You could do something with toscalar() values and the like, would something like this work in your use case?

let AzureMetric = datatable(timestamp:datetime, metric:string) [
datetime(2024-10-28 12:00:00), 'metric1',
datetime(2024-10-28 15:00:00), 'metric2'
];
let AegDataplaneRequest = datatable(timedate:datetime, request:string) [
datetime(2024-10-27 12:01:00), 'request1',
datetime(2024-10-28 13:01:00), 'request2'
];
let MostRecentAzureMetric = toscalar(AzureMetric | summarize max(timestamp));
let MostRecentAegDataplaneRequest = toscalar(AegDataplaneRequest | summarize max(timedate));
let TimeDifference = datetime_diff('minute', MostRecentAzureMetric, MostRecentAegDataplaneRequest);
print TimeDifference

Say your bitmap is 256 bits and you want to produce an index of 8 bits.

logic [255:0] bitmap;
logic   [7:0] idx;

always_comb begin
  idx = '0;
  for (int i = 0; i < 256; i++) begin 
    if (bitmap[i]) begin
      idx |= 8'(i);
    end
  end
end

Try moving your Item definition outside of the ParentComponent definition:

const Item = styled(Paper)({
  textAlign: 'center',
}); 

const ParentComponent = () => { ... }

When you change state inside ParentComponent, it re-runs all the code inside that component. So your "Item" component is getting reinitialized with each state change, forcing its children to re-mount, since it's treated like a whole new component.

Have you tried to set your buttons onClick event to call the mock function?

const { getByLabelText } = renderWithProviders(<SoundBtn onClick={preventDefaultSpy} />);

How do I identify if a table is partitioned?

SELECT 
  TABLE_NAME, 
  TABLE_SCHEMA, 
  PARTITION_TABLE 
FROM 
  QSYS2.SYSTABLES
WHERE 
  TABLE_SCHEMA = 'YOUR_SCHEMA' 
  AND
  TABLE_NAME = 'YOUR_TABLE';

How do I find out the number of partitions of a Table?

SELECT 
  count(*) as NUM_PARTITIONS
FROM 
  QSYS2.SYSPARTITIONDISK
WHERE 
  TABLE_SCHEMA = 'YOUR_SCHEMA' 
  AND
  TABLE_NAME = 'YOUR_TABLE';

How do I Write a Query to retrieve data from a Specific partition by providing a partition name or number reference?

SELECT A.*
FROM YOUR_TABLE A
WHERE DATAPARTITIONNAME(A) = 'PARTITION_NAME';

Had the same issue with Select2 (4.0.13) and Bootstrap 5 modal. Simple fix is simple css for search input field.

.select2-container .select2-search--inline .select2-search__field{    
    min-width: 160px;
} 

Another Workaround would be to update to Kubuntu 24.10 which uses Qt6 instead of Qt5 which seems to have recieved a fix for this issue. Unfortunately there is no backport fix for this in Qt5 (yet).

SOURCE

Figured it out. ReturnType "Number" sets it to a decimal in Coveo, "Integer" will set it correctly. The documentation for the return types is here

This is the best solution I've come up with so far. By adding an extra class and a timeout function to this class. This delays the load of the second slide and prevents the overlapping/stacking.

setTimeout(function() {
  $('.hide-slide').removeClass('hide-slide');
}, 100);

.hide-slide {
  visibility: hidden;
}

You could do it like this:

  unsigned int log2 = 0;
  while (x != 1) {
    x >>= 1;
    log2++;
  }
  unsigned int x_log2 = log2;

The log2 value will be rounded down.

Try to install rust in your machine (assuming Mac OS)

brew install rust

If anyone faces this issue in Netbeans, The answer @AyushDhakal works, closing and reopening Netbeans fixes the error.

Solution: You can only build in electron for the actual operation system you are, so, if you want to build for rpm and deb, need to be on ubuntu or fedora for example, if you want to build on windows, need to be on windows, sadly...

Global Layout and providers wrap the entire application, which means loading once and persists across all pages.

