You do not need Selenium Grid to run tests in parallel. Modern computers have multiple cores or processors - you can utilize this to run tests vertically instead of horizontally.
As your project is based on Java - you can run tests in parallel using the TestNG test runner. Below is an example of how it can be done or configured.
Has anyone found a solution to this problem yet? I encounter the same issue, specifying paths either directly in the jest.config.js or using pathsToModuleNameMapper
use Inline C => Config => LIBS => '-L/home/dennis/perl_extension/inline_c_change_experiment/ -lMyLib';
use Inline C => Config => LIBS => '-L/home/dennis/perl_extension/inline_c_change_experiment/ -lMyLib.so';
no success. I also tried double quotes in both variants.
perf upstream has long had debuginfod client code: `HAVE_DEBUGINFOD_SUPPORT`, which is a compile-time feature. Ask your linux distro to build with that turned on.
The metric defined by the CIE for perceptual difference in colour is delta E (ΔE).
Early definitions used simple equations based on LAB colour space, but as they were refined over the years they grew more complicated, taking into account chroma and hue from LCH as well. Fortunately the conversion to LAB and formulas for delta E are very well defined.
Problem relied in not properly installed and configured nginx ingress controller. By installing it through Helm and deleting all references to traefik to avoid LoadBalancer collision and setting nginx.org/websocket-services: server-service and/or nginx.ingress.kubernetes.io/websocket-services: server-service, we successfully established 101 Switching Protocols with the client.
As the ingress did not have an address, therefore it was never being routed.
I'm experiencing exactly the same difficulties as you. Can you tell me a little more about how you managed to get by with tenant ID of the other tenant?
As downloaded, the names of the files were of the form WorkSans-SomeModifier.ttf, e.g. WorkSans-Light.ttf. I renamed the files to be of the form work_sans_some_modifier.ttf, e.g. work_sans_light.ttf, i.e. snake case. The red squiggles disappeared and I was able to reference those fonts.
I know this thread is ancient, but I stumbled upon it while looking for a solution to the same problem. What I discovered was that I had a combobox with the enter event running code that was triggering first instead of the userform activate event and the activate event never triggered. This was occurring because the offending combobox was first in the userform tab order and when the form showed, it ran immediately. Moving the combobox down in the tab order solved the problem and allowed the activate event to run as it should. It seems like the activate event should take precedence but apparently it doesn't.
I believe you need to have a Start and and End in your process. But that does not prevent you from implementing an infinite loop. In other words, you could just add to your model a transition from E to A which is always true. In Oracle BPM it looks like this:
Where the transition from the ExclusiveGateway to A is unconditional.
Not sure I agree with the accepted answer's comment "what it doesn't depend on is 'feature flag'". The variations mentioned do make sense, regarding 404 -- not able to find or have access to the resource, 451 -- legal reasons. But, in the case of feature flags, a strong case is made by the RFC itself that a 403 is the correct candidate:
You can locate it at: C:\Users"your name"\AppData\Local\Programs\Microsoft VS Code.
You can also find the actual installation directory of your VS Code. For instance, if it's installed at D:\Microsoft VS Code, locate the "code.exe" file. Copy the "code.exe" file to a location on your C drive(C:\Users"your name"\AppData\Local\Programs\Microsoft VS Code\).
However this is only a workaround for local executions! The permanent solution which would work on ci as well is to upgrade your chackra from 2 to 3 as this issue is seem to be a version related one.
The issue occurs because FileReader.readAsArrayBuffer() provides raw binary data, and when interpreted with the wrong encoding, it misreads the £ symbol (0xC2 0xA3 in UTF-8) as £. To fix this, use TextDecoder with UTF-8 encoding
You don't need the Pepper itself to have python3. You would have python3 on your computer that is running the repository. Py3 is only needed for the Openai server file. The instructions mention setting up a python env because youll use python2 for the two scripts that are to run on the Pepper: speechrecognition and module_Dialogue.
I never found the answer to my question, however updating to Ubuntu 24.04 (without resetting my computer) solved the problem. I have no idea why that worked...
Maybe updating the system reset some path... After that, I had to reinstall some R packages that were broken too, hence my believe in some paths that got reset
Well the library is there but the documentation is so limited that using the library is really a pain to find all kinds of method's, they really need to work on that. to create it so simple that everyone can use it. they should build full parameterized client where everyone can work with i am getting sick of all this company asking money for it its fricking opensource.
