In VSCode 1.96 with Jupyter extension (2024.11.0, ms-toolsai.jupyter), you can check the related details like timestamp by hovering cursor over the execution time at the end of the cell.
Navigator.pushReplacement: This replaces the current screen with a
new one. The new screen comes in place of the existing screen, and
the current screen is removed from the stack.
Navigator.pushAndRemoveUntil: This removes all the previous screens
in the stack until a certain condition is met. For example, you can
remove all the screens and navigate to the new screen, ensuring the
previous context is completely removed.
For example, if you're on a login screen and navigate to the home screen using pushReplacement, the login screen will be replaced by the home screen. But if you use pushAndRemoveUntil, you can remove all previous screens and directly navigate to the home screen, like clearing the stack and starting fresh.
In my code the driver_name.execute("window.focus();) does not activate the window nor bring it to view. My code is using pyautogui and cannot find the visual targets, because the wrong browser window is active.
As it turns out, this was an selinux issue, rather than a PHP issue. The web server was not allowed to make external HTTP requests. Once I enabled that with "setsebool -P httpd_can_network_connect on", I was able to get requests to go through.
If someone finds this answer years later, like I did, use chrW(128) instead of chr(), that forces Unicode character. If it matches what Excel expects for a currency format it will still recognize the cell as currency.
It could depend on the quality of the content, the server performance. Check that there are no duplicate pages, and optimize the site for search engines. These are the two ways to influence and try to increase the crawl budget.
How we move files from azure storage to some remote SFTP server., Since the above link provided only talks about files moving into azure blob storage and not to some remote sftp location. thank you
That should work! Using the SHA3_sponge function along with SHA3_absorb and SHA3_squeeze from the assembly code can be sufficient, as long as the calling conventions align correctly between the C functions and assembly. Just make sure everything integrates smoothly, and you should be good to go.
डायनासोर का अंत लगभग 6.6 करोड़ साल पहले हुआ। एक विशाल उल्कापिंड पृथ्वी से टकराया, जिससे भूकंप, ज्वालामुखी विस्फोट और वातावरण में धूल का गुबार उठा। सूर्य की रोशनी बंद हो गई, जिससे जलवायु परिवर्तन हुआ और डायनासोर सहित कई जीव विलुप्त हो गए।
Passing the start argument is NOT required for the register_callback_query_handler function: see the documentation for async and regular versions.
The function probably treats the argument as a custom filter and filters out your button presses. If it works as you desire without the start argument - don't pass it. If you wanted some other functionality please clarify the question.
Have a nice day!
Reasons:
RegEx Blacklisted phrase (2.5): please clarify the question
Not a direct recommendation to run this (because I doubt this behaviour is stable across versions of pip), but the most comprehensive overview of installed files I got from piping n into pip uninstall ... (i.e request to uninstall, but then 'no' to proceed).
I don't know exactly what you are trying to do, but if you want to threat the collection of lines as one geometry you could use an NTS MultiLineString. So the method now called CreatePolylines should return a MultiLineString.
If you need to select one line in one scenario and all lines in another scenario then you need to solve this in your own code, Mapsui has no off the shelf solution for that.
Target membership refers to which target (e.g., app or framework) a file is part of. If your Swift and Objective-C files are in different targets, they won't be able to access each other.
How to Fix:
In Xcode, check the Target Membership for each file.
Make sure both your Swift and Objective-C files are part of the same target.In the File Inspector (right panel in Xcode), ensure that the same checkbox is selected for the Target Membership for both files.
Example:
If you have a Swift file FieldCustomizer.swift and an Objective-C file ThemeManager.m, both should be part of the same target.
Import the Generated Swift Header
When you use Swift and Objective-C together, Xcode generates a special header file called YourModuleName-Swift.h. This file allows your Objective-C code to see and use Swift classes and methods.
In your Objective-C file, import this generated Swift header to access the Swift code.
This import makes Swift classes and methods visible to your Objective-C code.
Expose Swift Methods with @objc and public
@objc makes a Swift method or class visible to Objective-C. Without it, Objective-C cannot call Swift methods.
public makes the Swift method or class accessible outside its module (e.g., from Objective-C if it's in a different target).
Use @objc to expose the Swift method to Objective-C.
Use public to ensure that the method can be accessed from other modules (or targets).
Without @objc and public, the Swift method would not be accessible from Objective-C.
I finally solved this. My app had three Objective-C breakpoints. I don't remember what they're for and probably don't need them since I rewrote the app in Swift. I did find this old SO post that I had upvoted, so that's probably what prompted me to add the objc_autoreaseNoPool breakpoint.
