As others have said, this is not recommended. But one approach is to leave the controller pathless and set on each route

@Controller('user')
...
@Get('me')
@Get(':id')

You can do

@Controller()
...
@Get('profile')
@Get('user/:id')

I would need to know the content of TextGenarateur component but it seems that you have another Form.Item or a native input inside, which is interfering with the parent Form.Item. I would try moving the other component outside the parent Form.Item.

So this thread got me curious. I linked my program, a full compiler and therefore a non-trivial program, with and without -static. I got:

dynamic: 5,552,800 bytes. static: 6,428,536 bytes.

Doing this with hello world got:

dynamic: 15,960 bytes static: 785,360 bytes

So yes, similar to the OP above in terms of difference. The "big honkin'" program was 865736, but obviously is far less different in relative terms than the simple hello world. In both cases, it seems to be the libc implementation that is most of it. Even in the large program, libc is the biggest import.

Now, what is the net impact of this? In modern demand paged environments, the OS will not load pages that are not executed, so the main memory cost of statically linked sections is not that great. The net cost, then, is disk space, of which at say a current disk drive of 2tb, $70 (Amazon) is:

$70/2,000,000,000,000*865,736 = 0.00003 or 0.3 thousanths of a cent, or approximately the going rate of ant spit.

Something to think about.

Hi Guys I figured it by

labelNameIndex: QL700.ordinalFromID(16),

16 is for W62

I had to import this:

import 'package:another_brother/label_info.dart';

Rest of code:

  Future<bool> setPrinterInfo(PrinterInfo printerInfo) async {
mPrinterInfo = printerInfo;
mPrinterInfo._labelName = QL700.W62RB;
print(printerInfo._labelName);
return true;

}

  final _printer = Printer();
  final _printInfo = PrinterInfo(
printerModel: Model.QL_810W,
printMode: PrintMode.FIT_TO_PAPER,
isAutoCut: true,
port: Port.NET,
paperSize: PaperSize.CUSTOM,
labelNameIndex: QL700.ordinalFromID(16),
// customPaperWidth: 62,
// customPaperInfo: CustomPaperI1nfo.newCustomRollPaper(Model.QL_810W, Unit.Mm, 62, 0.0, 0.0, 0.0),
 );

for MongoDB use

services.AddDbContext<DBContext>(
    options => options.UseMongoDB(<ConnectionString>, <DatabaseName>),
    ServiceLifetime.Transient
);

Where ConnectionString is:

$"mongodb+srv://{UserName}:{Password}@{ClusterName}/{AuthDatabase}?retryWrites=true&w=majority&appName={AppName}"

From the InstallShield online help documentation

"The Redistributables view is where you add InstallShield prerequisites to Basic MSI and InstallScript MSI projects. The Prerequisites view is where you add InstallShield prerequisites to InstallScript projects."

You'll want to make sure that you have the prereq downloaded in your local InstallShield directory. The UI also provides a method for downloading them to your local directory.

Hope my experience can help.

Here is my scenario. I have VS2022 with SSDT. My SSIS project work properly and able to hit Breakpoint of Script task. However, it failed to start after upgraded to VS2022 V17.13.2. I have tried all solutions mentioned above, but still not able to start the debugging in VS2002.

Finally, I solve it by uninstall the SSIS Extension and reinstall it again. The breakpoint in Script task can be hit again in debugging mode. Here is the steps:

1. Start VS2022 and click "Continue without code"
2. Click "Extensions" and "Manage Extensions"
3. Find "SQL Server Integration Services Project 2022" in "Installed", and then click "Uninstall"
4. Restart computer
5. Start VS2022 and go to "Manage Extensions" again
6. Search "SQL Server Integration Services Project 2022" in "Browse"
7. Click "Install", download latest SSDT and install again.

Hope this solution can help. Good luck.

I had this issue while doing the initial mvp work and working with the developer's sandbox. I finally got my payments to go trough by going to the developers dashboard, going to Rest API apps, selecting the app's name, scrolling down to Features and selecting the checkbox for the payment methods I needed.

Support for "Soft Components" (which would accomplish what you're looking for) was removed from October CMS v2.0+, but still exists in Winter CMS.

This can happen if the last column of the last row in your csv file does not have whatever you used as a row terminator. In your case 0x0a For example ColumnA,ColumnB0x0a (Header column) Value1,Value_20x0a Value3,Value40x0a Value5,Value6

In this case SQL will not load the row that contains Value5 and Value6.

According to whois.godaddy.com, Jansys.net continues active and was current as of 01/2025 showing UK presence. No contact info but someone is paying the freight.

Simply use this package instead

flutter_barcode_scanner_plus: ^3.0.8

it handles newer Flutter versions & device compatibility better. Save yourself the debugging headache!

Deactivate unneeded plugins -- one at a time, testing that the site still works and refreshing the Site Health page each time. In my case, it turned out it was a plugin called WP CSV, a backup/export tool, but every site usually has different plugins and would need to check each one.

Sam Erde, you're a genius! Thank you!

