You are close to getting it work, just do few debugging. First, open your browser and be sure you are  on the Ganache network. In your browser dev console, type
ethereum.request({ method: 'eth_chainId' })

You should get 0x1691 which is the chain id - 5777.

Let me know what you got

We run into a similar issue when trying to deploy our own CDN on cloud run and so far I have not found any work around to support downloads on the browser. Without setting a content-length header, which you cannot alongside the transfer-encoding header, the browser will have no way of knowing how big a file is and on some browsers, a file may fail to show the progress bar or even how long the download will take.

Unless you plan on doing downloads on the JS or any client, which for mobile browsers may be limited for large files, cloud run may not be the best for hosting streaming.

Hello I actually found my answer.

in mTbl i added the line

, "_Tot_Qty_Subgroup", calculate(sum(Table1[Quantity]), ALLEXCEPT(Table1, Table1[Date], Table1[Main Group],Table2[Subgroup]))

This was not working when i added a column in mTbl2.

Here’s what worked for me, strange.

Corrupted node modules, delete them and npm install again.

Running development on simulator works fine but when I try to have on my real device it gave the error.

Now it fixed.

Just replying to @happyspace and because there are not enough manual or documentation of advanced parameters for shiny datatable

A bit late I guess, but

You can make it work in shiny with, for example:

DT::datatable(  
      data=iris,  
      extensions = 'Buttons',  
      style = 'bootstrap4',  
      options = list(  
      dom="<'row'<'col-md-3'l><'col-md-6'B><'col-md-1'f>><'row'<'col-md-12't>><'row'<'col-md-6'i><'col-md-12'p>>"  
)

You can also wrap the lines to see it better

DT::datatable(  
      data=iris,  
      extensions = 'Buttons',  
      style = 'bootstrap4',  
      options = list(  
      dom="<'row'
        <'col-md-3'l>
        <'col-md-6'B>
        <'col-md-1'f>
        >
        <'row'
        <'col-md-12't>
        >
        <'row'
        <'col-md-6'i>
        <'col-md-12'p>
        >", 
)

'row' starts a new line

'col-md-value' tells the width of each element

issued resolved by installing numpy 2.1.3

Finally figure out my mistake

You need no to pick Time (in s) in the unit field, but Duration (in s)

With this configuration, the Y axis is computed correctly

Read the following article for the solution: Embed YouTube Video Responsively I tested the code, and it works perfectly.

The /MOV flag MOVES files (which is equivalent to: copy + delete original)

Replace:

robocopy $srcPath $destPath $fileFilter /MOV /E

with

robocopy $srcPath $destPath $fileFilter  /E

If the Z: drive location is a network location consider adding
/Z
Which allows for copying the content in restartable mode

If the copy is intended to be a backup of the original location you might consider adding
/COPYALL
Which will copy all file attributes, timestamps and security descriptors to ensure that, upon restore, all of the pre-existing attributes and security are already in place.

There are a number of other helpful options that you might consider based on your specific use case and you can review them by using robocopy /? on the command line.

use the --max-doc-length=<n> option. It is the max length of comments and doc strings. Make it very high if needed.

Given there's not a lot of alternatives, I would recommend going with Google's own OSV Scanner:

https://google.github.io/osv-scanner/

Simulink Rate Limiter requires a Negative Value to be input into the falling rate input. If it receives a positive value for the falling rate, it infinitely increases.

GetTaskRequest getTaskRequest = new GetTaskRequest(nodeandtaskid[0], Long.parseLong(nodeandtaskid[1]));
Optional<GetTaskResponse> response = elasticClient.getClient().tasks().get(getTaskRequest, RequestOptions.DEFAULT);

I was looking for GetTaskRequest. finally found it

document.documentElement.offsetHeight Solved the issue for me.

You need to remove the /MOV parameter which moves and not copies files

I recently faced this issue you can solve this by using spark.sql.decimalOperations.allowPrecisionLoss to true or false

Or using Pandas dataframe in pyspark. You can refer below site

https://datawithazure.blogspot.com/2025/04/when-spark-gets-math-wrong.html

Just look at this Waveshare product...

https://www.waveshare.com/wiki/RS485_TO_ETH

Create React Native project with:

npx @react-native-community/cli@latest init APP_NAME

and build ios file in xcode for first time.

