PowerShell will not allow you to execute scripts at will. You can change that behavior by running this in an elevated terminal (run as admin):

Set-ExecutionPolicy Unrestricted

The documentation is here.

-Edit-

Adding the -Scope Process flag is generally encouraged.

Needed to convert absolute address to offset using:

std::uint64_t convertToVMA(void* addr)
{
    Dl_info info;
    struct link_map* link_map;
    dladdr1((void*)addr, &info, (void**)&link_map, RTLD_DL_LINKMAP);
    return reinterpret_cast<std::uint64_t>(addr) - link_map->l_addr;
}

Tanks to Md. Yeasin Sheikh, i found a solution using ValueGetter, just updating the value inside copyWith methos like this

RegistrationState copyWith({
//change this
ValueGetter<DateTime?>? birthday, 
String? email,
String? password,
}) {  
    return RegistrationState(
        //and this
        birthday: birthday != null ? birthday() : this.birthday
        specialty: specialty ?? this.specialty,
        email: email ?? this.email,
    ); 
}

and then just calling it from cubit function like this

void updateBirthday(DateTime? birthday) {
    emit(state.copyWith(birthday: () => birthday));
}

You can't do that with airflow, dynamic task mapping is about having N run of a task where N is decide at run time.

So if you have a pipeline task_a >> task_b (where each is a dynamic task) airflow will run the N task_a then and only then the M task_b

The problem was with UpdateCommand, I should've replace it with UpdateItemCommand

As @Maurice said, lambda@edge will be more expensive. And you should also consider the impact on your latency especially if you add your lambda@edge on your viewer request... CloudFront access logs would be the best approach and if you need more logs, you can try real-time logs. That will give you access to cs-headers field that should contain what you're looking for. Downsite would be the cost, real-time logs are more expensive than standard access logs.

Other option would be to use Cloudfront Functions, it's basically like lambda@edge with much less feature but the cost and latency are much better. You won't be able to use DynamoDB, but you can write some logs

And for your question about targeting only the first page load, you should be able to do it by checking the referrer header value. It should be different than your host value.

This also happens if you are using nx with an incompatible nodejs version mostly becuase you are using nvm to manage multiple versions of node (say 14 and 20).

To solve this, make sure to switch to the recent version of node (20) with

nvm use 20

Now install nx with your latest node

npm install -g nx

I answer my own question.

The answer is this Create Pinned Shortcut

Just follow the tutorial and you will make it.

I used snpe-onnx-to-dlc -i abc.onnx -o abc.dlc (this model has 9 output) caseA --out_name 359........ or CaseB no use --out_name

The output is only 373.raw

snpe-dlc-info -i xxxx.dlc

| Input Name | Dimensions | Type | Encoding Info |

| images | 1,640,640,3 | Float_32 | No encoding info for this tensor |

| Output Name | Dimensions | Type | Encoding Info |

| 359 | 1,20,20,64 | Float_32 | No encoding info for this tensor |

| 346 | 1,40,40,8 | Float_32 | No encoding info for this tensor |

| 325 | 1,80,80,8 | Float_32 | No encoding info for this tensor |

| 338 | 1,40,40,64 | Float_32 | No encoding info for this tensor |

| 317 | 1,80,80,64 | Float_32 | No encoding info for this tensor |

| 331 | 1,80,80,1 | Float_32 | No encoding info for this tensor |

| 352 | 1,40,40,1 | Float_32 | No encoding info for this tensor |

| 373 | 1,20,20,1 | Float_32 | No encoding info for this tensor |

| 367 | 1,20,20,8 | Float_32 | No encoding info for this tensor |

How do I fix this error?

It seems the only real way is to scale down to 1 instance, SSH to that instance, it is the only one running, right? Then scale back up.

Kill the instance. This depends upon getting poweroff to work.

Using combination of stemmer could solve it:

https://www.linkedin.com/pulse/handling-singular-plural-forms-word-elasticsearch-sponchiado-p26cc/?trackingId=%2FEVCoOaBS1aVdF3mhg1lWg%3D%3D

Do you think that something like it could be work for you?