Downgrading Ubuntu version to 20.04 also worked for me when needing to use php8.3

pool: vmImage: ubuntu-20.04

Because it considers it an empty or unknown value, so it sets any type of value for it. You can skip that by specifying its type through the code.

Any chance that the servers that are failing to connect are IIS servers installed on WS2019?

Here the problem is result.alternatives[0].words, which contains all the words from the previous transcript also .

Using the identity helper in AppView

$this->loadHelper('Authentication.Identity');

To get the id user logged is

$this->Identity->get('id');

More in https://book.cakephp.org/authentication/3/en/view-helper.html

Try looping through your array and checking whether array[x+1] = array[x] + 1. If true, skip to next number. When it hits false, save the string with the two endpoints and continue. Join all the strings at the end.

If you're using Vite, dont forget to add following setting in your vite.config.ts :

export default defineConfig({
  plugins: [
    react({
      jsxImportSource: '@emotion/react',
    }),
  ]
})

It allowed me to fix that issue.

    Hover:
  ShowAKA: Yes

Diagnostics:
  UnusedIncludes: Strict

if:
    PathExclude:.*\.cpp
    CompileFlags:
        Add: [-std=c99, -xc]  
        Remove: [-std=gnu++2b]
        Compiler: clang

I have the same issue in the Android Studio Meerkat we don't have solution fix issue login Google. We can not use to Gemini in the IDE

I have used the BackdropClick = false in the Dialog options like that:

OpenDialogAsync(_maxWidth))" Variant="Variant.Filled" Color="Color.Primary">Add New Stock

@code { private readonly DialogOptions _maxWidth = new() { MaxWidth = MaxWidth.Medium, FullWidth = true, BackdropClick = false };

protected override void OnInitialized()
{
    Console.WriteLine("Starter component loaded!");
}

private Task OpenDialogAsync(DialogOptions options)
{
    var parameters = new DialogParameters<StockDialog>
    {
        { x => x.ContentText, "Your computer seems very slow, click the download button to download free RAM." },
        { x => x.ButtonText, "Download" },
        { x => x.Color, Color.Info }
    };

    return DialogService.ShowAsync<StockDialog>("Custom Options Dialog", parameters, options);
}

}

Simplay use this package instead

flutter_barcode_scanner_plus

For the lazy:

import cv2

# init display before importing av fixes future imshow calls
cv2.namedWindow("init_display")
cv2.destroyAllWindows()

import av

The answer ended up being simple, although I'm not sure how 'correct it is:

Text(userEmail != null ? userEmail! : 'No Session Info'),
...
Text(userId != null ? '${userId!.substring(0,16)}...' : 'No Session Info'),
...

Simply adding a null check on the two textfields resolved the issue; now when the user clicks Delete Everything, their account and all associated data is deleted, they are logged out globally, and the UI pops back to the login/new user view automagically.

min-[780px]:flex-row this works now!

see playground

I confirm. If the SDK version in the pubspec.yaml file is set to 3.7.0, then trailing commas are automatically removed. If the SDK version is set to any earlier version, then the previous code formatting is restored.

Here is a link to a nice article about the formatting changes: https://codewithandrea.com/articles/new-formatting-style-dart-3-7/

And here is the link to the official proposal: https://github.com/dart-lang/dart_style/issues/1253

Well you're still going to need to have the mock location ability to make certain changes to certain IP addresses. And or the ability to change your IP address. So instead of being restricted between let's just go to hypothetical here 64 to 65... You're going to be able to open yourself up from going from an IP starting with 2.00 all the way up to whatever number you want to go to. So sometimes not having a open location if you will will limit your IP range. So mock location is going to need an application to go in there at some point. That's what you're going to have to figure out what that is. In my case to suit my purposes to circumvent around the IP address that I actually have I use fake GPS or fake location if you get the name of the app I just look at it I don't remember it anymore. It has like a yellow emoji is part of its logo. Yes it's going to tell you only works for older versions of your firmware but however that is untrue. Make sure when you set your location you add it to favorites and don't forget to hit the Green arrow before you do that. Then go to Google to verify the location. And then work on your IP differentials in conjunction with the mock after apps. Again you're going to have to figure out how are you going to go past this point to either do a specific or a random range. But for definitely your phone's going to have to be rooted otherwise and then you're going to need an IP masking program or an IP spoofing program. I would just go through proxy websites which looks like Google search bar but it's actually an address bar. The circumvent that way. We don't have much information on your device or or what have you so this is the best I answer I can give you

Choosing between a relational database (RDBMS) and a graph database depends on your data structure and query needs.

A graph database organizes data as a network of entities and relationships. It uses mathematical graph theory to store and operate on data relationships.

Relational databases hold information in tables with rows and columns. Unlike graph databases, they tend to become inefficient in operations involving complex data relationships because they require several data table lookups. Here's a detailed article that talks about Graph Database Vs. Relational Database.

This is what limits I see in my organization free plan. I don't see anything about Orgs:

edit: spelling

Maybe this question is still in business. Try:

TextField(...) .autocorrectionDisabled(true) .keyboardType(.webSearch)

This will keep support for Emoji and UTF-8 keyboards and if there are negative sides I didn't find them except for key "Go" instead of "Enter" 🤣

Yes, in my case MatTableModule import was missing.

