When there are multiple urls to an endpoint then linkTo uses the first one. In your case this is "/competitions/rounds/roundTypes" which does not have a variable called tenantId.

I would suggest you reorder the urls at your endpoint to put the second one first, as it includes all parameters.

So far, I am moving all async stuff in the component ( PageLayout ) in useEffect...

I would say, yes, there is a limit to how small Model Targets can be. But it all depends on your use case. Do users go close as part of the AR experience or are they meant to discover these objects by "scanning a room for objects"?

In the Vuforia documentation, it says

The cameras on a digital eyewear device, however, are located on the user's head. Therefore, targets need to be detectable and trackable from greater distances. Also, most devices have near field clipping planes, which will stop rendering if you move too close to a target.

Which means using eyewear, objects should generally be larger for Vuforia Engine to detect at larger distance, and being too close to the object will likely clip the rendering with the near field plane.

Another point is whether the objects carry sufficient detail. Are they complex enough to provide enough features for Vuforia Engine to detect it? This Best Practices guide has details on what makes a well-tracking object. It includes: geometric detail, rigid, CAD-model accuracy, texturing, etc.

associate_public_ip_address = true

Using version 8.0.39 worked for me.

The decision between a one-pointer search and a two-pointer search is based on the exact problem at hand, because both approaches have similar time and space complexities. A one-pointer search uses a single pointer or index to iterate through an array or data structure, with a time complexity of O(n) and a space complexity of O(1). This method works best for simple linear checks, such as locating a specific element or determining attributes like the sum or maximum value in an array. A two-pointer search, on the other hand, uses two pointers that usually start at opposite ends of an array and progress towards each other. This technique has a time complexity of O(n) and a space complexity of O(1). It is especially useful for tasks that require comparing elements from opposite ends, such as identifying pairs of numbers that satisfy a specified criteria, reversing arrays, or deleting duplicates from sorted arrays. Finally, neither algorithm is fundamentally superior in terms of time or space complexity, as both run efficiently with O(n) time and O(1) space. The best option depends on the nature of the problem: if comparing or coordinating components from different positions is required, the two-pointer method is preferable, whereas simpler linear traversals can be handled quickly by a one-pointer approach.

That change in WLS admin console worked for me. Thanks!!

This is what you need, I guess

type ColumnConfig<Row,Acc extends keyof Row = keyof Row> = {
  accessor: Acc;
  render: React.FC<{value: Row[Acc]}>;
}

const foo: ColumnConfig<{foo: 'bar'}> = {
  accessor: 'foo',
  render: ({value}) => <></> // Value type hint is 'bar'
}

to resolve this problem you muss use useParams() and use useEffect() if you want conection with API
const [user,setUser]=useState('');
let param=useParams();
param.id!=null ? useEffect(()=>{
getUserOne(param.id)
.then((res)=>setUser(res.data))enter code here
.catch(()=>console.log('there is wrong'));

Yes, you need to register Microsoft Entra App and then create Azure Bot resource; where you specify the messaging endpoint. For testing purposes you can use ngrok or devtunnels.

matched_species <- Data frame One %>% semi_join(Data frame Two, by = c("Site", "Species")) %>% count(Site)

matched_species

In visual studio code doesn't exist an option to do this... anyway, you can write a script which, when you save a file, checks the line amount, then delete lines which goes over the imposed limit.

For example, you can exstablish 20 lines limit. Then, everytime you save the file, your script checks the number of lines and, if they are more than 20, it delete all lines > 20.

In your code you reset searchStr to '', but you didn't reset query value. That is probably the issue

Try to convert this type of function:

Pass the category json:

$categoryIds = collect(json_decode($request->product_categories, true))->pluck('category_id');
$model->categories()->sync($categoryIds);

@Repository for persistence layer
@Service for service layers
@Controller for MVC controllers
@RestController for rest 

You should check the OS-ERROR function after the OS-... statements.

https://docs.progress.com/de-DE/bundle/abl-reference/page/OS-ERROR-function.html

if you use VITE for your react app then the variables must start with

VITE_API_KEY=your_api

fetch data via

const Api_Key = import.meta.env.VITE_API_KEY;

You can use id: disj Int to get a unique ID.

