It is possible in MATLAB 2024_b.

Given two axes ax1 and ax2, you can simply do

linkprop([ax1.YAxis,ax2.XAxis],'Limits')

I guess you are running is on raspberry pi 4 with 2gb right now? I did the same like you before and turn out that raspberry pi can not handle "heavy code" and i think some of the package inside virtual environment is new which use more ram. I hope it help.

Maybe write a C++ version could potentially save more ram usage and more efficient code

TL;DR

As you wrote, the dataFrom field requires JSON format. To get the raw secret value you can remoteRef.

Check my answer to the similar post - https://stackoverflow.com/a/79421344/29483174

In case someone ends up here, having the same problem with two service workers: For me that was in fact what caused the reload loop and I ended up just combining both service workers. A simple way to do this seems to be to just use importScripts in one service worker to load the other.

If you are using workbox, I can recommend having a look at the importScripts: option that workbox provides, which allows you to include for example the firebase-messaging-sw.js in the workbox service worker. You end up with a single service worker which can be used for both tasks.

I was using VitePWA, so for me it was:

vite.config.ts:

...
VitePWA({
  workbox: {
    importScripts: ['/firebase-messaging-sw.js'],
  }
}
...

and then passing the vite service worker registration to firebase messaging:

...
await firebaseMessaging.getToken(
  messaging,
  { vapidKey, serviceWorkerRegistration: swRegistration }
)
...

As you already know, dear myself, the only existing way to keep a file online and available for a millennium and more, and also make so nobody can ever take it down as well is to upload it to a blockchain using the Ethereum Virtual Machine File System you have invented.

Clearly that doesn't assure the file will stay online for a whole millennium, but only until the blockchain on which you upload it on will be alive.

Yet if in a millennium greed and money will still be something, your file will probably say online.

In my case, it was my organization's AppLocker that was causing esbuild to not run. I had to get them to whitelist it.

Your test program is primarily written for executing single-threaded FFTs only. And the single-threaded FFT performance of amd-fftw is on par or better.

For multi-threaded FFT tests, you need to modify your test program. Also, slight corrections are required to your compilation command.

Please refer to the below link where your question has been answered in detail: at https://github.com/amd/amd-fftw/issues/19

as setup.cfg with version required in my ci/cd my solution is

[tool.hatch.version]
path = "setup.cfg"
pattern = "version = (?P<version>[^\n \r]+)"

I would then put the data in the power pivot data model (or Fabric Semantic Model) and do CUBEVALUE formula on it. Here is a good link on CUBE functions: https://dataempower.net/excel/excel-cube-functions-explained-cubevalue-cubeset-cubemember/

Following @shshi009, once you are on this setting panel (Build,Execution,Deployment > Annotation Processors) select your application module and in the right side activate "Obtain processors from project classpath" - which is deactivated by default.

When I use the following settings:

QUIET = YES
MACRO_EXPANSION = YES
PREDEFINED = "QObject=QObject /** @note Supports Signals and Slots */"
PREDEFINED += "Q_OBJECT="

I get as a result:

(Note: current doxygen version is 1.13.2)

Does your invoked input match the provided regex pattern of ^(\|+|User:)$?

In case anyone is wondering the alpha channel for the image was lost when it was converted to PixelFormats.Gray32Float.

I am using .NET 8 and developing a .NET MAUI Blazor Hybrid app which connects with my ASP.NET API

What our uncle Bill suggests (and works great) is to create an API Service:

Create your service class:

public class APIService : IAPIService
 {
     HttpClient _httpClient;
     JsonSerializerOptions _jsonSerializerOptions;
     Uri _baseURI;
     public APIService()
     {
         _httpClient = new HttpClient();
         _jsonSerializerOptions = new JsonSerializerOptions
         {
             PropertyNamingPolicy = JsonNamingPolicy.CamelCase,
             WriteIndented = true,
         };
         _baseURI = new Uri("https://localhost:7148");
     }

     public async Task<bool> POSTCredentialsAsync(LoginCommand command)
     {
         var response = await _httpClient.PostAsJsonAsync(_baseURI + "/login", command);
         if (response.IsSuccessStatusCode)
         {
             return true;
         }
         return false;
     }

     public async Task<bool> POSTRegistrationAsync(RegisterMarket command)
     {
         var response = await _httpClient.PostAsJsonAsync(_baseURI + "/register", command);
         if (response.IsSuccessStatusCode)
         {
             return true;
         }
         return false;
     }
 }

like that above.

