Here the error means it cannot parse the json data sent through the body of the request, to handle this you need to add a line to help the server parse the data.

app.use(express.json());

can you show me how are you dealing with this exactly? I am at a similar point but can't get past it... thanks Dario

Answering my own question in case someone else has the same problem in the future:

In the code provided, even though we extend the IUserStore to IEmailUserStore when mocking, we still need to manually set the boolean value that enables email support for DefaultUI in _userManagerMock before passing it as a parameter to _signInManager:

_ = _userManagerMock.Setup(x => x.SupportsUserEmail)
    .Returns(true);

OHIO GYAT MY SKBIDI MAX AURA GAY SIGMA

It seems like there was an interruption while loading the files. can you retry by connecting to different network. This might solve your issue. After connecting to the another network retry using the command

pip install git+https://github.com/ageitgey/face_recognition_models

Thanks to @collimarco, it is indeed a Safari bug. Upgrading to Safari beta (can't upgrade to Sequoia at the time) fixed the issue.

Use the gr.HTML() component:

with gr.Blocks() as demo:
    title = gr.HTML("<h1>Dataset Explorer</h1>")
    ...

The Open debug launch profiles UI link has to be clicked:

Then, A new Executable profile has to be created to be able to access the configuration for Path to the executable to run. Make sure to delete the previous outdated profile.

Also this works:

not, environment:, and not an array but an object.

      "env": {
        "PORT": "8080",
        "RUST_BACKTRACE": "1"
      },

I have that same problem and i decide make solution adding scroll to calendar

    ::ng-deep .p-datepicker {
    position: absolute;
    top: 100%;
    left: 0;
    z-index: 9999;
    font-size: 0.8rem;
    height : 200px;
    
    // does scrollable
    max-height: 300px; // adjust this value maybe your needs
    overflow-y: auto;
    
    // Opcional: for a scrollbar
    &::-webkit-scrollbar {
      width: 8px;
    }
    
    &::-webkit-scrollbar-track {
      background: #f1f1f1;
      border-radius: 4px;
    }
    
    &::-webkit-scrollbar-thumb {
      background: #888;
      border-radius: 4px;
      
      &:hover {
        background: #555;
      }
    }
  }

Have a good day! and i've hope to help you.

The testCase attempts to push the following : 0, 1, 0.

You only push a new value on the stack, if the current value at the top of the stack is > the value you are trying to push. So your min stack will take 0, skip 1 and again skip 0.

After 3 pushes: stack = [0, 1, 0], minStack = [0]

getMin = minStack.peek = 0

Then you do a pop. So stack = [0, 1], minStack = []

Now getMin = minStack.peek() = not possible because stack is empty.

Your code doesn't account for what happens when there are multiple instances of the same min.

I have the same problem. Gauge chart just loading whent put together with any of the other charts

In your Project, go to the Target (esp. you App) and set the team to "None".

Or turn off "Automatically Manage Signing".

But keep in mind, Xcode does a lot of signing and provisioning in the course of a normal project life cycle. Let me put it this way, I haven't seen Apple try to write a document about how to manually handle all the tasks Xcode is doing.

Have you checked the docs?? Do look here once....

https://www.blocknotejs.org/docs/advanced/real-time-collaboration

In my case sign-in worked only when I run the app on my phone by Android Studio, but if I downloaded the app from Google Play - I got that error. To solve it you need to create one more Android OAuth-client on Google Cloud Console with SHA-1 from Play Console (not from gradle signingReport).

I think the most concise way I found is to use @Jonathan Feenstra suggestion with some destructuring:

if let Some((_, [_, name, company])) =
    pattern1.captures(&text).map(|capture| capture.extract()) {
        do_something_with(name, company);
    }
    else if pattern2.is_match(&text) {
        do_something_else();
    }
}

This issue arrived because the navbar and mobile component both have z-index of 50, so they are blocking each other. So that my icon is not responding after mobile component display.