It's worked for me.

In April 2025, I see that the limit is now 20.000 images per repo. https://docs.aws.amazon.com/AmazonECR/latest/userguide/service-quotas.html

Another trivial error is mistakenly adding OnModelCreating outside of the class.

disclose(get_balance()) doesn't make the value of get_balance readable.  It just makes it okay to write it to the public ledger.  Writing it to the public ledger would then make that value visible, and we want the programmer to have to explicitly write some code to acknowledge that is what they intended.

In my case, this issue was coming because of a mismatch in the Python version used to create the layer vs the Python version used to run Lambda. I downgraded the Python version of the Lambda run time to match one I used during the creation of the layer zip file. Everything worked fine.

I would like to know this as well for https://azlawnow.com/ as maybe my newer site doesn't allow?

For those who can't find View Device log in device, you can click on Open Console Instead, then drag and drop .ips that has been change to .crash into Crash Reports.

Short answer: to represent Boolean in Oracle, use data type NUMBER(1,0) where 0 represents False and 1 represents True

Long answer: when there are many possible representations or implementations of something, one should choose the one that is (1) most widely adopted, (2) simple, and (3) clean. This is why NUMBER, in my view, is better even than Boolean, introduced in Oracle 23. I have provided detailed explanation here, because there exists another, duplicate thread on the same topic:
https://stackoverflow.com/a/79555398/17329826

Since the STM32F407 has 512kB flash memory, the jump address might shift depending on the memory layout. Had the same problem when I moved to a bigger MCU.

So try using this instead:

    if ((sp_value & 0x2FFC0000) != 0x20000000) 

can you try to access the pages of , {your-domain.com}/wp-admin and {{your-domain.com}/wp-login.php} , instead of {your-domain.com}/admin that you are describing that you are trying to access ?

You can respond for any futher changes.

Cheers

0

The problem is solved by downloading and saving the spark-assembly jar onto the HDFS cluster and adding this property to the eclipse code set("spark.yarn.jar" "hdfs//namenode:8020/

Having the same issue here too.

my code for font is simple

const notoFont = Noto_Sans_KR({
  subsets: ["latin"],
});

It doesn't make error when I start my project with "run dev" command. It only makes error when I build my project with "run build" command. I tried deploying my code to actual server even though it makes error when build, and it works well on deploy environment.

I don't know what is the problem. Maybe SSL?

I would start by logging the output to a file: java YourJavaApp > output.log 2>&1.

As the maintainer of Django-Tenants. I would would recomend you use Django-Tenant-users.

Visual Studio has code folding too, but code folding isn't the same as Region.

I love XCode's code folding, but sometimes it's not enough.

I've run into this several times over the past few days, the closest code-folding point sometimes hides part or all of what I need to work on.

"Region" is a line-by-line selection where the developer can choose exactly which lines need to be hidden, and it is extremely helpful

I solved using root.bind at the end of code. Then I didn't use event.widget but root.wsinfo_width() and height() then I made it int and divided by the 3 to have the needed size. Then resize the photo. Resize but is very slow delay the change. I will upload the code. Maybe exist a better way.

Could you provide more information about tsconfig.base.json, tsconfig.app.json and tsconfig.editor.json? This info could help resolve your issue.

Maybe I had similar ussue: VSCode showed the same error, but my code worked. I fixed that problem by adding tsconfig.editor.json to the app folder.

Also, it would be helpful, if you provide info about index.ts file in @shared lib

Docs about aliases in NX: https://nx.dev/blog/managing-ts-packages-in-monorepos#fixing-relative-imports-with-typescript-path-aliases

I solved the problem by making this hidden folder Sourcetree visible from the file explorer

C:\Users\<your user>\AppData\Local\Atlassian\SourceTree

Turns out that is that this is essentially a flaw of Spark, and the correct solution is to use Iceberg to partition data to use storage-partitioned joins: https://medium.com/expedia-group-tech/turbocharge-efficiency-slash-costs-mastering-spark-iceberg-joins-with-storage-partitioned-join-03fdc1ff75c0.