Layout.tsx inside app directory defines layouts for individual pages or a group of pages.

I hope this will help you understand.

Start debugging this way:

1. Create a test PostgreSQL database on a different server and try to connect to that through Power BI. Use the default Power BI connector for PostreSQL. Is this working?
2. Now try to connect again to that test PostgreSQL database but this time through the SQL query. Is it working?
3. Now encrypt the test database with AES-128-CBC. Try to connect first with the official Power BI connector for PostgreSQL and then through the SQL query. Is it working with both?

This is how I would debug the whole thing

At times this problem arises when your file wasn't saved by your code editor

Replacing

 const double &spread[])

to

 const  int &spread[])

is solving the problem

# open the HDF5 file
with h5py.File(hdf5_path, 'r+') as hdf:  # 'r+' mode allows overwrite existing file
    # open the NetCDF file
    ncdf_file = Dataset(self.CDF_path, 'r')
    # create a new group for NetCDF data within HDF5 file
    ncdf_group = hdf.create_group(f'Advanced_ASTRA/Astra_output')

    # loop over each variable in the NetCDF file
    for var in ncdf_file.variables:
        # create a new group for each variable
        var_group = ncdf_group.create_group(var)
        # save data, units, and long_name as datasets within this group
        var_group.create_dataset('data', data=ncdf_file.variables[var][:])
        var_group.create_dataset('units', data=str(ncdf_file.variables[var].units))
        var_group.create_dataset('long_name', data=str(ncdf_file.variables[var].long_name))

    ncdf_file.close()

The text label is not showing on the rectangle because I am using OBJ_LABEL, which positions text relative to the chart window (not within the chart's price-time coordinates). To make the label appear at a specific position within the chart (aligned with the rectangle), I should use OBJ_TEXT instead of OBJ_LABEL.

You can do it by setting width value in meta viewport.

<meta name="viewport" content="width=1024, initial-scale=1">

You have an extra <div class="container-fluid"> that is interfering with the row. If you just remove it everything will fall into place. You will also need to remove the order-x classes.

<body>
  <div class="row">

    <div class="col-16 bg-dark">
      <div class="d-flex justify-content-center">
        <h1 class="text-white">Welcome to the Website</h1>
      </div>
    </div>
    <div class="col-md-6 bg-dark">
      <div class="justify-content-center">
        <h1 class="text-white">Rate our website</h1>
      </div>
      <div class="justify-content-between">
        <button onclick="increasenumber()" id="coolbutton" type="button" class="btn btn-success">Upvote</button>
        <button onclick="decreasenumber()" id="coolbutton1" type="button" class="btn btn-danger">Downvote</button>
        <button onclick="resetcount()" id="coolbutton2" type="button" class="btn btn-info">Reset</button>
      </div>
      <div class="justify-content-center">
        <h1 class="text-white" id="counter">0</h1>
      </div>

    </div>
    <div class="col-md-4 bg-dark">

    </div>
  </div>

</body>

You can tell PostgreSQL to map the varchar to the default_calculation_method PostgreSQL enumeration. Run the following on your database: CREATE CAST (varchar AS default_calculation_method) WITH INOUT AS IMPLICIT;

Similar to the accepted answer, you can also use inverted pd.Series.between to get the same result.

Test = df[~df['QC 1'].between(40, 100)]

Any updates on this? I have the sampe problem...

Thank you for posting this answer, it's appreciated! Do you know how I can also pull in the product prices next to the titles in the dropdown?

There is nothing wrong of storing current user in singleton and use it where you need it (pass it through DI for testing purposes).

Using it in AppDelegate you don't help yourself with that point since AppDelegte is singleton by itself.

If you want to avoid using singleton than storing it with CoreData or SwiftData will be much better approach.

