For anyone still running into this, you need to install Node versions through a shell with elevated privileges, but UNDER NO CIRCUMSTANCE should you run node programs as admin. Do not open your editor with admin privileges either.

After installing a Node version, make sure the path to the node.exe is in your system environment variables, e.g.: C:...\AppData\Local\nvm\v22.14.0.

you have to make also one more interface for the tunnel. As i can see you are on HTB DANTE pro lab. i asume that you current ligolo interface you named it "ligolo" so do:

sudo ip tuntap add user [YOUR USERNAME] mode tun ligolo1
sudo ip link set ligolo1 up
sudo ip route add 172.16.2.0/24 dev ligolo1

As the ligolo is running with the first pivot:

listener_add --addr 0.0.0.0:11601 --to 127.0.0.1:11601 --tcp
session 
2 
Specify a session : 2 - NT AUTHORITY\SYSTEM@DANTE-DC01
[Agent : NT AUTHORITY\SYSTEM@DANTE-DC01] » start --tun ligolo1

and the output you will get is:

[Agent : NT AUTHORITY\SYSTEM@DANTE-DC01] » INFO[6436] Starting tunnel to NT AUTHORITY\SYSTEM@DANTE-DC01 

If you have more questions feel free to ask.

I believe you have too many results which is insufficient to store in int data type.

Please try.

SELECT COUNT_BIG(*)
FROM table1
JOIN table2 ON (table1.fiscal = table2.fiscal)

I happened to have just solved this issue, this strange error seemed to appear because of one of the sub-extensions of the MPlab extension, the MPlab Clangd extension. I looked up the documentation and it said that this was an optional feature in-case of VScode for language support. So I simply disabled the warnings and the program ran smoothly from there.

You are missing registering the Annotation Processor.

You can register the annotation processor like below.

Register the Annotation Processor: Create a file named javax.annotation.processing.Processor in the META-INF/services directory and add the fully qualified name of your annotation processor class. org.bbloggsbott.annotationenforcer.EnforceAnnotationProcessor

I also accidentally hid this panel just now. I managed to get it back like this:

• Close CodeLite
• Open: C:\Users\your_username\AppData\Roaming\codelite\config\codelite.conf
• Find the line "ShowMenuBar"
• If the value "false" follows, then replace it with "true"
• Save and run CodeLite

After these actions, I got the main menu again

You should be able too index your created_at and updated_at fields in your models using:

type YourModel struct {
    CreatedAt time.Time `gorm:"index"`
    UpdatedAt time.Time `gorm:"index"`
}

I have an example for this in github.

No, you can't install recent version(s) of Node JS directly using brew, nvm, n, or macports. You tried to install Node JS 21 binary from macports, which failed (expected!) because the binary was not built to be compatible with macOS High Sierra. The highest version of Node JS binary that is compatible with High Sierra is Node JS 17.

If you still want to install Node JS 22 on High Sierra, use a binary that is custom built for macOS 10.13. Otherwise, building Node JS 22 from source will always fail if you use default Apple LLVM compiler that's shipped with High Sierra.

My sample code in github. It shows integration with Google sign-in and calendar.

SLS (Scala Language Specification) says, at https://scala-lang.org/files/archive/spec/3.4/04-basic-definitions.html ,

The scope of a name introduced by a definition is the whole statement sequence containing the definition. However, there is a restriction on forward references in blocks [...]

So this seems to be working as designed, but it isn't clear to me why it's specified this way. Why "the whole statement sequence" rather than "the following statements"?

I have been searching for a robust solution to identify the changes made in WebLogic third-party libraries (version 14) or JDK 8 and 11 that could resolve the reported issue. Despite my efforts, I have not yet found a definitive solution to completely eliminate the problem. However, I did discover a temporary workaround that partially satisfies the requirements for running the project on WebLogic 14. Naturally, this interim fix involves some modifications to the existing setup. As is widely known, Oracle WebLogic Server has used EclipseLink MOXy as the default JSON provider since version 12.1.1. However, starting with WebLogic Server 12.2.1.2, it is possible to switch to Jackson for JSON serialization and deserialization. This flexibility allows developers to choose the JSON provider that best suits their needs. In the legacy EJB application, each subsystem independently implements its own REST APIs. The REST API resources are configured through a class that extends the JAX-RS Application class. The Application class is responsible for registering JAX-RS resource classes (e.g., classes annotated with @Path) and providers (e.g., filters, interceptors, or custom message body readers/writers).