Permalink: https://play.formal-methods.net/?check=ALS&p=reflux-casino-dollar-vibes

Hi can someone better explain the screenshot please?? I don't understand how three input (f1,f2,f3) are elaborated in a single lstm cell. Thanks

Could you please provide more details about the situation where the text cannot be read?

1. Are you encountering an error? (If so, could you share the error message?)
2. Is there no error, but the output is incorrect?
3. Is there neither an error nor any output at all?

(I’m a beginner in STACKOVERFLOW, so I’m not yet able to leave comments. Therefore, I’ll write this in the Answer section instead.)

Click on the "Share" button in the upper right corner of the Colab notebook. Under "Get Link," change the access to "Anyone with the link" and select "Viewer." Copy the generated link. then you can share the copied link for others to access.

Beside all the recommendations (none of which resolved my issue), what fixed my issue is this:

• Check all your targets
• Include pod 'GoogleUtilities' in the targets which require it, but does not have GoogleUtilities in its pods list

This issue is started after I created a new target and occurs only when I try to archive a bundle to submit (not observed while running application in test devices or simulators). In this new target, I included only pod 'Firebase******' in its corresponding pods list, for which I thought this was enough. But it seems that those pods require GoogleUtilities and new target produces it itself and this causes duplicate frameworks. Even though I am not exactly sure and this may not be the reason, what I observed is also including pod 'GoogleUtilities' in the new target and this resolved my issue.

I don't know how to ask a follow up question, so instead I am typing in the answer section.

My question is,

I have used firebase realtime features for child added etc. but i didn't know about unsubscribing. What happens if i dont unsubscribe and i only listen?

According to their docs, it keeps both cookies in different jars. I find it counter-intuitive to have to programatically expire a cookie or rename it in order to implement this. Alternatively, disabling third-party cookie should keep the partitioned ones only, but haven't tried it yet. Source - https://developers.google.com/privacy-sandbox/cookies/chips-transition

As nVidia documentation and 2018 forum discussion say, the context memory overhead is dependent on the number of streaming multiprocessors (SMs) implemented on your CUDA device core, and there is sadly no known method to determine this behaviour. But it is only part of the answer. The actual overhead may dramatically depend on the host OS, as it was reported before for Windows in this answer. The answer is quite new (2021), so the issue may be still present in your setup. But as I see here, likely you have the strange threading model issue also described (but sadly not solved!) here.

As it is described here, the solution may be to run everything in the single host process. If it is not an option, it seems the best way to look at nVidia MPS, and here is an excellent answer about it: https://stackoverflow.com/a/34711344/9560245

I have the exactly same question. Did you solve your problem?

The sizeof(bmp_head) is 10 bytes instead 14 it should be. This caused due structure alignment.

This helps me: #pragma pack(2) // Pack structures by 2 bytes

Since .Net6 ReplaceLineEndings extensions method provides such ability.

string tmp = """
1
2
""";

Console.WiteLine(tmp.ReplaceLineEndings()); // replace line endings to  Environment.NewLine
Console.WiteLine(tmp.ReplaceLineEndings("<br/>")); // replace line endings to <br/>

Howdy from 14 years into the future! There are indeed purely functional schemes and lisps. BLisp, Otus Lisp, Carp and Lux, to name a few.

Please Re-write your app, Android Xamarin native not directly uprgaded to MAUI App.

Togglz distinguishes between enabled and activated features. You need to @EnabledByDefault the second feature too, and its active status will be dynamically interpreted by the Spring profile.

You can find an example an example with asyncio in the AWS documentation's code example repo.

