You mention you have indexes on the id of each table but do you have indexes on the foreign keys (a_id, b_id) in your example?
And do you have and index for the column you use in the query if it is a common search?
I wanted to put this out there. I ordered the Funky Chicken Kit and I tried to contact, My Fabric Addition. I received the kit and the squares not right. I did talk to Jean Fletcher and she sent another kit. I opened the kit and it was still wrong with less materials. WHY WOULD SOMEONE DO THAT? THANK YOU, for reading letter. Sincerely, Rachel Hass
Please what if I have an html file, How do you make sure that this is rendered at the appropriate position. A situation whereby I have a whole web page to be placed inside the editor, within the webpage there are custom designed images. My challenge is how to place the customBlot in the proper position while other tags used the embedded quill blot. Is it something that is possible to achieve?
For instance, I want to get the thumbnail of a video inside the video tag. I want the thumbnail to be render in the position of the video tag; whenever I place the html inside the editor.
im new to HA and struggling to get my head around everything.
How to make the bar colors change based on the values?
I want the NordPool electricity price data chart to show the high price bars red, middle orange, low green etc, but I want them to be set depending on the max price of the particular day, lets say, the max shown price of the cart today is 50 EUR, so the 80%-100% of the max price will show up red, 60%-80% orange etc.
Currently I have them set as 0-10 EUR = blue 10-20 green etc. But that's not convenient if all the hourly prices of the day are, lets say in a range of 0-10 - then all the bars are shown in blue.
SELECT COUNT(*) AS count FROM `comments` INNER JOIN `replies` ON `comments`.`comment_id` = `replies`.`reply_comm_id` WHERE CONCAT (`comment_message`, `reply_message`) LIKE ('%test%') AND `comments`.`comm_blog_id`=45;
Result for "query 1"-
Query 2-
SELECT (SELECT COUNT(*) FROM `comments` WHERE `comment_message` LIKE '%test%' AND `comm_blog_id` = 45) + (SELECT COUNT(*) FROM `replies` WHERE `reply_message` LIKE '%test%' AND `reply_blog_id` = 45) AS total_count;
Result for "query 2"-
The following are the tables-
"Comments" table-
"Replies" table-
Both have different results, but I think both "queries" are correct. Can anyone tell me which one I have to use for searching the data/string/tag/word/words (like- "test", or "test comment") from the two "tables"?
Suppose I have a tag like test or test comment and I want to search this same tag in both the replies and comments tables of the comment_message and reply_message rows and count how many times it is coming/used.
Reasons:
RegEx Blacklisted phrase (2.5): Can anyone tell me
RUNAS ERROR: Unable to run - cmd.exe
1326: Username or Password is incorrect
I encounter with this error after hitting cmd command after I create and give administrive to mentioned user. I tried every possible password. just numbers, just letters, combined them. what needs to do in this situation? Is anyone can help me?
De casualidad se halló solución a esto? Estoy realizando un proyecto escolar donde necesito guardar las fotos en una carpeta dentro de mi proyecto y enviar la ruta a la BD pero no encuentro como hacerlo. Agradecería se me dicen se se halló la solución y cuál fue.
It seems to work without warnings. Except when I navigate away from the page and do something else for a few minutes, when I check again I see my warning has been logged a couple times.
I get the familiar error: Uncaught (in promise) DOMException: The fetching process for the media resource was aborted by the user agent at the user's request.. But the backtrace points to the line with load(), not play()!
With the call to play() removed completely, I cannot get any error to show up:
This lines up with what @KLASANGUI quoted from the documentation:
Calling load() aborts all ongoing operations involving this media element
The process of aborting any ongoing activities will cause any outstanding Promises returned by play() being fulfilled or rejected as appropriate based on their status before the loading of new media can begin. Pending play promises are aborted with an "AbortError" DOMException.
The backtrace points to load(), which is somewhat confusing. While load() is what triggers the error, the play() method is where the exception is actually raised and needs to be caught. Without a call to play() anywhere, there is no error.
I am inclined to accept @KLASANGUI's answer, but it is the most downvoted one. If you disagree with their answer and my reasoning here, can you explain why?
Reasons:
Blacklisted phrase (0.5): Thank you
Blacklisted phrase (0.5): why?
Blacklisted phrase (0.5): I cannot
RegEx Blacklisted phrase (2.5): can you explain
RegEx Blacklisted phrase (1): I get the familiar error
I am running into this issue where we had to use a phone with sms to verify the account. We do not want this number publicly visible. You mentioned changing to a different number. Did you have to go through the verification process all over again with this new number, or were you able to update the listed number through some type of setting? It says you can change the information at any time through the payment profiles, but this did not work for us.