I used a function to allow certain html tags to be kept, as above - then wondered how to make sure that all html tags are completed when the wordcount runs out. I got some code working, but its just a prototype - It builds a DOM tree of the HTML, and walks it until it run out of wordcount, then deletes all siblings from then on. Does this make sense or is it too flaky?

    function truncate_by_element(
    string $input,
    int $num_words,
    string $more
) {
    $dom = new DOMdocument();
    @$dom->loadHTML($input, LIBXML_HTML_NOIMPLIED | LIBXML_HTML_NODEFDTD);
    if ($num_words > 0) {
        trimDOMNodes($dom, $num_words);
    }
    $output = $dom->saveHTML();
    $output .= $more;
    return $output;
}

function trimDOMNodes(
    DOMNode $domNode,
    int $num_words_left,
): int {
    foreach ($domNode->childNodes as $node) {
        if ($num_words_left <= 0) {
            // we ran out of space, clear all future siblings
            while (null != $node) {
                $parent = $node->parentNode;
                $delete_item = $node;
                $node = $node->nextSibling;
                if (null != $parent) {
                    $parent->removeChild($delete_item);
                }
            }
            return $num_words_left;
        }
        if ($node->nodeName == '#text') {
            $num_words_left -= word_count($node->nodeValue);
        }
        if ($node->hasChildNodes()) {
            $num_words_left = trimDOMNodes($node, $num_words_left);
        }
    }
    return $num_words_left;
}

function word_count(string $text)
{
    return str_word_count($text);
}

Sorry to wake up an old question...
Since opencv/emgu doesn't expose the pixel conversion functions, sometimes I use this:

Bgr bgrColor = new Bgr(...);
Hsv hsvColor = new Image<Bgr, byte>(1, 1, bgrColor).Convert<Hsv, byte>()[0, 0];

This is not optimized at all, but will give the correct color.

A Better and Simple Solution

Assume you have a parent object for your drag_canvas called chess_table, no matter it is a Canvas or Toplevel, just do this:

drag_canvas.config(bg=chess_table["bg"])

Done... That's it.

what versions of tokenizers lib are you using? Because I am having the same problem, but wasn't able to make it work :/

The Cymric library can handle this in a cross-platform manner.

https://github.com/catid/cymric

In case this helps someone. I am running python 3.10.15 on my conda environment and default pip install pywin32 was giving me the DLL error, tried other solutions on this thread didn't work either.

Upgrading pywin32 worked pip install --upgrade pywin32==308

As of 11/10/2024

Fatal error: Uncaught exception 'MongoConnectionException' with message 'Failed to connect to: localhost:27017: Connection refused' in /data/webs.garzantilinguistica.it/include/class.SearchImplementation.php:65 Stack trace: #0 /data/webs.garzantilinguistica.it/include/class.SearchImplementation.php(65): MongoClient->__construct() #1 /data/webs.garzantilinguistica.it/ebooks/index.php(43): SearchImplementation->__construct() #2 {main} thrown in /data/webs.garzantilinguistica.it/include/class.SearchImplementation.php on line 65

I am encountering an absurd situation when using Oracle Apex. When I log into my apllication, select a page from the list of pages and click the Play button (save and run page) I get a normal output in a new tab showing me the page.

The problem starts when I decide to change the page or any of the pages from the list. After making a change I am unable to save it. I get a message: Your session has ended. If I want to save the change I have to reload the page, log into Apex again, select the desired page and make the change.

It is totally weird, because before today this did not happen and Apex was able to save changes and run the page without having to log into again.

I tried to configure session timeout or google this, but nothing helped. I will appreciate every suggestion.

The error might be in the href tag. If you simply write '/login' it means a folder but if you write '/login.(extension name)' then it might work.

You need to set 3. parameter of LinearLayoutManager false

module top_module( input [2:0] vec, output [2:0] outy, output out0, output out1, output out2 );

assign outy = vec;
assign out0 = vec[0];
assign out1 = vec[1];
assign out2 = vec[2];

endmodule

While this question was asked a long time ago, I'll provide an answer as it might still be relevant to others.