Link: https://github.com/awsdocs/aws-doc-sdk-examples/blob/main/python/example_code/bedrock-runtime/models/anthropic_claude/converse_async.py

As suggested in this Stackoverflow Link by @Alex Mamo,

To check if the data is from cache or from Firestore servers, you can use the following line of code:

String source = querySnapshot.getMetadata().isFromCache() ? "Local Cache" : "Firebase >Server";

Also have a look at this Stackoverflow Link by @Frank Van Puffelen, To detect if the results came from the local cache vs which came straight from the server by checking the metadata.

Also take a look at this Document and Link which might be helpful.

the error "Unknown calling package name 'com.google.android.gms'." is likely caused by issues with Google apps. Here are some steps to troubleshoot the issue: * Restart your phone: This might be enough to fix the problem. * Reinstall Google apps: Uninstall Google apps like Google Play Services and Google Play Store, then reinstall them. * Clear cache and data: Clear the cache and data for Google Play Services and Google Play Store.

I have the same issue and I am trying to resolve. even after deleting the .m2 repository like you and making sure the local repository is configured correctly, the same issue persist.

I've PR'd the missing binding: https://github.com/RobotLocomotion/drake/pull/22116

This is likely due to Llama 3's requirement of a very specific prompt format, which is described in the Meta Llama 3 documentation at https://www.llama.com/docs/model-cards-and-prompt-formats/meta-llama-3

In the version 4.0.0 of Google Places there is a Pharmacy type, you probably need to update your library version.

 public static final String PHARMACY = "pharmacy";

Can you please edit the question and add the code where you want to add this new menu?

you should refactor your BetaData object to string and in your DbContext's OnModelCreating method define that is a jsonb type

Same issue: RuntimeError: Failed to import transformers.models.clip.modeling_clip because of the following error (look up to see its traceback): No module named 'flash_attn_2_cuda'

When running from_pretrained models. After an update in transformers package it broke. Using model phi-3.5-vision-instruct

Thank you, This is working. Facing issue with one more spec similar for converting JSON to Array.

Input JSON:

[
  {
    "bI": {
      "id": "t1",
      "locale": [
        "id_ID",
        "id_ID"
      ],
      "tempName": "",
      "name": "Test1",
      "isActive": false,
      "pT": "Re"
    },
    "id": "t1",
    "ContextID": "id_ID",
    "cf": {
      "name": "asd"
    },
    "dE": {
      "sS": "arte"
    },
    "mk": {},
    "pd": {}
  }
]

spec applied:

[
  {
    "operation": "shift",
    "spec": {
      "*": {
        "*": "&",
        "bI": {
          "*": "bI.&",
          "tempName": {
            "": "&2.&1",
            "*": {
              "@1": "&3.&2"
            }
          }
        }
      }
    }
  }
]

O/p:

{
  "bI" : {
    "id" : "t1",
    "locale" : [ "id_ID", "id_ID" ],
    "tempName" : null,
    "name" : "Test1",
    "isActive" : false,
    "pT" : "Re"
  },
  "id" : "t1",
  "ContextID" : "id_ID",
  "cf" : {
    "name" : "asd"
  },
  "dE" : {
    "sS" : "arte"
  },
  "mk" : { },
  "pd" : { }
}

Expected output:

[
{
  "bI" : {
    "id" : "t1",
    "locale" : [ "id_ID", "id_ID" ],
    "tempName" : null,
    "name" : "Test1",
    "isActive" : false,
    "pT" : "Re"
  },
  "id" : "t1",
  "ContextID" : "id_ID",
  "cf" : {
    "name" : "asd"
  },
  "dE" : {
    "sS" : "arte"
  },
  "mk" : { },
  "pd" : { }
}
]

The match method can be used in JavaScript.

function findCharIndex() {
    haystack = "this is a string" 
    needle = "a" // "is","string"
    let matchWord = haystack.match(needle);
    if(!matchWord){
        return -1;
    }
    return matchWord.index;
};

console.log(findCharIndex());

you might want to remove this from your onCreate EdgeToEdge.enable(this);

You can try out Middleware for sure, you can get all the data i.e. metrics,logs and traces by just installing the agent in your java app.