A Interface (for dependency injection in pages, blazor pages uses @Inject):

  internal interface IAPIService
  {
      public Task<bool> POSTCredentialsAsync(LoginCommand command);
      public Task<bool> POSTRegistrationAsync(RegisterMarket command);
  }

Lastly, in MauiProgram.cs

  builder.Services.AddScoped<IAPIService, APIService>();

Works really well in my apps

And you can handle the responses in another source file Hope it helps Thanks in advance

Microsoft oficial reference: https://learn.microsoft.com/en-us/dotnet/maui/data-cloud/rest?view=net-maui-9.0

check this BMC post about it, hope it helps: https://community.bmc.com/s/article/Control-M-for-Advanced-File-Transfer-File-Watch-Job-may-not-find-the-file-on-remote-FTP-when-the-directory-listing-contains-many-files

Set scrollEnabled={false} for one of the lists.

This is how my issue was solved, had to install it manually on Amazon Linux 2023.

https://github.com/amazonlinux/amazon-linux-2023/discussions/417#discussioncomment-6724153

The reason my os.py didn't work was because it is a frozen module in python 3.13. The same code would have called the custom os in python 3.10 as stated by user2357112 in comments. I tried my code with re which is not a frozen module in python 3.13 but is present in sys.modules and it called the custom re file.

So, it is true that because os was present in sys.modules the custom file was not loaded. And later on as described in my import process, the frozen module took preference over the custom one.

So, the reason for my problem is that in the UpdateUserCommandHandler class, I update the user, including their UserName, which in the Identity database is literally a copy of the Email column. Digging into how the login endpoint works (which comes from Identity), I discovered that the login process searches for the user by their UserName rather than their Email: documentation.

This is very misleading when using Swagger because the "example value" suggests entering an email address, which is confusing. By default, if no changes are made to the user, the UserName indeed receives the email address as a copy of Email. However, since I update the UserName, entering the email address during login results in a 401 Unauthorized error. On the other hand, when I use the user's UserName for login, everything works correctly.

Check out '@_disfavoredOverload'. It's not an official attribute (as evidenced by the _), but it's available for now and may become official in the future.

you is the experience and share the sure to opinion them Making

I have discovered workaround:

dpg.set_axis_limits(x_axis, 0, new_limit)
dpg.set_axis_limits(y_axis, 0, new_limit)

dpg.split_frame(); # important to call 

dpg.set_axis_limits_auto(x_axis)
dpg.set_axis_limits_auto(y_axis)
    

A Description of MySchool My school is a place that feels both fun and challenging, and it’s where I spend most of my time. It’s located in a quiet neighborhood with plenty of green space around it, so I can always take in the fresh air during breaks. The building itself is modern, with big classrooms and lots of windows that let in sunlight. There’s also a spacious courtyard where students hang out during lunch or after school.

One of the best things about my school is the teachers. They’re really passionate about what they teach and make learning interesting. Whether it’s history, science, or English, they find ways to make lessons interactive. For example, in science class, we get to do experiments, and in English, we sometimes act out scenes from books, which makes everything more fun. The teachers also care about how we’re doing outside of class, always asking if we need help with anything or just to chat if we’re feeling stressed.

My school also has a lot of activities that help balance out the schoolwork. There’s a sports program, art clubs, and music groups for anyone interested in trying something new. I’m part of the basketball team, and we practice a lot, but it’s always a great way to unwind after school. We also have school events like talent shows, sports days, and even school dances that everyone looks forward to.

The students at my school come from all walks of life, but everyone seems to get along. There’s a real sense of community, and people respect each other’s differences. The school encourages teamwork, kindness, and making sure no one feels left out, which makes it a good place to be.