By default, Magento 2 cannot send mails via SMTP. The easiest way to achieve SMTP mails is via 3rd party extension. There are free extensions like this one on Github: https://github.com/mageplaza/magento-2-smtp Alternatively, you can do the whole implementation by yourself writing a custom module.

I have the same problem, I tried:

dataSource = computed(() => new MatTableDataSource(this.data()))

In my html file I have this:

table mat-table [dataSource]="dataSource()"...

It works for the data but not for the Sort...

So I tried:

ngAfterViewInit(): void { this.dataSource().sort = this.sort; }

But that does not work either...

Using gradient_checkpointing_kwargs={'use_reentrant':False} instead of gradient_checkpointing=False might work.

Yes, you can deploy your Next.js app without a Node.js server using next export. This turns your app into static HTML files.

1. Run next build && next export to generate static files.

2. Upload the out folder contents to your PHP hosting (public_html).

3. Ensure Laravel API has CORS enabled for API requests.

4. If routing breaks, add an .htaccess rule to redirect all requests to index.html.

Limitations: No SSR, no API routes, and no middleware.

Alternatives: If you need these features, use Vercel, Cloudflare Pages, or a VPS with Node.js.

You can use eb appversion --create to create an application version, without specifying an S3 bucket, see https://github.com/aws/aws-elastic-beanstalk-cli/issues/29#issuecomment-892079375 and https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/eb3-appversion.html

I wanted to post what solved my issue. The root cause was because my Cloud Function call had an extended route and parameters associated with it, which was causing issues when getting the client with getIdTokenClient.

I was originally calling getIdTokenClient('https://REGION-PROJECT_ID.cloudfunctions.net/FUNCTION_NAME/ROUTE?PARAMETER=ARGUMENT') with the extended route and parameters included. Instead, I should not have been including the extended route and parameters, only the actual function URL. So it would look something like this instead getIdTokenClient('https://REGION-PROJECT_ID.cloudfunctions.net/FUNCTION_NAME').

I'm not sure why it was working locally for me, maybe some other authentication settings were conflicting with the code.

I've provided some updated code below that is working when deployed to Cloud Run. A similar update would work for the code that @guillaumeblaquiere provided.

import { GoogleAuth } from 'google-auth-library';

async function callCloudFunction() {
  const functionUrl = 'https://REGION-PROJECT_ID.cloudfunctions.net/FUNCTION_NAME';
  const functionRoute = '/ROUTE?PARAMETER=ARGUMENT';
  const auth = new GoogleAuth();

  const client = await auth.getIdTokenClient(functionUrl);
  const token = await client.getRequestHeaders();

  const res = await fetch(functionUrl + functionRoute, {
      method: 'GET',
      headers: token
  });

  const data = await res.json();
  return data
}

I appreciate the responses from everyone who provided potential solutions.

Thanks to @AlexanderHoffmann. When I change androidx.appcompat.widget.AppCompatButton to com.google.android.material.button.MaterialButton, button start looking normall.

had the same error :( This worked for me: https://newrides.es/captha/

Azure Network Limits Impacting K6 Performance Testing Troubleshooting

Thanks, @arko, for guiding in the right direction, I do agree with the points you shared.

As you mentioned, when running load tests with a high number of virtual users, sometimes connection limits which results in timeouts or failures. To overcome these, follow the steps mentioned below.

As per the Microsoft doc shared, deploy a NAT Gateway in the AKS subnet and assign multiple public IPs to provide increased SNAT capacity.

Because of this the outbound traffic are possible without hitting SNAT port exhaustion limits which results in overcome the blocker mentioned.

Also refer to Stack link answered by marcor92 & also Q&A link answered by msrini-MSFT discussing on the similar issue.

Scale CoreDNS in AKS to handle more DNS queries efficiently. Additionally, optimize your K6 test script to reduce unnecessary DNS lookups by minimizing hostnames or caching DNS results when possible.

Refer:

https://learn.microsoft.com/en-us/azure/application-gateway/high-traffic-support

Answering my own question :

• not possible with GoogleChart LineChart.
• must use a AnnotationChart, and it displays a kind of scale scroll bar At the end, I changed the GoogleChart lib to use ChartJS. Seems to be more flexible in term of zoom + pan + live update.