Thanks for the replies guys, it's a little late to post the answer but whta worked for me to emit the success state in this case was to remove the bloc state class and event class from extending to the Equatable class.

To save a model, you can have a look at this article that uses pickling to do this. In that way, you can load the original fitted model and use the methods such as .predict(). This approach allows you to work with it the same way as you would expect without saving it in between.

Guys, I am getting this error. I have checked multiple times what went wrong in my code but didn't find yet. As someone explain need to visit particular URL then ? I don't understand that thing. Please someone explain that. I really appreciate that.

Check This Image

Let us first consider what happens when function overloading is specified. The compiler will search for an ambigous call during compilation so we straight off the bat can eliminate run time errors and strictly adhere is dry semantics at this point. The compiler will only complain about an ambigous call when performing parameter matching in overloaded functions. During function overloading the compiler will generate candidate functions to form a candidate set. The candidate set is generated following function loading semantics, in which the function parameters are sequentially checked and the infered/implied function parameters also follow likewise analysis. At this point if the function parameter types are cast to another type or decay (a cast in which the parameter type decays in value) to another type according to parameter selection semantics. The overlap in the stated overload functions in the candidate set will not cause the compiler to throw an ambiguous call warning. The function overload selection will defer to the overload which requires the least overhead in execution. In essence the pointer overload is prefered as it ranks higher in the priority ranking list, (the pointer type is not a user defined type). I've tried to go into some amout on details about the semantics the compiler goes threough when it ranks priority. Hope this hhelps.

If you want to specify the colours of the column annotations in your heatmap you can define a colour palette for the gene_functionannotations and then pass this information into pheatmap. A suggestion on how you could update your code:

Create a color palette for every unique function in gene_function

Make a list of annotation_colors and set it to annotation_colors in pheatmap.

Is a commented line (i.e. #....) counted as an empty line or not counted at all? (since there is a difference between blocks of data separated by a single empty line or 2 (or more) empty lines, this is important).

After much trial and error this worked in my scenario, adding both the telephone number e.g. 8989, and the transformed extension 8*989 as a separate extension.

<Extensions>
    <Extension>
        <xsl:value-of select="telephonenumber"/>
    </Extension>
    <Extension>
        <xsl:value-of select="concat((substring(telephonenumber,1,1)),'*',(substring(telephonenumber,2,3)))"/>
    </Extension>
</Extensions>

Because when using pivot_wider, half is used as a key_variable. Afterwards, pivot_longer takes the first column in the pivot_wider result as the first column and the first row as the second column. You can make it work symmetrically by changing the code as follows.

https://docs.aws.amazon.com/translate/latest/APIReference/API_ListLanguages.html

I use it (inside a function) like

    try:
        log.info("Fetching languages from AWS Translate")
        client = translator_client_aws
        response = client.list_languages(DisplayLanguageCode="en")
        return response["Languages"]
    except (BotoCoreError, ClientError) as error:
        msg = f"An error occurred: {error}"
        log.error(msg)
        raise

Which returns something like

{
│   'Languages': [
│   │   {
│   │   │   'LanguageName': 'Afrikaans',
│   │   │   'LanguageCode': 'af'
│   │   },
│   │   {
│   │   │   'LanguageName': 'Albanian',
│   │   │   'LanguageCode': 'sq'
│   │   },
│   │   {
│   │   │   'LanguageName': 'Amharic',
│   │   │   'LanguageCode': 'am'
│   │   },
│   │   {'LanguageName': 'Arabic', 'LanguageCode': 'ar'},
│   │   {
│   │   │   'LanguageName': 'Armenian',
│   │   │   'LanguageCode': 'hy'
│   │   },
...