@ApplicationPath("/security") // Base URI for all resources
public class SecurityApplication extends Application {}

WebLogic Server does not include Jersey as its default RESTful web services framework. Instead, it relies on the Java API for RESTful Web Services (JAX-RS), which provides flexibility in choosing the preferred implementation. By default, WebLogic utilizes EclipseLink MOXy for JSON serialization and deserialization. EclipseLink MOXy is specifically designed for handling JSON serialization and deserialization. However, if your REST API in WebLogic processes XML, MOXy is not involved in such operations. For XML processing, WebLogic and JAX-RS implementations typically use JAXB (Java Architecture for XML Binding) by default. JAXB is a robust framework for converting Java objects to XML and vice versa. That said, it is possible to configure WebLogic Server to use Jersey instead. This can be achieved by packaging Jersey as a shared library and configuring your application to utilize it, as previously mentioned. By doing so, you can leverage Jersey's advanced features and capabilities within your WebLogic environment. The org.glassfish.jersey.server.ResourceConfig class is a key component of the Jersey framework, which is a widely used implementation of JAX-RS. This class is used to configure and customize the behavior of a JAX-RS application in a Java EE environment. ResourceConfig extends the standard javax.ws.rs.core.Application class, adding convenience methods and features specific to Jersey, thereby enhancing its functionality and ease of use. To address this issue, I implemented a class within the framework module of the legacy application that can be shared across all subsystems. This class is designed to serve as a reusable solution for anyone encountering the same problem. Instead of using the standard Application class, developers can now inherit from this newly created class to resolve the issue effectively.

public class JsonConfig extends ResourceConfig{
  public TosanRestApplication() {
    List<String> packageList=new ArrayList<>();
    packageList.add(this.getClass().getPackage().getName());
    property(CommonProperties.MOXY_JSON_FEATURE_DISABLE_SERVER, Boolean.TRUE);
    register(org.glassfish.jersey.jackson.JacksonFeature.class);
    packages(packageList.toArray(new String[packageList.size()]));
  }
}  

Therefore, any subsystem that encounters such a problem should inherit from JsonConfig instead.

@ApplicationPath("/security") 
public class SecurityApplication extends JsonConfig {}

In this case, I added the package name of the current class to the packageList. Next, I registered the Jackson feature to enable JSON processing. Finally, I configured the Jersey application to scan the specified packages for resources and providers. This approach proved to be an effective solution, successfully resolving the issue.

I got it working only by adding this line: <string name="server_client_id">[WEB_CLIENT_ID and NOT ANDROID_CLIENT_ID]</string> inside app/src/main/res/values/strings.xml

In order to remove RefObjModel, you have to delete it from it's corresponding model.

Usually it is not preferable to modify the migration files manually (unless a person really really knows what he is doing)

After modifying the model if you then rerun the migrations again I believe the RefObjModel won't appear.

In trying to execute this command in both windows and unix I had issues. I could get one to work but then the solution stopped the other from working.

Unix php ../../folder/file.php "a=10&b=20" works in cmd line Wnds php H:\folder1\folder2/folder/file.php "a=10&b=20" works in cmd line

but from within php script shell_exec would remove space between cmd and args. so cmd would look like php "../../folder/file.php""a=10&b=20" and would fail.

Solution add a '%' to the command $cmd = 'php '.escapeshellarg("../../folder/file.php").' % "a=10&b=20"';

The '%' allowed the space to remain in the cmd and the file.php had one line of code to str_replace('%','',$argv[1]) to remove it.