That (#19) works (if print(wb.properties) is added) but is there a way to also have it return the name of the file? Then it becomes useful in a batch scan of xls files.
Some one is jacking with my Wi-Fi camera and one name is leavit the other is Tahiti if you could help me there’s all kinds of cartoon looking naked people on there
This is very useful code, but I need to know how to limit the output to folders.
I see there is a -Directory setting, but I'm unable to get it to work.
Below is a sample of my code.
Any help would be greatly appreciated.
Dear Sir, I would like to ask you if you have the same problem regarding the options for tables, projects, data sources. When we try to run or enter them, we get an error indicating that they do not exist. Do you have the same error? And if not, could you tell me how I could solve it? Oh, it's just that this free version has these limitations.
Reasons:
Blacklisted phrase (1): Good afternoon
RegEx Blacklisted phrase (2.5): could you tell me how
I guess I would have three rules. Rule ONE which has A as it's input and temp(B) as it's output.
And rule TWO and THREE which has B as it's input and C and D as it's output.
Would this make sense. Or is this what you have? Otherwise, could you post a minimal example?
Degrading the python version solves the problem? I'm experiencing something like this, Please Help... (T.T)
I've also followed the instructions from the official web but still error:
C:\Windows\System32>.env\Scripts\activate
(.env) C:\Windows\System32>pip install -U spacy
Collecting spacy
Using cached spacy-3.8.2.tar.gz (1.3 MB)
Installing build dependencies ... error
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> [102 lines of output]
Ignoring numpy: markers 'python_version < "3.9"' don't match your environment
Collecting setuptools
Using cached setuptools-75.5.0-py3-none-any.whl.metadata (6.8 kB)
Collecting cython<3.0,>=0.25
Using cached Cython-0.29.37-py2.py3-none-any.whl.metadata (3.1 kB)
Collecting cymem<2.1.0,>=2.0.2
Using cached cymem-2.0.8-cp313-cp313-win_amd64.whl
Collecting preshed<3.1.0,>=3.0.2
Using cached preshed-3.0.9.tar.gz (14 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting murmurhash<1.1.0,>=0.28.0
Using cached murmurhash-1.0.10-cp313-cp313-win_amd64.whl
Collecting thinc<8.4.0,>=8.3.0
Using cached thinc-8.3.2.tar.gz (193 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'error'
error: subprocess-exited-with-error
pip subprocess to install build dependencies did not run successfully.
exit code: 1
[64 lines of output]
Ignoring numpy: markers 'python_version < "3.9"' don't match your environment
Collecting setuptools
Using cached setuptools-75.5.0-py3-none-any.whl.metadata (6.8 kB)
Collecting cython<3.0,>=0.25
Using cached Cython-0.29.37-py2.py3-none-any.whl.metadata (3.1 kB)
Collecting murmurhash<1.1.0,>=1.0.2
Using cached murmurhash-1.0.10-cp313-cp313-win_amd64.whl
Collecting cymem<2.1.0,>=2.0.2
Using cached cymem-2.0.8-cp313-cp313-win_amd64.whl
Collecting preshed<3.1.0,>=3.0.2
Using cached preshed-3.0.9.tar.gz (14 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting blis<1.1.0,>=1.0.0
Using cached blis-1.0.1.tar.gz (3.6 MB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting numpy<2.1.0,>=2.0.0
Using cached numpy-2.0.2.tar.gz (18.9 MB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error
Preparing metadata (pyproject.toml) did not run successfully.
exit code: 1
[12 lines of output]
+ C:\Windows\System32\.env\Scripts\python.exe C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\vendored-meson\meson\meson.py setup C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867 C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm -Dbuildtype=release -Db_ndebug=if-release -Db_vscrt=md --native-file=C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm\meson-python-native-file.ini
The Meson build system
Version: 1.4.99
Source dir: C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867
Build dir: C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm
Build type: native build
Project name: NumPy
Project version: 2.0.2
..\meson.build:1:0: ERROR: Compiler cl cannot compile programs.
A full log can be found at C:\Users\rjona\AppData\Local\Temp\pip-install-gh2n5sjp\numpy_c0236714f0af4cf395ec83d673a2a867\.mesonpy-ygxq95jm\meson-logs\meson-log.txt
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
Encountered error while generating package metadata.