As you can see in https://docs.aws.amazon.com/translate/latest/dg/what-is-languages.html

it says Amazon Translate supports text translation between the languages listed in the following table.

In other words, they use target_languages as source_languages as well.

I tested it with the examples below to make sure it works.

Note: translate_text_aws is my own wrapper (not public), but you get the idea.

t="Tengo jugo de manzana."
translate_text_aws(text=t,source="es-mx",target="es") # To Spanish (Spain)

# 'Tengo zumo de manzana.'

t="Tengo zumo de pera."
translate_text_aws(text=t,source="es",target="es-mx") # To Spanish (Mexico)

# 'Tengo jugo de pera.'

Just now I was facing the same issue, but I'm not loading any image, I'm taking snapshots of Nodes. So, I wanted to expand on the @jewelsea answer with my workaround specifically for this use case:

// Get the screen on which the node is displayed
public Screen getScreenFor(Node node) {
    Bounds bounds = node.localToScreen(node.getLayoutBounds());
    Rectangle2D toRect = new Rectangle2D(bounds.getMinX(), bounds.getMinY(), bounds.getWidth(), bounds.getHeight());
    return Screen.getScreens().stream()
        .filter(screen -> screen.getBounds().contains(toRect))
        .findFirst()
        .orElse(null);
}

// Node that w and h can be retrieved directly from Node, but I needed them because they may not match in my case
public WriteableImage snapshot(Node node, double w, double h, SnapshotParameters parameters) {
    Screen screen = getScreenFor(node);
    // Use this workaround only for HiDPI screens
    if (screen.getOutputScaleX() != 1.0) {
        double scale = screen.getOutputScaleX();
        int scaledW = (int) (w * scale);
        int scaledH = (int) (h * scale);
        WriteableImage snapshot = new WriteableImage(scaledW, scaledH);
        parameters.setTransform(Transform.scale(scale, scale));
        node.snapshot(parameters, snapshot);
        return snapshot;
    }
    return node.snapshot(parameters, null);
}

Edit: just a little rant, I'm quite tired of dwelling with JavaFX bs! Hope this could save someone a headache

I am using "react-native-google-places-autocomplete": "^2.5.6"

Run npm install --save react-native-get-random-values

Then simple go to your project index file and import below line on yop of your function.

import 'react-native-get-random-values'

run npm start and it is working for both android and IOS

You should share some code, may be your path is incorrect. Secondly, try to use In page CSS to ensure about your classes.

Thank you very much, I've tried some things and indeed, adding "-O3" flag for optimization, lowered calculation time from around 3.4s per matrix to 0.02s per matrix - I've never seen such great change with that flag, so never bothered to use it since it makes debugging harder as I heard. Ni the end, with -O3 code is around twice as fast as python code, so exactly what I was counting on. Thank you!

I’m not sure about the exact cause, but in my experience, when hooks don’t work properly, rebuilding the environment has sometimes resolved the issue. Additionally, I will try setting up a minimal virtual environment to see if that helps. It might be worth trying.

If you pass the htmlContent string when sending a template email, avoid using the quotes when defining the href URL.

Example:

<a href=https://stackoverflow.com> stackoverflow </a>

We had a successfully deploying pipeline using Azure Connection Type Azure Classic which we started getting this error on ("The storage account 'xxxxx' was not found"). It was resolved by changing the Connection Type to Azure Resource Manager.

Follow https://github.com/google/gvisor/issues/10997 for all answers. I got it working.

You have two options:

Switch to the nightly toolchain in the terminal globally:

rustup default nightly

After switching the toolchain, don't forget to reload the project model

Or override it using rust-toolchain file in your project.