Not sure if this is the most efficient method, but I have a version that uses a fairly small (33 element) lookup table and seems to work pretty well. Haven't benchmarked it but it uses no loops, branching or divisions. It does use a count-leading-zeros function whose efficiency I can't comment on.

typedef int fixed_point;
const int FRACTIONAL_BITS = 16;
const fixed_point ONE = 1 << FRACTIONAL_BITS;

vector<fixed_point> invSqrtLookupTableFixed;

// Initialize the lookup table
void initializeInvSqrtLookupTable() {
    if (invSqrtLookupTableFixed.size()==0) {
        invSqrtLookupTableFixed.resize(33);
        for (int i=0; i<=32; i++) {
            unsigned long long A = 1;  // basically an unsigned very big fixed point. we use 64 bits because  there will be overrun at i=32
            A = 1<<i;  // our positive fixed-point value which corresponds to the i'th element of the table. 
            double fixedPointValueAsFloat = ((double)(A))/((double)ONE);  // convert fixed-point to double
            double valueForTable = 1.f/sqrt(fixedPointValueAsFloat);  // get the inverse square root of our fixed_point. We could make other types of conversion tables by changing the formula
            invSqrtLookupTableFixed[i] = valueForTable*ONE;  // convert float value to fixed and store it in the table.
        }
    }
}

// Float inverse square root using interpolated lookup table
fixed_point floatInvSqrtLookup(fixed_point vectorLengthSquared) {
    // this uses a lookup table to get the 1/sqrt(lengthSquared) which is the value required to normalize a vector. Lenghtsquared is used because it is proportional to the magnitude of the input vector but doesn't require a sqrt() which the actual magnitude would require
    // with a different lookup table this could also return just the sqrt instead of the inverse square root

    //fixed_point fixedVal = vectorLengthSquared*ONE;
    unsigned long leadingZeros;
    _BitScanReverse(&leadingZeros, vectorLengthSquared); //Find the most significant bit.
    unsigned long long bitsA, bitsB;
    bitsA = invSqrtLookupTableFixed[leadingZeros];
    bitsB = invSqrtLookupTableFixed[leadingZeros+1];

    unsigned int giganticized = vectorLengthSquared<<(31-leadingZeros);  // shift the bits so our lengthSquared is now between  2.1billion and 4.2billion which is actually the fraction. 4.2b is where the hi table value is and 2.1b is where the low table value is
    unsigned int interp_percent_as_short = (giganticized-2147483648)>>16;  // now a fraction between 0 and 32767 representing 0->1. this is decoupled from any fixed_point definition

    unsigned long long ff = (bitsA<<15) + interp_percent_as_short * (bitsB-bitsA);  // our interpolation using interp_percent_as_int. everything shifted by 15 bits now that it's been multed by interp_percent_as_int (too big by factor of 32768)
    fixed_point finalFixed = ff >> 15;  // the value from previous fixed-point math produces a value 32768x too high. Divide by 32768 to make it a standard fixed_point. our final fixed value of 1/sqrt(lengthSquared)

    return finalFixed;
}

We have a tutorial which covers both Android and iPhone communication with Arduino Nano BLE https://github.com/Mohamadol/Flutter_Arduino_Bluetooth

I also got the same error as you, and found a simple fix. You just need to change as follows:

From localeId: 'ja_JP' to localeId: 'ja-JP'

Hope it helps you!

Apparently, adding cd /d "%~dp0" as pervious user suggested worked

If you want to package UE5 games for Mac, you must do so on a Mac.

Windows can only package games for Windows and for Linux. It cannot package games for Mac.

What you really want to do is to use source control, like Git or Perforce (or another SCM). This makes it very easy to share the code on multiple machines.

To reduce the time it takes you personally, you could also take a look at continuous integration techniques, but those can be expensive. CI trades money for time.

Given @jcalz link i was able to make it work (TS Playground link):

type A = {
    kind: "a"
    v: string
    f: (param: string) => void
}

type B = {
    kind: "b"
    v: number
    f: (param: number) => void
}

type RecordMap = { a: string, b: number };
type UnionRecord<K extends keyof RecordMap = keyof RecordMap> = { [P in K]: {
    kind: P,
    v: RecordMap[P],
    f: (v: RecordMap[P]) => void
}}[K];

Working example:

const instanceA: A = {
    kind: "a",
    v: "test",
    f: (param) => {
        console.log(param)
    }
}

const instanceB : B = {
    kind: "b",
    v: 4,
    f: (param) => {
        console.log(param)
    }
}



function j<K extends keyof RecordMap>(conf: UnionRecord<K>) {
    return conf.f(conf.v)
}
j(instanceA)
j(instanceB)

To fix this I had to use a "Upper Bounded Wildcard" on the parameter of the function which fixed the typing issue. So instead of

public void bar(List<Parent> parents) {
  parents.stream.forEach(parent::foo);
}

We changed it to

public void bar(List<? extends Parent> parents) {
  parents.stream.forEach(parent::foo);
}

Your GCP filter query can be transformed to this Azure query

az vm list --query '[?contains(name,'wkn')]|[?tags.wknhscale=='active'].{Name:name, RG:resourceGroup}' -o table

You can get more examples here: How to query Azure CLI command output using a JMESPath query

I had this same error and the problem turned out to be an outdated git install. I did not realize that an older git, installed by an older brew (macos), was higher in my os PATH than my latest git. Cleaned that up at the OS level (uninstalled old git; made sure latest 'brew install git; brew link git' was being used) and all was well.