<figure>
<p align="center" width="100%">
  <img src="figures/init_result.png" alt="init_result" style="width:100%">
  <figcaption><h2 align="center">Fig.1 - Initial result caption.</h2></figcaption>
  </p>
</figure>

Can it be packed normally? You can send a private message, I can help you take a look here

Why not having one organization per client. We try to avoid multiple organizations, but your use case is a perfect match for that. If all client's repositories have to share code from your repo, simply create your organization, transfer shared repositories to it, allow everybody from your enterprise (or you don't have github enterprise license ? ).

This way, you're able to install a AWS Github Connexion App on each organization with client specific authentication.

this is answered in this forum thread. In order to enable the debug logging, can take a look here: https://forum.cockroachlabs.com/t/getting-issue-in-cockroach-db-cluster/6152

When you display the message in Activity A, use a flag like "shouldDisplay = true"; and reset it to false when you close the message. And in onPause of activity A, if "shouldDisplay" is true, either save the flag and remaining time to a sharedpreference file or use an intent. And in activity B's onCreate (or wherever you want) access that sharedpreference file and if the value is true, display the message again / receive the intent and display the message based on the remaining time. Once total time is over, reset the flag to false in sharedpreference file. You can also save content of the message to sharedpreference file / share it via intent if the message isn't static

Edit ssh config file:

sudo pico ~/.ssh/config

Then add these lines:

Host github.com
    IdentityFile /Users/myUser/.ssh/id_rsa
    IdentitiesOnly=yes

Have you tried adding slice labels? (Customize tab > Pie chart > Slice label: Value)

Then make the chart area bigger or the "label font size" smaller, and you should see the values popping up.

If you want to remove the percentages then remove the Legend (Customize tab > Legend > Position: Left

You can also change the color of each series if you want some nicer pallette (Customize tab > Series > Format color)

Solved. I put the controller on SingleChildScrollView() and not with ListView.builder

Thank you,

Just popping in to add that if the URL you're trying to have open automatically isn't localhost (because your app has a local URL proxy configured), set open to the string path instead of a boolean, e.g.,

export default defineConfig({
  server: {
    open: 'https://mycustomlocalurl.io/basepath'
  }
})

I know this is an old question, but since then, AWS have wrote this small doc on this topic:

Locally testing AWS CDK applications with AWS SAM

Thanks a lot for posting source code, I had the same problem with lombok annotation and Intelj and was able to fix it by setting -Djps.track.ap.dependencies=true There are a lot of sources that instruct to set this flag to false and it is not working

As pointed out by others and John above, If the instances are in Warmed:Running state, it will still appear in your containers as an application since the container is running and independent of the AWS Warm pool state. If you want them to not appear in the containers, might as well change the warm pool configurations to Stopped state.

I have no expertise on the topic, so don't ask me why but it seems a header was added to the decrypted value.

I was able to fix it by replacing line:

return decrypted.decode('utf-8')

by:

return decrypted[32:].decode('utf-8')

in file /Users/python311/lib/python3.11/site-packages/browser_cookie3/__init__.py

Any luck ? I'm having the same issue with the generic failure.

sorry for reviving this old issue .. but I started to see the same issue one one of my dev machines. The same multi-project Gradle structure works fine on one machine .. and fails on the other.

The above comment mentions symlink ... but I am not using symlinks (at least not on purpose), plus I am seeing this issue on windows ...

Any ideas?

For choosing files for training and testing:

In general, 70-80% of data for training and the remaining 20-30% of data for testing are used. So, select the files for training and testing to have a ratio closer to 3:1.

As mentioned in the comment, I realized I had overlooked the class name conventions and have fixed that..

Solved by checking this issue: https://github.com/boto/boto3/issues/3015

Thanks

I would like to add more information, but I can't comment since I don't have 50 reputation. So I'll share how I'm facing the issue after upgrading to Android Studio Ladybug.

I get this error:

    * What went wrong:
Execution failed for task ':video_player_android:compileDebugJavaWithJavac'.
> Compilation failed; see the compiler error output for details.