Its related to permissions, if you are using linux,you can write in terminal:

sudo chmod 777 -r {directory-address}

At glance, code signing basically is about to ensure that the executable I got in my computer as a potential user of the application, has not known any kind of code alteration in between. To do that, (since we are talking of windows) windows OS need to be able to make some verification. Firstly it will go look for local certificates (active directory) and then at Microsoft Code Signing certificate store. So the choices are :

• 1. If you are willing to publish your application in the Microsoft Store you'll need a Microsoft Code Signing certificate
• 2. If the application is used internally, you can make your own Self-signed certificate and tell your local win OS about it, see a
     tutorial : https://www.youtube.com/watch?v=zqd80Yp9ZSc
• 3. Otherwise, if you want to publish your app but not necessary by Microsoft Store, there are many of Certificate Authorities that may help.

I may suggest to use option 2 in order to test without betting money as it has been said. Then option 1 or 3 as needed.

FYI, when configuring app installer to allow elevation, windows defender will be okay with that without a certificate.

Application.Caller throws an error 2023 in Excel 2007. There doesn't seem to be access to the button (shape) text in 2007. Only .Name

Yes, sometimes you have to deal with legacy apps. IME Microsoft isn't "always" compatible with Microsoft (2007 cf any newer versions), and the errors can be very subtle, and your customers find them! Especially with 20 year-old s/w.

Step 1: download the jdk (https://jdk.java.net/archive/) Step 2: Creat a new folder called "Java" in C://Program Files Step 3: Unzip your jdk.zip, and put the folder called jdkxxx into Java folder Step 4: Add the path "C://Program Files//Java" into your environment variable path

Then it willl work.

Is AppComponent an standalone component? If yes, your beforeEach block should not declare the component, but rather just import it:

await TestBed.configureTestingModule({
  imports: [
    AppComponent
  ],
}).compileComponents();

Please share the code of your AppComponent.

Flaresolverr don’t work after October 2024 changes in flare challenge … Try https://github.com/yoori/flare-bypasser it is more stable, because don’t use driver (interact with chrome with using nodriver CDP) and don’t use shadow-root processing specific features (use image processing for find challenge position)

The course material had an example of a system for a shop and its shopping cart module. Earlier, we've also created Person and Customer objects. Create a customer registry module for the shop, in which customer information can be saved to and fetched from.

The module's functions should be as follows:

add(firstname, lastname). An ID is automatically created for each customer, starting from 0 and counting up.

customerInfo(id). Find a customer based on their ID, and print their name. This can use the name method inherited from the Person object. If the specified ID doesn't exist - in other words, that many customers have not yet been added - print "Too high an ID value!" instead.

customerList(). Print all the customer information in the form of [ID]: [Last name] [First name].

Example output: Too high an ID value! Added customer with ID 0 Added customer with ID 1 Listing all customers: 0: Programmer Pete 1: Coder Cara Added customer with ID 2 Added customer with ID 3 Listing all customers: 0: Programmer Pete 1: Coder Cara 2: Scripter Samuel 3: Webmaster Wendy

For DBeaver Users:

Connection Settings -> Driver Properties -> Advanced driver Properties (At Bottom) ApplicationIntent=ReadOnly

https://stackoverflow.com/a/79155142/4107038

I think this is your answer here.

But it seems that this is allowed by the Standard, because moving a size-K vector doesn't move any of its elements, and the "complexity requirements" are "stated solely in terms of the number of operations" on the contained int objects.

I disagree with a part of the above statement. Moving a vector does move its elements.

All of the complexity requirements in this Clause are stated solely in terms of the number of operations on the contained objects. [ Example: The copy constructor of type vector<vector> has linear complexity, even though the complexity of copying each contained vector is itself linear. — end example ]

I interpret this as just saying we cannot blame the container for how difficult it is to move its elements. The type of an element is in the control of the user.

So the copy constructor of type vector<BlackBox> has linear time, even though a BlackBox element could take an unbounded amount of time to be created/moved/copied.

To give a silly example, what if the copy constructor, or the move constructor of BlackBox wants to solve the P versus NP problem before completing its execution. This time should not count towards the time complexity of the vector.

