Test in the browser's developer console by typing this code to see if it can retrieve the geolocation:

navigator.geolocation.getCurrentPosition(console.log, console.error);

This could help pinpoint whether the issue is specific to your app or a general browser issue.

possible.

For anyone who has the same problem as author and me and reads this article, I am leaving a sample image and a link to the uploaded package.

Although this post is 5 years old, I am leaving a reply. I also tried matplotlib, but it was slow. And I tried pyqt, pyqtraph, and finplot like you, but they were faster than matplotlib, but slower.

I was wondering whether to try a language other than Python, but I went back to matplotlib and tried something new. And it was successful.

I created a fast candlestick chart without using pyqt. And this can also be used in connection with tkinter.

https://pypi.org/project/seolpyo-mplchart/

To mark an invoice as paid in QuickBooks Online using the PHP SDK, you need to create a Payment object and link it to the invoice. Simply updating the invoice balance won't work because QuickBooks maintains separate entities for invoices and payments.

1-The Payment object will link the payment to the invoice using the LinkedTxn field. 2-Specify the amount that matches the invoice balance. 3-Use the DataService object to save the payment to QuickBooks.

You can check this sample code, it will give you an overview: you may also inspect some external resources; invoice generator

try loads not load: client.put(key, json.loads(response))

I follow code of @kmote and can extract image from RTF and display to Picture box ( C#) but quality of image too low (maybe the reason is we must to draw image again). Do you have any idea to improve image quality when display to picture box.

You should use python files (.py) to write functions that you can then import in your jupiter notebook. However, note that if you change a function in an imported python file, you have to restart the kernel and run the import cell again for the changes to take effect. If you just run the import cell again, python notes that the package has already been imported and does not read the file again.

You can use regular expressions to remove or modify sections like setObjectNames, retranslateUI, and pyuic5 comments. Also, look for places to condense object initializations, like combining QLabel parameters into one line.

you can try with

const thuongHieuElement = document.getElementById('thuongHieu');

const thuongHieuText = thuongHieuElement.options[thuongHieuElement.selectedIndex].text;

@Luuk's answer is great, but it also deletes photos without a matching movie file.

Here my commented alternative, which I have no doubt could be improved.
the Remove-Item uses the -WhatIf parameter for safety.
If it works as intented, remember to remove it.

# Let's get all the MOV files.  
$MovieList = Get-ChildItem -File -Filter '*.mov' | 
    # But we only need the base names without the extension.   
    Select-Object -ExpandProperty BaseName

# Let's get all the photos.     
$PhotoGroupArray = Get-ChildItem -File -Filter '*.jpg' | 
    # Hashing them.   
    Get-FileHash |
    # Grouping them by Hash, so 1 Hash : N Photos
    Group-Object -Property Hash | 
    # Skipping Hashes with just 1 photo: they have no copies we need to remove.   
    Where-Object { $_.Group.Count -gt 1 } |
    # Simplifying the resulting object by removing unneeded properties, though it's optional.  
    Select-Object -Property @{Name = 'FileName'; Expression = { $_.Group.Path } }


# For each group of photos.   
foreach ($PhotoGroup in $PhotoGroupArray) {
    # Check if any photo name is the same as any movie name, except for the extension of course.   
    # If not, adds the photo to the array of files to remove.   
    $RemoveList = foreach ($Photo in $PhotoGroup.FileName) {
        if ([System.IO.Path]::GetFileNameWithoutExtension($Photo) -notin $MovieList) {
            $Photo
        }
    }

    # If the number of photo to remove is the same as the full array of photos, it means there was no movie with the same name.  
    if ($RemoveList.Count -eq $PhotoGroup.FileName.count) {
        # In this case remove every photo except the shortest name one.  
        $RemoveList = $RemoveList | Sort-Object -Property Length -Descending -Top ($RemoveList.count - 1)
    }

    # Remove the compiled list.   
    $RemoveList | Remove-Item -WhatIf
  
}

#>

I was able to achieve this by using CustomPayload

"message":[
             {
               "contentType": "CustomPayload",
               "content": f"Here are the details of your order:<br>• Order ID: {row['orderId']}<br>• Created on: {row['Date']}"
              }
          ]

var app = WebApplication.CreateBuilder(args).Build();
...
//get your types
...
types.forEach(type=>{
    
    app.MapGet($"api/{type.Name}/get-list", async (HttpContext httpContext) => await _service.GetListAsync())

});

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual C++ Build Tools. Following its REAME.md and it is easy to use.