Overall, I really enjoy being a student at my school. It’s not just about studying; it’s about growing, making friends, and discovering new interests. I’m grateful to be a part of a school that helps me get better at things I care about and supports me in the process.

Azure Functions Flex Consumption has indeed a limit of one function app per plan. The Azure Function Limits documentation has been updated to reflect that. Because the concurrency based scaling of Flex Consumption aims to be deterministic, the product group decided not to allow for multiple function apps in the same plan all voting independently to scale. You can still have different triggered functions inside the same Flex Consumption function app though, and these would scale into their own instances as described in per-function scaling.

You must install ASP for IIS as this link:

In Control Panel, click Programs and Features, and then click Turn Windows Features on or off. Expand Internet Information Services, then World Wide Web Services, then Application Development Features. Select ASP, and then click OK.

Then you can see ASP in IIS websites.

In IIS 8.5 or 10, select your project, you can see the options in the right hand side. In that under the IIS, you can see the ASP option.

Navigate away from the option, in the right hand side top you can see the Actions menu, Select Apply. It solved my problem.

Suggestion: without actual examples we can only speculate. The fact you still get dates implies your regex is not correct. If you skip content because of a pattern are you catering for the adjustment. Perhaps substitute the skipped pattern with 'whitespace'. If you do not then the doc flow is all over the place, you need to retain the doc structure.

An alternate to the UNIT=u, REC=rn form is as follows: READ( u 'rn … ) iolist.

Fortran 77 Language Reference Part No.: 802-5662-10 Revision A, December, 1996 SunSoft, Inc. Fortran 77 4.2

https://docs.oracle.com/cd/E19957-01/805-4941/805-4941.pdf

did it work? I am stuck with the same issue.please help.

You must configure an OAuth consent screen before using an OAuth 2.0 client ID. However, if setting up your OAuth consent screen does not solve the problem, try it again after a day or two, as it has worked for some users based on this related thread. Additionally, I suggest reviewing again the OAuth 2.0 setup documentation from Google Cloud Platform Console Help, as you might have missed something.

You can use PropertyNamingStrategies class, because PropertyNamingStrategy is deprecated. ObjectMapper mapper = new ObjectMapper(); mapper.setPropertyNamingStrategy(PropertyNamingStrategies.SNAKE_CASE);

I can also confirm that this works via REST and Json configuration:

"basic_constraints": {
    "ca": true,
    "path_len_constraint": 0
},

The key is realising the attributes are named to match the RFC replaced with snake_case: https://datatracker.ietf.org/doc/html/rfc5280#appendix-A

I had a similar experience when I resumed working on my project on Android Studio after several months pause. I noticed that after upgrading to Android Studio Ladybug I could not start any of my virtual devices already setup in the Device Manager.

I tried many things, including deleting the devices, creating new ones, uninstalling Android Studio, reinstall SDK Tools, etc. but to no avail.

In my case I noticed that my graphics driver was updated recently. I am also using Windows 10.

I rolled back the driver to the previous version and now the emulator works again. The following is what I did:

• Right-click on Start menu and then select Device Manager
• In Device Manager select Display Adapters
• Select the graphics card for your system
• Open Properties
• Select Driver tab
• Click on Roll Back Driver

Not sure this is specific to my case as I have an older laptop, but perhaps you could give it a go if you think it could help?

If you want to run your localhost on a different port you need to change your vite config file (vite.config.ts)

export default defineConfig({
  server: { port: 8080 },
  ...rest of config
});

This is appropriate markdown. Every markdown needs a \n beforehand. Answered here. Github API Create issue Markdown not rendering

 body: `
            \n ${response?.review} 
            \n Severity: ${response?.severity} 
            \n \`\`\`suggestion
            \n ${response?.suggestion}
            \n \`\`\`
          ` ,

I'll answer my own question, playing around with substitue-path at the end, I realized that although the directories changed, the path that gdb prints when you execute 'bt' does not get updated with the new path. Not sure if that's considered a bug? But, if you go into the frame, you will see source data.

So lesson of the day, don't assume that substitute-path failed because 'bt' still shows the old path.