Correct Answer: Event: Change Selection Type: item Item(s) : P1_ITEM

True Action: Execute Javascript Code:

if ($v("P1_CONDION_ITEM") == 1) {
    $("label[for=P1_ITEM] ").text("Sale Amt");
} else if ($v("P1_CONDION_ITEM") == 2) {
    $("label[for=P1_ITEM]").text("Credit Amt");
}

For DBeaver Users:

For Copy Paste: ApplicationIntent ReadOnly

Please sir could help me develop my personal website ,I am a beginner in python programming now entering the intermediate level please.

From what I read in the comments, I just need to remove

del caller

and let python manage the memory with the garbage collector

I have exactly the same problem. Have you been able to find a solution?

Thanks in advance.

this is the proper place for Rails 7.2:

lib/templates/test_unit/scaffold/functional_test.rb.tt

Not really sure what you mean, if it's visual feedback or callback. But you can use on_focus property to call your virtual keyboard.

A wrapper around james-heinrich/getid3 to extract various information from media files.

Try this package

getid3-laravel

While WildFly 34 is a compatible implementation of the EE 10 Platform as well as the Web Profile and the Core Profile and thus using jakarta.* namespace, the JSR107 has never been updated since 2017 and thus cannot possibly be compatible with Jakarta EE. That's also one of the reasons why JSR107 is not bundled with the WildFly distributions while other Infinispan modules are available.

No, you have to place .github/ISSUE_TEMPLATE to let them work (ref).

Although you can format the crated issue using GitHub Action workflow that is triggered by "issue opened" event, but I think it won't fulfill your needs if you are expecting "issue template" function.

Struggled with this too, but found a solution that works for me. Just change the code to: {cerebro.run() cerebro.plot(iplot=False)} and make sure the Spyder graphics backend is on 'automatic'.

0

I started getting this error lately and i'm not sure why. Nothing new has changed and I could really use some help

Wondering whether this is what you want:

• lookup and store values in values
• for each cell in M5:M500 get the sum by multiplying
  • 0 if hidden SUBTOTAL(103, m)
  • match words
  • values

This requires Excel for Microsoft 365. Please let me know if you're on an older version.

=LET(
    words, {"KE", "BF", "LF", "SOP", "ME", "ME+", "PS"},
    values, HLOOKUP(
        "Analytics Data",
        SIZING!$A$1:$D$8,
        MATCH({"KE", "BF", "LF", "SOP", "ME", "ME+", "PS"}, SIZING!$A$1:$A$8, 0),
        FALSE
    ),
    SUM(MAP(M5:M500, LAMBDA(m, SUM(SUBTOTAL(103, m) * (m = words) * values))))
)

I find the answer posted a little confusing.

I feel we should be invoking svnadmin create on a per project basis and we should not be importing different projects into one repository.

svnadmin create <my-repo> creates one svn repository.

From the help I quote:

    $ svnadmin create --help
    
    create: usage: svnadmin create REPOS_PATH
    
    Create a new, empty repository at REPOS_PATH.

Hence we should be doing:

svnadmin create /myrailsproject

Import Your Project:

(Assuming you’ve put your project files in /projects/myrailsproject)

svn import /projects/myrailsproject file:///myrailsproject

This is how we would checkout:

svn co svn://192.168.0.2/myrailsproject

I do not think that we should be putting different projects in the same repository.

If we need a top level folder /svnrepos/ then we should create that first. And then the sub projects.

In that case we would check out like this:

svn co svn://192.168.0.2/svnrepos/myrailsproject

Am I mistaken?

Reviving an old question here, but I am experiencing the same issue in a Citrix environment myself. EnumerateDevices is returning different device IDs when logging in and out of a Citrix session, even though the local devices don't change at all. The output on this page proves to me this is what is happening.

https://jsfiddle.net/jib1/2r6z6ouc

var stream;
navigator.mediaDevices.getUserMedia({ audio:true })
.then(s => (stream = s), e => console.log(e.message))
.then(() => navigator.mediaDevices.enumerateDevices())
.then(devices => {
  console.log(JSON.stringify(devices));
})
.catch(e => console.log(e));

var console = { log: msg => div.innerHTML += msg + "<br>" };

My problem is, this is only seemingly happening inside Citrix, and i am certain i am storing all chrome data, profile an cache files back to the users profile between sessions, including cookies etc. We are not clearing anything. So Citrix somehow is to blame for these device IDs being re-generated on each login.