Your problem statement is not clear with regards to the dot/decimal.

Doing the following will cast (round) the double as an integer then convert to character:

con.execute("""
UPDATE my_table
SET string_column = CAST( CAST(double_column AS INTEGER) as VARCHAR)
""")

If the intention is to trim the decimal entirely (as suggested by @Barmar):

con.execute("""
UPDATE my_table
SET string_column = SPLIT_PART(CAST(double_column AS VARCHAR), '.', 1)
""")

Someone please just end me. It would be the merciful thing. Ive been at this for 8 hours! I found it... I f$^#@ found it.

What it was: <index.html>

 <script defer="defer" src="/static/js/main.3362c51c.js"></script>

What it needs to be: <index.html>

Mind the missing leading slash, it was using root as the path instead of a local path.

 <script defer="defer" src="static/js/main.3362c51c.js"></script>

the same issue with my jfrog container also, getting "http 404 status -not found" images i used is docker.bintray.io/jfrog/artifactory-oss:latest and releases-docker.jfrog.io/jfrog/artifactory-oss

logs:

ubuntu@ip-10-0-0-172:~$ docker logs --tail 50 artifactory
2025-03-05T19:35:19.539Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 225 seconds with 5m0s timeout
2025-03-05T19:35:24.541Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 230 seconds with 5m0s timeout
2025-03-05T19:35:26.519Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 220
2025-03-05T19:35:26.523Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 220 failed with code : ECONNREFUSED
2025-03-05T19:35:29.544Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 235 seconds with 5m0s timeout
2025-03-05T19:35:34.548Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 240 seconds with 5m0s timeout
2025-03-05T19:35:36.563Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 230
2025-03-05T19:35:36.571Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 230 failed with code : ECONNREFUSED
2025-03-05T19:35:39.550Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 245 seconds with 5m0s timeout
2025-03-05T19:35:44.552Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 250 seconds with 5m0s timeout
2025-03-05T19:35:46.605Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 240
2025-03-05T19:35:46.608Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 240 failed with code : ECONNREFUSED
2025-03-05T19:35:49.555Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 255 seconds with 5m0s timeout
2025-03-05T19:35:54.560Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 260 seconds with 5m0s timeout
2025-03-05T19:35:56.650Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 250
2025-03-05T19:35:56.653Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 250 failed with code : ECONNREFUSED
2025-03-05T19:35:59.562Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 265 seconds with 5m0s timeout
2025-03-05T19:36:04.564Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 270 seconds with 5m0s timeout
2025-03-05T19:36:06.686Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 260
2025-03-05T19:36:06.689Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 260 failed with code : ECONNREFUSED
2025-03-05T19:36:09.567Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 275 seconds with 5m0s timeout
2025-03-05T19:36:14.569Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 280 seconds with 5m0s timeout
2025-03-05T19:36:16.724Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 270
2025-03-05T19:36:16.728Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 270 failed with code : ECONNREFUSED
2025-03-05T19:36:19.572Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 285 seconds with 5m0s timeout
2025-03-05T19:36:24.574Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 290 seconds with 5m0s timeout
2025-03-05T19:36:26.765Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 280
2025-03-05T19:36:26.767Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 280 failed with code : ECONNREFUSED
2025-03-05T19:36:29.576Z [jfrou] [INFO ] [3ac7e89852adb707] [security_keys.go:172          ] [main                ] [] - Master key is missing. Pending for 295 seconds with 5m0s timeout
2025-03-05T19:36:34.373Z [jfrou] [FATAL] [3ac7e89852adb707] [bootstrap.go:113              ] [main                ] [] - Security keys resolution errors: Failed resolving master key: failed resolving 'shared.security.masterKey' key; file does not exist: /opt/jfrog/artifactory/var/etc/security/master.key
2025-03-05T19:36:36.805Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 290
2025-03-05T19:36:36.808Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 290 failed with code : ECONNREFUSED
2025-03-05T19:36:46.844Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory, attempt number 300
2025-03-05T19:36:46.846Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - pinging artifactory attempt number 300 failed with code : ECONNREFUSED
2025-03-05T19:36:47.848Z [jffe ] [ERROR] [] [frontend-service.log] [main                ] - Error starting application - Error: Failed pinging artifactory for 300connect ECONNREFUSED 127.0.0.1:8046
2025-03-05T19:36:47.849Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - exit detected
2025-03-05T19:36:47.849Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - doing clean up
2025-03-05T19:36:47.849Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - unregistering from router
2025-03-05T19:36:47.851Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - client is already unregistered from router
2025-03-05T19:36:47.851Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - exit code : 0
2025-03-05T19:36:47.851Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - closing recurring jobs
2025-03-05T19:36:47.851Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - clear recurring job intervals
2025-03-05T19:36:47.851Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - remove recurring job intervals
2025-03-05T19:36:47.852Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - closing recurring jobs
2025-03-05T19:36:48.110Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - [HPM] Proxy created: /  -> http://localhost:8046/artifactory
2025-03-05T19:36:48.115Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - [HPM] Proxy created: /  -> http://localhost:8046/artifactory
2025-03-05T19:36:48.116Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - [HPM] Proxy created: /  -> http://localhost:8046/artifactory
2025-03-05T19:36:48.117Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - [HPM] Proxy created: /  -> http://localhost:8046/artifactory
Wed, 05 Mar 2025 19:36:48 GMT helmet deprecated helmet.featurePolicy is deprecated (along with the HTTP header) and will be removed in helmet@4. You can use the `feature-policy` module instead. at ../../../../opt/jfrog/artifactory/app/frontend/bin/server/dist/bundle.js:8047:24
2025-03-05T19:36:48.233Z [jffe ] [INFO ] [] [frontend-service.log] [main                ] - Waiting for Express to close all connections
ubuntu@ip-10-0-0-172:~$