BTW I use this technique so that the file.php can be called either from web url or cmd line...

if (!isset($_GET['a'])) parse_str(implode('&',array_slice($argv, 1)),$_GET);

Adding lower bounds on data-default-class and data-default resolved my issue. Thanks @Li-yao Xia

- data-default-class >= 0.2
- data-default >= 0.8.0

Another approach to improving performance is to split your keys using Redis logical databases: https://redis.io/docs/latest/commands/select/

Given that we don't have a dockerfile, my best guess is that you followed the instructions (https://docs.datadoghq.com/serverless/aws_lambda/installation/python/?tab=containerimage) and then didn't correctly set the DD_LAMBDA_HANDLER environment variable that tells Datadog where to redirect the request. If you don't, it won't be able to find your function an you'll get an import error just like the one you desribed.

Please add a dockerfile next time! It'll be much easier to help you get a solution.

Thanks to scai!

The code to make Mercator projection from OpenStreetMaps:

local function mercatorY(lat)
    local radLat = math.rad(lat)
    return math.deg(math.log (math.tan(radLat) + 1/math.cos(radLat)))
end

Map: https://osm.org/go/0JAeZ7oTQ

Just have to include, at the top of the qmd file:

---
fig-cap-location: top
---

Use frame.setVisible(false); frame.setVisible(true);

In addition to what @somethingsomething said, in cases like this, instead of assigning access to individual users, the domain acts as a principal in IAM. Meaning anyone with an email address from that domain example.com will be granted the specified permissions when accessing the GCP project.

Google Cloud IAM allows granular access control with roles: you can choose a specific IAM role to assign to the domain and define the level of access the users from that domain will have within the project (e.g., "Viewer" for read-only access, "Editor" for read-write access).

I already fixed, it was an issue with how my /users route is handled

I am new to Python but I have worked in CADD for several years. This sounds like an object enabler issue within the Autodesk program. You may need to download an object enabler for the specific program you are using. Below is the link of where to go for that. It is at least worth checking.

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Download-Object-Enablers.html

0[xX][0-9a-fA-F]+(\.[0-9a-fA-F]+)?([pP][+-]?\d+)?.

Pretty simple. The pP[+-]?\d+ part is for detecting hex exponents, which use P instead of E like base 10 exponents do.

you can put an hidden component that implements MatFormFieldControl like input inside the mat-form-field component

1. Understand Wayland’s Threading Model
2. Initialize Wayland Connection (Main Thread)
3. Spawn a Separate Thread for Event Handling
4. Render in a Separate Thread
5. Synchronize Threads Properly
6. Clean Up Properly

Key Takeaways ✅ Use one dedicated thread for handling Wayland events. ✅ Use another thread for rendering but protect shared resources with mutexes. ✅ Never call wl_display_dispatch() from multiple threads simultaneously. ✅ Properly synchronize access to shared Wayland objects (e.g., buffers, surfaces).Key Takeaways ✅ Use one dedicated thread for handling Wayland events. ✅ Use another thread for rendering but protect shared resources with mutexes. ✅ Never call wl_display_dispatch() from multiple threads simultaneously. ✅ Properly synchronize access to shared Wayland objects (e.g., buffers, surfaces).

I have a question about this, does GLMM model like above show inflated type I error as the sample size seems limited. If so, what is a proper way to analyze the effect of "var" and how to do post-hoc?

This code works:

<Image.ToolTip>
    <ToolTip Content="{Binding ToolTipText}" ToolTipService.InitialShowDelay="10">
        <ToolTip.Visibility>
            <MultiBinding Converter="{StaticResource TTVisConv}">
                <Binding Path="ShowToolTip"/>
                <Binding Path="ToolTipText" />
            </MultiBinding>
        </ToolTip.Visibility>
    </ToolTip>
</Image.ToolTip>

On this post suggested in the comments, they explain that ToolTip/Popup/ContextMenu are drawn on another window that shows on top of the main one, thus having a different visual tree; this means that ElementName and RelativeSource can't be used in this case, as they'd search the ToolTip's visual tree and not the main one, finding nothing. That's why it wouldn't work.

I'm not sure why the ToolTip can still access the main windows's DataContext despite being on a different window, but I'll leave that for another question.