(100 - (avg by (instance,product,country,class,job,region) (rate(node_cpu_seconds_total{mode="idle"}[30:5m])) * 100)) > 20

Ok so I was able to solve this by checking information_schema.columns table and verifing the id exists in the tables

if err := db.Table("information_schema.columns").
            Where("column_name = ? AND table_name not in (?)", "id", excludeTables).
            Pluck("table_name", &tableNames).
            Error; err != nil {
            return err
        }

I think you simply forgot the declaration in the beginning of the test:

function testbatchmintunique() external {
    string[10] memory names;
    string[10] memory descriptions;
    string[10] memory uris;

    ...
}

Try to delete node_modules/ folder and exec npm i and npm run develop

I just had the same exact error message

TypeError [ERR_INVALID_ARG_TYPE]: The "code" argument must be of type number. Received type string ('ENOENT')

I suspected and error in the build.json; then I came to this post on StackOverflow but in my case config.xml was valid.

Finally I found that the command `cordova run android` pops this error when there are no device available! (no device or an offline device)

I was working remote and the connected device was offline. I added and ran an emulator and it worked.

Bad error messages are killing us :(

I am just coming here to understand that how i can host my Nextjs website without nodejs .

These procedure helped very well but after using laravel API My DEV not able switch MongoDB

ANy solution ?

remember that in C everything global (or func static) is .bss, zeroed as default

I have answered in the post above, pls if anyone knows what is going on with the first program pls inform me.

Appending @Nikolaj's answer, please make sure that the path is a proper string

In my case, it was erroring out due to the comma because of incorrect commenting

file_name = 'dir/something.fits', # zshift = 1.738
hdus = fits.open(file_name)

Simply making it

file_name = 'dir/something.fits' # zshift = 1.738
hdus = fits.open(file_name)

solved the problem.

The error message says that some files are missing. Check to ensure you have ./components/ui/accordion.tsx ./components/ui/button.tsx and have defined @/lib/utils

It's also a good idea to setup a Linter (EsLint comes by default in NextJS) which should highlight such errors before build time.

You can do it with Raku/Sparrow :

within: :0:
regexp: "/" (\w+) ".tsv" \s+
end:


code: <<RAKU
!raku

for captures()<> -> $c {
  say $c<>.map({$_ ~ ".tsv"}).join(" ");
}
RAKU

The credit goes to @Fen Han who provided the answer in the comments.

For those looking for the MS documentation that describes Visual Studio file nesting options, the link is: https://learn.microsoft.com/en-us/visualstudio/ide/file-nesting-solution-explorer?view=vs-2022

Note that the above link deals with file nesting in the IDE only. web.config transformations still have to be handled depending on the project type.

Thanks again.

According to Mailgun's documentation: https://documentation.mailgun.com/docs/mailgun/user-manual/sending-messages/#batch-sending, you should use recipient-variables when sending batches to ensure that Mailgun will send individual emails to each to recipient.

This ensures that you only need to make one API call per 1000 recipients.

The powershell SDK these days does have this now:

https://learn.microsoft.com/en-us/powershell/module/microsoft.graph.users/update-mgusermailboxsetting?view=graph-powershell-1.0#notes

Update-MgUserMailboxSetting -UserId "[email protected]" -AutomaticRepliesSetting @{ status = "scheduled"; ... }

What fixed this for me was to change "fontsize" argument name to be "font_size" and add the keyword argument to the subtitles call:

make_clip = lambda txt: TextClip(font='/usr/share/fonts/liberation-sans/LiberationSans-Regular.ttf', text=txt, font_size=fontsize, color=color)

  
# Load the subtitles
subtitles = SubtitlesClip(srt_path, make_textclip=make_clip)

I cannot response due to my reputation points is still low, but i think you are experimenting a life cicle issue, i mean, you try to fetch and place data to your variables, but your component is already mounted. Is like:

(example)

var = null

mounted texfield: label = null

var = await dataFromStore

overall, your var are setted after the textfield render

try with the method onBeforeMounted instead of onMounted to set your async data

i had ran composer update and i found this:

Your requirements could not be resolved to an installable set of packages.