Running ./gradlew --version inside the android folder gives this output:

------------------------------------------------------------
Gradle 7.4
------------------------------------------------------------

Build time:   2022-02-08 09:58:38 UTC
Revision:     f0d9291c04b90b59445041eaa75b2ee744162586

Kotlin:       1.5.31
Groovy:       3.0.9
Ant:          Apache Ant(TM) version 1.10.11 compiled on July 10 2021
JVM:          11.0.25 (Homebrew 11.0.25+0)
OS:           Mac OS X 15.0.1 aarch64

I also tried the Android Gradle plugin Upgrade Assistant but it won't even open.

I'll update if I have more information.

Does the class even conform to P if it’s not Codable? E.g. would something like this work?

final class A<T> {}

extension A: Codable, P where T: Codable {
    func load() {
        let decoded = try? JSONDecoder().decode(Self.self, from: Data())
    }
}

The downside is you can’t add another conditional conformance to P if T is not Codable…

The issue was in my misunderstanding how inheritance works.

If I put Base script and Derived script on the same gameobject, then there will be created two instances of Base script and ProcessAllCubeDataOfUpcomingChunk will be called twice.

I encountered this issue due to the network restrictions and rules set by our organization, along with VPN limitations. Because of these restrictions, the intent will not work on your emulator or device with HTTPS in the browser. I tried alternative methods to resolve it, but the solution is to raise a support ticket and contact the IT team. They can grant the necessary permissions, which should resolve the issue.

Try to install a dependance of @material-tailwind :

npm i @types/[email protected]

Follow this link : [githbub :Can't resolve '@material-tailwind/react][1]

You are returning an empty fragment <></> from your App.jsx, I see you have imported DigitalClock but you are not using it.

change App.jsx code to:

import DigitalClock from "./DigitalClock";

function App(){
    
    return <DigitalClock />;
};

export default App

script_val =dict({"a":1, "b":2, "c":3})
not_script_val = 5
print(f"{hasattr(script_val,'__getitem__')=}")
print(f"{hasattr(not_script_val,'__getitem__')=}")

hasattr(script_val, '_getitem_')=True
hasattr(not_script_val, '_getitem_')=False

Had the same issue. See if any of the following helps.

import sage.libs.ecl
sage.libs.ecl.ecl_eval("(ext:set-limit 'ext:heap-size 0)")

From the discussion here: https://groups.google.com/g/sage-support/c/nieHqAWPHpQ?pli=1

A more in depth discussion is available here.

https://github.com/sagemath/sage/issues/6772

And the memory limits that you can change can be found here on the manual.

https://ecl.common-lisp.dev/static/files/manual/current-manual/Memory-Management.html#tab_003amem_002dlimits

Feel free to correct any mistakes, as I am also in the process of learning Sage.

I don't know how to delete my own question so i'll just say how i fixed it. Instead of using WebBrowser I used WebView2 NuGet and it fixed the issue.

First Update com.android.application in settings.gradle file id "com.android.application" version "8.3.2" apply false

After That come in gradle folder inside wrapper folder you'll find gradle-wrapper.properties add this:- distributionUrl=https://services.gradle.org/distributions/gradle-8.4-all.zip

Then Restart the IDE

I hope this will work

I have had this problem earlier and managed to solve it. What I have done is simply just put this in the homepage(first page the app is rendering) in my blazor project

`@inject TeamsUserCredential teamsUserCredential

@inject MicrosoftTeams MicrosoftTeams

protected override async Task OnAfterRenderAsync(bool firstRender) { await base.OnAfterRenderAsync(firstRender); if (firstRender) { var isInTeams = await MicrosoftTeams.IsInTeams(); if (isInTeams) { UserInfo user = await teamsUserCredential.GetUserInfoAsync(); } StateHasChanged(); } }`.

Maybe the code have tried to connect to Teams by this before the timeout, so that the error disappeared? But it works for me.