SELECT *
FROM parent p
JOIN child c ON p.parent_id = c.parent_id
WHERE c.child_id = (
    SELECT child_id
    FROM child
    WHERE parent_id = p.parent_id
    ORDER BY created_at DESC
    LIMIT 1
);

Caption locations can be controlled by using the fig-cap-location option. You can set this to top for positioning the caption above the images (in HTML and PDF formats):

---
format: html
fig-cap-location: top
---

::: {layout-ncol="3"}
![Figure 1](fig.png)

![Figure 2](fig.png)

![Figure 3](fig.png)
:::

You might want to setup cloudwatch logs to see if there is any API throttling from the Opensearch cluster. In my experience when I call many API's concurrently AWS tends to limit them.

press "F1" > open user settings json

add config :

  "terminal.integrated.defaultLocation": "editor",

  "terminal.integrated.profiles.windows": {
    "warp": {
      "path": "C:\\Users\\ronal\\AppData\\Local\\Programs\\Warp\\warp.exe", // path of warp.exe
      // "args": ["/K", "C:\\cmder\\vendor\\bin\\vscode_init.cmd"]
    }
  },
  "terminal.integrated.defaultProfile.windows": "warp",

usage: "f1" > "create new terminal"

edit "shortcut"

my only solution was to create a new project. please consider to change/update these files/folders from the old project:

AndroidManifest.xml, assets, lib, pubspec.yaml, res, key.properties, signature

After additional research, I concluded that the scenario I’m trying to build won’t work. Resource: https://medium.com/google-cloud/executing-google-apps-script-with-service-account-3752f4e3df8c

AWS notified on January 2024 that an issue was detected with policies calling the Glue Create*, allowing the creation of resources with tags regardless of wether they have an “Allow” or “Deny” for the glue:TagResource IAM action.

They have fixed the issue on April 30, 2024.

This was notified and was able to see in the scheduled changes in AWS health dashboard, unfortunately the changes in the health dashboard has a 3 months range from start date.

If you has found a similar issue, I recommend opening a support ticket through the AWS console.

I got it working only by adding this line: <string name="server_client_id">[WEB_CLIENT_ID and NOT ANDROID_CLIENT_ID]</string> inside app/src/main/res/values/strings.xml

In your perform action make a forward to the show action. The single view is reloaded and the form shows the next step or performs the finishers.

public function performAction(): ResponseInterface
{
    return new ForwardResponse('show');
}

For the moment it is not possible to migrate automatically the old widget to the Glance version.

A ticket is open at Google : https://issuetracker.google.com/issues/294137086

In my case, the old widget is deleted when I install a new version of the app with the Glance. The only way that I find, is to store the data from the old widget (Data Base, Share pref...). And when the user wants to create the new widget (Glance version), I get the data from the old widget and I display them directly after the creation.

I had a similar need - show an outline on focus (when tabbed into the button or link) but show no outline during a mouse click. I initially used :focus and :active. That worked for a regular button but it did not work for submit button or links. So I had to use :focus-visible instead of :focus. This got rid of the outline during mouse click but retained outline for tab focus.

&:focus-visible {
      box-shadow: 0 0 0 1.5px $brand-blue-60, #fff;
      outline: 1.5px solid $brand-blue-60; // Set the outline color
      outline-offset: 2.5px;
    }
    &:active {
      box-shadow: none;
      outline: none; // Set the border color
      outline-offset: 0;
    }

Did you ever fix this?

I had this working some years ago, but now I'm getting something similar to you

I don't know if this going to help you but this line fix my problem:

distributionUrl=https\://services.gradle.org/distributions/gradle-8.9-all.zip

put this line in android/gradle/wrapper/gradle-wrapper.properties

You install the yfinance?

pip install yfinance

This work here. Try to create a virtual environment first (https://docs.python.org/3/library/venv.html) I used yfinance in this repository, take a look, i hope that can help you https://github.com/Douglas019BR/COWDOL

This isn't really an answer, it's more like a workaround, but here's how I eventually got it to work:

Instead of using the "FSBackend{FSBackendOptions{}}" nodes, I simply went with the standard "backend" node in the .init method. That seems to have solved the problem.

i18next 
.use(FSBackend)
.init({
lng='en'
    backend:{loadPath: "C:\Users\myuserpath\OneDrive - MyStuff\QA-Automation\locales\en\NAMESPACEFILE.page.json",},
 }

This may be a bug or issue with the FSBackend or the FSBackendOptions. I will have to research it a little more and see if others are experiencing the issue, and perhaps file a bug report.