  Problem 1
    - symfony/polyfill[v1.22.0, ..., v1.31.0] cannot be installed as that would require removing __root__[1.0.0+no-version-set]. They all replace symfony/polyfill-php81 and thus cannot coexist.
    - symfony/polyfill[v1.0.0, ..., v1.3.0] require symfony/intl ~2.3|~3.0 -> found symfony/intl[v2.3.0, ..., v2.8.52, v3.0.0, ..., v3.4.47] but it conflicts with your root composer.json require (7.2.*).
    - symfony/polyfill[v1.3.1, ..., v1.11.0] require symfony/intl ~2.3|~3.0|~4.0 -> found symfony/intl[v2.3.0, ..., v2.8.52, v3.0.0, ..., v3.4.47, v4.0.0, ..., v4.4.47] but it conflicts with your root composer.json require (7.2.*).
    - symfony/polyfill[v1.12.0, ..., v1.20.0] require symfony/intl ~2.3|~3.0|~4.0|~5.0 -> found symfony/intl[v2.3.0, ..., v2.8.52, v3.0.0, ..., v3.4.47, v4.0.0, ..., v4.4.47, v5.0.0, ..., v5.4.47] but it conflicts with your root composer.json require (7.2.*).
    - __root__ is present at version 1.0.0+no-version-set and cannot be modified by Composer
    - Root composer.json requires symfony/polyfill * -> satisfiable by symfony/polyfill[v1.0.0, ..., v1.31.0].

Delete all in composer.json like "replace":{ /* all here was delete...*/ }

Ran composer update and composer require symfony/polyfill

IT WORKS !!!

You can do it by using org.apache.commons.io.IOUtils#copy class from Apache Commons IO (to copy) and java.io.OutputStream#nullOutputStream from java (to ignore reads).

IOUtils.copy(inputStream, OutputStream.nullOutputStream());

Pyomo supports conic constraints via the Kernel interface. You can find example models illustrating the use of conic constraints on Pyomo's github repo in the pyomo/examples/kernel/mosek directory.

To learn more about conic constraints, I suggest you look at the MOSEK Modelling cookbook.

Using position: absolute on hover: Prevents .component-a from affecting .component-b's position.

Expanding width correctly: The new width (420px) covers .component-b without pushing it.

Maintaining layout: left: 0; ensures .component-a stays in place while expanding.

For whom who get same error, you just need to make sure that your messages method in your request file return an array like this :

   public function messages()
    {
        return [

        ];
    }

Dit you get this working DurandA ?

I keep on getting errors caused by valueSubscriptionInfo

Alternative approach using Byrow

You can also achieve the desired result using the formula below:

Sample Formula

=SUM(BYROW(A2:A, LAMBDA(x, IF(x<>"", x - INDEX(B:B, ROW(x)), 0))))

Sample Output

References:

BYROW

LAMBDA

INDEX

If You are just upgrade you android studio , then you find this kind of issue for that we should follow this step to resolve this issue

STEP1 : Check out you AGP Version and Gradle Version (it should be compatible with each other )

STEP2: Check out the dependecy as well otherwise you will be get

(java.lang.NullPointerException: Cannot invoke "String.length()" because "<parameter1>" is null)

Solution : enter image description here (solution Images for (java.lang.NullPointerException: Cannot invoke "String.length()" because "<parameter1>" is null))

enter image description hereenter image description here

make sure your <link rel="stylesheet"> is inside the head of your _Host.cshtml

if that doesnt work

Q) why dont u load your CSS early

in your Pages/_Host.cshtml MODIFY your link

<link rel="preload" href="css/app.css" as="style" onload="this.onload=null;this.rel='stylesheet'">

<noscript><link rel="stylesheet" href="css/app.css"></noscript>

for this trick make sure u enalbe JavaScript

Create a new GitHub repository using the + icon. Once the repository is created, a link will be displayed to upload existing files on the repository's page. Click on that link. It will provide the following options to upload files & folders.

• Drag & drop files / folders directly inside the pane

• Browse & select files / folders by clicking on the + icon inside the pane

gm technicalerror620!

You need to pass it a CompactTypeVector that you can construct with new CompactTypeVector. 
Since you've exported Role, there should be a type definition for it in your compiled contract.

