is Color=[0,255]
  push si               ; CX is X=[0,319]
  push di               ; DX is Y=[0,199]

  mov  bh, 0            ; DisplayPage
  mov  di, size_square  ; Height
.OuterLoop:
  mov  si, size_square  ; Width
.InnerLoop:
  mov  ah, 0Ch          ; BIOS.WritePixel
  int  10h
  inc  cx               ; X++
  dec  si
  jnz  .InnerLoop
  sub  cx, size_square
  inc  dx               ; Y++
  dec  di
  jnz  .OuterLoop
  sub  dx, size_square

  pop  di
  pop  si
  pop  bx
  ret

prev_x dw 100      ; Previous x position of square
prev_y dw 100      ; Previous y position of square

The AI is loading prev_x and prev_y with the coordinates where the mouse click was registered. This is unrelated to where the square needs to be erased!
Moreover, before any dragging can begin, you still need to check whether the mouse is actually on top of the current square.

exit_program:
  ; Restore text mode
  mov ax, 3
  int 10h
  ret

Although the AI included this nice 'exit_program' part, this code is unreachable and if jumped at, its ret could only return to DOS is this were a .COM executable. Sadly, the .model small says this is going to be an .EXE executable, for which additionally the DS segment register wasn't setup and therefore addressing the memory-based variables will fail completely.

The list goes on...

My suggestion then would be that you forget about using the mouse for now, and that, with the help of my PaintSquare procedure, you try your hand at a version of the program that moves the square based on the arrow keys on the keyboard. In the intrest of flicker-free graphics you could use a double buffer like you described in one of your comments. Good luck.

Check RAILS_MASTER_KEY in the .env if exists.

foreman with Procfile can cause this issue as it looks through .env first for the master key.

I had this problem and I solved it by excluding the Folder where my project is located from the Antivirus program: Settings - Virus protection - Exclude folder (your project folder) from Virus scan.

This may not be considered as an "answer" and I should have reponded as a comment but I do not have enough reputation to do so. If you want to run a simple Python command in R you can use py_run_string.

library(reticulate)
py_run_string("print('Hello World')")

Alternatively, you can use import_builtins

main <- import_main()
builtins <- import_builtins()
builtins$print('Hello world')

The overview page of the reticulate library has good information, and I think it will address majority of your questions.

Trying to make it simple (here C0 and C1 are the same language but different versions):

• new C0 programming lang => asm compiler for C0 => bin0 (executable) [eg: slow runtime]

• C1 programming lang using C0 lang => runs on bin0 => bin1 (executable) [runtime is slow as we run on bin0 but we got a new instruction set bin1 which is fast, next time it's going to faster runtime]

• writing standard library (eg: vector) for C1 in C1 programming lang => runs on bin1 (faster) => executable for standard library (vector)

pygooglenews 0.1.3 only supports Python 3.12 and 3.13. There's no support for python3.9 (your version). Upgrade to a supported version to use this library.

Update January 2025

As @browsermator commented, there are two environment variables that are relevant. I'd like to add that somewhere between 2023 and 2025 the environment variable name has changed to: "SE_CACHE_PATH" for the cache dir

Source: (the link that browsermator provided)

I ended up using Adam Essenmacher's AdamE.MemoryToolkit.Maui. It was a lifesaver (appsaver) for me. Cleared up all my memory leak issues. I just migrated to .NET 9.0 and will have to see if the memory issues still persist.

No se si esta cerrado esta respuesta porque es la primera vez que respondo en SO. En laravel 11 si tenes instalado VITE, solo tenes que poner la ruta relativa en tu cadena de vite. Los pasos son:

1. Instalas jquery
2. Buscas el archivo donde se instalo en tu proyecto laravel
3. boton derecho y copias la ruta relativa.
4. la pones en vite como en el ejemplo, te la pondra con las contra barras () tenes que cambiarlas por las barras normales (/).
5. npm run dev listo!

ejemplo:

   @vite(['resources/css/app.css', 'resources/js/app.js','resources/jquery/jquery.js'])

Because your code does double-runs itself: at the end of the first turn finalstep calls start but then bot's message handler calls start again.

What you need is to manually resolve the async PageParams. This is what worked for me-

interface PageProps {
   searchParams: Promise<{
       [key: string]: string | string[] | undefined;
   }>;
  }

const Page = async ({ searchParams }: PageProps) => {
   const resolvedSearchParams = await searchParams;
    const { id } = resolvedSearchParams;

Had same problem using same book. When you install pgzero and pygame from command prompt you have to run the command prompt itself as administrator. It's not enough to just be in an admin account within Windows.

Make sure to uninstall them both from command prompt before attempting to install again:

pip uninstall pygame

pip uninstall pgzero

/storage/emulated/0/Documents/ringtone/trending_JO_1d_20241226-0032.ods

If you still facing this issue, here is another work-around that worked for me. https://github.com/orgs/community/discussions/45097

In make.powerapps.com open the table screen, then choose Properties in the Table Properties box. Then in the popup scroll to the bottom and open Advanced Options. Towards the bottom there is the checkbox for 'Can be taken offline'. Uncheck that, export your solution again, and it should import without this error.

In my experience its caused by the checkbox 'Can be taken offline'. This must be DESELECTED for any tables that are being imported in to a Dataverse for Teams environment. Microsoft started turning this option on by default for new tables about a year ago. AFAIK D4T environments do not support offline mode. I just had this come up again and hoping this will act as a reminder for next time!

Full error for me: Solution "XYZ_1_0_0_117_managed.zip" failed to import: ImportAsHolding failed with exception :No rows could be found for OptionSet with id e31907e5-e67d-4961-87fd-9ef4e296fbba if OptionSet were published

you have forgotten to use rbenv global, which makes your installed implementation the default ruby instead of the system implementation.