See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
pip subprocess to install build dependencies did not run successfully.
exit code: 1
See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
[notice] A new release of pip is available: 24.2 -> 24.3.1
[notice] To update, run: python.exe -m pip install --upgrade pip
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
(.env) C:\Windows\System32>
Reasons:
RegEx Blacklisted phrase (3): Please Help
RegEx Blacklisted phrase (1.5): solves the problem?
No, it's not cause of the game running. You can test it while running any 2-3 programs, just alt tab so the freePIE will be 3rd or 4th in alt tab order and monitor it with Vjoy monitor and u will see. And what is your OS? WIN11 right? Same problem here on WIN11 and I can't seem to find a solution. Maybe, just maybe, turning HPET off will help.
have you solved this problem? The 4090 graphics card I'm using now has an acacia problem with you. The training at a certain node will be interrupted, and then segment fault will be reported.
Reasons:
RegEx Blacklisted phrase (1.5): solved this problem?
The solution, as far as I've understood it, is to add a security descriptor, so I worked along the example given here. At first I thought I would just deny access to NT AUTHORITY\NETWORK, but the problem is that once you set up a security descriptor, everything goes from allowed by default to denied by default, so that essentially broke my application. My solution was to allow only the user the process is running under, and deny NT AUTHORITY\NETWORK.
Full disclosure: I am by no means an expert on this, so I am not (yet) marking it as the accepted answer, since I am anything other than sure that this actually seals it up. But from what I've read, it should. Please let me know if I got something wrong, or if everything is right and I can mark this as the accepted answer.
Essentially, I ended up adding this before the code above:
HANDLE processToken;
//get Token of the process this is running in
OpenProcessToken(GetCurrentProcess(), TOKEN_READ, &processToken);
PSID currentUser;
// GetLogonSID method from https://learn.microsoft.com/en-us/previous-versions//aa446670(v=vs.85)
GetLogonSID(processToken, ¤tUser);
EXPLICIT_ACCESS ea[2];
//give the user the process is running under read and write access
ea[0].grfAccessPermissions = GENERIC_WRITE | GENERIC_READ;
ea[0].grfAccessMode = SET_ACCESS;
ea[0].grfInheritance = INHERIT_NO_PROPAGATE;
ea[0].Trustee.TrusteeForm = TRUSTEE_IS_SID;
ea[0].Trustee.TrusteeType = TRUSTEE_IS_USER;
ea[0].Trustee.ptstrName = (LPTSTR)currentUser;
PSID network;
//Initialize NT AUTHORITY\SYSTEM and deny all rights
SID_IDENTIFIER_AUTHORITY sidNTAUTHORITY = SECURITY_NT_AUTHORITY;
AllocateAndInitializeSid(
&sidNTAUTHORITY,
1,
SECURITY_NETWORK_RID,
0, 0, 0, 0, 0, 0, 0,
&network
);
ea[1].grfAccessPermissions = STANDARD_RIGHTS_ALL | SPECIFIC_RIGHTS_ALL;
ea[1].grfAccessMode = DENY_ACCESS;
ea[1].grfInheritance = SUB_CONTAINERS_AND_OBJECTS_INHERIT;
ea[1].Trustee.TrusteeForm = TRUSTEE_IS_SID;
ea[1].Trustee.TrusteeType = TRUSTEE_IS_WELL_KNOWN_GROUP;
ea[1].Trustee.ptstrName = (LPTSTR)network;
//set the entries and create the security descriptor
PACL pACL = NULL;
SetEntriesInAcl(2, ea, NULL, &pACL);
PSECURITY_DESCRIPTOR descriptor = (PSECURITY_DESCRIPTOR)LocalAlloc(LPTR, SECURITY_DESCRIPTOR_MIN_LENGTH);
InitializeSecurityDescriptor(descriptor, SECURITY_DESCRIPTOR_REVISION);
SetSecurityDescriptorDacl(descriptor, TRUE, pACL, FALSE);
Once that is taken care of, the descriptor can then be set as the lpSecurityDescriptor member of SECURITY_ATTRIBUTES:
This might not be possible considering that files being locked is a Windows thing and not a C# thing.
But I think if you use FileShare.ReadWrite this allows other users to be able to use the files while you are using them, this might be what you are looking for. It was answered in this post already:
can this same configuration (creating relying party registration bean and configuring saml2 login) using XML based configuration instead of java based configuration. If yes, can you please provide a sample for above
Reasons:
RegEx Blacklisted phrase (2.5): can you please provide
So, my team migrated from Oracle to Redhsift and we need to move the logic.
Redhsift doesn't have MODEL clause and I have trouble with implementation of this recursive logic into regular sql with windowing functions (LAG).
Would you share some hints on how to approach?