please help me how to troubleshoot this error. Advance thanks

You can use the TokenRequestContext with AuthenticateAsync as per

Micosoft Doc - InteractiveBrowserCredential.AuthenticateAsync Method

So in you code you can do this:

var tokenRequestContext = new TokenRequestContext(_scopes);
AuthenticationRecord authRecord = await interactiveCredential.AuthenticateAsync(tokenRequestContext);

I finally found the reason. After several various tries, I noticed it was due to expo-dev-client module. It seems there are conflict modules for expo-dev-client and expo-camera. Anyway, hope this can be helpful for all you! Happy coding!

I really don't like this solution, but I added a field on the model: @attr() anotherModelSelected; and in the function that is setting anotherModel also set anotherModelSelected to true (and false when cleared). Then in the schema definition, ignored anotherModel and tracked anotherModelSelected instead.

I don't like it because it adds another field to the model when the actual field we WANT to test is already present in the model, but I'll roll with this for now...

%b2eprogrampathname% instead of %~dp0 does not the same as %~dp0.

Me aparece eso y me aparece q estoy baneado desde ayer y no se porque

Answer Update

Thanks to the helpful suggestions above, I managed to get the fonts working. However, in my case, I needed to apply the !important directive to the body font style to ensure it overrides any other font-family settings that might be present in my project.

Here’s my full working theme.ts:

import { createSystem, defaultConfig } from "@chakra-ui/react";

export const system = createSystem(defaultConfig, {
theme: {
    tokens: {
    fonts: {
        heading: { value: `'Bebas Neue', sans-serif` },
        body: { value: `'Poppins', sans-serif` },
    },
    shadows: {
        outline: { value: "0 0 0 3px rgba(225, 92, 66, 0.5)" },
    },
    },
    recipes: {
    input: {
        base: {
        _focus: {
            boxShadow: "outline",
        },
        },
    },
    },
},
globalCss: {
    "html, body": {
       fontFamily: "body !important",
    },
    "h1, h2, h3, h4, h5, h6": {
       fontFamily: "heading",
    },
},
});
export default system;

Explanation:

• Poppins is applied to all non-heading text globally by using the fontFamily style with the !important rule. This ensures that Poppins is applied regardless of any other conflicting styles.

• Bebas Neue is applied to the heading elements (h1, h2, h3, h4, h5, h6), as intended.

I hope this helps someone else who’s facing similar issues. Thanks again for the guidance!

Thanks to the pointer above, this is the fix:

function training_qv_anyx_training_gb($stmt) {
    $post_type = get_post_type();
    if ($post_type == "anyx-training") {
        return '';
    }
}
add_filter( 'posts_groupby', 'training_qv_anyx_training_gb');

I know this is a very old thread, but I'm having a similar problem that I can't figure out. In an Access query, I need to display a string representing the 3-character abbreviation of the previous month. I've tried Format(Month(Now())-1,"mmm") and only get "Jan", never the previous month. I have another field in the query where I need to display the long month name and used MonthName(Month(Now())-1), which works correctly.

This works if Windows Authentication can be enabled on the API.

Have the gMSA be the identity that the app pool runs under then set “UseDefaultCredentials” to true in your HttpClientHandler. Do not include an authorization header or credentials. The request will be made by the gMSA due to the app pool.

If you packaged up your bash script into the Terraform module, then you will want to treat it as an upgrade.

terraform init -upgrade

This will have Terraform grab the latest changes from your module.

Issue solved. It was not the event handling. jsonFormer interprets spaces as the begin of a new field.

This caused the error of the page.

Replacing the spaces by underscores in the cpp source e.g. obj_config[F("Average Period") to obj_config[F("Average_Period") helped.

Lesson learned. Do not use spaces when applying jsonFormer.jquery.js

Inspector of MS-Edge gives more details than Firefox inspector.