Use select(ModelA) with 'with_only_colums(*columns)'.

You can try this also to lazy load the count.

pip install django-lazy-admin-pagination

The solution to use the option "Enable single logon" works great. Can the same be achieved on Linux without a UI?

Your solution of encrypting the credentials and storing the key in Windows Environment Variables can work, but it has some limitations in terms of flexibility and scalability. Given your client's need for security and configurability, a tool like HashiCorp Vault might be a better fit.

Not sure if you got the answer already, you should select text not visual in the editor.

The issue you encountered with installing bash earlier was because bash is already included in the macOS kernel. You could have switched to it using the chsh command, which stands for ‘Change Shell’ (the default shell on macOS now is zsh, and it’s quite good!). I recommend trying to install bash again using the commands you mentioned. It should work this time.

I guess, the simplest way is to do the following

class ProductBlockPlugin(CMSPluginBase):
    autocomplete_fields = ['product']
    ...

Django CMS plugins do not register their own ModelAdmin, since they already are a subclass of ModelAdmin and already have the autocomplete functionality built-in.

In my case I had this issue when trying to pass a callback in a call to postMessage:

window.postMessage({cb: () => null})

I did not know that this is not possible. The error message was not very helpful.

I have the "same"problem. I upload my picture, but diferents days and not recognize me.
The software give another hash to my face. There are any discord server about face-api-js ???

marker.position = { lat: 40.7128, lng: -74.0060 };

Use this in the new advanced marker

I have found one way and used in one project and its working well. here is link https://medium.com/@codingank/building-a-seamless-multi-step-signup-and-persistent-sign-in-flow-in-react-26a89db68b7a

Please share your full code for clarification with the image link.

I'm new in this blog discussion. I write because I have a very big lake in the lstm architecture made with keras. I don't understand how in a time series the first time step including look-back scalar values (extract from the dataset) can be passed to the first lstm unit that can accept only one scalar input. Is there a weighted sum before in the input kayer? Thanks

I wouldn't recomend, but I use this extension for my purpose. I didnt find any alternative way to solve this problem without removing the links all together. https://chromewebstore.google.com/detail/hide-link-preview-in-goog/mhkciofjljfadebnghpccobljpbaagee

Cheers !

list1=list(x for x in input("Enter elements for list separated by space").split(' '))

Make sure your file is in the project directory at the first level. Not in src, class, etc. but just straight in the project directory.

You should debug at RegisterSessionAuthenticationStrategy to check what really happens

You are loggin with a single account, but the external authz server knows nothing about controlling concurrent session in your service. It return you two different Authentication objects.

If possible, Try to implement you own Authentication and override hashCode and equals.

It is 2024 and this seems to be the one thing that is working:

https://www.linkedin.com/feed/?shareActive=true&text={ url }

i am facing the exact same issue if you found in solution please do share to resolve the issue.

userSchema.pre("save", async function(next){ if(!this.isModified("password")) return next(); this.password = await bcrypt.hash(this.password,10); })

You can use this api to get your blogger stats

[Your Blogger URL]/feeds/comments/default?alt=json-in-script&callback=webStats

Despite the doc saying it is supported, the NotificationCompat class so far does not. See this Google issue

Yes, you can control media playback from the browser console using JavaScript, much like how you would control media elements on a webpage. Here’s how you can interact with HTML media elements (like or ) using JavaScript in the console

Had the same issue after cloning my Flutter app for git. In order to resolve I had to open VS Code as admin. Saw that I had an outdated Dart SDK version and had to run flutter upgrade. Hope it helps :)

This error indicates that your Spark installation is missing the Hive and Hive-ThriftServer components, essential for starting the HiveServer2 service. This service allows remote clients to interact with a Spark SQL engine.