Does anyone know of a solution to this, as i have a softphone that will not remember the users device selections and i'm told by the developers that it is because the DeviceIDs are changing on log off/in.

thank you to anyone who can shed any light on this

Maybe like this? And it is easy to read.

[Fact]
    public async Task MyTest()
    {
        await new TestScheduler().WithAsync(async scheduler =>
        {
            // Arrange
            var sut = new MyTestClass();
            var observer = scheduler.CreateObserver<bool>();
            sut.EnableLaser.CanExecute.Subscribe(observer);

            // Act
            sut.EnableLaser.Execute().Subscribe();

            // Assert
            observer.Messages.Should().HaveCount(2);
            observer.Messages.First().Value.Value.Should().BeTrue();
            observer.Messages.Last().Value.Value.Should().BeFalse();
        });
    }

I have removed the libwkhtmltox library and installed HtmlToPdfConverter.Core, which resolved my problem.

Unfortunately, I am not able to reproduce this issue. Would be helpful to know which framework you're using (I tried .Net6 and it works in my code)

I suggest that you try one of the following:

• set the brushes to static resources like "Red", "Green" and "Blue" (instead of DynamicResource) and see if this works. It might be a resource binding problem.
• change "IsPressed" to "ButtonBase.IsPressed"
• As a rule of thumb, I usually do not make any assumptions about the sequence of trigger events. In your control template, both IsMouseOver and IsPressed influence the Background brush property of "Border". You might try to add a second border to your grid right on top of the previous one, with a Background property set to either {x:null} or "Transparent" by default. Then use the "IsPressed" trigger to change the background of this second border.

Maybe this new R package can be a solution to your question? https://www.sciencedirect.com/science/article/pii/S2468265924000854

Lai J, Tang J, Li T, Zhang A, Mao L (2024) Evaluating the relative importance of predictors in Generalized Additive Models using the gam.hp R package. Plant Diversity, 46, 542-546.

Often it's a minor thing and in that case I missed to add filter("/*").through(PersistFilter.class); to my Module extending ServletModule. I use guice-persist that's why PersistService and PersistFilter is in use and PersistFilter starting the UnitOfWork. Thank you both for your valuable input.

I believe exploring ScheduledExecutorService will be worth here.

quickest way, command+click to class, it will show the source class code.

Extra tips:

• if it is flutter sdk class, you can find more information on https://docs.flutter.dev/
• if it is third party library, you can find its source on https://pub.dev/ also some libraries has its own websites with documentation.

Enter Settings on terminal (swipe from left edge).

Go to 'Generate Pairing Code'.

That's the code you need.

It's a three word phrase

NewType() accepts an unique type parameter. To specialize the function for different types for static typing, you only need a TypeVar here.

Example: Read https://dev.to/decorator_factory/typevars-explained-hmo

ok i was facing this issue and also i read about all other things on internet but none of them worked for me and by just tweaking here and there i got on the feature where we can restore editors from previous sessions , to check i turned it off and now code opens very fast like previously it was taking 8 to 12 seconds and giving end process dialog but now it works smoothly and very responsively, i dont know how i opened it but it solved my problem,just see the picture below and add following settings also if you can try to clear previous history

This is controlled in Windows International settings. Press the windows key and type intl.cpl and press Enter. Then click "Additional settings" and set your digit grouping options there. Excel should use those.

turns out that the problem was that i opened files from DOS/Windows origin which contains the character ^M at the end of the line , the windows version of fread ignores it , but the linux version doesn't leading to this problem