Check out the docs: https://docs.midnight.network/develop/reference/midnight-api/compact-runtime/classes/CompactTypeVector.

I've successfully submitted a bug report. If you are interested and want to follow its progress you can track it using JDK-8353342.

It's been assigned priority P4, so may take a while to get fixed.

Simultaneous multiple key press release delay can be a major challenge when trying to distribute your news efficiently. Delays in press release distribution can result in missed opportunities, reduced engagement, and a lack of media coverage.

At Prwires, we eliminate these delays with our instant and efficient press release distribution service. Our advanced press release network ensures that your news reaches top media outlets, journalists, and target audiences simultaneously, without any delays.

Why Choose Prwires?

Fast & Reliable Distribution – Your press release is published and distributed in real-time.
Massive Media Reach – We connect your story with leading news platforms and journalists.
SEO-Optimized Releases – Boost your online visibility and search engine rankings.
Global & Targeted Distribution – Get your news in front of the right audience, at the right time.

With Prwires, you never have to worry about press release delays again. Let us handle the distribution while you focus on growing your brand. Get started today and make your news heard instantly! 🚀

For me it's not working. Error:
Warning: scandir(): (errno 22): Invalid argument

Bonjour

pensez à verifier les appels Zos / Luw

j'ai eu cette erreur sur des calls CALL SYSIBM.DB2CON_LIC exclusifs à Zos sur ma DB db2 luw.

Cdt

import pyscreeze

i = pyautogui.locateOnScreen(...)
yourhand_loc = pyscreeze.Box(
            i.left + 50, 
            i.top + 50, 
            i.width+50, 
            i.height+50
        )

Why this might happen:

1. The file is missing
   Even though the path is there, the actual file might not be in the correct place.

2. The path is wrong
   The program might be looking in a different folder than you expect. It might be using a relative path (like just myfile.txt), which depends on where the app runs from.

3. It's a file from resources, but used like a normal file
   If the file is inside src/main/resources, you can’t use new File("myfile.txt") directly. You need to load it like this:

   InputStream input = getClass().getResourceAsStream("/myfile.txt");

Your useEffect is your issues. Its dependencies are shared values, but those won’t trigger the effect to run since their shallow equality stays the same across renders (like refs!). Try making your index a state value.

Optimize your regex by using non-greedy quantifiers, atomic grouping, possessive quantifiers, specific patterns, anchors, capture groups, lookaheads, lookbehinds, regex builders, and combining with HTML parsers when possible.

id="email"[^>]*+>([^<]*+)</div>.*?id="phone"[^>]*+>([^<]*+)</div>

I used the commands for my nextjs project on my terminal and got the issue solved.

rm -rf ./next ./node_modules ./package-lock.json
after that
yarn && yarn dev

I faced this exact issue , lowering the bitrate on the camera settings fixed the issue for me

Try this package: wheel_slider

https://pub.dev/packages/wheel_slider

Are u using Snowflake ? if so it might related to this:QUOTED_IDENTIFIERS_IGNORE_CASE = true

Since display entities were added i've observed the way text displays allow you to make a perfect square with a color of choice, but what does this mean? Minecraft is a simple game in terms of graphics, with text displays it's possible to re-create 2D textures, in the case of an inventory I suggest hard-coding it once and just using that as the gui, then you can make the player's camera be stuck at the point you need it at (either through tricky mounting or through packets) and spawn entities in the way you need.To go along with this, you could have a text display with a transparent dark gray color behind the fake gui to darken the rest of the worst.I also suggest looking into doing this with packets as doing so otherwise might cause some strain on the server when a lot of people are playing.

DEBUG CONFIG: To get the hex file so that it is not replaced by .elf everytimg you try to edit it in debug configurations, put the .hex frile into the main tab. you can add an elf for symbols and build later

The solution turned out to be quite simple: you have to call the operator using partial() first then expand(), like this:

SalesforceBulkOperator.partial(
      salesforce_conn_id='salesforce_conn_id',
      task_id='bulk_insert',
      operation='insert',
      object_name='Attachment',
      external_id_field='Id',
      batch_size=10000,
      use_serial=False,
  ).expand_kwargs(payload)