Untested:

L1_valid_entry foo;

unsigned int n = *(unsigned int *)&foo;

Can you elaborate on how you looked at the raw data? Did you enable features that show encoded characters (e.g., a line end would show up as \r\n for windows text files.)

That appears to be utf-8 encoding (perhaps of an em-dash or something else which 'looks' normal). Is it in the expected encoding format?

One way to debug this would be to split the file-- remove the first five lines, and see if it reads in. If so, the issue is being caused by something in the first five lines (etc.) With csvs, that can be the result of richer text in the header rows. It's not elegant, but it might help you learn more about a problem like this.

IN USING XD: Did anyone figure out how to fix this? Does the background color need to stay the color of what the text is top of? Then do we use a colored box with text on top for a background color - instead of making the background a color?

i was developing on http://127.0.0.1:3000 , my mistake was i did set my uri in google cloud console redirect uri to be http://127.0.0.1:3000 when i used http://127.0.0.1:3000/api/auth/callback/google it worked!

Press

Ctrl + Alt + B

while in VSCode

In modern browsers if you set the name="sameNameAllRows" on

<details>

it will only allow one item to expand at a time.

Ran into same issue on local machine today. After realising from your own answer that switching to Automatically manage signing works, I changed provisioning profile to "match development" from match AppStore under XCode and the application can be installed via flutter run --release too.

I have similar question: even if I add "--names-only" to the request like:

apt search --names-only bind

I received very long list inadequate results consisting of, among others, e.g.:

[...]elpa-bind-chord/jammy[...]
gir1.2-keybinder-3.0/jammy [...]
libbind-config-parser-perl/jammy[...]

19 pages... I don't get why. Looking for the explanation.

According to https://github.com/tqdm/tqdm?tab=readme-ov-file#nested-progress-bars and https://github.com/tqdm/tqdm/blob/master/examples/parallel_bars.py,

    with futures.ProcessPoolExecutor(
        max_workers=PROCESSES,
        initializer=tqdm.tqdm.set_lock,
        initargs=(tqdm.tqdm.get_lock(),),
    ) as executor:

to share the same tqdm.tqdm._lock = TqdmDefaultWriteLock() among the processes.

How do you determine the smart contract state doesn't change ? I'm also not seeing where "client" is being setup, is it created outside of your function ? It's not passed as a parameter.

This exact error message is often the result of a problem with the AD account you are using to connect.

Ensure the account is not locked on the domain controller.

Follow these steps until you identify your issue (skip steps that you already have done):

1. MOST COMMON: Enable Apple Sign in and make sure Apple Sign in shows up when "All" is selected, not just "Debug" or "Release" (unless intentional). 2. Double check you are signed into correct team name and bundle identifier and that your bundle id is registered with the correct team. If you have multiple apple accounts, its easy to mix these up.

1. Make sure your entitlements are correct. FIRST - check which ones you are using and if they . You can either use 1 entitlements file for all 3 environments or 1 for each. NEXT - make sure apple sign in is enabled in the entitlements file that you checked in FIRST step. Here is an example of Runner.entitlements with apple sign in enabled.

   aps-environment development com.apple.developer.applesignin Default

2. Make sure there is no error on your provisioning profile

3. If running on mac, note that you will need to edit entitlement files in the macos folder to have apple sign in. See code change screenshot below that was added to DebugProfile and Release entitlements file within the macos folder.

I am running into the same issue. SpeechRecognition.continuous works on desktop and Safari mobile (iOS) but not on other browsers nor on Android devices.

This answer is about a workaround and seems to be pretty precise (in addition to be the only way to do it).

After several times adding <base href="/xxx/"> in the index.html and "deployUrl": "/xxx/", of my angular.json /xxx/ being the directory to which the deployed site points, I still had the same problem. This post is what definitely allowed me to resolve the problem.

This issue occurs when using git-bash on Windows.

The git-bash sees the last argument of the command ng build --configuration development --base-href /xxx/ as a path relative to its binary folder and prepends the argument with that (it converts the "seems-to-be" relative path into an absolute path).