From my experience, clean and efficient way to do that was that each component use different controllers, however, if there was a method which should work the same, such as yours GetList I would write that specific method in inherited controller like GenericController and call it from all controllers.

That way I would have best of both worlds, from one side one time written logic and just called when needed, but on the another, able to do additional logic in future.

If you want to have one main controller

1. then point all API calls from blazor to that specific controller, however, be sure to pass URL as parameter to know which component it was called from or (not sure is it visible from stacktrace).
   • Problem with this approach is that if you need different logic for specific endpoint such as [Authorize] attribute it will just get messy and complicated.

Woodle India offers excellent DIY all MDF shapes woodworking tutorials, tools, and products, empowering enthusiasts to create personalized, handcrafted wooden items efficiently.

To avoid reading stale data when using mmap on ARM64:

Use msync: Call msync(ptr, size, MS_SYNC | MS_INVALIDATE) to flush and invalidate caches.

Use Memory Barriers: Add asm volatile ("dsb sy" ::: "memory"); to enforce memory synchronization.

Open with O_SYNC: Use open("/dev/mem", O_RDWR | O_SYNC) for synchronous memory access.

Configure Uncached Mapping: Ensure mmap maps the buffer with uncached attributes (MAP_SHARED).

Check DMA Coherence: Use DMA-coherent memory for hardware buffers, if supported.

These methods ensure timely updates from the hardware buffer to the mapped memory.

You may simply use the online available tool like password checker or security.org or you may use the api's of these tools to generate strong passwords for you.

OK GOT IT IT NOW RESOLVED .THANK YOU

I encountered the same problem. And it's clearly a regression, everything worked a couple of weeks ago. Is there anything new in this issue? Naturally, I checked the ID exists. search.lookupFields: Missing a required argument: id Error at suitescript/resources/javascript/record/recordImpl.js:156:24 at Object.submitFields (suitescript/resources/javascript/record/recordImpl.js:154:30) at execute (/SuiteScripts/NoTraffic_SB/UpdateItersectionProcess.js:60:36) at Object.execute (/SuiteScripts/NoTraffic_SB/UpdateItersectionProcess.js:57:32)

answer to the problem is the two last lines on the ansible code:

- name: Run SAPStopStart.py script
  shell: |- 
    python /opt/osit/sap/bin/SAPStopStart.py -a Check -s "all" --hrep "yes" --hsql "yes"
  become: true
  become_user: root
  register: sap_stop_start_out
  ignore_errors: yes
  timeout: 300
  environment:
    TERM: xterm

I found a post on Apple Developer CryptoKit to create JWT, which explains clearly how to decode the private key produced by openssl. Just as @dave_thompson_085's comments:

PKCS8 format for private keys, which contains both an algorithm identifier with optional parameters (here ed25519) PLUS the algoirthm-dependent key data

The point is we need to extract only the private key bytes after dumpasn1 the data!

Thanks Michail.

ıt worked fine and saved me..

On which particular device does this token bucket alogirthm is installed, as if it is done on the server, then the requests being accepted by the devices in the network viz. router, and firewall, and switches, would also get overloaded and stop the network, hence where this is installed is my requirement

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual C++ Build Tools. Following its REAME.md and it is easy to use.

I see that you're also using Flutter 3.27. For me, this issue was fixed by downgrading back to Flutter 3.24.

Here's the bug report for this issue on GitHub. They seem to have not fixed it yet...

I spent hours debugging my code after ending up with the same error. Then, as I was running my script in headless mode, I didn't see how the Youtube page I was visiting for my test setup looked like. It turned out that since I was behind VPN, YouTube showed a different view for the video player with no buttons at all but only telling me to "sign in to prove I am not a bot."

I disabled the VPN, then YouTube no longer thought I was a bot, and everything worked again. I know this is not a solution to the problem, but I share it as one might bump into the same issue, although nothing is wrong with the code itself.

How to up backend server? is agent should install to up backend

I am also facing the similar issue but instead I'm trying to include source file from an external repo to my local repo. Where normal build is working fine but Unit test using G-Test is throwing error.