           Center(
              child: Material(
            color: Colors.transparent,
            child: InkWell(
              onHover: (val) {
                setState(() {
                  colorHover = val ? Colors.red : Colors.yellow;
                });
              },
              onTap: () {},
              child: AnimatedContainer(
                color: colorHover,
                height: 400,
                width: 400,
                duration: Duration(milliseconds: 200),
                curve: Curves.easeIn,
                child: Container(
                  height: 400,
                  width: 400,
                ),
              ),
            ),
          )),

Need to declare Color colorHover = Colors.yellow;

If the lambda function isn't even being called, it means you have an issue on the API Gateway configuration. Have you deployed your API with a new Stage for it to be accessible? I can't see the errors or the POST/GET verbs on the same route.

I found the answer, it wants a reference so put &buffer instead of buffer. Why is it that you always find the answer right after posting a question?

I'll set this as the answer in a few days

Registering the service component that uses dbContext as transient, not as scoped, solved the issue.

i see your repository project remove tailwind.config.js :)

It was the directory where my projects were stored. I (usually) store my projects in a directory in my user folder (C:\users<username>), which my organisation has access to.

I moved the project to a directory on the root of my orgs laptop hard drive and it started fine.

Ive sent a strongly worded email to our IT asking if a new permissions policy was enforced or similar in recent weeks.

I think the problem is the relationship between project and task tables are inactive. Please try to change the relationship to active.

1. You need to verify first that you have an account with the license up to date at App Developers Account.
2. Once done this go and create a certificate at https://developer.apple.com/account/resources/certificates/list
3. Select Distribution type on the list and download it to your device.
4. Once done this you should quit and open XCode and you should be good to upload your build now.

try this

import { use } from "react";
    
export default function CategoryDetail({params}: {params: Promise<{ id: string }>}) {
const { id } = use(params);
...

My issue had to do with the fact that I sent the same file request too many times in little time, maybe you did the same and need to give things a 20 min cool down like I did, and it may work then.

I think Gdown has a quota on the density of repeated access requests. Hope this helps anyone.

There's a tool called SpeakerSplit here's their info: https://speakersplit.io/#/about it uses AI to separate the speakers on an audio track into two separate files. It also does transcription/diarization so you know which speaker is talking. I've tried them out on Notebook LM podcasts and it saved me an 1hr of editing, to like 2 minutes! The service is not free, but its very cheap.

Can we close this issue? You already received correct comments helping you to deal with your if blocks. And I'll add something completely different: the interest here is not to touch any code-behind, View Model, and no code at all. After all, what you want are mere decorative details. It would be not nice to contaminate code with them.

Let's try to implement it in pure XAML:

    <Window x:Class="SA.View.WindowMain"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        Title="WindowMain" Height="450" Width="800">
    <Grid>
        <Grid.RowDefinitions>
            <RowDefinition Height="Auto"/>
            <RowDefinition Height="*"/>
        </Grid.RowDefinitions>
        <Border BorderBrush="Black" BorderThickness="1"
                Padding="10 4 10 4">
            <TextBlock>Command bar</TextBlock>
            <Border.Style>
                <Style TargetType="Border">
                    <Style.Triggers>
                        <DataTrigger
                            Binding="{Binding WindowState,
                            RelativeSource=
                            {RelativeSource AncestorType=Window}}"
                            Value="Maximized">
                                <Setter Property="CornerRadius" Value="0"/>
                                <Setter Property="Margin" Value="0 0 0 4"/>
                        </DataTrigger>
                        <DataTrigger Binding="{Binding WindowState,
                            RelativeSource=
                            {RelativeSource AncestorType=Window}}"
                            Value="Normal">
                                <Setter Property="CornerRadius" Value="9"/>
                                <Setter Property="Margin" Value="8 4 8 4"/>
                        </DataTrigger>
                    </Style.Triggers>
                </Style>
            </Border.Style>
        </Border>
    </Grid>
</Window>

Here, RelativeSource binding is used to handle property changed events from the parent Window recognized by its type. I also added another Setter to both data triggers to change the bar border margins, to make it look nicer when the corners get rounded.

I hope you don't want to change also the bar visibility any longer, but if you want, you don't need any setters in the data triggers except

<Setter Property="Visibility" Value="Collapsed"/>
<!-- ... -->
<!-- and -->
<Setter Property="Visibility" Value="Visible"/>

This way, you could change the bar visibility depending on the window state, and border radius and other properties could be static because you don't need to change them if the element is invisible.