I had to use a variation of suggestions I'd found elsewhere to get this to work in VSCode. In my .zprofile I had to fence my long-running function with:

if [[ "$VSCODE_PID" = "" ]]; then
    DO THE THING...
fi

You are doing a lot of things while still within the request handler , these things are simply taking longer than a reasonable HTTP timeout.

Maybe you could decouple the incoming request from the action , so the incoming request sets a flag which is polled for by a service which does the work outside the request.

It seems that "AppServiceConsoleLogs" doesn't support multiline logs. You may need to config your logger to write logs to "AppServiceAppLogs". I will update this answer after fixing my issue. Not having time to fix it yet.

I usually set two different variables for the minutes and seconds and then subtract one from the minutes once the seconds reach zero and then reset the seconds , like so:

if(secs==0){
  mins--
  secs=60;
}

it keeps looping and resetting back to the default date.

Does `default date mean the date one month after the startOn date?

I'm a bit confused by the question and would like clarification. Based on your code, I assume the flow would then be:

API Response -> setPaymentData(data) -> User manually updates renew date -> Reset back to old value

I saw you checking the condition of data.results.paymentSummary.startOn && data.results.paymentSummary.renewOn, as well as data.results.paymentSummary.startOn individually, but did not see you check when data only has renewOn, are you missing that case or is it intentional?

Maybe adding case where data.results.paymentSummary.renewOn is not null and add logic there will solve the problem?

else if(data.results.paymentSummary.renewOn) {
  renewOn = localIsoString(data.results.paymentSummary.renewOn).slice(0,10); // Keep startOn the same
}

Also sorry for my two cent, but I think your code is mixing between snake_case and camelCase for property names which is not an ideal way to code JS, better keep it consistent by using camelCase, snake_case are mostly used for naming variable.

Your code flow

All available patterns are listed in the summary of the PatternLayout class. Source is available on the link below

https://github.com/apache/logging-log4net/blob/1946fed21316d21125aa66ac08979d037cb6894e/src/log4net/Layout/PatternLayout.cs

Spring Boot comes with a single thread for TaskScheduler by default: https://docs.spring.io/spring-boot/reference/features/task-execution-and-scheduling.html.

You may consider to increase its pool:

spring.task.scheduling.pool.size=10

Also, it is strange to see preventDuplicates(false). That means that the same file might be picked up by the next polling cycle. I understand that you delete those files, but that still might be an issue.

Any chances that you can share with us a simple project to reproduce on our side?

If you not specify context_object_name in class based view (ListView) than default is created and is object_list instead of page_obj. Solution is by two way:

• First you already get from Dave
• Second is to specify context_object_name and than you will get automatically page_obj

Currently mongodb calls are not supported in Next.js middleware because middleware edge runtime nature is not compatible with mongodb adapter for connection.

There are alternatives to approach this here: https://medium.com/@chxiuy/mongodb-in-nextjs-overcoming-the-edge-runtime-middleware-hurdle-4beee31eaa30 and an official discussion about it here: https://github.com/vercel/next.js/discussions/46722

My work around for this has been to send myself an email with the subject "inbox zero" and a body that says "good job on getting through all your email!" It just sits at the bottom of my inbox.

Closest thing I've figured out how to achieve inbox zero in Outlook.

Use chromedriver with selenium

I believe the commenters have handled this question rather well. Racket is not itself a constraint logic programming language, but it is a programming-language programming language, and so it is a great substrate. There are a goodly number of ways to perform logic and constraint-logic programming within Racket, and the right approach for you might depend on the particular problems you're interested in solving and the kinds of constraints you are after.

I do not know of a CLP(R) system in Racket, but cryptarithmetic puzzles certainly can be solved with variants of miniKanren and probably other approaches.