I think you are looking for {absolute_count}

I also encounter this issue on my Ubuntu 22.04.3 LTS. My Cython is 3.0.11 version. My setuptools is 59.6.0.

Anyone has idea of that?

check if you have allocated enough ram , i.e -m 2G

import { useEffect, useState } from "react";
import { getCartDetail } from "../components/services/_getMethod";

export default function useCartItems() {
    const dealer_id = sessionStorage.getItem("dealer_id");
    const [items, setItems] = useState([]);

    const fetchCartItems = () => {
        // getCartDetail() is common api function
        getCartDetail("api/ProductDetails/GetCountProductList", dealer_id).then(
            (data) => {
               // it stores length setItems(data.data.length);
                setItems(data.data);
            }
        );
    }

    useEffect(() => {
        fetchCartItems();
    }, [])

    return { items, fetchCartItems };
}

why are u storing length in the items? the setItems stores an number to the items state variable and I think somewhere u tried to map this or take this value expecting it to be as array.

Edit the checkout page to remove the default WooCommerce block and include the shortcode [woocommerce_checkout] in the editor.

There's no 'clean' way of doing it that I've found so far, but when implementing a bare AppDomain.CurrentDomain.AssemblyResolve you're able to ignore the version numbers in the handler to achieve a similar result as assembly bindings (or can respect the numbers of the binding if you choose to implement that too).

In my case, I have my streamlit(python) running in background which was preventing this install. Make sure you dont have any python process running in the project.

if you aren't using any virtual environments, you can open the cmd as Administrator and install it there.

    playerController.videoGravity = .resizeAspectFill

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual C++ Build Tools. Following its REAME.md and it is easy to use.

Thanks for all people's good answers. And Based on these, I think maybe I understand the differences between the two operations.

*ptr_current_node = entry->next;

and

ptr_current_node = &entry->next;

I have drawn a diagram to illustrate the remove function RemoveIf3. And the 2nd, 3rd steps is my understand of the two different operation of points.

For anyone who has this problem, I have developed a dotnet tool for making it easy to compare all these variables in Azure DevOps libraries.

Tool: https://www.nuget.org/packages/AzureDevopsPipelineLibraryCompare

Maybe this will fit your need ? https://www.baeldung.com/eureka-self-preservation-renewal

Is there a way to make it change according to the scaling of the page? I am writing a responsive web page, but my SVG cannot scale properly. Unfortunately, I cannot directly manipulate it through JavaScript

I had the same requirement as described above: to use Aspire with Blazor WebAssembly (client) apps.

You can add the URLs to web APIs that your Blazor WebAssembly (client) app needs to call in the client's appsettings.json files, and that works ok. You can even specify different URLs in for different environments in appSettings.{environmentName}.json and that works fine too. However, you'll have to remember to maintain the endpoints in the client app if they change in the distributed app, and that's exactly the pain-point that Aspire is designed to address.

I made a Nuget package that expands the existing functionality of Aspire to work for Blazor WebAssembly (client) apps:

• https://www.nuget.org/packages/Aspire4Wasm/
• https://github.com/BenjaminCharlton/Aspire4Wasm

If you install the Nuget package in your AppHost project and follow the instructions in the README.md then your distributed application host will put the service discovery information in the appropriate appsettings.{environment}.json file of the Blazor WebAssembly (client) app. I've targeted .NET 8 and 9.

It's only five more classes and it doesn't change any of the existing codebase of Aspire.

Please can you let me know if you like the implementation and contribute improvements on GitHub if you wish? I would like to submit this as a pull request for the Aspire team to (hopefully) merge.

It's as simple as the below (in Program.cs of your AppHost project)

var builder = DistributedApplication.CreateBuilder(args);

var inventoryApi = builder.AddProject<Projects.AspNetCoreWebApi>("inventoryapi");
var billingApi = builder.AddProject<Projects.SomeOtherWebApi>("billingapi");

builder.AddProject<Projects.Blazor>("blazorserverapp")
    .AddWebAssemblyClient<Projects.Blazor_Client>("blazorwasmclient")
    .WithReference(inventoryApi)
    .WithReference(billingApi);

builder.Build().Run();