In Visual Studio,

• go to Debug|Windows|Exception Settings, make sure that it will break on "CLR Exceptions" and "Managed Debugging Assistants"
• start your application under Visual Studio Debugger
• when exception in Dispose occurs, Visual Studio Debugger will stop
• go to Debug|Windows|Call Stack, you will see who was calling whom. You can also double-click on the line in the Call Stack window. This will bring you to that line in your code, and you will be able to see all variables visible in that particular stack frame.

The issue, as it turns out, is that I did not execute a "Save" for the file after the runner was up and going. So after executing dart run build_runner watch -d I needed to File-Save for the part to be executed and created. Once that occurred, all worked as expected.

I am seeing same issue with custom buttons. They do nothing. I switched to having no buttons and using the default go back. That crashes the app.

Found the answer using strace. I set TCP_CORK wrongly, and I may have to disable TCP_CORK afterwards, at least that's what Nginx does.

Here's the code I used to solve the issue (sending PSH FIN in one go):

setsockopt(event->data.fd, SOL_TCP, TCP_CORK, &enable, sizeof(int));
send(event->data.fd, response.c_str(), response.size(), MSG_NOSIGNAL);
shutdown(event->data.fd, SHUT_WR);
setsockopt(event->data.fd, SOL_TCP, TCP_CORK, &disable, sizeof(int));

This indeed did not solve the WRK performance issue like one commenter said, but it did the thing I asked about in the question.

I am now on the way to figure out the performance issue - namely by capturing WRK packets instead of a single Apache Bench packet I noticed what Nginx also does is use Connection: keep-alive to reuse the connection when there's many inbound connections, and that's what I believe now is the right course of action to optimize for many inbound connections including better WRK results.

During high load, the API returned an error response:

{"error":"API limit reached. Please try again later. Remaining Limit: 0"}

I hadn't accounted for these kinds of error responses in my deserialization logic, so the error message couldn’t be deserialized into my List<City> model.

When I replaced the API call with hardcoded JSON data, the deserialization worked fine, confirming that the issue was due to missing error handling for unexpected responses.

You should look into a state management library like Redux. With Redux you'll have a global state store that all of your components can pull from.

hi i can make appid and apphash for your telegram Account

Massage In Telegram @SeymourBirkhof

I fixed it by allocating a buffer in the target process and writing the structure to the buffer then changing the ProcessInformation argument to a pointer to the buffer and changing ProcessInformationLength to the size of the buffer

just run

npx npm-check-updates -u

to update all the packages first

and delete the unnecessary pacakges

I was overthinking it. We can constrain how much Spark is writing at once by simply constraining the resources we give Spark. If I set numPartitions to 500 but only give Spark a single 32-core worker, it will only write 32 partitions at a time, limiting how much we're hammering Oracle. Thus effectively "chunks" the job.

This issue has been fixed with Modus CLI 0.13.8. Please reinstall and try again. Thanks.

Git is a block chain in which successive data entries include the hash of the predecessor in the data such that the entire data set can be verified against data corruption by recomputing the hash codes of each successive entry and comparing the final hash code with the separately recorded latest hash code for the data set.

Other sequential data sets use this efficient consistency check, for example the Kafka log files do this.

In contrast, cryptocurrencies for example Bitcoin, use block chains whose hash codes are crypographically (slowly) calculated so that it is practically impossible to corrupt the data to arrive at a given hash code.

Git and Kafka use very efficient hash codes that do not have this anti-hacker feature. They only detect ordinary corruption from example missing, duplicated or garbled data as opposed to malicious data falsification.

"Blockchain" in common speech has the meaning of cryptographic block chain and that is why Git is not ordinarily considered to be a "Blockchain" despite it having data blocks whose verification is performed by chained (efficient non-cryptographic) hash functions.

A mapper function of the form,

def mapper(x): return [np.nan if np.isnan(y) else leader.loc[int(y), '1'] for y in x]

cols = ['3','4','5','6','7','8'] updated = DatasetLabel[cols].apply(mapper, axis=1) print(updated)

helps in getting around the quirk.