So, I used PowerShell instead of Git-Bash and the issue was gone.here is the stack overflow post which allowed me to solve the problem

I discovered these Examples which helped a lot.

We solved our issue by using App Roles and combining them with security groups in Microsoft Entra.

Then, in our Program.cs we replaced

builder.Services 
       .AddAuthentication(IISDefaults.AuthenticationScheme)

with

JwtSecurityTokenHandler.DefaultMapInboundClaims = false;

builder.Services
    .AddAuthentication(OpenIdConnectDefaults.AuthenticationScheme)
    .AddMicrosoftIdentityWebApp(builder.Configuration);

builder.Services.Configure<OpenIdConnectOptions>(OpenIdConnectDefaults.AuthenticationScheme, options =>
{
    options.TokenValidationParameters.RoleClaimType = "roles";
});

The first commenter has succinctly pointed you in the right direction - the dataFrom field requires the secret data to be in JSON format [1]. Since your data is plain text you got that general Go error.

To get the raw secret value you can indeed use remoteRef field as shown in this example [2].

[1] https://external-secrets.io/latest/guides/all-keys-one-secret/\ [2] https://external-secrets.io/latest/provider/google-secrets-manager/#creating-external-secret

I'm new to launching a React Native app using Android Studio, and I'm encountering this error as well.

What could be the possible causes of this issue, and what are some potential solutions?

I can provide the code, but I'm unsure which specific file is needed.

did you find the reason behind that issue?

Did you manage to figure it out? Having the same issue here.

Seems as if you (or payara) are using jersey which seems to use yasson per default. In my environment things were similar and with quite similar problems (why does yasson keep stepping in?). The solution in my case was to make the following library available:

            <dependency>
                <groupId>org.glassfish.jersey.media</groupId>
                <artifactId>jersey-media-json-jackson</artifactId>
                <version>3.1.6</version>
            </dependency>

No idea why though Jackson was configured no error/warning is displayed anywhere (at least I did not see anything). Thanks to @Julios_Rodmax who pointed into this direction.

You can suppress the warnings in test environments by adding this to the configuration/environments/test.rb:

ActiveSupport::Deprecation.silenced = true

You have to right-click the file to open the context menu and select Open with...

Then choose the "Text Editor" option.

You can also associate a default editor for svg files, either through the option in the previous menu, or via a setting in your config:

"workbench.editorAssociations": {
  "*.svg": "default"
}

Yes, you can have an indicator that checks a condition against a maximum of 40 symbols and/or timeframes using security calls.

Furthermore, TradingView recently released alerts on a watchlist. This means that you can run a condition against more than 40 symbols.

You may print all variables by this command (replace eth0 by real interface name):

for i in /sys/class/net/eth0/statistics/*; do echo -n "$(basename $i): "; echo -n $(cat $i); done

I think I understand the problem, and it seems to be a bug when you make a calibration using snapping and not snapping. You can easily reproduce this bug. For convenience, I used this project on GitHub: Offline PDF Markup.

Step 1: Make a calibration using snapping (I use meters because I don't understand the imperial system 😁).

Step 2: Make two equal distance measurements using snapping at both ends of the distance measurement.

Step 3: Make a new calibration of the same length as Step 1, but this time without snapping. It needs to be a free measurement calibration.

Step 4: Make two equal distance measurements without using snapping. These need to be free measurements. I made them on the left where I drew the free calibration.

We also encounter the same problem in our production application. A temporary solution is to disable free measurement calibration by using snapper.setSnapToPixel(false);. I hope you can provide us with more information about this problem.

kind regards,

Desmond Robers😁 (NL)

It does not make sense as you state - "the mariadb source type is unknown" I suggest you export the mariadb schemas. then based on the schema you can import the schema into mysql. Following that you can export the data from mariadb (use a csv if you have to) and then import the same file into mysql.

Another point, why can you not export the mariadb to a dump and then import into mysql - they are very compatible? Or is there some reason about the data that prevents this. Suggestion: pull the mariadb down locally - do the conversion offline; the upload and impart into mysql. 90GB is a small dataset. It probably is faster!