As @juanpethes mentioned, the best way to do this for the Google Search API is to add site:domain.com to your q param. For example: q=Coffee site:amazon.com OR walmart.com

Sample Playground link: https://serpapi.com/playground?q=Coffee+site%3Aamazon.com+OR+site%3Awalmart.com&location=Austin%2C+Texas%2C+United+States&gl=us&hl=en&newPara=as_sitesearch+chips

Since you mentioned shopping results, I should note Google Shopping does not support these site:domain.com type filters. Instead, you need to refer to the filters array that SerpApi returns in a request to the Google Shopping API. There are several options within filters including Stores which provide a few a stores you can filter results too.

These are limited to what Google Shopping offers for any given search unfortunately. You cannot filter for any arbitrary store you want. This is a limitation of Google that SerpApi cannot work around.

For example:

https://serpapi.com/playground?engine=google_shopping&q=Coffee

"filters: [
...
 {

    "type": "Stores",
    "options":
    [
        {
            "text": "Target",
            "serpapi_link": "https://serpapi.com/search.json?device=desktop&engine=google_shopping&gl=us&google_domain=google.com&hl=en&q=target+coffee&shoprs=CAEYAioGY29mZmVlMgoIAhIGVGFyZ2V0WLfLH2AC"
        }
        ,
        {
            "text": "Walmart",
            "serpapi_link": "https://serpapi.com/search.json?device=desktop&engine=google_shopping&gl=us&google_domain=google.com&hl=en&q=walmart+coffee&shoprs=CAEYAioGY29mZmVlMgsIAhIHV2FsbWFydFi3yx9gAg"
        }
        ,
        {
            "text": "Home Depot",
            "serpapi_link": "https://serpapi.com/search.json?device=desktop&engine=google_shopping&gl=us&google_domain=google.com&hl=en&q=home+depot+coffee&shoprs=CAEYAioGY29mZmVlMg4IAhIKSG9tZSBEZXBvdFi3yx9gAg"
        }
        ,
        {
            "text": "Sears",
            "serpapi_link": "https://serpapi.com/search.json?device=desktop&engine=google_shopping&gl=us&google_domain=google.com&hl=en&q=sears+coffee&shoprs=CAEYAioGY29mZmVlMgkIAhIFU2VhcnNYt8sfYAI"
        }
    ]

  }
...
]

Use the serpapi_link for the store you want to filter by to get results only for that store. You just need to append your api_key to the request.

Disclaimer: I work for SerpApi.

The issue causing incorrect pattern scaling is a bug that has been fixed since the Highcharts v11.3.0 release.

References:
https://www.highcharts.com/blog/changelog/#highcharts-maps-v11.3.0
https://github.com/highcharts/highcharts/issues/19551

This is how I implemented site-to-site on pfsense, maybe you can adapt from here https://merox.dev/blog/tailscale-site-to-site/ or of this guy video: https://www.youtube.com/watch?v=Fg_jIPVcioY

It's not supported by Datadog. I've raised a feature request in August 2023 via their support portal and it's not yet implemented.

If you are using any variable as ref then that variable should not have get; set; access specifiers. If you are having then you will get above mentioned error.

I tested it on my local machine, and there is a significant difference in the time taken by both methods. The join method is much more time-efficient than the += approach.

my python version: 3.9.13

can the app be successfully packaged?

Your command is almost correct! Just remove the zero before the ..10!

Correct command:

/execute as @e[tag=shulker,distance=..10] run give @a[scores={dragon_death=19..}] coarse_dirt 1

From personal experience using the distance modifier, it's a little finicky in the way that it handles the value. the zero always messes it up, no idea why. Thank you for your detailed question!

There are a few factors at play here.

• Focal length specifications on lenses will always only be "approximate". Specifically in the case of a M12 lens, focal length usually changes slightly with focus when the lens is screwed in and out of its threaded holder.
• I would also not expect the pixel size specification to be accurate to more than 5%, especially not in uncontrolled temperature environment.
• The focal length will often be correlated with distortion parameters. I.e. focal length may be smaller than nominal and distortion estimated to compensate for that.

Calib.io has the Calibrator program, which lets you investigate whether such parameter correlations exist, and lets you obtain a best fit linear camera model, estimating an "effective focal length" comparable to what you achieve experimentally. Further, Calibrator lets you analyse whether the remaining rpe is due to un-modelled lens behaviour (bad), or only due to unbiased image noise (harmless).