I think the most important general answer to your question is that in Racket, even a "worst-case scenario" of needing to build a new language can be a pretty pleasant experience.

git remote remove origin

You can check this command

# Ignore all directories except specific ones
/*
!/RCUFromUR/
!/RCUToB360/
!/RCUToUR/
!/Tools/

# If you want to exclude subdirectories from being tracked under the above folders, you can add these
!/RCUFromUR/*/
!/RCUToB360/*/
!/RCUToUR/*/
!/Tools/*/

I tried that once and it was great until I used overflow: hidden, I don't know why but everything was still visible. After I tried everything I added a wrapper it worked. Why I didn't used it in the first place was that website was a assignment that couldn't use div, only semantic structure. I wouldn't do that if you don't have that requirement.

You should ask yourself why the element is the child of the transformed element and if you shouldn't do the obvious and move the element higher up in the hierarchy since you essentially want to render it with a fixed position.

I know this isn't always possible but keep it in mind.

I honestly appreciate that this behavior exists as it powers many of my canvas-like projects. I usually use transform just to force a new viewport to ensure all content within doesn't escape the scope in terms of position and scale.

Why don't you use MatrixSymbol? Following Smichr's advice, your solution could look like this:

M, m = MatrixSymbol('M_m,n', 3, 3), MatrixSymbol('m', 3, 3).as_explicit()
s= '{}={}'.format(latex(M), latex(m))
display(Math(s))
s= 'diag({0})={1}, U({0})={2}, L({0})={3}'.format(latex(M),  latex(m.multiply_elementwise(eye(3))), latex(m.upper_triangular(0)), latex(m.lower_triangular(0)))
display(Math(s))

Adding The Main class in the annotation worked Thanks Tony

Finally I have found a work around. Just append the .frame(height: 200.0) modifier to the VStack with a value large enough to display the table. If the value is too small, the table won't be rendered.

According to the documentation, the first argument of the find_previous_sibling function can be a list.

Have you tried this ?

heading = div.find_previous_sibling(['h1', 'h2', 'h3', 'h4', 'h5', 'h6'])

Just click “Download zip” on this commit, manually re-add the files to a repository and push it

Use encodebase64.com if you want to do it manually.

ввиду того, что этот пост гугл выдает первым - оставлю для потомков:

Необходимо переустановить virtualenv

sudo apt purge python3-virtualenv

sudo pip3 uninstall virtualenv
sudo pip3 install virtualenv

Источник

For whom is working with react 19, Tailwind v4 in 2025: First, I edited all config files then the last step I installed the canary version:

npx shadcn@canary init

https://ui.shadcn.com/docs/tailwind-v4

I found a desicion - need to created stepped report Some useful links:

https://sqldusty.com/2011/07/23/creating-stepped-reports-with-ssrs-2008/

https://learn.microsoft.com/en-us/sql/reporting-services/report-design/create-a-stepped-report-report-builder-and-ssrs?view=sql-server-2017

For whom is working with react 19, Tailwind v4 in 2025: First, I edited all config files then I installed the canary version: "npx shadcn@canary init"

https://ui.shadcn.com/docs/tailwind-v4

This should work for the tender value:

       epo:refersToProcedure 
        [
          epo:hasEstimatedValue  
          [
            epo:hasAmountValue ?estimatedValue ;
            epo:hasCurrency ?currency;
          ];
          a epo:Procedure
        ] ;

If you figured out how to recieve the deadline, let me know it please. I have the same issue.

enter link description here

[enter link description here][2

Blockquote

]

1. List item

Thanks to all of the answers, at the end it seems that currently there's no way to disable the transactions + pipe-lining in the typical database clients (pgadmin4, dbevaver), so I resorted to use the command line for postgres reindex.

I converted the reindex queries to this:

reindexdb -v --concurrently -d alx -i public."l2016mgix"
reindexdb -v --concurrently -d alx -i public."l2017dhix"

With the added benefit that with the -v, I get a small duration report after each reindex has been done.

Problem was that row was locked in another pending transaction for days

I don't know how to resolve it, I will be moving to react-native-select-dropdown or other component.

This is fairly neat. Doesn't require list size and the generator provides lazy evaluation, no itertools requirement also.

def cycle_through_list(lst):
    while True:
        yield from lst

Alternatively you can apply this formula if PIVOTBY is available.