Try Building Spark with Hive and Hive-ThriftServer:

For Source Builds: If you're building Spark from source, you'll need to include the Hive and Hive-ThriftServer modules during the build process. Use the following command:

Bash ./build/sbt clean assembly -Phive -Phive-thriftserver

Based on comments on the post, it seems like you want to generate runtime information from types. This is not possible. TypeScript types do not exist at all at runtime so you cannot generate things from them.

You would have to hack on the compiler (see https://github.com/nonara/ts-patch), or do what e.g zod does and generate types from function calls, which is possible.

How can I correctly manage MySQL database connections across threads in Qt?

According to Qt themselves

A database connection must only be used from within the thread that created it. Moving a connection into another thread can be done with QSqlDatabase::moveToThread().

In addition, the third party libraries used by the QSqlDrivers can impose further restrictions on using the SQL Module in a multithreaded program. Consult the manual of your database client for more information

https://doc.qt.io/qt-6/threads-modules.html#threads-and-the-sql-module

What are the differences between these two QSqlDatabase declaration methods?

One of the 2 accepts connectionName as an argument

Adds a database to the list of database connections using the driver type and the connection name connectionName. If there already exists a database connection called connectionName, that connection is removed.

The database connection is referred to by connectionName. The newly added database connection is returned.

If type is not available or could not be loaded, isValid() returns false.

If connectionName is not specified, the new connection becomes the default connection for the application, and subsequent calls to database() without the connection name argument will return the default connection. If a connectionName is provided here, use database(connectionName) to retrieve the connection.

https://doc.qt.io/qt-6/qsqldatabase.html#addDatabase

When the $dataColumns variable is null you will get exactly this error:

Uncaught TypeError: implode(): Argument #1 ($pieces) must be of type array, string given

However you don't have ($pieces)!

Same situation for me. Just check your logic to be sure your variable is not null! That worked for me.

I tried the following:

• Enable and Disable Auto Rotate.
• Installing multiple force orientation apps from google store.
• Upgrade flutter to see if the issue is resolved.

But unfortunately it keeps consistenet behavior to auto rotate device.

After that, I tested using a phone emulator the issue is not there.

The issue is not related to flutter, but all android tablet emulators.

I assume testing on real android tablets will not generate the same issue. I'll update answer after I test on a real device tablet!

This is impossible. More details can be found in the following link: https://discourse.threejs.org/t/can-we-play-sound-of-a-video-without-user-interaction/67865/2

I had the same problem and fixed it by creating a virtual environment and installing tkcalendar in it. I think the problem arises because tkcalendar or babble conflict with some other installed modules, thus a virtual environment isolates tkcalendar

What you are looking for is %:z. Its a directives Added in version 3.12.

https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes

UTC offset in the form ±HH:MM[:SS[.ffffff]] (empty string if the object is naive): +00:00

How about simplifying to base units then comparing e.g.,:

import pint
u = pint.UnitRegistry()    
u('nM').to_base_units() == u('nmol/L').to_base_units()

To fix the dependency cycle error:

1. Check Dependencies: In Build Phases for both Insightfull and Insightfull WatchKit Watch App targets, ensure they aren’t listed as dependencies of each other.

2. Verify Copy Files Phase: Remove Insightfull WatchKit Watch App from the Copy Files or Embed App Extensions phase under the Insightfull target.

3. Clear Derived Data: Delete Derived Data for Insightfull in Xcode → Settings → Locations.

4. Check Info.plist: Make sure Info.plist files for both targets don’t reference each other. Rebuild the project to see if this resolves the cycle.

I upgraded the Angular Project It was angular CLI 18.2.5 to angular CLI 18.2.11 and received this error.

I did a npm update and then a npm outdated to confirm the versions installed were correct, still no luck.

I ended up completely wiping the node_modules folder and reinstalling with npm install! Problem solved.