Problem:

The repository 'https://ppa.launchpadcontent.net/stebbins/handbrake-releases/ubuntu jammy Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details.

Thanks Ryan I did the same thing and it is now working. Let me explain. While loading data via the pipeline, in addition to putting data as a comma delimited value against the description as VectorValues nvarchar(max). I also added them as float in another table, against the Description Id (PK). I then created a view on top to combine these two tables on PK = FK and while picking up, I converted those child records (vector values) into json array.

This seem to have resolved the issue. and data is loading in the index.

SELECT 
     r.GIID
    ,r.ReportName
    ,r.[Description]
    ,JSON_QUERY('[' + STUFF((
                SELECT CONCAT(',', v.VectorValue,'')
                FROM dbo.ReportVectorData as v
                WHERE v.ReportGIID = r.GIID
                FOR XML PATH('')),1,1,'') + ']') AS VectorValue
FROM dbo.vwSearchReportsWithSecurity as r 

It's a caching issue. Get rid of your cahcing on your product pages and cart pages.

Install corresponding Build Tools version using Android Studios's SDK Manager.

Then build the project again.

Convert each object column to categorical

df = df.apply(lambda col: col.astype('category') if col.dtypes == 'object' else col)

We have the same problem in expo 51, but only with gallery picker file sending. The problem can be replicated with local build pointing to prod API. We tried :

• XMLHttpRequest
• Fetch
• Axios fetch
• Change header (content type, accept)
• Change redirect to follow
• Change mode to cors
• Change cache to no-cache
• Update react-native 0.74.5 to 0.75.4

We think that the request cannot be sended.

If you are using React Native make sure to check User Script Sandboxing in Pods project (NOT ONLY <project name> project). It has been Yes by default.

I found a way to prevent the kernel from running the generator thus not starting services at all. The following kernel parameter has to be added :

systemd.getty_auto=no

Found this answer here.

As I'm using a Raspberry Pi 4, I added this parameter to the /boot/cmdline.txt file.

Another way to debug this is to simply modify a parameter or the emulator name in Android Studio. It will then launch from scratch, retaining its memory where wipe data will erase it.

WordPress plugins “W3 Total Cache” and “WP-Optimize” can conflict each other.

Also, WordPress “W3 Total Cache” and “LiteSpeed Cache” can conflict.

Or like…

My advice is: check WordPress plugins, which perform caching or minification.

auto_model = AutoARIMA(....)
fitted_model = auto_model.fit(train['y'])

# The parameters
p, q, P, Q, m, d, D = fitted_model.model_['arma']
# use them as inputs in a ARIMA model
auto_model_saved = ARIMA(order=(p, d, q), seasonal_order=(P, D, Q), season_length = m)

You can create a component VWOScript.tsx with the content as shown in the attached screenshot. (Please note: account_id has dummy value and you will need to update that with your account_id).

Once added in layout.tsx file the VWO SmartCode doesn't need to be added in _app.tsx. So this part can be safely skipped.

This demo public repo can be referred for an example integration: https://github.com/Ragnarrlothbrok/tailnext-Test/blob/main/app/layout.tsx

This behaviour is observed in the LLM Whisperer Python client and is due to the default encoding of latin-1 being set in the requests library (reference). There's a PR which helps pass and handle the encoding correctly which will be published as a release sometime this week.

PS: I'm from Zipstack and I've worked on LLM Whisperer.

This is code to fetch data from website & export data in to Excel with python simple code.