=DROP(PIVOTBY(SCAN(0,SEQUENCE(ROWS(A3:A30)),
LAMBDA(ini,arr,SUM(N(INDEX(A3:A30,1):INDEX(A3:A30,arr)
=INDEX(A3:A30,arr))))),A3:A30,B3:B30,SINGLE,,0,,0),,1)

You could do it with CDO, using the intlevel or intlevel3d.

Try:

cdo intlevel,3.643,7.595,14.36 input.nc output.nc

where you specify the exact levels of the lev variables to use (like 3.643,7.595,14.36). For more details look at intlevel, intlevel3d discussion

You might be able to achieve this with your own custom language - see e.g. Monaco Playground > Custom Languages and a related GitHub project. See also https://github.com/microsoft/vscode/blob/main/extensions/log/syntaxes/log.tmLanguage.json for the VS Code log syntax regexps.

In iOS you can do like this

// viewCount is key set in flutter
    let viewCount = UserDefaults.standard.integer(forKey: "flutter.viewCount")
    print("View Count: \(viewCount)")

This saved my day, thanks a lot!

In case the OP was also asking why the PPID of the subshell is equal to the PPID of the shell (both 143), the answer is

A subshell is a copy of the shell process.

(ref. Bash Manual Page, sec. Command Execution Environment).

If you have multiple large tiles or raster layers

library(terra)
rlist <- c('r1.tif', 'r2.tif', 'r3.tif')

Function vrt from is faster and maintains the raster data

rr <- vrt(rlist)

For whatever reason, poetry self add poetry-plugin-shell did not work, however installing the individual packages one at a time using pip did work. After installing each package I was able to run poetry shell and utilize my existing virtual environment.

I use be bellow code that can also upload file, but I don't know how to process the data next?

let future = async {
                    let file = rfd::AsyncFileDialog::new().pick_file().await;
                    file.unwrap().read().await
                };
                let data = async_std::task::block_on(future);

This helped me to resolve the issue. Had to add "loadFile "C:/xampp/php/libsodium.dll"" to my httpd-xampp.conf file and then restart Apache. Worked first time, thanks Kifah!

For some reason Azure was receiving a compressed file, so I unzipped in Kudu and it works.

Hi, I have updated from tomcat-embed-core 10.1.34 to 10.1.35 and using spring-boot-starter-parent 3.3.6. this gives me similar error as below:

Is this similar to above

'java.lang.reflect.InaccessibleObjectException: Unable to make field static final boolean java.io.FileSystem.useCanonCaches accessible: module java.base does not "opens java.io" to unnamed module @185a6e9 at java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:354) ~[na:na] at java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:297) ~[na:na] at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:178) ~[na:na] at java.base/java.lang.reflect.Field.setAccessible(Field.java:172) ~[na:na] at org.apache.tomcat.util.compat.JreCompat.(JreCompat.java:101) ~[tomcat-embed-core-10.1.35.jar:10.1.35] at org.apache.catalina.startup.Tomcat.(Tomcat.java:1193) ~[tomcat-embed-core-10.1.35.jar:10.1.35] at org.springframework.boot.web.embedded.tomcat.TomcatServletWebServerFactory.getWebServer(TomcatServletWebServerFactory.java:203) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.createWebServer(ServletWebServerApplicationContext.java:188) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.onRefresh(ServletWebServerApplicationContext.java:162) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:619) ~[spring-context-6.1.14.jar:6.1.14] Wrapped by: java.lang.ExceptionInInitializerError: null at org.apache.catalina.startup.Tomcat.(Tomcat.java:1193) ~[tomcat-embed-core-10.1.35.jar:10.1.35] at org.springframework.boot.web.embedded.tomcat.TomcatServletWebServerFactory.getWebServer(TomcatServletWebServerFactory.java:203) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.createWebServer(ServletWebServerApplicationContext.java:188) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.onRefresh(ServletWebServerApplicationContext.java:162) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:619) ~[spring-context-6.1.14.jar:6.1.14] at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.refresh(ServletWebServerApplicationContext.java:146) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.refresh(SpringApplication.java:754) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.refreshContext(SpringApplication.java:456) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.run(SpringApplication.java:335) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.run(SpringApplication.java:1363) ~[spring-boot-3.3.6.jar:3.3.6] Wrapped by: org.springframework.context.ApplicationContextException: Unable to start web server at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.onRefresh(ServletWebServerApplicationContext.java:165) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:619) ~[spring-context-6.1.14.jar:6.1.14] at org.springframework.boot.web.servlet.context.ServletWebServerApplicationContext.refresh(ServletWebServerApplicationContext.java:146) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.refresh(SpringApplication.java:754) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.refreshContext(SpringApplication.java:456) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.run(SpringApplication.java:335) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.run(SpringApplication.java:1363) ~[spring-boot-3.3.6.jar:3.3.6] at org.springframework.boot.SpringApplication.run(SpringApplication.java:1352) ~[spring-boot-3.3.6.jar:3.3.6] at nl.rabobank.gict.mcv.orv.productversions.OrvProductVersionsServiceApplication.main(OrvProductVersionsServiceApplication.java:11) ~[classes/:na] ' Process finished with exit code 1