Key tip: focus on getting the mariadb schema

This error occurs when you are using a wrong version of typing or Python that does not recognize the tuple subscripting syntax that you are using.

The error message suggests that the problem is specific to the webdriver module of Selenium, which is probably incompatible with the Python version or a certain dependency that you are using.

Your code looks good, but i think the problem lies in the webdriver version.

Try to change the webdriver to solve this problem.

A Mapper can be added to set a hardcoded user attribute for each of the identity providers - Twitter, Facebook, etc.

This attribute can then be mapped to the access token using the User Attribute Mapper under Client -> Client Scopes -> dedicated scope -> Mappers

Since your case is difficult to reproduce (especially without a detailed explanation of your exact setup), I can only make a guess.

Maybe birthday and gender info is set to Only you in your Google Account settings at https://myaccount.google.com/profile? When testing in the OAuth 2.0 Playground, you can see these details because you're accessing your own data, but this info may not be shared externally.

you could use DataBackfill. You would connect your ga4 account with BigQuery and it will backfill your historical data

did you find the solution ? i have the same problem

Just had the same issue and found out you need to use FunctionExpression not FunctionDeclaration.

Example:

"@stylistic/indent": ['error', 4, {
    "FunctionExpression": {
        parameters: "first",
    }
}],

So if i had the following $driverInfo = Get-WmiObject Win32_PnpSignedDriver | Where-Object {$_.DeviceId -eq $device.DeviceId }

How would i convert the $driverInfo.DriverDate into something readable from the WMI date form, example "20230823000000.***+" ?

Well, i know it's a bit outdated but I use https://central.sonatype.com/artifact/se.bjurr.gitchangelog/git-changelog-maven-plugin for automated generation of the CHANGELOG.md based on commit messages (utilizing the Conventional Commits convention - https://www.conventionalcommits.org/en/v1.0.0/ ).

Your empty and full flags works 1 cycle delayed. Use these condition flags combinational as

assign full = count == DEPTH-1; assign empty = count == 0;

your problems will be fixed.

I am trying to answer your questions step-by-step:

• C# is using the .NET framework for running applications. In short, the language is compiled into intermediate code (IL), which is then converted in binary code, which is executed on the hardware. The intermediate code makes .NET machine-independent (analogue to Java and the JRE). C++ is converted to machine-specific assembler code and the in binary code, so there's no abstraction layer and the code is always machine-specific. You can do the same with .NET code, but that's a different topic and in most cases, people don't do it. C++/CLI is now a version of C++, which can generate the same intermediate level code, but also the native code. For more details how the intermediate code is specified and working have a look at the standard ECMA-335.
• .NET is a runtime environment (implementing running the binary code resulting from ECMA-335). It can be implemented for any programming language and some joker even implemented a Cobol.NET version. Microsoft wanted to address a broad range of developers when introducing .NET, and that's why its not language dependent.

I'm also facing the same error, have you resolved this

yes ,exactly floating point computation can produce slightly different result across different machine or environment even the same binary excute.
: it depends to the arch of CPU and OS etc... you can use std::nearbyint instead of std::round()
check https://learn.microsoft.com/fr-fr/cpp/c-runtime-library/reference/nearbyint-nearbyintf-nearbyintl1?view=msvc-170

The issue was in the fact that the DeviceB had some kind of filtering and only allow pairing of devices which Bluetooth class is phone or computer. To check the Bluetooth class of your device: hciconfig -a

My device didn't met such requirement so I needed to manually change the Bluetooth class: hciconfig hci0 class 0x59020C

After this command, the both devices shown the Pin code and yes/no option. More about Bluetooth class on: https://www.ampedrftech.com/datasheets/cod_definition.pdf (wait little bit to load).

Very simple fix for this, which isn't mentioned anywhere in documentation. When returning the response, you need statusCode, not status.

Using the following response instead resolved the issue:

  let response = {
    statusCode: 200,
    headers: {
      "Content-Type": "text/html",
    },
    body: content,
  };

in case you are using a mac with silicon chip, like M1, follow the commming commands to make sure its installed:

brew install llvm

then check if its installed

/opt/homebrew/opt/llvm/bin/clang --version

then you may want to set the CLANG_BIN env to this path and for example install atheris.