Anyway, when I removed that breakpoint, the problem immediately disappeared. Now I can finally debug on iOS 18 and macOS 15.
When you deploy an Azure Function, the secrets stored in secrets.json are not automatically transferred to Azure. The secrets.json file is used for local development only. To manage sensitive information in Azure, you should use Azure Key Vault or application settings in the Azure portal.
Recommendations
Azure Key Vault:
Application Settings:
After updating your secret on either Azure Key Vault or application settings, modify your Azure Function's code to retrieve the new secret values accordingly.
You could first call the folderpicker. Or pickfolder not sure off the top of my head. In any case it will prompt user and "allow access to this folder" explicitly , for the duration of the run time. Then you can freely accessible list dir sub folders etc.
In my case i was using this sample: deep learning image classification sample in ml.net and after run this project i got "saver not created" error
and then my project go to bottleneck phase
i used different ways to solve this problem like changing tensor flow version and etc but it doesnot fix... but i wait like 2 hours and my project kept running and then my project has proper output Exactly like Microsoft in the tutorial.
The error happend Beacuase of loading large pixel of images and The large space of RAM and CPU was being occupied.
and when i wait and does not close my running project , after a several time my project went to training phase and then show me the result
I had same error with image_gallery_saver and solved this by cloning same dependency from github to folder and adding namespace to the dependencies build.gradel file and using this cloned dependency into my project, it get solved but then I get same error with flutter_tflite I tried the same way but then flutter_tflite started showing their own errors. Sorry for my bad English, try this if it works for you...
this same problem to come for my angular code also in angular code only come this problem. code will be run but the red line error will be code. any one tell me the solution.enter image description here
Reasons:
Blacklisted phrase (1): enter image description here
Report issues at https://bugs.termux.com
~ $ apk istall gtp
No command apk found, did you mean:
Command ack in package ack-grep
Command apt in package apt
Command awk in package gawk
~ $
Did anybody was able to figure this out? I have the same warning, but when I go to CloudWatch alarms I see none being setup? Where do I see the history of the alarms that were sent?
Абсолютно идентичная ситуация. Не помогает: очистка решения, очистка кэша браузера через Ctrl + f5, пересборка решения и прочее. Помогла очистка кэша браузера вручную через историю браузера.
To fix this, open the Xcode project, navigate to the utility panel on the right side, and set the project version to be compatible with Xcode 10.0. That should resolve the issue.
The link you posted answers the question how to display the number at status bar. And if you are looking for how to run something in background for every 2 minutes, you can check out Alarm Manager. I guess Work Manager has a minimum interval of 15 minutes which is not ideal in your case.
The child elements of your list are the fragment (<> </>), not the div.
In your code the fragment is not necessary, so removing it should resolves the error, as you already use keys in <div key= ...>.
The industry norm for sharing the response on the callback URL is to use a POST call, where the relevant details are sent as part of the form-data. This can be directly consumed in the code to render the payment information to the end user.
Unable to get this to work. I just tore it all down and wrote a Flutter app hosted on Google Cloud that retrieves the information and stores it in Firestore. I put a URL to that app in in a frame in my Shopify custom page and all is hunky-dory.
When utilizing OpenCV to remove the background from an image, the result may often appear black if the alpha channel (transparency) is not appropriately managed or displayed.
I have made an effort to refine your code. While I cannot guarantee its absolute perfection for your specific requirements, I hope it proves helpful. However, if the corrected OpenCV code does not meet your expectations, you might consider using the Python library rembg, which often delivers excellent results.
For your convenience, I have provided both the corrected OpenCV code and an example using rembg below.
Corrected opencv:
import cv2
import numpy as np
# Function to check if background removal is needed
def is_background_removal_needed(image_path):
image = cv2.imread(image_path, cv2.IMREAD_GRAYSCALE)
if image is None:
raise FileNotFoundError(f"Image not found: {image_path}")
variance = np.var(image)
print(f"Image variance: {variance:.2f}")
return variance > 100 # Threshold for variance
# Function to remove background and save transparent image
def remove_background(image_path, output_path):
image = cv2.imread(image_path)
if image is None:
raise FileNotFoundError(f"Image not found: {image_path}")
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
_, mask = cv2.threshold(gray, 200, 255, cv2.THRESH_BINARY_INV)
# Add transparency
original = image.copy()
# Create an alpha channel based on the mask
b, g, r = cv2.split(original)
alpha = mask
# Merge BGR channels with the alpha channel
output = cv2.merge((b, g, r, alpha))
cv2.imwrite(output_path, output)
print(f"Background removed and saved to: {output_path}")
# Main process function
def process_image(image_path, output_path):
if is_background_removal_needed(image_path):
print("Background removal is needed. Processing...")