Docker selenium automaticli defines the mode to be offline: https://github.com/SeleniumHQ/docker-selenium/blob/trunk/NodeBase/Dockerfile#L181

variable: SE_OFFLINE="true" \

in all child components you need to add [CascadingParameter]. did you?

@code {
    [CascadingParameter]
    public ShoppingCartModel? CartModel { get; set; } = default!;
 
}

in child component it should not be new() and be default!

q q उपयोगकर्ता को खोजें उपयोगकर्ताओं को खोजने में विफल: [cloud_firestore/failed-precondition] क्वेरी के लिए इंडेक्स की आवश्यकता है। आप इसे यहाँ बना सकते हैं: https:// console.firebase.google.com/v1/r/project/heart-live-64e35/firestore/indexes?create_comp osite=Ck5wcm9qZWN0cy9oZWFydC1saXZILTYO ZTM1L2RhdGFiYXNlcy8oZGVmYXVsdCkvY29sb GVjdGlvbkdyb3Vwcy9Vc2Vycy9pbmRleGVzL18 QARoMCgh1bmlxdWVJZBABGgkKBWlzQmFuEA EaDAoIX19uYW1IX18QAQ

As to explain why your code is wrong
constexpr is meant to eliminate all side effects and to have the calculation doable at compilation time (even though it can also be called during runtime).
As soon as you dereference the non-constexpr this pointer you depend on a runtime instance, no matter what the method will do.

As @Jarod42 pointed out in the comments:
When you make isTrue as a static constexpr method, then you don't need the this pointer and the expression has no more side effects.
Use

if constexpr (isTrue<int>())

or more explicitly

if constexpr (struct serialiser_deserialiser::isTrue<int>())

Yep, using .collectList() will load the entire file content in memory before processing, defeating your purpose of saving memory. On the other hand, using buffer() is good.

It can be done with include()

urlpatterns = [
    path('forgot-password/', ForgotPasswordFormView.as_view()),
    path('api/', include((router.urls, 'app_name'))),
]

https://www.django-rest-framework.org/api-guide/routers/#using-include-with-routers

Playwright has a doc page for this here: https://playwright.dev/docs/test-parameterize#env-files

However, reading environment variables is built into Node.js now, one can do node --env-file=.beta.env app.js, for example. Doc page here: https://nodejs.org/en/learn/command-line/how-to-read-environment-variables-from-nodejs

One can presumably leverage this if running Playwright via CLI, but how would one leverage this if using Playwright via its vscode extension?

I had the exact same problem on here. The thing to keep in mind is that ResponsiveContainer, if it has a relative (percentage) height/width, it needs to have a parent with display of time block so it can inherits its dimension from it.

Consider turning the @click.stop into '@click.prevent.stop'

and handle the closeModal within the zoomOut, zoomIn and downloadImage methods

the .prevent ignores the @click which you've added to the main component while still keeping the closeModal functionality outside of your buttons

I would suggest to indicate the corresponding specification in the name of the device.

Replace '<option value="'+ item.country_name +'">'+ item.country_title +'<option>' with '<option value="'+ item.country_name +'">'+ item.country_title +'</option>' (missing closing tag).

This is the result of work of deadlock prevention protocol. You can attempt to retry the transaction if you've caght this exception. Automatic retries are not yet implemented and will be introduced in later releases.