There is an extension for scikit-learn from Intel that speeds up some models, often very significantly.

Pandas assigns column name 0 by default when creating DataFrame from a list.

You can rename like:

df.rename(columns={0: 'Name'}, inplace=True)

in case anyone is looking for this as of 2024.
it seems like the new package is io.opentelemetry.instrumentation:opentelemetry-runtime-telemetry-java17:<version>

see: https://github.com/open-telemetry/opentelemetry-java-instrumentation/tree/main/instrumentation/runtime-telemetry/runtime-telemetry-java17/library

This was hugely frustrating for a few hours, then I remembered a trick that sometimes is useful. Frequently, I'll click sign-in links from apps(not just vscode) and absolutely nothing will happen.

What I do is completely close all instances of my browser(Chrome), and let the process re-open my tabs, and the new window it wants. That's what did it for me in this case. Thank goodness.

for deleting a branch using command line use these: 1.delete a branch locally

git branch -d branch_name

2.in order to force deletion (if branch hasn't merged)

git branch -D branch_name

3.in order to delete a remote branch

git push origin --delete branch_name

Based on my analysis on webpack code generation, few points to note are

1. A dependency which is not loaded eagerly by the host can be replaced with any other remote mfe with eager:true
2. A dependency which is not loaded eagerly by the host can be replaced with any other remote mfe with eager:false, if the unique name of the remote is greater than that of the host
3. A dependency which is loaded eagerly by the host can still be replaced with any other remote mfe with eager:true if its not been consumed yet.

At the end, in all the case its important to know that it doesnt matter which mfe's dependency is getting registered, important is that the dependency is provided when its needed to avoid any eager consumption error

So, in this case, you are right the longest unique app name wins

it gives me this error while trying to post reels with a python code:

Errore durante il caricamento del video: {"error":{"message":"An unexpected error has occurred. Please retry your request later.","type":"OAuthException","is_transient":true,"code":2,"fbtrace_id":"AZxk5ny-SJVm1CP3a36HTiu"}}

I found it, when using Everything, this version was in cache, so i deleted it.

As mentioned by @Yogi:

Changing transition-duration: 5s; to animation-duration: 5s; seems to work.

In general, transition-duration is used between two distinct states (start/end), while animation-duration involves a sequence of keyframes. When you're trying to trigger the animation on click, the use of animation-duration should be used.

Using double @ didn't work for me. Instead, I used an expression like this:

@{'@'}

It's a formula that returns an @ character.

Your example would look like this:

{
   "Username":"MyName",
   "Password":"@{'@'}mycode",
   "PrivateKey":"1234"
}

I was able to solve this issue by running:

sudo adb kill-server
sudo adb start-server

Now adb devices outputs the devices

System: Arch Linux

This can also work in application.properties:

spring.datasource.hikari.data-source-properties.allowLoadLocalInfile=true

For more Data Source properties (not particular to the engine): https://dev.mysql.com/doc/connector-j/en/connector-j-reference-configuration-properties.html

More info: https://mysqlconnector.net/troubleshooting/load-data-local-infile/#:~:text=To%20allow%20LOAD%20DATA%20LOCAL,connected%20to%20a%20trusted%20server.

I need the same solution for my database.

I m trying do do a loop in a table named "truck_technical_detail" until last record and for each record I want to take "gearboxes" data value (which is seperated by " - "), explode it and for each gearbox in it I want to check if it is already exixts in "truck_gearboxes" table. If it is not I want to add it and check next exploded gearbox value.

Could you please advice me a code by using mysql PDO.

    return MaterialApp(    
      debugShowCheckedModeBanner: false, // turn off debug banner
      title: 'My App',
      home: home,
    );

Did you ever sort this out? Having a similar issue with a video with alpha channel, render texture and URP Projector/Decal. Works in editor but not in build.

have you implemented fastlane? have you tried using the match action? I'm currently facing this issue and haven’t found any solution anywhere - fastlane match appstore throwing error "Could not create another Distribution certificate, reached the maximum number...."

Could you or @ko100v.d please help me resolving this?