I like @Javier answer (which I actually used in my code, so thanks!). I needed to perform further work on that, and I found a quick and dirty way of doing the same

data <- data.frame(
entry = paste0("Entry.", 1:10),
"A" = c(0,0,0,0,1,0,1,1,0,0),
"B" = c(1,0,0,0,1,1,1,1,1,0),
"C" = c(1,1,1,1,0,0,1,0,1,1))
aggregate(data$Entry,by=list(data$A,data$B,data$C),FUN="length")

The problem you are facing is probably caused by prerender. JSinteroop is not accesbile while prerendering the page thus, protectedLocalStorage is null because it relies on JS.

I always disable prerendering so I do not need to deal with it. It' s annoying so it's best to split your app into 2 part. The one for not logged users (promo page/ contact page etc.) and actual app that needs your state.

On the other hand you could implement your own logic for error handling and dealing with preload.

val workbook: Workbook = Workbook() val ws = wb.newWorksheet("Sheet1") ws.value(currentRow, currentCol, LocalDate.now()) ws.style(currentRow, currentCol).format("dd.MM.yyyy").set()

Elastic collisions are not as intuitively to implement. This might be a handy solution: https://github.com/joembedded/Elastic-Collisions

I also got the same error when I was training an Image classification model with a reference-style image dataset. Here I implemented a Custom Dataset Class by extending from torch.utils.data import Dataset class. Same as you I haven't encoded my target labels and they are just a tuple of class names(strings). Since PyTorch tensors don't accept string data directly, I had to convert these labels into integer-encoded tensors before using them in model training.

NO! This answer still hasn't solved my problem. I encountered the same issue with the prompt "Error while fetching extensions. Failed to fetch", but it's really a computer problem. I turned on VPN once while running vsCode normally, and since then my vsCode has been like this. I couldn't find any extensions. I tried uninstalling and deleting the configuration folder, which made the situation worse. I even cleared all the extensions I had before! I have also tried changing the system's proxy files, resetting the network in computer settings, and turning on and off VPN again, but none of these have worked. Oh my god, what should I do? Do I have to reinstall the system!?T_T

There is an official documentation of how to install word plugins.

https://learn.microsoft.com/en-us/office/dev/add-ins/publish/publish

You can choose any method you prefer to install your plugin.

Other than that, check that you are using MessageBox, from winapi, correctly.

You marking some functions as "C". Are you sure that MessageBox is a C, not C++ function?

int MessageBox( [in, optional] HWND hWnd, [in, optional] LPCTSTR lpText, [in, optional] LPCTSTR lpCaption, [in] UINT uType );

uTyPe parameter is the only non-optional parameter to the function. You pass zero to the parameter. Is this expected?

Turn on warnings for your compiler. The one that i see straight away, is that function parameters is unused.

The issue has been resolved. Apple uses a non-standard location for the attributes, which is unsupported by GCC. However, an adapted version for GCC 14.2 is now available that addresses this compatibility for macOS only. Updated packages are available also on Homebrew.

For more details refer to this closed GitHub issue: https://github.com/iains/gcc-14-branch/issues/12

I find way to handle this problem by giving custom format to my datetimepicker and try to save it as a string instead of date type.

Instead of model.fc, you may need to use model.classifier to point to the correct layer in your model.

Dont use entire link for cloning repo, just try till autogen i.e.

git clone https://github.com/microsoft/autogen

finnally found the solution after long hours of internet search.

you must add these 2 lines :

def create_image(image_data, width, height, image_tag, texture_tag):
    with dpg.texture_registry():
        texture_id = dpg.add_static_texture(width, height, image_data, tag=texture_tag)

    # Add the image with drag and drop functionality
    dpg.add_image_button(texture_id, tag=image_tag, payload_type="image_payload", drag_callback=drag_callback, drop_callback=drop_callback)

    # add this to enable drap&drop:
    with dpg.drag_payload(parent=image_tag, drag_data="dragdata", payload_type="image_payload"):
        dpg.add_text("popup drag")

In my case i just changed <BrowserRouter/> with <HashRouter/> if you use one.