Then in Program.cs of the client app:

builder.Services.AddServiceDiscovery();
builder.Services.ConfigureHttpClientDefaults(static http =>
{
    http.AddServiceDiscovery();
});

builder.Services.AddHttpClient<IInventoryService, InventoryService>(
    client =>
    {
        client.BaseAddress = new Uri("https+http://inventoryapi");
    });

    builder.Services.AddHttpClient<IBillingService, BillingService>(
    client =>
    {
        client.BaseAddress = new Uri("https+http://billingapi");
    });

That is a nice article from you , this is informative stuff . Hope for more articles from you . I also want to share some information about kia showroom hyderabad

There is no LIMIT clause in the SQL UPDATE statement.
Even if there was, LIMIT / OFFSET for "pagination" does not scale well.

Something like this could work:

CREATE OR REPLACE PROCEDURE upd_in_batches(_batch_size int = 1000)
  LANGUAGE plpgsql AS
$proc$
DECLARE
   _id_bound int = 0;  -- or whatever?
BEGIN
   LOOP
      WITH sel AS (
         SELECT a.id  -- id = PK!
         FROM   tablea a
         WHERE  a.id > _id_bound
      -- AND    <some other conditions in Table A>
         ORDER  BY a.id
         LIMIT  _batch_size
         FOR    UPDATE
         )
      , upd AS (
         UPDATE tablea a
         SET    target_col = b.b_source_col
         FROM   sel s
         JOIN   tableb b USING (id)
         WHERE  a.id = s.id
         AND    a.target_col IS DISTINCT FROM b.b_source_col
         )
      SELECT max(id)  -- always returns a row
      FROM   sel
      INTO   _id_bound;

      IF _id_bound IS NULL THEN
          EXIT;  -- no more rows found; we're done, exit loop
      ELSE
         COMMIT;
      END IF;
   END LOOP;
END
$proc$

See:

• Postgres UPDATE ... LIMIT 1
• How to force COMMIT inside function so other sessions can see updated row?
• How do I (or can I) SELECT DISTINCT on multiple columns?

@Herbert answer is not working if the range is for example 12/20 and 01/20 and the current date is 12/22.

import cv2

이미지 읽기

image = cv2.imread('example.jpg') # 'example.jpg' 파일을 읽어옵니다.

이미지 표시

cv2.imshow('Image', image) # 'Image'라는 창에 이미지를 표시합니다.

키보드 입력을 대기 (창을 닫기 전까지)

cv2.waitKey(0)

창 닫기

cv2.destroyAllWindows()

You should also add the suitable property depends on your database.

spring.jpa.database-platform=org.hibernate.dialect.PostgreSQLDialect

In react , changing the state is immutable without the setState function. If we use setState function then the state value will be updated then the react re-renders the Component UI.

Based on your question, the image below shows when to use each method to extract the notification info. Additionally, please refer to the new notification payload, as the old one is deprecated.

by pressing Ctrl + G. you can goto line number,

If you are building this Tab from the Teams Toolkit, you will notice that in the app.js file, we start the service on port 53000 and add a mapping for /tab. Therefore, you do not need to modify the contentUrl and websiteUrl in the staticTabs.

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual C++ Build Tools. Following its REAME.md and it is easy to use.

For me the issue was related to outdated pip, so upgraded it

{virtualenv}/bin/python3.9 -m pip install --upgrade pip

If you are using php 8.2, run php -i | findstr "Thread Safety" to know, then look for php_redis-6.1.0-8.2-ts-vs16-x64, also check for 64 or 34 depends on your system operating system, donwload it and extract it copy php_redis.dll to your ext folder which can be found on xampp/php/ext, then past it and open your php.ini and add the extension like Eg: extension=php_redis.dll now save it and restart your xampp, everything should work. to download redis like the link redis link

Fully YouTube tutorial: JWT Authentication in Symfony 7 API Platform | Step-by-Step Guide

If you are using Norton Antivirus, try disabling the "Safe Web" feature. This worked for me.

  AudioPlayer() ..setAudioSource(
    LoopingAudioSource(
      child: AudioSource.asset(Assets.soundNotificationRinging),
      count: 4,
    ),
  ) .. play();

Hitesh Bhai chaudhary ke liye bhi kuch bhi nahi post on Facebook and Twitter account na post on Facebook and Twitter account na post on Facebook and Twitter account na post on Facebook and Twitter account na post on Facebook and Twitter account na post on Facebook and Twitter account

Draw Deterministic Finite Automata for:

1. (0+1)101(0+1)
2. 10(0+1)*1

It’s great that Solana provides extra space for future upgrades to ensure smooth scalability!