        $expirationToken = Str::random(40);
        $expirationTime = now()->addSeconds(2);
        Cache::put('token_' . $expirationToken, $expirationTime, 2);

check www.rioplay.in, they are protecting these contents across platform

you can try https://github.com/timematic/anytime

func main() {
    datetime, err := anytime.Parse("2006-01-02T15:04:05")
    if err != nil {
        panic(err)
    }
    fmt.Println(datetime) // 2006-01-02 15:04:05 +0000 UTC

    loc, _ := time.LoadLocation("America/New_York")
    datetime, err = anytime.ParseInLocation("2006-01-02T15:04:05", loc)
    if err != nil {
        panic(err)
    }
    fmt.Println(datetime) // 2006-01-02 15:04:05 -0500 EST
}

Did you manage to fix it? I'm currently stuck in this process.

Another way to do so is to override has_many of attachments:

class Employee < ApplicationRecord  
  acts_as_paranoid  
  
  # Override the `has_many` association for Active Storage attachments
  has_many_attached :files do  
    has_many :files_attachments, 
      -> { where(name: name) }, 
      as: :record, 
      class_name: "ActiveStorage::Attachment", 
      inverse_of: :record, 
      dependent: nil,  # Disable default deletion behavior (defined by `has_many_attached` method)
      strict_loading: false  
  
    has_many :files_blobs, 
      through: :files_attachments, 
      class_name: "ActiveStorage::Blob",
      source: :blob, 
      strict_loading: false  
  end  
  
  # Ensure attachments are purged after permanent deletion (not soft-deletion)
  after_real_destroy :purge_attachments  

  private  
  def purge_attachments  
    files_attachments.each(&:purge_later)  
  end  
end

Similarly, for has_one_attached, override the has_one method

See https://github.com/rails/rails/blob/main/activestorage/lib/active_storage/attached/model.rb

1. HOW CAN I SOLVE THIS ERROR

   Action.c(20): web_url("banglarshiksha.gov.in") started [MsgId: MMSG-26355]

Action.c(20): ssl_handle_status encounter error : SSL_ERROR_SSL, error message : error:0A000152:SSL routines::unsafe legacy renegotiation disabled [MsgId: MMSG-26000]

Action.c(20): Error -27774: SSL protocol error when attempting to connect with host "banglarshiksha.gov.in" [MsgId: MERR-27774]

Action.c(20): Error -27760: Request "https://banglarshiksha.gov.in/" failed [MsgId: MERR-27760]

Action.c(20): Warning -26200: At least one of the resources specified by EXTRARES has not been downloaded due to the above error(s) [MsgId: MWAR-26200]

Action.c(20): web_url("banglarshiksha.gov.in") highest severity level was "ERROR", 0 body bytes, 0 header bytes [MsgId: MMSG-26388]

If you catch the element by its xpath, then you can change or add styles to it as

location_selector = driver.find_element(By.XPATH, '//select[@data-placeholder="Return Locations"]')
driver.execute_script("arguments[0].style.display = 'block';", location_selector)

This answer probably depends on you auth flow, but for my case where I updated the user metadata via an API to call to my backend, then redirected user to a different page (expecting the metadata to be updated) what seemed to work is reloading the user object in the frontend, see docs: here

https://clerk.com/docs/hooks/use-user#reload-user-data

Your code currently works very well for me (android and web). All the items in the list follow each other and the scroll works well all the way to the bottom.

Perhaps the problem lies elsewhere in the code?

[b]Sampad Group[/b] has established itself as one of the most prominent Iron Oxide Manufacturers in India. With a strong commitment to quality and innovation, the company provides premium-grade iron-based products to various industries. As leading Iron Powder Manufacturers, Ferric Oxide Manufacturers, and Graphite Powder Manufacturers, Sampad Group has earned a reputation for excellence and reliability.

[b]Quality Iron Oxide Products

[/b]

As one of the top [url=https://www.sampadgroup.com/black-iron-oxide][b]Iron Oxide Manufacturers[/b][/url], Sampad Group specializes in producing high-quality iron oxides used across multiple industries. These oxides are essential in pigments, coatings, ceramics, and construction materials. The company ensures that every batch meets strict quality standards, providing customers with superior products.