You're running into an issue with MySQL's ONLY_FULL_GROUP_BY mode, which enforces strict grouping rules. The error happens because MySQL requires all selected columns that are not part of an aggregate function (like COUNT(), SUM(), etc.) to be included in the GROUP BY clause.

Why Is This Happening? Your query includes:

ORDER BY wp_postmeta.meta_value ASC;

Since wp_postmeta.meta_value is not included in the GROUP BY clause, MySQL complains that it can't determine a single value for ordering.

How to Fix It? If GROUP BY wp_posts.ID is not strictly necessary, you can remove it. Try modifying your function like this:

    if ( 'anyx-training' === $query['post_type']) {
         $query['meta_key'] = "anyx-training-order";
         $query['orderby'] = "meta_value_num";
         $query['order'] = "ASC";
         $query['suppress_filters'] = false; // Ensures WP_Query doesn't suppress the meta query
    }
    return $query;
}
add_filter( 'query_loop_block_query_vars', 'training_qv_anyx_training', 10, 2 );

I tried all the above given solutions but didn't work for me. Just wrap your text input into a view and give flex : 1 to the view. It will work 100%.

Eu tive esse problema depois que limpei /android.

Quem está usando a biblioteca: "react-native-auth0" precisa configurar no diretório >>> build.gradleandroid/app/build.gradle>android.defaultConfig

Precisa adicionar esse trecho

manifestPlaceholders = [
   auth0Domain: "API_AUDIENCE", 
   auth0Scheme: "${applicationId}.auth0",
   appAuthRedirectScheme: "com.googleusercontent.apps.467142457325-huert0kl3t8i50pnio23j4umqgfrqvkj"
        ]

Local onde fica a "API_AUDIENCE" manage.auth0.com/dashboard

Feito isso roda :

npx expo prebuild

E

eas build -p android --profile production

have you tried to dispatch the event inside the line panel?

linePanel.addMouseMotionListener(new MouseMotionAdapter() {
@Override
public void mouseMoved(MouseEvent e) {
    
    buttonPanel.dispatchEvent(SwingUtilities.convertMouseEvent(linePanel, e, buttonPanel));
}

});

Name of baggage key in application.properties and in code is different.
my-token and my_token.
Coherent naming should resolve the issue.

Found the solution.. I missed an important install and the errors weren't making it very clear what I was missing.

I had to run the following command: curl -sL https://firebase.tools | bash

After this I could run the command from above answers, but I had to provide the project too:

firebase apphosting:secrets:grantaccess NEXT_PUBLIC_FIREBASE_API_KEY --backend xx --project xx

With --backend xx being the apphosting backend like @Alex Kempton was stating.

Tengo el mismo problema, alguien ha podido resolverlo?

Do you need to do it via the COM object because of further manipulation you want to do, or just open it for user interaction? If the latter, you can just use this

start-process excel.exe 'c:\path\to\excelfile.xlsx'

Principal Curve Analysis

Under development--I will expand this post over time whenever I have the opportunity.

This is an interesting one. Years ago I followed a strongly related discussion (and spent some time thinking about it).

Some clarification would be much appreciated. I suspect your raw data are not linestrings. GPS locations with timestamps instead? Please share some or extend the description. Also, please add the importance of actual routes (if present) for your project. Moreover, it is crucial to know your overall goal (further anlysis etc.)

Inclusion of streets/routes from map databases, if available, give valuable information about what each GPS track tries to approximate. Tracks can be smooth functions of time. Therefore, timestamps are important. If available, we should try to model autocorrelation, since the errors at point locations are most likely not independent.

It might be incorrect to sample points along the linestring objects if actual GPS data (point locations) are available.

TODO: Further discussion and references

1)

# list of sf-data.frames (linestrings) 
# to sf-data.frame with source-column id
sampled_routes = list(road_gps_1, road_gps_2, road_gps_3, road_gps_4)
d = lapply(sampled_routes, sf::st_cast, to='POINT') 
d = Map(`[<-`, d, 'id', value=seq_along(d)) |> 
  do.call(what='rbind')

2)

TODO: add disatvantages and limitations of transformation: CRS -> 2d-Cartesian -> CRS; ways to overcome it.

# sf-data.frame to plain xy-coords matrix 
M = 
  d |>
  sf::st_geometry() |> # _$geometry
  unlist(recursive=FALSE, use.names=FALSE) |>
  matrix(ncol=2L, byrow=TRUE, dimnames=list(d$id, c('x', 'y')))

3)

No fine (parameter) tuning yet.

# principal curve analysis 
f1 = 
  M |>
  princurve::principal_curve()

4)

4.1

# colour palette 
col = 
  d$id |>
  unique() |>
  length() |>
  palette.colors(palette='Set 1')

4.2

# xy-plot with averaged track (black)
M = cbind.data.frame(M, id = d$id)  
plot(M$x, M$y, col=col[d$id], pch=20, xlab='x', ylab='y', main='Cartesian')
lapply(unique(d$id), 
       \(i) with(subset(M, id==i), lines(x, y, col=col[i], lty='dashed')))
lines(f1$s[f1$ord, ], lwd=2)
legend("topleft", legend=unique(d$id), col=col, pch=20, lty=2)
princurve::whiskers(as.matrix(M), f1$s, col = "gray")

What are the reasons motivating a comparison to the actual route/road?