$page.params.status = "FINAL" is true when all required parameters are filled. I tested it too: first required and second no and the condition was $page.params.status = "FINAL" after filling the first, the flow moved to the next page. please check it again

keepExif() is available as of 0.33.0

https://sharp.pixelplumbing.com/api-output#keepexif

Sharp(data.Body)
      .keepExif()
      .resize(width, height)
      .toFormat('png')
      .toBuffer()

Because your server knows nothing about your url. When your server encounters this url, it does not route it to your index page, where then angular can bootstrap your application.

Or using justniffer

justniffer -i eth0

https://github.com/onotelli/justniffer

The issue is in how u are comparing the color in code. When we call turtle.color() it return a tuple (pen_color , fill_color). And turtle.color is a method so comparing will not work.

This can be done depending on what color u want to access either pen_color or fiil_color.

turtle.color("green")

turtle.color()

('green', 'green')

turtle.color()[0] #pen_color

("green")

turtle.color()[1] #fill_color

("green")

turtle.color()==("green")

False

turtle.color()==('green', 'green')

True

turtle.color()[1] == "green"

True

turtle.color()[0] == "green"

True

I had a same problem with 2022.3.20f1 version. I tried plenty things, but finally I didn't find solution. So I installed the 2022.3.55f1 version, where isn't this problem.

You need to pass your authOptions to the getServerSession function.

const session = await getServerSession(authOptions);
console.log(session.access_token);

Clearly one of those, "I could be missing something really obvious," issues. While not shown here, my statement to add the facets block was adding it to the overall post object (this.facets = { ... }). But the facets block should be added to the record block (this.record.facets = { ... }). Now that I've made that update, the hashtag is appearing as expected.

Now to see if I can extend that to mentions and links.

Thanks to a reddit user for helping with this one.

try running PS with administrator rights. worked for me

Activate Zen mode (Cmd-K, Z for Mac). Make sure to release Cmd before typing the second keystroke.

To return, type that command again or hit Escape, Escape.

Tiktok API is VERY ANNOYING. During 2024, I found myself combing through every post on StackOverflow, Reddit, and beyond just to figure out how to integrate it into my code... and when I FINALLY managed to learn the right way to create a post via API, OH SURPRISE—I can't make my posts PUBLIC TO EVERYONE? WHY, I asked myself? I read the docs and found out... you have to go through an endless TIKTOK audit just to upload a few videos monthly via API. Just DISGUSTING.

SOOOO, what I did was go through the AUDIT and create an APP so everyone can upload their TikTok videos in just a few clicks with a single API call. Check it out: https://www.upload-post.com/

I let you post 10 monthly videos for FREE directly to public TIKTOK. Later, I'll start adding more platforms like Instagram, Facebook, and LinkedIn because their docs are just as bad—and each one makes your life IMPOSSIBLE if you just want to upload a single video. Enjoy!

I tested the network with the training data and the accuracy was 89%.

when I test it after training, the accuracy is 10%

Have you shuffled your training dataset? Since there are 10 target classes (digits 0-9) you should have an equal distribution of all the digits in your training dataset.

If you miss this, the neural network model will not be evenly trained for recognizing all digits, and it will only perform well for the digits it has seen during training.

A small sample size may also lead to a high training accuracy and low test accuracy situation. Ideally, you would like your model to see the variations in the handwritten datasets, the more variation it sees, the better it will be adapted when being tested. You can try to increase your training dataset size to improve this.

I think that Oracle Database Express Edition (XE) deployment on Ubuntu is not officially supported. Attempting to adapt the RPM package for use with dpkg or other methods can be a challenging process, and I don't believe it’s the recommended approach for this installation.

Instead, I recommend using a Docker container. With Docker, you can deploy the version of Oracle XE you need without issues, just as you would with any other software.

Here is a guide for deploying Oracle Express 21.3.0 on Ubuntu 22.04. This guide can be adapted to any version of Ubuntu or Oracle Express.

Using this method, you can also spin up the database whenever you need it without having it directly installed on your host machine. This approach is more portable, manageable, and avoids the complexities of unsupported installations.

I create Icon from https://www.appicon.co/ with same name in the icons and issue fixed

I've had the same problem. I usually load the first browser page which does this, then I load a second browser page to get around it. However, now that I've added the recent update (updated on January 11, 2025) there is no getting away from it. When I was in a different country, there were young people I talked with who would tell my to download a protection like antivirus protection that would show all the trackers who were tracking you. You could actually get rid of some of the microsoft lines of code that were doing this. I haven't been able to correct this error only by what I did above, but after the recent update, I have found that I can't get around this. I think it sends the info of the link you clicked to whomever is collecting the data on your browsing habits. It is more common on servers out of Europe.

En mi caso, use este código en onCreate para Kotlin.

    if (OpenCVLoader.initLocal()) {
        println("OpenCV loaded successfully")
    } else {
        println("OpenCV initialization failed!")
        return
    }

Select the code you want to comment on, press Command, K, and C. If you want to uncomment, it's simple: press Command, K, and U. That's all.

You can check emulator authorization. Open the emulator and check if there's an authorization dialog asking for permission to accept the RSA key. If so, accept it. If the dialog doesn't appear, try deleting the .android/avd/YourAVD.avd folder and recreate the AVD. Another way is increasing emulator RAM. Open Android Studio, go to AVD Manager, select your emulator, and click on Edit. Increase the RAM size under the Memory and Storage section. I hope you can fix it.

Did u normalize your data and try changing your random seed ?

is there anyway to fix the black placeholder text color?

If it was a angular project and there is nx console enabled that could be the reason. Remove/ delete angular.json file from root folder and try again.