I have run this same code for some experiments. It's highly possible you have unexpected behaviors.

I have created this shell script inspired from various SO posts and some example scripts I found long back online.

https://github.com/bkrajendra/android_backup

Script can be executed on Win/Mac/Linux and needs to have adb cli tools. Use gitbash or MobaXterm on Windows

Usage:

./backup.sh [-r remote_folder] [-l local_folder]
e.g. ./backup.sh sdcard/DCIM/Camera /f/Photo/A52

This will also resume download if gets broken in between.

For windows users, nvm for Windows is a little tricky.

Check 1. The node path is actually in the Environment variables. in my case, it is ~\AppData\Roaming\npm

Check 2. The %NVM_HOME% and also %NVM_SYMLINK% is set. And they also should be set in the PATH variable

Check 3. The npm path actually contains the node.js. If it doesn't, it probably is a reminant of the old installation. In my case, I remove it with rm -rf. The reason it blocks nvm, is that nvm(fow windows) have to set up sym link in that path. If there is a real file in the path, nvm(for windows) will fail silently.

The above image is missing the node. instead it should be like:

Even if the symlinks doesn't work, and the environment variables are wrong, It should be possible to run node and npm from this directory directly.

I've successfully installed tensorflow , win10 terminal as follows:

conda create -n env363 python=3.6.3 anaconda # my problem was python version
> conda activate env363

The tensorflow versions installed are:

Name Version Build Channel
tensorflow 1.14.0 h39a9291_0 conda-forge
tensorflow-base 1.14.0 py36h9f0ad1d_0 conda-forge
tensorflow-estimator 1.14.0 py_0

Any further enhancements is much appreciated

I recently struggled with this as well, according to https://rapier.rs/docs/user_guides/bevy_plugin/colliders#active-collision-types, you have to explicitly enable collisions between specific types of rigid bodies and colliders. Check the documentation of ActiveCollisionTypes to see which flags you need.

In windows file explorer and search *jpg or whatever file format you want to select and then copy-paste to desired location.

Their are two character one girl and one boy. This is a online game the character can control by player and their are option of romace i.e., kiss, hug, talk etc.

My netatmo refresh token has also been expired (> 3 hrs old). I have the same error here: I can not refresh the access - and refresh code. I used the 'ChatGPT' method/code as suggested by @Tabsy21. The output I get is:

400
{"error":"invalid_grant"}

I'm having the exact same problem and don't understand the solution outlined here. Could someone explain, please?

Simply, place procedure Discard(..) in Public section of form1 declaration

Unfortunately, the incorrect version number is hard-coded in the code.

For reference: https://github.com/hammerjs/hammer.js/blob/v2.0.8/hammer.js#L2148

Release tag is 2.0.8 but inside the file is says 2.0.7.

Sadly this is the last release (now 8 years ago) and the library seems to be abandoned.

Any update on this issue? I have the exact same use case but unable to create a threaded reply to bot trigger message in a space.

Spark's BloomFilter implementation uses a formula to calculate the optimal bit size based on the expected number of items and the desired false positive rate. This calculated bit size might not always be exactly equal to the value you might have anticipated. The library aims to provide a good balance between space efficiency and accuracy.

Reference - https://github.com/apache/spark/blob/master/common/sketch/src/main/java/org/apache/spark/util/sketch/BloomFilter.java#L211

It looks like you're trying to ensure that the image fits and clips correctly within the grid element while . The issue likely arises because the overflow property isn’t set on the parent container to handle clipping.