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual C++ Build Tools. Following its REAME.md and it is easy to use.

type AnyObject = {
    [key: string]: AnyObject | undefined;
}

const a = {} as AnyObject
console.log(a.b?.c) // This is fine
console.log(a.b.c)  // This gives a possibly undefined error

You can try it on the TS Playground here

You're absolutely right that Facebook and Twitter's crawlers don’t process JavaScript, so changes you make with libraries like react-helmet won’t be picked up.

However, there are alternatives to SSR that work just as well:

Use pre-rendering: Pre-rendering tools like React Snap or services like PreRender.io generate static HTML versions of your pages. These tools execute your JavaScript and save the resulting HTML so crawlers can see your meta tags.

Add static meta tags for key pages: For critical pages like your homepage or popular blog posts, you can add meta tags directly in the public/index.html file. This ensures they are available to crawlers, even without JavaScript.

Use a headless CMS: A content management system like WordPress, Strapi, or Contentful lets you manage meta tags for each page dynamically. You can integrate the CMS to generate meta tags during your build process or pre-rendering step.

Test with social tools:

After adding meta tags, always test them using:

Facebook Sharing Debugger Twitter Card Validator

What’s the simplest solution?

If you don’t want to dive into pre-rendering or CMS setups, start by manually adding static meta tags for your most important pages. You can gradually scale up with pre-rendering as needed.

This way, when someone shares your blog or page on Facebook or Twitter, the title, description, and image you want will show up without needing SSR.

header("Location: " . $_SERVER['PHP_SELF']);

exit();

You are trying to load server inner path in the url, you need to use plugin_dir_url instead of plugin_dir_path

define('APV_PLUGIN_DIR', plugin_dir_url(__FILE__));
define('BUILD_DIR', APV_PLUGIN_DIR . 'build/');

My guess: you have multiple ids of propertyParagraph, but inside you have access to unique IDs as they come in. The getElementById() will return the first one it finds. I don't know how the shadow-roots or custom elements work, but suspect that this has something to do with the listeners only being attached to the first, but not the others.image showing what happens when you inspect elements in chrome on the full page, it shows at least two elements have an id of propertyParagraph therefore a non-unique ID look towards the top and bottom of the image to see it

You can find fully guide here: YouTube tutorial

On the iTerm 2, you can use the commands cmd+"[" or cmd+"]" to move among your terminals. You feel free.

our Suno year-end carnival promotion offers a one-stop package of all core API functions for music creation, sound synthesis, and intelligent audio processing on the Suno official website.

Welcome to experience: https://surl.id/1uHIdYoAds

Discord Link: https://discord.com/invite/ss8NXrKx

There doesn't seem to be a precise limit. I've tested an enum with 10000 cases and it works. However, I wouldn't recommend doing this because compilation becomes extremely slow and the code becomes difficult to maintain. I think it's better to limit the number of cases to a maximum of a hundred to avoid this kind of problem.

Just check here. so many samples Azure provided. Many of them are about tag policy definitions. Simply modify them and pass in the parameters.

1. Use the Google Maps API

To integrate Google Maps, you'll need the Google Maps JavaScript API for rendering the map and enabling features like geolocation and address auto-completion. Here's a basic outline:

Obtain an API Key:

Go to the Google Cloud Console and enable the Maps JavaScript API and Places API.

Generate an API key and restrict it to your domain for security. Add a Map to the Checkout Page:

Customize the Magento 2 checkout page by extending the checkout_index_index layout.

Include the Google Maps JavaScript API script in your custom module.

Enable Address Autocomplete:

Use the Places API's Autocomplete service to suggest addresses as users type.

Save the Selected Address:

Capture the address details from the map and save them to the order using Magento's custom fields.

2. Consider a Pre-built Solution While implementing this from scratch is possible, it can be time-consuming and requires in-depth knowledge of both Magento 2 and the Google Maps API.

If you're looking for a more efficient and ready-to-use option, the Google Maps Pin Shipping Address Checkout Extension for Magento 2 might help.