remove_background(image_path, output_path)
else:
print("Background removal is NOT needed. Saving the original image.")
image = cv2.imread(image_path)
cv2.imwrite(output_path, image)
print(f"Original image saved to: {output_path}")
# Input and output paths
input_image = "example_img.jpg" # Path to input image
output_image = "output_image.png"
# Run the process
process_image(input_image, output_image)
Using rembg:
from rembg import remove
from PIL import Image
import io
# Load input image
input_path = 'example_img.jpg'
output_path = 'output_image.png'
with open(input_path, 'rb') as inp_file:
input_image = inp_file.read()
# Remove the background
output_image = remove(input_image)
# Save the output image (transparent background as PNG)
with open(output_path, 'wb') as out_file:
out_file.write(output_image)
print(f"Background removed. Saved to {output_path}")
Whilst permissions can be set on a PDF they are not needing to be used by viewers or other editors so usually they are preserved but not used.
I take this page and save with printing and copy denied. I then use a signing service that uses adobe methods so most users would thing that the encrypted file is "secured" but the reader can print and copy the text whilst showing those restrictions in its info.
Copied text
I'd like to digitally sign an encrypted PDF file. The original PDF is protected by password that
you can't modify it or copy texts from it without providing the owner's password. However, I
found I can modify it and copy texts from it with ONLY user's password after stamping a
digital signature! So, how do I correct the code to preserve permissions when signing the
PDF? The code I used is showing below, where
is a method to encrypt PDF files
Printing in action
Copy the signature (which is an image)
However none of those are possible in the Adobe application.
As pointed out by Michael Tom, this is no longer a feature for the free tier of Branch (as of October 17, 2024).
I reached out to Branch support and this was their response:
Customers not on our Enterprise plans can no longer customize Social
Media tags when creating links. You can refer to the following article
for details: Can I change my app icon?
The following is an example seleniumbase python script. The second print(html) is not correct because the screen changed, and it is still printing the same initial html. The url remains the same on the browser navigation bar for both cases before and after the button is clicked.
How do I retrieve the final html after the button is clicked?
self.open("https://www.example.com/dashboard")
url = self.get_current_url()
print(url) # Prints https://www.example.com/dashboard, which is correct
html = self.get_page_source()
print(html) # Prints the initial html of https://www.example.com/dashboard, which is correct
self.click("//span[contains(.,'Change Screen Button')]")
url = self.get_current_url()
print(url) # Prints https://www.example.com/dashboard, which is correct since the url remains the same on the browser navigation bar, even though the screen changed
html = self.get_page_source()
print(html) # Prints the initial html of https://www.example.com/dashboard, which is incorrect
I cannot comment. This seemed to help me since I was having the same issue. Thank you @BMitch and @xthursdayx
The same error showed up when trying to pull an image from Docker Hub. This seemed to help to download the image from Docker Hub
docker pull --platform=linux/amd64 username/app_from_docker_hub
After that the image was downloaded and it could be ran using the following code: docker run -d -p your_port:your_port username/app_from_docker_hub:latest
I'm having the same issue - running Mautic 5.1 in a docker locally for testing, and importing a file results in the error cannot find the .csv file. I've verified the same file it says it can't find is located in the expected folder var/www/html/var/import inside the mautic_web container.
I faced this same issue today. Try to clear some space on the disk at the server side and the ssh session works then.
Your vs code on local machine will try to upload vscode-cli-ea1445cc7016315d0f5728f8e8b12a45dc0a7286.tar.gz to server.
If you don't have enough space, ssh will failed.
Announcing your resignation publicly in advance may not be well-received by other companies. This notice should only be mentioned to recruiters when interviewing for new positions.
Instead, on your last working days, posting a thank-you note to the company for their support during your tenure will convey your appreciation for your former workplace. This also subtly indicates that you are open to new opportunities, thereby creating a better impression with both your previous and prospective employers.
This is just my opinion. I hope it can be helpful to you.
The solution provided by Gorgon is not working for us. The solution for us is to set { "containerLogs": { "enabled": false } } in Optional configuration settings under your EKS cluster's Amazon CloudWatch Observability Addon page
I have the same issue, and I completed step 2.
I reloaded my VS Code and ran the command npx playwright install,
but the strange behavior disappeared. →
PS C:\Playwright> npx playwright install
Removing unused browser at C:\Users\fj3060hf\AppData\Local\ms-playwright\chromium_headless_shell-1148
and my chrome-win folder is cleared...
do you have any know-how about it?
The Axios library is not part of Node.js’s core modules so you won’t find it in the Node.js documentation. Axios is a third-party library commonly used to make HTTP requests in JavaScript. It is maintained as an open-source project and available as an NPM package.