I received this error due to Surface Book's sometimes not connecting to the GPU since the display and graphics card can be separated. Like other answers, this worked after I:

• restarted my computer to restart wsl
• right clicked my desktop and made sure I saw "NVidia Control Panel" as an option
• started a terminal as an administrator
• ran nvidia-smi in wsl

async rewrites() {
    return [
        {
            source: "/api/:path*",
            destination: "https://example-prod-url/api/:path*",
        },
    ];
},

I found this was in our next config. Which makes a lot of sense now why this was behaving the way it was.

in Swift 6.0:

func writeBytesFrom<T: BitwiseCopyable>(array: [T], documentName: String) -> Bool {
    return writeBytes(pointer: array, length: array.count * MemoryLayout<T>.stride, documentName: documentName)
}

For anyone else who ended up here with the same ... is bound to a different event loop error, but it's not related to FastAPI. Adding asyncio.new_event_loop() within the test fixed this for me.

e.g.

@pytest.mark.asyncio
async def test_my_func():
    asyncio.new_event_loop()
    ....

After looking around a bit in the Visual Studio UI, I found the right way to include the child project as a reference, but not actually copy files to the mother project.

I ended up setting Copy Local to No and Copy Local Satellite Assemblies to No. I'm not sure if I needed both of those set to No, but it seems to have done the trick.

This resulted in the following changes done to the csproj:

<ProjectReference Include="..\Child\Child.csproj">
  <Private>False</Private>
  <CopyLocalSatelliteAssemblies>False</CopyLocalSatelliteAssemblies>
</ProjectReference>

I still don't know what setting ReferenceOutputAssembly to false was supposed to do, but it wasn't what I wanted.

And second thing was the post-build event on the mother project:

echo Creating Target Directory: "$(ProjectDir)$(OutDir)Child"
mkdir "$(ProjectDir)$(OutDir)Child"
xcopy /y /e /i "..\Child\bin\$(Configuration)\$(TargetFramework)\$(RuntimeIdentifier)" "$(ProjectDir)$(OutDir)Child\"

The Problem was solved by editing the pom.xml build to the following code

 <build>
        <plugins>
            <plugin>
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-compiler-plugin</artifactId>
                <version>3.13.0</version>
                <configuration>
                    <source>17</source>
                    <target>17</target>
                    <annotationProcessorPaths>
                        <path>
                            <groupId>org.projectlombok</groupId>
                            <artifactId>lombok</artifactId>
                            <version>1.18.34</version>
                        </path>
                    </annotationProcessorPaths>
                </configuration>
            </plugin>
        </plugins>
    </build>

If its meant to be low resolution or pixilated in your case 96x96, try changing on the sprite in the inspector the filter mode to "point" and the compression to "none". Hope that helps

I know it's too late but I am also looking for the same thing. I found "react-material-ui-carousel" very helpful and it works as expected. Hope this help.

import { Grid2, Paper, Button } from "@mui/material";
import Carousel from "react-material-ui-carousel";
import banner_1 from "../assets/banner_1.jpg";
import banner_2 from "../assets/banner_2.jpg";
import banner_3 from "../assets/banner_3.jpg";

const MyCarousel = () => {
  const items = [
    {
      name: "Random Name #1",
      description: "Probably the most random thing you have ever seen!",
      bannerImage: banner_1,
    },
    {
      name: "Random Name #2",
      description: "Hello World!",
      bannerImage: banner_2,
    },
    {
      name: "Random Name #3",
      description: "Another banner here!",
      bannerImage: banner_3,
    },
  ];

  return (
    <Carousel autoPlay interval={2000} animation="slide" indicators={false}>
      {items.map((item, index) => (
        <Paper key={index} style={{ textAlign: "center", padding: "10px" }}>
          <img
            src={item.bannerImage}
            alt={item.name}
            style={{ width: "100%", height: "auto" }}
          />
        </Paper>
      ))}
    </Carousel>
  );
};

const Home = () => {
  return (
    <Grid2 container spacing={2} justifyContent="center">
      <Grid2 size={12}>
          <MyCarousel />
      </Grid2>
    </Grid2>
  );
};


export default Home;

Just enter this link with your app id

itms-apps://itunes.apple.com/app/idYOUR_APP_ID

Came across this exact issue, but for message attributes. Was able to isolate the issue to: If any the message attribute values contain a double quote character ("), the SNS event is always filtered out

Here's a response from AWS admitting that this is a bug in SNS. Unfortunately since this was 3 years ago I'm not sure if there's any more activity on this matter...