[b]Reliable Iron Powder Manufacturing

[/b]

Sampad Group is among the most trusted [b]Iron Powder Manufacturers[/b] in India. The iron powder produced by the company is widely used in metallurgy, chemical synthesis, and industrial applications. With advanced technology and rigorous quality control, Sampad Group ensures the production of high-purity iron powders that meet industry demands.

[b]High-Quality Ferric Oxide Manufacturing

[/b]As one of the renowned [url=https://www.sampadgroup.com/ferric-oxide][b]Ferric Oxide Manufacturers[/b][/url], Sampad Group offers premium-grade ferric oxide used in various industrial and commercial applications. Ferric oxide is widely utilized in paints, coatings, polishing compounds, and magnetic materials. The company guarantees a consistent and high-quality supply to meet client requirements.

Excellence in Graphite Powder ProductionSampad Group is also a well-known name among Iron Oxide Suppliers. Graphite powder is an essential material in lubrication, battery production, and carbon-based applications. The company ensures precision in manufacturing and packaging to provide industries with the best quality graphite powder.

[b]

Trusted Iron Oxide Suppliers

[/b]As one of the leading [url=https://www.sampadgroup.com/graphite-powder][b]Graphite Powder Manufacturers[/b][/url], Sampad Group is committed to delivering high-quality iron oxide products to clients across India and beyond. The company’s extensive distribution network ensures timely and efficient delivery, making it a preferred choice for businesses requiring iron oxide in bulk quantities.

[b]Why Choose Sampad Group?[/b][list=1][*]Industry Expertise: With years of experience, Sampad Group has mastered the art of producing high-quality iron-based products.

[/*][*]Advanced Technology: The company employs state-of-the-art manufacturing techniques to ensure precision and purity.

[/*][*]Stringent Quality Control: Every product undergoes rigorous testing to meet industry standards.

[/*][*]Reliable Supply Chain: As trusted [url=https://www.sampadgroup.com/black-iron-oxide][b]Iron Oxide Suppliers[/b][/url], Sampad Group ensures prompt delivery and seamless logistics.

[/*][*]Customer Satisfaction: The company prioritizes customer needs and offers customized solutions tailored to industry requirements.

[/*][/list]

[b]Conclusion

Sampad Group[/b] continues to set the benchmark as one of the top Iron Oxide Manufacturers, [url=https://www.sampadgroup.com/iron-powder][b]Iron Powder Manufacturers[/b][/url], Ferric Oxide Manufacturers, and Graphite Powder Manufacturers in India. With an unwavering commitment to quality, innovation, and customer satisfaction, the company has established itself as a leader in the field. For businesses looking for trusted Iron Oxide Suppliers, Sampad Group remains the ultimate choice. Contact them today to explore their extensive range of iron-based products.

The project might be configured to use a code signing identity (certificate and private key) that doesn't exist on your system or is invalid. Please follow this steps:

1. Verify Certificates and Provisioning Profiles:

   • Xcode: Open Xcode and go to "Xcode" > "Settings..." (or "Preferences..."). Select the "Accounts" tab.

   • Ensure your Apple ID is added and your development team is selected.

   • Click "Manage Certificates..." to check the status of your certificates.

   • Click "Download Manual Profiles" to download any missing profiles.

   • Go to apple developer website, and check the status of your certificates and profiles.

2. Check Bundle Identifier:

   • Xcode: In your Xcode project navigator, select the project file (the blue icon).

   • Go to the "General" tab and check the "Bundle Identifier."

   • Compare this with the bundle identifier in your Apple Developer account and provisioning profile.

3. Clean and Rebuild:

   • Xcode: Go to "Product" > "Clean Build Folder" (Shift + Command + K).

   • Then, try building again.

4. Check Code Signing Settings:

   • Xcode: In your project settings, go to the "Signing & Capabilities" tab.

   • Verify that the correct team, signing certificate, and provisioning profile are selected.

   • Ensure that "Automatically manage signing" is correct for your use case.

Or please share more information here, so that we can understand the issue more.

My server only allows the port - 25

The revocation function was unable to check revocation because the revocation server was offline

If you're only allowing port 25 outbound then I suspect the issue is that MimeKit is unable to check the revocation status because that is typically done over HTTPS (port 443).