The source code for the Axios library is hosted on GitHub. You can access it here:
Please go through mentioned...
1.Increase timeouts on both the client (Postman) and the Spring Boot application.
2.Check ECS and Databricks configurations, ensuring no network timeouts or restrictions.
3.Review async request settings and increase timeouts for long-running queries.
4.Ensure the query is optimized to reduce execution time.
int write(Uint8List data) {
try {
if (!_serialPort.isOpen) {
if (!open()) {
return -1;
}
}
return _serialPort.write(data,timeout: 500);
} catch (e) {
debugPrint("Error writing to port $portName: $e");
logManager.addLog("Error writing to port $portName: $e");
return -1;
}
}
/// Write data to the serial port.
///
/// If `timeout` is 0 or greater, the write operation is blocking.
/// The timeout is specified in milliseconds. Pass 0 to wait infinitely.
///
/// Returns the amount of bytes written.
int write(Uint8List bytes, {int timeout = -1});
so I can change timeout to 0 or >0,and it works well now~
http://domain/svg/filenotexisit.svg - file does not exist but passed with status 200 and app hangs
I'm not sure about your actual test URL, but I guess that URL also matches the expression in the rule, so it execute the rewrite action, which changes the response.
The URL you configured is /, which may point to some default pages (existing, such as index.html, default.html), so it returns 200. Please check it.
If I misunderstood something, please provide more details, such as a minimal example that reproduces the problem.
Reasons:
RegEx Blacklisted phrase (2.5): please provide
RegEx Blacklisted phrase (1): I misunderstood something, please
So, let me tell you about this crazy situation I found myself in. I had invested a significant amount of money in this company, thinking it would be a great opportunity to make some extra cash. But then things took a turn for the worse, and suddenly I couldn't withdraw my funds and they could not give me a reasonable reason for that other than asking for my personal information which is kinda weird. I was freaking out, until a friend recommended ULTIMATE RECOVERY FIRM and their remarkable team to help me out. Let me tell you, they were lifesavers! They worked tirelessly to retrieve my money from the company, and after some back and forth, I finally got it back. I can't thank them enough for their expertise and persistence in getting me what was rightfully mine. It was definitely a lesson learned about doing thorough research before investing in anything, that's for sure! You can contact them via email: [email protected] WhatsApp: +1—(786)—432—2178
If you let the browser manage credentials, only 1 "session" / "user" is active at a given time, unless you:
Use different orgins / domains per user.
Manage the requests and session/authentication tokens yourself by manually setting headers.
Use a different cookie name for each user
The error message you're encountering indicates that the describe_type() function from the GuzzleHttp library is being declared multiple times, leading to a conflict. This typically happens when multiple versions or instances of the Guzzle library are loaded simultaneously.
Understanding the Issue:
In your setup, it appears that two plugins are including their own versions of the Guzzle library:
SSML Processor Plugin: This custom plugin includes the AWS SDK,
which in turn includes Guzzle.
eRoom - Zoom Meetings & Webinar Pro Plugin: This plugin includes its
own version of Guzzle.
When both plugins are active, PHP attempts to load the describe_type() function from both instances of Guzzle, resulting in a "Cannot redeclare" error.
Potential Solutions:
Use Composer for Dependency Management:
If possible, refactor your plugins to use Composer for managing
dependencies. Composer ensures that each package is loaded only once,
preventing such conflicts.
By centralizing dependency management, you can control the versions
of libraries used across different plugins, reducing the risk of
conflicts.
Namespace Isolation:
refactoring to use Composer isn't feasible, consider isolating the
namespaces of the Guzzle library in one or both plugins. This
involves modifying the autoloaders or using tools like PHP-Scoper to
create a prefixed version of the library, ensuring that each plugin
uses its own isolated version without conflicts.
Check for Multiple Inclusions:
Ensure that the Guzzle library isn't being included multiple times
within the same plugin or across different plugins. Use include_once
or require_once to prevent multiple inclusions of the same file.
Update Plugins:
Check if there are updates available for the conflicting plugins.
Plugin developers often address such issues in newer releases by
updating dependencies or changing how they are loaded.
Contact Plugin Developers:
If the issue persists, consider reaching out to the developers of the
conflicting plugins. They might be aware of the issue and could
provide a solution or workaround.
References:
A similar issue was discussed on Stack Overflow, where the conflict
was resolved by managing dependencies through Composer: STACK OVERFLOW
By implementing one of these solutions, you should be able to resolve the "Cannot redeclare GuzzleHttp\describe_type()" error and ensure that your plugins function correctly without interfering with each other's dependencies.