It worked for me by setting this option in the options tab.

Thanks for answering Both the service and the console application run in administrator, and both are compiled under the same architecture, the "Equals" was a desperate attempt, I already tried with "contains" which is how the rest of the sensors are...

Name: GPU Package, Type: Power, Value: 39,817 GPU power: 39,817W

That is a copy of my console program, as you can see with the sensor.Name and sensor.Type come out... then in the service all the data is sent except for the "Power" of the gpu, it doesn't even enter the if, if I do else consolewrite.something, I get else, it doesn't find the sensor... I have that value left for my program that connects to that service and I can't find a logical solution because the same code in one place works and in the other not only that sensor😵

@J_Dubu @DazWilkin

Thank you so much for your help and suggestions! I finally discovered the issue: I was accidentally using the project number (numeric value) instead of the project ID (alphanumeric). Once I corrected that, everything worked as expected.

Thanks again for all your support!

As the warning says, you need to set up the consent screen for your app to be able to proceed with clients creation. You need to configure it to provide transparency to users about what data your app will access and ensures compliance with Google’s privacy policies.

Similar question: Can't create Google oAuth clientId becuase of the consent screen

it's local package, you need to install github repository of janus. https://github.com/deepseek-ai/Janus/issues/40

The reason for the problem UPDATE/MERGE must match at most one source row for each target row is that your INNER JOIN in the first query tries to update rows in documents_bkup when there are several matching rows in transactions_bkup depending on transaction_header_guid. Because an INNER JOIN returns all matching rows from both tables, the update statement becomes unclear which case_guid to use if a transaction_header_guid from documents_bkup appears more than once in transactions_bkup with various case_guid values. Due this ambiguity, bigquery throws an error. Refer to this documentation for more information.

Using aggregate functions in the JOIN clause to choose a single case_guid for each transaction_header_guid may be necessary to use the INNER JOIN successfully (e.g., MIN(case_guid), MAX(case_guid)) And also refer this stack link1, link2.

What I did was remove all the server on PHPstorm Settings> PHP> Servers

• then I make sure that the extension Xdebug-ext is running on the browser.

• when visiting the page. PHPstrom should popup a modal for the connection. click on the mapping of the project and accept the connection.

• last one is very important. on PHPstrom settings > PHP> Debug under external connections. you have to make sure you check the Break at fist line in PHP script

BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Your Organization//Your Product//EN BEGIN:VEVENT UID:[email protected] DTSTAMP:20250221T120000Z DTSTART:20250221T120000Z DTEND:20250221T140000Z SUMMARY:لقاء مع الأصدقاء DESCRIPTION:لقاء مع الأصدقاء لنقاش أمور هامة LOCATION:مقهى وسط المدينة END:VEVENT END:VCALENDAR

I know this is a 9 year old post, but I just had the same issue. The file was getting downloaded to a OneDrive specific folder, and OneDrive was not set up. So that same error would appear whenever I would try to download it. My solution was:

1. In your File Explorer, navigate to any local directory stored on your computer. For example, C:\Users"Your_Name".

2. Create a folder with a name like "Downloads_Local". The name doesn't matter, that was just my personal preference.

3. (This step is technically not for everyone, since your browser might ask before downloads where you want your files. But if that's not it for your case, and your files are automatically downloaded to a specific location, this step is for you.) In your web browser that you use to download files (Chrome, Firefox, Brave, etc.), find your settings, and look for a Downloads option that specifies where your files get downloaded to. Change your path to the folder you created earlier (C:\Users"Your_Name"\Downloads_Local)

4. Redownload from the website.

But if my menu content content changes based on pages (a menù based o context). If I put header in app.vue, How can I pass the menu content dinamically?