This extension: https://shop.aalogics.com/google-maps-pin-shipping-address-checkout-extension-magento2 Provides an intuitive map interface at checkout.

Allows users to select their exact location by dropping a pin on the map.Automatically fills in the address fields based on the selected location. Supports multiple shipping addresses.

This can significantly improve the user experience for your customers and save development time.

By either customizing Magento yourself or leveraging a pre-built solution, you can enhance your checkout process with Google Maps. Let me know if you need help with implementing the steps above!

You've received great advice about using CurrentProject.ImportExportSpecifications, and I’d like to add a few tips for a smooth migration and future protection. Tips for Migrating Import/Export Specifications Use Temporary Storage: Write specifications to a text file or a dedicated table. For example: vba Dim imexspec As Object Dim fileNum As Integer fileNum = FreeFile Open "C:\Temp\ExportedSpecs.txt" For Output As #fileNum

For Each imexspec In CurrentProject.ImportExportSpecifications Print #fileNum, imexspec.Name & ";" & imexspec.XML Next

Close #fileNum Implement Error Handling: Include error handling in your VBA code to manage issues gracefully: vba On Error GoTo ErrorHandler ' Your code here Exit Sub

ErrorHandler: MsgBox "An error occurred: " & Err.Description Document Specifications: Create a spreadsheet to list each specification with details on its purpose. This will help with future troubleshooting and migrations.

It wasn’t actually an issue with the setup itself. The problem stemmed from IIS being configured to treat domain names as case-sensitive. So, when I tried to use “MyDomain” instead of “mydomain,” IIS didn’t recognize them as the same.

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual C++ Build Tools. Read the README.md and it is very easy to use.

Documentation saying "update the PR title with correct Jira ticket". Funny that when PR was merged, I have not seen PR tab any longer. But it's possible to find PR tab even for merged pull requests. So I did it, changed PR title, and it started to work. Easy fix, took long time to find though. Even if you don't see the tab, then use direct URL with PR # to get to it. And they you will be able to edit the title. For example use URL:

https://github.com/yourname/yourproject/pulls
https://github.com/yourname/yourproject/pull/3

It looks like your current rule in robots.txt is blocking crawlers from accessing everything in the /wp-content/uploads/ folder.

While this does stop unwanted media file URLs from being indexed, it also prevents crawlers from accessing files like your favicon, which you want them to see.

Here’s a better way to handle this:

Update your robots.txt

• Instead of blocking the entire /wp-content/uploads/ directory, you can block specific file types like images or media files you don’t want indexed. For example:

  User-agent: *
  Disallow: /wp-content/uploads/.png
  Disallow: /wp-content/uploads/.jpg
  Disallow: /wp-content/uploads/*.gif

This allows crawlers to access other files like your favicon or CSS/JS files while keeping unwanted media URLs out of the search results.

Use the 'Discourage Search Engines' Option for Media Attachments In WordPress, go to Settings > Reading and enable the option to discourage search engines from indexing media attachments.

Redirect Media URLs

• Use a plugin like Yoast SEO or similar to redirect media attachment pages to the post they belong to (or your homepage). This keeps these URLs from being indexed separately.

Check Your Sitemap

• If you’re using an SEO plugin, ensure your sitemap doesn’t include media URLs. You can typically exclude these in the plugin settings.

By following these steps, you can keep unwanted media file URLs out of search engines while still allowing them to crawl important assets like your favicon. 😊

Let me know if you’d like more detailed guidance on any of these!

I have use your code. but whenever i delete the picture and wanted to insert another picture by clicking the button, it seems the button does not working anymore

Try this

let list = toscalar(_GetWatchlist('...........')
| summarize make_list(SearchKey));
AzureActivity
| where ipv4_is_in_any_range(tostring(CallerIpAddress), list)

While this is expected behavior on the iOS platform, there are a few user-friendly ways to handle it:

• Once backend confirmation of the payment is received, send a 'return to app' push notification to the user's phone.
• Send an order confirmation notification to encourage the user to return to the app.

That said, most iOS users are familiar with this flow and typically return to the merchant app naturally.