5)

TODO: Back-transformation (and plot)

Summary

TODO: ...

Notes

We use {sf} (already in use) and {princurve}.

Edge or Chrome are based off Chromium and their capabilities are command line arguments.

You will need to pass them with double hyphen -- as seen below

You may try to use String(localized:) to represent its own value.

let greetingKey = LocalizedStringKey("Greeting")
let localGreeting: String = String(localized: greetingKey)

I have the same problem, but I tryed according to the next steps. First, create de file in an editor that can support UTF8, write some non ANSI simbols and save; then open the file in Dev c++, automatically the file is in UTF8. Now give ideas for the use of fputc, fprintf, fgetc, etc.

SS64 has a separate section for Mac commands which maybe didn't exist when this question was first asked https://ss64.com/mac/date.html

From the examples:
Print the date as an ISO 8601 compliant date/time string:

$ date -I
$ date -Iminutes
$ date -Iseconds

Solution Found out via trial and error that the quotes ("") helped the Windows batch file to handle the expression, and since there was the use of single quotes at the start and end of ('mvn help:evaluate -Dexpression=project.version -q -DforceStdout') , the Windows CMD does not correctly interpret the code as it would.

As such, we can use a ^ to escape the special character = in Dexpression

Ammended run.bat

@echo off

:: Get the artifactId dynamically from pom.xml
for /f "delims=" %%i in ('mvn help:evaluate -Dexpression^=project.artifactId -q -DforceStdout') do set ARTIFACT_ID=%%i

:: Get the version dynamically from pom.xml
for /f "delims=" %%i in ('mvn help:evaluate -Dexpression^=project.version -q -DforceStdout') do set VERSION=%%i

:: Run the JAR file with the dynamically extracted artifactId and version
java -jar target\%ARTIFACT_ID%-%VERSION%.jar

To solve this, you can just run these commands in your terminal:

sudo find /workspaces/ -type d -exec chmod g+rw,o+rw {} \;
sudo find /workspaces/ -type f -exec chmod g+rw,o+rw {} \;

here find will locate all the files for the -type d and folders for the -type d and then execute the command chmod g+rw,o+rw {} on each one of them, while replacing {} with the location of the file/folder found by the find command.

@Kars mentioned that we need delayed() after query(). In my case, I needed delayed() BFFORE query().

 final connection = await MySqlConnection.connect(new ConnectionSettings(
    host: 'localhost',
    port: 3306,
    user: 'u1',
    password: 'p2',
    db: 'db_temp',
  ));
  await Future.delayed(Duration(seconds: 2));          // need this

  var results = await connection.query('select * from roles');

  print(results);
  for (var row in results) {
    print('${row[0]}');
  }

  // Finally, close the connection
  await connection.close();

In command mode (c), type:

:1,$d

if anyone is still interested in this topic here is some relevant information :

• We should not declare a custom field of class FilterSet in attribute Meta.fields.
• If we create a custom FilterSet class we should declare it in the view using the filterset_class attribute - the author of the post does not do that.
• The lookup declaration of the DateFromToRangeFilter field is provided automatically using the <field_name>_before and <field_name>_after lookup - so there is no reason to override this.

Let me also add a comment on how to declare filters in the view:

• on one hand you declare filtering search_fields, and on the other hand you do exactly the same in your FilterSet - why ? the sarch_field attribute provides us with lookup logic icontains by default - link
• as I partially mentioned you are declaring an attribute filterset_fields but you have created a custom object of type FilterSet - we should use either one or the other.

According to the documentation, it always sends back receipts and tickets in the same order as you send them. If you use a for loop (let i = 0; i < length; i++), you can use "i" to index into the list of expo tokens to get the token corresponding to the error.

FROM AWS -

Server-side encryption – Amazon S3 encrypts your objects before saving them on disks in AWS data centers and then decrypts the objects when you download them.

• this seems to me is "file" level encryption

All Amazon S3 buckets have encryption configured by default, and all new objects that are uploaded to an S3 bucket are automatically encrypted at rest. Server-side encryption with Amazon S3 managed keys (SSE-S3) is the default encryption configuration for every bucket in Amazon S3. To use a different type of encryption, you can either specify the type of server-side encryption to use in your S3 PUT requests, or you can set the default encryption configuration in the destination bucket.

-This means encryption at rest

Still nothing about stolen s3 encryption keys and what aws does with that scenario.

This answer is correct which is used based previous comments

STMCube IDE >>help >> STM32Cube Updates >> Connection to myST. Create or login to your ST account. Create new project

Also you can pay attention to urn encoded to base64. In Python, function base64.urlsafe_b64encode returns value with padding symbols "=" on the end. For some reason Autodesk can't handle it, so you have to manually .strip("=") it

did you found a solution? I have the same error after the implementation of Spread Sheet Importer for a fiori list report after a succesful implementation of another different app.

I agree with Puteri. As also stated here in this documentation that’s expected.