.bento3 { display: grid;

overflow: hidden; }

.bento3 > img {

width: 100%;

height: 100%;

object-fit: cover;

margin-top: 14px; }

Did you manage to fix this? I get a very similar error and stack trace. It make no sense. The application used to work and out of a sudden it started throwing this error:

Unhandled Exception:
System.ArgumentNullException: Value cannot be null. (Parameter 'obj')
   at System.ArgumentNullException.Throw(String paramName)
   at System.ArgumentNullException.ThrowIfNull(Object argument, String paramName)
   at System.Threading.Monitor.Enter(Object obj, Boolean& lockTaken)
   at ObjCRuntime.Class.ResolveTokenReference(UInt32 token_reference, UInt32 implicit_token_type) in /Users/builder/azdo/_work/1/s/xamarin-macios/src/ObjCRuntime/Class.cs:line 480
   at ObjCRuntime.Class.ResolveMethodTokenReference(UInt32 token_reference) in /Users/builder/azdo/_work/1/s/xamarin-macios/src/ObjCRuntime/Class.cs:line 465
   at ObjCRuntime.Runtime.GetMethodFromToken(UInt32 token_ref) in /Users/builder/azdo/_work/1/s/xamarin-macios/src/ObjCRuntime/Runtime.cs:line 885
   at ObjCRuntime.Runtime.get_method_from_token(UInt32 token_ref, IntPtr* exception_gchand
le) in /Users/builder/azdo/_work/1/s/xamarin-macios/runtime/Delegates.generated.cs:line 593
--- End of stack trace from previous location ---
   at ObjCRuntime.Runtime.RethrowManagedException(IntPtr exception_gchandle) in /Users/builder/azdo/_work/1/s/xamarin-macios/src/ObjCRuntime/Runtime.cs:line 573
   at Foundation.NSObject.InvokeOnMainThread(Action action) in /Users/builder/azdo/_work/1/s/xamarin-macios/src/Foundation/NSObject2.cs:line 808
   at Microsoft.Maui.ApplicationModel.MainThread.InvokeOnMainThread[UITraitCollection](Func1 factory)
   at Microsoft.Maui.ApplicationModel.AppInfoImplementation.get_RequestedTheme()
   at Microsoft.Maui.ApplicationModel.AppInfo.get_RequestedTheme()
   at Microsoft.Maui.Controls.Application..ctor(Boolean setCurrentApplication)
   at Microsoft.Maui.Controls.Application..ctor()

In my case, there was a column of data that had mixed data types - numbers stored as text mixed with integers. Removing that column (and I assume reformatting) fixed this.

hey i too need help with the wix forms and zoho campagins integration help me

I had to add paths compiler option to the tsconfig.app.json file instead of the tsconfig.json file for my IDE to recognize.

"paths": {
  "src/*": [
    "./src/*"
  ],
}

Along with the resolve config for vite.config.ts file.

resolve: {
  alias: {
    src: '/src',
  },
},

As explained at https://developer.apple.com/documentation/combine/performing-key-value-observing-with-combine you can create a combine listener

statusObserver = player.publisher(for: \.timeControlStatus)
    .receive(on: DispatchQueue.main)
    .sink { newStatus in
        isPlaying = newStatus == .playing
    }

where isPlaying: Bool and statusObserver: AnyCancellable? are private @State properties on my view.

I had the same issue, deleting the VS folder did not work for me.

Unloading and loading the project resolved the issue for me.

You can do this in Visual studio by right clicking the project and selecting unload project and then clicking load project.