To achieve this, you can set up a reverse proxy to forward requests from example.com/blog to blog.netlify.app while keeping the URL unchanged in the browser's address bar. Here's how:

1. Create a Worker in Cloudflare and configure it to forward requests to your blog.netlify.app.
2. Set up a route in Cloudflare to direct traffic from example.com/blog to this Worker.
3. Ensure your absolute paths in SolidJS are configured correctly in tsconfig.json so that asset paths resolve properly when served from Netlify.

This setup ensures seamless proxying, and SolidJS's absolute paths should work as long as Netlify serves them correctly. I implemented a similar setup on my website, and you can check it out for more details. https://sonic-happy-hour.us/

I am facing the same issue, Kindly let me know incase a solution is arrived

I've had the same problem, and tried all of these. But I use docker and have container for laravel app and onther container for nginx. So, I get 403 error invalid signature on email verification because scheme (http/https) does not proxy pass. To solve, I set up nginx to proxy pass proto on servel level like here.

You can try msvc-pkg. It build GMP and other GNU libraries on Windows using Visual Build Tools. Read the README.md and it is very easy to use.

If the desired payment gateway does not provide the required SDK, the best approach is web-view integration. This involves an API-based implementation on the back-end, redirecting the user to the gateway's hosted page within the web-view. Numerous resources and sample codes are available for hash generation, tailored to the specific language and algorithm required.

Please read through the answer provided over here.

https://github.com/grbsk/ng2-idle/issues/204#issuecomment-2474226381

For angular devlopers, add to angular.json the following line as shown in the screenshot

There could be multiple reasons for this:

• Risk checks on Google Pay's end for a specific transaction.
• Issuer-level downtimes, as the failures are intermittent.
• Issues with the intent redirection to Google Pay.

i had incorrectly named my home page "index.md" as opposed to "_index.md", per https://discourse.gohugo.io/t/blog-posts-are-not-build-correctly-unless-hugo-server-is-used/49442

My logs show that acks = -1 enter image description here

Now the Correct way to handle for is useActionState()

const [state, formAction, isPending] = useActionState(upsertCarDetails, car)

Next.js Server Action's Pending State

I found the solution, maybe late but it works on my end.

Update driver for the "Atmel-ICE CMSIS-DAP (interface 0)" to "USB Input Device" in the Device Manager.

Device Manager Screen

Please see the following:

https://developers.google.com/calendar/api/v3/reference/events/insert

I'm not sure which language you're using, but you can get the link from the htmlLink object.

The problem was happening because of turbopack.

I removed the turbopack https://github.com/psankar/test-next-js-lib/commit/a09d2b63d288914688483ec317d06d1667dcf2ae after which the import works fine and the code works.

diff --git a/nextjs/package.json b/nextjs/package.json
index adb86a4..bc15fe9 100644
--- a/nextjs/package.json
+++ b/nextjs/package.json
@@ -3,7 +3,7 @@
   "version": "0.1.0",
   "private": true,
   "scripts": {
-    "dev": "next dev --turbopack",
+    "dev": "next dev",
     "build": "next build",
     "start": "next start",
     "lint": "next lint"

add this line into your global.css

• { overscroll-behavior: none; }

Rather than redirecting the user to a browser, which could disrupt the flow, a better practice is to render the URL provided by the payment gateway in a web-view (in-app browser). This ensures the app regains control once the payment is completed.

I wanted to apply this in R markdown to a pdf output within a chunk, but I had the same issue as Jane Lu (all the subsequent content was centered. To fix this, I used \raggedright instead of the second \center (note the double \ because this is within an r chunk)

Strange that there is no \left or \right functionality, instead you need to use \raggedright or \raggedleft respectively!

• Start by identifying your target customers’ preferred payment methods.
• Use sandbox/test modes provided by these gateways to validate the integration.
• For ease, start with pre-built checkout solutions, then move to custom flows as needed.

Here's a quick Integration guide for Plural's Hosted checkout: https://developer.pluralonline.com/docs/plural-hosted-checkout

If you want to match strings containing only whitespace characters, you can use this:

^[\s]+$

I have check both Delete Secret - Delete Secret and related Remove-AzKeyVaultSecret, and find noway to adding the version parameters.

It seem that azure not support deleting specify version of secrets. About this topic, github has a issue discussion. you can check details here

You can manually download it and install if you can NOT know the reason why Xcode can't do it. Download the iOS Simulator(There is also the corresponding install guide) here: https://developer.apple.com/download/all/?q=Xcode