You may need to install required dependency's with pip command.

pip install requests pip install bs4 pip install selenium pip install pandas pip install openpyxl pip install xlsxwriter any help required with this code you can connect with me over mail

import requests
from bs4 import BeautifulSoup
from selenium import webdriver
from selenium.webdriver.common.keys import Keys
import time
import os
import pandas as pd

url = 'https://en.wikipedia.org/wiki/List_of_largest_companies_in_the_United_States_by_revenue'
page = requests.get(url)
soup = BeautifulSoup(page.text, "html.parser")
table = soup.find_all('table')[0] # You can set index for table 0 or 1 or 2 as in webpage there are total 3 tables & having same classname so far.
#print(soup)

world_titles = table.find_all('th')

word_table_titles = [title.text.strip() for title in world_titles]
#print(word_table_titles)

df = pd.DataFrame(columns = word_table_titles)

collumn_data = table.find_all('tr')

for row in collumn_data[1:]:
    row_data = row.find_all('td')
    indivisualRowData = [data.text.strip() for data in row_data]
    lenght = len(df)
    df.loc[lenght] = indivisualRowData
    #print(indivisualRowData)


from datetime import datetime
#current_working_directory = os.getcwd()
#print(current_working_directory)
#df.to_xlsx(r'/storage/emulated/0/Python Programming',index = False)
filename = datetime.now().strftime("%Y-%m-%d %H-%M-%S")
with pd.ExcelWriter( filename + ' Output.xlsx') as writer:
    df.to_excel(writer, index = False)

:deep(.q-expansion-item) {
  .q-focus-helper {
    visibility: hidden;
  }
}

work for me like above

I set the FLASH_ACR register appropriately and the problem was solved:

    rcc.cr.modify(|_, w| w.hseon().on());
    while rcc.cr.read().hserdy().is_not_ready() {}
    println!("Hse ready");

    rcc.pllcfgr.modify(|_, w| w.pllsrc().hse());
    rcc.pllcfgr.modify(unsafe {|_, w| w.pllm().bits(4)});
    rcc.pllcfgr.modify(unsafe {|_, w| w.plln().bits(108)});
    rcc.pllcfgr.modify(|_, w| w.pllp().div2());

    rcc.cr.modify(|_, w| w.pllon().on());
    while rcc.cr.read().pllrdy().is_not_ready() {}
    println!("Pll ready");

    dp.FLASH.acr.modify(|_, w| w.latency().ws9());
    while !dp.FLASH.acr.read().latency().is_ws9() {}

    rcc.cfgr.modify(|_, w| w
        .ppre1().div2()
        .ppre2().div2()
    );

    rcc.cfgr.modify(|_, w| w.sw().pll());
    while !rcc.cfgr.read().sws().is_pll() {}
    println!("pll selectected");

This should target the first unordered list below the selected anchor.

$(this).parent().children("ul").first().css({ "top": "200px" });

Calling FocusScope.of(context).unfocus(); before showing the dialog didn't solve the problem for me. The previously focused TextField was still getting the focus after closing the dialog.

So, I created a global function in an utility class. I call this every time I want to close a dialog. The focus doesn't go back to any focusable widget after closing the dialog.

void closeDialog(BuildContext context) {
    Navigator.of(context).pop();
    FocusScope.of(context).unfocus();
}

Actually you don't need to determine image size for this specific code and keras will itself find out the input size based on input size of the whole network and previous layers.

But if you wish to know what is the input shape for the layer, after the first convolution layer the input shape will be (IMAGE_WIDTH - 4, IMAGE_HEIGHT - 4, 32) because you have 32 channels and used kernel size of 5. And after the pooling layer the height and width will be divided by two as you mentioned.

And the number of nodes in the dense layer can be determined arbitrarily.

message.entities only contains metadata right? Not the actual user data ?

@dp.message(Command("buy"))
    @UsOper.public
    async def buy_item(message: Message, bot: Bot):  # Add bot parameter
        try:
            text_words = message.text.split()
            
            if len(text_words) == 3:
                username = text_words[1].replace("@", "")
                chat_member = await bot.get_chat_member(message.chat.id, username)
                user_id = chat_member.user.id
                item_title = text_words[2]
            elif len(text_words) == 2:
                item_title = text_words[1]
                user_id = message.from_user.id
                
            await AssortOper.buy_item(item_title, user_id, message.chat.id)
            await message.reply(f"Item {item_title} purchased!")
        except Exception as ex:
            print(ex, "__buy_item")

The root thread container of the JVM in the ThreadContainers class maintains a list of all virtual threads by default (this behavior can be disabled using the jdk.trackAllThreads system property, before java 21 this defaulted to false, I think). Unfortunately, the ThreadContainers class, as well as the ThreadContainer class, both belong to the jdk.internal module and are therefore inaccessible. All other classes using these are also part of the jdk.internal module or don't give us access to this list of threads.