AlloyDB instances accept connections on two TCP ports:

• Port 5432, the default PostgreSQL port that applications use to connect directly to the instance.

• Port 5433, which connectors, including AlloyDB Auth Proxy use to connect to the instance.

If you have an outbound firewall policy, make sure it allows connections to port 5433 on the target AlloyDB instance.

How about something like this?

keys = np.union1d(a[:, 0], b[:, 0])

# Initialize result array with zeros - assume the 3 columns as output
c = np.zeros((keys.shape[0], 3))
c[:, 0] = keys

idx_a = np.searchsorted(keys, a[:, 0])
idx_b = np.searchsorted(keys, b[:, 0])

# Assign values where keys match
c[idx_a, 1] = a[:, 1]
c[idx_b, 2] = b[:, 1]

print(c)

"""
[[1.  0.2 0. ]
 [2.  0.5 0.4]
 [3.  0.8 0.7]
 [4.  0.  1.3]
 [5.  0.  2. ]]
"""

In my particular case, and all of a sudden, an extra parameter on the file_get_contents URL was causing this error. I believe something in my firewall software just got smarter about injections and started throwing the error without warning. I was adding a random variable to the URL to force a requery instead of taking the cache and I believe that somehow the random variable was seen as an injection attack.

This here solved the issue for me: https://stackoverflow.com/a/34214904

(Running Windows 11 on a USB Disk created with Rufus)

feature_names = scaler.feature_names_in_

les vengo a compartir una actualización:

repotrack --arch=x86_64 --destdir=/repos/offline-repo PACKAGE

DatePickerDialog(modifier = Modifier.verticalScroll(rememberScrollState()){}

This should fix clipping, attach scroll to dialog instead of DatePicker

Mount common package to volume

volumes:
  - ./common:app/node_modules/@common

Update webpack (or any other compiler) to transpile @common

exclude: /node_modules\/(?!@common)/,

I got this error while using the JSON plugin.
In my Struts action, I had parameters which were set up as Integers with corresponding getters and setters. My web application was using jquery post() to send the parameters as JSON which my Action class would then receive, however it kept resulting in this error. The solution for me was to change the member variables (and their corresponding getters and setters) from Integers to Strings.

You can easily do it on Hugging Face, but I tried for days in Colab, and it just won't work with any method.

The issue with that element ID is that its not unique but dynamic. It will always change when the page is either refreshed or when you first navigate to it at a different time or day.

You need to pick a static attribute or text content from the element to be able to locate it reliably every time.

The code from ser2571090 works perfectly for me to make queries, but I can't create an Account from the suds_client.service.create() method. Could you give me an example of how it is used in that library?

From: https://www.mathworks.com/help/matlab/matlab_prog/identify-dependencies.html

[fList,pList] = matlab.codetools.requiredFilesAndProducts('myFun.m');

i try many solution, add size of memory buffer and i dont know, why dot working for me. then i think if in postman i have a response successfull, the error is only in google chrome, i used brave and working. i think that some changed chrome.

Am trying to get this working, but am having issues getting past the Do until loop. Gets stuck in an infinite loop. Not sure if there's a better way over this? Tried looking and couldn't find anything else similar.

I was doing my searches using keyword slide. That only brough up carousel results. After using the keyword scrolling, I found this in another post:

html {
scroll-behavior: auto !important;

}

That solved the problem.

Para evitar que MongoDB imprima los registros de actualización del clúster en la consola en una aplicación Spring Boot con Spring Data MongoDB, puedes ajustar la configuración del logger para suprimir los mensajes específicos relacionados con las actualizaciones del clúster.

Solución:

Debes configurar los niveles de logging en tu archivo application.properties o application.yml.

1. Usando application.properties

logging.level.org.mongodb.driver.cluster=WARN

Esto establece el nivel de logs para org.mongodb.driver.cluster en WARN, lo que suprime los mensajes informativos sobre actualizaciones de clúster.

2. Usando application.yml

logging:
  level:
    org.mongodb.driver.cluster: WARN

3. Configurando en logback-spring.xml (si usas Logback)

Si tienes un archivo logback-spring.xml en src/main/resources, puedes agregar:

<logger name="org.mongodb.driver.cluster" level="WARN"/>

Explicación:

• org.mongodb.driver.cluster es el paquete donde MongoDB registra eventos del clúster.
• WARN evita que se impriman logs de nivel INFO o DEBUG, reduciendo la cantidad de mensajes en la consola.
• Esto no afecta otros logs importantes del sistema.

Con esta configuración, MongoDB dejará de imprimir esos registros molestos en la consola. 🚀

I've also faced this issue while doing aggregation. It turns out MongoDB aggregation has size limit of 16 mebibyte(16.7 MB) for every document in result or the cursor returns. Here is the docs which explains it. So closely examine you pipeline whether you are fetching a big documents or lookup from another collection. Hope this will help you)

Peace.

this looks like deprecated in new version

Late simple answer with inline-if according to the last edited question so far, thanks @T.J.Crowder :

var fomattedDate = (moment(myDate).isValid() ? moment(myDate).format("L") : "");