In Android Studio Meerkat you need to right click on the toolbar > Add to Main Toolbar > Back / Forward.
You can still remove them from customize toolbar menu though as Michael's answer.
regardless of whether you use HTML or not, the web app should be executed as ME and can be accessed by anyone with Google Account. In this context, GmailApp should create a draft in the active user's tray and not in the effective user's tray. Do you have any solution on this?
Reasons:
Blacklisted phrase (1.5): any solution
RegEx Blacklisted phrase (2.5): Do you have any
RegEx Blacklisted phrase (2): any solution on this?
Based on your question, I added the option to set intensity_by='row_percentages' and 'col_percentages' to cvms::plot_confusion_matrix in v1.7.0. Note that a separate intensity measure must be used for sum tiles (when add_sums=TRUE) as described in the docs.
The accepted answer by Sabuj Hassan is incorrect, here is a correction. I've also added package invocation_tree to show the invocation tree of recursive function calls:
import invocation_tree as invo_tree # see link above for install instructions
def counts(x, y, z, make):
if(x + y + z > make):
return False # False indicates going over the 'make'
if x + y + z == make:
print(" {} coin$1 , {} coin$2 , {} coin$5".format(x, y//2, z//5))
return True # True indicates matching 'make'
if x == 0 and y == 0: # start with $5, but don't add $5 after adding $2 or $1
counts(x, y, z+5, make)
if x == 0: # then $2, but don't add $2 after adding $1
counts(x, y+2, z, make)
counts(x+1, y, z, make) # then $1
tree = invo_tree.blocking()
tree(counts, 0, 0, 0, 7) # only up to $7 to keep the tree small
After pressing <Enter> repeatedly this then results in:
Based on a previous answer of @sonle I was able to work around this. Except that instead of using the .offset(x: 5) to align the toggle to the end, I used .scaleEffect(0.6, anchor: .trailing)
It's heavily inspired by Trufflehog, having pre-baked detectors with verification against its live API. The plot twist is that unlike Trufflehog, it can detect secrets that it doesn't have the detector yet. How? Instead of relying on high entropy strings (which tends to give A LOT of false positives), it uses a context aware scanner to extract potential secrets and check its presence in the vault (by comparing its hashes).
Please let me know if this is something that can help solve your problem.
Reasons:
RegEx Blacklisted phrase (2.5): Please let me know
Why are you monitoring someone’s iPhone anyways? that’s very invasive and not okay. if this is one of your boyfriends i hope he found out and left your ass
Which means that the Console.ReadKey is running in the background thread. This is interesting because the Task will not be started immediately, which gives time for other stuff to happen in the mean time (unlike the direct approach).
The main difference between these two is that the former one will continue executing while the latter will block until a key is read (in both examples the Task is not awaited).
Calling the ReadConsoleInput directly is what is causing the issue, here's why I think that: somewhere before ReadConsoleInput is called you are calling some other un-awaited async Console method which does some kind of reading (Console.In.[...], Console.Out.[...]etc.) or something else Console related.
Both Console.ReadKey and the other method are in a deadlock because both are locking on themselves:
Open3d has transformation capabilities. As does boost's geometry among many other libraries.
A camera viewpoint can be expressed as a transformation. You consider an axis (often z) to be the depth after applying the viewpoint. The translation part accounts for the position of the camera while the rotation portions account for the direction it looks.
I believe that Maven Central Repository has strict management policies for validated namespaces to ensure their stability and security. Higher permissions are required. It is recommended to seek official technical support personnel
# list of authentication/permission classes for spectacular's views.
'SERVE_PERMISSIONS': ['rest_framework.permissions.AllowAny'], # <- replace with your permission
By the bottom left panel of the remix interface you will see the plugin tool,
click it and search for "CONTRACT VERIFICATION" and activate it.
once activated you will have a new tool on the let hand panel with a check mark symbol.
Click the tool and input the details (Chain,Contract address and contract name) of the smart contract you deployed.
check all the boxes under the "verify on:" statement.