Additionally, the ThreadContainers class maintains a list of all executor instances, including those that create virtual threads, which internally have a list of all their virtual threads, but this list of executors is also inaccessible.

Even the ThreadDumper class, which can now create thread dumps including virtual threads, is inside the jdk.internal module.

The documentation of ThreadGroup and other classes and methods you mentioned state they do not return virtual threads.

I have used latest module-federation plug in which solved this issue @angular-architects/[email protected]

Please refer the issue here
https://github.com/angular-architects/module-federation-plugin/issues/646

Thanks to @manfredsteyer who fixed this issue and published the new version of module federation.

It appears that this is from inadequate version of Google Play Services on the device: https://github.com/googlesamples/mlkit/issues/846

Facing same CORS issue but only in production that too for some devices. Tried resolving this and searched for solutions but failed to resolve issue. Cant able to see any solution to this issue

After some trial and error, this worked:

strURL = "\\\\xyz2112.internal.rush.com\\Cygnus\\" + ((Label)GridView_Attachments.Rows[index].FindControl("Question_Attachments")).Text;

Hopefully this helps someone else who might be trying to do the same thing.

I understand you want to customize Summernote's upload path to include the user ID instead of the date. The error occurs because the attachment_upload_to function receives different parameters than what you're expecting. Let me help you fix this. This are steps you can follow to solve problem

1.Creates a custom attachment model that includes user information 2.Modifies the upload path to include the user ID 3.Ensures the user information is available during file upload 4.Maintains the UUID-based filename for uniqueness 5.Provides a fallback for anonymous uploads

The files will now be saved in paths like:

ProjectName/media/django-summernote/User100/uuid-filename.png ProjectName/media/django-summernote/User200/uuid-filename.jpg

Remember to handle any existing files and migrations carefully if you're implementing this in a project that already has uploaded files.

if need any code snippet ,reach me; I will provide detailed code but I assure that above code will works ,cause its work for my domain !

Have a look at Timmy on GitHub it's an advanced image handling tool for WordPress and specific Timber. Althoug the docs say they don't know, if external resources are working without hassle I'm very confident it will work with some configuration on the Timber side as the docs state

You can find a complete example running on FlutterFlow here : https://app.flutterflow.io/project/a-r-flutter-lib-ipqw3k

Only this worked fro me

// next.config.js
const nextConfig = {
  webpack: (config, { isServer }) => {
    // Only attempt to resolve fs module on the server side
    if (!isServer) {
      config.resolve.fallback = {
        fs: false,
      };
    }
    return config;
  },
};

module.exports = nextConfig;

The below query accumulates the total "time covered" by the metric data points over the visible time window.

1 rem = 16 pixels.

In this section "h2" is 30px(that is 1.875 rem) and "a" is 16px(that is 1 rem)

I would suggest initializing the variable with null:

MyType? myVar = null;

You can then check whether it has been set to an non-null value using:

var isSet = myVar != null;

The num parameter is a suggestion to Google, and in some cases, Google may not return the exact number of results specified in the num param.

The other possibility is some results were missing due to an issue in langchain.

I work for SerpApi so if you want us to look into what might have happened on the SerpApi side, please contact us through our live chat on https://serpapi.com/ or write to us at [email protected]

We'll be happy to help.

I want to be able to double click to open my saved queries from my File Explorer into the current SQL environment I have open. Not a new damn instance.

The npm package dynamo-repo simplifies working with interfaces and types and I found it to be the simplest and easiest one to work with.

This other answer has some explanation and examples: use-type-at-dynamodb-output