This is an engine bug (Bug #36492114) and was fixed in 8.4.3 with this commit https://github.com/mysql/mysql-server/commit/0f8002cf6ae.

Here are the release notes https://dev.mysql.com/doc/relnotes/mysql/8.4/en/news-8-4-3.html.

Seems that from webpack 4 to webpack 5, in order to get the DLLPlugin to work the same, entryOnly needs to be set to false. This seems to have fixed the issue for me.

I done several test and I removed hook from git. Now I'm able to commit my code on the repository :

$ echo "Test commit" > commit_message.txt
$ git commit -F commit_message.txt

Error: mkdir --path-format=absolute 
.git/info: no such file or directory

$ mv .git/hooks .git/hooks_backup
$ git commit -F commit_message.txt

[dev eb27e22] Test commit
 1 file changed, 1 insertion(+), 1 deletion(-)

Why does getting SSH working with git/Azure/Bitbucket always feel like such a dumpster fire?

Anyway this step from the official Bitbucket docs worked for me, I ran in Windows PowerShell:

git config --global core.sshCommand C:/Windows/System32/OpenSSH/ssh.exe

Apparently the video is out of date and the correct command to install it is:

pip install pretext

I'll havea go at helping.

A lot of the process is just validating inputs and escaping characters

• disallow special characters in inputs, the key characters being < and >

• you could escape certain special characters on submission < becomes & lt ; > & gt ;

• add a csp header so scripts from other origins cant just be injected

• avoid inline javascript all of this can be hijacked

• the same techniques should be applied on the backend

• frameworks like angular and react come with some built in functionality to help address this

Thats all there really is to this task, regular expressions and maintaining whitelists/blacklists of disallowed content.

Appreciating your only trying to solve the frontend, but it is most important to do this at the api and database level as anyone can just scrape the request and bypass any frontend form validations no matter how hard you go at it.

prehaps you're really trying to solve the issue with the site being blocked? in that case it'll be helpful to see the error reason?

You unnest the super array then do the comparison:

select * from tbl t, t.supcol.arrfield arrelm where arrelm::int=22

Turns out it is actually really simple, you load the model like this:

from unsloth import FastLanguageModel,

model, tokenizer = FastLanguageModel.from_pretrained(
    "/content/model"
)

A dictionary in python has some pre-requisites for it's keys, see: https://wiki.python.org/moin/DictionaryKeys

The solution is to convert the arguments from various types into hasheable type, like string.

have the same issue, Did you solve this problem…?

Seems like this has been already answered here: https://stackoverflow.com/a/45859483/28365102

On top of this you could then use the native js classList property, from where you first grab the element and then add/delete a class on the element as in a style class to hide and show the footer.

More info on it: https://developer.mozilla.org/en-US/docs/Web/API/Element/classList

Per Rafael Eyng's comment, this seems to have been a temporary issue with the API.

I dont think its possible to get the instrumentation callback address from usermode. I just got the address from kernel and stored it as a offset so I can use it in usermode.

Examples of "Real World Dense Graphs"

There is a research paper from 2006: "Just how dense are dense graphs in the real world? A methodological note"

"People participating to a same social activity, companies competing or collaborating in a given industrial sector, routers exchanging packets over the internet, or proteins involved in a given process of the living cell are examples of “networks” that can be modeled using graphs. They form a network because of the inter- actions taking place between the different actors: people, companies, routers or proteins."

https://www.researchgate.net/publication/220944957_Just_how_dense_are_dense_graphs_in_the_real_world_A_methodological_note

I think, you should define log() function before the custom handler class.

You can define it like this,

def log(mensagem):
    print(mensagem)

That should work, but you need to use the runApp button (source panel, top-right corner).

You appear to be using apollo-server v2 [which reached EOL (end of life) 10/2023] or v3 [EOL 10/2024]. Instead, you should be using Apollo v4. @apollo/server is the replacement for apollo-server, and @as-integrations/next is the replacement for apollo-server-micro.