Thanks

Try embedding the fonts using StiFontCollection and change the "Text Quality" in properties panel to Wysiwyg.

target 'Runner' do
use_frameworks!
use_modular_headers!
pod 'gRPC-Core'
flutter_install_all_ios_pods 
File.dirname(File.realpath(__FILE__))
target 'RunnerTests' do
inherit! :search_paths
end
end

Very generally, replace every non-letter character with a space, then add a space before and after the whole string, then search for your two-letter state code by padding it with a space at the beginning and end. Your examples would turn into:

' John Smith of AZ '--> Matches with '% AZ %'

' John Smith of AZ Tucson ' --> Matches with '% AZ %'

' AZ John Smith '--> Matches with '% AZ %'

' John Smith AZ for Tucson ' --> Matches with '% AZ %'

' Utah Jazz ' --> Don't Match

' Azyme ' --> Don't Match

' Hazy ' --> Don't Match

As you can see, the state code will always be isolated in its own space.

For help on removing the non-letter characters, see here: How to strip all non-alphabetic characters from string in SQL Server?

There are a number of different approaches you can use to achieve smooth transition between different pages of your website. Which include, but not limited to:

• Using Single Page Application (SPA)
• CSS Animations
• React Router along with CSSTransition
• Dynamic JS Loading

Apart from that, no native browser implementation for page transition can you help you in this. SPAs are the best solution.

If you decide to execute it manually here is the hirerachy or order you should follow to exceute any kubernetes files 1 Namespace 2 RBAC (Roles, RoleBindings, ServiceAccounts) 3 Persistent Storage (StorageClass, PV, PVC) 4 ConfigMaps & Secrets 5 Networking (Ingress, NetworkPolicies) 6 Services 7 Workloads (Deployments, StatefulSets, etc.) 8 HPA (Horizontal Pod Autoscaler)

Try the following:

tonumber(ffi.cast("uint64_t *",cdata_value)[0])

Issue was resolved after downgrading to 'org.springdoc:springdoc-openapi-ui:1.6.6'.

In my case Terraform output clearly stated the permissions it was missing:

"permission": "serviceusage.services.enable,servicemanagement.services.bind"

Using IAM permissions reference, I've narrowed them down to these 2 roles:

• serviceusage.serviceUsageAdmin
• servicemanagement.admin

I have faced the same isuue please, configure your buidpath properly.

Resolved : ERROR :
Could not make a connection to the node agent or IBM HTTP Server administration server on node 1. The latest IBM HTTP Server configuration file must be obtained before updates can be completed.

Fix : GO to : Web servers > webserver1 > Remote Web server management and --> Remove checked BOX for "USE SSL"

Actually error says everything clearly;

Your project path contains non-ASCII characters. This will most likely cause the build to fail on Windows. Please move your project to a different directory.

Your project path has Non-ASCII Character, for your case its seems like the "Ü" char at "/Masaüstü/".

For the solution; you can change the project location to another file what its not has a non-ASCII char or open a folder outside the desktop and do not contain any non-ASCII characters. Do not contain any Turkish characters like ü,ğ,ö etc.

This ended up being a problem with change detection. Once I set up a way to force change detection in the modal component, I was able to see the desired result. I have to call the detectChanges function in the modal component from the component where I am opening the modal by accessing the componentInstance property. This feels a little hacky to me, so if anyone has a better solution, I would appreciate your input.

@Component({
  standalone: true,
  imports: [CommonModule, NgbModule, NgbModalModule],
  selector: 'app-create-order-modal',
  templateUrl: './create-order-modal.component.html',
  styleUrls: ['./create-order-modal.component.scss'],
  changeDetection: ChangeDetectionStrategy.OnPush
})
export class CreateOrderModalComponent {
  items?: AutoStartItem[];
  pristine = true;

  constructor(public modal: NgbActiveModal, private changeDetector: ChangeDetectorRef) { }

  detectChanges(): void {
    this.changeDetector.detectChanges();
  }
}

I updated my vs code and it worked. Basically, an update was already there, but a restart was required. Once restarted, it worked magically.

Please note: It may not resolve for all.

You'll need to either keep a reference to the variable created or perform operations on the Controls container it's in to find it later. In my own application I have a custom control, and I keep a dictionary<string, MyCustomControl> that I add the generated controls to for easier access.

See the answers here for information on using either this.Controls.Find() or this.Controls[name] to find the control if needed.