Thanks to @AndyWilkinson comment, I understood the reason for the error. There were 2 errors:
In my external security library, the Spring config structure was as follows:
@AutoConfiguration
@Import({BasicAndFormAuthConfig.class, OAuth2Config.class})
public class SecuritySupportAutoConfiguration{}
@Order(1)
@Configuration
public class BasicAndFormAuthConfig {}
@Order(2)
@Configuration
public class OAuth2Config {}
With the help of this issue. I realized that using @Order for @Configuration classes is incorrect, you need to use @AutoConfigureOrder. And also that you need to specify @AutoConfigureOrder for the main configuration class with @AutoConfiguration in the external library. To create a custom configuration instead of the default one.
Corrected code:
@AutoConfigureOrder(Ordered.HIGHEST_PRECEDENCE)
@AutoConfiguration
@Import({BasicAndFormAuthConfig.class, OAuth2Config.class})
public class SecuritySupportAutoConfiguration{}
@Configuration
public class BasicAndFormAuthConfig {}
Check for TypeScript Configuration Issues: Review your tsconfig.json for any strict settings that might be causing this behavior. For instance, settings like noImplicitAny or strict can influence type checking. Adjust these settings as necessary:
To all the dummies like me who still had problem understanding this just copy the contents of sqlplus into the conents of instant client and then set the path and oracle home like one of the guys said here and it will work.
Let's see the reverseList() function in action using memory_graph:
import memory_graph as mg # see link above for install instructions
class ListNode:
def __init__(self, val=0, next=None):
self.val = val
self.next = next
def build_list(n = 5):
head = None
for i in range(n, 0, -1):
head = ListNode(i, head)
return head
def reverseList(head: ListNode) -> ListNode:
cur , pre = head, None
while cur:
tmp = cur.next
cur.next = pre
pre = cur
cur = tmp
mg.block(mg.show, mg.get_call_stack()) # graph each reverse step
return pre
head = build_list() # build a test linked list
mg.block(mg.show, mg.get_call_stack()) # graph the test list
head = reverseList(head) # reverse list
mg.show(mg.get_call_stack()) # graph the reversed list
Pressing <Enter> a number of times now results in:
Full disclosure: I am the developer of memory_graph.
Another way where this error can occur is when you have project references outside the solution, and you try and publish a project.
We have multiple solution files that share some common projects, and we forgot to update all solutions with the updated references. This was not caught when building locally in Visual Studio, and only threw an error on publish.
You're in luck, this is a case-folding problem that's been fixed recently. I could reproduce your problem on vespa 8.485.42 but it works as expected in 8.492.15.
The issue in your code arises because df1$gene contains concatenated gene names (e.g., "TMEM201;PIK3CD"), while df2$gene has individual gene names. The %in% operator checks for exact matches, so "PIK3CD" %in% "TMEM201;PIK3CD" returns FALSE.
To fix this, you need to check for partial matches using stringr::str_detect(). Here's a solution using sapply() and str_detect() from the stringr package:
This is a known bug since the most recent Excel update (the one that brought GROUPBY and PIVOTBY off the experimental branch). It's been reported across the internet so hopefully Microsoft is aware and will fix
Thanks for all the great suggestions, it's finally working whereby a double and single quotes around the rsync -e var, got it over the line as seen here -
Traceback (most recent call last):
File "c:\Users\varnet\Desktop\Django_pro\web_project\urls.py", line 17, in <module>
from django.contrib import admin
ModuleNotFoundError: No module named 'django'
If you are working with a team, follow the guidelines of the team. If it's a personal project, it's up to you. It doesn't really have any significant difference in terms of performance or functionality.
The most important thing is consistency. Choose a method that works for your coding style, then stick with it throughout your project for cleaner, more maintainable code.
I personally prefer having multiple media queries and using them where needed, especially since I like to nest my code. This approach feels more natural as it keeps related styles together without jumping around the stylesheet.
The encryption SDK v1.6.1 accepts multi-region keys in KmsMasterKeyProvider for encryption and decryption. Starting with v1.7.0, the multi-region keys are not supported by default in the KmsMasterKeyProvider implementation. The solution is to replace KmsMasterKeyProvider with AwsKmsMrkAwareMasterKeyProvider, the class dedicated to multi-region keys.
I didn't find a solution here, so I wrote my own module for my needs. Then I shared my module here so that others could use it, but my answer was deleted because it was my project. This is crazy.
Stackoverflow has the worst community. I will never write answers here again because of such moderators like you.