See: https://www.npmjs.com/package/@as-integrations/next

import { ApolloServer } from '@apollo/server';
import { startServerAndCreateNextHandler } from '@as-integrations/next';

import resolvers from './logic/resolver.js'
import typeDefs from './logic/schemaGQL.js';

const server = new ApolloServer({
  resolvers,
  typeDefs,
});

export default startServerAndCreateNextHandler(server, {
  context,
});

Once you've got that in place, what errors are you getting from your server?

My god, I installed Power Automate Desktop half an hour ago and I hate it so much already:

• Had to google how on earth to switch languages because of course they think they know better what language you like so normal options aren't a thing
• Had to google this cause of COURSE they mess up such a basic thing as an HTTP request.

Anyway, cheers for this answer

This code create a new column with word having 'NN' post tag:

import pandas as pd
post = [[('word1', 'NN'), ('word2', 'VB'), ('word3', 'NN')],[('word4', 'JJ'), ('word5', 'NN')]]
df = pd.DataFrame({'TEXT':['text'],'POST':[post]})
df['WORDS_NN'] = df['POST'].map(lambda post_data : [p[0] for line in post_data for p in line if p[1]=='NN'])
df

Out of this, try to read about python spacy. its very usefull for NLP like Post tag filters

The better approach would be to use replayAsync.

const sound = await Audio.Sound.createAsync(filePath);
sound.replayAsync();

replayAsync

sklearn is based on urllib, so if you use the way to proxy used by urllib you solve the problem without downloading separately the docs.

Fix is change '@sentry/react-native/expo' to '@sentry/react-native'

Please check your language mode in right-bottom of vs code

If the selected language is not c/c++, please click that and select your language(C).

You can use my wrapper pip packege: https://pypi.org/project/textfromimage/

Hope this will help you :)

After reading a lot more I realised GTK, GTK+ and GTK# seem have some different components. I needed to specifically install GTK#, which I did with: sudo apt install gtk-sharp2 The test script now builds with mcs. Hopefully thats everything set-up and good to go

This answer worked for me: https://stackoverflow.com/a/55541435/3051080

TL;DR; update git cache:

git rm -r --cached .
git add --all .
git commit -a -m "Versioning untracked files"
git push origin master

Sorry, it will work.

adding "--pull never" in docker run command solved the issue

If you are generating stubs (abigen for Golang for example), check that the ABI used is the latest. I was getting Error: Transaction reverted without a reason string because of a mismatch between the real smart contract and the Golang stubs.

Ok, when I disabled Anti-aliasing using:

SubScene subScene = new SubScene(root3D, 1920, 1080, true, SceneAntialiasing.DISABLED);

If you use snprintf(...) in a task and end up in the hardFault_Handler, your stack size could be the problem. Increase it and try again.

For those who have also encountered this problem.

Android 11+ requires V2 Signing which can be done with apksigner (jarsigner only supports V1 Signing).

Another dummy scenario when this exact error is thrown is when the shader is not selected (or bound as some like to tell). So before digging into details, might worth checking the shader.

It finally worked...after changing value of "host" appribute of "jettyPort" element in jetty.xml, we need to restart the EC2 instance.

Did you find a resolution to this? i am facing the same issue my self here

Error while trying to alter CDC table on SQL Server

This is an engine bug (Bug #36492114) and was fixed in 8.4.3 with this commit. https://github.com/mysql/mysql-server/commit/0f8002cf6ae

Here are the release notes https://dev.mysql.com/doc/relnotes/mysql/8.4/en/news-8-4-3.html.

I'm not so sure, but the following might work:

...
@State private var myData = MyObservableObject()
...
VStack {
   //display stuff here
}
.task {
   myData.fetchStuff()
}
.onReceive(Just(myData.isReady)) { //<--- here
   if myData.isDoneFetching {
       formatUIData()
   }
}

cancel that... answer found here... How can I retrieve the P4 ROOT variable value in a Windows Batch file?

the problem was indeed, between my chair and my keyboard.

Encode your character string first to utf-8:

str = "éé Ñ".encode("utf-8")
with open("file.txt", "wb") as f:
f.write(b"Hello, World!\r\n")
f.write(str)

with open("file.txt", "r", encoding="utf-8") as f:
for i, line in enumerate():
print(i, line)

https://realpython.com/python-encodings-guide/