Launching lib\main.dart on Infinix X6525 in debug mode... Running Gradle task 'assembleDebug'... /C:/Users/j/AppData/Local/Pub/Cache/hosted/pub.dev/rive-0.13.4/lib/src/rive_core/artboard.dart:538:4: Error: Undefined name 'mustBeOverridden'. @mustBeOverridden ^^^^^^^^^^^^^^^^ /C:/Users/j/AppData/Local/Pub/Cache/hosted/pub.dev/rive-0.13.4/lib/src/rive_core/artboard.dart:538:4: Error: This can't be used as an annotation; an annotation should be a reference to a compile-time constant variable, or a call to a constant constructor. @mustBeOverridden ^ /C:/Users/j/AppData/Local/Pub/Cache/hosted/pub.dev/rive-0.13.4/lib/src/rive_core/artboard.dart:541:4: Error: Undefined name 'mustBeOverridden'. @mustBeOverridden ^^^^^^^^^^^^^^^^ /C:/Users/j/AppData/Local/Pub/Cache/hosted/pub.dev/rive-0.13.4/lib/src/rive_core/artboard.dart:541:4: Error: This can't be used as an annotation; an annotation should be a reference to a compile-time constant variable, or a call to a constant constructor. @mustBeOverridden ^ /C:/Users/j/AppData/Local/Pub/Cache/hosted/pub.dev/rive-0.13.4/lib/src/rive_core/artboard.dart:544:4: Error: Undefined name 'mustBeOverridden'. @mustBeOverridden ^^^^^^^^^^^^^^^^ /C:/Users/j/AppData/Local/Pub/Cache/hosted/pub.dev/rive-0.13.4/lib/src/rive_core/artboard.dart:544:4: Error: This can't be used as an annotation; an annotation should be a reference to a compile-time constant variable, or a call to a constant constructor. @mustBeOverridden ^ lib/views/screens/bottom_nav_screens/menu/menu_screen.dart:31:13: Error: 'MenuController' is imported from both 'package:flutter/src/material/menu_anchor.dart' and 'package:mine_lab/data/controller/menu_controller/menu_controller.dart'. Get.put(MenuController(menuRepo: Get.find())); ^^^^^^^^^^^^^^ lib/views/screens/bottom_nav_screens/menu/menu_screen.dart:9:1: Error: 'MenuController' is imported from both 'package:flutter/src/material/menu_anchor.dart' and 'package:mine_lab/data/controller/menu_controller/menu_controller.dart'. import 'package:mine_lab/data/controller/menu_controller/menu_controller.dart'; ^^^^^^^^^^^^^^ lib/views/screens/bottom_nav_screens/menu/menu_screen.dart:123:38: Error: The getter 'logoutLoading' isn't defined for the class 'Object?'.

• 'Object' is from 'dart:core'. Try correcting the name to the name of an existing getter, or defining a getter or field named 'logoutLoading'. controller.logoutLoading ? const Align( ^^^^^^^^^^^^^ lib/views/screens/bottom_nav_screens/menu/menu_screen.dart:132:59: Error: The method 'logout' isn't defined for the class 'Object?'.
• 'Object' is from 'dart:core'. Try correcting the name to the name of an existing method, or defining a method named 'logout'. onPressed: () => controller.logout() ^^^^^^ Target kernel_snapshot failed: Exception

FAILURE: Build failed with an exception.

• Where: Script 'C:\Users\j\AppData\Local\Android\Sdk\flutter\packages\flutter_tools\gradle\flutter.gradle' line: 1151

• What went wrong: Execution failed for task ':app:compileFlutterBuildDebug'.

Process 'command 'C:\Users\j\AppData\Local\Android\Sdk\flutter\bin\flutter.bat'' finished with non-zero exit value 1

• Try:

Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output. Run with --scan to get full insights.

• Get more help at https://help.gradle.org

BUILD FAILED in 1m 49s Exception: Gradle task assembleDebug failed with exit code 1

The start-sleep cmdlet is involved in the script I need to use; while it's alright to trigger the execution when the task is created or modified in Task Scheduler, I am not sure how the 60 secs of sleep are interacting from within the script block along with the Task Scheduler. (I mean like, it could be the Scheduler has the task running by now, but is it the ps1 script performing sleep-start at the same time?)

In my csae, ubuntu wsl is used, wsl version is key, see https://github.com/pytorch/pytorch/issues/73487

In Strapi v5; there two new notions that you need to have clear understanding of for your daily CRUD operations. Here is what you have to consider:

• First we have the draft/published entries, just like for locales, they have different ids but a same documentId.
• Second, always use use the new documentId attribute to read, search, update or delete single elements otherwise you will be getting 404 responses.

Notice: As for v5.2.0, user-permissions pluging still working with id attribute for CRUD operations soespectially for this plugin, use id instead of documentId